Melden Sie sich zuerst an, um alle Funktionen optimal nutzen zu können!

    Heat and quench propagation in HTSC coils with bobbins from different materials (part 2, results and their discussion) (Englisch)

    In: International cryogenic engineering conference ; 357-360  ; 1998
    • ISBN:
      0750305975
    • Aufsatz (Konferenz)  /  Print

    Wie erhalte ich diesen Titel?

    Exportieren, teilen und zitieren

    © Metadata Copyright the British Library Board and other contributors. All rights reserved.

    Inhaltsverzeichnis Konferenzband

    Die Inhaltsverzeichnisse werden automatisch erzeugt und basieren auf den im Index des TIB-Portals verfügbaren Einzelnachweisen der enthaltenen Beiträge. Die Anzeige der Inhaltsverzeichnisse kann daher unvollständig oder lückenhaft sein.

    1
    Kleemenko cycle coolers: low-cost refrigeration at cryogenic temperatures
    Little, W. A. / International Cryogenic Engineering Committee et al. | 1998
    11
    Classification of pulse tube cryocoolers
    Matsubara, Y. / International Cryogenic Engineering Committee et al. | 1998
    17
    Cryogenic refrigeration below 70 K
    Beduz, C. / Scurlock, R. G. / International Cryogenic Engineering Committee et al. | 1998
    23
    Applications of bulk high temperature superconductors
    Murakami, M. / Yoo, S. I. / Sakai, N. / Seo, S. J. / International Cryogenic Engineering Committee et al. | 1998
    29
    High-temperature superconductivity in power engineering
    Grant, P. / International Cryogenic Engineering Committee et al. | 1998
    31
    MRI magnets-market, applications and technologies
    Hawksworth, D. / International Cryogenic Engineering Committee et al. | 1998
    33
    Developments in cryogenic air separation technology
    Thorogood, R. M. / International Cryogenic Engineering Committee et al. | 1998
    35
    The first collection of liquid hydrogen-James Dewar, 1898
    Hands, B. A. / International Cryogenic Engineering Committee et al. | 1998
    39
    The commercial use of liquid hydrogen over the last 40 years
    Kinard, G. E. / International Cryogenic Engineering Committee et al. | 1998
    45
    LH~2-technology for vehicles
    Reese, W.-H. / Ruediger, H. / Wolf, J. / International Cryogenic Engineering Committee et al. | 1998
    47
    The thermophysical properties of cryogenic fluids, then and now
    Arp, V. D. / McCarty, R. D. / International Cryogenic Engineering Committee et al. | 1998
    57
    Review on the construction and commissioning of superconducting magnet system for Large Helical Device
    Motojima, O. / Satoh, S. / Mito, T. / Maekawa, R. / International Cryogenic Engineering Committee et al. | 1998
    69
    Use of a two-stage pulse tube refrigerator for cryogen-free operation of a superconducting niobium-tin magnet
    Wang, C. / Thummes, G. / Best, K.-J. / Oswald, B. / International Cryogenic Engineering Committee et al. | 1998
    73
    Visualization study on flow behaviour and work of working gas in a pulse tube refrigerator
    Shiraishi, M. / Nakamura, N. / Takamatsu, K. / Murakami, M. / International Cryogenic Engineering Committee et al. | 1998
    77
    Pulse tube coolers for the NASA AIRS flight instrument
    Chan, C. K. / Raab, J. / Colbert, R. / Carlson, C. / International Cryogenic Engineering Committee et al. | 1998
    89
    Comparison studies of thermodynamic losses in pulse tube cooler components
    Rohlin, L. / Ravikumar, K. V. / Yoshida, S. / Frederking, T. H. K. / International Cryogenic Engineering Committee et al. | 1998
    93
    Investigation of the phase shift of the oscillating flow regenerator for a pulse tube cooler with high frequency
    Ju, Y. / Zhou, Y. / Jiang, Y. / He, G. / International Cryogenic Engineering Committee et al. | 1998
    97
    Use of polymer materials for the regenerator of a pulse tube refrigerator
    Gerster, J. / Krause, J. / Thuerk, M. / Seidel, P. / International Cryogenic Engineering Committee et al. | 1998
    101
    Refrigeration at 1.8 K by using a combination of warm screw compressors and cold two-stage turbo-compressors
    Adler, E. / Chromec, B. / Loehlein, K. / Purtschert, W. / International Cryogenic Engineering Committee et al. | 1998
    109
    A 4.2 K G-M refrigerator with a new configuration
    Zhang, L. / Xu, X. D. / Liu, L. Q. / International Cryogenic Engineering Committee et al. | 1998
    113
    The experimental study of using plate-foil journal bearings for a high speed cryogenic turboexpander
    Hou, Y. / Chen, C. Z. / Xiong, L. Y. / Wang, J. / International Cryogenic Engineering Committee et al. | 1998
    117
    Discussion of regenerator performance improvement with a binary gas mixture
    Yu, J. / Chen, G. / Gan, Z. / Jin, T. / International Cryogenic Engineering Committee et al. | 1998
    123
    Development of a microminiature sorption cooler
    Burger, J. F. / Holland, H. J. / Van der Wekken, M. C. / Ter Brake, H. J. M. / International Cryogenic Engineering Committee et al. | 1998
    127
    Vibration reduction in balanced linear compressors
    Dadd, M. W. / Davey, G. / Lion Stoppato, P. F. / Bailey, P. B. / International Cryogenic Engineering Committee et al. | 1998
    133
    Vortex-throttle Joule-Thomson cryocooler
