Melden Sie sich zuerst an, um alle Funktionen optimal nutzen zu können!

Acoustical Investigation of Sintered High Porous Metal Fibre Structures as Sound Absorption Material (Englisch)

In: Powder metallurgy   ;  259-264  ;  1998
  • ISBN:
    1899072098
  • Aufsatz (Konferenz)  /  Print

Wie erhalte ich diesen Titel?

Exportieren, teilen und zitieren

© Metadata Copyright the British Library Board and other contributors. All rights reserved.

Inhaltsverzeichnis Konferenzband

Die Inhaltsverzeichnisse werden automatisch erzeugt und basieren auf den im Index des TIB-Portals verfügbaren Einzelnachweisen der enthaltenen Beiträge. Die Anzeige der Inhaltsverzeichnisse kann daher unvollständig oder lückenhaft sein.

2
PM Production of Ni~3Al Matrix Composites Strengthened by Rounded TiC Particles
Spoor, M. B. C. / Brinkman, H. J. / Duszczyk, J. / Katgerman, L. / European Powder Metallurgy Association et al. | 1998
2
Design of a New Type of Atomiser for Metal Powder Production
Dogan, C. / Yildirim, N. / Saritas, S. / European Powder Metallurgy Association et al. | 1998
2
Way to Higher Densities and Eventually to Full Density
Knoess, W. / Schlemmer, M. / European Powder Metallurgy Association et al. | 1998
2
Measurements of Fracture Toughness in a Micrograined Tungsten Carbide using two Different Methods
Rosa, L. G. / Fernandes, J. C. / European Powder Metallurgy Association et al. | 1998
3
Novel Stainless Steels for Metal Injection Moulding
Wohlfromm, H. / Bloemacher, M. / Weinand, D. / Uggowitzer, P. J. / European Powder Metallurgy Association et al. | 1998
8
Dynamic Magnetic Compaction (DMC) Technology for High Density/Net Shape Powder Metal Components
Barber, J. P. / Bauer, D. / Chelluri, B. / Jandeska, W. F. / European Powder Metallurgy Association et al. | 1998
8
Fracture Toughness-Microstructure Relationships in Ultrafine Tungsten Carbide-Cobalt Alloys
Sacks, N. / Allen, C. / Northrop, I. / European Powder Metallurgy Association et al. | 1998
8
Physical Simulation and Computer Modelling of Centrifugal Atomization of Liquid Metals
Zhao, Y. Y. / Dowson, A. L. / Ward, R. M. / Jacobs, M. H. / European Powder Metallurgy Association et al. | 1998
9
Fabrication of Microstructures by MIM and CIM
Benzler, T. / Piotter, V. / Ruprecht, R. / Hausselt, J. / European Powder Metallurgy Association et al. | 1998
13
Study of the Interaction Matrix-Reinforcement through DSC in a AA2014-Ni~3Al Particulate Composite
Da Costa, C. E. / Badia, J. M. / Antoranz-Perez, J. M. / Zapata, W. C. / European Powder Metallurgy Association et al. | 1998
14
Simulation of Robust Production of Water Atomized Powder
Bergquist, B. / Ericsson, T. / European Powder Metallurgy Association et al. | 1998
15
Role of Pore Pressurisation and Pore Surface Energy in Densification of Porous Preforms to near Pore-Free Levels by Impact Powder Forging
Mashl, S. J. / Smith, D. W. / European Powder Metallurgy Association et al. | 1998
15
Hollow PIM Parts made with the Gas Assisted Moulding Technology
Haupt, U. / Walcher, H. / European Powder Metallurgy Association et al. | 1998
15
Reliability Characteristics of Hardmetals
Reshetnyak, H. / Kuebarsepp, J. / European Powder Metallurgy Association et al. | 1998
19
SHS Processing of Aluminide Matrix Composites In-situ Particulate Reinforced
Orban, R. L. / Lawley, A. / European Powder Metallurgy Association et al. | 1998
21
On-line Control of Molten Metal Atomization on the Basis of PDA Measurements in Inert-Gas, Liquid-Gas and Water Atomization
Raimann, J. / Wolf, G. / Cabot, M. S. / Brito, C. / European Powder Metallurgy Association et al. | 1998
21
Porosity and Properties of Warm Compacted High Strength Sintered Steels
Engstroem, U. / Johansson, B. / Rassmus, J. / European Powder Metallurgy Association et al. | 1998
21
A New Method of Evaluation on the Quality of Cemented Carbides in Cyclic Contact Compression Loading
Alexandrova, L. I. / Bondarenko, V. P. / Loshak, M. G. / European Powder Metallurgy Association et al. | 1998
21
Full 3-Dimensional Finite Element Analysis of Powder Injection Moulding Filling Process including Slip Phenomena
Kwon, T. H. / Hwang, C. J. / European Powder Metallurgy Association et al. | 1998
25
Processing of Carbon Fibres Reinforced Titanium Matrix Composites by Powder Metallurgy
Even, E. / Quenisset, J.-M. / Arvieu, C. / Chadeyron, P. / European Powder Metallurgy Association et al. | 1998
27
Comparison of Plastic and Elastic Behaviour of Submicron and Micron-sized WC-Co Grades at Temperatures between 20 to 1000C
Luyckx, S. / Northrop, I. T. / Milman, Y. V. / Goncharuck, V. A. / European Powder Metallurgy Association et al. | 1998
27
Behaviour of Steel Powder Mixes produced by Warm Compaction
St-Laurent, S. / Chagnon, F. / European Powder Metallurgy Association et al. | 1998
27
Surface Layer Thickness Control in Metal Injection Moulding
Alcock, J. R. / Hanson, S. M. J. / Stephenson, D. J. / European Powder Metallurgy Association et al. | 1998
27
Particle Size Distribution of Gas-Atomised Copper produced by Confined Atomisers
Nu�ez, L. A. / Levy, A. / Sepulveda, A. / Lobel, T. / European Powder Metallurgy Association et al. | 1998
31
In-Situ Formed Al-AlN Composite made by Various Consolidation Processes
Takeda, Y. / Kondoh, K. / Takano, Y. / Kimura, A. / European Powder Metallurgy Association et al. | 1998
33
Reflections on Mechanism of Powder Compaction
Shapiro, I. / European Powder Metallurgy Association et al. | 1998
33
Rheological Properties of PIM Feedstocks
Saritas, J. / Karatas, S. / European Powder Metallurgy Association et al. | 1998
33
Experience of Tuning Gas Atomising Nozzles using the Water Bench Technique
Shone, J. / Dunkley, J. J. / European Powder Metallurgy Association et al. | 1998
37
Sintered Ti-TiC Composites
Alman, D. / European Powder Metallurgy Association et al. | 1998
39
Rheology of 316L MIM Powder Plastisols - Effect of Surface Active Additives
Johansson, E. / Nyborg, L. / Becker, J. / European Powder Metallurgy Association et al. | 1998
39
Application of Hill's Method to the Analysis of Powder Compaction in Closed Dies
Bagaviev, A. / Chikanova, N. / Alexandrov, S. / European Powder Metallurgy Association et al. | 1998
40
Nitrogen Atomisation and Characterisation of Duplex Stainless Steel Powders
Zambon, A. / Badan, B. / Ramous, E. / European Powder Metallurgy Association et al. | 1998
40
Preparation of Ultra Fine TiC Dispersed Ni-based Cermet by Mechanical Alloying
Sugiyama, A. / Kobayashi, K. / Ozaki, D. K. / European Powder Metallurgy Association et al. | 1998
43
Characterisation of AI Matrix Composites Reinforced with Intermetallic Powder Particles
Lieblich, M. / Torres-Barreiro, B. / European Powder Metallurgy Association et al. | 1998
45
Synthesis of TiC-Ni(-Mo) Cermet via Mechanical Alloying
Choi, C. J. / Moon, B. G. / Park, W. W. / European Powder Metallurgy Association et al. | 1998
45
Compaction of Powder via a Deformable Discrete Element Approach
Gethin, D. T. / Lewis, R. W. / Ransing, R. S. / European Powder Metallurgy Association et al. | 1998
46
Porosities and Gas Concentrations in Argon and Helium Gas atomised TiAl Alloy Powders
Gerling, R. / Schimansky, F.-P. / Feddersen, U. / European Powder Metallurgy Association et al. | 1998
49
Processing and Mechanical Properties of PM Nb- and Cr-Al~2O~3 Matrix Composites
Garcia, D. E. / Schicker, S. / Janssen, R. / Claussen, N. / European Powder Metallurgy Association et al. | 1998
51
New PIM Joining Process for more Functional and Complicated Parts
Miura, H. / Kentarou, M. / European Powder Metallurgy Association et al. | 1998
51
Use of Computer Simulation in the Measurement of WC Grain Size
Roebuck, B. / McCormick, N. / European Powder Metallurgy Association et al. | 1998
51
Study of Metal Powder Compaction Pressing with use of Numerical Simulations
Oldenburg, M. / Wikman, B. / Haeggblad, H.-A. / European Powder Metallurgy Association et al. | 1998
52
Progress in Inert Gas Atomised Powder for Hydrogen Storage Materials
Hohmann, M. / Scholz, H. / Hugo, F. / European Powder Metallurgy Association et al. | 1998
55
Development of Compressive Torsion-Forming of Metal Powder
Kanetake, N. / Maeda, E. / Choh, T. / European Powder Metallurgy Association et al. | 1998
57
Modelling of Multilevel PM Parts during Compaction and Ejection
Kumar, R. K. / Ashok, S. / European Powder Metallurgy Association et al. | 1998
57
Development of the Microstructure in Cemented Carbides between 25-1000C and the Relationship to their Properties in Technical Applications
Kindermann, P. / Schleinkofer, U. / Sockel, H.-G. / Heinrich, W. / European Powder Metallurgy Association et al. | 1998
57
Sintering Behaviour of the PIMed W-Cu Nanocomposite Powder
Lee, J.-S. / Yoon, E.-S. / Yu, J.-H. / European Powder Metallurgy Association et al. | 1998
58
Platinum Powders for Dispersion Hardened Materials
Edtmaier, C. / Schreier, G. / European Powder Metallurgy Association et al. | 1998
61
Properties of TiC-Dispersion Strengthened Copper Alloys at Room and Elevated Temperatures
Weissgaerber, T. / Sauer, C. / Kieback, B. / Soyez, G. / European Powder Metallurgy Association et al. | 1998
63
Influence of the Manufacture Process to obtain WC+Co Thermal Spraying Powders. Effects on the Powder Characteristics and Coating Properties
Guilemany, J. M. / Sanchez, J. M. P. / European Powder Metallurgy Association et al. | 1998
63
Metal Injection Moulding of 2.5% SiFe and 3% SiFe Alloy for Soft Magnetic Applications
David, F. / Leroy, Y. / European Powder Metallurgy Association et al. | 1998
63
Constitutive Equation for Metal Powder Compaction
Aryanpour, G. / Stutz, P. / European Powder Metallurgy Association et al. | 1998
66
Numerical Simulation of Atomisation Gas Flows
Espina, P. I. / Ridder, S. D. / Piomelli, U. / Biancaniello, F. S. / European Powder Metallurgy Association et al. | 1998
67
In-Situ Process for producing Titanium based Metal Matrix Composite
Kim, Y.-J. / Chung, H. / European Powder Metallurgy Association et al. | 1998
69
Fabrication and Properties of Injection Moulded Hardmetal Parts by use of a Pressure Die Casting Machine
Raduta, M.-S. / Groetzschel, G. / Kaschta, J. / Rosiwall, S. M. / European Powder Metallurgy Association et al. | 1998
69
Non-Destructive Phase Composition and Cutting Properties Control of Cemented Carbide Tool Inserts
Dudkin, E. / Plotnikov, A. / Diperstain, M. / European Powder Metallurgy Association et al. | 1998
69
Integration of a New Viscoplastic Constitutive Equation in a Finite Element Code
Sanchez, L. / Ouedraogo, F. / Stutz, P. / Dellis, C. / European Powder Metallurgy Association et al. | 1998
72
Iron Powder with Low Oxygen Content
Axmin, E. V. / European Powder Metallurgy Association et al. | 1998
73
Densification of Porous AI Matrix Composites prepared by Reactive Sintering
Feng, C. F. / Froyen, L. / European Powder Metallurgy Association et al. | 1998
75
Effect of Lubricants on Compacting Performance
Suzuki, H. / Lutheran, M. E. / Seki, Y. / Sawayama, T. / European Powder Metallurgy Association et al. | 1998
75
Evaluation of the Binder Burnout Step of Injection Moulded Specimens
Rodrigues, D. / Tschiptschin, A. P. / European Powder Metallurgy Association et al. | 1998
75
Features of Wear of TiC-Base Hardmetals
Kuebarsepp, J. / Reshetnyak, H. / Pirso, J. / Annuka, H. / European Powder Metallurgy Association et al. | 1998
76
Innovative Carbonyl Iron Powder Materials
Friederang, A. W. / Schlegel, R. / European Powder Metallurgy Association et al. | 1998
79
Forming of Metal-Ceramic Composite Pipes by Multi-Billet Extrusion Method
Chen, Z. / Ikeda, K. / Murakami, T. / Takeda, T. / European Powder Metallurgy Association et al. | 1998
80
Progress in Cost Reduction for Sintering and Overpressure Sintering of Hardmetals
Ermel, D. / European Powder Metallurgy Association et al. | 1998
81
Comparison of Two Debinding Procedures Based on Solvent Extraction
Wendhausen, P. A. P. / Fredel, M. C. / Do Nascimento, R. M. / Justino, J. G. / European Powder Metallurgy Association et al. | 1998
81
Uniaxial Compression Tests of Metal Powder Compacts
Riera, M. D. / Prado, J. M. / European Powder Metallurgy Association et al. | 1998
81
Characterisation of Water Atomised Steel Particles by Scanning Electron Microscopy
Estrada, J. L. / Herrera, H. / Jaramillo, D. / Juarez, F. / European Powder Metallurgy Association et al. | 1998
85
Fabrication of Alumina Chopped Fibre Reinforced Titanium Matrix Composite by Hot-Pressing
Kamiya, A. / Naganuma, K. / European Powder Metallurgy Association et al. | 1998
85
Development of Uniform Powder Filling Method - Aeration Powder Filling
Kondoh, M. / Takemoto, S. / Urata, I. / European Powder Metallurgy Association et al. | 1998
86
Factors Affecting Performance of Cemented Carbide Tools in Printed Circuit Board Drilling
Aucote, J. / Grearson, A. / European Powder Metallurgy Association et al. | 1998
87
Characterisation of a Mechanically Alloyed Ag-Al System
Esquival, R. / Jaramillo, G. D. / Estrada, J. L. / European Powder Metallurgy Association et al. | 1998
89
Cyclic Creep of Al~4C~3 Reinforced Aluminium
Zrnik, J. / Besterci, M. / Kovac, L. / European Powder Metallurgy Association et al. | 1998
91
Improvement of Dimensional Tolerance for Automotive PM Parts by Aeration Powder Filling Method
Urata, I. / Takemoto, S. / Kondoh, M. / European Powder Metallurgy Association et al. | 1998
91
Numerical Simulation of Feedstock Melt Filling in a Cylindrical Cavity with Solidification in Powder Injection Moulding
Qu, X. / Li, Y. / Yue, H. / Huang, B. / European Powder Metallurgy Association et al. | 1998
93
Oxidation of (Ti, Mo)C Carbide
Voitovich, V. / European Powder Metallurgy Association et al. | 1998
94
Tribological Behaviour of Al-Si-Al~2O~3 Composites
Bialo, D. / Duszczyk, J. / European Powder Metallurgy Association et al. | 1998
94
Influence of Mixing Technology on the Manufacturing and Performance of some PM Parts
Penafiel, J. / Bas, J. A. / Molins, C. / European Powder Metallurgy Association et al. | 1998
97
Injection Moulded 97W-2Ni-Fe Heavy Alloy
Li, Y. M. / Qu, X. H. / Li, Z. L. / Huang, B. Y. / European Powder Metallurgy Association et al. | 1998
97
Manufacturing of Iron Aluminide Sheet using PM Technology
Hajaligol, M. / Deevi, S. C. / Lilly, A. C. / Sikka, V. K. / European Powder Metallurgy Association et al. | 1998
99
Mechanisms of Hardmetal Solid and Liquid Phase Sintering
Pereira da Silva, A. G. / Schubert, W.-D. / Lux, B. / European Powder Metallurgy Association et al. | 1998
99
Pitting Corrosion of 15vol%SiCw/AA2124 Composites
Hwang, W. S. / Seo, W. C. / Jo, C. J. / European Powder Metallurgy Association et al. | 1998
100
High Green Strength Copper Powders for Friction and Other PM Applications
Blossom, N. / Kelley, H. / Klatt, K. / Poole, J. / European Powder Metallurgy Association et al. | 1998
103
Development of RIP (Rubber Isostatic Pressing) Technology for Powder Compaction
Sagawa, M. / Nagata, N. / Watanabe, T. / Itatani, O. / European Powder Metallurgy Association et al. | 1998
103
Evaluations of Binder Systems for Supercritical Carbon-Dioxide Debinding Process
Shimizu, T. / Murakosi, Y. / Sano, T. / European Powder Metallurgy Association et al. | 1998
104
Metal-Ceramic Coatings Based on Fe-Ni-Cu Composites Powder Systems
Pleskachevsky, Y. / Kovtun, V. A. / Shuvalov, V. B. / European Powder Metallurgy Association et al. | 1998
105
Properties and Composition of the TiC-NbC Based Cemented Carbides
Bodrova, L. / Lazarjuk, V. A. / Kramar, H. M. / European Powder Metallurgy Association et al. | 1998
106
Cold Forming of Powder Metal Wires
Bochniak, W. / European Powder Metallurgy Association et al. | 1998
109
Hybrid Expert System of Debinding Cycles Planning for PIM
Ying, S. / Schaeffer, L. / European Powder Metallurgy Association et al. | 1998
109
Finite-Element Simulation of Warm Compaction Process
Koeller, R. / Massinger, J. / European Powder Metallurgy Association et al. | 1998
110
Microstructural Study of Mechanically Alloyed Aluminium with Nanometer Size Silicon Carbide Powder
Costa, J. / Fort, J. / Roura, P. / Viera, G. / European Powder Metallurgy Association et al. | 1998
110
Carbide Titanium and Vanadium Alloys for Cutting Tools
Bodrova, L. / European Powder Metallurgy Association et al. | 1998
112
Explosion-Proof Production of Metal Powders
Neikov, O. D. / Vasiliyeva, G. I. / Rabin, P. B. / Tokhtuyev, V. G. / European Powder Metallurgy Association et al. | 1998
114
Friction: Experimental Equipment and Measuring
Doremus, P. / Pavier, E. / European Powder Metallurgy Association et al. | 1998
115
Calculation and Analysis System for PIM Process
Haozhuan, L. / Baiyuan, H. / Xuanhui, Q. / Yimin, L. / European Powder Metallurgy Association et al. | 1998
115
Physicochemical Bases of Forming Nanostructures in the Binding Phase of Cemented Carbides
Lisovsky, A. F. / European Powder Metallurgy Association et al. | 1998
116
Cold Compaction of Mixed Metal Powders
Kim, K. T. / Kim, J. S. / European Powder Metallurgy Association et al. | 1998
118
Size Control of Tungsten Powder Synthesised by SHS (Self-Propagating High Temperature Synthesis) Process
Won, C.-W. / Jung, J.-C. / Ko, S.-K. / Lee, J.-H. / European Powder Metallurgy Association et al. | 1998
119
Investigation of Thermal Conductivity of Hexanite-R by Solving of Ill-Defined Problems
Isayev, K. / Bloschanevich, A. / Bochko, A. / Lapteva, A. / European Powder Metallurgy Association et al. | 1998
120
Measurement of Friction during Metal Powder Compaction
Solimannezhad, N. / Larsson, R. / European Powder Metallurgy Association et al. | 1998
123
Surface Chemistry of Water-Atomised High-Alloyed Al-Zn-Mg-Cu Base Powders
Neikov, O. / Krajnikov, A. V. / European Powder Metallurgy Association et al. | 1998
123
Densification Behaviour of Copper Powder Compacts Reinforced with Tungsten Wires
Kim, K. T. / Kim, H. K. / European Powder Metallurgy Association et al. | 1998
123
Effect of Microstructure and Shape on the Performance of PM Bearing Caps
Ratzi, R. / Seyrkrammer, J. / European Powder Metallurgy Association et al. | 1998
124
Wear Resistance of PVD Coated PM Materials Cutting Tools
Musialek, K. / Smith, A. B. / Ciskal, M. / Pofelska-Filip, I. / European Powder Metallurgy Association et al. | 1998
126
Modelling of Selective Full Densification of PM Parts
Naidu, R. / Ashok, S. / Kumar, P. K. / European Powder Metallurgy Association et al. | 1998
129
Effect of Carbon Content and Post-Sintering Cooling Rate on Mechanical Properties of High Density Sintered Materials made from Diffusion-Bonded Powders
Tremblay, L. / Chagnon, F. / European Powder Metallurgy Association et al. | 1998
129
Rapidly Solidified Aluminium Alloy Powders
Neikov, O. D. / European Powder Metallurgy Association et al. | 1998
130
TEM Study of SiC and Second Phase Particles in PM Aluminum Matrix Composites
Mourisco, A. / Ambrozio Filho, F. / Goncalves, M. / European Powder Metallurgy Association et al. | 1998
132
Pressure Development inside Extruder Nozzles as a Function of the Temperature and the Plasticity of Press Masses when Extruding Carbide Rods before Sintering
Friedrichs, K. / European Powder Metallurgy Association et al. | 1998
132
Combination of Warm Compaction Technology and CNC Press Technology
Sugimoto, M. / Okamura, T. / Oka, M. / Komatsu, K. / European Powder Metallurgy Association et al. | 1998
135
Investigation of the Factors affecting Metal Powder Production by Electric Arc Atomisation
Dogan, C. / Yilmaz, N. F. / Saritas, S. / European Powder Metallurgy Association et al. | 1998
135
Review on the Fatigue Behaviour of Pressed and Sintered Ferrous Materials
Weiss, B. / Danninger, H. / Hadrboletz, A. / European Powder Metallurgy Association et al. | 1998
136
Metal-Matrix Composite Coatings based on Iron Borides
Sukhovaya, Y. / Vashchenko, A. / European Powder Metallurgy Association et al. | 1998
139
Production and Properties of High Strength High Density Helical Gears
Mahn, A. / Cohrt, H. / European Powder Metallurgy Association et al. | 1998
140
Microstructure and Properties of Various Cermets Strengthened by Ultra-fine Shock-wave Particles
Gordeev, Y. / Bucaemsky, A. / Zeer, G. / Teremov, S. / European Powder Metallurgy Association et al. | 1998
140
Fundamental Considerations for the Net Shaping of the PM-MMCs and their Properties in Correlation with the Processing Method
Orban, R. L. / Domsa, S. / Dobra, T. / Constantinescu, V. / European Powder Metallurgy Association et al. | 1998
141
Structure Model of Light Amorphisation of Ni-Nb-(Ta, V) Alloys by Using the Melt Quenching Process
Savin, V. / Kostenko, E. / Vagin, A. / European Powder Metallurgy Association et al. | 1998
143
Rolling Contact Fatigue Behaviour of Sintered Steels - Endurable Hertzian Pressures and Damage Mechanisms
Lipp, K. / Sonsino, C. M. / Pohl, D. / Hock, S. / European Powder Metallurgy Association et al. | 1998
145
Production of Femanal Powders by Plasma Rotating Electrode Process
Ozols, A. / Bilmes, P. D. / Llorente, C. L. / Sirkin, H. R. / European Powder Metallurgy Association et al. | 1998
146
Influence of Blending and Particle Distribution on Base Aluminium MMC's
Ruiz-Navas, E.-M. / Da Costa, C. E. / Ruiz-Roman, J. M. / Cambronero, L. E. G. / European Powder Metallurgy Association et al. | 1998
146
Distribution of Cr and V in the Phases of Cemented Carbides WC-Co
Chabretou, V. / Lavergne, O. / Lay, S. / Allibert, C. / European Powder Metallurgy Association et al. | 1998
147
New Tooling Structure and Application Product of Warm Compaction
Ueda, K. / Asaka, K. / Kagaya, T. / Kashima, T. / European Powder Metallurgy Association et al. | 1998
149
Material Development for High Fatigue Endurance Limit
Blanchard, P. / Mignot, J.-F. / Talowski, C. / European Powder Metallurgy Association et al. | 1998
151
Interaction between Iron-base Melts and Gas-carrier of Energy in the Process of Producing Metallic Powders by Atomisation
Muraviova, E. L. / European Powder Metallurgy Association et al. | 1998
152
Comparison of the Properties of Ultrafine and Conventional Hardmetals
Missol, W. / Karwata, T. / Krajzel, J. / Bujok, J. / European Powder Metallurgy Association et al. | 1998
152
Sintered Aluminium Matrix Composites and their Antifriction Properties
Rusin, N. / Savitskii, A. / European Powder Metallurgy Association et al. | 1998
153
