Datenquellen im TIB-Portal   Hilfe zur Suche

Unser Tipp: Melden Sie sich an, um alle Funktionen im TIB-Portal optimal nutzen zu können!

Formation of New Glass-Veramic Materials with Controllable Dielectric and Magnetic Properties (Englisch)

In: New materials and technologies in mechanical engineering   ;  2019

Wie erhalte ich diesen Titel?

Die Inhaltsverzeichnisse werden automatisch erzeugt und basieren auf den im Index des TIB-Portals verfügbaren Einzelnachweisen der enthaltenen Beiträge. Die Anzeige der Inhaltsverzeichnisse kann daher unvollständig oder lückenhaft sein.

3
Structure Diagnostic of Iron-Based Out-of-Peritectic Alloys during Nonequilibrium Crystallization
Le, C. D. / Savelyev, K. D. / Golod, V. M. | 2019
11
The End-to-End Simulation of Semi-Continuous Casting and Subsequent Hot Rolling with Account of Microstructure
Erisov, Y. A. / Surudin, S. / Bobrovskij, I. N. / Jiang, C. P. / Khamrayev, B. | 2019
16
Research of the Causes of the Defect "Sliver" on the Inner Surface of the Steel Pipe Strength Category X70
Kovalev, P. V. / Ryaboshuk, S. V. / Zhitenev, A. I. / Kulikov, V. | 2019
23
Filtration Permeability of Dendritic Structure in Condition of Diffusion-Capillary Coalescence of Secondary Side Branches
Kim, A. E. / Dobosh, L. J. / Golod, V. M. | 2019
30
Phosphorus Removal Options at Induction Melting of Steel
Karasev, V. P. / Ryaboshuk, S. V. / Kovalev, P. V. / Kulikov, V. | 2019
37
Modification of Nitrogen-Containing High-Chromium Steels by Nanosized Lanthanum Hexaboride
Kolpishon, E. Y. / Razumova, L. V. / Ryaboshuk, S. V. | 2019
44
Formulas for the Calculation of Temperatures and Concentrations of Carbon Responsible to the Parar Equilibrium of the Main Phases in Medium Sheet Steels
Zhitelev, P. / Serzhenko, D. | 2019
53
Homogenization of Cr-Ni Austenitic Steel Studying: Liquation and Microhardness Heterogeneity Equalization
Tsvetkov, A. S. / Teplukhina, L. V. | 2019
60
Cast Austenitic Steels for Cryogenic Technology
Ermakov, B. / Vologzhanina, S. A. / Bobrovskij, S. M. / Lukyanov, A. A. / Lee, R. | 2019
66
Numerical Simulation of Hot High Strain Rate Torsion Tests for Al-Based Alloys
Naumov, A. / Borisov, A. / Doroshchenkova, A. Y. | 2019
72
General Experimental Method of Research of Anisotropy of Conductive Materials
Baryshev, G. K. / Barzov, A. A. / Biryukov, A. P. / Kondrateva, A. S. / Tutnov, I. A. | 2019
79
Effect of Microstructure and Impact Toughness, on the Character of the Destruction of Main Oil and Gas Pipelines
Doroshchenkova, A. Y. | 2019
87
Application of Innovational Sc-Containing Alloys in Shipbuilding
Gogolukhina, M. / Mamedova, L. / Scholtz, O. | 2019
94
Effect of Severe Plastic Deformation on the Structure and Properties of the Aluminum Alloy System Al-Cu-Mg
Paitova, O. V. / Bobruk, E. V. / Shasherina, S. / Zhang, B. F. | 2019
101
Improving the Properties of Aluminum Alloy System Al-Cu-Mg, Subjected to Hardening and Severe Plastic Deformation
Paitova, O. V. / Bobruk, E. V. / Skotnikova, M. A. / Wu, J. Y. | 2019
109
Joining of Titanium and its Alloys with Aluminum Alloys by Friction Stir Welding
Rzaev, R. / Chularis, A. / Rybakov, A. | 2019
117