    Maytal, B.-Z. / International Cryogenic Engineering Committee et al. | 1998
    137
    Design, development and experimental investigations of a two-stage Stirling cycle cryogenerator
    Natu, P. V. / Narayankhedkar, K. G. / International Cryogenic Engineering Committee et al. | 1998
    141
    Theoretical analysis of the working parameters of a semiconductor cooler with an `infinite cascade'
    Xuan, X. / Wang, W. / Dong, D. / International Cryogenic Engineering Committee et al. | 1998
    145
    Performance assessment of industrial prototype cryogenic helium compressors for the Large Hadron Collider
    Bezaguet, A. / Lebrun, P. / Tavian, L. / International Cryogenic Engineering Committee et al. | 1998
    149
    Reconfiguration of AB and W/SSC/Linde liquefier to meet SLAC-BaBar detector magnet requirements
    Burgess, W. / Craddock, W. C. / Kurtcuoglu, K. / Quack, H. / International Cryogenic Engineering Committee et al. | 1998
    157
    Regenerator dynamics in the harmonic approximation
    De Waele, A. T. A. M. / Hooijkaas, H. W. G. / Steijaert, P. P. / Benschop, A. A. J. / International Cryogenic Engineering Committee et al. | 1998
    161
    Development of JT precooled dilution refrigerators and refrigerant-free dilution refrigerators
    Kubota, M. / Igarashi, T. / Fukuda, M. / Kovacik, V. / International Cryogenic Engineering Committee et al. | 1998
    165
    Forced flow cooling at liquid helium temperature; a study on refrigerator process arrangements
    Kuendig, A. / International Cryogenic Engineering Committee et al. | 1998
    173
    New concepts for tropical cryogenic ambient air vaporizers
    Bernert, R. E. / International Cryogenic Engineering Committee et al. | 1998
    181
    Cryogenic R&D at the CERN central cryogenic laboratory
    Blin, M. / Ferlin, G. / Gauss, P. / Policella, C. / International Cryogenic Engineering Committee et al. | 1998
    185
    A microcryostat for refrigeration at 1.8 K
    Bouyaya, A. / Policella, C. / Rieubland, J.-M. / Vandoni, G. / International Cryogenic Engineering Committee et al. | 1998
    189
    Cryogenic system for the test facilities of the ATLAS liquid argon calorimeter modules
    Bremer, J. / Cambon, A. / Chalifour, M. / Haug, F. / International Cryogenic Engineering Committee et al. | 1998
    193
    The study of a small air refrigerator with a plate-foil aerodynamic bearings turboexpander
    Chen, C. Z. / Wu, G. / Xiong, L. Y. / Hou, Y. / International Cryogenic Engineering Committee et al. | 1998
    197
    Study of two-component gas mixture in regenerative refrigerators
    Chen, G. B. / Gan, Z. H. / Yu, J. P. / Jin, T. / International Cryogenic Engineering Committee et al. | 1998
    201
    Cryogenic optical loading of a radiant cooler
    Dong, D. / Wang, W. / International Cryogenic Engineering Committee et al. | 1998
    205
    Thermal performance of insulating cryogenic pin spacers
    Darve, C. / Vandoni, G. / International Cryogenic Engineering Committee et al. | 1998
    209
    Backstreaming of impurity gas through a leak in a pressurized vessel
    Dauvergne, J.-P. / Vandoni, G. / International Cryogenic Engineering Committee et al. | 1998
    213
    Air Force Research Laboratory cryocooler technology development
    Davis, T. M. / Tomlinson, B. J. / International Cryogenic Engineering Committee et al. | 1998
    217
    JT precooled dilution refrigerator performance and highly sensitive torsional oscillator experiments under continuous rotation up to 60 rpm
    Fukuda, M. / Kovacik, V. / Igarashi, T. / Kubota, M. / International Cryogenic Engineering Committee et al. | 1998
    221
    Control-and instrumentation-system for the JET cryosystem
    Garbil, R. / Barth, K. / Konarski, A. / Harling, J. / International Cryogenic Engineering Committee et al. | 1998
    227
    Study of the regenerator temperature gradient in a pulse tube refrigerator
    Halouane, A. / Marechal, J.-C. / Simon, Y. / David, M. / International Cryogenic Engineering Committee et al. | 1998
    237
    Development and test of a new Stirling cryocooler for 15 W at 80 K
    Hempel, O. / Tzscheutschler, A. / Binneberg, A. / Herzog, R. / International Cryogenic Engineering Committee et al. | 1998
    241
    Cooling of the liquid helium container by a pulse tube refrigerator
    Ikeda, H. / Kawano, S. / Inoue, T. / Koyano, T. / International Cryogenic Engineering Committee et al. | 1998
    245
    A proposed upgrade of the liquid hydrogen moderator at Brookhaven's high flux beam reactor
    Jia, L. X. / Passell, L. / Rorer, D. C. / International Cryogenic Engineering Committee et al. | 1998
    251
    Optimization and experiment of a Vuilleumier refrigerator
    Wu, J.-F. / Zhou, Y. / International Cryogenic Engineering Committee et al. | 1998
    255
    Development of a 1 kg/s scale supercritical helium pump
    Kawano, K. / Kato, T. / Shimba, T. / Hamada, K. / International Cryogenic Engineering Committee et al. | 1998
    259
    Etched plate regenerator for a small cryocooler
    Kohara, K. / Torii, A. / Ito, S. / International Cryogenic Engineering Committee et al. | 1998
    263
    Development of a liquid He-free dilution refrigerator for neutron scattering