Dynamics of Pressing of a Porous Viscoelastic Strain Hardenable Body
Kovalchenko, M. / Doremus, P. / European Powder Metallurgy Association et al. | 1998
155
Fatigue Properties of Advanced High Density Powder Metal Alloy Steels for High Performance Powertrain Applications
Jones, P. K. / Buckley-Golder, K. / David, H. / Lawcock, R. / European Powder Metallurgy Association et al. | 1998
157
Reinforcements for Metal Matrix Composites produced by Powder Metallurgy
Rossi, J. L. / European Powder Metallurgy Association et al. | 1998
157
Structural Characteristics in Rapidly Solidified Iron Base Ledeburitic Type Powders
Jurci, P. / Pavel, S. / European Powder Metallurgy Association et al. | 1998
158
Interface Aspects in Cobalt-based Diamond Cutting Tool Segments
Akyuez, D. A. / Hofmann, H. / European Powder Metallurgy Association et al. | 1998
159
Combined Elastic-Plastic-Viscous Model for PM Deformation Processes
Gorokhov, V. / Doroshkevich, E. A. / European Powder Metallurgy Association et al. | 1998
162
Comparative Analysis of the Structure and Properties of Al/SiC(p) Composite Materials as a Function of PM Processing Route
Gingu, O. / Rosso, M. / Ubertalli, G. / European Powder Metallurgy Association et al. | 1998
163
Optimisation of Good-to-Bad Powder Size Ratio Output in Atomisation Processes
Belyanchikov, L. N. / Grigoryian, V. A. / European Powder Metallurgy Association et al. | 1998
164
Microwave Enhanced Reactive Sintering of Composites on BN-SiC Base
Brozek, V. / Dufek, V. / Hajek, M. / European Powder Metallurgy Association et al. | 1998
165
Numerical Modelling of the Densification Kinetics of Metal Powders during Resistance Sintering under Pressure
Montes, J. M. / Rodriguez, J. A. / Herrera, E. J. / European Powder Metallurgy Association et al. | 1998
167
Wear Resistant MMC with Improved Toughness and Corrosion Resistance
Berns, H. / European Powder Metallurgy Association et al. | 1998
168
Investigation on the Interface Formation between Intermetallic Particles and Aluminium Matrix
Salvador, M. D. / Amigo, V. / Ferrer, C. / Busquets, D. / European Powder Metallurgy Association et al. | 1998
168
Preparation of Tungsten Carbonitride Powder by Heating Tungsten Powder in Nitrogen Gas
Asaka, N. / Igarashi, T. / Doi, Y. / Hayashi, K. / European Powder Metallurgy Association et al. | 1998
168
Plasma Rotating Electrode Atomisation and Drop Remelting of Chromium Alloys in Rotating Ingot Moulds: Comparison of Structure and Properties
Belyanchikov, L. N. / Grigoryian, V. A. / European Powder Metallurgy Association et al. | 1998
171
Die Wall Lubrication Studies at SFL
Rastogi, S. / Srinivasan, S. / Ashok, S. / Murali, G. K. / European Powder Metallurgy Association et al. | 1998
173
Gas Atomisation of Nickel Aluminides Powders
Zambon, A. / Badan, B. / Ramous, E. / European Powder Metallurgy Association et al. | 1998
173
Effect of V on the Strength of Sintered Cr-Mo Alloyed Steel Powder Compacts
Unami, S. / Ogura, K. / Uenosono, S. / European Powder Metallurgy Association et al. | 1998
173
Formation of very Fine Crystal Nucleus into WC Particle by Inhibitor Addition Technique
Yoshiharu, Y. / Doi, Y. / Honkawa, S. / Asada, N. / European Powder Metallurgy Association et al. | 1998
174
Cryofracture Techniques used in the Study of Ni~3Al Particles on Aluminium Matrix Composite
Amigo, V. / Salvador, M. D. / Ferrer, C. / Busquets, D. / European Powder Metallurgy Association et al. | 1998
177
Simulation of Die Compaction: the Example of a Part made with Tungsten Powder
Doremus, P. / Imbault, D. / Bonnefoy, V. / Nicolas, G. / European Powder Metallurgy Association et al. | 1998
179
Solidification Rates in Centrifugal Atomisation
Ozols, A. / Sancho, E. / European Powder Metallurgy Association et al. | 1998
179
Structural Characterisation of WC+Co-Cr Sintered and Crushed Powders
Guilemany, J. M. / Molino, J. S. / European Powder Metallurgy Association et al. | 1998
179
Processing, Microstructure and Properties of PM 0.6%C Manganese Steels
Cias, A. / Mitchell, S. C. / Wronski, A. S. / European Powder Metallurgy Association et al. | 1998
180
Mechanical Characterisation of Al-NbC Composites produced by Powder Metallurgy Route
Valdes Serra, J. C. / Schroer, G. / Luiz Rossi, J. / Robert, M. H. / European Powder Metallurgy Association et al. | 1998
183
Comparative Study of Various High Density Processes
Gopy, S. L. / Rastogi, S. / Hariharan, M. / Srinivasan, S. / European Powder Metallurgy Association et al. | 1998
185
Diamond-like Carbon Films on Sintered Carbides - Technology and Wear Resistance Evaluation
Richter, J. / Hutchings, I. M. / Clyne, T. W. / Peng, X. / European Powder Metallurgy Association et al. | 1998
185
Hollow Copper and Bronze Powder Particles for Manufacturing of Cellular Structures
Danninger, H. / Strobl, S. / Guertenhofer, R. / European Powder Metallurgy Association et al. | 1998
185
Wear Behaviour of Nitrided Low Alloyed Steels Based on Fe - 3.5% Mo
Candela, N. / Anton, N. / Gordo, E. / Moreira, W. / European Powder Metallurgy Association et al. | 1998
186
Thin-Walled Metal-Matrix Composite with Complex Shapes
Golub, M. / Yakushin, A. / Matveyenkov, A. / Ponomaryov, V. / European Powder Metallurgy Association et al. | 1998
187
Determination of the Mechanical Properties of Green Compacts Depending on the Mix Chemical Composition
Molera, P. / Bas, J. A. / Bolarin, M. A. / Sanchez, F. / European Powder Metallurgy Association et al. | 1998
189
Manufacturing and Characterisation of Low Density Titanium Parts
Stiller, C. / Buchkremer, H. P. / Joos, R. / Stoever, D. / European Powder Metallurgy Association et al. | 1998
191
Microstructure and Morphology of ZnO Powders derived by Freeze-Drying Method
Zakula, Z. / Marinkovic, B. / Nikolic, N. / Milosevic, O. / European Powder Metallurgy Association et al. | 1998
191
Effect of the Various Factors on the Dimensional Changes on Sintering of Fe-Cu-C Powder Compacts
Suzuki, Y. / Fukinaga, M. / Minegishi, T. / Omura, T. / European Powder Metallurgy Association et al. | 1998
191
Effect of Coated Whiskers on the Mechanical Properties of SiC Whisker Reinforced Silicon Nitride Ceramic Composite
Cho, W.-S. / Kyung, B. I. / Iung, K. W. / European Powder Metallurgy Association et al. | 1998
193
Features of Controlling the Concentration of Electrical Discharge Energy in a Liquid for Compacting Powders
Chtifanov, A. / Potapenko, A. N. / Knyasev, M. K. / European Powder Metallurgy Association et al. | 1998
195
Sintering and Characterisation of Highly Porous Metal Fibre Structures and use as Sound Absorption Material
Lotze, G. / Stephani, G. / Budach, P. / Albracht, F. / European Powder Metallurgy Association et al. | 1998
197
Production of Boron-Containing Iron Powders by the Rotating Electrode Process
Spiridonova, I. / Sukhovaya, Y. / European Powder Metallurgy Association et al. | 1998
197
Quantification of the cBN - hBN Transformation and Production of cBN Based Cermets by HIP
Otegui, E. J. / Iturriza, I. / Ayala, V. / Martin, J. / European Powder Metallurgy Association et al. | 1998
197
Optimisation of Properties of Sintered PM Steels by Statistical Modelling
Norden, C. / Salwen, A. / Wiberg, S. / Skoglund, P. / European Powder Metallurgy Association et al. | 1998
199
The Modelling of Dynamic Processes during Compacting of Powders using Detonation Effect of Combustible Gas Mixtures
El Hammoudani, A. / Potapenko, A. N. / Korsunov, M. K. / European Powder Metallurgy Association et al. | 1998
201
Processing and Characteristic Parameters of Filter Parts with Asymmetrical Porosity
Buchkremer, H. P. / Kuhstoss, A. / Neumann, P. / Arnold, V. / European Powder Metallurgy Association et al. | 1998
202
Quantitative Evaluation of Solidification Microstructures in Centrifugally Atomised Powders
Bonetto, R. / Ozols, A. / Ladaga, J. / Sancho, E. / European Powder Metallurgy Association et al. | 1998
203
Nitrogen-Based Atmospheres for Sintering Carbon Steel Components
Garg, D. / Berger, K. R. / Marsden, J. G. / Plicht, G. / European Powder Metallurgy Association et al. | 1998
203
Preparation of Niobium Carbide from an Organometallic Precursor
Souza, C. P. / Medeiros, F. F. P. / Umbelino Gomes, U. / Ciaravino, C. / European Powder Metallurgy Association et al. | 1998
205
High Accuracy Complex Rotor Technology and Equipment for Mass Production of PM Parts
Leshchinsky, V. / Plewinski, A. / Weinert, H. / European Powder Metallurgy Association et al. | 1998
208
Characterisation of Hot Pressing Behaviour of Diamond Cutting Tools
Karagoez, S. / Zeren, M. / European Powder Metallurgy Association et al. | 1998
208
Non-Destructive Method of Testing Porous Materials
Makarov, A. / Antsiferov, V. / Karasik, A. / European Powder Metallurgy Association et al. | 1998
208
Production of Ultrafine High Purity Tungsten Powder from Scheelite by Self-Propagating High-Temperature Synthesis
Radovanka, C. / Jokanovic, V. / Djurkovic, G. / Zivanovic, P. / European Powder Metallurgy Association et al. | 1998
209
Metal Open Cell Foam for Catalytic Converters
Makarov, A. / Antsiferov, V. / European Powder Metallurgy Association et al. | 1998
211
Researches on 2D Modelling of the Cold Rolling Process for obtaining Strip Bands from Metallic Powders
Domsa, S. / Vasile, R. / European Powder Metallurgy Association et al. | 1998
212
Relative Stiffness of High Porous Powder Composites
Podrezov, Y. M. / Borodianska, H. Y. / Verbylo, D. G. / European Powder Metallurgy Association et al. | 1998
213
Effects of Various CuSn-Alloying Systems as Selected Bonding Material in Hot Pressing Processing Diamond Tools
Borel, J.-M. / Gartner, B. / European Powder Metallurgy Association et al. | 1998
213
Brass Powder Production by the Displacement from Saline Solutions
Frydrych, H. / Frydrych, J. / Lezanski, J. / Sowa, M. / European Powder Metallurgy Association et al. | 1998
217
'Surface Effect' in Porous Permeable Sintered Layers
Vida-Simiti, I. / Domsa, S. / European Powder Metallurgy Association et al. | 1998
217
Consolidation of Amorphous Powder and Quasi-crystal Powder by Pulse Current Sintering
Ozaki, K. / Kobayashi, K. / Sugiyama, A. / European Powder Metallurgy Association et al. | 1998
217
Processing and Properties of Metal-Bonded Coated Diamond Composites
Karwan-Baczewska, J. / Gotman, D. I. / Gutmamas, E. Y. / European Powder Metallurgy Association et al. | 1998
219
Crystal Structure of Rapid Cooled Aluminium Powders
Arghir, G. / Abrudan, E. / European Powder Metallurgy Association et al. | 1998
219
Effect of Carbon on the Mechanical Behaviour of Ultra-High Boron Steels
Jimenez, J. A. / Acosta, P. / Ruano, O. A. / European Powder Metallurgy Association et al. | 1998
221
Peculiarities of Porous Structure and Properties of Permeable Molybdenum-Copper Pseudoalloys
Tchernychev, L. / European Powder Metallurgy Association et al. | 1998
221
Development of a Hot Die Pressing Laboratory Test
Viot, P. / Ouedraogo, E. / Stutz, P. / European Powder Metallurgy Association et al. | 1998
223
Features of Structure and Mechanical Properties of Hardmetal produced by Low-Temperature Pressing of Submicron WC/Ni Powder
Laptev, A. / Ponomarev, S. S. / European Powder Metallurgy Association et al. | 1998
