2007-01-3332 Swept Wing Icing Physics Studies at NASA Glenn Research Center 1990-2006 (Englisch)

In: JOURNAL OF AEROSPACE   ;  672-687  ;  2008
  • ISSN:
  • Aufsatz (Zeitschrift)  /  Print

Wie erhalte ich diesen Titel?

  • Titel:
    2007-01-3332 Swept Wing Icing Physics Studies at NASA Glenn Research Center 1990-2006
  • Autor / Urheber:
  • Erschienen in:
  • Verlag:
    AMERICAN TECHNICAL PUBLISHERS LTD
  • Erscheinungsjahr:
    2008
  • Format / Umfang:
    16 pages
  • ISSN:
  • Medientyp:
    Aufsatz (Zeitschrift)
  • Format:
    Print
  • Sprache:
    Englisch
  • Klassifikation:
    DDC:    629.2
  • Datenquelle:
  • Exportieren:

Inhaltsverzeichnis – Band 116

Zeige alle Jahrgänge und Ausgaben

Die Inhaltsverzeichnisse werden automatisch erzeugt und basieren auf den im Index des TIB-Portals verfügbaren Einzelnachweisen der enthaltenen Beiträge. Die Anzeige der Inhaltsverzeichnisse kann daher unvollständig oder lückenhaft sein.

1
2007-01-3021 Thermal Testing of the Herschel EPLM STM
Jahn, G. / Langfermann, M. / Wagner, K. / Hohn, R. | 2008
1
Fundamental of Value Benchmarking
Cook, H. E. | 1996
1
2004-01-0019 Advanced Modelling of a New Diesel Fast Solenoid Injector and Comparison with Experiments
Bianchi, G. M. / Falfari, S. / Brusiani, F. / Pelloni, P. / Osbat, G. / Parotto, M. / Lamberti, C. | 2004
1
2004-01-0128 Energy Absorption Capacity for HPDC Components
Dorum, C. / Hopperstad, O. S. / Langseth, M. / Lademo, O.-G. / Sannes, S. | 2004
1
2004-01-1803 Preliminary Design Considerations for Zero Greenhouse Gas Emission Airplanes
Wentz, W. H. / Mohamed, A. S. | 2004
1
Flight Path Control for the Approach and Landing of the Quiet STOL Experimental Aircraft ASKA
Okada, N. | 1994
1
The Application of Fuzzy Logic to the Diagnosis of Automotive Systems
Soliman, A. / Krishnaswami, V. / Rizzoni, G. | 1997
1
2002-01-0006 Modelling the Pollutant Emissions from a S.I. Engine
D Errico, G. / Ferrari, G. / Onorati, A. / Cerri, T. | 2002
1
910066 An Advanced Methodology for Projecting Field Repair Rates and Maintenance Costs for Vehicle Electronic Systems
Derr, J. H. / Louch, R. J. | 1992
1
External Condenser Design for Cooling of Rotating Heat Pipe in MEA Application
Ponnappan, R. / Leland, J. E. | 1999
1
Development of the Variable Valve Timing and Lift (VTEC) Engine for the Honda NSX
Hosaka, T. / Hamazaki, M. | 1992
1
The Effects of Rapeseed Oil Methyl Ester on Diesel Engine Performance, Exhaust Emissions and Long-Term Behavior - A Summary of Three Years of Experimentation
Staat, F. / Gateau, P. | 1996
1
Comparison of Automotive Subwoofer Topologies
Phillips, A. S. | 2000
1
Optimizing Lubricating Oil Filtration Systems for Diesel Engines
Schwandt, B. W. / Verdegan, B. M. / Holm, C. E. / Kelly, S. R. | 1993
1
Practical Experience with the EHC System in the BMW ALPINA B12
Hanel, F. J. / Otto, E. / Brueck, R. / Nagel, T. / Bergau, N. | 1997
1
2007-01-0137 Designing Composite Vehicles Against Blast Attack
Li, G. / Li, Q. / Liu, D. / Raju, B.B. / Templeton, D.W. | 2008
1
Bringing Agricultural Tractor Hydraulics to Life at -30�C.
Macdonald, D. J. | 1994
1
Continuously Variable Accessory Drive System
Yasuhara, S. / Tamagawa, T. / Hasuda, Y. / Johns, T. M. | 1997
1
2006-01-0030 Diesel Emission Control in Review
Johnson, T. V. | 2007
1
Electrogalvanized and Hot Dip Galvanized Strip with Bake Hardening Properties for Automotive Use
Bleck, W. / Bode, R. / Mueschenbom, W. | 1993
1
2005-01-2756 Mars Base Zero-A Terrestrial Analog
Drysdale, A. / Collins, R. | 2005
1
2005-01-0041 A Robust Controller Design for Anti-Jerking
Baumann, J. / Swamakar, A. / Kiencke, U. / Schlegl, T. | 2005
1
2001-01-1693 Rapid Electrochemical Characterization of Corrosion Properties of Aluminum Brazing Sheet by Stepwise Dissolution Measurement
Meijers, S. D. / de Wit, J. H. W. | 2002
1
Misfire Pattern Recognition in High-Performance SI 12-Cylinder Engine
Moro, D. / Azzoni, P. / Minelli, G. | 1999
1
Understanding Vehicle Roll Using Mechanism Simulation Software
Jones, R. A. | 1999
1
Application of Monte Carlo Analysis to Life Cycle Assessment
Raynolds, M. / Checkel, M. D. / Fraser, R. A. | 1999
1
1996 GM 7.4 Liter Engine Upgrade
Mantey, C. A. / Oldani, J. P. | 1996
1
Creep Prediction of Adhesive Joints
McCaskill, J. W. / Robbins, B. / Haas, T. W. | 1996
1
Use of the West Virginia University Truck Test Cycle to Evaluate Emissions from Class 8 Trucks
Clark, N. N. / Messer, J. T. / McKain, D. L. / Wang, W. / Bata, R. M. / Gautam, M. / Lyons, D. W. | 1996
1
Off-Cycle Exhaust Emissions from Modern Passenger Cars with Properly-Functioning Emissions Controls
Goodwin, R. W. / Ross, M. H. | 1996
1
2004-01-1583 An Electric Traction Platform for Military Vehicles
Cantemir, C.-G. / Hubert, C. / Rizzoni, G. | 2004
1
2004-01-0197 Polymer Clad Silica Optical Data Communication System
Johnson, B. E. / Olsen, E. J. | 2004
1
Ion Exchange Systems for Chromic Acid Recovery and Purification from Plating and Anodizing Operations
Leatherdale, J. / Dejak, M. | 1992
1
2004-01-0693 Microstructural Aspects of Soot Oxidation in Diesel Particulate Filters
Konstandopoulos, A. G. / Kostoglou, M. | 2005
1
2005-01-0081 Numerical and Experimental Investigation of Strain-Path Effects on Localized Deformation in Steel Alloys
Inal, K. / Neale, K. / Hamelin, C. J. / Pilkey, A. K. / Diak, B. J. | 2005
1
Demonstration of High Temperature Durability for Oval Ceramic Catalytic Converters-2
Locker, R. J. / Sawyer, C. B. / Schmitt, P. S. | 1998
1
Benefits of Solids Removal from Chromate Deoxidizer Process Bath
Lindblad, K. O. / Corvello, A. A. | 1993
1
Service Information Resources
Probst, C. O. / Heyler, J. | 1993
1
2006-01-0022 Experiments on Wave Transmission and Reflection by Turbochargers in Engine Operating Conditions
Torregrosa, A. J. / Serrano, J. R. / Dopazo, J. A. / Soltani, S. | 2007
1
2006-01-0095 ITS Technology in Automotive-Who's on First?