    Koike, Y. / Morii, Y. / Igarashi, T. / Kubota, M. / International Cryogenic Engineering Committee et al. | 1998
    267
    A numerical model of a miniature multi-bypass pulse tube cooler
    Ju, Y. / Zhou, Y. / Zhu, W. / International Cryogenic Engineering Committee et al. | 1998
    271
    Development of a new type of bearing with tangential supply holes for cryogenic turboexpanders
    Liu, L. / Chen, C. / Zhang, L. / International Cryogenic Engineering Committee et al. | 1998
    275
    The experimental research on the performance of a small oxygen concentrator by using pressure swing adsorption
    Chen, L. / Feng, J. / Zhang, Y. / Wu, Y. / International Cryogenic Engineering Committee et al. | 1998
    279
    Characteristics of AC surface spark voltage of pipes composed with high-strength polyethylene-fibre-reinforced plastics in coolant
    Nitta, T. / Chiba, M. / Kashima, T. / International Cryogenic Engineering Committee et al. | 1998
    283
    Dynamic simulation of the helium refrigerator for the LHD
    Nobutoki, M. / Matsuda, H. / Fukano, T. / Maekawa, R. / International Cryogenic Engineering Committee et al. | 1998
    287
    Large magneto caloric effect in (Dy~xGd~1~-~x)Ga~5O~1~2 for magnetic refrigeration below 1 K
    Numazawa, T. / Sato, A. / International Cryogenic Engineering Committee et al. | 1998
    291
    New regenerator design for cryocoolers
    Ruehlich, I. / Quack, H. / International Cryogenic Engineering Committee et al. | 1998
    295
    A 1 kPa centrifugal cold compressor for the 1.8 K helium refrigeration system
    Saji, N. / Asakura, H. / Yoshinaga, S. / Itoh, K. / International Cryogenic Engineering Committee et al. | 1998
    299
    Influence of surface roughness and precooling by liquid nitrogen on frictional coefficients at liquid helium temperature
    Takao, T. / Yoshino, D. / Kubosaka, T. / Momma, N. / International Cryogenic Engineering Committee et al. | 1998
    303
    Investigation of displacement and phase shift of the gas piston in a pulse tube refrigerator with a neck tube
    Takizawa, K. / Yatsuzuka, S. / Hagiwara, Y. / Torii, A. / International Cryogenic Engineering Committee et al. | 1998
    307
    Variations of compact dilution refrigerators
    Umeno, T. / Yoshida, S. / Kamioka, Y. / International Cryogenic Engineering Committee et al. | 1998
    311
    Experimental study on the new aerostatic gas bearing with tangential supply holes for turboexpanders
    Wang, B. C. / Hou, Y. / Liu, L. Q. / Xiong, L. Y. / International Cryogenic Engineering Committee et al. | 1998
    315
    Performance analysis of the low temperature regenerator with multi-layered hybrid materials
    Wang, L. / Fang, L. / Zhang, L. / International Cryogenic Engineering Committee et al. | 1998
    319
    A new gas foil bearing for cryogenic turboexpanders
    Xiong, L. Y. / Hou, Y. / Wang, J. / Lin, M. F. / International Cryogenic Engineering Committee et al. | 1998
    323
    R&D of a highly reliable refrigeration system for superconducting generators
    Yamada, K. / Shibuya, M. / Takahashi, R. / Ikeuchi, M. / International Cryogenic Engineering Committee et al. | 1998
    327
    Design and calculation of the suspension support system of a radiant cooler for space applications
    Li, Z. / Wang, W. / Quan, H. / International Cryogenic Engineering Committee et al. | 1998
    333
    Power applications of HTS materials-the Southampton perspective
    Sykulski, J. K. / Stoll, R. L. / Goddard, K. / Beduz, C. / International Cryogenic Engineering Committee et al. | 1998
    337
    Neon refrigeration for high temperature superconducting power transmission cables
    Anghel, A. / Pasztor, G. / Wesche, R. / Jakob, B. / International Cryogenic Engineering Committee et al. | 1998
    341
    Construction and tests of a high-T~c SQUID-based heart scanner cooled by small Stirling cryocoolers
    Ter Brake, H. J. M. / Blom, C. J. H. A. / Holland, H. J. / Rijpma, A. P. / International Cryogenic Engineering Committee et al. | 1998
    345
    Cryogenic design and technological development for conduction cooled HTS coils
    Petrillo, E. / Matrone, A. / Pica, G. / International Cryogenic Engineering Committee et al. | 1998
    349
    Fabrication and test of a superconducting coreless three-phase transformer
    Ishigohka, T. / Sekine, S. / Fujimura, T. / Ninomiya, A. / International Cryogenic Engineering Committee et al. | 1998
    353
    Magnetic behaviour of a magnetic shielding system composed of BPSCCO and ferromagnetic cylinders: influence of the air gap between the BPSCCO and soft-iron cylinders
    Mori, K. / Itoh, M. / Minemoto, T. / International Cryogenic Engineering Committee et al. | 1998
    357
    Heat and quench propagation in HTSC coils with bobbins from different materials (part 2, results and their discussion)
    Vysotsky, V. S. / Kiss, T. / Ilyin, Y. A. / Takeo, M. / International Cryogenic Engineering Committee et al. | 1998
    361
    Two-fluid analysis of the thermal-hydraulic stability of ITER CS and TF superconductors
    Zanino, R. / Marinucci, C. / Savoldi, L. / International Cryogenic Engineering Committee et al. | 1998
    365
    Experimental and analytical estimation for transient stability in AC multi-strand superconducting cables
    Ishivama, A. / Sasaki, M. / Susa, T. / Noguchi, S. / International Cryogenic Engineering Committee et al. | 1998
    369
    Thermal stability of large Al-stabilized superconducting magnets. Theoretical analysis of CMS solenoid
    Juster, F.-P. / Fabbricatore, P. / International Cryogenic Engineering Committee et al. | 1998
    375
    Conductor pitch effect on an eddy current loss of the superconducting power cable using the disassembled cable `M' data
    Hoshino, T. / Shibayamai, M. / Itoh, S. / Muta, I. / International Cryogenic Engineering Committee et al. | 1998
    379
    Alternators which use HTSC wire coils and bulk YBCO materials
    Kovalev, L. K. / Ilyushin, K. V. / Larionoff, A. E. / Kovalev, K. L. / International Cryogenic Engineering Committee et al. | 1998
    383
    The investigation of a vertical rotational structure with hybrid superconducting magnetic bearings
    Ye, H. / Xia, P. C. / Lin, L. Z. / International Cryogenic Engineering Committee et al. | 1998
    387
    Shielded-core fault current limiters with a smooth HTS transition
    Gerhold, J. / International Cryogenic Engineering Committee et al. | 1998
    391
    Test of a DC reactor type fault current limiter using a high temperature superconducting coil
    Yamaguchi, M. / Fukui, S. / Satoh, T. / Kaburaki, Y. / International Cryogenic Engineering Committee et al. | 1998
    395
    Resistive current limiting characteristics in a magnetic shield type superconducting fault current limiter
    Onishi, T. / Matsui, A. / Nii, A. / International Cryogenic Engineering Committee et al. | 1998
    399
    Some recent developments in low temperature superconductors for fusion, high energy physics and other applications
    Gregory, E. / Pyon, T. / International Cryogenic Engineering Committee et al. | 1998
    403
    New high-field Nb~3Sn superconductors prepared from intermediate compound powders
    Tachikawa, K. / Ueda, M. / Yamamoto, S. / Yokoyama, T. / International Cryogenic Engineering Committee et al. | 1998
    407
    Effect of Ge addition on microstructure and critical current density of internal tin processed Nb~3Sn strands
    Oh, S.-S. / Ha, D.-W. / Ha, H.-S. / Kim, S. C. K. / International Cryogenic Engineering Committee et al. | 1998
    411
    YBCO superconducting tapes by magnetron IBAD
    Savvides, N. / Gnanarajan, S. / Katsaros, A. / International Cryogenic Engineering Committee et al. | 1998
    415
    Fabrication of Bi~2Sr~2CaCu~2O~x/Ag tapes with J~c (4.2 K, 10 T) > 300 000 A/cm^2 by using the PAIR process
    Kitaguchi, H. / Miao, H. / Kumakura, H. / Togano, K. / International Cryogenic Engineering Committee et al. | 1998
    419
    Bi(2223) Ag sheathed tape characterization under a DC applied magnetic field
    Dutoit, B. / Sjoestroem, M. / Stavrev, S. / International Cryogenic Engineering Committee et al. | 1998
    423
    A scanning SQUID microscopy of superconducting thin film samples
    Gudoshnikov, S. A. / Kalabukhov, A. S. / Chupakhin, S. A. / Matveets, L. V. / International Cryogenic Engineering Committee et al. | 1998
    427
    Nonlinear resistance in high-T~c superconductors as a function of bias current density, temperature and magnetic field
    Kiss, T. / Nakamura, T. / Hasegawa, K. / Inoue, M. / International Cryogenic Engineering Committee et al. | 1998
    431
    End design of a helically wound magnet for RHIC
    Morgan, G. H. / International Cryogenic Engineering Committee et al. | 1998
    435
    30 T hybrid magnet consisting of a 10 T cryocooled superconducting magnet and a 20 T bitter-type resistive magnet
    Watanabe, K. / Motokawa, M. / International Cryogenic Engineering Committee et al. | 1998
    439
    2T-class 50 Hz AC magnet of 50 mm bore made by bronze-processed submicron-filament new Nb~3Sn cables
    Tachikawa, K. / Miyashita, K. / Sugiyama, K. / Tagawa, K. / International Cryogenic Engineering Committee et al. | 1998
    443
    First cycle operation of the SC current feeder system for the LHD
    Yamada, S. / Mito, T. / Maekawa, R. / Chikaraishi, H. / International Cryogenic Engineering Committee et al. | 1998
    447
    Recent progress on 70 MW class superconducting generators
    Takahashi, R. / Shibuya, M. / Shimada, T. / Imai, Y. / International Cryogenic Engineering Committee et al. | 1998
    451
    Development of testing apparatus for 10 kA class AC superconductors
    Takeda, K. / Chiba, M. / Fukuda, K. / Sakagami, Y. / International Cryogenic Engineering Committee et al. | 1998
    455
    Turn off trigger energy characteristics of the superconducting power electronics device (S-PED)
    Hoshino, T. / Eguchi, M. / Konishi, T. / Muta, I. / International Cryogenic Engineering Committee et al. | 1998
    459
    Angular dependence of critical current densities and normal state resistivities in silver sheathed (Bi, Pb)~2Sr~2Ca~2Cu~3O~x tapes
    Chikaba, J. / Ishimatsu, M. / Yoshida, K. / Hasebe, H. / International Cryogenic Engineering Committee et al. | 1998
    463
    Experimental analysis and modelling of the electrical and thermal transients of the diode by-pass for the LHC-magnet protection at cryogenic temperatures
    Denz, R. / Hagedorn, D. / International Cryogenic Engineering Committee et al. | 1998
    467