The Obtaining Layered Composite Materials that Contain Rare Earth Element
Burlova, A. N. / Isupov, F. Y. / Kotov, S. A. / Livintsova, M. G. | 2019
122
Temperature Influence on Microstructure and Properties Evolution of Friction Stir Welded Al-Mg-Si Alloy
Naumov, A. / Morozova, I. / Isupov, F. Y. / Golubev, I. / Mikhailov, V. | 2019
129
Comparison of Porosity Evaluation Methods Using the Example of Dissimilar Metal Joints
Kurushkin, D. / Mushnikov, I. / Rylkov, E. / Isupov, F. Y. / Panchenko, O. / Golubev, I. | 2019
137
The Method for Determining the Friction Coefficient in Relation to the Hot Forging Processes
Khaimovich, A. I. / Erisov, Y. A. / Surudin, S. / Petrov, I. / Jiang, C. P. / Strackbein, I. | 2019
144
Improving the Quality of Parts Produced by Bending in a Die with an Elastic Element
Nesterenko, E. / Volgushev, A. / Frese, K. | 2019
150
Investigation of the Hammer Forging Process of Large-Sized Turbine Blades of Stainless Steel
Smirnov, M. O. / Chizhik, T. A. / Zolotov, A. M. | 2019
159
Hot Axial Rotary Forging of Flanges Standard EN 1092
Aksenov, L. B. / Kunkin, S. / Potapov, N. M. | 2019
165
Researching Conditions of Thermomechanical Process under Semihot Forging
Radkevich, M. M. / Fomin, D. / Gluchihin, A. | 2019
171
Influence of Contact Friction on the Kinematics of Metal Flow during Equal Channel Angular Pressing
Parshikov, R. A. / Zolotov, A. M. | 2019
178
Determination of Boundary Parameters of Pipelines Elbows Blanking Elements Made from Titanium Alloy Ti-4Al-2Mn and Steel AISI 304
Nokolenko, K. / Nikolenko, K. / Zvonov, S. / Lopatina, A. | 2019
185
Mechanical Properties of Bars Produced by Hot Extrusion of Magnesium Shavings
Karzina, M. Y. Zamozdra. J. S. / Perminova, A. | 2019
195
Manufacturing and Properties of Radiation Resistance Aluminum Alloys and Composites with Addition of Gadolinium
Kosnikov, G. A. / Kalmykov, A. V. / Bespalov, E. N. | 2019
202
Effect of Nanocarbons Additions on the Microstructures and Properties of Copper Matrix Composite by Spray Drying Process
Ji, P. G. / Qi, D. D. / Yin, F. X. / Wang, G. K. / Bobrynina, E. / Tolochko, O. | 2019
208
Investigation and Characterization of New Polyimide Powder for Selective Laser Sintering
Vaganov, G. / Didenko, A. / Ivan’kova, E. / Popova, E. / Kuznetsova, T. / Kobykhno, I. / Yudin, V. | 2019
215
Friction and Wear Characteristics of UD Thermoplastic Tape Based Nanocomposites with Fullerene Soot
Kobykhno, I. / Honcharenko, D. / Li, H. Y. / Steshenkov, A. L. / Xu, J. B. / Yadykin, V. | 2019
224
Investigation by TGA, DSC and DMA Urethane-Imide Copolymers with High Content of Hard Imide Blocks
Didenko, A. / Smirnova, V. / Popova, E. / Vaganov, G. / Ivanov, A. / Kuzmenko, E. / Kuznetsova, T. / Kudryavtsev, V. | 2019
230
Si Nanopowder Based Anode Material for the Lithium Ion Battery Cell
Morozov, A. V. / Semencha, A. / Freidin, A. B. / Müller, W. H. / Dronova, M. G. | 2019
239
Research of the Possibility of Obtaining a Foam System of Aluminum - Carbon Nanotubes Using a High-Temperature Foam Agent
Karzina, J. S. / Zamozdra, M. Y. / Hootak, M. | 2019
244
Effect of High Energy Ball Milling Washing Process on Properties of Nd2Fe14B Particles Obtained by Reduction-Diffusion
