Impact of sized abrader and normal load on deformation morphology of EN 24 steel subjected to abrasion (Englisch)

in AIP Conference Proceedings ; 2204 , 1 ; 14
AIP Conference Proceedings

There is a relative motion between two components such as in machine elements happening with transfer of force displacement or motions. The features like transferring of load, displacement from one object to other object takes place between the parts. All these cases give rise to discontinuities in velocity and displacements. This type of loading, displacements and dynamic conditions give rise to elastic, inelastic and surface damage of both the objects. These discontinuities results in volume loss of materials. Loss of materials gives rise to loss of durability and reliability of machines. In the present study experiments were conducted using rubber wheel abrader for identifying the influence of abrader grain size and effect of normal load. On three body abrasive wear individual experiments were conducted using sand abrader of grain size 106 microns, 212 microns and 425 microns. EN 24 steel was used as target material. The speed was maintained at 200 rpm. The time of the test was 8 minutes. The abrader flow rate was 100 grams/minute. The weight loss was estimated and observed that 0.002, 0.022 and 0.037 for a normal load 11.37 N, 35.31 N, 58.85 N and abrader size of 106 microns. The weight loss was estimated and observed that 0.001, 0.020 and 0.037 for a normal load 11.37 N, 35.31 N, 58.85 N and abrader size of 212 microns. The weight loss was estimated and observed that 0.02, 0.021 and 0.031 for a normal load 11.37 N, 35.31 N, 58.85 N and abrader size of 425 microns. The wear track of target material and abrader after experiments was studied in scanning electron microscope (SEM) and found that for a given normal load, the abrader size was found not to much influence on wear loss and wear mode was influenced to a longer extent by normal load rather than abrader grain sizes. The hardness of the target material was found to be influential in wear modes.

Wie erhalte ich diesen Titel?
Download
Kommerziell Vergütung an den Verlag: 24,35 € Grundgebühr: 4,00 € Gesamtpreis: 28,35 €
Akademisch Vergütung an den Verlag: 16,23 € Grundgebühr: 2,00 € Gesamtpreis: 18,23 €

Dokumentinformationen


Inhaltsverzeichnis – Band 2204, Ausgabe 1

Zeige alle Jahrgänge und Ausgaben

Die Inhaltsverzeichnisse werden automatisch erzeugt und basieren auf den im Index des TIB-Portals verfügbaren Nachweisen der enthaltenen Aufsätze. Die Anzeige der Jahrgänge kann aufgrund fehlender Aufsatznachweise unvollständig oder lückenhaft sein, obwohl die Zeitschrift komplett in der TIB verfügbar ist.

Analytical study on the seismic behavior of two adjacent buildings connected by viscous dampers
Khan, Shadab / Kumar, C. L. Mahesh / Shwetha, K. G. | 2020
A study on index properties of kaolinite and bentonite sand mixtures
Jyothi, D. N. / Prasanna, H. S. / Vishwanath, Chethan | 2020
Analysis of water quality parameters of groundwater near Ranebennur Industrial Area, Haveri district, Karnataka, India
Vijaya Kumar, H. / Patil, Nagraj. S. / Prabhu, Nanjundi | 2020
An experimental investigation of grit size effect over a smooth circular cylinder
Bharatbhai, Babaria Harit / Ramakrishna, J. / Tahasildar, Firoz H. / Somashekar, V. | 2020
The effect of planetary milling conditions on tungsten-carbide (WC) particle size reduction and sintered properties
Aithal, Kiran / Manjunath, H. N. / Babu, N. Ramesh / Kumar, Praveen / Atreya | 2020
Computational studies on laminar flow in micro-channel heat sinks for electronic cooling applications
Manjunath, H. N. / Naveen, K. S. / Babu, N. Ramesh / Aithal, Kiran / Veda, S. N. | 2020
Finite element formulation of conjugate double diffusion in porous annulus
Baig, Maughal Ahmed Ali / Azeem / Ahmed, N. J. Salman / Kamangar, Sarfaraz / Khan, T. M. Yunus / Badruddin, Irfan Anjum / Reddy, Avala Raji / Khaleed, H. M. T. | 2020
Optimisation of machining parameters for end milling of maraging steel MDN 250 using TiAlSiN and TiSiN coated WC-Co inserts
Varghese, Vinay / Jagmalpuria, Abhishek / Badiger, Pradeep V. / R., Ramesh M. | 2020
Issues on planning of solid waste management scheme through evaluation in integrated data information system
Rao, Kumar R. / Sreekeshava, K. S. / Dharek, Manish S. / Sunagar, Prashanth | 2020
Physico chemical analysis of intrusions in Bellandur lake
Monesh, M. / Karthik, N. / Kumar, Dilip / Bharath, V. / Korishetti, Naveen / Vidyavathi, N. | 2020
Experimental investigation on axially loaded alkali activated slag concrete (AASC) and traditionally vibrated concrete (TVC) square
Srinivasulu, Surapuraju / Wali, Laxmiputra S. / R., Mourgouane | 2020
Influence of erodent size, impingement angle and fillers on solid particle erosion wear behaviour of carbon fiber reinforced epoxy composite
Prashanth, N. | 2020
Finite element analysis of bonded patch repair of a panel with multiple cracks
Srilakshmi, R. / Rao, M. Vedanth / Kumar, R. Sanjay | 2020
Implementation of Taguchi method and ANNOVA for optimization of process parameter in improving the surface roughness of the products in injection moulding operation
Kumar, Satyam / Ray, Gaurav Kumar / Maharjan, Deep / Adoni, Dadapeer / Shetty, P. Balachandra / Yadav, Shiv Pratap Singh | 2020
Experimental study on Bamboo as a reinforcing material in concrete
Sutharsan, R. / Ramprasanna, S. R. / Gnanappa, S. Basil / Ganesh, A. Chithambar | 2020
Evolutionary optimisation for optimising process parameters in vacuum carburising
Mallick, Priyabrata / R. H., Shashanka / C. G., Shivaprasad | 2020
Static aero-elastic analysis of wind tunnel test model in transonic flow
Siddalingappa, P. K. / Dharmendra, A. P. / Hosur, Santosh / Manvi, Prashant | 2020
Simulation of backward facing step flow using OpenFOAM®
Satheesh Kumar, Aravind / Singh, Anugya / Thiagarajan, Kannan Budda | 2020
Precipitation overflow demonstration and rainfall-runoff modeling by regression analysis: A case study
Surendra, H. J. / Junaid, Mohammed Qaisar / Prajeesh, P. / Lalith Kumar, S. / Hussain Malik, Junaid | 2020
CFD simulation of turbulent flow around multi-element airfoil
Gupta, Sonali / Naveen, R. / Prathik, B. V. / Spurthy, S. | 2020
Study on effect of semi-circular dimple on aerodynamic characteristics of NACA 2412 airfoil
Sowmyashree, Y. / Aishwarya, D. I. P. / Spurthy, S. / Sah, Roshan / Pratik, B. V. / Srikanth, H. V. / Suthan, R. | 2020
The study of microstructure and wear behaviour of titanium nitride reinforced aluminium composites
Mahesh, L. / Reddy, J. Sudheer / Jagadeesh, L. R. / Vinyas, M. | 2020
Influence of Ti coated tools on process parameters in turning process of MDN431
Badiger, Pradeep V. / Desai, Vijay / Ramesh, M. R. / Vinyas, M. / Santhosh, C. M. / Prajwala, B. K. / Raveendra, L. | 2020
Slurry erosive study and optimization of material and process parameters of single and hybrid matrix flexible composites using Taguchi approach
Mahesh, Vishwas / Joladarashi, Sharnappa / Kulkarni, Satyabodh M. | 2020
Experimental studies to demonstrate the influence of fibres on shear strength of GPC adopting push-off specimens
Kumar, N. R. Harish / Kumar, K. Anil / Ganesh, Bharathi / Prabhakara, R. | 2020
Stagewise performance evaluation of common effluent treatment plant at Koparkairane, Navi Mumbai
Selvam, Shanthi P. / Topkar, V. M. | 2020
Comparison between artificial neural network and SPSS to predict vehicle emission
Ramprasanna, S. R. / Ganesh, A. Chithambar / Basil Gnanappa, S. / Sutharsan, R. | 2020
Assessment of groundwater quality by integration of water quality index and GIS techniques
Nandeesha / Khandagale, Vishal. R. / Mahesh, Vedamurthy. B. / Suman, Ankit Kumar / Velagapudi, Mohan Teja | 2020
Feasibility study on strength and flexural behaviour of RC beams with foundry fine aggregate
A., Shashi Kumar / Narayana, G. / Narendra, B. K. / Murthy, Narasimha | 2020
Aerodynamic design and optimization of supersonic inlets for external compression
Shashi, V. Kumar / Archana, Sridhar / Chaithanya, Kumar K. L. / Poojita, Srinivasan / Mukesh, M. | 2020
Enhanced process parameters using TOPSIS method during wire electro discharge machining of TiNiCo shape memory alloy
Soni, Hargovind / Narendranath, S. / Ramesh, M. R. / Mashinini, P. M. | 2020
Prediction of specific energy using dominant frequency of acoustics produced during diamond core drilling operations
Vijaya Kumar, Ch. / Murthy, Ch. S. N. / Vardhan, Harsha | 2020
Effect of PP and PP/MWCNT-COOH nanocomposites on mechanical properties
Poornima, C. / Sheshadri, C. E. Pavan / Mallik, U. S. | 2020
Influence of machining cutting speed on cutting force, tool flank wear on PVD inserts by turning of Ti-6Al-4V alloy
Raghavendra, M. J. / Ramachandra, C. G. / Srinivas, T. R. / Pai, M. Prashanth | 2020
Effect of friction stir processing on the dry sliding wear behavior of AZ31 Mg alloy
Diksangi, Siddramesh S. / Kulkarni, Sourabh / Edachery, Vimal / Pariyar, Abhishek / Kumar, Santosh | 2020
Hygrothermal response analysis of MEE beam embedded in adaptive wood through FE methods
Mahesh, Vinyas / Ravichandra, Hemanth Nagavara / Kattimani, Subhaschandra / Nagaraja, Chethan Vemagal | 2020
Design and analysis of composite panel with curved stiffeners for aircraft fuselage application
Aditya, A. R. / Babu, N. C. Mahendra | 2020
MWD technique to estimate the uniaxial compressive strength of rocks
Lakshminarayana, C. R. / Tripathi, Anup Kumar / Pal, Samir Kumar | 2020
A Bayesian approach to predict the structural responses of FGM plates with uncertain parameters
Loja, M. A. R. / Carvalho, A. / Neto, J. P. / Silva, T. A. N. / Vinyas, M. | 2020
Study on effect of surface modification on aerodynamic characteristics of Eppler 387 airfoil
Spurthy, S. / Sumukha, G. D. / Prathik, B. V. / Naveen, R. / Srikanth, H. V. / Sridhar, K. | 2020
Optimization of the surface quality in milling machine using PVC composite plate
Ahirwar, Yashwant / Soni, Hargovind / Mashinini, P. M. / Dewangan, Shailesh | 2020
Development & characterization of composite coatings on A-36 steel using HVOF technique
Adarsha, H. / Pattanaik, A. / Chaturvedi, A. / Bhat, S. | 2020
Dynamic performance of laminated composite plates with a circular hole
Kallannavar, Vinayak / Umatar, Sagar / Kattimani, S. | 2020
The effect of reinforcements on mechanical properties of A7005 hybrid MMCs
Kumar, S. Praveen / Shantharaja, M. / Vinyas, M. | 2020
An experimental study on finding rheological properties of fresh conventional vibrated concrete mixes using concrete shear box
Ajay, N. / Girish, S. | 2020
Feasibility study for optimal cropping pattern for available water in the distributary of an irrigation system
Kumar, S. B. Ganesh / Ramesh, B. R. / Surendra, H. J. | 2020
Effect of thickness and modulus of masonry on the width of equivalent diagonal strut of masonry infill
A., Lakshmikantha B. / L., Shobha / Ganesh, Bharathi / R., Prabhakara | 2020
Feasibility study on augment drinking water supply and improve ground water table by 3rd stage lift irrigation scheme for Honakere, Karnataka
Mahalingegowda, H. R. / Narendra, B. K. | 2020
Studies on blasting effects of shock waves from a small – Scale shock tube
Singh, Anugya / Aravind, S. / Kannan, B. T. | 2020
Investigation of iron ores based on the bond grindability test
Harish., H. / Vardhan, Harsha / Raj, M. Govinda / Kaza, Marutiram / Sah, Rameshwar / Sinha, Abhishek / Kumar, S. Bharath | 2020
Finite element formulation of conjugate heat transfer in porous annulus
Ahamad, N. Ameer / Baig, Maughal Ahmed Ali / Ahmed, N. J. