Influence of Surface Stickiness of Food Products to Agglomeration in Spray Drying (Englisch)

In: Particle technology   ;  163e  ;  2006
  • ISBN:
  • Aufsatz (Konferenz)  /  Print

Wie erhalte ich diesen Titel?

Inhaltsverzeichnis Konferenzband

Die Inhaltsverzeichnisse werden automatisch erzeugt und basieren auf den im Index des TIB-Portals verfügbaren Einzelnachweisen der enthaltenen Beiträge. Die Anzeige der Inhaltsverzeichnisse kann daher unvollständig oder lückenhaft sein.

17a
Particle Formation Processes
American Institute of Chemical Engineers | 2006
34a
Particle and Bulk Solids Handling Technology - Bridging the Theory Practice Gap
Roberts, A. / American Institute of Chemical Engineers | 2006
41
Production of magnetic beads for bio-separation - Process scale-up
Banert, T. / Peuker, U.A. | 2005
49a
Colloiods and Dispersions
American Institute of Chemical Engineers | 2006
57
High throughput screening of low temperature CO oxidation and VOC combustion catalysts
Cypes, Stephen / Bergh, H. Sam / Hagemeyer, Alfred / Hogan, Zachary / Lesik, Andreas / Sokolovskii, Valery / Streukens, Guido / Weinberg, W.Henry | 2005
68a
Particle and Product Design Strategies through Interfacial Engineering
Peukert, W. / American Institute of Chemical Engineers | 2006
87a
Storage and Feeding of Bulk Solids
Arnold, P. C. / American Institute of Chemical Engineers | 2006
109a
Multiscale Modeling of Dense Phase Gas-Particle Flow
Tsuji, Y. / American Institute of Chemical Engineers | 2006
124a
Particle Segregation Problems and Solutions
Carson, J. / American Institute of Chemical Engineers | 2006
147a
Electrical Capacitance Volume Tomography for Process Imaging
Fan, L. S. / American Institute of Chemical Engineers | 2006
174a
Pneumatic Conveying and Measurements
Wypych, P. W. / American Institute of Chemical Engineers | 2006
210a
Review of Dem and Its Applications
American Institute of Chemical Engineers | 2006
229a
Functional Nanoparticles Made in Flame Aerosol Reactors
Pratsinis, S. / American Institute of Chemical Engineers | 2006
253a
Non-Intrusive Measurement of Industrial Processes
Bolton, G. / Williams, R. A. / Stanley, S. / American Institute of Chemical Engineers | 2006
266e
An Analysis of the Chaotic Motion of Particles of Different Sizes in a Gas Fluidized Bed
Feng, Y. Q. / Yu, A. B. / American Institute of Chemical Engineers | 2006
595
Pipeline integrity of ethylene pipelines
Nordquist, Greg | 2005
611
Waste stream incineration results in combustion in decoke piping
Saunders, Randy | 2005
831
Turboexpanders in ethylene plants
Lillard, Joseph K. | 2005
891
Impact of ethylene emissions on commercial crops
Foster, Kenneth R. / Jack, Thomas R. / Dixon, Jim / Li, Xiaomei / Archambault, Daniel J. | 2005
1013
Towards comprehensive CFD modeling of lean premixed ultra-low NO x burners in process heaters
Tang, Q. / Adams, B. / Bockelie, M. / Cremer, M. / Denison, M. / Montgomery, C. / Sarofim, A. / Brown, D.J. | 2005
1141
Development of new catalyst systems and innovative solutions for meeting new diesel specifications
Sau, Madhusudan / Manna, Ujjwal / Butley, Ganesh V. / Biswas, Hillol / Santra, Manoranjan / Verma, Ram Prakash | 2005
1509
Molten salt/helium comparison for intermediate heat exchange loop
Task, Keith D. / Lahoda, Edward J. / Paoletti, Lauren | 2005
1837
Mixed fluid power rankine cycle using LNG as heat sink with LPG extraction
Mak, John Y. / Nielsen, Dick / Graham, Curt | 2005
2059
Limitations in LNG vaporization process selection
Cho, Joseph H. / Mathur, Gopal / Kotzot, Heinz / Durr, Charles | 2005
2351
Carbon fiber textiles for fuel cells
Kennedy, Paul / Crawford, Jim | 2005
2533
Steam cracking and natural gas to olefins: Energy efficiency and CO 2emissions
Ren, Tao / Patel, Martin / Blok, Kornelis | 2005
3183
Reactor control using infinite horizon model predictive control
Caveness, Michelle H. / Downs, James J. | 2005
3265
Microfabricated fuel cells with thin-film silicon dioxide proton exchange membranes
Moore, Christopher W. / Li, Jun / Kohl, Paul A. | 2005
Extension to Smoluchowski's Population Balance Equation to Include Liquid Binder
Rynhart, P. R. / MacLachlan, R. / Jones, J. R. / McKibbin, R. / American Institute of Chemical Engineers | 2006
One-Step Fabrication of Core-Shell Nanofibers from Electrified Coaxial Jets
Diaz, J. E. / Lallave, M. / Marquez, M. / Barrero, A. / Loscertales, I. G. / American Institute of Chemical Engineers | 2006
Preparation of Spherical Nanostructured Particles of Lithium Manganese Oxides by a Spray Pyrolysis and Fluidized Bed Hybrid System
Taniguchi, I. / Furubayashi, H. / Matsuda, K. / Nakajima, S. / American Institute of Chemical Engineers | 2006
Discretization of Temperature and Moisture for Determining Surface Stickiness of Single Droplets during Drying
Werner, S. R. L. / Edmonds, R. L. / Jones, J. R. / Bronlund, J. E. / Paterson, A. H. J. / American Institute of Chemical Engineers | 2006
Coating and Granulation of Fine Particles in Fluidized Bed
Yang, J. / Chen, Y. / Dave, R. / Pfeffer, R. / American Institute of Chemical Engineers | 2006
Direct Numerical Simulation of Particle-Fluid Flow: the State-of-the-Art
Ho, T. X. / Kosinski, P. / Hoffmann, A. C. / American Institute of Chemical Engineers | 2006
Investigation of Layer-Inversion and Mixing in Binary-Solid Liquid-Fluidized Beds Using a Combined Continuum and Discrete Model
Malone, K. F. / Xu, B. H. / Fairweather, M. / American Institute of Chemical Engineers | 2006
Crystal Size and Shape Monitoring Using High-Speed, in-Situ Video Imaging and Model Based Recognition
Larsen, P. A. / Ferrier, N. J. / Rawlings, J. B. / American Institute of Chemical Engineers | 2006
Online Particle Size Measurement in a High Pressure Antisolvent Process
Seiffert, U. W. / Schlucker, E. / American Institute of Chemical Engineers | 2006
Mechanochemical Preparation of Nano-Sized Pharmaceutical Drugs for Application in Cancer Therapy
Choi, W. S. / Balaz, P. / Godocikova, E. / Seong, M. J. / Cha, B. J. / Noh, G.-J. / Choi, B.-M. / Balaz, P. J. / American Institute of Chemical Engineers | 2006
Influence of mixing process characteristics for aqueous phase encapsulation by silica nanoparticles
Forny, L. / Saleh, K. / Pezron, I. / Komunjer, L. / Guigon, P. / American Institute of Chemical Engineers | 2006
Application of Observation Techniques in a Model Predictive Control Framework of Fed-Batch Crystallization of Ammonium Sulphate
Kalbasenka, A. N. / Landlust, J. / Huesman, A. E. M. / Kramer, H. J. M. / American Institute of Chemical Engineers | 2006
Radiopaque flame-made Ta~2O~5/SiO~2 nanoparticles with controlled refractive index and transparency
Schulz, H. / Madler, L. / Pratsinis, S. / Burtscher, P. / Moszner, N. / American Institute of Chemical Engineers | 2006
Cubic or Monoclinic Y~2O~3:Eu Nanoparticles by Flame Spray Pyrolysis
Camenzind, A. / Strobel, R. / Pratsinis, S. E. / American Institute of Chemical Engineers | 2006
Some Hydrodynamic Characteristics of Gas Fluidized Beds at High Temperatures
Radmanesh, R. / Chaouki, J. / Guy, C. / American Institute of Chemical Engineers | 2006
The Effects of the Operational Parameters on the Characteristics of Protein Microparticles
Toth, J. / Kardos-Fodor, A. / Halasz-Peterfi, S. / Gyenis, J. / American Institute of Chemical Engineers | 2006
Application of Turbulent Taylor-Couette Flow to Study the Shear Strength of Biological Aggregates
Farnood, R. / Yuan, Y. / American Institute of Chemical Engineers | 2006
Optimum Cell Condition for Fast Contact Detection in the Algorithm of Dem and Its Application to Large-Computing
Mio, H. / Shimosaka, A. / Shirakawa, Y. / Hidaka, J. / American Institute of Chemical Engineers | 2006
Measuring Size Distribution of Organic and Inorganic Crystals of Different Shapes Using Different Technologies
Patchigolla, K. / Wilkinson, D. / li, M. / American Institute of Chemical Engineers | 2006
Determination of Particle Size Distributions Based on Space and Time Resolved Extinction Profiles in Centrifugal Field
Detloff, T. / Lerche, D. / American Institute of Chemical Engineers | 2006
Rheological Properties of a Suspension of Disintegrated Yeast Cells
Solecki, M. / Heim, A. / Owczarz, P. / Frances, C. / Delia, M.-L. / Kilbey, G. / American Institute of Chemical Engineers | 2006
New Measurement of Particle Size Distribution by Bouyancy Weighing Method
Obata, E. / Ohira, Y. / Ohta, M. / American Institute of Chemical Engineers | 2006
Characterization of Nanosize Silica Particle Surface Designed on a Molecular Level
Takai, C. / Fuji, M. / Takahashi, M. / American Institute of Chemical Engineers | 2006
The Analysis of Fracture Surfaces of Bi-Layer Tablets of Microcrystalline Cellulose (MCC) Using Laser Profilometry
Inman, S. J. / Briscoe, B. J. / Pitt, K. G. / American Institute of Chemical Engineers | 2006
Self-Assembly of Biopolymer Gel Networks within Hydrating Particles
Sukha, P. R. / Bhandari, B. / Howes, T. / Gidley, M. / American Institute of Chemical Engineers | 2006
Precision Emulsification of Droplets and Capsules
Hou, R. / Aryanti, N. / Williams, R. / Vladisavljevic, G. / American Institute of Chemical Engineers | 2006
The electrostatics enhancing particle filtration begins to be used in powder station and waste incineration to clean the flue gas. The humidity of flue gas plays an important role in this technology. It changes the ability of particle charging and the str
Huang, B. / American Institute of Chemical Engineers | 2006
Incidence of the mixture composition in stability angles of granular materials in cement production
Vidales, A. M. / Ippolito, I. / Benegas, O. A. / Aguirre, F. / Nocera, O. C. / Baudino, M. R. / American Institute of Chemical Engineers | 2006
Synthesis of Au/Tio2 Core-Shell Nanoparticles by Sol-Gel Method
Yu, Y.-t. / Kwon, H. W. / Yoon, J. M. / Chen, Y. / American Institute of Chemical Engineers | 2006
A study on G/D optimization of a centrifugal mill by the particle size of product
Lee, H. / Cho, H. / Lee, J. / American Institute of Chemical Engineers | 2006
A 2D DEM study of Geldart group A particle bed fluidization behaviour
Kafui, D. K. / Yang, F. / Thornton, C. / Seville, J. P. K. / American Institute of Chemical Engineers | 2006
Thermodynamic Analysis of Core-Annular Flow in a Cfb