Conover, G. D. | 2007
1
Development of a Class C Multiplex Control IC
Azuma, M. / Takagi, Y. / Chujo, N. / Kawahashi, A. | 1993
1
2003-01-2105 FENSAP-ICE Applications to Complete Retorcraft Configurations
Tran, P. / Baruzzi, G. / Akel, I. / Habashi, W. G. / Narramore, J. C. | 2003
1
2001-01-0004 Simulation and Measurement Results of Complex Integrated Vehicle Antenna Systems for Premium Audio Reception
Daginnus, M. R. / Stephan, A. / Kronberger, B. R. P. | 2001
1
2003-01-0013 A Method for Radar-Based Target Tracking in Non-Uniform Road Condition
Miyahara, S. | 2003
1
From Painted "Scrap" to Painted Production Parts
Mitchell, V. / Carroll, M. | 2000
1
Life Cycle Testing of a Sealed 24-V, 42-Ah Nickel-Cadmium Aircraft Battery
Kulin, T. M. | 1997
1
Improving the Operation of Gasoline and Methanol Fuelled Spark Ignition Engines Under Canadian Winter Conditions
Gardiner, D. P. / Rao, V. K. / Bardon, M. F. / Dale, J. D. | 1993
1
2004-01-1738 Deactivation of Oxidation Catalysts by Oil-Derived Sulfur
McCullough, G. / Douglas, R. / McDowell, N. | 2005
1
2007-01-0020 Combined Simulations and OH Chemiluminescence Measurements of the Combustion Process Using Different Fuels Under Diesel-Engine Like Conditions
Pauls, C. / Grunefeld, G. / Vogel, S. / Peters, N. | 2008
1
Analysis of Load Cell Barrier Data to Assess Vehicle Compatibility
Digges, K. / Eigen, A. | 2000
1
An Overview of Current Automatic, Manual and Continuously Variable Transmission Efficiencies and Their Projected Future Improvements
Kluger, M. A. / Long, D. M. | 1999
1
Development of the High Pressure Direct Injection (HPDI) System for Two-Stroke Outboard Motor
Sogawa, M. / Kato, M. | 2002
1
Effects of Advanced Fuels on the Particulate and NO~x Emissions from an Optimized Light-Duty CIDI Engine
Szymkowicz, P. G. / French, D. T. / Crellin, C. C. | 2001
1
The Influence of Lubricating Oil and Diesel Fuel on Ash Accumulation in an Exhaust Particulate Trap
Barris, M. A. / Reinhart, S. B. / Wahlquist, F. H. | 1992
1
2004-01-0043 An Integrated Simulation Model for the Prediction of GDI Engine Cylinder Emissions and Exhaust After-Treatment System Performance
D Errico, G. / Onorati, A. | 2004
1
2003-01-0118 Driver Steering Performance Using Joystick Versus Steering Wheel Controls
Andonian, B. / Rauch, W. / Bhise, V. | 2003
1
2003-01-0183 Die Casting of Magnesium Alloys-The Importance of Controlling Die Filling and Solidification
Sannes, S. / Gjestland, H. / Westengen, H. / Laukli, H. I. / Lohne, O. | 2003
1
Lubricant Effects on Low-Temperature Diesel Engine Cold Starting
Buck, W. H. / Lohuis, J. R. | 1994
1
U.S. Drafted Guidelines on Orbital Debris and How to Convince Space Industries to Use Them
Rogillio, B. R. | 2000
1
Active Noise Cancellation in Future Air Intake Systems
Pricken, F. | 2000
1
Environmentally Preferred Paint Stripper Evaluation
McLaughlin, J. S. / Weir, J. D. / Viktora, R. | 1996
1
2006-01-0062 Development of Pole Impact Testing at Multiple Vehicle Side Locations as Applied to the Ford Taurus Structural Platform
Warner, M. H. / Nordhagen, R. P. | 2007
1
Development of Electric Power Steering
Shimizu, Y. / Kawai, T. | 1992
1
Composite Camshaft-Avoid Lobe Grinding Using Precision PM Lobes
Mueller, H. / Kaiser, A. | 1997
1
Objective Ride and Handling Goals for the 1997 Chevrolet Corvette
Ryan, J. P. / Fuja, S. P. / Schmid, H. A. | 1997
1
2007-01-0138 Modelling and Simulation of 2D ARMA Terrain Models for Vehicle Dynamics Applications
Li, L. / Sandu, C. | 2008
1
2007-01-0101 Exterior Water Management Using a Custom Euler-Lagrange Simulation Approach
Kruse, N. / Chen, K.-H. | 2008
1
2007-01-0360 Engine Component Effects on Spark-Ignition-Caused Radio Frequency Interference (RFI)
Steffka, M. / Trzcinski, D. | 2008
1
Standards for Airborne Power Distribution Systems Used to Power Portable Medical Equipment
Donelson, C. | 1998
1
2002-01-1180 Dynamic Simulation and Analysis of Military Vehicle Airdrop Rigged Item Landing
Pozolo, M. K. | 2002
1
2002-01-0117 High Frequency Effects on Localization and Sound Perception in a Small Acoustic Space
Hartman, R. / Pohlmann, K. / Heber, K. | 2002
1
2004-01-0062 Method of Heat Reduction for Vehicle Traction Motor Inverter Locked at Standstill on a Climbing Slope
Takanohashi, H. / Adachi, S. / Shirasaka, T. | 2004
1
Utilization of ADAMS to Predict Tracked Vehicle Performance
Slattengren, J. | 2000
1
Modeling Steady-State Suspension Kinematics and Vehicle Dynamics of Road Racing Cars - Part I: Theory and Methodology
Crahan, T. C. | 1996
1
Across-Gimbal Ambient Thermal Transport System
Marland, B. / Yun, J. / Bugby, D. / Stouffer, C. / Tomlinson, B. / Davis, T. | 2001
1
Minimizing Driver Demands and Data Acquisition Errors in Trailer Testing
Leonard, M. M. / Tuskan, S. M. / Johnson, D. | 2001
1
2005-01-0322 A Fault-Tolerant Processor Core Architecture for Safety-Critical Automotive Applications
Touloupis, E. / Flint, J. A. / Chouliaras, V. A. / Ward, D. D. | 2005
1
2005-01-0397 Braking of Commercial Vehicles Equipped with Air-Disc Brakes from High Speed-Effects on Stopping Distance
Zagorski, S. B. / Dunn, A. L. | 2005
1
2006-01-0035 Advanced Fuel Cell Development for Automotive Operation
Mitchell, W. L. / Toro, A. | 2007
1
2006-01-1987 "Fuel Flow Method2" for Estimating Aircraft Emissions
DuBois, D. / Paynter, G. C. | 2007
1
High Temperature Properties of Magnesium Die Casting Alloys
Aune, T. K. / Ruden, T. J. | 1992
1
2002-01-0033 On-Line Fastener Finish Quality Monitoring by Electrochemical Impedance Spectroscopy
Wang, Y.-M. / Snyder, D. D. | 2002
1
2000-01-0782 Multiaxial Thermomechanical Deformation Utilizing a Non-Unified Plasticity Model
Kurath, P. / Jones, J. H. | 2001
1
2002-01-1391 Impact of Isotropic Superfinishing on Contact and Bending Fatigue of Carburized Steel
Winkelmann, L. / Michaud, M. / Sroka, G. / Swiglo, A. A. | 2002
1
2003-01-0001 Optimizing the Scavenging System for a Two-Stroke Cycle, Free Piston Engine for High Efficiency and Low Emissions: A Computational Approach
Goldsborough, S. S. / Van Blarigan, P. | 2003
1
2003-01-0039 Diesel Emission Control in Review-The Last 12 Months
Johnson, T. V. | 2003
1
A Method for Accurately Measuring the Dimensions of Nearly Circular Planar Objects
True, R. J. | 1996
1
A Model for Analyzing Cracking of Coatings
Lempriere, B. M. | 1996
1
Vibration Signature Analysis as a Fault Detection Method for SI Engines
DeBotton, G. / Ben-Ari, J. / Itzhaki, R. / Sher, E. | 1998
1
Advanced Three-Way Catalyst Formulations for High Temperature Applications
Bartley, G. J. J. / Shady, P. J. / D'Aniello, M. J. / Chandler, G. R. | 1993
1
2006-01-0001 A Math-Based Methodology for Fatigue Longevity Prediction of 3D Woven Fiberglass-Reinforced, Vinyl-Ester Composites
Lee, M. C. H. / Short, W. T. / Abdi, F. / Qian, J. | 2007
1
Evolution of Instrument Panels Made of Polypropylene
Juan, P. / Naughton, P. / Lee, R. / Krabbenborg, F. | 1998
1
Closed-Loop, Air-Fuel Ratio Control Using Forced Air-Fuel Ratio Modulation
Reed, D. C. / Hamburg, D. R. / Samimy, B. | 1998
1
Study on Lean-Burn Gas Engine Using Pilot Oil as the Ignition Source
Saito, H. / Sakurai, T. / Sakonji, T. / Hirashima, T. / Kanno, K. | 2001
1
A New Closing Method for Wall Flow Diesel Particulate Filters
Stobbe, P. / Petersen, H. G. / Sorenson, S. C. / Hoej, J. W. | 1996
1
Global Trends in Diesel Emissions Control-A 1999 Update
Walsh, M. P. | 1999
1
2003-01-0216 Superior Idle Elimination System for Truck Air-Conditioning (SIESTA)
Jusela, D. R. / Khalili, K. | 2003
1
2000-01-0001 Fuels for Fuel Cell-Powered Vehicles
Casten, S. / Teagan, P. / Stobart, R. | 2000
1
2001-01-0051 Comfort and Usability of the Seat Belts
Balci, R. / Vertiz, A. / Shen, W. | 2001
1
Ion-Gap Sense in Misfire Detection, Knock and Engine Control
Auzins, J. / Johansson, H. / Nydomt, J. | 1996
1
Hot End Cleaning-Corrosion Pitting of Turbine Discs
Rich, C. / Soley, P. | 1993
1
A New Heating and Air Conditioning System for a New Generation of Vehicles
Bartsch, E. | 1993
1
Factors Affecting Pumpability and Cold Cranking in Heavy Duty Diesel Truck Engines at Low Ambient Temperatures-Part II
Alexander, A. G. / May, C. J. / Smith, C. R. | 1992
1
Single-Cylinder Engine Facility to Study Cold Starting-Results with Propane and Gasoline
Quader, A. A. | 1993
1
Injection/Composite Molding of Glass-Reinforced Thermoset Composites for Automotive Under-Hood Applications
Peterson, L. | 1992
1
2006-01-3653 A Theoretical and Experimental Study of Resonance in a High-Performance Engine Intake System
Brennan, S. / Kee, R.J. / Kenny, R.G. / Fleck, R. / Gaynor, J.A. / Fleck, B. | 2008
1
Analyzing the Real-Time Characteristics of Class C Communications in CAN Through Discrete Event Simulations
Upender, B. P. | 1994
1
Global Vehicle Lighting System
Cejnek, M. / Kutac, M. / Krizak, M. | 1999