    A new resin system for the impregnation and bonding of large magnet coils
    Evans, D. / Canfer, S. J. / International Cryogenic Engineering Committee et al. | 1998
    471
    Using electrical measurements to determine the self-field AC losses of cable models
    Friend, C. M. / Awan, S. A. / Spiller, D. M. / Le Lay, L. / International Cryogenic Engineering Committee et al. | 1998
    475
    Hydraulic characteristics in a superconducting power transmission line
    Fuchino, S. / Tamada, N. / Ishii, I. / Okano, M. / International Cryogenic Engineering Committee et al. | 1998
    479
    Study of heater efficiency in the ATLAS barrel toroid magnet
    Gastineau, B. / Courthold, M. / Lesmond, C. / International Cryogenic Engineering Committee et al. | 1998
    487
    Semiconductor-superconductor transitions in Nb/Al structures
    Greco, M. / Lacquaniti, V. / Maggi, S. / Menichetti, E. / International Cryogenic Engineering Committee et al. | 1998
    491
    Design study for the storage efficiency of an SMES with a persistent-current switch
    Hayashi, H. / Nagai, Y. / Fuzibashi, K. / Ookuma, T. / International Cryogenic Engineering Committee et al. | 1998
    495
    Inductive method to measure very small joint resistances of superconducting wires
    Herzog, R. / Hagedorn, D. / International Cryogenic Engineering Committee et al. | 1998
    499
    Influence of contact resistance among multi-strand superconducting cables on its stability
    Hirano, N. / Seo, K. / Morita, M. / Yoshimura, H. / International Cryogenic Engineering Committee et al. | 1998
    503
    Analysis of AC loss and current distribution of co-axial multi-layer cable
    Hirasawa, T. / Fukui, S. / Yamaguchi, M. / Satoh, T. / International Cryogenic Engineering Committee et al. | 1998
    507
    RF shielding system constructed from wood, ceramics and HTS vessels
    Hotta, Y. / Mori, K. / Itoh, M. / International Cryogenic Engineering Committee et al. | 1998
    511
    Shielding characteristics and current limiting behaviours of Bi bulk superconducting rings for inductive fault current limiters
    Ito, D. / Yasunaga, T. / Ueno, E. / Tokugami, T. / International Cryogenic Engineering Committee et al. | 1998
    515
    Normal zone propagating velocity for AC transport current
    Kaiho, K. / Yamaguchi, H. / Arai, K. / Tamada, N. / International Cryogenic Engineering Committee et al. | 1998
    519
    Preparation and magnetic property of melt-processed REBaCuO-system superconductors
    Kohayashi, S. / Nagaya, S. / Yoshizawa, S. / Mukohyama, N. / International Cryogenic Engineering Committee et al. | 1998
    523
    Experimental results at pulse test facility (PTF) of butt joint used in ITER CS model coil outer module
    Koizumi, N. / Terasawa, A. / Nunoya, Y. / Takahashi, Y. / International Cryogenic Engineering Committee et al. | 1998
    527
    HTS electric motors with compound HTS-ferromagnetic rotor
    Kovalev, L. K. / Ilushin, K. V. / Koneev, S. M.-A. / Kovalev, K. L. / International Cryogenic Engineering Committee et al. | 1998
    531
    Microstructure and phase equilibria along the Bi~1~.~8Pb~0~.~4Sr~1~.~9Ca~n~-~1Cu~nO~x line between 820 C and 880 C
    Lu, X. Y. / Nagata, A. / Haritani, K. / Sugawara, K. / International Cryogenic Engineering Committee et al. | 1998
    535
    AC transport current loss in a QMG-processed Y-123 superconductor
    Matsushita, T. / Otabe, E. S. / Matsuoka, H. / Izawa, M. / International Cryogenic Engineering Committee et al. | 1998
    539
    The effect of irradiation on the critical properties of doped Bi-2223/Ag tapes
    Nikulin, A. D. / Shikov, A. K. / Akimov, I. I. / Goncharov, I. N. / International Cryogenic Engineering Committee et al. | 1998
    543
    Electromagnetic behaviour of a bulk superconducting magnet interacting with an iron piece
    Ohsaki, H. / Tokuda, M. / International Cryogenic Engineering Committee et al. | 1998
    547
    Electric motors with HTS bulk material
    Oswald, B. / Soell, M. / Gawalek, W. / Kovalev, L. / International Cryogenic Engineering Committee et al. | 1998
    551
    Electromagnetic force between bulk superconductors and permanent magnets
    Otani, T. / Nagashima, K. / Murayama, T. / Murakami, M. / International Cryogenic Engineering Committee et al. | 1998
    555
    Thermo-hydraulic quench propagation at the LHC superconducting magnet string
    Rodriguez-Mateos, F. / Schmidt, R. / Serio, L. / International Cryogenic Engineering Committee et al. | 1998
    559
    Characteristics of the kA class superconducting coil with high winding tension
    Ryu, K. / Kim, H. J. / Seong, K. C. / Oh, S. S. / International Cryogenic Engineering Committee et al. | 1998
    563
    Flux creep and pinning potential in superconducting fullerene Rb~3C~6~0
    Sakamoto, N. / Akune, T. / Baenitz, M. / Lueders, K. / International Cryogenic Engineering Committee et al. | 1998
    567
    Nb-Ti conductors with Cu-Mn matrix for DC switches
    Shikov, A. K. / Gubkin, I. N. / Vedernikov, G. P. / Nikulin, A. D. / International Cryogenic Engineering Committee et al. | 1998
    571
    Design of an HTS demonstrator transformer
    Sykulski, J. K. / Stoll, R. L. / Goddard, K. / Beduz, C. / International Cryogenic Engineering Committee et al. | 1998