Breault, R. W. / American Institute of Chemical Engineers | 2006
Experimental Study of Electrostatic Separation of Different Component Particles in Mixture Using a Rotating Conical Vessel
Yamamoto, K. / Ogura, H. / Honda, Y. / Sugimoto, M. / American Institute of Chemical Engineers | 2006
Preparation and Characterization of Ceramic Porous Filter Using Pottery Raw Materials
Ye, S. / Wu, Z. / Chen, Y. / Zhu, T. / Yu, Y.-t. / American Institute of Chemical Engineers | 2006
Coating of Ultra-Fine Particles Using Supercritical Fluids
Shen, Y. / Gokhale, A. / Wei, D. / Dave, R. / Pfeffer, R. / American Institute of Chemical Engineers | 2006
Computer Simulation of Microstructure Evolution in Spray-Dried Particles
Osunde, A. O. / Stepanek, F. / American Institute of Chemical Engineers | 2006
The Effect of Humidity on Granule Strength
Sochon, R. / Gabbott, I. / Hounslow, M. J. / Salman, A. / American Institute of Chemical Engineers | 2006
Finite Element Simulations of the Impact of Elastic Particles with Liquid Films on Solid Surfaces
Wong, D. C. Y. / Fryer, P. J. / Seville, J. P. K. / Adams, M. J. / American Institute of Chemical Engineers | 2006
A Mathematical Model for the Vacuum Extraction of Hydrocarbons from Soil
Naimpally, A. V. / Sajadi, H. M. / Jorgensen, B. / Chiu, E. / Dumalski, M. / Garcia, D. / American Institute of Chemical Engineers | 2006
Formulation of Large Hollow Nanoparticles Aggregates as Potential Carriers of Inhaled Drug Nanoparticles
Ong, K. H. / Phanapavudhikul, P. / American Institute of Chemical Engineers | 2006
A general approach for the characterization of fragmentation problems
Toneva, P. / Peukert, W. / American Institute of Chemical Engineers | 2006
A New Method for the Analysis of Compaction Processes in High-Porosity Agglomerates
Heim, L.-O. / Butt, H.-J. / Blum, J. / Schrapler, R. / American Institute of Chemical Engineers | 2006
Understanding Intra-Mixture Interactions in the Breakage of Dense Particulate Mixtures
Abu-Nahar, A. / Baxter, J. / Tuzun, U. / American Institute of Chemical Engineers | 2006
Influence of Liquid Binder Dispersion on Agglomeration in an Intensive Mixer
Ax, K. / Feise, H. / Salman, A. D. / Sochon, R. / Hounslow, M. J. / American Institute of Chemical Engineers | 2006
Qualitative Assessment of the Influence of Coordination Number on Crushing Strength Using Dem
Sukumaran, B. / Einav, I. / Dyskin, A. / American Institute of Chemical Engineers | 2006
Penetration and Rebound of Steel Projectile from Aggregated Particles in Random Packing
Nishida, M. / Tanaka, K. / Ikeda, Y. / American Institute of Chemical Engineers | 2006
Issues concerning Simulation of Industrial Particulate Handling and Processing Operations Using the Discrete Element Method
Favier, J. / American Institute of Chemical Engineers | 2006
Development of Micromechanical Models for Particulate Media: the Projection Problem in the Transition from Particle to Bulk Mechanical Properties
Tordesillas, A. / Walsh, S. D. / Peters, J. F. / American Institute of Chemical Engineers | 2006
Breakage Distribution Functions Based on Fracture Mechanics
Hill, P. J. / American Institute of Chemical Engineers | 2006
Design, Control and Direct Visualization of Heterogeneous Structure in Colloidal Aggregates and Gels (Invited Talk)
Solomon, M. J. / American Institute of Chemical Engineers | 2006
Understanding the Gas Residence Times in Reverse Flow Cyclones
Cocco, R. / Jacob, K. / American Institute of Chemical Engineers | 2006
Stability of Granules Formed by Solid Bridging
Kohlus, R. / American Institute of Chemical Engineers | 2006
Comparative Evaluation of Elbows for Pneumatic Conveying Systems
Wagner, P. / American Institute of Chemical Engineers | 2006
Dynamic Mechanisms of a Vibration Bed under Weakly Excitation
Tai, C. H. / Hsiau, S. S. / Huang, T. C. / American Institute of Chemical Engineers | 2006
Modeling of dense particle flow in the annulus of spouted beds with draft tube
Zhao, X.-L. / Yao, Q. / Li, S.-Q. / Zhang, X. / American Institute of Chemical Engineers | 2006
Silica Gel and Hydroxyapatite Composites with Ormosils for Heavy Metal Removal from Water
Hadioui, M. / Mecherri, M. O. / Sharrock, P. / American Institute of Chemical Engineers | 2006
Real-Time Particle Size and Shape Characterization Using in-Process Video Imaging Process Analytical Technology (Pat)
Hukkanen, E. J. / Smith, B. / American Institute of Chemical Engineers | 2006
Numerical Simulation of Complex Fluid-Solid Flows
Chu, K. W. / Yu, A. B. / American Institute of Chemical Engineers | 2006
Tracking pellet motion in a Wurster coater using positron emission
Palmer, S. E. / Seville, J. P. K. / Ingram, A. / Fitzpatrick, S. / Fan, X. / American Institute of Chemical Engineers | 2006
Powder Characterization as Tool for Successful Product Development
Borchers, G. / American Institute of Chemical Engineers | 2006
Influence of Filling Procedure on the Failure Strength of Powders in a Uniaxial Tester
Nysaeter, T. O. / Enstad, G. G. / American Institute of Chemical Engineers | 2006
Real-Time Hrtem of Atomic-Size Metal Nanowires
Ugarte, D. / Ugarte, D. M. / American Institute of Chemical Engineers | 2006
Drying of Crystals at Particle-Scale: Modelling and Tomographic Visualisation
Kohout, M. / Grof, Z. / Stepanek, F. / American Institute of Chemical Engineers | 2006
Modification and Re-Interpretation of Geldart's Classification of Powders
Yang, W.-C. / American Institute of Chemical Engineers | 2006
Jet Hydrodynamics around Fluidized Bed Spargers
Cocco, R. / Cai, P. / American Institute of Chemical Engineers | 2006
The Influence of Cohesion on Segregation Mechanisms
Johanson, K. / American Institute of Chemical Engineers | 2006
Process Function of Stirred Media Milling
Kwade, A. / Mende, G. / American Institute of Chemical Engineers | 2006
Numerical Simulations of Granular Materials Flow around Obstacles: the Role of the Interstitial Gas
Levy, A. / Sayed, M. / American Institute of Chemical Engineers | 2006
Particulate Drug Delivery
American Institute of Chemical Engineers | 2006
Determination of the Kinetic Parameters of the Limestone Size Reduction in a Laboratory Ball Mill; Application to the Design of an Industrial Mill
Renedo, M. J. / Fernandez, J. / Cagigal, B. D. / American Institute of Chemical Engineers | 2006
Solidsim - Teaching the Complexity of Solid Processes
Hartge, E.-U. / Pogodda, M. / Reimers, C. / Schwier, D. / Gruhn, G. / Werther, J. / American Institute of Chemical Engineers | 2006
Strange Phenomena and Resonance in Vibrationally Fluidised Beds
Wensrich, C. / American Institute of Chemical Engineers | 2006
Design of a Laser Assisted Aerosol Reactor for Production of Ceramics on Semi-Industrial Scale
van Erven, J. W. M. / Trzeciak, T. M. / Fu, Z. / Marijnissen, J. C. M. / American Institute of Chemical Engineers | 2006
Thermal and Crystalline Stability of Silica-Tungsta/Titania Particles Made by Flame Spray Pyrolysis
Jossen, R. / Heine, M. C. / Akhtar, K. M. / Pratsinis, S. E. / American Institute of Chemical Engineers | 2006
Gas-Phase Nanoparticle Production, Handling and Separation by Aerodynamic Effects in Supersonic Expansion
Piseri, P. / Wegner, K. / Bongiorno, G. / Vinati, S. / Milani, P. / American Institute of Chemical Engineers | 2006
Understanding Critical Parameters in Roller Compaction Process and Development of a Novel Scaling Method
Li, F. / Meyer, R. F. / Chern, R. / American Institute of Chemical Engineers | 2006
Couette Flows with a Bimodal Particle Mixture
Liu, X. / Conway, S. / Glasser, B. / American Institute of Chemical Engineers | 2006
Effect of Process Variables on Fluid Bed Granulation and Coating - in-Line Monitoring of Granule Size and Population
Hubert, M. / Birkmire, A. / Smith, B. / Dycus, E. / Walter, K. T. / American Institute of Chemical Engineers | 2006
Information Content Analysis of near Infrared Spectral Data for in-Line Monitoring of Batch Crystallisation
Abebe, S. B. / American Institute of Chemical Engineers | 2006
Applications of Rice Hull Ash Filter Aid in Bio-Sludge Deliquoring
Li, W. / Kiser, C. / Richard, Q. / Garrett, T. / American Institute of Chemical Engineers | 2006
Design and Optimization Process of Solvent Extraction in E.W unit of Sarcheshmeh Copper Infactory
Farahbakhsh, a. / American Institute of Chemical Engineers | 2006
Safety Issues in Particle Handling
Bell, T. / Gravell, B. / American Institute of Chemical Engineers | 2006
Influence of Supra-Molecular Structure and Storage Conditions on the Caking of Powders
Palzer, S. / American Institute of Chemical Engineers | 2006
Temperature Gradient Induced Caking of Pharmaceutical Grade Salt
Paterson, A. H. J. / Bronlund John, E. / Anthony, K. J. / American Institute of Chemical Engineers | 2006
Sol-Gel Production of Zro2 and 8ysz with a New Organic Precursor
Suciu, C. / Hoffmann, A. C. / Gagea, L. / American Institute of Chemical Engineers | 2006
Investigation of the Formation of Jets in a Three-Dimensional Gas-Fluidized Bed Using Magnetic Resonance Imaging
Muller, C. R. / Rees, A. C. / Mantle, M. D. / Sederman, A. J. / Davidson, J. F. / Dennis, J. S. / Fennell, P. S. / Gladden, L. F. / Hayhurst, A. N. / American Institute of Chemical Engineers | 2006
Transversal Dispersion of Granular Material on Vibrating Conveyor
Grochowski, R. / Walzel, P. / American Institute of Chemical Engineers | 2006
Investigations on Agglomeration in Gas Cyclones
Gronald, G. / Staudinger, G. / American Institute of Chemical Engineers | 2006
Experimental and Numerical Analysis of Fe~2O~3- Particle Formation in Spray Roasting Reactors
Beck, M. / Wirtz, S. / Scherer, V. / American Institute of Chemical Engineers | 2006
A Model to Determine the Packing Density of Fly Ash Slurries
Jones, M. / Bunn, T. / Donohue, T. J. / Wheeler, C. / American Institute of Chemical Engineers | 2006
Fluidization of Nano-Sized Particles - Design and Operation Issues
Wang, S. / Rahman, F. / Rhodes, M. / American Institute of Chemical Engineers | 2006
Recent Development of Powder Technology in Japan
Masuda, H. / American Institute of Chemical Engineers | 2006
Filtration Characteristics of Anatase Colloids
Nabi, R. / Biggs, S. / Poole, C. / Hebditch, D. / Baker, G. / Clark, W. / American Institute of Chemical Engineers | 2006