224
Influence of Degree of Homogenisation on the Apparent Density of a Binar Mixture of Powders
Matei, G. / Orban, R. / Mangra, M. / European Powder Metallurgy Association et al. | 1998
225
New Technology for Production of High-Effective Porous Materials with Adjusted Pore Structure, Designed for Filtration of Gases and Liquids
Rak, A. L. / Ilyuschenko, A. F. / Maziuk, V. V. / Pilinevich, L. P. / European Powder Metallurgy Association et al. | 1998
225
Enhanced Sintering of Experimental Fe-Mo-Cr-C Alloy Steel Powders through Phosphorus Alloying Additions
Bolton, J. / Othman, M. / Becker, B. S. / European Powder Metallurgy Association et al. | 1998
227
Powder Forging on Fully Automatic 'Lasco' Press Lines
Fey, K. / European Powder Metallurgy Association et al. | 1998
229
Hot Pressed Binder-Diamond Type Composites
Vukoman, J. / Curcic, R. / Djurkovic, G. / Zivanovic, P. / European Powder Metallurgy Association et al. | 1998
230
Crucible Free Gas Atomisation of Special Metals and Alloys
Hort, N. / Kainer, K. U. / European Powder Metallurgy Association et al. | 1998
231
Effect of Vibration Parameters on a Formation Process and Properties of Porous Powder Materials
Pilinevich, L. P. / European Powder Metallurgy Association et al. | 1998
231
Cyclic Properties of Differently Heat Treated PM Steels
Lang, K.-H. / Neubauer, A. / Voehringer, O. / Loehe, D. / European Powder Metallurgy Association et al. | 1998
233
Advanced Processing of Metal Profiles via Extrusion
Knuewer, M. / Weber, M. / European Powder Metallurgy Association et al. | 1998
233
New Method for Producing Ultrafine Powder of Titanium Dihydride
Deletang, K. / Even, D. / Bobet, J. L. / Arvieu, C. / European Powder Metallurgy Association et al. | 1998
234
Surface Processing of Ultrahard Materials used for Embedding in Resin or Metallic Matrices
Musu-Coman, M. / Fecioru, M. / Baluta, G. / Amici, N. / European Powder Metallurgy Association et al. | 1998
235
Manufacture of Porous Long Products from Titanium Powders by Discharge Sintering
Beliavin, K. E. / Min'ko, D. V. / European Powder Metallurgy Association et al. | 1998
237
High Performance Ferrous PM Materials using Multi-Component Fine Powder
Yoshida, M. / Seki, Y. / European Powder Metallurgy Association et al. | 1998
239
Electrolytic Copper Powders - A New Lease of Life
Mais, B. / Mowbray, G. A. / European Powder Metallurgy Association et al. | 1998
239
Structure and Properties of Sintered, Iron-Bronze Structural Materials
Frydrych, H. / Frydrych, J. / Gacek, S. / Radori, A. / European Powder Metallurgy Association et al. | 1998
240
Study of Constitutive Behaviour of Powders for Application to Simulation of Compaction Processes
Shima, S. / Kotera, H. / European Powder Metallurgy Association et al. | 1998
240
Application of Pressure Swing Granulation to Hardmetal Granulation Process
Nishii, K. / Sonoda, H. / Kamiya, H. / Horio, M. / European Powder Metallurgy Association et al. | 1998
243
Development of a Low Alloy Iron Powder for a Water Pump Hub Part
Srinivasan, S. / Murali, K. / European Powder Metallurgy Association et al. | 1998
245
Deformation and Fracture Mechanism of Aluminium Foams
Simancik, F. / Kovacik, J. / Sedliakova, N. / European Powder Metallurgy Association et al. | 1998
245
Diffusion Bonding of Nickel Metal Powders on Iron Powders: a Microstructural Study
Miani, F. / Zambon, A. / Ramous, E. / European Powder Metallurgy Association et al. | 1998
247
Material Selection for Synchroniser Hubs
Hariharan, M. / Ashok, S. / European Powder Metallurgy Association et al. | 1998
247
Tribology of High Speed Steel Base Composites
Oliveira, M. / Martins, I. M. / Bolton, J. D. / Jouanny-Tresy, C. / European Powder Metallurgy Association et al. | 1998
247
On-line Control of Synthetic Sintering Atmospheres
Wiberg, S. / Andersson, R. / Laumen, C. / Pardo, X. / European Powder Metallurgy Association et al. | 1998
251
Manufacturing Optical Materials Zn-Se and Zn-S by the PM Technology
Golub, M. A. / Ryzhikov, E. N. / Marinin, S. F. / Matveyenkov, A. P. / European Powder Metallurgy Association et al. | 1998
251
Some Characteristics of Stabilised Electrolytic Copper Powder
Radisavljevic, L. / Dumitraskovic, D. / Pavlovic, M. G. / Nikolic, N. D. / European Powder Metallurgy Association et al. | 1998
253
On-Line Measurement of Sintering Atmospheres
Arvidsson, J. / Eriksson, O. / European Powder Metallurgy Association et al. | 1998
253
Porous Ozone Disperser from Sintered Powder of Technically Pure Titanium
Anaschenko, M. / Bedenko, S. / Pilinevich, L. / Savich, V. / European Powder Metallurgy Association et al. | 1998
253
Wear Behaviour of M3/2 High Speed Steel Reinforced with NbC and TaC
Gordo, E. / Anton, N. / Candela, N. / Ruiz-Prieto, J. M. / European Powder Metallurgy Association et al. | 1998
253
Manufacturing of PM Steels with High Carbon Accuracy
Bas, J. A. / Pe�afiel, J. / Molins, C. / European Powder Metallurgy Association et al. | 1998
257
Composite Materials on the Basis Powders Fe-S making in Vibrating Layer
Hlevunov, S. A. / Lyulko, V. G. / Oleinikov, D. V. / Necrasov, D. V. / European Powder Metallurgy Association et al. | 1998
259
Microstructural Development and Phase Transformations in Fe-4C-12Cr-13V RS Powder during Annealing
Jurci, P. / Hejdova, H. / Vojtech, D. / Dostrasilova, H. / European Powder Metallurgy Association et al. | 1998
259
Development of a Powder Metal Stainless Steel for High Temperature Tribological Applications
Whitaker, I. / Maulik, P. / Purnell, C. G. / European Powder Metallurgy Association et al. | 1998
259
Acoustical Investigation of Sintered High Porous Metal Fibre Structures as Sound Absorption Material
Albracht, F. / Budach, P. / Lotze, G. / Schneider, K. / European Powder Metallurgy Association et al. | 1998
261
TGA-FTIR Evaluation of the Dewaxing Process
Andersson, S. / Ahlqvist, A. / European Powder Metallurgy Association et al. | 1998
262
Alloy Powder 'with coral-like' Particles and its Properties
Pioro, E. / Pioro, N. / Katrus, O. / European Powder Metallurgy Association et al. | 1998
265
Tribological Investigations of PM Stainless Steels mixed with HCX23 against Al~2O~3 & SiC
Kjeldsteen, P. / European Powder Metallurgy Association et al. | 1998
265
Powder Injection and Formation of Porosity in Spray Forming
Banhart, J. / Knuewer, M. / European Powder Metallurgy Association et al. | 1998
265
Multivariate Analysis of Iron-Phosphorus PM Steel
Bergquist, B. / European Powder Metallurgy Association et al. | 1998
266
Experimental Studies of Zinc Stearate Delubrication in High Temperature Sintering of Ferrous Compacts
Legzdins, C. F. / Samarasekera, I. N. V. / Troczynski, T. / European Powder Metallurgy Association et al. | 1998
267
Bistructural Iron Powder
Pioro, N. / Pioro, E. / Lipuchin, Y. / Solonin, S. / European Powder Metallurgy Association et al. | 1998
271
Wear Behaviour of a Steam Treated and Impregnated Sintered Material
Borruto, A. / Marani, F. / Bocchini, G. F. / Musella, V. / European Powder Metallurgy Association et al. | 1998
272
Sintering of High Strength Al-Zn-Mg-Cu Alloys to Controlled Dimensions
Danninger, H. / Neubing, H.-C. / Gradl, J. / European Powder Metallurgy Association et al. | 1998
272
Inwardness of the Compact Swelling during Liquid Phase Sintering
Savitskii, A. P. / Romanov, G. N. / Timofeev, N. S. / Martsunova, L. S. / European Powder Metallurgy Association et al. | 1998
274
Production and Applications of Low Cost Titanium Powders
Moxson, V. / Senkov, O. N. / Froes, F. H. / European Powder Metallurgy Association et al. | 1998
278
Review on Computer Simulations of Sintering Processes
Exner, E. / Kraft, T. / European Powder Metallurgy Association et al. | 1998
278
Basic Aspects of the Production of Aluminium Foam by PM and Examples of Applications
Baumgaertner, F. / Cohrt / Brungs, D. / Gers, H. / European Powder Metallurgy Association et al. | 1998
281
Mechanical Alloying as a Processing Route for Nb~3Al - Base Alloys
Dymek, S. / Dollar, M. / Leonard, K. / European Powder Metallurgy Association et al. | 1998
281
Sintering Process of Distaloy SA and Astoloy Mo Modified by Boron
Karwan-Baczewska, J. / Pieczonka, T. / European Powder Metallurgy Association et al. | 1998
284
Wear/Corrosion Behaviour of Reactively Hot Pressed Nickel Aluminides
Stephenson, D. J. / Jin, J. H. / European Powder Metallurgy Association et al. | 1998
284
Application of Pulse Current Pressure Sintering (PCPS) to Al Alloy Powders, its Sintering Mechanism and Application to Sintering of Complex Shaped Parts
Yokota, M. / Nagae, T. / Nose, M. / European Powder Metallurgy Association et al. | 1998
284
Powder Metallurgy Processing and Properties of Al-Mg-Sc Alloys
Kainer, K. U. / Rahmi, U. / European Powder Metallurgy Association et al. | 1998
287
Sintering of Nitrided ASC 100.29 Hoeganaes Grade Powder
Harizanova, S. / Pieczonka, T. / Stoytchev, M. / Roussev, R. / European Powder Metallurgy Association et al. | 1998
287
Mechanical Milling Studies in the Ni-Fe-W System and their Sintering Behaviours in Heavy Alloys
Oezkal, B. / Oevecoglu, L. / European Powder Metallurgy Association et al. | 1998
289
Mechanisms of Sintering in Titanium Alloys produced from Blended Master Alloy Powders
Bolton, J. D. / Becker, B. S. / European Powder Metallurgy Association et al. | 1998
290
Sintering of Different PM Ferrous Materials at Moderate Temperatures
Danninger, H. / Wolfsgruber, E. / Ratzi, R. / European Powder Metallurgy Association et al. | 1998
290
Pseudo-Pitting Process in Powder Metallurgy Materials
Kubicki, B. / Kubicki, M. J. / European Powder Metallurgy Association et al. | 1998
293
Improved Mechanical Alloying Techniques for Oxide Dispersion Strengthened Chromium Base Alloys
Hegels, J. / Koeck, W. / Singer, R. F. / Janousek, M. / European Powder Metallurgy Association et al. | 1998
293
Role of Cu in Fe-Cu-C PM Steel and Replacement of Cu with B
Kuroki, H. / Suzuki, H. Y. / Shinozaki, K. / European Powder Metallurgy Association et al. | 1998
295
Improved High Cycle Fatigue Strength of BE PM Ti-6Al-1.7Fe-0.1Si Alloy and Ti-6Al-1.7Fe-0.1Si/10TiB Particulate Composites
Hagiwara, M. / Kim, S. J. / Emura, S. / Tang, F. / European Powder Metallurgy Association et al. | 1998
296
Simultaneous Sintering and Quenching of T42 HSS Nitrided Compacts in a Vacuum Heat Treatment Furnace
Talacchia, S. / Gimenez, S. / Agirre, I. / Iturriza, I. / European Powder Metallurgy Association et al. | 1998
296
Tribological Behaviour and Characteristics of Sintered Iron Based Composites with Additions of Cu~3P and Ceramic Particles
Peytour-Chansac, C. / European Powder Metallurgy Association et al. | 1998
299
New Technologies used for Cost Reduction of PM Automobile Components
Dovydenkova, A. / Dovydenkov, V. / Voronina, N. / European Powder Metallurgy Association et al. | 1998
299
Evaluation of Raney-Nickel Catalysts Produced by Mechanical Alloying
Zeifert, B. H. / Cabanas-Moreno, J. G. / Reynoso-Palomino, R. / Hernandez-Miguel, J. A. / European Powder Metallurgy Association et al. | 1998
300
New Approach to the Manufacture of Metallic Fibre
Mason, D. / European Powder Metallurgy Association et al. | 1998
301
Application and Processing Related Properties of Forged Hypereutectic Al-Si PM Alloys for Automotive Components
Timmermans, G. / Froyen, L. / Peytour-Chansac, C. / European Powder Metallurgy Association et al. | 1998
302
Sintering Kinetics, Solid State Phase Transformations and Mechanical Properties of a Powder Metal High Speed Steel
Whitaker, I. / Wyndow, R. / Purnell, C. G. / European Powder Metallurgy Association et al. | 1998
304
Influence of the Carbon Fibre Additions into a PM Friction Metalloceramic Composite on its Phisico-Mechanical and Tribological Characteristics
Corban, M. / Novac, C. / Nita, P. / European Powder Metallurgy Association et al. | 1998
305
Ferrous PM Materials in Automotive Applications: Present and Future Potentialities
Kuehn, I. / European Powder Metallurgy Association et al. | 1998
305
Microstructural Evolution of a Nanocrystalline Ti-47.5Al-3Cr Alloy in the Annealing Range 725C-1200C produced by Mechanical Alloying and Hot Isostatic Pressing
Oevecoglu, M. L. / Oleg / Senkov, N. / Srisukhumbowornchai, N. / European Powder Metallurgy Association et al. | 1998
307
Low Cost Alternative to MoS~2 as Solid Lubricant for Bronze Bearing
Murali, K. / Ashok, S. / Krishna, C. / European Powder Metallurgy Association et al. | 1998
307
Development of the Controlled Forged Powder Metallurgical Piston
Koike, T. / Hiroshi, Y. / European Powder Metallurgy Association et al. | 1998
308
Pressureless Net Shape Manufacture of PM Parts
Magalhaes, S. / Nyborg, L. / Lyckfeldt, O. / Carlstroem, E. / European Powder Metallurgy Association et al. | 1998
311
Performance of Ni-Mo Pre-alloyed Powders
Suzuki, H. / Yoshida, M. / Satoh, M. / European Powder Metallurgy Association et al. | 1998
311
Mg-Based Lightweight Alloys prepared by Mechanical Attrition and Consolidation in the Viscous State
Eckert, J. / Schlorke, N. / Schultz, L. / European Powder Metallurgy Association et al. | 1998
312
Layered Niobium and Tantalum Sulphide Carbides (Nb, Ta)~2S~2C - Prospective New Solid Lubricants
Boller, H. O. / European Powder Metallurgy Association et al. | 1998
313
Influence of the Hot Forming on the Properties PM Al-Si Alloy Based Materials
Szczepanik, S. / European Powder Metallurgy Association et al. | 1998
314
Joining of NiAl to Steel by Reactive Sintering
Matsuura, K. / Ohsasa, K. / Seuoka, N. / Kudoh, M. / European Powder Metallurgy Association et al. | 1998
316
Engineering Properties of Fe-MoS~2 Powder Mixtures
Sustarsic, B. / Kosec, L. / European Powder Metallurgy Association et al. | 1998
317
New Way to Consolidate Mechanically Alloyed Aluminium Powder
Herrera, E. J. / Gallardo, J. M. / Rodriguez, J. A. / European Powder Metallurgy Association et al. | 1998
319
Development of Corrosion - Fatigue Resistant Diffusion - Bonded Pump Impellers from Stainless PM Steels
Sonsino, C. M. / Zieschang, R. / Arnhold, V. / Sandritter, H.-H. / European Powder Metallurgy Association et al. | 1998
319
N2/H2 Sintering for PM Parts
Murali, K. / Ashok, S. / European Powder Metallurgy Association et al. | 1998
319
Microstructure and Mechanical Properties of Rapidly Solidified Al-20Si-xFe-3Cu-1Mg (x=0 and 5wt%) Extrudates
Kim, T. S. / Hong, S. J. / Son, H. T. / Kim, W. T. / European Powder Metallurgy Association et al. | 1998
322
Research Regarding the Obtaining of a New Kind of Metallic Matrix Friction Material
Gavriliu, S. / Critescu, E. / Enescu, E. / Soptea, E. / European Powder Metallurgy Association et al. | 1998
323
Internal Oxidation of Solute Elements in Mechanically Alloyed Copper Based Alloys
Kaneko, J. / Sugamata, M. / Aoya, O. / European Powder Metallurgy Association et al. | 1998
324
Microstructure and Mechanical Properties of RS Aluminium Alloys for Application at Elevated Temperatures
Bizjak, M. / Kosec, L. / Sustarsic, B. / European Powder Metallurgy Association et al. | 1998
324
Sintering Atmospheres Influence on the Structure and Mechancial Characteristics of some Cu-based Self Lubricating Alloys
Gheorghe, S. / Sever, S. / European Powder Metallurgy Association et al. | 1998
325
Development and Application of an Optimised Coating on Shock Absorber Components
Acedo, J. / Abad, A. / Romero, A. / Cesaraccio, C. / European Powder Metallurgy Association et al. | 1998
328
Effect of Different Iron Powder on the Friction Properties of Sintered Friction Materials based on Iron
Talijan, N. M. / Trifunovic, D. S. / Trifunovic, D. D. / European Powder Metallurgy Association et al. | 1998
329
Dispersion Hardening of Platinum by Mechanical Alloying
Edtmaier, C. / Zbiral, J. / Schreier, G. / Disam, J. / European Powder Metallurgy Association et al. | 1998
330
Study Concerning the Influence of Aluminium on some Titanium-Based Sintered Compacts
Candea, V. / Popa, C. / Arghir, G. / Rosso, M. / European Powder Metallurgy Association et al. | 1998
330
Computer Simulation of 2-D Microstructures during Liquid Phase Sintering
Nikolic, Z. S. / Ristic, M. M. / European Powder Metallurgy Association et al. | 1998
331
Recyclability and Life Cycle Environmental Loading of PM Products
Halada, K. / Minagawa, K. / Ijima, K. / European Powder Metallurgy Association et al. | 1998
334
Mechanical Alloying of Fe-Based Solid Lubricant Composite Powders
Ernst, D. / Weiss, H. / Reichardt, R. / Zoz, H. / European Powder Metallurgy Association et al. | 1998
335
Nanocrystalline W-Re Solid Solution obtained by Mechanical Alloying and its Sintering Properties
Ivanov, E. / Bryskin, B. / European Powder Metallurgy Association et al. | 1998
335
Correlated Influence of the Parameters Compaction Pressure/Temperature/Time on the Sintering Process of Ti-Base Alloys
Popa, C. / Candea, V. / Smaranda, L. / Popa, A. / European Powder Metallurgy Association et al. | 1998
336
Reactive Sintering of Ni-Al-Mo Compacts from Elemental Powders Mixtures and Mechanical Alloyed Powders
Pieczonka, T. / Gialanella, S. / Molinari, A. / Kazior, J. / European Powder Metallurgy Association et al. | 1998
337
Knowledge Based System Approach for Concurrent Engineering of PM Components
Smith, L. / Midha, P. S. / European Powder Metallurgy Association et al. | 1998
340
LCF of a Particulate Reinforced Titanium Sintered Composite at Various Temperatures
De Iorio, A. / Ianniello, D. / Iannuzzi, R. / Malaspina, G. / European Powder Metallurgy Association et al. | 1998
341
Dispersion Strengthened Copper made by Mechanical Alloying with Ceramic Powders
Vergara, V. / Lopez, M. / Benavente, R. / Camurri, C. / European Powder Metallurgy Association et al. | 1998
342
De-gassing during Sintering of Different Fe and Fe-0.8%C Powder Compacts
Danninger, H. / Gierl, C. / Leitner, G. / Jaenicke-Roessler, K. / European Powder Metallurgy Association et al. | 1998
343
Scatter in Sintered Component Strength Causes, Test Methods and Results
Baum, U. / Hock, S. / European Powder Metallurgy Association et al. | 1998
344
Sinters Assigned for Performance in High-Duty Friction Pairs
Sorochtej, M. / Tabor, A. / European Powder Metallurgy Association et al. | 1998
346
Elevated Temperature Al-Ti-Fe-Cr Alloys produced by Rapid Solidification
Kawamura, Y. / Inoue, A. / European Powder Metallurgy Association et al. | 1998
347
Use of Gas Atomised Powders for obtaining the Amorphous State in the Al-Zr System Alloys in the Course of Mechanical Alloying
Savin, V. V. / Chayka, V. A. / Kostenko, R. V. / European Powder Metallurgy Association et al. | 1998
348
Generalised Thermodynamic Analysis of Technological Atmospheres
Bondarenko, B. I. / European Powder Metallurgy Association et al. | 1998
349
Characterisation of Nickel Bronze Graphite Composites for Friction Applications
Cambronero, L. E. G. / Pous, J. / Vera, B. / Ruiz-Roman, J. M. / European Powder Metallurgy Association et al. | 1998
349
Development of Iron Based PM Synchro Ring
Blanchard, P. / Durand, C. / European Powder Metallurgy Association et al. | 1998
350
Production of Hard Materials with High-Chromium Carbide Matrix by MA Process
Takaki, S. / Kimura, Y. / Kamo, T. / European Powder Metallurgy Association et al. | 1998
352
Porous and Nonporous Titanium for Surgical Implants of Various Applications
Savitch, V. / Ilyuschenko, A. / European Powder Metallurgy Association et al. | 1998
355
Evolution of Crystallite Size in Cu-Cr Powders during Mechanical Alloying and Heat Treatment
De Paul Martinez, V. / Barrientos, J. / Varas, G. / Garin, J. / European Powder Metallurgy Association et al. | 1998
355
Study of Copper Alloy Fine Powder Effect on Steel Surface Subjected to Friction
Frishberg, I. V. / Kishkoparov, N. V. / Zolotukhina, L. V. / Kharlamov, V. V. / European Powder Metallurgy Association et al. | 1998
357
Grain Growth Dependence on the Solid-Liquid Ratio in Liquid Phase Sintering
German, R. M. / Olevsky, E. A. / European Powder Metallurgy Association et al. | 1998
357
Principles of Functionally Graded Materials
Gasik, M. / European Powder Metallurgy Association et al. | 1998
357
Fabrication of Stainless Steel/Permalloy Alloy Composite by PM Process
Okimoto, K. / Izumi, K. / Satoh, T. / Karo, Y. / European Powder Metallurgy Association et al. | 1998
361
Microstructural Evolution of Mg-Based Alloys obtained by Mechanical Alloying
Maris Ordo�ez, S. / Martinez, V. / San Martin U, A. / European Powder Metallurgy Association et al. | 1998
362
Influence of Mean Stress on the Fatigue Behaviour of Sintered Steel
Piotrowski, A. / Biallas, G. / European Powder Metallurgy Association et al. | 1998
363
The Performance of Joints obtained by Diffusion Bonding of PM Bronze to a Steel
Saritas, S. / Kurt, A. / European Powder Metallurgy Association et al. | 1998
363
Sintering Behaviour of Tungsten-Copper in the Building of a Functional Gradient
Birth, U. / Joensson, M. / Kieback, B. / European Powder Metallurgy Association et al. | 1998
364
Rapid Characterisation of Machinability on PM Steel Parts
Romero, A. / Vivancos, J. / Sierra, C. / Prado, J. M. / European Powder Metallurgy Association et al. | 1998
366
Obtaining and Characterisation of Mechanically Alloyed Iron Aluminides
Velasco, F. / Puig, M. / Da Costa, C. E. / Jimenez, A. / European Powder Metallurgy Association et al. | 1998
368
Longitudinal Vibrations Tests Applied to Sintered Parts
Arghir, G. / Arghir, M. / Abrudan, E. / European Powder Metallurgy Association et al. | 1998
369
Structure Formation Peculiarities of Surface Layers of Hot-Deformed Powder Items and the Ways of increasing their Properties
Dorofeyev, V. Y. / Dorofeyev, Y. G. / European Powder Metallurgy Association et al. | 1998
369
Joining of MMCs to Metals
Pietrzak, K. / European Powder Metallurgy Association et al. | 1998
370
Enhancing the Machinability of Powder Forged Components
Gagne, M. / Chagnon, F. / European Powder Metallurgy Association et al. | 1998
372
Experience of Production and use of Precipitation Strengthened Copper-Based Materials made by Mechanical Alloying
Dovydenkov, V. / Shalunov, E. / European Powder Metallurgy Association et al. | 1998
374
Dimensional Control in the Production of Thin-Walled PM Gerotors
Karthikeyan, K. / Srinivasan, S. / European Powder Metallurgy Association et al. | 1998
375
Centrifugal Powder Forming (CPF) - Possibilities and Limits of a Special Powder Forming Process
Joensson, M. / Birth, U. / Kieback, B. / European Powder Metallurgy Association et al. | 1998
376
Heat Balance during Drilling of a Sintered Stainless Steel
Beiss, P. / Jaeger, H.-J. / Kutsch, U. / European Powder Metallurgy Association et al. | 1998
377
Sintering Mechanism and Microstructures of High Speed Steels containing 6-11% Vanadium Sintered in a N~2-7%H~2 Atmosphere
Wright, C. S. / Mascarenhas, J. M. G. / Oliveira, M. M. / European Powder Metallurgy Association et al. | 1998
378
Structure and Properties of Attrition-Milled Aluminium-10% Titanium Powder
Gallardo, J. M. / Rodrigues, J. A. / Herrera, E. J. / European Powder Metallurgy Association et al. | 1998
379
Higher Tolerances by Improved Materials and Processes
Larsson, M. / Rassmus, J. / European Powder Metallurgy Association et al. | 1998
381
New Model to describe the Plasto-Mechanical Behaviour of FGM
Rassbach, S. / Lehnert, W. / European Powder Metallurgy Association et al. | 1998
383
PM Tool Steels for Cold Work Applications
Sandberg, O. / Joenson, L. / European Powder Metallurgy Association et al. | 1998
384
Crystallite Size and Micrograins in Degassed Mechanically Alloyed Aluminium Powder
Herrero, J. L. / Rodriguez, J. A. / Herrera, E. J. / European Powder Metallurgy Association et al. | 1998
384
Machining Sinter Hardenable PM Materials
Chagnon, F. / Gagne, M. / European Powder Metallurgy Association et al. | 1998
385
High Density PM Parts - Detection and Prevention of Microcracks
Krezalek, I. C. / European Powder Metallurgy Association et al. | 1998
387
Dilatometric and Residual Thermal Stress Analysis of Alumina/Sintered Materials Joints
Do Nascimento, R. M. / Justino, J. G. / Klein, A. N. / Martinelli, A. E. / European Powder Metallurgy Association et al. | 1998
389
Creep Resistance of PM High Speed Steel as compared to As-cast and As-forged Grades
Berns, H. / Broeckmann, C. / Hinz, H.-F. / European Powder Metallurgy Association et al. | 1998
390
Cutting Data Recommendations for Turning of Various PM Materials using Different Tool Grade and Geometry Selections
Berg, S. / Thorndenberg, H. / European Powder Metallurgy Association et al. | 1998
390
Relationships between MA Processing Parameters and Structural Characteristics of Al~3Nb Nanocrystalline Powders
Kwang Min Lee / Hae Un Yang / In Shup Ahn / European Powder Metallurgy Association et al. | 1998
391
Segregation in Metal Powder Mixes and How to Counteract it
Lindskog, P. / Arvidsson, J. / Beiss, P. / Braun, V. / European Powder Metallurgy Association et al. | 1998
394
Effect of Mechanical Alloying on Selective Laser Sintering of WC-9Co Hard Metal Powder
Laoui, T. / Froyen, L. / Kruth, J.-P. / European Powder Metallurgy Association et al. | 1998
395
Dimensional Tolerance and Strength of Marquench-Repressed PM Steel
Takatoshi, T. / Shiga, R. / Takeda, Y. / European Powder Metallurgy Association et al. | 1998
396
The Effect of Cyclic Loading on the Residual Stresses of a Shot Peened Powder-Forged Steel
Chernenkoff, R. A. / European Powder Metallurgy Association et al. | 1998
396
Studies Concerning the Elaboration of a Magnetic Materials Type Metallic/Ceramic Composite by Mechanical Alloying
Mangra, M. / Gabriela, S. / European Powder Metallurgy Association et al. | 1998
400
Accuracy of Making Rapid Prototypes in Metal
Nissen, A. / Emilsson, E. / European Powder Metallurgy Association et al. | 1998
401
Corrosion Behaviour of 316L Stainless Steels Sintered to High Density through the Effects of a Phosphide Liquid Phase Sintering Aid
Bolton, J. D. / Preusse, H. / European Powder Metallurgy Association et al. | 1998
402
Fe-TiN Composites prepared by Mechanical Alloying and Spark Plasma Sintering
Herrera-Ramirez, J. M. / Cabanas-Moreno, J. / Tsuchiya, T. / Umemoto, M. / European Powder Metallurgy Association et al. | 1998
403
Corrosion Protection of PM Components by Barrier Metallic Coatings
Rossi, S. / Lorenzo, F. / Flavio, D. / European Powder Metallurgy Association et al. | 1998
404
Use of Organic Binders in Powder Mixes to Improve Dimensional Stability of Sintered Steels
Teixeira de Carvalho, M. A. / Pegorer, R. / Rodrigues, D. / European Powder Metallurgy Association et al. | 1998
407
Selective Laser Sintering: Some Questions of Physics and Technology
Tolochko, N. / Yadroitsev, I. G. / Mozzharov, S. E. / Michailov, V. B. / European Powder Metallurgy Association et al. | 1998
407
Creep, Strength and Corrosion Properties of Ferritic and Austenitic PM Stainless for Exhaust Applications
Segall, A. E. / Shaw, B. A. / Cimino, T. / Haberberger, T. E. / European Powder Metallurgy Association et al. | 1998
408
Structure and Properties of Ag~3Sn Intermetallic Compound prepared by Mechanical Alloying
Dobra, T. / Radu, O. / Brandusan, L. / Bota, D. / European Powder Metallurgy Association et al. | 1998
409
Characterisation of the Inner Volume of PM Parts by Micro Computer Tomography
Pischang, K. / Goebbels, J. / Illerhaus, B. / European Powder Metallurgy Association et al. | 1998
409
Corrosion Performance of 316L Stainless Steels with Diboride Additions
Becker, B. S. / Bolton, J. D. / European Powder Metallurgy Association et al. | 1998
413
Corrosion and Wear Behaviour of AISI 316L Reinforced with AlCr~2 Particulate Composite
Moreira-Lima, W. / Candela, N. / Anton, N. / Da Costa, C. E. / European Powder Metallurgy Association et al. | 1998
414
Preparation and Characterisation of Fe-Ni-P-Si Alloys obtained by Mechanical Alloying
Su�ol, J. J. / Mora, M. T. / Clavaguera, N. / Pradell, T. / European Powder Metallurgy Association et al. | 1998
414
Bimetallic PM Superalloys Disks for the New Generation of Civil Aircraft Engines
Kazberovitch, A. M. / Velikavova, I. S. / Ermanok, M. Z. / Samarov, V. N. / European Powder Metallurgy Association et al. | 1998
415
Boriding of PM Steels - an Alternative to Plasma-Nitriding?
Dollmeier, K. / Buehler, G. / Heine, B. / Hunger, H.-J. / European Powder Metallurgy Association et al. | 1998
419
High Nitrogen Stainless Steel produced by Powder Metallurgy
Rodrigues, D. / Tschiptschin, A. P. / Filho, F. A. / European Powder Metallurgy Association et al. | 1998
419
Advanced Ni~3(Si, Ti) Intermetallic Materials by Mechanical Alloying and Reactive Hot Isostatic Pressing
Van Dyck, S. / Froyen, L. / Delaey, L. / Buekenhout, L. / European Powder Metallurgy Association et al. | 1998
420
Simoloyer(R) CM100s, Semi-Continuously Mechanical Alloying in a Production Scale using Cycle Operation - Part II
Zoz, H. / Ernst, D. / Reichardt, R. / Mizutani, T. / European Powder Metallurgy Association et al. | 1998
421
Application of Ultrasonics to Metal Powder Separation
Usherwood, R. / European Powder Metallurgy Association et al. | 1998
421
Heat Treatment in Automatic Equipment - Comparison between Wrought and PM Steels
Navazio, A. / Bocchini, G. F. / European Powder Metallurgy Association et al. | 1998
425
Thermal Conductivity of Sintered Stainless Steel 316L
Beiss, P. / Kutsch, U. / Jaeger, H.-J. / Schmitz, F. / European Powder Metallurgy Association et al. | 1998
425
Ni-Ti-Shape Memory Alloys by Sintering and Hot Isostatic Pressing of Elemental Powders
Von der Crone, U. / Buchkremer, H. P. / Stoever, D. / European Powder Metallurgy Association et al. | 1998
427
Bulk Calibration Standards by Powder Metallurgy for ICP-AES-Analysis
Edtmaier, C. / Lehmer, P. / Zbiral, J. / Disam, J. / European Powder Metallurgy Association et al. | 1998
430
Effect of Pre-processing on the Performance of Nitrided PM Steels
Orth, P. / Ratzi, R. / European Powder Metallurgy Association et al. | 1998
431
Fabrication of TiNi Shape Memory Alloy by Spark-Plasma Sintering and its Thermo-Mechanical Properties
Kyogoku, H. / Hatakeyama, T. / Yoshida, F. / Komatsu, S. / European Powder Metallurgy Association et al. | 1998
431
New Recommendations for the Particle Size Testing of Powders and the Homogenisation of Powder Mixtures
Domsa, S. / Vida-Simiti, I. / European Powder Metallurgy Association et al. | 1998
432
Copper Matrix Strengthening by Internal Oxidation of Al-Prealloy
Rajkovic, V. / Nenad, I. / Mitkov, M. / European Powder Metallurgy Association et al. | 1998
435
Studies of Infiltration applied to PM Stainless Steel
Rosso, M. / Morandi, O. / European Powder Metallurgy Association et al. | 1998
436
Thermomechanical Treatment with Carbon and Nitrogen applied on PM Materials
Torralba, J. M. / Velasco, F. / Iancau, V. / Nica, D. / European Powder Metallurgy Association et al. | 1998
437
Non-Homogeneous Density Distribution within Pressed Iron Samples
Prokic, S. / Zivanovic, B. / European Powder Metallurgy Association et al. | 1998
437
Shape Forming Sintering of TiAl for Automobile Valve by Plasma Sintering Method
Abe, T. / Hashimoto, H. / Um, T. / Park, Y. H. / European Powder Metallurgy Association et al. | 1998
438
Preparation of Mg~2Co Alloy by Mechanical Alloying. Effect of Partial Replacement of Co by Ni and Fe
Bobet, J.-L. / Pechev, S. / Chevalier, B. / Darriet, B. / European Powder Metallurgy Association et al. | 1998
441
Warm Compaction of Stainless Steel Powders
Bergkvist, A. / European Powder Metallurgy Association et al. | 1998
442
Study on the Phase Composition and Surface Hardness of Ion-Nitrocarburising Layer of Sintered Steel
Yin, H. / Su, X. / Zhao, S. / Zhang, L. / European Powder Metallurgy Association et al. | 1998
443
Methodics to Correct the Data of Mercury Porosimetry
Maziuk, V. V. / Pilinevich, L. P. / Rak, A. L. / European Powder Metallurgy Association et al. | 1998
443
Production of High Performance Static Parts of Aeroengine by the Isoprec Process
Raisson, G. / Cauvin, D. / Garcia, J. C. / Buhle, J. P. / European Powder Metallurgy Association et al. | 1998
444
Iron-Nickel-Copper-Molybdenum Alloy obtained by Mechanical Alloying
Salgado, L. / Filho, F. A. / European Powder Metallurgy Association et al. | 1998
447
Surface Reactions during Vacuum Sintering of 316L Stainless Steel Powder
Terrisse, C. / Nyborg, L. / Bracconi, P. / European Powder Metallurgy Association et al. | 1998
448
Microstructures and Properties of Tape Cast Second Generation Orthorhombic-based Titanium Aluminide Alloys
Smith, P. R. / Rosenberger, A. / Shepard, M. / European Powder Metallurgy Association et al. | 1998
448
Design of Experiment (DOE) Study on Carbonitriding of PM Parts
Murali, K. / Ashok, S. / Chowdhury, K. K. / European Powder Metallurgy Association et al. | 1998
448
Research of Iron Powders Behaviour in Magnetovibrating Layer
Gordin, Y. A. / European Powder Metallurgy Association et al. | 1998
449
Concentration Fluctuation in Mechanically Alloyed Fe-Ni Invar
Ono, F. / Hayashi, K. / Wei, S. / Maeta, H. / European Powder Metallurgy Association et al. | 1998
453
Ultra-Fine Grain Refinement and Mechanical Properties of High Strain PM Processed AISI 316L Stainless Steel
Ameyama, K. / Sudo, J. / Senoh, S. / Okada, O. / European Powder Metallurgy Association et al. | 1998
453
Resonant Separation of Grinding Slimes
Gordin, Y. A. / Vergnigorov, Y. M. / European Powder Metallurgy Association et al. | 1998
454
'Contiblu' - a New Process for Continuous Steam Treatment
Sarnes, F. / Sarnes, R. / Sames, V. / European Powder Metallurgy Association et al. | 1998
454
Improved Biomedical Co-Cr-Mo PM Alloy for Orthopaedic Applications
Duflos, F. / Pierronnet, M. / European Powder Metallurgy Association et al. | 1998
455
Microstructural Characterisation of a WC Powder Alloy Synthesised from Elemental W and C Powders by Mechanical Alloying
Ovecoglu, M. L. / Kara, H. / Oezkal, B. / European Powder Metallurgy Association et al. | 1998
458
Specific Control of Impurity Inclusions in Powder Materials
Burkhanov, G. S. / Kirillova, V. M. / European Powder Metallurgy Association et al. | 1998
459
HSS-Cu Two-Phase Tool Steels Prepared from Cu Coated Steel Powders
Strobl, S. / Danninger, H. / European Powder Metallurgy Association et al. | 1998
461
Discs from Medium Alloyed PM Nickelbase Alloy
Genrikh, G. / Buslavskiy, L. S. / Zinoviev, V. A. / European Powder Metallurgy Association et al. | 1998
461
Mechanical Alloying of Cu-Al-Ni Shape Memory Alloys
San Juan, J. / Rodriguez, P. / Perez-Saez, R. B. / Recarte, V. / European Powder Metallurgy Association et al. | 1998
462
The Research in Cleaning and Degreasing of PM Structural Parts
Guilemany, J. M. / Sole, A. / Martin, A. J. / Bas, J. A. / European Powder Metallurgy Association et al. | 1998
465
Utilisation of Powder Metallurgy for Standards Preparation
Spiridonova, I. / European Powder Metallurgy Association et al. | 1998
465
Microstructural Characteristics of HSS Powders produced by PREP
Karagoez, S. / Yilmaz, M. / European Powder Metallurgy Association et al. | 1998
466
Microstructural Evolution and Tensile Properties of a Powder Metallurgy Gas Atomised TiAl Alloy
Zhang, G. / Davey, S. J. / Blenkinsop, P. A. / Wise, M. L. H. / European Powder Metallurgy Association et al. | 1998
468
Lapping of PM Materials
Barylski, A. / European Powder Metallurgy Association et al. | 1998
468
Porosity of Aluminium Powder Green Compacts
Tolosa, R. A. / Diaz, J. / Parra, H. / European Powder Metallurgy Association et al. | 1998
468
Diamond Tools with Reaction Sintered Ni~3Al Matrix
Hu, S. C. / Hwang, K. S. / European Powder Metallurgy Association et al. | 1998
471
Influence of Sintering Atmosphere on Microstructure and Properties of Sintered Stainless Steels (I)
Iglesias, F. A. C. / Ruiz Roman, J. M. / Garcia Cambronero, L. E. / Ruiz Prieto, J. M. / European Powder Metallurgy Association et al. | 1998
472
Synthesis of Gamma-Titanium Aluminide-Titanium Diboride-Titanium Aluminum Nitride Composition by Mechanical Alloying and Pulse Discharge Sintering
Hashimoto, H. / Abe, T. / Sato, H. / Chauhan, S. / European Powder Metallurgy Association et al. | 1998
474
Influence of Additives in PM Steels on the Quality of Machined Surfaces
Danninger, H. / Liersch, A. / Ratzi, R. / European Powder Metallurgy Association et al. | 1998
474
Comparison of the Formation of FeAl Intermetallic Compound in the Process of Reactive Sintering and of Mechanical Alloying
Hashii, M. / Hosoi, Y. / European Powder Metallurgy Association et al. | 1998
475
Sintering/HIPing of Cobalt Powders for Diamond Tools
Del Villar, M. / Echeberria, J. / Iturriza, I. / Castro, F. / European Powder Metallurgy Association et al. | 1998
477
Influence of Sintering Atmosphere on Microstructure and Properties of Sintered Stainless Steels (II)
Iglesias, F. A. C. / Ruiz Roman, J. M. / Garcia Cambronero, L. E. / Ruiz Prieto, J. M. / European Powder Metallurgy Association et al. | 1998
478
Microstructure Property Relationships in HIPed Stellite Powders
Ashworth, M. / Bryer, J. C. / Jacobs, M. H. / King, S. / European Powder Metallurgy Association et al. | 1998
480
Properties of Nitrocarburised PM Iron and Steels Modified by Boron
Rosso, M. / Karwan-Baczewska, J. / Ubertalli, G. / European Powder Metallurgy Association et al. | 1998
480
Reaction Synthesis of NiAl/50%SiCp Composites
Carvalho, M. H. / Marcelo, T. / European Powder Metallurgy Association et al. | 1998
481
Densification of Diamond Tools with Co, Ni and Fe Based Metallic Binders
Ojeda, R. G. / Del Villar, M. / Muro, P. / Iturriza, I. / European Powder Metallurgy Association et al. | 1998
483
Comparative Study between HIP and Forged 316 LN Stainless Steel: Mechanical Properties and Damage Mechanisms
Couturier, R. / Burlet, H. / Massoud, J. P. / Bienvenu, Y. / European Powder Metallurgy Association et al. | 1998
484
PM Production of a Ni-based Superalloy Y-Precipitation Hardened, using Elemental Powders
Lucaci, M. / Vasile, E. / Vidu, C. D. / Bunescu, M. C. / European Powder Metallurgy Association et al. | 1998
486
Fundamental Aspects of Reactive Synthesis of Al Matrix Composites
Brinkman, H. J. / Duszczyk, J. / Katgerman, L. / European Powder Metallurgy Association et al. | 1998
487
Coated Powder Approach for Tungsten Alloys
Bose, A. / Sherman, A. J. / Biswas, A. / European Powder Metallurgy Association et al. | 1998
489
Intermetallic Formation during Iron-Aluminum Reactive Sintering
Wang, X. Q. / Wood, J. V. / Sui, Y. J. / Haibo, L. / European Powder Metallurgy Association et al. | 1998
489
Wear Behaviour of Heat Treated Sintered Steels
Rosso, M. / Scavino, G. / European Powder Metallurgy Association et al. | 1998
489
Properties of 316L Stainless Steel Sintered under Different Conditions
Gomez, F. / Gallardo, J. M. / Soda, L. / Herrera, E. J. / European Powder Metallurgy Association et al. | 1998
492
Reaction Synthesis of Nb-Ni-Al Alloys
Mendes Leal Neto, R. / Iris Ferreira, P. / European Powder Metallurgy Association et al. | 1998
492
Morphological Effect of Grains on Deformation Mechanism Maps of PM Tungsten Fine Wires
Tanoue, K. / European Powder Metallurgy Association et al. | 1998
495
Effect of Compacting Pressure and Powder Particle on the Corrosion Behaviour of AISI 316L Stainless Steel Filters
Barbosa, L. P. / Costa, I. / Ambrosio Filho, F. / European Powder Metallurgy Association et al. | 1998
495
Blended Elemental Powder Semisolid Forming of Ti-Al Alloys and their Mechanical Properties
Yasue, K. / Yu, G. L. / Wen, C. E. / European Powder Metallurgy Association et al. | 1998
496
Simulation of Boron Powder Densification by Hot Isostatic Pressing
Nicolle, C. / Thiebaut, C. / Mutin, P. / Perriat, P. / European Powder Metallurgy Association et al. | 1998
498
Reactive Synthesis of Porosity Composition Material
Makarov, A. / Antsiferov, V. / European Powder Metallurgy Association et al. | 1998
498
Work Hardening of Powder Sintered Mo-Re Alloys
Garin, J. L. / Mannheim, R. L. / European Powder Metallurgy Association et al. | 1998
501
Characteristics of Four Ti~5Si~3-Base Alloy Compacts Fabricated by Mechanical Alloying and Vacuum Hot Pressing
Isonishi, K. / European Powder Metallurgy Association et al. | 1998
501
Potential of the Phase-Doppler-Anemometry for the Analysis and the Control of Spray Forming Processes
Bauckhage, K. / European Powder Metallurgy Association et al. | 1998
501
Microstructure and Technological Properties of Sintered B and Cu Alloyed AlSl 316L
Kazior, J. / Molinari, A. / Pieczonka, T. / Tiziani, A. / European Powder Metallurgy Association et al. | 1998
502
3D Modelling of Hot Isostatic Pressing for Stainless Steel Powder
Dellis, C. / Bouaziz, O. / Moret, F. / European Powder Metallurgy Association et al. | 1998
504
Bohemian Wolframite and Tungsten Discovery
Dufek, V. / Mitrov, P. / Palme, J. / Sarman, L. / European Powder Metallurgy Association et al. | 1998
507
Corrosion Resistance of a Sintered Austenitic Stainless Steel
Lapusan, S. / Candea, V. / Popa, C. / European Powder Metallurgy Association et al. | 1998
507
Structural Characterisation of WC+12Co/NiCrBSi Free Standing Forms obtained by HVOF Thermal Spray
Guilemany, J. M. / Franch, D. R. / Lorenzana, C. / European Powder Metallurgy Association et al. | 1998
508
Iron-Resin Composite Materials for AC Magnet Applications
Gelinas, C. / Battison, J. M. / European Powder Metallurgy Association et al. | 1998
508
HIP of SY625 Powder
Lasalmonie, D. / Dellis, C. / Garcia, J. C. / Buhle, J. P. / European Powder Metallurgy Association et al. | 1998
509
Sintering of Ternary Mo-W-Re Alloys at Medium Temperatures
Mannheim, R. / Garin, J. L. / European Powder Metallurgy Association et al. | 1998
513
High Velocity Oxy - Fuel Spraying
Koutsky, J. / European Powder Metallurgy Association et al. | 1998
513
Application of Computer Modelling of Phase Equilibrium Diagrato Stainless Steel Alloy Development
Becker, B. / Bolton, J. D. / Preusse, H. / Youseffi, M. / European Powder Metallurgy Association et al. | 1998
514
Influence of Grain Size on the Properties of Soft Magnetic Iron-Resin Composites
Pelletier, S. / Lefebvre, L.-P. / Thomas, Y. / European Powder Metallurgy Association et al. | 1998
514
Development of an Intelligent Control System for a Hot Isostatic Pressing Unit
Rizkalla, C. / Fondere, J. P. / Raynaud, H. F. / Vignes, A. / European Powder Metallurgy Association et al. | 1998
515
Fracture Toughness of Tungsten Heavy Alloys
Ludynski, Z. / Bucki, J. J. / European Powder Metallurgy Association et al. | 1998
519
PM Technology for Tool Steels with Intermetallic Hardening
Karpov, M. I. / Wnukov, V. I. / Medved, N. V. / Danninger, H. / European Powder Metallurgy Association et al. | 1998
519
On the Optimal Velocity and Temperature of Stainless Steel Powder Particles during Plasma Spraying
Sobolev, V. / Guilemany, J. M. / Martin, A. J. / European Powder Metallurgy Association et al. | 1998
520
Microstructural Control of Mechanically Alloyed Tungsten Heavy Alloy by Two Step Sintering
Ryu, H. J. / Hong, S. H. / Baek, W. H. / European Powder Metallurgy Association et al. | 1998
520
Cost Effective HIPing of Steel Powders
Westerlund, J. / Bergman, C. / Zimmerman, F. / European Powder Metallurgy Association et al. | 1998
520
Route from Powder to an Electrical Machine Application
Krogen, O. / Jansson, P. / European Powder Metallurgy Association et al. | 1998
524
Studies of New Applications of Ni-based Powders for Hardfacing Processes
Rosso, M. / Bennani, A. / European Powder Metallurgy Association et al. | 1998
525
Hot Isostatic Pressing of Heat Resistant Steel X10CrAl18
Laptev, A. M. / Buchkremer, H. P. / Melnikov, A. Y. / Stoever, D. / European Powder Metallurgy Association et al. | 1998
525
Heat Treatment Response of Supersolidus Sintered Water-Atomised Fe-2.3C-6.8Mo-69W-4.0Cr-6.2V-10.8Co High Speed Steel
Cias, A. / Konstanty, J. / Pieczonka, T. / Wronski, A. S. / European Powder Metallurgy Association et al. | 1998
526
Low-Temperature Oxidation of Industrial Molybdenum Surfaces
Schintlmeister, A. / Martinez, H. P. / Wilhartitz, P. / Netzer, F. P. / European Powder Metallurgy Association et al. | 1998
526
Anode Reactor Powder Cores for HVDC (500kVA) Transmission System
Ishihara, C. / Asaka, K. / Baba, N. / Saitou, S. / European Powder Metallurgy Association et al. | 1998
531
Optimisation of Hot Isostatic Pressing by using a Numerical Simulation
Sanchez, L. / Ouedraogo, F. / Stutz, P. / Dellis, C. / European Powder Metallurgy Association et al. | 1998
531
Plasma Sprayed Tungsten Carbide Coatings after Laser Surface Treatment
Mateos, J. / Cuentos, J. M. / Fernandez, E. / Cadenas, M. / European Powder Metallurgy Association et al. | 1998
532
Research into Tungsten Powder Processing