Galkin, V. / Haider, K. / Ahn, J. B. / Kim, D. S. | 2019
252
The Technology of Producing Layered Composite Materials on the Basis of Hypoeutectic Silumin AK9ch and Sintered Iron Powder AHC100.29
Kuznetsov, R. V. / Radkevich, M. M. / Kuznetsov, P. A. | 2019
258
Consolidation Behavior of the Cu-Al2O3 Nanocomposite Powder
Lee, P. G. Ji, D. W. / Vasilyeva, E. S. | 2019
264
General Method of Research of Electrophysical Properties of Nanostructured Composites
Kondrateva, G. K. Baryshev, A. V. Berestov, A. N. Tokarev, A. S. / Chernykh, P. O. | 2019
270
Obtaining a Hard Alloy Powder from a Worn-Out Tools with a Subsequent Use for Pressing Rods
Kotov, S. A. / Avramishin, B. V. / Fedorov, E. M. | 2019
277
Comparison of Supermacroporous Polyester Matrices Fabricated by Thermally Induced Phase Separation and 3D Printing Techniques
Stepanova, M. / Eremin, À. / Averianov, L / Gofman, I. / Lavrentieva, A. / Korzhikov-Vlakh, V. / Korzhikova-Vlakh, E. | 2019
284
The Research and Development of the Technology for Pressure Treatment of the Thermally Expanded Graphite Powders
Kotov, S. A. / Muzafarova, S. V. R. / Livintsova, M. G. | 2019
291
Correlation of Nonuniformities of the Seebeck Coefficient's Distribution and the Strain-Stress State in Extruded Thermoelectric Material
Rulimov, A. A. / Kuzavkova, D. D. / Nemov, S. A. / Zolotov, A. M. | 2019
298
Nanostructural Composites in the WC/ZrO2 (Y2O3) System
Golub, A. V. / Semenov, O. V. / Gurtovoy, V. N. | 2019
304
Obtaining Spherical Powders of Grade 5 Alloy for Application in Selective Laser Melting Technology
Ozerskoi, N. E. / Wang, Q. S. | 2019
311
Synthesis of the In Situ Nb-Si Composites by Binder Jetting Additive Manufacturing Technology
Goncharov, I. S. / Hisamova, L. V. / Saubanova, L. Y. / Polozov, L. A. / Wang, Q. S. | 2019
320
Aerosol-Assisted Chemical Deposition of Nanocomposite Material in the "Iron-Carbon-Oxygen" System
Tyurikova, I. / Aleksandrov, S. E. / Tyurikov, K. / Iankevich, G. A. | 2019
327
Research of Regularities of Aerosol Synthesis of Iron Oxide Particles
Chapalda, E. N. / Aleksandrov, S. E. / Kucal, E. | 2019
334
Synthesis and Study of Nanocrystalline Mg2SiO4 Powder and Yttrium Aluminum Garnet
Bochagina, A. Semencha, E. V. / Dronova, M. G. | 2019
343
Agricultural By-Products as Advanced Raw Materials for Obtaining Modifiers and Fillers for Epoxy Materials
Gotlib, E. / Nya, H. P. T. / Nguyen, T. L. A. / Sokolova, A. G. / Yamaleeva, E. / Musin, I. N. | 2019
350
Wood - Polymer Composites Assessment Using Microtomography
Volfson, LN. Musin, LZ. Fayzullin, S. I. / Yuferev, R. | 2019
355
Effect of Processing and Radiation Exposure on the Structure and Properties of Polypropylene
Lisanevich, M. S. / Galimzyanova, R. Y. / Rakhmatullina, E. P. / Khakimullin, Y. N. / Musin, LN. / TsareVa, E. E. | 2019
362
Investigation of Composite Materials Impact Damage by a Computer Tomography
Bezzametnov, O. N. / Mitryaykin, V. I. / Khaliulin, V. I. / Statsenko, E. O. | 2019
373
Influence of Powder Condition on Surface Properties of Cold-Resistant High-Strength Steel Produced by Direct Laser Deposition Method
Korsmik, R. S. / Alekseeva, E. / Breki, A. | 2019
381
Application Development for the Evaluation of Penetration in Laser and Laser-Arc Hybrid Welding of Tee and Corner Joints
Udin, I. N. / Voropaev, A. A. / Unt, A. | 2019
389
Phase and Structural Transformations in Heat Resistant Alloys during Direct Laser Deposition
Buczak, N. / Hassel, T. / Kislov, N. G. / Klimova-Korsmik, O. G. / Turichin, G. A. / Magerramova, L. A. | 2019
396
Measurement of Thermal Cycle at Multi-Pass Layer Build-Up with Different Travel Path Strategies during DLMD Process
Strasse, S. Stankevich. A. Gumenyuk. A. / Rethmeier, M. | 2019
404
Research of Effect of the Powder Material Quality in the Structure Formation of the Inconel 718 Samples
Silchonok, S. S. / Zadykyan, G. G. / Zotov, O. G. / Morozova, I. N. | 2019
410
Effect of Process Parameters on Microstructure and Mechanical Properties of Direct Laser Deposited Cold-Resistant Steel 09CrNi2MoCu for Arctic Application
Mendagaliev, R. V. / Ivanov, S. Y. / Petrova, S. G. | 2019
418
Research of Mechanical Properties of Cold Resistant Steel 09CrNi2MoCu after Direct Laser Deposition
Shirokina, Y. A. Bistrova. E. A. / Mendagaliev, R. V. / Gushchina, M. O. / Unt, A. | 2019
425
Analysis of the Source Type Influence on the Structure Forming during Aluminum Wire-Feed Laser Deposition
Silchonok, S. S. / Kislov, N. G. / Zotova, A. O. / Shamshurin, A. I. / Klimova-Korsmik, O. G. | 2019
431
An Analytical Model for Filler Wire Heating and Melting during Wire Feed Laser Deposition
Mukin, D. V. / Ivanov, S. Y. / Valdaitseva, E. A. / Turichin, G. A. / Beniash, A. E. | 2019
438
Modeling of the Formation Process of the Coherent Intermetallides in Nickel Alloys during Laser Treatment
Alekseev, A. V. / Valdaitseva, E. A. / Aleksandrov, V. L. | 2019
445
Effect of Inter-Layer Dwell Time on Distortion and Residual Stresses of Laser Metal Deposited Wall
Ivanov, S. Y. / Vildanov, A. / Golovin, P. A. / Artinov, A. / Karpov, I. | 2019
452
Current Design Rules for Welding of Wind Energy Structures for Arctic Conditions
Lopaev, S. / Layus, P. / Kah, P. / Parshin, S. | 2019
459
Feasibility Study of Hybrid Laser Arc Welding Application in Shipbuilding
Gogolukhina, M. / Mamedova, L. / Scholtz, O. / Firsova, A. | 2019
467
Structure and Phase Composition of Ti-6AI-4V Samples Produced by Direct Laser Deposition
Shalnova, S. A. / Panova, G. / Buczak, N. | 2019
473
Comparison of Titanium Powders and Products Manufactured by the Direct Laser Deposition Method
Gushchina, M. O. / Shalnova, S. A. / Gerasimov, N. I. / Lebedeva, N. V. / Klimov, G. G. | 2019
481
Investigation of Crystallization Process of a Single Crystal Nickel-Based Alloy during the Laser Multilayer Cladding
Korsmik, R. S. / Turichin, G. A. / Zadykyan, G. G. / Zhitenev, A. I. | 2019
489
Manufacture of a High-Pressure Centrifugal Fan Made of 3161 by the Method of High-Speed Direct Laser Deposition
Topalov, I. K. / Golovin, P. A. / Lanin, A. A. / Gerasimov, N. I. | 2019
496
Research of the Treatment Parameters Effects on the Layer Formation during Wire-Feed Laser-TIG Deposition with Aluminum Alloy
Somonov, V. V. / Tsibulskiy, I. A. / Kislov, N. G. / Lanin, A. A. | 2019
504
Research of the Structure Defects at Wire-Feed Laser and Laser-Arc Deposition with AIMg6
Voropaev, A. A. / Akhmetov, A. D. / Hassel, T. / Klimov, G. G. | 2019
512
Features of Laser Welding Light Constructions from Cryogenic Austenitic Steel 316L
Larin, M. Kuznetsov, M. / Sorokin, A. | 2019
520
Laser Cladding of Heat-Resistant Iron Based Alloy
Masaylo, D. V. / Orlov, A. / Razumov, N. G. / Popovich, A. A. / Popovich, V. | 2019
526
Designing of Topology Optimized Parts for Additive Manufacturing
Polozov, A. Orlov, D. V. Masaylo, I. A. / Ji, P. G. | 2019
534
Investigation of Aluminum Composite Produced by Laser-Assisted Cold Spray Additive Manufacturing
Orlov, D. V. Masaylo, A. / Igoshin, S. | 2019
542
X-Ray CT Investigation of Graded Ti-Ti64 Material Produced by Selective Laser Melting
Sufiiarov, V. / Kantyukov, A. / Polozov, I. A. | 2019
549
Effect of Selective Laser Melting Process Parameters and Heat Treatment on Microstructure and Properties of Titanium Alloys Produced from Elemental Powders
Polozov, I. A. / Borisov, E. / Popovich, V. | 2019
556
The Effect of Laser Power on the Microstructure of the Nb-Si Based In Situ Composite, Fabricated by Laser Metal Deposition
Goncharov, I. S. / Masaylo, D. V. / Orlov, A. / Razumov, N. G. / Obrosov, A. | 2019
563
Investigation of Functional Graded Steel Parts Produced by Selective Laser Melting
Sufiiarov, V. / Borisov, E. / Polozov, I. A. | 2019
569
Evolution of the Lattice Structures Properties Manufactured by Selective Laser Melting and Subsequent Hot Isostatic Pressing
Borisov, E. / Sokolova, V. V. / Orlov, A. / Ji, P. G. | 2019
575
Selective Laser Melting of Nanocomposite Ti-6Al-4V and TiC Powder
Borisov, E. / Masaylo, D. V. / Popovich, V. | 2019
580
Control of Deviations in Lattice Structures Manufactured by Selective Laser Melting
Sokolova, V. V. / Kantyukov, A. | 2019
587
Registration of an ICP Plasma CV Dependences under Various Pressures in the Plasma-Chemical Deep Etching System
lankevich, G. A. | 2019
594
Calculating the Nominal Values of the Matching Device Installation of Plasma Chemical Etching
Endiiarova, E. V. / Ruby, S. | 2019
601
Microstructure and Mechanical Properties of Powder Steel 16Cr - 2Ni - Mn - Mo Obtained by Mechanical Alloying and Spark Plasma Sintering
Makhmutov, T. Y. / Razumov, N. G. / Shamshurin, A. I. | 2019
610
Design of Special Device for the Forced Electrolytic-Plasma Polishing of Internal Surfaces by Counter Flows
Ushomirskaya, L. A. / Baron, Y. M. / Kuzmichev, I. S. | 2019
617
Effect of the Mechanical Alloying and Spark Plasma Sintering on Microstructure, Phase Composition and Chemical Elements Distribution of Nb-Si Based Composite
Goncharov, I. S. / Razumov, N. G. / Shamshurin, A. I. / Wang, O. S. | 2019
628
Plasma Chemical Synthesis of Aluminum Nitride Nanopowder
Novikov, P. A. / Kim, A. E. / Ozerskoi, N. E. / Wang, Q. S. / Popovich, A. A. | 2019
634
Technological Principles of Internal Surfaces Finishing by Forced Electrolytic-Plasma Polishing
Radkevich, M. M. / Kuzmichev, I. S. | 2019
640
Aspect-Independent Siliconglass Etching by Bosch Method
Alekseev, R. A. / Alieva, A. I. / Kucal, E. | 2019
649
Tribotechnical Diagnostics of an Internal Combustion Engine According to the Condition of the Oil
Syundyukov, I. S. / Ivanov, E. K. / Skotnikova, M. A. / Qian, J. D. / Medvedeva, V. V. / Krylov, N. A. | 2019
656
Investigation of Tribological Characteristics of Polymers Used in Medicine
Andriushchenko, E. / Semenova, V. / Yuan, P. | 2019
662
Vibroacoustic Study of Abrasive Wear of Multilayered Sliding Bearings
Tikalov, A. V. / Yefremov, L. V. | 2019
669
Comparative Tribological Testing of Diamond-Containing Inserts of Bearings of Main Shaft of Rotary Steerable Systems
Shemyakinskiy, B. A. / Skotnikova, M. A. / Wang, Z. X. / Alkhimenko, A. A. / Lozhechko, V. P. | 2019
677
Formation of Nanostructure and Tool Wear during Cutting Treatment of Titanium Alloy
Ivanova, G. V. / Padgurskas, J. / Jankauskas, V. / Popov, A. / Shasherina, S. | 2019
684
Study of Micro-Hardness of Steel Surfaces after their Friction in the Medium of Plastic Lubricating Material Used in the Units and Mechanisms of Equipment of Oil and Gas and Shipbuilding Industry
Steshenkov, A. L. / Chulkin, S. G. / Alkhimenko, A. A. / Shaitor, S. D. / Bogatyrev, K. D. / Tarasova, V. A. | 2019
690
Method of Testing Rolled Tubular Products for Oilfield Pipes for Corrosion-Abrasive Wear
Shemyakinskiy, B. A. / Alkhimenko, A. A. / Tikhonov, S. M. / Mitrofanov, A. V. / Sidorova, E. P. | 2019
695
Evaluation of the Strength of Flat Gears According to the Criterion of the Onset of Plastic Deformation
Komarov, A. S. / Zhukov, V. A. | 2019
701
Semiempirical Mathematical Models of Spinning Friction Steel ShKh15 Steel Titles on Steel R6M5, on a Scheme of a Globe Plane Taking into Account Wear
Steshenkov, A. L. / Chulkin, S. G. / Alkhimenko, A. A. / Galskii, K. Y. / Bogatyrev, K. D. / Tarasova, V. A. | 2019
709
Studies of Tribological and Corrosion Properties of Coatings Based on Iron for Light Alloy Drill Pipes of Aluminium Alloys
Shemyakinskiy, B. A. / Skotnikova, M. A. / Wang, Z. X. / Alkhimenko, A. A. | 2019
716
Strain and Friction Effect on the Stress-Strain State in the Deformation Zone during Cold Rolling of Thin Beryllium and Aluminum Foils
Mishin, V. V. / Shishov, I. A. / Paromov, V. V. | 2019
725
Quasi-Optimal Correlation Algorithm for Measuring the Parameters of Surface Microrelief
Abramov, A. / Bobrovskij, N. M. / Nosov, N. / Tabakov, V. / Galyalieva, K. | 2019
731
Method for Determining Texture Parameters of Processed Precision Surfaces by Correlation
Abramov, A. / Bobrovskij, S. M. / Nosov, N. / Tabakov, V. / Lopatina, F. | 2019
737
Finite Element Simulation of Temperature Field during Friction Surfacing of Al-5Mg Consumable Rod
Isupov, F. Y. / Panchenko, O. / Zhabrev, L. / Mushnikov, I. / Rylkov, E. / Popovich, A. A. | 2019
745
Improvement of Technology of Formation of Coatings with Metal Effect by Modified Water-Dispersion Paints
Sokolova, V. A. / Markov, V. A. / Rzhavtsev, A. A. | 2019
752
Corrosion-Resistant Ceramic Coatings that are Promising for Use in Liquid Metal Environments
Markov, M. A. / Krasikov, A. D. Kashtanov. A. V. / Bykova, A. D. / Gerashchenkov, D. A. / Makarov, A. M. / Perevislov, S. N. | 2019
760
Study of the Method of Obtaining Functional Interest-Metallic Coatings Based on Ni-Ti Reinforced with WC Nanoparticles