Lbm Study on Rayleigh Instability of Charged Droplet
Matsuyama, T. / Abe, T. / Yamamoto, H. / American Institute of Chemical Engineers | 2006
A Mathematical Model for the Simulation of Binary Gas Fluidized Beds
Owoyemi, O. / Lettieri, P. / American Institute of Chemical Engineers | 2006
Velocity Measurements in Opaque Flowing Slurries Using Electrical Impedance Tomography
Wang, M. / Williams, R. A. / American Institute of Chemical Engineers | 2006
Agglomeration and Rheological Properties of Different Wheat Millings
Landillon, V. / Cassan, D. / Morel, M. H. / Cuq, B. / American Institute of Chemical Engineers | 2006
One-Dimensional and Two-Dimensional Particle Separation. Experiments and Theoretical Models
Lerche, D. / Detloff, T. / Sobisch, T. / American Institute of Chemical Engineers | 2006
Interface transport of nanoparticles - synthesis of oil-based magnetic fluids
Peuker, U. A. / American Institute of Chemical Engineers | 2006
From Particle Collectives Characteristics to Cake Permeability: the Use of the Pore-Particle Shape Factor
Sorrentino, J. A. / American Institute of Chemical Engineers | 2006
An Approach to Model High Shear Wet Granulation by Using a Multi-Dimensional Population Balance Equation
Darelius, A. / Rasmuson, A. / Bjorn, I. N. / Folestad, S. / Brage, H. / American Institute of Chemical Engineers | 2006
Folate Mediated Delivery of Dye-Doped Silica Nanoparticles for Biolabelling
Dutta, D. / Santra, S. / Moudgil, B. M. / American Institute of Chemical Engineers | 2006
Taking the Standards out of Shape Analysis
Williams, R. / American Institute of Chemical Engineers | 2006
Basic Investigations on Fugitive Dust Emissions Caused by Falling Bulk Solid Streams
Rheina-Wolbeck, G. / Hoflinger, W. / American Institute of Chemical Engineers | 2006
Dispersion of Flame-Synthesized Silica Nanoparticles in an Aqueous Solution
Wengeler, R. / Vetter, M. / Teleki, A. / Pratsinis, S. E. / Nirschl, H. / American Institute of Chemical Engineers | 2006
Gas Dispersion of Ultrafine Powders
Ranade, M. B. A. / Tedeschi, S. T. / Powers, K. / El Shaal, H. / American Institute of Chemical Engineers | 2006
Specific Effects of the Multivalent Cations on Friction between Silica Surfaces in Electrolyte Solutions
Donose, B. C. / Vakarelski, I. U. / Higashitani, K. / American Institute of Chemical Engineers | 2006
Digital Particle Image Velocimetry in Flow Measurements
Irena Sielamowicz, V. / Kowalewski, T. A. / American Institute of Chemical Engineers | 2006
The Influence of a Cone-in-Cone Insert on Flow Pattern and Wall Pressure in a Full Scale Silo
Haertl, J. / Ooi, J. Y. / Rotter, J. M. / Wojcik, M. / Ding, S. / Enstad, G. G. / American Institute of Chemical Engineers | 2006
Segregation in Polydisperse Fluidized Beds:Validation of a Multi-Fluid Model
Fan, R. / Fox, R. O. / American Institute of Chemical Engineers | 2006
Model for Assessing Sensitivity of Biologics to Fluid Forces during Formulation and Filling
Geer, D. J. / Keung, A. / Ford, K. J. / Shi, L. / Shelukar, S. D. / Hunke, W. A. / Reynolds, S. D. / American Institute of Chemical Engineers | 2006
Multi-Scale Structure of Clustering Particles
Tsuji, T. / Ito, A. / Tanaka, T. / American Institute of Chemical Engineers | 2006
Application of Surfactants as Selectivity Enhancing Agents in Chemical Mechanical Polishing
Bu, K.-H. / Moudgil, B. / American Institute of Chemical Engineers | 2006
High Selectivity Microporous Silica Membranes for Lactic Acid Dehydration
Duke, M. C. / Lim, A. / da Costa, J. C. D. / Nielsen, L. K. / American Institute of Chemical Engineers | 2006
In-Line Measurement of Nano Particles Using Electroacoustic Spectroscopy Combined with Zeta Potential and Tomographic Techniques for High Concentration Paticle Suspension Systems
Liu, L. / Wang, X. Z. / Williams, R. A. / Tweedie, R. / Primrose, K. / American Institute of Chemical Engineers | 2006
Development of an Integrated Methodology to Evaluate Permeability Based on Measured Microstructures
Selomulya, C. / Tran, T. M. / Jia, X. / Williams, R. / American Institute of Chemical Engineers | 2006
A numerical Simulation Tool describing Particulate Depositions, Regeneration and Deposit Rearrangement Effects in Gas Filter Systems
Deuschle, T. / Janoske, U. / Piesche, M. / American Institute of Chemical Engineers | 2006
Use of Video Enhanced Microscopy for Characterization of Solid-Liquid-Liquid Mixtures
Morales, C. / Padron, A. / Zuniga, P. / Sorrentino, J. A. / American Institute of Chemical Engineers | 2006
Experimental Study of Wet Granulation in Fluidized Bed: Impact of the Binder Properties on the Granule Morphology
Rajniak, P. / Stepanek, F. / Mancinelli, C. / Chern, R. / Farber, L. / Hill, B. / American Institute of Chemical Engineers | 2006
Fluidization - Fundamentals and Applications
Werther, J. / American Institute of Chemical Engineers | 2006
Colloidal Crystals of Polystyrene with High Surface Charge in Dilute Aqueous Suspension
Liu, R. / Cao, L. I. / Dong, P. / Chen, S. / American Institute of Chemical Engineers | 2006
Synthesis of Magnesium Hydroxide and Oxide Nanoparticles Using a High-Gravity Technique
Tai, C. Y. / Chang, M.-H. / Tai, C.-T. / Hsu, H.-P. / American Institute of Chemical Engineers | 2006
Physico-Chemical Limitations during the Electrokinetic Treatment of a Polluted Soil
Fernandez, A. / Hlavackova, P. / Pomes, V. / Sardin, M. / American Institute of Chemical Engineers | 2006
Experimental investigation and mathematical modelling of evolution of the axial non homogeneity of mixtures in static mixers
Ponomarev, D. / Mizonov, V. / Gatumel, C. / Berthiaux, H. / American Institute of Chemical Engineers | 2006
Direct deposition of airborne V~2O~5/TiO~2 on ceramic foams for phthalic anhydride catalysis
Schimmoller, B. / Schulz, H. / Pratsinis, S. E. / Bareiss, A. / Reitzmann, A. / Kraushaar-Czarnetzki, B. / American Institute of Chemical Engineers | 2006
Coating Metals on the Cenosphere by Magnetron Sputtering Method
Xu, Z. / Yu, X. / Shen, Z. / American Institute of Chemical Engineers | 2006
A Finite Element Study of the Time Dependent 3-D Axisymmetric Sessile Droplet Evaporation Dynamics: the Fluid Flow Application for Particles Deposition
Widjaja, E. / Harris, M. T. / American Institute of Chemical Engineers | 2006
Numerical modelling of the hydrodynamics of a gas-solid two-phase mixture flowing through a packed bed
Ding, Y. / American Institute of Chemical Engineers | 2006
Fluidization Characteristics, Solids Distributions and Gas Mixing of a Carbon Nanotube Agglomerate Fluidized Bed
Yu, H. / Zhang, Q. / Gu, G. / Wang, Y. / Luo, G. / Wei, F. / American Institute of Chemical Engineers | 2006
Agitation and Mixing in Vibrated Beds
Ford, K. J. / Gilchrist, J. F. / Caram, H. S. / American Institute of Chemical Engineers | 2006
Particle Strength in Fluidised Bed Granulation
American Institute of Chemical Engineers | 2006
Research on the Sorption of Cadmium(II) Ion on Calcareous Phosphorite
American Institute of Chemical Engineers | 2006
Measuring Slurry Quality and Stability of Pyrogenic Silica Suspensions Using Photon Correlation Techniques
Katzel, U. / Stintz, M. / Barthel, H. / Gottschalk-Gaudig, T. / American Institute of Chemical Engineers | 2006
Numerical Calculation of Van Der Waals Adhesion Force Distributions of Non-Spherical Particles
Bach, B. / Sonnenberg, J.-P. / Schmidt, E. / American Institute of Chemical Engineers | 2006
Experimental and Computational Assessment of Particulate Drag Models
Tortora, P. R. / O Hern, T. J. / Williams, K. A. / Snider, D. M. / American Institute of Chemical Engineers | 2006
Prediction of Vdw Force Interaction between Particles with Surface Roughness
Pu, Y. / Cooney, C. / Oritz, C. / American Institute of Chemical Engineers | 2006
Titanium Dioxide-Carbon Nanostructure Composites for Enhanced Photocatalysis
Krishna, V. / Zhao, J. / Pyrgiotakis, G. / Sigmund, W. / Koopman, B. / Moudgil, B. / American Institute of Chemical Engineers | 2006
- Nanoparticle Sizing - Advances through New Technology
Freud, P. / Trainer, M. / American Institute of Chemical Engineers | 2006
Impact of particles characteristics and mixing conditions on wheat flour agglomeration behaviour
Cuq, B. / Dandrieu, L. E. / Cassan, D. / Morel, M. H. / American Institute of Chemical Engineers | 2006
Single Droplet Drying: Transition from the Effective Diffusion Model to a Modified Receding Interface Model
Werner, S. R. L. / Jones, J. R. / Bronlund, J. E. / Paterson, A. H. J. / American Institute of Chemical Engineers | 2006
Studying the Pulverization Mechanism of Low Density Cross-Linked Natural Rubber
Arastoopour, H. / Eskandari, M. / Schieber, J. D. / American Institute of Chemical Engineers | 2006
Stick-Slip Mechanism in Powder Flow
Verwijs, M. / Svoronos, S. / Johanson, K. / American Institute of Chemical Engineers | 2006
Convergence Control and Convergence Improvement in Lagrangian Predictions of Particulate Two-Phase Flows
Horn, M. / Schmid, H.-J. / American Institute of Chemical Engineers | 2006
Energy Distribution in the Squeezing of Particles in Concentrated Suspension
Estelle, P. / Melinge, Y. / Lanos, C. / Perrot, A. / American Institute of Chemical Engineers | 2006
Case Study of Particle Technology Application in Automotive Industry
Park, A.-H. / Fan, L.-S. / American Institute of Chemical Engineers | 2006
A Basic Investigation to Pneumatic Conveyance of Solid Particles in Pipes
Rizk, F. / American Institute of Chemical Engineers | 2006
Saltation length and velocity of granules in air flow
Rabinovich, E. / Weiss, Y. / Kalman, H. / American Institute of Chemical Engineers | 2006
Operating parameters of a continuous sono-chemical precipitation reactor
Banert, T. / Brenner, G. / Peuker, U. A. / American Institute of Chemical Engineers | 2006
Characterising the Pulsatile Structure of the Gas Flow in Fluidised Dense Phase Pneumatic Conveying of Cement Meal
Williams, K. C. / Jones, M. G. / Tan, S. / American Institute of Chemical Engineers | 2006
On the Numerical Calibration of Discrete Element Models for the Simulation of Bulk Solids
Groger, T. / Katterfeld, A. / American Institute of Chemical Engineers | 2006
Why Does the World Need a True Triaxial Tester?