    575
    Frictional characteristics on contacting surfaces between AC superconductors and coil bobbins having coefficients of negative thermal expansion
    Takao, T. / Konda, H. / Akama, H. / Maeda, N. / International Cryogenic Engineering Committee et al. | 1998
    579
    Active control of current distribution in a superconductor by composing the conductor with parallel sub-conductors
    Tsukamoto, O. / Yamagishi, K. / Wada, T. / Zhu, W. L. / International Cryogenic Engineering Committee et al. | 1998
    583
    Heat and quench propagation in HTSC coils with bobbins from different materials (part 1, experiment)
    Vysotsky, V. S. / Kiss, T. / Ilyin, Y. A. / Takeo, M. / International Cryogenic Engineering Committee et al. | 1998
    587
    Analysis of the stability margin on cryogenic parameters and transient disturbance in cable-in-conduit Nb~3Sn conductors
    Wang, Q.-L. / Oh, S.-S. / Ha, D.-W. / Ryu, K.-S. / International Cryogenic Engineering Committee et al. | 1998
    591
    Combination problems of the HTS permanent magnet
    Wang, Y. / Lin, L. Z. / Jiang, X. H. / International Cryogenic Engineering Committee et al. | 1998
    595
    Interstrand coupling loss in different stages of a multi-strand cable exposed to an external magnetic field
    Yazawa, T. / Nijhuis, A. / Ten Haken, B. / Ten Kate, H. H. J. / International Cryogenic Engineering Committee et al. | 1998
    601
    Operating experience with the first TESLA test facility (TFF) cryomodule
    Weisend, J. G. / Bandelmann, R. / Barni, D. / Bosotti, A. / International Cryogenic Engineering Committee et al. | 1998
    605
    Cool-down analysis of the ITER central solenoid model coil
    Shimba, T. / Taneda, M. / Harada, J. / Honda, T. / International Cryogenic Engineering Committee et al. | 1998
    609
    Problems encountered with sub-atmospheric circuits on the Tore Supra cryogenic system
    Minot, F. / Gravil, B. / Bocquillon, A. / Dugas, C. / International Cryogenic Engineering Committee et al. | 1998
    613
    Development of a superfluid-cooled cryostat for a 1 GHz NMR spectrometer-detailed design
    Sato, A. / Miki, T. / Matsumoto, F. / Nagai, H. / International Cryogenic Engineering Committee et al. | 1998
    617
    Study of exergetic losses occurring with liquid helium transfill operations
    Voigt, T. / International Cryogenic Engineering Committee et al. | 1998
    623
    New cryogenic facilities for testing superconducting equipment for the CERN large hadron collider
    Barth, K. / Dauvergne, J.-P. / Delikaris, D. / Delruelle, N. / International Cryogenic Engineering Committee et al. | 1998
    627
    Mechanical stability of the LHC dipole-dipole 50-75 K thermal shield interconnect-`floating' expansion joint concept
    Skoczen, B. / International Cryogenic Engineering Committee et al. | 1998
    631
    Applying advanced control techniques for temperature regulation of the LHC superconducting magnets
    Flemsoeter, B. / Blanco, E. / Casas-Cabillos, J. / De Prada, C. / International Cryogenic Engineering Committee et al. | 1998
    635
    Quality testing of gaseous helium pressure vessels by acoustic emission
    Barranco-Luque, M. / Cherfaoui, M. / Herve, C. / Margaroli, C. / International Cryogenic Engineering Committee et al. | 1998
    639
    Thermal performance of the LHC external auxiliary bus-bar tube: mathematical modelling
    Kowalczyk, P. / Poncet, A. / Sacre, P. / Skoczen, B. / International Cryogenic Engineering Committee et al. | 1998
    643
    The liquid krypton calorimeter cryogenics for the NA48 experiment
    Bremer, J. / Cundy, D. / Dauvergne, J.-P. / Gonidec, A. / International Cryogenic Engineering Committee et al. | 1998
    647
    Thermal characterization of the He II LHC heat exchanger tube
    Camacho, D. / Chevassus, S. / Policella, C. / Rieubland, J. M. / International Cryogenic Engineering Committee et al. | 1998
    651
    Wall temperature fluctuation and self-compensation effect of two-phase flow in a new condenser-boiler in liquid nitrogen
    Chen, L. / Li, Z. / Wu, Y. / Li, S. / International Cryogenic Engineering Committee et al. | 1998
    655
    Investigation on boiling heat transfer of liquid nitrogen in a lunate channel
    Chen, L. / Li, S. / Wu, Y. / Zhang, H. / International Cryogenic Engineering Committee et al. | 1998
    659
    Creation of nonboiling cryoliquids as an environment for SPM
    Lohmus, A. / Lohmus, R. / Dzelme, J. / Lindahl, J. / International Cryogenic Engineering Committee et al. | 1998
    663
    Investigation of large dynamic range performance of a cryogenic two-phase thermosyphon
    Nakano, A. / Shiraishi, M. / Nishio, M. / Murakami, M. / International Cryogenic Engineering Committee et al. | 1998
    667
    Experimental investigation of heat transfer between gas and solid in a cryogenic vibrated fluidized bed
    Liang, Y. / Guo, Y. Y. / Bian, D. J. / Wang, X. X. / International Cryogenic Engineering Committee et al. | 1998
    671
    Hydraulic behaviour of He II in stratified counter-current two-phase flow
    Rousset, B. / Gauthier, A. / Jager, B. / Van Weelderen, R. / International Cryogenic Engineering Committee et al. | 1998
    675
    Cryogenic jet turbulence in gaseous ^4He around 4 K