Makarov, A. M. / Gerashchenkov, D. A. / Aleksandrov, S. E. / Markov, M. A. / Gerashchenkova, E. Y. / Belyakov, A. N. / Bykova, A. D. | 2019
768
Technological Aspects of Obtaining Functional Gradient Coatings to Protect Machinery from Wear
Gerashchenkov, D. A. / Makarov, A. M. / Bystrov, R. Y. / Bobkova, T. O. / Belyakov, A. N. / Bykova, A. D. / Markov, M. A. / Farmakovsky, B. V. | 2019
774
Technological Aspects of Obtaining Functional Coatings Based on Silver by the Method of Cold Gas-Dynamic Spraying
Bykova, A. D. / Farmakovsky, B. V. / Markov, M. A. / Belyakov, A. N. / Makarov, A. M. / Gerashchenkov, D. A. / Perevislov, S. N. | 2019
781
Electrochromic Properties of NiO Thin Coatings
Kondrateva, A. S. / Bespalova, P. / Baryshev, G. K. / Mishin, M. | 2019
787
The Use of the TMA as Stabilizing Reagent for the Li-O System Obtained by Atomic Layer Deposition
Nazarov, D. / Ezhov, I. / Mitrofanov, I. / Lyutakov, O. / Maximov, M. Y. | 2019
795
Features of the Implementation of the Vegard's Law in Thin Films of Rare Earth Elements Compounds
Khavrov, G. D. / Kaminski, V. V. / Sharenkova, N. V. / Vinogradov, A. A. | 2019
801
Effects of PTA Deposition Parameters on Coating Quality of 41Cr4, 50CrV4 and 100Cr6 Steel
Golovin, P. A. / Mildebrath, M. / Zemlyakov, E. | 2019
811
Influence of Se on Properties of As-S-Se-I Glass for Immersion Mid-IR Leds Lenses
Dronova, M. G. / Osipov, A. | 2019
818
Ionic Seebeck Effect in Alkali Niobophosphate Glasses
Markov, V. A. / Sokolov, I. / Bozhko, M. / Kovalenko, E. | 2019
824
Structural Features and the Effect of Two Alkalis in Chalcogenide and Phosphate Glasses
Sokolov, V. A. Markov, I. / Povolotskiy, A. | 2019
834
Fusible Glass Based on Glassy Chalcogenide Type Systems Ge-S(Se)Br, Ge-S(Se)I
Blinov, N. L Krylov, M. D. Mikhailov, L. N. / Bochagina, E. V. | 2019
841
Bi-Activated Glasses and their Potential Covering Spectral Region as Active Media for Tunable near Infrared Lasers
Fedorov, Y. / Aseev, V. / Tuzova, I. / Klinkov, V. | 2019
848
Effective Diagnostics of Internal Defects of Diamonds in the near Infrared Range on the Basis of Immersion Medium Made from Low-Melting Chalcogenide Glass
Semencha, A. / Dronova, M. G. / Klinkov, V. / Osipov, A. / Mistry, J. | 2019
856
Formation of New Glass-Veramic Materials with Controllable Dielectric and Magnetic Properties
Tyurnina, Z. G. / Tyurnina, N. / Sviridov, S. I. / Sinelshchikova, O. Y. / Tumarkin, A. V. / Drozdovskii, A. V. / Vlasenko, N. S. | 2019
864
Electronic Structure and Ionic Transport in Phosphate Glass with Pyrophosphate Structural Elements
Petrov, A. / Sokolov, I. / Markov, V. A. | 2019
871
Manifestation of Concentration Quenching of Fluoroaluminate Glasses Doped with Erbium
Klinkov, V. / Semencha, A. / Tsimerman, E. / Osipov, A. / Dronova, M. G. | 2019
878
Study of Crystallization Kinetics of Amorphous Zirconia in Fe2O3 Matrix by Kissinger Method
Bobrynina, E. / Starykh, R. / Ginzburg, S. / Morozova, I. | 2019
885
Investigation of the Pastes for Multilayer Ceramic Capacitors Termination
Gordeev, A. V. Dmitrieva, P. S. / Gallai, LY. | 2019

Wie erhalte ich diesen Titel?

Feedback