Janssen, R. J. M. / Verwijs, M. / American Institute of Chemical Engineers | 2006
The Effect of Hydrophobic Surface Modification on Bulk Cohesive Strength
Johanson, K. / Rabinovich, Y. / Miller, J. D. / Lin, C. L. / American Institute of Chemical Engineers | 2006
Flow behaviour of ultrafine cohesive powder: a 3D-"view" from inside
Tykhoniuk, R. / Tomas, J. / Luding, S. / Kappl, M. / Heim, L. / Butt, H.-J. / American Institute of Chemical Engineers | 2006
Estimation of Specific Rate of Grinding to Optimize the Industrial Batch Ball Mill
Sundaresan, S. / Pitchumani, R. / Pitchumani, B. / American Institute of Chemical Engineers | 2006
The Flow Field in the Mill - a Key Factor for the Prediction of the Comminution Result
Toneva, P. / Peukert, W. / Wirth, K.-E. / Epple, P. / Breuer, M. / American Institute of Chemical Engineers | 2006
Imaging Based Size, Gradation and Shape Characterizations of Aggregate Particles Used in Road Pavements
Tutumluer, E. / Pan, T. / American Institute of Chemical Engineers | 2006
Stochastic Calculation of Collision Kernels for Brownian Coagulation in Dense Systems
Trzeciak, T. M. / Podgorski, A. / Marijnissen, J. C. M. / American Institute of Chemical Engineers | 2006
Simulation of Pattern Formation in a Rotating Suspension of non-Brownian Settling Particles
Pan, T.-W. / Glowinski, R. / American Institute of Chemical Engineers | 2006
Transition between "Clusters" and "Stratified" Flow Regimes in the Pneumatic Conveying System - Gas Flow Driven Granular Jump
Jaworski, A. / Dyakowski, T. / Doby, M. / American Institute of Chemical Engineers | 2006
In-Situ Saxs Measurement of Sio~2 Nanoparticle Growth in Diffusion Flames
Camenzind, A. / Teleki, A. / Schulz, H. / Theyencheri, N. / Beaucage, G. / Pratsinis, S. E. / American Institute of Chemical Engineers | 2006
Polydispersity of Primary Particles in Agglomerates Made by Coagulation and Sintering
Heine, M. C. / Pratsinis, S. E. / American Institute of Chemical Engineers | 2006
Electrostatic Screen for Transport of Martian and Lunar Regolith
Immer, C. / Calle, C. I. / Michalenko, M. M. / Starnes, J. / Ritz, M. / American Institute of Chemical Engineers | 2006
On-the-Fly Length Classification of Carbon Nanotube Aerosols and the Kinetics of Growth
Kim, S. / Zachariah, M. / American Institute of Chemical Engineers | 2006
The Interaction between Small Clusters of Cohesive Particles and Laminar Flow: Coupled Dem/Cfd Approach
Grof, Z. / Cook, J. / Lawrence, C. J. / Stepanek, F. / American Institute of Chemical Engineers | 2006
Particle Tracking Techniques and Their Applications
Weeks, E. R. / American Institute of Chemical Engineers | 2006
The Effect of Glow-Discharge Plasma and Muffle Furnace Heating on the Surface Chemistry of Kaolinite
Waters, K. E. / Greenwood, R. W. / Rowson, N. A. / Lapcik, L. / Lapcikova, B. / American Institute of Chemical Engineers | 2006
The Effects of Particle Surface Properties and Storage Condition on Powder Flow Properties
Kwek, J. W. / Ng, W. K. / Tan, C. L. / Chow, P. S. / Tan, R. B. H. / American Institute of Chemical Engineers | 2006
Influence of Test Conditions on the Quality of PCS Results
da Graca Rasteiro, M. / Vasquez, A. / American Institute of Chemical Engineers | 2006
Modelling and Measurement of Granule Friability
Rajniak, P. / MacPhail, N. / Fitzpatrick, S. / Sinka, C. / American Institute of Chemical Engineers | 2006
Particle Technology in Europe
Seville, J. P. K. / American Institute of Chemical Engineers | 2006
Recent Advances in Particle Technology: Australia and New Zealand
Davies, C. E. / Jones, J. / Yu, A. / American Institute of Chemical Engineers | 2006
Dem Simulation of the Unconfined Compaction of Fine Powders
Yang, R. Y. / Zou, R. P. / Yu, A. B. / Choi, S. K. / American Institute of Chemical Engineers | 2006
On the Particle Size Scaling and the Behavior of Geomaterials: Experimental and Numerical Findings
Berry, J. K. / Alsaleh, M. I. / Corcoran, P. T. / American Institute of Chemical Engineers | 2006
Dynamical Scaling of Jet-Induced Crater Formation in a Granular Bed
Metzger, P. / Donahue, C. M. / Immer, C. / American Institute of Chemical Engineers | 2006
Carbon-embedded or -supported Pt Nanoparticles Made in Flames
Ernst, F. O. / Buechel, R. / Strobel, R. / Pratsinis, S. E. / American Institute of Chemical Engineers | 2006
Solids Entrainment into Gas, Liquid, and Gas-Liquid Spray Jets in Fluidized Beds
Briens, C. / Berruti, F. / Felli, V. / Chan, E. / American Institute of Chemical Engineers | 2006
Effect of Fluidizing Gas Humidity on Bubble Behaviors in a Gas-Solid Fluidized Bed under Vibrated Conditions
Mawatari, Y. / Kono, H. / Yamamura, M. / Kage, H. / American Institute of Chemical Engineers | 2006
Developing Particle Capabilities for New Applications
Fotou, G. / Oljaca, M. / Kodas, T. / American Institute of Chemical Engineers | 2006
Cascading granular flow in a quasi-two-dimensional rotating drum
Zhang, X. / Yao, Q. / Li, S. Q. / Zhao, X. L. / Liu, G. Q. / American Institute of Chemical Engineers | 2006
Modeling Granular Segregation during Hopper Discharge Via Discrete Element Methods
Ketterhagen, W. R. / Curtis, J. S. / Wassgren, C. R. / American Institute of Chemical Engineers | 2006
Influence of Leaks in Surface Filters on Particulate Emissions
Bach, B. / Schmidt, E. / American Institute of Chemical Engineers | 2006
The rise of bubbles and slugs in gas-fluidized beds using Ultra-fast Magnetic Resonance Imaging
Muller, C. R. / Mantle, M. D. / Sederman, A. J. / Davidson, J. F. / Dennis, J. S. / Fennell, P. S. / Hayhurst, A. N. / Gladden, L. F. / Rees, A. C. / American Institute of Chemical Engineers | 2006
The Onset of Bubbling in High Temperature Fluidized Beds
Girimonte, R. / Formisani, B. / American Institute of Chemical Engineers | 2006
Squeeze Flow Rheometry of Paste and Slurry
Estelle, P. / Lanos, C. / Perrot, A. / Melinge, Y. / American Institute of Chemical Engineers | 2006
Nanostructured Intermetallic Foams
Hunt, E. M. / Pantoya, M. / Jouet, J. / American Institute of Chemical Engineers | 2006
Bridging the Gap: Slurry Behaviour from Coarse to Colloid
Harbottle, D. / Fairweather, M. / Biggs, S. / American Institute of Chemical Engineers | 2006
Rheological Properties of Concentrated Suspensions
Santagata, M. / Geier, D. / American Institute of Chemical Engineers | 2006
Recent Developments in Particle Technology - a View from the Americas
Dhodapkar, S. / Klinzing, G. E. / Sundaresan, S. / American Institute of Chemical Engineers | 2006
Pressure Distribution under Simulated 3d Granular Piles of Monosized Particles
Battye, J.-P. / Xu, B. / Ghadiri, M. / American Institute of Chemical Engineers | 2006
Permeation of Packed Beds Excited by Electric and Hydraulic Gradients
Schaefer, B. / Nirschl, H. / American Institute of Chemical Engineers | 2006
Prediction of Compression-Permeability Characteristics of Solid-Liquid Systems Using Artificial Neural Networks
Jami, M. S. / Iwata, M. / Shiojiri, S. / American Institute of Chemical Engineers | 2006
A New System to Control Electrostatic Charge on Particles in Gas-Solids Pipe Flow
Matsusaka, S. / Oki, M. / Masuda, H. / American Institute of Chemical Engineers | 2006
Tomographic Approach to Granular Gravitational Flow Dynamics Analysis
Romanowski, A. / Grudzien, K. / Williams, R. A. / American Institute of Chemical Engineers | 2006
Characterization of Fluidization Behaviour of Glidant-Added Geldart C Glass Powders
Cami, X. B. / Saleh, K. / Thomas, A. / Guigon, P. / American Institute of Chemical Engineers | 2006
The Importance of Clearance and Bulk Solids Flow Properties in Predicting the Thoughput of a Screw Feeder
Arnold, P. C. / Halford, W. / American Institute of Chemical Engineers | 2006
A New Microtriaxial Tester for the Characterization of Fine Particulate Systems
Abdel-Hadi, A. I. / American Institute of Chemical Engineers | 2006
Continuous Operation of Zig-Zag® Blender for Pharmaceutical Applications
Pernenkil, L. / Chirkot, T. / Cooney, C. L. / American Institute of Chemical Engineers | 2006
The Effect of Particle Shape on Simple Shear Flows
Cleary, P. / American Institute of Chemical Engineers | 2006
The Effect of Particle Shape on Granular Stress
James, B. D. / Curtis, J. S. / American Institute of Chemical Engineers | 2006
Modelling of Continuous Rotating Drum Mixers for Surface Renewal
Hook, B. D. / American Institute of Chemical Engineers | 2006
A Population Balance Model for Flocculation of Colloidal Suspensions Incorporating the Influence of Surface Forces
Somasundaran, P. / Runkana, V. / Kapur, P. C. / American Institute of Chemical Engineers | 2006
The Influence of Particle Size Distribution on the Performance of Ceramic Particulate Suspensions
da Graca Rasteiro, M. / Jorge, A. / American Institute of Chemical Engineers | 2006
Synthesis of Flexible Magnetic Nanowires of Permanently-Linked Core-Shell Magnetic Beads Tethered to a Glass Surface Patterned by Microcontact Printing
Singh, H. / Laibinis, P. E. / Hatton, T. A. / American Institute of Chemical Engineers | 2006
Fine Particle Flow - from a Discrete Element Perspective
Li, Q. / Rudolph, V. / American Institute of Chemical Engineers | 2006
Dispersion of High Aspect Ratio Particles in Air
Tedeschi, S. T. / Powers, K. / Ranade, M. B. A. / El-Shall, H. / American Institute of Chemical Engineers | 2006
Simulation of the Hydrodynamic Behaviour of Aggregated Particles
Schmid, H.-J. / Binder, C. / Thurey, N. / Peukert, W. / American Institute of Chemical Engineers | 2006
Surface Modification of Silica Particles by Dry-Coating
Ouabbas, Y. / Baron, M. / Galet, L. / Chamayou, A. / Thomas, G. / Grosseau, P. / Guilhot, B. / American Institute of Chemical Engineers | 2006
Amine Group (-Nh2) Functionalized Magnetic Nanoparticles by Pulsed Plasma Polymerization
Zhao, Q. / Wu, J. / American Institute of Chemical Engineers | 2006
Filtration + Magnetic Field = Nanoseparation
Fuchs, B. / Stolarski, M. / Keller, K. / Nirschl, H. / Stahl, W. / American Institute of Chemical Engineers | 2006
Synthesis of Metal Nanoparticles inside a Porous Support in Fluidized Bed: Application to Supported Catalysts
Barthe, L. / Hemati, M. / Desportes, S. / Philippot, K. / Chaudret, B. / American Institute of Chemical Engineers | 2006
In-Situ Process Monitoring for Plasma Synthesis of Alumina Nanoparticles
Shin, J.-W. / Miyazoe, H. / Leparoux, M. / Siegmann, S. / Dorier, J.-L. / Hollenstein, C. / American Institute of Chemical Engineers | 2006
Psd by Laser Diffraction Spectrometry: Application to Cementitious Powders
Ferraris, C. F. / Bullard, J. W. / Hackley, V. A. / American Institute of Chemical Engineers | 2006
Remote Monitoring of Slug Sequence and Flow Stability in Dense-Phase Pneumatic Conveying
Fuchs, A. / Wypych, P. W. / Hastie, D. B. / Frew, I. / American Institute of Chemical Engineers | 2006
Carbon Black / Pp Inter-Penetration Network Thermal-Conducting Composites
Lai, M.-B. / Gai, G.-S. / Hao, X.-Y. / American Institute of Chemical Engineers | 2006
The Evolution of Internal Architecture in Particles Produced by Evaporation-Induced Self Assembly within Aerosols
Ward, T. L. / Rathod, S. B. / American Institute of Chemical Engineers | 2006