Pascu, I. / Tarata, D. / European Powder Metallurgy Association et al. | 1998
532
Magnetic-Conductive PM Composites for Electrical Hysteresis Motor
Weglinski, B. / Kordecki, A. / European Powder Metallurgy Association et al. | 1998
533
Effect of Powder Processing Technique on Structure and Properties of Silver-Tin Oxide Electrical Contact Material
Joshi, P. B. / Patel, M. R. H. / Gadgeel, V. L. / Kaushik, V. K. / European Powder Metallurgy Association et al. | 1998
537
Characterisation of the Spray Cone of a Free Fall Atomiser and its Influence on the Spray Forming Process
Uhlenwinkel, V. / Buchholz, M. / Kramer, C. / Bauckhage, K. / European Powder Metallurgy Association et al. | 1998
537
Tantalum Silicide Sputtering Target Material for Amorphous Ta-Si-N Layers
Ivanov, E. / European Powder Metallurgy Association et al. | 1998
537
Thermal Expansion Behaviour of Corrosion Resistant Iron-based PM Materials
Buchkremer, H. P. / Crone, U. / Koppitz, T. / Laptev, A. M. / European Powder Metallurgy Association et al. | 1998
538
Magnetic Cosserat Continuum Theory to Simulate Behaviour of Magnetic Powder during Compaction in Applied Magnetic-Field
Kotera, H. / Sawada, M. / Shima, S. / European Powder Metallurgy Association et al. | 1998
539
Electrical Conductivity of Cu~2O-Based Cermets
Ivanov, V. V. / Polyakov, P. V. / Blinov, V. A. / Van-Zhu, S. / European Powder Metallurgy Association et al. | 1998
542
Phenomenological Model of Densification Kinetics
Matveyenkov, A. P. / Ponomaryev, Y. I. / Golub, M. / Frolov, V. I. / European Powder Metallurgy Association et al. | 1998
543
Microstructure and Properties of High Strength and High Conductivity Cu-Cr-Zr-Mg Alloy prepared by Spray Forming
Shen, J. / Li, Z. / Cao, F. / Li, Q. / European Powder Metallurgy Association et al. | 1998
544
Influence of Added Elements in Fe and Fe-3Si Soft Magnetic Materials
Clavaguera-Mora, M. T. / Clavaguera, N. / Vazquez, M. / Bas, J. A. / European Powder Metallurgy Association et al. | 1998
544
New Developments of Powder Metallurgy Research Institute in the Field of Composite Materials, Products, Coatings and Production Technologies
Kletsko, G. / Vityaz, P. A. / Zvonarev, E. V. / European Powder Metallurgy Association et al. | 1998
545
Oxidation Kinetics of Copper-Diamond Compositions in Air
Ivanov, V. V. / Van-Zhu, S. / European Powder Metallurgy Association et al. | 1998
545
Study of the Interface Metallic Composites obtained by Welding Diffusion (Hot Isostatic Pressing)
Hugot, F. / Raisson, G. / European Powder Metallurgy Association et al. | 1998
548
Effect of the Physical Characteristics and Properties of Powder Particles on the Structural and Mechanical Characterisation of Cr~3C~2-NiCr Coatings obtained by HVOF
Guilemany, J. M. / Calero, J. A. / Sobolev, V. V. / European Powder Metallurgy Association et al. | 1998
549
Effects of Spray Deposition on the Microstructures and Properties of Al-Li Alloy
Cui, C. / Cao, F. / Li, Q. / European Powder Metallurgy Association et al. | 1998
550
Properties of Magnetic-Conductive PM Composites
Janta, T. / Weglinski, B. / European Powder Metallurgy Association et al. | 1998
551
Research about some Sintered Parts of Cu-Wc System
Tarata, D. / Pascu, I. / European Powder Metallurgy Association et al. | 1998
552
Elastic Properties of Sintered Iron and Steel
Beiss, P. / Sander, C. / European Powder Metallurgy Association et al. | 1998
554
Production of Coatings containing selected Diamond, Nitrides and Carbides by APS and UPS Processes
Ilyuschenko, A. / European Powder Metallurgy Association et al. | 1998
555
Numerical Simulation of Heat and Momentum Transfer in Spray Forming Process
Cui, C. / Li, Z. / Li, Q. / European Powder Metallurgy Association et al. | 1998
555
Manufacture of Oxide-Dispersion-Strengthened Silver by Mechanical Alloying
Grundmann, U. / Heilmaier, M. / Schultz, L. / European Powder Metallurgy Association et al. | 1998
556
Action upon the Properties of Powdered Magnetic Materials by Means of the Detonation Effect of Gas Mixtures
Potapenko, A. / Letyuk, L. M. / Semernin, A. N. / Rakov, I. V. / European Powder Metallurgy Association et al. | 1998
560
Investigation of the Boron and Carbon Additions influenced in the Milling Process on the Properties of the Nd-Fe-Ti-B Magnets
Lukin, A. A. / Golub, M. A. / Matveenko, A. P. / Juravlev, A. A. / European Powder Metallurgy Association et al. | 1998
560
Production of Productive Coatings and Discrete Structure
Ivashko, V. / Ilyuschenko, A. F. / Doroshkevich, E. A. / Okovity, V. A. / European Powder Metallurgy Association et al. | 1998
561
Study by Physical-Mathematical Methods of AgNi Powders used for Electrical Contacts
Pogrion, N. P. / Tirnovan, M. / Panaite, V. / Nisipeanu, B. / European Powder Metallurgy Association et al. | 1998
561
A Novel High Strength and Heat Resistant Aluminium Alloy produced by Spray Forming
Shen, J. / Fan, H. / Cao, F. / Li, Q. / European Powder Metallurgy Association et al. | 1998
562
Elastic Behaviour and First Yielding in PM Steels
Straffelini, G. / Fontanari, V. / Brandusan, L. / Molinari, A. / European Powder Metallurgy Association et al. | 1998
565
Thermal and Mechanical Treatment of Self-Fluxing Alloys
Ilyuschenko, A. / Doroshkevich, E. A. / Ivashko, V. A. / Shevtsov, A. I. / European Powder Metallurgy Association et al. | 1998
566
Influence of Sintering Regime on the Oxidation of Surface Layer of Sintered SmCo~5 Magnets
Talijan, N. / Milutinovic-Nikolic, A. / Stajic-Trosic, J. / European Powder Metallurgy Association et al. | 1998
566
Microstructural Effects on the Dynamic Behaviour of High Density Sintered Steels
Mars, O. / European Powder Metallurgy Association et al. | 1998
567
Metal Nanopowders for Polymer Matrix Composites
Guenther, B. / Schaefer, H. / European Powder Metallurgy Association et al. | 1998
567
Structural Investigations of the Alumina-Zirconium Silicate Powders
Timovan, M. / Popescu-Pogrion, N. / Matulescu, D. / European Powder Metallurgy Association et al. | 1998
570
Thermal Coatings from New Iron-Base Alloys
Revun, S. A. / Muraviova, E. L. / European Powder Metallurgy Association et al. | 1998
571
Mechanical Properties of Dielectromagnets prepared by Injection Moulding
Slusarek, B. / Bialo, D. / Kulesza, T. / Gromek, J. Z. / European Powder Metallurgy Association et al. | 1998
572
Influence of Carbonyl Iron Powder on the Mechanical Properties of Fe 1.5%Mo+0.5%C in the As-Sintered and Heat Treated States
Neubauer, A. / Lang, K.-H. / Voehringer, O. / Loehe, D. / European Powder Metallurgy Association et al. | 1998
572
Interaction between Components under Thermal Spraying Fusion and Welding of Composite Coatings
Muraviova, E. L. / Revun, S. / European Powder Metallurgy Association et al. | 1998
573
Micro-Composite Tungsten-Copper Contact Materials
Wojtasik, K. / Stolarz, S. / European Powder Metallurgy Association et al. | 1998
573
Ultra Grain Refining of Iron by Mechanical Milling Process
Kimura, Y. / Takaki, S. / European Powder Metallurgy Association et al. | 1998
576
Magnetic Properties of Dust Cores made from Iron Powder with Insulating Inorganic Compound Coating
Hiroyuki, M. / Yaguchi, H. / Seki, Y. / European Powder Metallurgy Association et al. | 1998
577
Formation of Thin-Film Tribological Coatings by Electro-Contact Sintering of Powder Composites
Kovtun, V. A. / Pleskachevsky, Y. M. / European Powder Metallurgy Association et al. | 1998
578
Behaviour of Sintered Iron and Steels at Impact Bending Tests
Koch, H. P. / Knebel, R. / Neubauer, A. / Voehringer, O. / European Powder Metallurgy Association et al. | 1998
579
Grain Growth and Densification of the Nanocrystalline W-Cu Powder prepared by Mechanical Alloying
Young Do Kim / Kim, J. C. / Ryu, S. S. / Moon, I. H. / European Powder Metallurgy Association et al. | 1998
579
Modelling and Optimisation of the Production Process of Copper-Graphite Materials
Jolovic, L. / Petronijevic, D. / Drndarevic, D. / European Powder Metallurgy Association et al. | 1998
581
Particle Alignment Simulation using Cosserat Continuum Theory
Kotera, H. / Sawada, M. / Shima, S. / European Powder Metallurgy Association et al. | 1998
583
Effect of Technological Parameters of Laser Fusion and Chemical Composition on Structure and Properties of Ni-Cr-B-Si-C Powder Coatings
Kardapolova, M. / Devoino, O. / Spiridonov, N. / European Powder Metallurgy Association et al. | 1998
584
Mechanical Properties of Boron Alloyed Astaloy Mo Alloys
Molinari, A. / Straffelini, G. / Szewczyk, A. / Tabor, A. / European Powder Metallurgy Association et al. | 1998
585
Computer Simulation of Intercalation Processes in Application to Nanotechnology of Layered Materials
Efimova, K. / Kartuzov, V. V. / Krasikov, I. V. / Kulikov, L. M. / European Powder Metallurgy Association et al. | 1998
585
Project for Testing Structural Powder Brushes
Beck, J. C. P. / European Powder Metallurgy Association et al. | 1998
586
Influence of some Technological Parameters on Physical Characteristics of Fe-50%Ni Sintered Material
Llungu-Dodu, P. / Miron, P. / Pantiru, N. C. / Octavian, F. / European Powder Metallurgy Association et al. | 1998
587
Improvement of Antifriction Properties of Bronze Powder Coatings by Chemical and Thermal Treatment
Devoino, O. / Kardapolova, M. / Panich, G. / Rak, A. / European Powder Metallurgy Association et al. | 1998
590
Nitrogenation of NdFe~1~1 and NdFe~1~0~.~7~5Mo~1~.~2~5 Alloys via Chemical Reaction with Sodium Azide (NaN~3)
Guilherme, E. G. / Rechenberg, H. R. / European Powder Metallurgy Association et al. | 1998
590
Deformation-Induced Volume Changes in Sintered Ferrous Materials
Voehringer, O. / Palma, E. S. / Macheraud, E. / European Powder Metallurgy Association et al. | 1998
591
Consolidation of Nanocrystalline Alumina
Pruemmer, R. / Weimar, P. / European Powder Metallurgy Association et al. | 1998
591
Wear Resistant and Graded Powder Coatings produced by Vacuum Electron-Beam Facing
Pribitkov, G. / Panin, V. / Beljuk, S. / Durakov, V. / European Powder Metallurgy Association et al. | 1998
591
Influence of Additives on the Behaviour of Copper Sintered Collectors for DC Automotive Engines
Pantiru, N. C. / Cristescu, E. / Al Cornea, S. / Jelescu, C. / European Powder Metallurgy Association et al. | 1998
595
Fine Grain W-Cu and Fe-Cu Pseudoalloys with Stable Structure
Panichkina, V. V. / Filippov, N. I. / European Powder Metallurgy Association et al. | 1998
596
Modern Pre-alloyed PM Steels and Advanced Process Technology
Link, R. / European Powder Metallurgy Association et al. | 1998
596
Formation of Coating at the Plasma Alloying
Spiridonova, I. / Svetlana, T. / European Powder Metallurgy Association et al. | 1998
596
Effects of Addition of Third Alloying Elements on the Formation of Cu-C Nanocomposite Powder Particles
Lee, K. M. / Kim, H. S. / European Powder Metallurgy Association et al. | 1998
596
Influence of Sintering Environment on Structure and Physico-Mechanical Properties of Soft Magnetic Powder Materials of System Fe-P
Dorogina, G. A. / Selmenskih, N. I. / European Powder Metallurgy Association et al. | 1998

Wie erhalte ich diesen Titel?

Exportieren, teilen und zitieren

Feedback