    Chanal, O. / Castaing, B. / Chabaud, B. / Hebral, B. / International Cryogenic Engineering Committee et al. | 1998
    679
    Heat transport characteristics in He II channels separated by a porous spacer
    Okamura, T. / Hamaguchi, S. / Okada, T. / Kabashima, S. / International Cryogenic Engineering Committee et al. | 1998
    683
    Critical heat flux on various sized flat plates in pressurized He II
    Tatsumoto, H. / Hata, K. / Takeuchi, Y. / Hama, K. / International Cryogenic Engineering Committee et al. | 1998
    687
    Transient heat transfer caused by a stepwise heat input to a flat plate in pressurized He II
    Shiotsu, M. / Hata, K. / Takeuchi, Y. / Hama, K. / International Cryogenic Engineering Committee et al. | 1998
    691
    Visualization study of phase transitions of He II induced by shock wave compression
    Takano, N. / Nagai, H. / Yang, H. / Murakami, M. / International Cryogenic Engineering Committee et al. | 1998
    695
    A cryogenic temperature sensor using a fibre Bragg grating
    Albin, S. / Fu, W. / Zheng, J. / Lavarias, A. C. / International Cryogenic Engineering Committee et al. | 1998
    699
    Characteristics of the TVO temperature sensor
    Suesser, M. / International Cryogenic Engineering Committee et al. | 1998
    703
    Coaxial resonators for monitoring cryogenic flows
    Glavatskikh, S. B. / Arkharov, A. M. / Grechko, A. G. / Zherdev, A. A. / International Cryogenic Engineering Committee et al. | 1998
    707
    FPS51B-a small piezo-resistive silicon pressure sensor for use in superfluid helium
    Haruyama, T. / Kimura, N. / Nakamoto, T. / International Cryogenic Engineering Committee et al. | 1998
    711
    Characterization of Josephson junction bolometers by a fibre-coupled system
    Rajteri, M. / Monticone, E. / Picotto, G. B. / Steni, R. / International Cryogenic Engineering Committee et al. | 1998
    715
    On the emissivity of silver-coated panels, effect of long-term stability and effect of coating thickness
    Ageladarakis, P. A. / Obert, W. / International Cryogenic Engineering Committee et al. | 1998
    719
    Analytical study of the behaviour of the cold mass supports of the ATLAS barrel toroid
    Alessandria, F. / Ambrosio, G. / International Cryogenic Engineering Committee et al. | 1998
    722
    Preliminary results of thermal and electrical conductivity measurement at cryogenic temperatures of riveted junctions for the thermal shield of the ATLAS barrel toroid
    Alessandria, F. / Ambrosio, G. / International Cryogenic Engineering Committee et al. | 1998
    727
    Neutron irradiation tests in superfluid helium of LHC cryogenic thermometers
    Amand, J.-F. / Casas-Cubillos, J. / Junquera, T. / Thermeau, J.-P. / International Cryogenic Engineering Committee et al. | 1998
    731
    Investigation of the He-Ne mixture separation process on silica glass
    Arkharov, A. M. / Arkharov, I. A. / Nikiforov, U. V. / Mikhailov, A. V. / International Cryogenic Engineering Committee et al. | 1998
    735
    Research-industrial plant for production of high-purity neon
    Arkharov, A. M. / Purtov, S. N. / Arkharov, I. A. / Bondarenko, V. L. / International Cryogenic Engineering Committee et al. | 1998
    739
    Current feedthroughs for superconducting magnets operating below 2 K
    Benda, V. / Zilbert, O. / International Cryogenic Engineering Committee et al. | 1998
    743
    The cryogenics of the LHC interaction region final focus superconducting magnets
    Byrns, R. / Huang, Y. / Kerby, J. / Lebrun, P. / International Cryogenic Engineering Committee et al. | 1998
    747
    Operation, testing and long-term behaviour of the LHC test string cryogenic system
    Casas-Cubillos, J. / Provenaz, P. / Serio, L. / Suraci, A. / International Cryogenic Engineering Committee et al. | 1998
    751
    Cryogenic thermometer calibration system using a helium cooling loop and a temperature controller
    Chanzy, E. / Junquera, T. / Thermeau, J.-P. / Buhler, S. / International Cryogenic Engineering Committee et al. | 1998
    755
    Thermo-mechanical analysis of cold helium injection into gas storage tanks made of carbon steel following resistive transistion of the LHC magnets
    Chorowski, M. / Skoczen, B. / International Cryogenic Engineering Committee et al. | 1998
    759
    Irradiation tests at cryogenic temperatures of diffusion-type diodes for the LHC superconducting magnet protection
    Denz, R. / Gerstenberg, H. / Hagedorn, D. / International Cryogenic Engineering Committee et al. | 1998
    763
    Development of a prototype superfluid helium safety relief valve for the LHC superconducting magnets
    Doerrenbach, C. / International Cryogenic Engineering Committee et al. | 1998
    767
    RF system to measure void fraction of two-phase hydrogen flow
    Filippov, Y. P. / Kovrizhnykh, A. M. / Romanov, S. V. / International Cryogenic Engineering Committee et al. | 1998
    771
    Tests of the thermometers and cold multiplexers under irradiation
    Filippov, Y. P. / Golikov, V. V. / Miklayev, V. M. / Romanov, S. V. / International Cryogenic Engineering Committee et al. | 1998
    775
    The effect of energization current on the calibration of silicon diode thermometers
    Gowlett, D. J. / McDonald, P. C. / International Cryogenic Engineering Committee et al. | 1998
    781
    A novel method of solving coupled heat and mass transfer in porous media with a moving phase-change front
    Guo, Y. Y. / Liu, Y. Z. / Gong, D. Q. / International Cryogenic Engineering Committee et al. | 1998
    785
    Pressure drop characteristics of ITER CS model coil conductor
    Hamada, K. / Kato, T. / Koizumi, N. / Nakagima, H. / International Cryogenic Engineering Committee et al. | 1998
    789
    A model for the CHF of a one-wall heated rectangular He II channel
    Hata, K. / Shiotsu, M. / Takeuchi, Y. / Hama, K. / International Cryogenic Engineering Committee et al. | 1998
    793
    Supercritical helium cooling of the LHC beam screens
    Hatchadourian, E. / Lebrun, P. / Tavian, L. / International Cryogenic Engineering Committee et al. | 1998
    797
    New cryosurgical devices for cryolesion of tumours and pain elimination
    Herzog, R. / Binneberg, A. / Boehm, M. / Schumann, B. / International Cryogenic Engineering Committee et al. | 1998
    801
    Heat-transfer characteristics of liquid helium with different surface width and length
    Iwamoto, A. / Maekawa, R. / Mito, T. / Satoh, S. / International Cryogenic Engineering Committee et al. | 1998
    805
    Heat transfer characteristics in parallel channels of pressurized He II and metastabilization of a superconducting coil
    Kobayashi, H. / Sakata, M. / Fujimura, Y. / Murata, T. / International Cryogenic Engineering Committee et al. | 1998
    809
    Nb/TaO~x/Nb Josephson junctions for a programmable voltage standard
    Lacquaniti, V. / Gonzini, S. / Maggi, S. / Monticone, E. / International Cryogenic Engineering Committee et al. | 1998
    813
    Cooldown and warmup studies for the Large Hadron Collider
    Lebrun, P. / Riddone, G. / Tavian, L. / Wagner, U. / International Cryogenic Engineering Committee et al. | 1998
    817
    Doped GdCl~3 high-resolution thermometers for use near to the lambda point
    Lee, R. A. M. / Harter, A. W. / Chui, T. C. P. / International Cryogenic Engineering Committee et al. | 1998
    821
    Pressure considerations to predict peak heat fluxes in saturated and pressurized He II
    Li, Y. Z. / Chen, C. Z. / International Cryogenic Engineering Committee et al. | 1998
    827
    High-resolution germanium diode level detector for cryogenic liquids
    Chen, L. / Wu, Y. / Lu, Y. / International Cryogenic Engineering Committee et al. | 1998
    831
    Numerical model for helium flow in a dual-channel cable-in-conduit conductor
    Martinez, A. / International Cryogenic Engineering Committee et al. | 1998
    835
    Stability analysis for a pressurized He II cooling system with tube heat exchangers
    Miki, T. / Sato, A. / Matsumoto, F. / Nagai, H. / International Cryogenic Engineering Committee et al. | 1998
    839
    Gas transport in small rectangular ducts for the cooling of high-T~c superconductors
    Mo, H. L. / Zhou, Y. X. / Zhu, T. Y. / Guo, T. W. / International Cryogenic Engineering Committee et al. | 1998
    843
    Investigation of two modes of shock wave in He II by using a newly developed superfluid shock tube facility
    Nagai, H. / Yang, H. / Takano, N. / Murakami, M. / International Cryogenic Engineering Committee et al. | 1998
    847
    Thermal and mechanical strain measurement of support structures of the Large Helical Device
    Nishimura, A. / Tamura, H. / Imagawa, S. / Mito, T. / International Cryogenic Engineering Committee et al. | 1998
    851
    An original rotating cryostat for the experiment PVLAS
    Pengo, R. / Petrucci, G. / Marigo, S. / International Cryogenic Engineering Committee et al. | 1998
    855
    The cryogenic control network at the Forschungszentrum Karlsruhe
    Perinic, G. / International Cryogenic Engineering Committee et al. | 1998
    859
    The cryogenic supply of a VUV free electron laser at the TESLA test facility at DESY
    Petersen, B. / Lierl, H. / Sellmann, D. / Wolff, S. / International Cryogenic Engineering Committee et al. | 1998
    863
    Low-noise cryogenic cooling systems for electronic devices
    Spoerl, G. / Binneberg, A. / Buschmann, H. / Herzog, R. / International Cryogenic Engineering Committee et al. | 1998
    867
    The Vinis cryogenic transfer line
    Stokic, D. / Pesic, S. / Oklobdzija, N. / International Cryogenic Engineering Committee et al. | 1998
    871
    Mechanical behaviour of cryogenic components in the LHD
    Tamura, H. / Nishimura, A. / Imagawa, S. / Maekawa, R. / International Cryogenic Engineering Committee et al. | 1998
    875
    Design of the NHMFL 900 MHz NMR magnet cryostat
    Welton, S. J. / Cantrell, K. / Markiewicz, W. D. / Van Sciver, S. W. / International Cryogenic Engineering Committee et al. | 1998
    879
    The cryogenic system of TESLA 500-an update
    Wolff, S. / Lierl, H. / Petersen, B. / Weisend, J. / International Cryogenic Engineering Committee et al. | 1998
    883
    Experiences with 1.8 K forced flow He II cooling of a large superconducting magnet
    Zahn, G. / Darweschsad, M. / Dittrich, G. / Fink, S. / International Cryogenic Engineering Committee et al. | 1998

    Wie erhalte ich diesen Titel?

    Exportieren, teilen und zitieren

    Feedback