Agglomeration in the Spray Zone of a Spray Drier
Williams, A. M. / Jones, J. R. / Peterson, A. H. J. / Pearce, D. / American Institute of Chemical Engineers | 2006
The Electrostatic Force between a Partially Charged Dielectric Particle and a Conducting Plane
Matsuyama, T. / Yamamoto, H. / American Institute of Chemical Engineers | 2006
Modelling of the Boundary Layer in Turbulent Two-Phase-Flows
Horn, M. / Schmid, H.-J. / American Institute of Chemical Engineers | 2006
Activated and Deactivated Sintering of Hydroxyapatite Sorbent Using Metallic Additives
Nzihou, A. / Adhikari, B. P. / Verwilghen, C. / Santander, R. / Pfeffer, R. / American Institute of Chemical Engineers | 2006
Laboratory Experiments in Particle Technology
Pitchumani, B. / American Institute of Chemical Engineers | 2006
The effect of wetting conditions on wet drum granulation kinetics
Gluba, T. / American Institute of Chemical Engineers | 2006
Milling of Organic Solids
Ding, Y. / Kwan, C. C. / Ghadiri, M. / Diemer, R. B. / American Institute of Chemical Engineers | 2006
Study of the Preparation of Ultrafine High Aspect Ratio Wollastonite Powders
Xinhai, L. / American Institute of Chemical Engineers | 2006
Crystallization and Agglomeration for Coating of Energetic Materials
Kim, K. J. / Koo, K.-K. / Kim, H. S. / American Institute of Chemical Engineers | 2006
Scaling-up of Ceramic Body Grinding with Reference to Grinding Rate
Olejnik, T. P. / Heim, A. / American Institute of Chemical Engineers | 2006
Numerical and Experimental Investigation of a Countercurrent Staged Fluidized Bed
Kuo, H.-P. / Cheng, C.-Y. / Zhang, H.-Z. / American Institute of Chemical Engineers | 2006
Control of Electrostatic Discharge by Using Feedback Control Type Ionizer for Powder Handling Process
Mogami, T. / Suzuki, T. / Choi, K.-S. / Kodama, T. / Watano, S. / American Institute of Chemical Engineers | 2006
Tailoring Particle Mixtures for Fluidized Bed Reactors Using High-Throughput Experimentation
Van Ommen, J. R. / Nijenhuis, J. / American Institute of Chemical Engineers | 2006
Design of Washable Bag Houses for Fines Collection in Milk Powder Plants
Gabites, J. / Abrahamson, J. / Winchester, J. / American Institute of Chemical Engineers | 2006
Basic Investigations on Fugitive Dust Emissions Caused by Free Falling Bulk Solids
Rheina-Wolbeck, G. / Hoflinger, W. / American Institute of Chemical Engineers | 2006
Study on the Diffraction Model of Flaky Grain
Ren, z. / Ji, y. / Yao, J. / Zhao, y. / American Institute of Chemical Engineers | 2006
The Effect of Ultrasound on Crystallisation-Precipitation Processes
Dodds, J. / Espitalier, F. / Louisnard, O. / David, R. / Grossier, R. / Hassoun, M. / Gatumel, C. / Lyczko, N. / American Institute of Chemical Engineers | 2006
Modelling the Ram Extrusion Force of a Frictional Plastic Material
Perrot, A. / Melinge, Y. / Estelle, P. / Lanos, C. / American Institute of Chemical Engineers | 2006
Numerical Modeling of Filling and Discharge Processes in Hoppers of Different Shapes
Sielamowicz, I. / Mroz, Z. / Balevicius, R. / Kacianauskas, R. / American Institute of Chemical Engineers | 2006
Mechanic Waves in Sand, 3d Simulations
Mouraille, O. / Luding, S. / American Institute of Chemical Engineers | 2006
Modeling of the Hydrodynamics of Gas-Solid Flows by Improved Finite Volume Based Finite Element Method
Moraveji, M. K. / Famili, M. H. N. / American Institute of Chemical Engineers | 2006
Particle Science and Technology Education and Research at IIT Madras: A Synergistic Approach
Nagarajan, R. / Ramanathan, S. / American Institute of Chemical Engineers | 2006
Swedish Industrial Association for Multiphase Flows - Bringing Together Industry and Academia
Van Wachem, B. / Niklasson-Bjorn, I. / American Institute of Chemical Engineers | 2006
Exploiting Self Assembly and Phase Separation to Produce Multiscale Porous Architectures in Particles Made by Aerosol Routes
Rathod, S. B. / Ward, T. L. / American Institute of Chemical Engineers | 2006
Modelling Solids Friction Factor for Dense-Phase Pneumatic Conveying of Powders
Wypych, P. W. / Hastie, D. B. / American Institute of Chemical Engineers | 2006
Production of water-rich powder by assembling hydrophobic silica nanoparticles
Pezron, I. / Forny, L. / Saleh, K. / Guigon, P. / Komunjer, L. / American Institute of Chemical Engineers | 2006
Recent Developments in Pneumatic Conveying at the Universidad Tecnica Federico Santa Maria
Cabrejos, F. J. / American Institute of Chemical Engineers | 2006
Novel Particles for Electronic Applications
American Institute of Chemical Engineers | 2006
Dynamic Mechanical Properties of Partially Saturated Granules
Litster, J. D. / Smith, R. M. / Page, N. / American Institute of Chemical Engineers | 2006
Mixing of Granular Materials in Non-Circular Geometries
Prasad, D. V. N. / Khakhar, D. V. / American Institute of Chemical Engineers | 2006
Continuous mixing of pharmaceutical powder mixtures
Berthiaux, H. / Marikh, K. / Gatumel, C. / Gautier, R. / American Institute of Chemical Engineers | 2006
Simulations of Spouted Bed Dynamics in the Context of Coating Nuclear Fuel Particles
Pannala, S. / Boyalakuntla, D. / Finney, C. E. A. / Daw, C. S. / American Institute of Chemical Engineers | 2006
Methods for the Adjustment of an Experimental Psd to a Reference Model and Its Verification
Stintz, M. / American Institute of Chemical Engineers | 2006
Caking: Predicting the Bulk Strength of Granular Materials
Specht, D. / Svoronos, S. / Johanson, K. / American Institute of Chemical Engineers | 2006
Comparison of Different Hydrocyclone Arrangements for the Cleaning of Contaminated Soil
Schwier, D. / Pogodda, M. / Reimers, C. / Hartge, E.-U. / Gruhn, G. / Werther, J. / American Institute of Chemical Engineers | 2006
A Discrete-Continuous Population Balance Approach for the Nanoparticle Precipitation in Microemulsions
Niemann, B. / Sundmacher, K. / American Institute of Chemical Engineers | 2006
Effect of Fines and Material Micro-hardness on Unconfined Yield Strength of Powders
Medhe, M. / Pitchumani, B. / American Institute of Chemical Engineers | 2006
Characterization of Liquid Nanoparticle Dispersions by Multisample Analytical Centrifugation - Particle Interaction - Colloidal Crystallization
Sobisch, T. / Lerche, D. / American Institute of Chemical Engineers | 2006
Novel Micro and Nano Fabrication Technology Based on Self-Organization for Biomaterials and Nano-Particles
tanaka, M. / Yamamoto, S. / Shimomura, M. / American Institute of Chemical Engineers | 2006
Experimental Verification of Drag Laws for Binary, Gas-Fluidized Systems
Joseph, G. G. / Leboreiro, J. / Hrenya, C. M. / Lehr, M. D. / Woods, H. R. / Banerjee, S. S. / Snider, D. M. / American Institute of Chemical Engineers | 2006
Breakage of Needle Shaped Crystals under Compaction
Grof, Z. / Kohout, M. / Stepanek, F. / American Institute of Chemical Engineers | 2006
Size Distribution Dynamics of Fuel-Borne Catalytic Ceria Nanoparticles
Konstandopoulos, A. G. / Kostoglou, M. / Burtscher, H. / American Institute of Chemical Engineers | 2006
Nanostructured Catalysts for Diesel Soot Combustion
Fino, D. / Russo, N. / Saracco, G. / Specchia, V. / American Institute of Chemical Engineers | 2006
The Effect of Supersaturation on Supercritical Fluid Antisolvent Precipitation of Particles
Tallon, S. J. / American Institute of Chemical Engineers | 2006
Scaling Effect in Dem Simulations of Direct Shear Test
Ji, S. / Shen, H. H. / Orlando, A. / American Institute of Chemical Engineers | 2006
Investigation of Chemical Hydrophobisation Treatment of Solid Particles Surfaces in Organic Phase and Fluidized Bed
Lazghab, M. / Saleh, K. / Guigon, P. / American Institute of Chemical Engineers | 2006
Fluidization of Coated Cohesive Powders
Chen, Y. / Yang, J. / Dave, R. / Pfeffer, R. / American Institute of Chemical Engineers | 2006
Determining Particle Size Distribution of Non-Spheres from Chord Length Measurements
Wilkinson, D. / Li, M. / Patchigolla, K. / American Institute of Chemical Engineers | 2006
Effects of Filter Aid on Filtration of Super-Compactible Materials
Li, W. / Kiser, C. / Richard, Q. / American Institute of Chemical Engineers | 2006
Sedimentation Acceleration of Remanent Iron Oxide by Magnetic Flocculation
Stolarski, M. / Fuchs, B. C. / Eichholz, C. / Nirschl, H. / Keller, K. / American Institute of Chemical Engineers | 2006
Systems Approach to Solution of Caking Problems
Gopinathan, N. / Johanson, K. D. / Lin, C. L. / Miller, J. D. / American Institute of Chemical Engineers | 2006
Hydrodynamics and Flow Development in Two Circulating Fluidized Bed Risers Using Fcc and Sand Particles
Qi, X.-B. / Zhu, J. / Huang, W. / American Institute of Chemical Engineers | 2006
A Method to Calculate Aerodynamic Diameter of Particles with Fractal Surface
Tang, P. / Chan, H.-K. / Raper, J. A. / American Institute of Chemical Engineers | 2006
Development of Nano- and Micro- Particles
American Institute of Chemical Engineers | 2006
Preparation and Characterization of Ceramic Gas Filters from Waste Fly Ash
Jo, Y. M. / Raper, J. A. / Lee, K. M. / American Institute of Chemical Engineers | 2006
Synthesis of functional nano-composite particles for bio-separation
Banert, T. / Peuker, U. A. / American Institute of Chemical Engineers | 2006
Influence of Shape, Surface Treatment and Mechanical Stretch on Amorphous Silica Nanoparticle Toxicity
Brown, S. C. / Kamal, M. / Nasreen, N. / Antony, V. B. / Moudgil, B. M. / American Institute of Chemical Engineers | 2006
Granular temperature in a gas fluidised bed
Biggs, M. J. / Xie, L. / Glass, D. / Zivkovic, V. / Koenders, M. A. / American Institute of Chemical Engineers | 2006
Theory and Practice of Dust Collector Protection
Going, J. E. / Lombardo, T. / American Institute of Chemical Engineers | 2006
Prevention of Dryer Fires: Problem Analysis & Application of Results
Ergun, E. / Senecal, J. / American Institute of Chemical Engineers | 2006
Challenges in Processing of Aluminum and Metal Oxide Nanopowders in Water
Puszynski, J. A. / Swiatkiewicz, J. J. / Bulian, C. J. / Bichay, M. M. / American Institute of Chemical Engineers | 2006
Honking and Vibrations during the Discharge of Silos
Wilms, H. / Schneider, H. / American Institute of Chemical Engineers | 2006
Filtration Characteristics of Insoluble and Soluble Colloids
Nabi, R. / Biggs, S. / Poole, C. / Hebditch, D. / Baker, G. / Clark, W. / American Institute of Chemical Engineers | 2006
Environmental Issues of Particulates
American Institute of Chemical Engineers | 2006
Particle Velocity Fluctuations of Cork Particles in the Riser of a CFB
Breault, R. W. / Ludlow, J. C. / Yue, P. C. / Shadle, L. J. / American Institute of Chemical Engineers | 2006
Cleaning Different Kinds of Filter Media for Applications in the Solid-Liquid-Separation
Nirschl, H. / Stahl, S. / American Institute of Chemical Engineers | 2006
Characterization of the Structure of Fractal Aggregates
Gmachowski, L. / American Institute of Chemical Engineers | 2006
Fluorescence and Magnetic Resonance Enabled Silica Nanoparticles for Bio Imaging Applications