2
The effects of heavy metal contamination on magnesium corrosion performance
Hillis, J.E. | 1983
4
Ceracote 484 - A New Aluminum Ceramic Coating with Low Cr^6^� Content for Corrosion Control of Compressor Components
Thoma, M. | 1993
5
Development of Plastic Intake Manifold by DRI Process
Yamaguchi, S. | 2000
5
2004-01-0199 Dynamic Discovery Service Protocols for Next Generation Vehicle Network
Baroody, R. / Al-Holou, N. / Rashid, A. | 2004
5
2003-01-0218 Terrain Roughness Standards for Mobility and Ultra-Reliability Prediction
Gorsich, D. J. / Chaika, M. / Gunter, D. / Karlsen, R. / Haueisen, B. / Sun, T. / Ferris, J. | 2003
6
2005-01-0082 Analysis of the Increased Formability of Aluminum Alloy Sheet Formed Using Electromagnetic Forming
Imbert, J. / Worswick, M. / Winkler, S. / Golovashchenko, S. / Dmitriev, V. | 2005
6
Stress Durability Testing of Adhesively Bonded Steel
Dickie, R. A. / DeBolt, M. A. / Ward, S. M. | 1996
6
2006-01-0037 Impacts of Combining Hydrogen ICE With Fuel Cell System Using PSAT
Kwon, J. / Sharer, P. / Rousseau, A. | 2007
6
The Significance of Environment for Performance of Structural Adhesive Bonding
Wilson, I. / Sheasby, P. G. / Maddison, A. | 1997
6
The Results of Bringing a New Benzyl Alcohol Paint Stripper to the Aviation Market
Tear, D. M. / Maxwell, J. W. | 1996
6
Intervehicular Information System (IVIS): The Basis for a Tactical Information System
Gary Diaz, R. | 1994
6
Hydrocarbon Emissions from a HAJI-Equipped Ultra-Lean-Burn SI Engine
Lawrence, J. / Watson, H. C. | 1998
7
Achieving Heavy-Duty Diesel NO~x/PM Levels Below the EPA 2002 Standards-An Integrated Solution
Khair, M. / Lemaire, J. / Fischer, S. | 2000
7
2001-01-1694 R134A Suction Line Heat Exchanger in Different Configurations of Automotive Air-Conditioning Systems
Preissner, M. / Radermacher, R. / Zhang, C. / Dickson, T. | 2002
7
Development of a Lubrication Model for the CMC Scotch Yoke Mechanism
Gabler, R. P. / Watson, H. C. / Rosenkranz, H. G. | 1998
7
A System for In-Flight Weather Mapping Using Existing Ground-Based Facilities
MacGill, T. D. / Fetter, J. L. | 1998
7
2002-01-0121 FM Radio Reception Simulation in Open Space
Miyahara, S. / Ishigame, Y. / Adrian, A. | 2002
7
2005-01-0452 Development of Hydrogen Sensor for Fuel Cell Applications
Inoue, R. / Watanabe, M. / Kitanoya, S. / Yamada, T. | 2005
7
Effect of Polyurethane Foam on the Energy Management of Structural Components
Alwan, J. M. / Wu, C.-C. / Chou, C. C. | 2000
7
2007-01-0391 Novel Vertical Hall Elements for High Functional Linear Angular Sensor
Oohira, S. / Suzui, K. / Isobe, Y. / Fujino, S. | 2008
7
Chrysler 45RFE-A New Generation Light-Truck Automatic Transmission
Martin, B. / Redinger, C. J. / Dourra, H. | 1999
7
A Breakthrough in Thermal Battery Performance - Expanding the Envelope to Multi-HOUR Missile/Aircraft Missions
Shuster, N. | 1997
7
Design of Reflector Optics for Visually Aimable Low Beam Headlamps
Kreysar, D. / Coon, M. R. L. / Wang, B. | 1999
7
2004-01-0069 Incorporating an Electric Machine Into the Transmission Control of Ford's Modular Hybrid Transmission
Ortmann, W. / Colvin, D. / Fozo, S. R. / Encelewski, M. / Kraska, M. | 2004
7
2004-01-0130 A Case Study of a Die-Cast Magnesium Structure Supporting Transmission Shifter Mechanisms and Interfaced with Other Structural Systems
Ruden, T. / Lenda, D. | 2004
7
Condition Monitoring of Thermal Reciprocating Engines Through Analysis of Rolling Block Oscillations
Macian, V. / Lerma, M. J. / Barila, D. | 1998
8
2002-01-1333 Personal and Charitable Planning Under Tax Relief 2001
Chavers, G. D. | 2002
8
Finish Cracking of Composite Flight Control Surfaces
Maguire, R. G. | 1996
8
Embedded Miniature Heat Pipes in Ceramic Cofire Substrates
Zampino, M. / Jones, W. K. | 1999
8
2005-01-0277 AISIN AW New Full Hybrid Transmission for FWD Vehicles
Hisada, H. / Taniguchi, T. / Tsukamoto, K. / Yamaguchi, K. / Suzuki, K. / Iizuka, M. / Mochizuki, M. / Hirano, Y. | 2005
8
2002-01-0036 ULSAB-AVC-Overview and Design
Thorpe, M. D. / Adam, H. | 2002
8
Development of CHISSO NEWCON[TM] for Automotive use
Okayama, C. / Akitaya, S. / Mori, K. | 1998
8
Overall Results: Phase I Ad Hoc Diesel Fuel Test Program
Kenney, T. E. / Gardner, T. P. / Low, S. S. / Eckstrom, J. C. / Wolf, L. R. / Korn, S. J. / Szymkowicz, P. G. | 2001
8
2001-01-0115 An Assessment of Narrow Object Frontal Impact Calculation Methods
Meyer, S. E. / Hayden, J. D. / Forrest, S. | 2001
8
Development of the Miniature Spacecraft Energy Retention (MiSER) Thermal Control Panel
Mehoke, D. S. / Lankford, K. | 2001
8
Measurement of Ambient Air Entrainment into Transient Free Gas Jet by Means of Flow Visualization
Tomita, E. / Hamamoto, Y. / Tsutsumi, H. / Yoshiyama, S. | 1996
8
The Critical Contaminant Limits and Salt Water Corrosion Performance of Magnesium AE42 Alloy
Mercer, W. E. / Hillis, J. E. | 1992
8
The Variable Valve Timing System - Application on a V8 Engine
Titolo, A. | 1992
8
2007-01-0336 Hot- and Cold-Rolled Low-Carbon Manganese TRIP Steels
Merwin, M.J. | 2008
8
2000-01-0003 Fuel Choices for Fuel Cell-Powered Vehicles
Berlowitz, P. J. / Darnell, C. P. | 2000
8
Self-Discharging of Lead-Acid Batteries
Catherino, H. A. / Shi, P. / Rusek, A. / Feres, F. | 2000
8
Network Architecture for CAN
Mathony, H.-J. / Kaiser, K.-H. / Unruh, J. | 1993
9
Real Time Engine Control Using STR in Feedback System
Maki, H. / Akazaki, S. / Hasegawa, Y. / Komoriya, I. / Nishimura, Y. / Hirota, T. | 1996
9
Performance of Plasmaspray Coated Bore 4.6L-V8 Aluminum Block Engines in Dynamometer and Fleet Vehicle Durability Tests
Rao, V. D. N. / Kabat, D. M. / Rose, R. / Yeager, D. / Brandt, R. / Leong, D. Y. | 1997
9
Linking Diagnostics with Service Information
Liang, M. Q. | 1993
9
A Study of the Regeneration Process in Diesel Particulate Traps Using a Copper Fuel Additive
Tan, J. C. / Opris, C. N. / Baumgard, K. J. / Johnson, J. H. | 1996
9
Reduced Cold-Start Emissions Using Rapid Exhaust Port Oxidation (REPO) in a Spark-Ignition Engine
Crane, M. E. / Thring, R. H. / Podnar, D. J. / Dodge, L. G. | 1997
9
Spray Application of Low-VOC Coatings Using Supercritical Fluids
Nielsen, K. A. / Busby, D. C. / Glancy, C. C. / Kuo, A. C. | 1992
9
Lube Basestock Manufacturing Technology and Engine Oil Pumpability
Rossi, A. | 1994
9
Development of a Method to Measure Engine Air Cleaner Fractional Efficiency
Jaroszczyk, T. / Fallon, S. L. / Liu, Z. G. / Heckel, S. P. | 1999
9
Model-Based Diagnosis for the Air Intake System of the SI Engine
Nybarg, M. / Nielsen, L. | 1997
9
2007-01-3048 Evaluation of Sweetpotatoes Grown With and Without Ryegrass Cover Crop
Gichuhi, P.N. / Hathorn, C.S. / Kpomblekou-A, K. / Bovell-Benjamin, A.C. | 2008
10
New Beginnings: Fascia to Roof Rail Using LCM to Evaluate Chemical Reclamation of Polyurethanes
Prokopyshen, M. H. / Feuerherd, K.-H. / Steinmetz, D. C. / Patzelt, R. R. / Kicherer, A. / Durocher, D. T. | 1999
10
2003-01-0016 Development of 2-Chip IPCAM
Ishikura, H. / Fujii, Y. / Sakata, K. / Tsukaoka, H. / Yamamoto, T. / Yasui, K. | 2003
10
A Validation Study of Vehicle Dynamics Simulations for Heavy Truck Handling Maneuvers
Milich, E. P. / Fife, N. F. / Guenther, D. A. | 2001
10
2001-01-0005 The Impact of Multiple Sample Rates on Multimedia System Design
Czekaj, J. L. | 2001
10
Dynamic Characterization of Microcellular Urethane Jounce Bumpers Under Impact Conditions
Norton, R. L. / Plasse, B. P. | 1999
10
2003-01-0187 Bolt Load Compressive Stress Retention Testing of Magnesium Alloys
Druschitz, A. P. / Showalter, E. R. | 2003
10
2007-01-0139 Experimental Validation of a Time-Accurate Finite Element Model for Coupled Multibody Dynamics and Liquid Sloshing
Wasfy, T.M. / O Kins, J. / Smith, S. | 2008
10
Validation of a Crack Initiation Life Analysis Procedure
Leist, R. / Shi, Y. | 2000
10
2004-01-1586 Logistics and Capability Implications of a Bradley Fighting Vehicle with a Fuel Cell Auxiliary Power Unit
Conover, J. / Husted, H. / MacBain, J. / McKee, H. | 2004
10
2005-01-0004 Impact of FreedomCAR Goals on Well-To-Wheel Analysis
Sharer, P. / Rousseau, A. / Pagerit, S. / Wu, Y. | 2005
11
Performance Modelling of Automotive Multiplex Systems
Rumpf, O. J. / Eckrich, M. J. / Kempf, G. G. | 1994
11
Large Aircraft Robotic Paint Stripping (LARPS) System
Hofacker, S. A. | 1993
11
Spatially Resolved Effects of Deactivation on Field-Aged Automotive Catalysts
Jobson, E. / Hoegberg, E. / Weber, K. H. / Smedler, G. | 1992
11
Repair of Trailing Edge of C1023 NGVs by a Gouge-and-Braze Technique
Lim, L. C. / Sivashanker, S. / Tung, S. K. | 1994
11
2003-01-0266 Recent Results on Liquid-Fuelled APU for Truck Application
Venturi, M. / Kallio, E. / Smith, S. / Baker, J. / Dhand, P. | 2003
11
Catalytic Reduction of NO~x in Actual Diesel Engine Exhaust
Konno, M. / Chikahisa, T. / Murayama, T. / Iwamoto, M. | 1993
11
2006-01-0002 Use of Sheet Molding Compound for Intake Manifold Combined With Rocker Cover in DI Diesel Engines
Joshi, A. D. / Petkar, R. M. / Deshpande, P. V. | 2007
11
2004-01-0060 Hydrogen-Fueled Hybrid: Pathway to a Hydrogen Economy
Geiss, R. / Webster, B. / Ovshinsky, S. R. / Stempel, R. / Young, R. C. / Li, Y. / Myasnikov, V. / Falls, B. / Lutz, A. | 2004
11
Effects of Various Methods for Improving Vehicle Startability and Transient Response of Turbocharged Diesel Trucks
Matsura, Y. / Nakazawa, N. / Kobayashi, Y. / Ogita, H. | 1992
12
Design Synthesis of Suspension Architecture for the 1997 Chevrolet Corvette
Schmid, H. A. / Fuja, S. P. / Ryan, J. P. | 1997
12
HID System with Adaptive Vertical Aim Control
Kormanyos, C. M. | 1999
12
2002-01-0048 Studies on Enhanced CVS Technology to Achieve SULEV Certification
Behrendt, H. / Morsch, O. / Seiferth, C. T. / Seifert, G. E. / Wiebrecht, J. W. | 2002
12
The use of Radioactive Tracer Technology to Measure Engine Ring Wear in Response to Dust Ingestion
Treuhaft, M. B. | 1993
12
Steps Towards an Optimization of the Dynamic Emission Behavior of IC Engines: Measurement Strategies - Modelling - Model-Based Optimization
Hafner, M. | 2002
12
Developments of the Internal High-Pressure Forming Process (IHV)
Klaas, F. / Luecke, U. / Kaehler, K. | 1993
12
Investigation of Thermoforming as a Method of Manufacturing Plastic Air Intake Manifolds
Mallick, P. K. / Daly, P. | 2000
12
2005-01-0413 The Development of a Heavy Truck ABS Model
Zaugg, B. C. / Heydinger, G. J. / Guenther, D. A. / Dunn, A. L. / Zagorski, S. B. / Grygier, P. A. | 2005
12
2006-01-0112 Electronic Throttle Simulation Using Nonlinear Hammerstein Model
Al-Assadi, S. / Breitinger, J. / Traver, M. | 2007
12
910069 A Mathematical Model Based Method for Diagnosing Failures in Automotive Electronic Systems
Ribbens, W. B. | 1992
13
A Methodology for Estimating the Value of Interior Room in Automobiles
Simek, M. E. / Cook, H. E. | 1996
13
2007-01-0392 Multiparameter Oil Condition Sensor Based on the Tuning Fork Principle
Dobrinski, H. / Buhrdorf, A. / Ludtke, O. / Knipper, U. | 2008
13
Aspects of Laminar and Turbulent Burning Velocity Relevant to SI Engines
Gillespie, L. / Lawes, M. / Sheppard, C. G. W. / Woolley, R. | 2000
13
Utilization of a Soft Ionization Mass Spectrometer for Ultra-High Sensitivity and Fast Response Emission Measurement
Akashi, K. / Inoue, K. / Adachi, M. / Ishida, K. / Villinger, J. / Federer, W. / Dornauer, A. | 1998
13
2003-01-0121 Investigation of Acceleration Performance Feeling on a Rotary Engine Sports Car with Driving Simulator
Kamura, T. / Fukuhara, C. / Suetomi, T. / Kuroda, M. / Sasaki, K. | 2003
13
Effect of Texture of Iced Road Surface on Characteristics of Ice and Snow Tires
Shimizu, K.-I. / Nihei, M. / Doremieux, F. | 1993
13
The Intelligent Situation Awareness and Forecasting Environment (The S.A.F.E. Concept)
Burdun, I. Y. | 1998
13
2002-01-1335 AutoJust™ Clutch
Szadkowski, A. / Morford, R. B. / Abusamra, M. | 2002
13
2004-01-0200 Avoiding Accelerating Incorrectly While Steering with CAN Networks
Jin, H. / Li, G. / Song, Y. | 2004
13
Variability of Head Injury Criteria with the Hybrid III Dummy
Crandall, J. R. / Martin, P. G. / Pilkey, W. D. | 1996
13
2005-01-2762 Space Flight Biomedical Deterioration Prevention and Correction Using Biophotonic Technology: From Postural Deficiency Syndrome to Space Adaptation Syndrome
Souvestre, P. / Landrock, C. | 2005
13
2001-01-1695 Development of Engine Cooling Systems by Coupling CFD Simulation and Heat Exchanger Analysis Programs
Uhl, B. / Brotz, F. / Fauser, J. / Kruger, U. | 2002
13
2006-01-0040 2-Step Variable Valve Actuation: System Optimization and Integration on an SI Engine
Sellnau, M. / Kunz, T. / Sinnamon, J. / Burkhard, J. | 2007
13
2005-01-0455 Design of Non-Contact Torque Sensor for Electric Power Steering System
Hanlu, Z. / Xuewu, J. / Xiaoping, M. / Kuiyuan, C. | 2005
13
2007-01-0102 Virtual Aerodynamic Engineering at General Motors Corporation Europe Development of the 2006 OPEL Corsa
Hahn, S.A. / Kruse, N. / Werner, F. | 2008
14
Cold Start Performance Comparison of Alcohol Fueled Engines with In-Cylinder and Port Fuel Injection
Quissek, F. / Zelenka, P. / Hulak, K. / Kapus, P. | 1993
14
F-22 Aircraft Battery-Charger-Controller System
Stoneham, T. A. | 1999
14
Development of Soft TPEE CVJ Boot
Mukaida, T. / Kojima, Y. / Shiraishi, M. | 1998
14
2005-01-0279 Method of Predicting Hill-Climbing Performance in Batteryless Motorized-Four-Wheel-Drive System
Imura, S. / Kowatari, T. / Shimizu, H. / Matsuzaki, N. / Yamamoto, D. / Ikeda, Y. | 2005
14
2003-01-2106 Aerodynamic Flow-Off of Type II And Type IV Aircraft Ground Anti-Icing Fluids
Beisswenger, A. / Fortin, G. / Laforte, J.-L. | 2003
14
Running Loss Temperature Profiles
Cam, T. M. / Cullen, K. / Baldus, S. L. / Sime, K. A. | 1993
14
Development of an APU Gearbox Clutch Control System for use in Cold Climates and with High Power Density
McArthur, M. J. | 1997
14
2007-01-0007 Phenomena That Determine Knock Onset in Spark-Ignition Engines
Mittal, V. / Revier, B.M. / Heywood, J.B. | 2008
14
2003-01-0017 Development of "All-Around View" System
Oizumi, K. / Yamamoto, Y. / Sakata, M. / Inoue, M. | 2003
14
2002-01-1516 High Speed Drilling of AL-2024-T3 Alloy
Nair, R. M. / Durairajan, B. / Bahr, B. | 2002
14
Non-Ra Roughness Parameters of Shaft Surfaces for Radial Lip Seal Applications
Qu, J. | 1996
14
An Experimental end Computational Study of Flow Characteristics in Exhaust Manifold and CCC (Close-Coupled Catalyst)
Park, S.-B. / Kim, H.-S. / Cho, K.-M. / Kim, W.-T. | 1998
15
2007-01-3059 MarsCruiserOne
Vogler, A. / Vittori, A. / Ransom, S. / Granziera, L. | 2008
15
2003-01-0040 Heavy-Duty Diesel Emission Regulations-Past, Present, and Future
Merrion, D. F. | 2003
15
2006-01-2007 Results Summary of the Life Support and Habitation and Planetary Protection Workshop
Hogan, J. A. / Race, M. S. / Fisher, J. W. / Joshi, J. A. / Rummel, J. D. | 2007
15
2001-01-0013 Measurement and Evaluation of Distortion in Vehicle Audio Systems
Ziemba, M. | 2001
15
2004-01-0023 Study of the Impact on the Spray Shape Stability and the Combustion Process of Supply Pressure Fluctuations in CR-Diesel Injectors
Pontoppidan, M. / Ausiello, F. / Bella, G. / Ubertini, S. | 2004
15
Common Occupant Crash Protection for Army Wheeled Trucks
Sicher, L. A. / Whitman, G. R. / Yannaccone, J. R. / D Aulerio, L. A. / Cantor, A. | 2000
15
2002-01-0040 Development of Hot-Rolled Sheet Steel with the Significant Increase in Tensile Strength Induced by Strain Age Hardening
Kaneko, S. / Hiramoto, J. / Matsuoka, S. / Tosaka, A. / Sakata, K. | 2002
15
Aluminum As-Rolled Sheet for Automotive Applications - Effect of Surface Oxide on Resistance Spot Welding and Adhesive Bonding Behavior
Kucza, J. C. / Butruille, J. R. / Hank, E. / Lancrenon, B. | 1997
16
2004-01-0694 The Diesel Exhaust Aftertreatment (DEXA) Cluster: A Systematic Approach to Diesel Particulate Emission Control in Europe
Konstandopoulos, A. G. / Zarvalis, D. / Papaioannou, E. / Vlachos, N. D. / Boretto, G. / Pidria, M. F. / Faraldi, P. / Piacenza, O. / Prenninger, P. / Cartus, T. | 2005
16
2004-01-0131 Robustness of Large Thin-Wall Magnesium Die Castings for Crash Applications
Alain, R. / Lawson, T. / Katool, P. / Wang, G. / Jekl, J. / Berkmortel, R. / Miller, L. / Svalestuen, J. / Westengen, H. | 2004
16
Manufacturing Feasibility of All-Aluminum Automotive Engines Via Application of High Silicon Aluminum Alloy
Donahue, R. / Fabiyi, P. A. | 2000
16
Development of High Velocity Oxy-Fuel Applied Hardface Coating Using Taguchi Technique
Chon, T. / Kushner, B. A. / Rotolico, A. J. | 1992
16
Measurement of Cylinder Bore Deformation During Actual Operating Engines
Fujimoto, H. / Yoshihara, Y. / Goto, T. / Furuhama, S. | 1992
16
Crankshaft Durability Prediction a New 3-D Approach
Henry, J.-P. / Toplosky, J. / Abramczuk, M. | 1992
16
Stages in the Development of Four-Wheel Drive Systems in Audi Passenger Cars
Hessing, B. / Muller, E. / Stockmar, J. | 1992
16
2003-01-0189 Die-Cast Magnesium Alloys for High-Temperature Applications
Bakke, P. / Westengen, H. / Pettersen, K. / Albright, D. | 2003
16
Recent Advancement of Non-Chromate Low Density Epoxy Primer Coatings for Aerospace Applications
Chiang, R. N. | 1996
16
A Comparison of Controller Designs for an Active, Electromagnetic, Off-Road Vehicle Suspension System Traveling at High Speed
Schuetze, K. T. / Beno, J. H. / Weldon, W. F. / Sreenivasan, S. V. | 1998
16
Measurement of Engine Friction Power by Using Inertia Tests
Harari, R. / Sher, E. | 1996
17
2004-01-1805 Learjet Model 45 Steep Approach Certification
Asselin, M. / Hinson, M. / Storrer, B. | 2004
17
2004-01-0188 Virtual-Aided Development Process According to FMVSS201u
Knotz, C. / Mlekusch, B. | 2004
17
Bench Test for Scuff Evaluation of Surface Modified Piston and Bore Materials
Malaczynski, G. / Qiu, X. / Hamdi, A. / Elmoursi, A. | 1996
17
Position Dependent Amplitude Response in Automotive Loudspeakers
Ziemba, M. | 2000
17
Investigation of Transient Temperature Oscillations of a Propylene Loop Heat Pipe
Rodriguez, J. I. / Na-Nakornpanom, A. | 2001
17
Painting TPO
Davis, K. K. / Clark, P. D. | 1992
17
Technical Training Resources: An Aftermarket Perspective
Corrigan, G. J. | 1993
17
Life-Cycle Assessment of a Powertrain Structural Component: Diecast Aluminum Vs. Hypothetical Thixomolded® Magnesium
Phipps, A. / Keoleian, G. / Shen, D. / Messick, R. | 1999
17
2006-01-0031 Doped Zirconia With High Thermal Stability, for High Sulfur Resistance Diesel Oxidation Catalysts
Verdier, S. / Huang, A. / Rohart, E. / Larcher, O. / Harle, V. / Allain, M. | 2007
17
2006-01-0141 Adaptive Cruise Control for Heavy-Duty Vehicles: A Torque-Based Approach
Bengea, S. C. / Eyabi, P. B. / Nowak, M. P. / Avery, R. M. / Anderson, R. O. | 2007
17
The GE90 - Designing for Maintainability
Szecskay, F. R. | 1994
18
2001-01-0117 Improved ATD Positioning Procedures
Reed, M. P. / Manary, M. A. / Flannagan, C. A. C. / Schneider, L. W. / Arbalaez, R. A. | 2001
18
Advanced Lightsource Model for Simulation of Optical Devices
Haack, U. | 1999
18
Development of Torsion Beam Rear Suspension with Toe Control Links
Murata, S. / Kaneko, T. / Sakai, H. / Shimatani, H. / Watanabe, K. | 1999
18
A Comparison of the Technical Properties of Arc Sprayed Versus Plasma Sprayed Nickel-5 Aluminum
Unger, R. H. / Grossklaus, W. D. | 1993
18
2003-01-0267 Synthetic Hydrocarbon Fuel for APU Application: The Fuel Processor System
Venturi, M. / Megede, D. z. / Keppeler, B. / Dobbs, H. / Kallio, E. | 2003
18
2006-01-0003 A Study on the Performance of Air Suspension for Different Kinds of Rubber and Cord Materials Used in Rubber Tube
Park, T.-W. / Kim, S.-S. | 2007
18
2004-01-0205 Safe-By-Wire: The Leading Edge in Vehicle Airbag Control
Boys, R. | 2004
18
2007-01-0026 An Accurate Determination of the Cetane Number Value of GTL Diesel
Yates, A.D.B. / Viljoen, C. / Metcalf, O. | 2008
18
Diesel Exhaust Treatment-New Approaches to Ultra Low Emission Diesel Vehicles
Luders, H. / Stommel, P. / Geckler, S. | 1999
19
Error Analysis of Curvature-Based Contour Measurement Devices
Bass, C. R. / Wang, C. / Crandall, J. | 2000
19
2005-01-0083 A Benchmark Test for Springback: Experimental Procedures and Results of a Slit-Ring Test
Xia, Z. C. / Shi, M. F. / Gnaeupel-Herold, T. / Miller, C. E. / Konieczny, A. / Chen, X. M. / Lou, M. | 2005
19
End of Stack Controls - The Abatement Alternative
Jenkins, J. B. | 1996
19
Development and Application of Advanced Emulsion Hydraulic Fluids
Young, K. J. | 1996
19
Determination of Wear Index to Predict Fuel Filtration Performance
Bessee, G. B. | 1999
19
Comparison of the AIS-85 and AIS-90 with NASS-93
Garthe, E. A. | 1996
19
2005-01-0459 Development of Hall Effect Device Based Height Sensor
Kato, Y. / Okuya, H. / Yasuda, K. / Mori, K. | 2005
19
2004-01-1587 A Suspension System Suitable for Wheels or Tracks
Timoney, E. | 2004
19
2000-01-0011 Design and Operational Characteristics of Automotive PEM Fuel Cell Stacks
Barbir, F. / Fuchs, M. / Husar, A. / Neutzler, J. | 2000
19
Electrically Heated Extruded Metal Converters for Low Emission Vehicles
Socha, L. S. / Thompson, D. F. | 1993
20
Regenerative Active Suspension on Rough Terrain Vehicles
Wendel, G. R. / Steiber, J. / Stecklein, G. L. | 1994
20
Data Reduction in Automotive Multiplex Systems
Kempf, G. G. / Eckrich, M. J. / Rumpf, O. J. | 1994
20
Engine Studies of Solid Film Lubricant Coated Pistons
Rao, V. D. N. / Kabat, D. M. / Yeager, D. / Lizzote, B. | 1997
20
In-Line Hydrocarbon (HC) Adsorber System for Cold-Start Emissions
Noda, M. / Takahashi, A. / Mizuno, H. | 1997
20
2003-01-0018 The "Night View System" Using Near-Infrared Light
Toyofuku, K. / Iwata, Y. / Hagisato, Y. / Kumasaka, T. | 2003
20
A Gateway for CAN Specification 2.0 Non-Passive Devices
Szydlowski, C. | 1993
20
Environmental Standards for Biodegradable Hydraulic Fluids and Correlation of Laboratory and Field Performance
Battersby, N. / Dixon, R. T. / Greenall, S. / Watson, C. W. / Young, K. J. / Ehn, J. / Marougy, T. | 2000
20
Comparison Between Lean-Burn and Stoichiometric Technologies for CNG Heavy-Duty Engines
Corbo, P. / Gambino, M. / Iannaccone, S. / Unich, A. | 1996
20
Radial Shaft Seals in Arctic Conditions
Vaelttilae, J. | 1994
20
2002-01-0138 An Idle Speed Controller Using Analytically Developed Fuzzy Logic Control Law
Ganesan, S. / Dessert, P. / Sharma, R. P. / Yasin, S. | 2002
20
2005-01-0282 Optimal Design and Control of a Wheel Motor for Electric Passenger Cars
Yang, Y.-P. / Chuang, D.-S. | 2005
20
2007-01-0340 On Formability Limitations in Stamping Involving Sheared Edge Stretching
Konieczny, A. / Henderson, T. | 2008
21
2004-01-0192 Simulation of Full Vehicle Misuse Behavior
Hauke, M. | 2004
21
2002-01-1517 Experimental Study of Hole Quality in Drilling of Titanium Alloy (6AL-4V)
Syed, I. / Bahr, B. / Sha, J. / Tadayon, F. | 2002
21
(Test Developed For) Classifying Valve Bridge Cracking Solutions in Cylinder Heads
Tosch-Thrush, S. S. / Eure, G. | 1996
21
2002-01-0044 ULSAB-Advanced Vehicle Concepts-Materials
Shaw, J. / Engl, B. / Espina, C. / Oren, E. C. / Kawamoto, Y. | 2002
21
Methodology for Effective Design Evaluation and Durability Approval of Car Suspension Components
Grubisic, V. V. / Fischer, G. | 1997
21
2006-01-0113 Integrated Robust H-Infinity Controller Synthesis in Respect of Automotive Engineering Applications
Walter, A. / Lohning, M. / Kiencke, U. | 2007
21
On-Board Diagnosis of Internal Combustion Engines: A New Model Definition and Experimental Validation
Grimaldi, C. N. / Mariani, F. | 1997
21
2001-01-0076 ULSAC-Lightweight Steel Automotive Closures
Koehr, R. | 2001
21
Error Analysis of Center-Of-Gravity Measurement Techniques
Shapiro, S. C. / Arndt, S. M. / Mowry, G. A. / Dickerson, C. P. / Arndt, M. W. | 1996
21
2003-01-0002 Fluid-Dynamic Analysis of the Intake System for a HDDI Diesel Engine by STAR-CD Code and LDA Technique
Auriemma, M. / Caputo, G. / Corcione, F. E. / Valentino, G. / Riganti, G. | 2003
22
Exhaust Tuning on Four-Stroke Engine; Experimentation and Simulation
Blair, G. P. / Mackey, D. O. / Ashe, M. C. / Chatfield, G. F. | 2002
22
2007-01-0104 Experimental Investigations and Computations of Unsteady Flow Past a Real Car Using a Robust Elliptic Relaxation Closure with a Universal Wall Treatment
Basara, B. / Aldudak, F. / Jakirlic, S. / Tropea, C. / Schrefl, M. / Mayer, J. / Hanjalic, K. | 2008
22
Stamping Part Surface Quality Improvement Through Process Optimization
Zhang, Z. T. / Pitt, G. / King, A. / Bohonek, I. | 1998
22
910126 Heavy Truck Deceleration Rates as a Function of Brake Adjustment
Heusser, R. B. | 1992
22
2005-01-0007 Lightweight Opportunities for Fuel Cell Vehicles
Das, S. | 2005
22
The Effect of High Pressure Water on Material Integrity of Selected Aircraft Coatings and Substrates
Harbaugh, D. J. / Stone, M. A. | 1993
22
2003-01-2120 Considerations When Performing Icing Wind Tunnel Testing to Determine Critical Temperature
Severson, J. A. | 2003
22
Applying D Sight Technology to Aging Aircraft Corrosion NDI
Willie, D. J. | 1996
22
Robotic Interface for Dynamic System Analysis and Interaction
Luecke, G. R. / Tan, K.-L. / Simpson, G. | 1999
22
Variability in Center of Gravity Height Measurement
Winkler, C. B. / Campbell, K. L. / Mink, C. E. | 1993
22
Xenon Light for Main and Dipped Beam
Kalze, F.-J. | 1999
23
Alternative Coating Methods-Application of Automotive "paint Films"
Balch, T. C. / Seemann, R. W. | 1992
23
2007-01-0394 Novel Fuel Sensor-Innovation for Cold Start Improvement and for the Prevention of Misfueling
Muller, H. / Krome, J. / Kuhnau, U. | 2008
23
Roll Centers and Jacking Forces in Independent Suspensions-A First Principles Explanation and a Designer's Toolkit
Gerrard, M. B. | 1999
23
The Characterization of Used Heavy Duty Engine Coolant
Woyciesjes, P. M. / Woodward, S. M. / Gershun, A. V. / Frost, R. A. | 1993
23
2001-01-1704 Intake-Valve Temperature Histories During S.I. Engine Warm-Up
Alkidas, A. C. | 2002
23
Prediction of Erosion Inside the Engine Cylinder Due to Particulated Flow
Abdel Azim El-Sayed, A. F. / El-Salmawy, H. A. / Shamloul, M. M. / Mesalhy, O. M. | 1999
23
2006-01-0443 Engine-in-the-Loop Testing for Evaluating Hybrid Propulsion Concepts and Transient Emissions-HMMWV Case Study
Filipi, Z. / Fathy, H. / Hagena, J. / Knafl, A. / Ahlawat, R. / Liu, J. / Jung, D. / Assanis, D. / Peng, H. / Stein, J. | 2007
23
Spark-Assisted Alcohol Operation in a Low Heat Rejection Engine
Jabez Dhinagar, S. / Nagalingam, B. N. / Gopalakrishnan, K. V. | 1996
23
Diesel Engine Cold Starting: Combustion Instability
Henein, N. A. / Zahdeh, A. R. / Yassine, M. K. / Bryzik, W. | 1993
23
2004-01-0073 Performances and Durability of DPF (Diesel Particulate Filter) Tested on a Fleet of Peugeot 607 Taxis: Final Results
Jeuland, N. / Dementhon, J. B. / Gagnepain, L. / Plassat, G. / Coroller, P. / Momique, J. C. / Belot, G. / Dalili, D. | 2004
23
2007-01-0009 Ion Current Sensing in an Optical HCCI Engine with Negative Valve Overlap
Larsson, M. / Denbratt, I. / Koopmans, L. | 2008
24
2006-01-0196 Soot Structure in a Conventional Non-Premixed Diesel Flame
Tao, F. / Foster, D. E. / Reitz, R. D. | 2007
24
Modal Measurement of Raw Exhaust Volume and Mass Emissions by SESAM
Baronick, J. / Heller, B. / Lach, G. / Luf, H. | 1998
24
AC Starting Demonstration with Allison AE2100 Turboprop Engine
Devred, H. / Besnard, J. P. / Martinez, M. | 1997
24
Roof Laser Welding in Series Production
Hanicke, L. / Strandberg, O. | 1993
24
Applying the Analytical Hierarchy Process to the Selection of Main Aircraft Batteries
Iden, D. J. | 1999
24
2003-01-0269 Lightweight Robotic Mobility: Template-Based Modelling for Dynamics and Controls Using ADAMS and MATLAB
Adamczyk, P. G. / Gorsich, D. / Hudas, G. | 2003
24
Computational Study of Aerodynamic Flows Inside Nozzles
Ramakrishnananda, B. / Damodaran, M. | 1994
24
2003-01-0122 A New Approach for Steering Wheel Angle Prediction
Lefebvre, N. / Millemann, S. / Lengelle, R. / Nikiforov, I. | 2003
24
2005-01-0462 Giant Magneto Resistors-Sensor Technology and Automotive Applications
Hammerschmidt, D. / Katzmaier, E. / Tatschl, D. / Granig, W. / Zimmer, J. / Vogelgesang, B. / Rettig, R. | 2005
24
2003-01-0190 Magnesium Die-Casting Alloy AJ62x with Superior Creep Resistance, Ductility and Die Castability
Pekguleryuz, M. / Labelle, P. / Argo, D. | 2003
24
2004-01-0136 Reliable Lightweight Fastening of Magnesium Components in Automotive Applications
Friedrich, C. | 2004
24
An Alternative to Hard Chrome Plating
Takada, J. | 1992
24
Evaluation of Some Alternative Diesel Fuels for Low Emissions and Improved Fuel Economy
Gardner, T. P. / Low, S. S. / Kenney, T. E. | 2001
24
A Pilot Study of Novel Hexavalent Chromium Removal from Chemical Film Rinse Water at General Dynamics - Fort Worth Division
Evanoff, S. P. / Kunka, M. / Stearns, P. M. | 1993
24
Classical Engine Design Calculations Using Spreadsheets
Erskine, A. / Hughes, A. / Lucas, G. G. / Ali, R. | 1996
25
2001-01-0015 Metrics in Software Development
Leveille, L. | 2001
25
Compact Lighting System
Prevost, A. | 1999
25
Digitally Controlled Fuel Metering Pump for Small Gas Turbine Engines
Krepec, T. / Labbate, A. / Taylor, M. | 1992
25
2004-01-1591 Experimental Investigation of the Scavenging Performance of a Two-Stroke Opposed-Piston Diesel Tank Engine
McGough, M. G. / Fanick, E. R. | 2004
25
Effects of CNBR Modification on Mode I Fracture of Epoxy Adhesives for Automotive Application
Tsuchida, M. / Naito, K. / Fujii, T. | 1996
26
The Effect of Catalyst Aging on the Composition of Gasoline Engine Hydrocarbon Emissions
Andersson, S. E. / Frestad, A. / Dempster, N. M. / Shore, P. R. | 1992
26
2000-01-0012 Direct Methanol Fuel Cells for Automotive Power Systems
Moore, R. M. | 2000
26
2005-01-2763 Role of Environmental Factors in Immunity and Infectious Disease Risk
Pierson, D. L. / Mehta, S. K. / Bruce, R. J. / Ott, C. M. | 2005
26
2006-01-2009 Commercialization of Silica-Titania Composites, a NASA Gray Water Post-Processor Technology, for Terrestrial Applications
Mazyck, D. W. | 2007
26
2001-01-0118 Displacement Measurements in the Hybrid III Chest
Butcher, J. / Shaw, G. / Bass, C. / Kent, R. / Crandall, J. | 2001
26
2003-01-0094 Architectural Challenges of an Electrical Distribution System in Prototype HEVs
Jaura, A. K. / Janarthanam, S. A. | 2003
26
Head Injury Risk Assessment for Forehead Impacts
Mertz, H. J. / Prasad, P. / Nusholtz, G. | 1996
26
2006-01-0063 Material Identification Using Successive Response Surface Methodology, With Application to a Human Femur Subjected to Three-Point Bending Loading
Untaroiu, C. / Kerrigan, J. / Crandall, J. | 2007
26
Testing Automotive Systems Modeled by Finite State Machines
Eckrich, M. J. / Kempf, G. G. / Rumpf, O. J. | 1994
26
A Study on Uniformity of Pre-Applied Lubricants from Mill Application to Draw Die
Zaccone, D. C. / Elko, R. G. / Hogarth, D. J. / Oltean, J. W. / Grimmett, M. W. / Shi, M. F. / Bodnar, J. J. / Grivna, J. M. | 1998
26
2007-01-0140 Software Integration for Simulation-Based Analysis and Robust Design Automation of HMMWV Rollover Behavior
Gunawan, S. / Papalambros, P. / Chan, K.-Y. / Brudnak, M. / Van den Bergh, G. | 2008
26
2005-01-0284 Door Interior Trim Safety Enhancement Strategies for the SID-IIs Dummy
Uduma, K. / Wu, J. / Bilkhu, S. / Gielow, M. / Kowsika, M. | 2005
27
Rapid Prototyping of Control Strategies for Embedded Systems
Lukich, M. S. / Barnes, T. E. / Maddock, J. B. | 1996
27
"GoldDrive"-Infinite Variable Drive Consisting of Fixed Displacement Pumps and Motors
Goldenberg, N. | 2000
27
2006-01-0004 Performance of Injection-Molded Natural Fiber-Hybrid Thermoplastic Composites for Automotive Structural Applications
Panthapuiakkal, S. / Law, S. / Sain, M. | 2007
27
Hot Isostatic Pressing of A356 and 380/383 Aluminum Alloys: An Evaluation of Porosity, Fatigue Properties and Processing Costs
Mashl, S. J. / Hebeisen, J. C. / Apelian, D. / Wang, Q. | 2000
27
Automated Guidance Control for Agricultural Tractor Using Redundant Sensors
Zhang, Q. / Reid, J. F. / Noguchi, N. | 1999
27
Hydrocarbon DeNOx Catalysis-System Development for Diesel Passenger Cars and Trucks
Klein, H. / Lopp, S. / Lox, E. / Kawanami, M. / Horiuchi, M. | 1999
27
Suppression of Mud Adhesion to the Rear Surface of a Van-Type Truck
Fujimoto, T. / Miyake, N. / Watanabe, Y. / Takeyama, T. | 1992
27
2004-01-1807 An Advanced Flight Control System for General Aviation Application
Steck, J. E. / Rokhsaz, K. / Pesonen, U. / Duerksen, N. | 2004
27
Aluminum Foam Applications for Impact Energy Absorbing Structures
Lorenzi, L. / Fuganti, A. / Todaro, E. / Fossat, E. | 1997
27
Predicting Product Manufacturing Costs from Design Attributes: A Complexity Theory Approach
Hoult, D. P. / Meador, C. L. | 1996
27
High-Resolution, Computer-Based Modeling, Simulation, and Validation of a Truck/Trailer Combination Model
Letherwood, M. D. / Gunter, D. D. | 1998
27
Modeling the Effects of Fuel Spray Characteristics on Diesel Engine Combustion and Emissions
Patterson, M. A. / Reitz, R. D. | 1998
27
2002-01-1337 Plasma Thermochemical Processing of Austenitic Stainless Steel for Combined Wear and Corrosion Resistance
Bell, T. / Li, C. X. | 2002
27
2002-01-1518 Contending with Airframe Icing
Perkins, P. J. / Ranaudo, R. J. | 2002
27
Combined Finite Element and Metallurgical Analyses of Piston Ring Groove Insert Retention Failures
Castleman, J. L. / Myers, M. R. | 1992
27
2004-01-0208 In-vehicle Network Verification from Application to Physical Layer
Pelz, G. / Schaefer, J. / Metzner, D. / Hell, M. / Opielka, A. | 2004
27
2005-01-0084 Bauschinger Effect Response of Automotive Sheet Steels
Han, K. / Van Tyne, C. J. / Levy, B. S. | 2005
28
2005-01-0528 Reliability Growth for Military Vehicles-Emerging Methodology and Remaining Challenges
Mortin, D. E. / Ellner, P. M. | 2005
28
Evaluation of Size and Shape of Shot Peening Media by Image Analysis
Gillespie, B. / Fowler, D. B. | 1992
28
Performance of Zinc-Nickel Alloy Electrodeposits as Affected by Internal Stress
Crotty, D. / Lash, R. / English, J. | 1999
28
Status of Bonded Boron/Epoxy Doublers for Military and Commercial Metallic Aircraft Structure
Belason, E. B. | 1996
28
2002-01-0142 Zero Hand Coding Approach for Controller Development
Saikalis, G. / Oho, S. / Zunft, S. | 2002
28
Evaluation of In-Line Adsorber Technology
Buhrmaster, C. L. / Locker, R. J. / Patil, M. D. / Nagel, J. N. / Socha, L. S. | 1997
28
2007-01-0035 Optimum Diesel Fuel for Future Clean Diesel Engines
Maly, R.R. / Schaefer, V. / Hass, H. / Cahil, G.F. / Rouveirolles, P. / Reoj, A. / Wegener, R. / Montagne, X. / Di Pancrazio, A. / Kashdan, J. | 2008
28
Pulsating and Oscillating Heat Transfer Devices in Acceleration Environments from Microgravity to Supergravity
Delil, A. A. M. | 2001
28
A Comparative Study on the Performance of Activated Carbon Canisters Using Different Purge Air Humidities
Fuher, M. J. / Farjo, A. A. / Ortiz, D. I. / Parker, M. K. | 1994
28
New Polypropylene Composite for Automotive Instument Panels
Shigeji Ichikawa / Arai, H. | 1992
28
Pilot Situation Awareness and Alerting System Commends
Pritchett, A. R. | 1998
29
2007-01-3070 Design and Performance of the Sorbent-Based Atmosphere Revitalization System for Orion
Ritter, J.A. / Reynolds, S.P. / Ebner, A.D. / Knox, J.C. / LeVan, M.D. | 2008
29
2003-01-0003 On the Applications of Low-Reynolds Cubic K-epsilon Turbulence Models in 3D Simulations of ICE Intake Flows
Bianchi, G. M. / Fontanesi, S. | 2003
29
2007-01-0397 Performance and Technology Comparison of GMR Versus Commonly Used Angle Sensor Principles for Automotive Applications
Granig, W. / Hartmann, S. / Koppl, B. | 2008
29
A Method for System Modelling and Partitioning in the Definition of Automotive Multiplex System Architectures
Stagnoli, P. / Borin, A. / Sivera, E. | 1993
29
2002-01-0054 Diesel Particulate Measurement with Partial Flow Sampling Systems: A New Probe and Tunnel Design That Correlates with Full Flow Tunnels
Silvis, W. M. / Marek, G. / Kreft, N. / Schindler, W. | 2002
29
2001-01-0077 Hot Dip Pure Zinc Galvanized and Iron-Zinc Galvannealed Coated Steel Sheets for External Car Body Panels
Mataigne, J.-M. | 2001
30
2004-01-0161 A Comprehensive Study of Door Slam
Iyengar, R. M. / Chang, T. / Laxman, S. / Thirupathi, S. / Powers, J. / Perumalswani, S. | 2004
30
The Gold Plating of Molybdenum Conductor Pins in Semi-Rigid Coaxial Cables on Navy Aircraft
Perry, S. M. | 1993
30
Commercial Rechargeable Batteries for Military Aircraft Applications: An Overview
Erbacher, J. K. | 1997
30
2007-01-0342 Impact-Dependent Properties of Advanced and Ultra-High-Strength Steels
Walp, M.S. | 2008
30
Changing I/M Performance Objectives
Cagle, G. / Probst, C. O. | 1997
30
2003-01-0124 ACE Driving Simulator and Its Applications to Evaluate Driver Interfaces
Bhise, V. / Smid, E. / Dowd, J. | 2003
30
2002-01-0078 Metal Quality-The Effects on Die Casters and End Users
Bakke, P. / Svalestuen, J. M. / Albright, D. | 2002
30
GV Heated Cabin Window-Design, Testing, and Certification
Simmons, F. / Whittle, J. | 2000
30
2004-01-0246 Actual Recyclability of Selected Honda Vehicles
Paul, R. T. / Chung, D. / Raney, D. W. | 2004
30
2006-01-0140 Target Tracking by a Single Camera Based on Range-Window Algorithm and Pattern Matching
Miyahara, S. / Sielagoski, J. / Koulinitch, A. / Ibrahim, F. | 2007
30
New Generation of Intelligent Wheel Speed Sensors for ABS Application
Pusch, S. | 2000
30
2006-01-2015 ISS Expeditions 10 & 11 Potable Water Sampling and Chemical Analysis Results
Straub, J. E. / Plumlee, D. K. / Schultz, J. R. | 2007
30
2003-01-0191 A Comparative Study of New Magnesium Alloys Developed for Elevated Temperature Applications in Automotive Industry
Aghion, E. / Bronfin, B. / Von Buch, F. / Schumann, S. / Friedrich, H. | 2003
31
2003-01-0041 Diesel Exhaust Emissions Control for Light-Duty Vehicles
Mital, R. / Li, J. / Huang, S. C. / Stroia, B. J. / Yu, R. C. / Anderson, J. A. / Howden, K. | 2003
31
Embedded Neural Networks in Real Time Controls
Stone, M. L. | 1994
31
Hydrocarbon Emissions of SI Engines as Influenced by Fuel Absorption-Desorption in Oil Films
Gatellier, B. / Trapy, J. / Herrier, D. / Quelin, J. M. | 1993
31
2003-01-2130 Overview of Icing Physics Relevant to Scaling
Anderson, D. N. / Tsao, J.-C. | 2003
31
Qualification of a Low-Volatile Organic Chemical Solvent for Cleaning Prior to Lightning Protection Plating
Bauccio, M. L. | 1993
31
Adaptive Light Control - A New Light Concept Controlled by Vehicle Dynamics and Navigation
Loewenau, J. P. / Bernasch, J. H. / Rieker, H. G. / Venhovens, P. J. T. / Huber, J. P. / Huhn, W. / Reich, F. M. | 1999
31
2001-01-0016 Software Quality and European Law
Ellims, M. | 2001
31
2003-01-1096 Issues on Load Availability and Reliability in Vehicular Multiplexed and Non-Multiplexed Wiring Harness Systems
Masrur, M. A. / She, J. / Richardson, P. | 2003
32
2007-01-0141 Finite Element Modelling and Analysis of Hydro Gas Suspension System for Temperature Rise Behavior
Rabibunnisa, H. / Akilandeswari, P. | 2008
32
2000-01-0013 Advanced Catalyst Systems for Mobile PEMFC Applications-The Challenge of Carbon Monoxide
Starz, K. A. / Auer, E. / Baumann, F. / Lehmann, T. / Wieland, S. / Zuber, R. | 2000
32
2001-01-0121 A Headform Development for Neck Calibrating Tests of the SID-IIs Side Impact Dummy
Zhao, Y. / Salloum, M. J. / Kottur, S. / Moss, S. / Zhu, J. Y. | 2001
32
Innovative Design and Ballistic Performance of Lightweight Composite Integral Armor
Gama, B. A. / Gillespie, J. W. / Bogetti, T. A. / Fink, B. K. | 2001
32
An Overview of Neural Network and Fuzzy Logic Applications to Earthmoving Machine Systems Control
Prabhu, S. M. | 1999
32
2004-01-1133 The Optimum Cell Density for Wall-Flow Monolithic Filters: Effects of Filter Permeability, Soot Cake Structure and Ash Loading
Konstandopoulos, A. G. / Kladopoulou, E. | 2005
33
2003-01-0095 Sensor-Less Position Control System for Memory Seat
Ishikawa, H. / Kanie, H. / Katoh, H. / Kimura, N. | 2003
33
In-Vehicle Accelerator System Performance Measurement Machine
Greenbaum, J. J. / Nowakowski, R. / Racenis, K. I. | 1996
33
2007-01-0105 CFD-Based Robust Optimization of Front-End Cooling Airflow
Singh, R. / Shen, F. | 2008
33
Development of a Technology Guidance Document for Composite Repair to Metallic Structure
Hillman, T. | 1996
33
2006-01-0005 The Effect of Fiber Surface Treatment on the Performance of Hemp Fiber/Acrylic Composites for Automotive Structural Parts
Behzad, T. / Sain, M. | 2007
33
2005-01-0011 Developing Hydrogen (H~2) Specification Guidelines for Proton Exchange Membrane (PEM) Fuel Cell Vehicles
Papasavva, S. / Sloane, C. / Voecks, G. / Sims, R. / Ohi, J. / Wagner, F. / Androsky, A. / Collins, W. / Siddiqui, S. / Wessel, S. | 2005
33
Fuel Permeation Rates of Elastomers After Changing Fuel
Stevens, R. D. / Fuller, R. E. | 1997
33
Autoignition of Methane and Natural Gas in a Simulated Diesel Environment
Fraser, R. A. / Siebers, D. L. / Edwards, C. F. | 1992
33
Effects of Steel Surface Texture on Appearance After Painting
Bastawros, A. F. / Speer, J. G. / Zerafa, G. / Krupitzer, R. P. | 1993
33
2004-01-1592 Turning Control and Analysis for a Tracked Vehicle with Electric Transmission System
Zhang, Y. / Ge, Y. / Zang, K. / Ma, X. / Li, H. | 2004
33
2006-01-0044 Electromagnetic Fully Flexible Valve Actuator
Cope, D. / Wright, A. | 2007
33
Effects of Multiple Injections and Flexible Control of Boost and EGR on Emissions and Fuel Consumption of a Heavy-Duty Diesel Engine
Montgomery, D. T. / Reitz, R. D. | 2001
33
Development of Turbocharger for Improving Passenger Car Acceleration
Watanabe, T. / Koike, T. / Furukawa, H. / Ikeya, N. / Sakakida, M. | 1996
34
2005-01-0089 A Comparative Study of Dent Resistance Incorporating Forming Effects
Zeng, D. / Xia, Z. C. | 2005
34
Horsepower with Brains: The Design of the CHIRON Free Piston Engine
Achten, P. A. J. / van den Oever, J. P. J. / Potma, J. / Vael, G. E. M. | 2000
34
Driver Model of Steering Based on Target Position and Orientation
Yoon, Y. S. / Cho, Y. G. / Dingus, T. | 1996
34
Crank-Angle Domain Modeling and Control for Idle Speed
Yurkovich, S. / Simpson, M. | 1997
34
Design and Operation of a New Vehicle Suspension Kinematics and Compliance Facility
Best, T. / Neads, S. J. / Whitehead, J. P. / Willows, I. R. | 1997
34
Using the MC68332 TPU to Implement the J1850 Protocol
Beyeler, B. / Langley, T. | 1994
34
Enhancement of Combustion by Injection of Radicals
Murase, E. / Hanada, K. | 2000
34
Combustion Improvement of Heavy-Duty Methanol Engine by Using Autoignition System
Tsuchiya, K. / Seko, T. | 1996
34
2004-01-0209 High Performance and Cost-Effective Electronic Controller Architecture for Powertrain Systems
Sakurai, K. / Kanekawa, N. / Tsunedomi, K. / Sasaki, S. / Oyama, K. / Yokoyama, T. / Watabe, M. | 2004
34
2005-01-2766 Space Laboratory on a Tabletop-A Next-Generation ECLSS Design and Diagnostic Tool
Ramachandran, N. / Perry, J. | 2005
34
Development of a Hard Surfacing Process for the Inner Bores of Aluminum Engines
Shinoda, T. / Mizuno, Y. | 2000
34
2005-01-0287 Side Impact Injury Risk for Belted Far Side Passenger Vehicle Occupants
Gabler, H. C. / Digges, K. / Fildes, B. N. / Sparke, L. | 2005
35
Nickel Meta Hydride Aircraft Battery
Klein, M. / Lytle, T. | 1999
35
Propeller Installation and Certification Considerations for Small Aircraft
Meyer, B. E. | 2000
35
2005-01-0530 Application of Reliability-Based Design Optimization to Durability of Military Vehicles
Choi, K. K. / Tang, J. / Hardee, E. / Youn, B. D. | 2005
35
Maps of Discharge Coefficients for Valves, Ports and Throttles
Blair, G. P. / Callender, E. / Mackey, D. O. | 2002
35
Fluid Dynamic and Acoustic Modeling of Concentric-Tube Resonators/Silencers
Morel, T. / Morel, J. / Blaser, D. A. | 1992
35
Modeling Steady-State Suspension Kinematics and Vehicle Dynamics of Road Racing Cars - Part II: Examples
Crahan, T. C. | 1996
35
Combination of Hydraulic Multipoint Cushion System and Segment-Elastic Blankholders
Siegert, K. / Hohnhaus, J. / Wagner, S. | 1998
35
Simulation of a Continuously Variable Power Split Transmission
Lu, Z. / Thompson, G. J. / Mucino, V. H. / Smith, J. E. | 1999
35
Real-Time Analysis of Particulate Matter by Flame Ionization Detection
Terunao / Kawai / Iuchi, Y. / Nakamura, S. / Ishida, K. | 1998
35
2004-01-0074 Results from a 1/4 Million km, Heavy-Duty Truck Trail, Using FBC Regenerated DPFs
Richards, P. / Kalischewski, W. | 2004
35
2007-01-0015 Lean Burn Versus Stoichiometric Operation with EGR and 3-Way Catalyst of an Engine Fueled with Natural Gas and Hydrogen-Enriched Natural Gas
Saanum, I. / Bysveen, M. / Tunestal, P. / Johansson, B. | 2008
36
A CFD Study of Squeeze Film
Kumar, K. / Desai, C. / Flinn, M. | 1994
36
Manpower, Personnel, and Training Analysis in Aerospace System Development
Dahn, D. A. / Sorenson, H. B. | 1994
36
2007-01-3083 Thermal Assessment of Swift Instrument Module Thermal Control System During First 2.5 Years in Flight
Choi, M.K. | 2008
36
Cycle Life and Failure in the Nickel-Metal Hydride Battery
Wasz, M. L. | 1997
36
2006-01-0065 OOP Response of THOR and Hybrid-III 50th% ATDs
Kang, J. / Nusholtz, G. / Agaram, V. | 2007
36
Mechanical Design and Control of the Pendubot
Block, D. J. / Spong, M. W. | 1996
36
The Relationship Between the Complexity of Linear Models and the Utility of the Computed Results
Lund, Y. I. / Bernard, J. E. | 1993
36
Cancellation of Unknown Angular Rate Effects in Linear G Sensitivity Testing for Angular Rate Sensors
Kong, H. / Betts, A. | 2000
36
Dynamic Characteristics Analysis of Brake Pipings
Ogino, H. / Shiokawa, S. / Yamaguchi, H. | 1992
36
Passive Regeneration of Catalyst Coated Knitted Fiber Diesel Particulate Traps
Mayer, A. / Emig, G. / Gmehling, B. / Popovska, N. / Hoelmann, K. / Buck, A. | 1996
36
Fuel Transport Characteristics of Spark Ignition Engines for Transient Fuel Compensation
Shayler, P. J. / Teo, Y. C. / Scarisbrick, A. | 1996
37
Examining the Trade-Off Between Automobile Acceleration Performance and Fuel Economy
McConville, G. P. / Cook, H. E. | 1996
37
The Key Advantages of the Plasma-Powder Spray Process for the Thermal Spray Coating of Cylinder Bores in Automotive Industry
Wuest, G. / Barbezat, G. / Keller, S. | 1997
37
2002-01-0079 New Aspects of Temperature Behavior of AJ52x, Creep Resistant Magnesium Alloy
Labelle, P. / Pekgularyuz, M. / Lefebvre, M. / Bouchard, R. | 2002
37
2003-01-0208 Comparative Ecological Analysis of Construction and Materials, Applied for Dash Fascia, Front and Rear Bumpers of Different LADA Cars
Petrov, R. L. / Kabanova, O. N. / Golyakov, V. V. | 2003
37
The Effect of Alternative Fuels on Fluorosilicone Elastomers
Virant, M. S. / Fiedler, L. D. / Knapp, T. L. / Norris, A. W. | 1992
37
Simulation of a 3-Wheeled All Terrain Vehicle (ATV) Transient and Steady-State Handling Characteristics
Lim, P. T. / Renfroe, D. A. | 1993
37
2004-01-1816 Further Application of the Mass Loss Model to the GLC-305 and MS(1)-317 Airfoils
Tan, S. C. | 2004
37
2001-01-0078 High Strength Steels for Automotive Safety Parts
Comette, D. / Hourman, T. / Hudin, O. / Laurent, J. P. / Reynaert, A. | 2001
37
Adaptive Headlamp: A Contribution for Design and Development of Motorway Light
Manassero, G. / Dalmasso, M. T. | 1999
37
2002-01-0143 Inductances of Automotive Electromagnetic Devices
Silvus, H. S. / White, R. E. | 2002
37
2002-01-1338 Basic Principals, Properties and Metallurgy of Intensive Quenching
Aronov, M. A. / Kobasko, N. I. / Powell, J. A. | 2002
38
The Evolution of Composite Patch Repair Technology at CTAS in Meeting the Challenges of the C141-B Drop-In-Repair Program for WRALC
Sivam, T. P. / Edwards, D. / Mason, S. / Guy, P. | 1996
38
2006-01-0006 Effect of Fungal Modification on Fiber-Matrix Adhesion in Natural Fiber-Reinforced Polymer Composites
Gulati, D. / Sain, M. | 2007
38
2000-01-0181 Ways to Meet Future Emission Standards with Diesel Engine Powered Sport Utility Vehicles (SUV)
Zelenka, P. / Egert, M. / Cartellieri, W. | 2000
38
2001-01-1706 Nanofluids for Vehicle Thermal Management
Choi, S. U. S. / Yu, W. / Hull, J. R. / Zhang, Z. G. / Lockwood, F. E. | 2002
38
2004-01-1739 Effects of Tire and Vehicle Design Characteristics on Rollover of Tractor Semi-Trailers
Law, E. H. / Janajreh, I. | 2004
38
2003-01-0098 An Architecture for Electronic Throttle Control Systems
Costin, M. / Schaller, R. / Maiorana, M. / Purcell, J. / Simon, R. / Bauerle, P. / Stockbridge, J. | 2003
38
2001-01-0019 Software Lessons Learned the Hard Way
Weinfurther, J. M. / Fenderson, A. E. / King, D. M. / Brombach, R. P. | 2001
39
Electrochemical Stability of Composite Electrolytes for Lithium Rechargeable Batteries
Kumar, B. / Scanlon, L. G. | 1998
39
2003-01-0128 A Study of the Effect of Varying Visual Occlusion and Task Duration Conditions on Driver Behavior and Performance While Using a Secondary Task Human-Machine Interface
Weir, D. H. / Chiang, P. / Brooks, A. M. | 2003
39
Fault Management in the Time Triggered Protocol (TTP)
Kopetz, H. | 1994
39
Spark Plug Fouling: a Quick Engine Test
Quader, A. A. / Dasch, C. J. | 1993
39
Part-Task Simulator for Truck Transmission Gear Shifting
Nellums, R. / Mazur, J. / Smith, S. | 1996
39
910854 Separation Techniques for Auto Shredder Residue
Bonsignore, P. V. / Jody, B. J. / Daniels, E. | 1992
39
2007-01-0352 Experimental Correlation Between the Road Roughness and the Comfort Perceived in Bus Cabins
Fichera, G. / Scionti, M. / Garesci, F. | 2008
40
An Environmentally Acceptable Paint Stripping System
Rich, C. / Boyle, P. | 1992
40
2003-01-1379 A Smart, Integrated Battery Analysis and Control System with Wireless Communication
Hnatczuk, W. / Nowak, D. K. / Solies, P. U. | 2003
40
The Impact of Retrofit Exhaust Control Technologies on Emissions from Heavy-Duty Diesel Construction Equipment
Ainslie, B. / Rideout, G. / Cooper, C. / McKinnon, D. | 1999
40
2007-01-0106 Large Eddy Simulation of Unsteady Flow Around a Formula Car on Earth Simulator
Tsubokura, M. / Kitoh, K. / Oshima, N. / Nakashima, T. / Zhang, H. / Onishi, K. / Kobayashi, T. | 2008
40
2004-01-0248 Translating Environmental Legislation Into the Engineering Design Domain
Makri, C. / Roy, R. / Sackett, P. J. | 2004
40
Fastening Characteristics of Fiberglass Reinforced S/MA Copolymers in Instrument Panel Substrates
Hoy, R. V. | 1992
40
2005-01-0018 Stochastic Limit Control and Its Application to Knock Limit Control Using Ionization Feedback
Zhu, G. G. / Haskara, I. / Winkelman, J. | 2005
40
A Study on Combustion Behavior of a Diesel Fuel Spray Impinging on a Wall
Tomonaga, T. / Murai, K. / Takano, T. / Sami, H. | 1996
40
2005-01-0555 On Automatic Transmission Integrated TCM With Contact Less Position Sensor
Ogasawara, N. / Taniguchi, T. / Tsukamoto, K. / Suzuki, K. / Hattori, Y. / Murakami, N. / Maruyama, H. | 2005
40
The Influence of Steel Coating Type and Galvanneal Coating Structure on Electrocoat Primer Paintability
James, J. M. / Vincent, J. J. | 1999
40
Cosmetic Corrosion of Aluminum Closure Panels: Lab Testing Versus Field Performance
Courval, G. J. / Allin, J. | 2000
40
2003-01-0042 NO~x Adsorber Aging on a Heavy-Duty On-Highway Diesel Engine-Part One
Schenk, C. / Laroo, C. | 2003
41
Thermal Management Concepts for Higher-Efficiency Heavy Vehicles
Wambsganss, M. W. | 1999
41
Vehicle Electronic System Architectures-Influences and Guidelines
Millward, J. P. | 1993
41
2006-01-0201 Speciated Hydrocarbon Emissions From an Automotive Diesel Engine and DOC Utilizing Conventional and PCI Combustion
Bohac, S. V. / Han, M. / Jacobs, T. J. / Lopez, A. J. / Assanis, D. N. / Szymkowicz, P. G. | 2007
41
Exfoliation Corrosion Located by Search Peening
Diepart, C. P. / Thompson, E. R. / Harrison, J. | 1996
41
Fuel and Additive Influence on the Ion Current
Reinmann, R. / Saltzkoff, A. / Lassesson, B. / Strandh, P. | 1998
41
Effects of Vehicular Air Filter Housing Configuration and Filter Resistance on Filter Flow Distributions and Filtration
Al-Sarkhi, A. / Yao, S. / Chambers, F. W. | 1999
41
Algorithm Concepts for Rollover Detection to Activate Advanced Restraint Systems
Frimberger, M. / Wolf, F. / Glaser, T. / Zechmair, D. / Achhammer, G. | 2000
41
2005-01-2768 Analysis of the Effect of Age on Shuttle Orbiter Lithium Hydroxide Canister Performance
McCloud, P. L. / Dunaway, B. R. / Graf, J. C. / Stephenson, C. A. | 2005
41
2005-01-0094 Numerical Investigation Into the Effects of Bending Boost and Hydroforming End-Feed on the Hydroformability of DP600 Tube
Bardelcik, A. / Worswick, M. J. | 2005
42
The Phenomena of Flame Propagation in a Cylindrical Combustion Chamber with a Swirling Mixture
Gorczakowski, A. / Jarosinski, J. | 2000
Feedback