Sharma, P. / Dutta, D. / Grant, S. C. / Tan, W. / Walter, G. A. / Santra, S. / Moudgil, B. M. / American Institute of Chemical Engineers | 2006
Brian Scarlett- Myth, Motivator, Mentor, and Man
Davies, R. / American Institute of Chemical Engineers | 2006
Large Scale Dem Computation - Expectations and Recent Results
Tijskens, E. / Ramon, H. / Van Besien, B. / Vandewalle, S. / American Institute of Chemical Engineers | 2006
Verified Discrete Element Simulations of Bulk Solids Handling Equipment
Katterfeld, A. / Groger, T. / American Institute of Chemical Engineers | 2006
A Computational Study of Segregation in Granular Material during Heaping
Christakis, N. / Chapelle, P. / Patel, M. K. / American Institute of Chemical Engineers | 2006
Spinning Wheel Powder Feeding Device - Fundamentals and Applications
Francis, T. M. / King, D. M. / Gump, C. / Weimer, A. W. / American Institute of Chemical Engineers | 2006
Experimental Study and Modelling of the Effect of Wetting Properties on the Growth Rate and the Efficiency in Fluidised-Bed Coating Process
Saleh, K. / Guigon, P. / American Institute of Chemical Engineers | 2006
On the Consequences of Non-First-Order Breakage Kinetics in Comminution Processes: Absence of Self-Similar Size Spectra
Bilgili, E. / American Institute of Chemical Engineers | 2006
Predicting Flow Behavior of Solids after Fifty Years Storage Using Sampling and Flowability Studies
Pittenger, B. / Griffin, M. / American Institute of Chemical Engineers | 2006
A Study on the Conductivity of the Particles-Solvent Suspensions
Yang, L. / Zhou, Z. / American Institute of Chemical Engineers | 2006
A New Polydisperse Drag Law Derived from Lattice Boltzmann Simulations
Beetstra, R. / Van der Hoef, M. A. / Kuipers, J. A. M. / American Institute of Chemical Engineers | 2006
Studies on Ionic Mass Transfer in Circular Tubes with Tangential Entry of Fluid through Curved Nozzles
Rajendra Prasad, P. / Sangita, S. R. / Sujatha, V. / Asha, I. R. C. / Guntuku, A. / American Institute of Chemical Engineers | 2006
Investigating the Effect of Pipe Diameter Contraction on the Breakage of Whey Protein Aggregates Using Cfd
Zumaeta, N. / Byrne, E. P. / Fitzpatrick, J. J. / American Institute of Chemical Engineers | 2006
Electrical Capacitance Tomography - the State of the Art
Dyakowski, T. / Wang, H. / Yang, W. / Liu, S. / American Institute of Chemical Engineers | 2006
Analysis of Methods for Description of Yeast Cell Morphology
Solecki, M. / American Institute of Chemical Engineers | 2006
Agglomerates - Structures and Their Dissolution Behaviour
Jia, X. / Williams, R. A. / American Institute of Chemical Engineers | 2006
Improvement of Bioavailability of Poorly Water-Soluble Drugs: Prediction of Theoretical Intrinsic Bioavailability
Choi, W. S. / Seong, M. J. / Cha, B. J. / Kim, J. / Choi, S.-H. / American Institute of Chemical Engineers | 2006
Simulation of Aerosol Synthesis by Simultaneous Coagulation, Sintering and Growth: Structure and Product Property Formation
Schmid, H.-J. / American Institute of Chemical Engineers | 2006
Particle Size Distribution of Water Treatment Plant Residuals
Basim, S. C. / Raghu, D. / American Institute of Chemical Engineers | 2006
Application of the Theory of Markov Chains to Model Non-Linear Phenomena in Comminution
Mizonov, V. / Berthiaux, H. / Zhukov, V. / American Institute of Chemical Engineers | 2006
A Granulation Process for Producing Spherical Particles of a Rubber Antioxidant in a Water Cooling Tower
Li, X. / Wang, T.-J. / Jin, Y. / American Institute of Chemical Engineers | 2006
Shape and size of polymorphic L-Glutamate crystals by batch cooling crystallisation
patchigolla, K. / Wilkinson, D. / Li, M. / American Institute of Chemical Engineers | 2006
Probing of the Microstructural Evolution of Nano-Powder Compacts Using High Resolution X-Ray Microtomography
Tuzun, U. / Gundogdu, O. / Jenneson, P. M. / Morton, E. J. / American Institute of Chemical Engineers | 2006
A Direct, Simple and One-step Synthesis for Tetra methyl ammonium tetra chloro (pyridine)- (triphenylphosphine)-flouro rheniumate (IV)
Garmaroudi, B. S. / Ghammami, S. / Farrokhi, A. R. / Mahjoub, A. R. / American Institute of Chemical Engineers | 2006
Modeling and Experimental Analysis of Superheated Steam Granulation
Hampel, R. / Heinrich, S. / Morl, L. / Peglow, M. / American Institute of Chemical Engineers | 2006
Compaction of Pharmaceutical Powders
Toson, S. / Briscoe, B. / Pitt, K. G. / American Institute of Chemical Engineers | 2006
Impact of Solid Flow on a Granular Bed
Wu, S. M. / Zhu, H. P. / Yu, A. B. / Zulli, P. / American Institute of Chemical Engineers | 2006
Influence of Glass Transition on the Adhesion of Skim Milk Powder to a Stainless Steel Surface
Hodnett, M. / Zumaeta, N. / Fitzpatrick, J. J. / American Institute of Chemical Engineers | 2006
Convective and Diffusive Motions of Granular Materials in a Vibrated Bed
Lu, L. S. / Hsiau, S. / American Institute of Chemical Engineers | 2006
A Novel Multi-Dimensional Population Balance Model Incorporating Particle Size Enlargement and Drying Behavior for Fluidized Bed Spray Granulation
Peglow, M. / Kumar, J. / Heinrich, S. / Tsotsas, E. / Warnecke, G. / Morl, L. / American Institute of Chemical Engineers | 2006
Effects of Secondary Gas Injection on a Bubbling Fluidized Bed
Christensen, D. O. / Nijenhuis, J. / Van Ommen, J. R. / Coppens, M.-O. / American Institute of Chemical Engineers | 2006
Numerical Simulations of Sedimentation Behaviour of Microparticles in Suspensions
Yang, C.-Y. / Ding, Y. / York, D. / Broeckx, W. / American Institute of Chemical Engineers | 2006
Micro-Level Validation of Discrete Element Simulations with Experiments: a Focus on Force Propagation
Muthuswamy, M. D. / Tordesillas, A. / American Institute of Chemical Engineers | 2006
An Investigation of Flow, Compactibility, Sticking Tendency and Content Uniformity of Direct Compression Formulations
Zhang, D. / Geers, S. / Ellison, M. / Liu, Z. / Li, F. / Ney, J. / Shi, G. / Karaborni, S. / American Institute of Chemical Engineers | 2006
Visualization of Polymorphic Crystallization in Working Reactor Using in-Process Diffraction Tomography
Lai, X. / Roberts, K. J. / Williams, R. A. / Barnes, P. / Jacques, S. S. D. M. / Pile, K. / American Institute of Chemical Engineers | 2006
Hydroxylapatite Particles for Plasma Sprayed Medical Coatings
Damia, C. / Sharrock, P. / American Institute of Chemical Engineers | 2006
Improvement of the Flowability of Cohesive Bulk Solids with Surface Active Agents: Modelling and Influence of the Relative Humidity
Schumann, M. / Hohne, D. / Thummler, S. / Husemann, K. / American Institute of Chemical Engineers | 2006
The Utilization of Nanofluids to Remove Microparticles from Surfaces
Bowers, J. / Ding, Y. / American Institute of Chemical Engineers | 2006
Harmonic Analysis of Mass-Flow Bunkers and Silos with Reference to Thermal Power Plants
Venkatesh, S. / American Institute of Chemical Engineers | 2006
Aerosol Maldi - Mass Spectrometry for Bioaerosol Analysis
Kleefsman, I. / Stowers, M. / Marijnissen, J. C. M. / van Wuijckhuijse, A. L. / Kientz, C. E. / American Institute of Chemical Engineers | 2006
Micromechanics of Particle Adhesion
Tomas, J. / American Institute of Chemical Engineers | 2006
Application of X-Ray Tomograpny to the Description of Single Granules
Barrera-Medrano, D. / Reynolds, G. K. / Salman, A. D. / Hounslow, M. J. / American Institute of Chemical Engineers | 2006
DEM modeling of hopper flows: comparison and validation of models and parameters
Hemph, R. M. / Van Wachem, B. / Almstedt, A.-E. / American Institute of Chemical Engineers | 2006
Flow of dry, fine, non-aerated powders: a continuum-mechanics approach
Tardos, G. I. / American Institute of Chemical Engineers | 2006
Experimental Study and dEm Simulation of Granule Breakage by Impact
Antonyuk, S. / Tomas, J. / Heinrich, S. / Morl, L. / American Institute of Chemical Engineers | 2006
Particle Motion in a Rotating Drum with Gaps in the Side Wall
Liu, X. / Ge, W. / American Institute of Chemical Engineers | 2006
Molecular Dynamics Simulation of Colloidal Nanoparticle Forces
Fichthorn, K. A. / Qin, Y. / American Institute of Chemical Engineers | 2006
Particle-particle interaction in non-aqueous liquids - effect on processing properties
Neubauer, S. / Peuker, U. A. / American Institute of Chemical Engineers | 2006
Three-dimensional shape descriptors and tomographic reconstruction techniques for granular materials
Barrot, D. / Corriveau, J. / Giordano, P. / Mandayam, S. / Sukumaran, B. / American Institute of Chemical Engineers | 2006
Contact Algorithm for Tablet-Shaped Particles and Its Application in Dem Simulation
Song, Y. / Turton, R. / Kayihan, F. / American Institute of Chemical Engineers | 2006
Assembly of Binary Colloidal Particles with Opposite Charge
Liu, R. / Dong, P. / Chen, S. / Cao, L. I. / American Institute of Chemical Engineers | 2006
Effect of Agitation Intensity during the Formation of Whey Protein Aggregates on Breakage Rate under Subsequent Turbulent Flow Transportation
Zumaeta, N. / Byrne, E. P. / Fitzpatrick, J. J. / American Institute of Chemical Engineers | 2006
Numerical Simulations of Flow Patterns in a Moving Granular Filter Bed with an Asymmetric Louvered-Wall and Obstacles
Chou, C.-S. / Lee, A.-F. / American Institute of Chemical Engineers | 2006
Granular Flow through an Orifice - Effect of Granule Size and Shape Distributions
Mort, P. / Behringer, R. / Wambaugh, J. / Mckenzie, K. / American Institute of Chemical Engineers | 2006
The Granulometric Properties of Pyrogenic Silica Suspensions
Katzel, U. / Stintz, M. / Babick, F. / Barthel, H. / Gottschalk-Gaudig, T. / American Institute of Chemical Engineers | 2006
Non-Intrusive Dynamics during Spray Flame Synthesis of Zro~2
Jossen, R. / Heine, M. C. / Beaucage, G. / Narayanan, T. / Pratsinis, S. E. / American Institute of Chemical Engineers | 2006
Round Robin Tests with the Uniaxial Tester to Predict Caking
Weigl, B. / Feise, H. / Pengiran, Y. / Roeck, M. / Janssen, R. J. M. / American Institute of Chemical Engineers | 2006
Solids Friction Power Law Variations and Their Influence on Pressure Losses in Fluidised Dense Phase Pneumatic Conveying
Williams, K. C. / Jones, M. / American Institute of Chemical Engineers | 2006
Calculation of fundamental dense granular flow
Snider, D. / Williams, K. / American Institute of Chemical Engineers | 2006
Heavy Metal Removal from Gas Phase with Hydroxylapatite Sorbent
Verwilghen, C. / Nzihou, A. / Sharrock, P. / Flamant, G. / Gauthier, D. / American Institute of Chemical Engineers | 2006
Assessment of Gel Formation Conditions in Turbulent Jets
Soos, M. / Marchisio, D. L. / Sefcik, J. / Fox, R. O. / Morbidelli, M. / American Institute of Chemical Engineers | 2006
Determination of Colloid Deposition at Particle-Particle Contacts Using X-Ray Microtomography
Li, X. / Lin, C. L. / Miller, J. D. / Johnson, W. P. / American Institute of Chemical Engineers | 2006
The Influence of Binary Drag Laws on MP-PIC Simulations of Segregation
Leboreiro, J. / Joseph, G. G. / Hrenya, C. M. / Snider, D. M. / Banerjee, S. S. / American Institute of Chemical Engineers | 2006
Simulation of the Performance of a Dry Powder Inhaler Using Computational Fluid Dynamics
Coates, M. S. / Chan, H.-K. / Fletcher, D. F. / Raper, J. A. / American Institute of Chemical Engineers | 2006
Simulation of Vibration-Induced Segregation of Equal-Sized Bronze and Glass Spheres
Zeilstra, C. / van der Hoef, M. A. / Kuipers, J. A. M. / American Institute of Chemical Engineers | 2006
Prediction of Optimum Milling Condition and Power Consumption
Kano, J. / Suzuta, Y. / Saito, F. / American Institute of Chemical Engineers | 2006
Preparation of the Novel Pore Structure Catalysts
Xu, K.-Q. / Chen, S.-L. / Dong, P. / American Institute of Chemical Engineers | 2006
Application of Seeding as a Process Actuator in a Model Predictive Control Framework for Fed-Batch Crystallization of Ammonium Sulphate
Kalbasenka, A. N. / Spierings, L. C. P. / Huesman, A. E. M. / Kramer, H. J. M. / American Institute of Chemical Engineers | 2006
Developments in Particle Technology in Middle East and Africa in past 10 Years
Kalman, H. / American Institute of Chemical Engineers | 2006
Characterization of Mechanical Proerties of Soft Micro- and Nanoparticles by Analytical Centrifugation
Lerche, D. / Woehlecke, H. / Lerche, K. / American Institute of Chemical Engineers | 2006
Capping Mechanisms during Pharmaceutical Powder Compaction
Wu, C.-Y. / American Institute of Chemical Engineers | 2006
Instrumented Uniaxial Compaction Experiments on Silicon Nitride Granulates under Varied Climatic Conditions
Klemm, U. / Schone, B. / Nebelung, M. / Fries, M. / American Institute of Chemical Engineers | 2006
Properties of Lunar and Other Regoliths, from Comparisons between Light Scattering Observations and Numerical or Experimental Simulations
Levasseur-Regourd, A. C. / Renard, J.-B. / Lasue, J. / Hadamcik, E. / American Institute of Chemical Engineers | 2006
Continuum Modeling and Discrete Element Simulations of Elastic-Quasi-Static Granular Flow in a Compressing Slot
Helenbrook, B. T. / Powers, M. / Shen, H. H. / Metzger, P. / American Institute of Chemical Engineers | 2006
Evaluation of the Particle-Particle Interactions of the Toner by Colloid Probe Afm
Tanaka, M. / Komagata, M. / Tsukada, M. / Kamiya, H. / American Institute of Chemical Engineers | 2006
On the Adhesion of Nanocontacts: an Atomic Force Microscopy Study
Farshchi-Tabrizi, M. / Kappl, M. / Butt, H.-J. / American Institute of Chemical Engineers | 2006
Particle Size Segregation in Flexible Intermediate Bulk Containers During Filling, Transport, and Discharge
Koch, J. F. / American Institute of Chemical Engineers | 2006
Segregation Model for Percolation Mechanism
Tang, P. / Puri, V. M. / American Institute of Chemical Engineers | 2006
Comparative Adhesion Force Measurements on Conventional and Novel Nanostructured and Highly Porous Filtration Membranes
Mertler, M. / Zimmerlin, B. / Leibold, H. / Seifert, H. / American Institute of Chemical Engineers | 2006
Investigation of Operating Parameters That Affect Coating Uniformity in Pan Coating Devices
Pandey, P. / Turton, R. / American Institute of Chemical Engineers | 2006
Travelling Wave Particle Separation in Fluidic Cell
Lean, M. H. / Lu, J.-P. / Limb, S. J. / Daniel, J. H. / Volkel, A. R. / Hsieh, H. B. / Solberg, S. E. / Preas, B. T. / Gulati, S. / American Institute of Chemical Engineers | 2006
Support Particles for Magnetic Field Enhanced Separations
Friedmann, T. E. / Franzreb, M. / Thomas, O. R. T. / American Institute of Chemical Engineers | 2006
Controlling Bed Solids Inventory and Particle Size Distribution during Fluidized Bed Combustion of Solid Fuels
Cammarota, A. / Chirone, R. / Salatino, P. / Urciuolo, M. / American Institute of Chemical Engineers | 2006
The Adsorption and Reaction of a Titanate Coupling Reagent on the Surfaces of Different Nano-Particles in Supercritical Co2
Wang, Z.-W. / Wang, T.-J. / Jin, Y. / American Institute of Chemical Engineers | 2006
Control Polymorphism, Size and Surface Properties of Particulate Materials
Chi, C. / Green, D. A. / American Institute of Chemical Engineers | 2006
Influence of the Quenching Process on Thermal Plasma Synthesis of Engineered Nanoparticles
Schreuders, C. / Leparoux, M. / Siegmann, S. / American Institute of Chemical Engineers | 2006
Spouting Phenomenon of Powder through a Small Orifice at the Bottom of Vessel Using the Fluidization and Aeration
Ogata, K. / American Institute of Chemical Engineers | 2006
Charaterization of Talc Powders for Therapeutic Particle Design
Brown, S. C. / Kamal, M. / Nasreen, N. / Antony, V. B. / Moudgil, B. M. / American Institute of Chemical Engineers | 2006
Shape of a particle curtain falling in stagnant air
Wardjiman, C. / Rhodes, M. / American Institute of Chemical Engineers | 2006
Laser Diagnostics of Flow Structures and Gas-Mixing Induced by Bubble Bursting at the Surface of Gas-Fluidized Beds
Solimene, R. / Salatino, P. / Marzocchella, A. / Ragucci, R. / American Institute of Chemical Engineers | 2006
Wet Granule Breakage in High Shear Mixer Granulation
Litster, J. D. / Smith, R. M. / Page, N. / American Institute of Chemical Engineers | 2006
Investigation of a Novel Method to Produce Water-Insoluble Microencapsulated Flavor Granules
Bhandari, B. / D Arcy, B. / Begum, S. / American Institute of Chemical Engineers | 2006
Surfactants: Do They Work for Suppression of Dust in Iron Ore Plants?
Kawatara, S. K. / Copeland, C. / American Institute of Chemical Engineers | 2006
On the Ect Sensor Based Dual Imaging Modality System for Electrical Permittivity and Conductivity Measurements
marashdeh, Q. M. / Hadi, M. / Fan, L. S. / Warsito, W. / American Institute of Chemical Engineers | 2006
Multiple-Particle Tracking Using the Birmingham Positron Camera
Yang, Z. / Parker, D. J. / Bakalis, S. / Fan, X. / Seville, J. P. K. / Fryer, P. J. / American Institute of Chemical Engineers | 2006
Recent Developments in Particle Technology - Asian Perspective
Gao, S. / Zhu, Q. / Sun, Q. / Li, J. / Kwauk, M. / American Institute of Chemical Engineers | 2006
Breakage and Attrition of Sintered Agglomerates
Luding, S. / American Institute of Chemical Engineers | 2006
Effect of humidity on pressure-drop and penetration of a membrane filter during loading with charged and neutralized particles
Huang, B. / American Institute of Chemical Engineers | 2006
Bubble Size Reduction in Electric Field Optimised Fluidized Beds: Simulations and Experiments
Van Ommen, J. R. / van Willigen, F. K. / van Turnhout, J. / van den Bleek, C. / American Institute of Chemical Engineers | 2006
The Conductivity
Zhou, N.-Q. / American Institute of Chemical Engineers | 2006
Theoretical and Experimental Studies of the Dynamics of Bubbling and Slugging Fluidised Beds
Haigang, W. / Yang, W. / Dyakowski, T. / Liu, S. / American Institute of Chemical Engineers | 2006
Designing Magnetic Nanoparticles for Bioseparation
Li, D. / Teoh, W. Y. / Selomulya, C. / Amal, R. / American Institute of Chemical Engineers | 2006
Effect of Particle Characteristics on Frictional and Compression Properties of a Particulate by-Product Material
Santagata, M. / Sreekrishnavilasam, A. / American Institute of Chemical Engineers | 2006
The Application of Wavelet Transforms to Many-Body Particle Interactions
Meejun, N. / Skeldon, A. / Tuzun, U. / American Institute of Chemical Engineers | 2006
Numerical Investigation of Unsteady State Hopper
Zhu, H. P. / Yu, A. B. / American Institute of Chemical Engineers | 2006
Controlling the Interparticle Forces of Nanoparticles Using Atomic Layer Deposition
Hakim, L. F. / George, S. M. / Weimer, A. W. / American Institute of Chemical Engineers | 2006
An Investigation into the Effects of Time and Shear Rate on the Spreading of Liquid Binders in a Granular Layering Process
Simmons, T. D. / Turton, R. / Mort, P. / American Institute of Chemical Engineers | 2006
The Development of New Direct Coloring Technique for Powder Coatings
Tsujimoto, H. / Kinoshita, N. / Huang, C. C. / Kondou, A. / Naito, M. / Nogi, K. / American Institute of Chemical Engineers | 2006
Experimental Investigation of Change in Chord Length Distribution Measured by Online Backscattering Technique
Shaikh, A. / Hounslow, M. J. / Salman, A. D. / Littlewood, G. / Mcnamara, S. / American Institute of Chemical Engineers | 2006
Dem-Cfd Modeling of Solid-Fluid Flows
Favier, J. / Golz, P. / American Institute of Chemical Engineers | 2006
Tutorial 1: Flow Properties and Particle Analysis
Seville, J. P. K. / American Institute of Chemical Engineers | 2006
Fine Polycarbosilane Particles for Precursors of Silicon Carbide Ceramics Synthesized by Precipitation Processing in Solvents
Ishihara, S. / Nishimura, T. / Tanaka, H. / American Institute of Chemical Engineers | 2006
Nanoparticle Structural Organisation and Scaffolding in Organic Media
Gundogdu, O. / Roso, M. / Stevens, G. C. / Tuzun, U. / American Institute of Chemical Engineers | 2006
Flushing Phenomenon due to the Impact Force on the Powder Surface by Free Falling of Particles
Tashiro, H. / Ogata, K. / Wakamizu, Y. / Funatsu, K. / Tomita, Y. / American Institute of Chemical Engineers | 2006
Proteus - An efficient computational scheme for the simulation of dense particulate flows
Michaelides, E. E. / Feng, Z.-G. / American Institute of Chemical Engineers | 2006
Rational Design of Granules: the Evolution of Microstructure in Granulation and Its Effect on Dissolution
Ansari, M. A. / Stepanek, F. / American Institute of Chemical Engineers | 2006
Discussion on Clastic Rock Grain Size Distribution Characterization
xiqing, x. / zihui, f. / zuoxiang, z. / weiqin, z. / shuyun, w. / junwen, z. / American Institute of Chemical Engineers | 2006
Analysis of Dehydration Process in Crystallization of Nacl by Molecular Dynamics Simulations
Kadota, K. / Shimosaka, A. / Shirakawa, Y. / Hidaka, J. / American Institute of Chemical Engineers | 2006
Production of a Diluted Solid Tracer by Dry Co-Grinding in a Tumbling Ball Mill
Le Bolay, N. / Zapata-Massot, C. / Barthe, L. / Ahmed, Z. / American Institute of Chemical Engineers | 2006
Production and Characterization of High Aspect Ratio Metal Flakes
Hamey, R. / Powers, K. / Ranade, M. B. A. / El-Shall, H. / American Institute of Chemical Engineers | 2006
Adhesion Strength of Freshly Deposited and Annealed Nanoparticles Layers
Tricoli, A. / Pratsinis, S. E. / American Institute of Chemical Engineers | 2006
Discrete particle simulation of granular flows in silos
Negi, S. C. / Jofriet, J. C. / American Institute of Chemical Engineers | 2006
Gadolinium-Containing Lipid Nanoparticles for Neutron Capture Therapy
Nabeta, C. / Ichikawa, H. / Noguchi, Y. / Fukumori, Y. / American Institute of Chemical Engineers | 2006
Mechanochemical Waste Processing Based on Grinding
Saito, F. / Zhang, Q. / Kano, J. / Inoue, T. / American Institute of Chemical Engineers | 2006
A Model to Predict Radial Solids Concentration and Liquid Velocity Distributions in Liquid-Solid Circulating Fluidized Beds
Natarajan, P. / Velraj, R. / Seeniraj, R. V. / American Institute of Chemical Engineers | 2006
Dem Simulation of Fluidized Bed by Similarity Model (Similarity Conditions from Non-Dimensional Equations)
Washino, K. / Hsu, C.-H. / Kawaguchi, T. / Tsuji, Y. / American Institute of Chemical Engineers | 2006
Guide to Handling Rotary Airlock Leakage in Pneumatic Conveying Systems
Thorn, J. O. / American Institute of Chemical Engineers | 2006
Improved Dissolution Properties of a Poorly Water-Soluble Drug by the Nanosuspension Spray-Coating System
Noguchi, Y. / Ichikawa, H. / Fukumori, Y. / American Institute of Chemical Engineers | 2006
Powder Technology: Interaction between Theoretical, Practical Teaching and Sensory Analysis
Fatah, N. / American Institute of Chemical Engineers | 2006
New Accurate and Multiple-product Classifiers of a High-throughput Centrifugal Classification by Almost Rigidly Rotating Flow
Tsuchida, Y. / Nakabayashi, K. / Suzuki, T. / American Institute of Chemical Engineers | 2006
Drag Correlation for Motion of Drops on Fibers
Chase, G. G. / Dawar, S. / Li, H. / American Institute of Chemical Engineers | 2006
Effect of Moisture Induced Capillary Forces on Flow Properties of Thermal Power Station Coal
Medhe, M. / Pitchumani, B. / American Institute of Chemical Engineers | 2006
Phillipsite Synthesis from Fly Ash Prepared by Hydrothermal Treatment with Microwave Heating
Fukui, K. / Arai, K. / Kanayama, K. / Yoshida, H. / American Institute of Chemical Engineers | 2006
Plane Shear Flow of Cohesive Granular Materials
Sundaresan, S. / Aarons, L. / American Institute of Chemical Engineers | 2006
Granular Fluid Dynamics
Shattuck, M. D. / American Institute of Chemical Engineers | 2006
Finite Element Analysis for Incipient Flow of Bulk Solid in a Diamondback Hopper
Saada, O. S. / Johanson, K. / Cristescu, N. D. / American Institute of Chemical Engineers | 2006
Influence of single particle parameters on bulk behaviour of dense granular assembly
Chung, Y.-C. / Ooi, J. Y. / American Institute of Chemical Engineers | 2006
Study on Frictional Property of Powder for Cosmetics
Misaki, E. / Yokoyama, M. / Kashimoto, A. / American Institute of Chemical Engineers | 2006
Local Behavior of Solid Mixing in Bubbling Fluidized Bed
Kamarudin, S. K. / Tasirin, S. M. / Daud, W. R. W. / Al-Hweage, A.-M. A. / American Institute of Chemical Engineers | 2006
Visualization of Shear Motions of Powders in the True Biaxial Shear Tester
Roeck, M. / Morgeneyer, M. / Schwedes, J. / Brendel, L. / Kadau, D. / Wolf, D. E. / American Institute of Chemical Engineers | 2006
Isothermal Batch Crystallization with C.H. Seeds and Integer Order Kinetics
White, E. T. / Hardin, M. T. / Iswanto, N. / American Institute of Chemical Engineers | 2006
Population Balance Application in Rotating Fluidized Bed Polymerization Reactor
Ahmadzadeh, A. / Arastoopour, H. / Teymour, F. / Strumendo, M. / American Institute of Chemical Engineers | 2006
The Effect of Binder Ratio on Granule Strength, Dissolution and Structure
Gabbott, I. / Barrera-Medrano, D. / Reynolds, G. K. / Hounslow, M. J. / Salman, A. D. / American Institute of Chemical Engineers | 2006
The Engineering of Hollow Nanocrystalline Iron Oxide and Barium Titanate Particles Produced by Aerosol Pyrolysis
Ward, T. L. / Guo, W. / American Institute of Chemical Engineers | 2006
Validation of Cfd Model for Fluidised Bed over Broad Ranges of Operating
Makkawi, Y. / Ocone, R. / American Institute of Chemical Engineers | 2006
Optimum Conveying Conditions for the Pneumatic Conveying of Polyethylene Pellets and Similar Materials
Mills, D. / American Institute of Chemical Engineers | 2006
Discrete Element Simulations of Floor Pressure Due to Granular Material in a Cylindrical Vessel
Chester, S. A. / Rosato, A. D. / Walton, O. R. / American Institute of Chemical Engineers | 2006
A New Measurement System to Evaluate Powder Flowability Based on Vibrating Capillary Method
Matsusaka, S. / Jiang, Y. / Masuda, H. / American Institute of Chemical Engineers | 2006
Shape Descriptors for Particle Characterisation and Classification Using Imaging and Image Analysis
De Anda, J. C. / Wang, X. Z. / Crompton, C. / Prior, A. / Tweedie, R. / American Institute of Chemical Engineers | 2006
Sticky point determination in dairy powders using the particle gun technique
Murti, R. A. / Paterson, A. H. J. / Pearce, D. L. / Bronlund, J. E. / American Institute of Chemical Engineers | 2006
Investigation of flow regimes in a spout-fluid bed with a draft tube using pressure fluctuation
Nagashima, H. / Ishikura, T. / Ide, M. / American Institute of Chemical Engineers | 2006
Measurement of Force Curve Due to Electrostatic Charge on a Particle with Atomic Force Microscope
Otsuka, M. / Matsuyama, T. / Yamamoto, H. / American Institute of Chemical Engineers | 2006
Predictive simulation of nanoparticles-precipitation in a T-mixer by coupling direct numerical simulation with population balance equations
Gradl, J. / Peukert, W. / American Institute of Chemical Engineers | 2006
Water Resistance of Nano-Particles Water Repellent
Suzuki, M. / Shiotani, S. / Nakatsuka, H. / Iimura, K. / Hirota, M. / Ishikawa, K. / American Institute of Chemical Engineers | 2006
Preparation of Stable Nano-Dispersions -
Sauter, C. / Pohl, M. / Schuchmann, H. P. / American Institute of Chemical Engineers | 2006
Effect of inorganic surface treatment on the dispersability of TiO2 pigment
Al-Masry, W. A. / Trabzuni, F. M. / American Institute of Chemical Engineers | 2006
Drag Force Model for Fluidized Bed of Binary Mixture of Particles
Okayama, Y. / Doi, A. / Kawaguchi, T. / Tanaka, T. / Tsuji, Y. / American Institute of Chemical Engineers | 2006
A Fluid-Bed Continuous Classifier of Polydisperse Granular Solids
Olivieri, G. / Marzocchella, A. / Salatino, P. / American Institute of Chemical Engineers | 2006
Interpretation of Breakage Data via Moment Models
Diemer, R. B. / Spahr, D. E. / Magan, R. V. / Olson, J. H. / Litster, S. J. / American Institute of Chemical Engineers | 2006
Catalytic performance and carbon deposition behavior of noble metals promoted NiO-MgO solid solution in oxidative steam reforming of methane
Nurunnabi, M. / Fujimoto, K.-I. / Suzuki, K. / Kunimori, K. / Tomishige, K. / American Institute of Chemical Engineers | 2006
Particle Technology Education 2006
Rhodes, M. / American Institute of Chemical Engineers | 2006
A Novel Experimental Study of Temperature Enhanced Cohesive Interparticle Forces
Simons, S. J. R. / Pagliai, P. / Rhodes, D. / American Institute of Chemical Engineers | 2006
Teaching Bulk Solids Handling - Development of Course Material
Bates, L. / American Institute of Chemical Engineers | 2006
Using Aspen Plus Solids-Handling Blocks in Particle Technology Education
Lee-Desautels, R. J. / American Institute of Chemical Engineers | 2006
The Flowability of Fine Powders in Reduced Gravity Conditions
Williams, R. R. / Shao, R. / Overfelt, R. A. / American Institute of Chemical Engineers | 2006
Plasma Coating of Submicron Particles and the Fabrication of Core-Shell Nanostructures for Low-K Elecgtronics
Matsoukas, T. / Li, D. / American Institute of Chemical Engineers | 2006
Individual Nanocoating of Ceramic Nanoparticles Via Atomic Layer Deposition
Hakim, L. F. / George, S. M. / Weimer, A. W. / American Institute of Chemical Engineers | 2006
Adhesion Force of Glass Particle on Silica Surface with Periodic Roughness Structure in Humid Atmosphere
Mori, Y. / Fukunishi, A. / Okamoto, S. / American Institute of Chemical Engineers | 2006
Experimental and numerical estimation on a dynamic liquid bridge force adhered to three spheres
Murase, K. / Mochida, T. / Sagawa, Y. / Sugama, H. / American Institute of Chemical Engineers | 2006
Sticky Behavior of Whey Protein Isolate and Lactose Droplets during Convective Drying
Adhikari, B. P. / Howes, T. / Shrestha, A. / Bhandari, B. / American Institute of Chemical Engineers | 2006
Measurement and Control of High Shear Granulation by Image Processing
Watano, S. / Sato, Y. / Akachi, T. / Iwasaki, T. / Kolzumi, I. / American Institute of Chemical Engineers | 2006
Scale up of Anti-Solvent Crystallization Using in-Line Tools
O Grady, D. / Glennon, B. / American Institute of Chemical Engineers | 2006
Sedimentation of Activated Sludge in Secondary Clarifiers
Weiss, M. / Plosz, B. / Essemiani, K. / Meinhold, J. / American Institute of Chemical Engineers | 2006
Structural Analysis and Dewatering Characteristics of Waste Sludge from WWTP MBR
Chu, C.-P. / Wu, C.-M. / Wu, Y.-S. / Lin, C.-C. / Chung, Y.-J. / American Institute of Chemical Engineers | 2006
Solids Dynamics in Gas-Solid Risers Inferred from Carpt Experiments
Bhusarapu, S. / Cassanello, M. / Dudukovic, M. P. / Al-Dahhan, M. H. / Trujillo, S. M. / O Hern, T. / American Institute of Chemical Engineers | 2006
Carbon Nanotubes Production by Means of Thermal Treatment of Polymers in Fluidized Bed Reactors
Mastellone, M. L. / Arena, U. / American Institute of Chemical Engineers | 2006
MRI Measurement of Particle Velocity Distribution in Hopper Flow
Yabuno, M. / Kawaguchi, T. / Tsuji, Y. / American Institute of Chemical Engineers | 2006
Mri Investigations of Particle Motion within a Three-Dimensional Vibro-Fluidized Granular Bed
Huntley, J. M. / Mantle, M. D. / martin, T. W. / Sederman, A. J. / Shattuck, M. D. / Wildman, R. D. / Gladden, L. F. / American Institute of Chemical Engineers | 2006
Using Unconventional Baffles to Reduce Segregation within Rotating Drums
Shi, D. / McCarthy, J. J. / American Institute of Chemical Engineers | 2006
Fine Particle Classification with Revised Cyclone
Yoshida, H. / American Institute of Chemical Engineers | 2006
Rational Design of Pharmaceutical Formulations Prepared by High Shear Wet Granulation: Introduction & Evaluation of the Solid-Liquid-Interaction Classification
Seiler, C. / Keatings, S. / MacPhail, N. O. / Clarke, A. P. / Fitzpatrick, S. / American Institute of Chemical Engineers | 2006
Multiresolution Analysis of Pressure Fluctuations in a Gas-Solids Fluidized Bed
Wu, B. / Kantzas, A. / Bellehumeur, C. / Kryuchkov, S. / American Institute of Chemical Engineers | 2006
"One-Dimensional" Scale-up of High-Shear Granulators
Michaels, J. N. / Wang, G. / Farber, L. / Hapgood, K. P. / Chou, J.-H. / Heidel, S. / Tardos, G. I. / American Institute of Chemical Engineers | 2006
Development and Design of Handling Technology for Highly Explosible Powders
Wypych, P. W. / American Institute of Chemical Engineers | 2006
Characterization of Powders
Garg, R. / Li, Y. / Pang, M. / American Institute of Chemical Engineers | 2006
Development of Slurry Characterization Method for Tape Casting
Mori, T. / Yamada, T. / Tsubaki, J. / American Institute of Chemical Engineers | 2006
The Effects of Aluminum Particle Size on the Thermal Degradation of Aluminum/Polytetrafluoroethylene Mixtures
Osborne, D. / Pantoya, M. / American Institute of Chemical Engineers | 2006
Electrostatic Charge Generation Due to Shear Deformation of Pharmaceutical Powders
Supuk, E. / Watanabe, H. / Ghadiri, M. / Pitt, K. G. / American Institute of Chemical Engineers | 2006
Electrostatic Charging Phenomenon in Gas-Liquid-Solid Flow Systems
Park, A.-H. / Fan, L.-S. / American Institute of Chemical Engineers | 2006
Maintaining Product Integrity and Operator Safety when Reactive Powders are Involved
Towndrow, P. / American Institute of Chemical Engineers | 2006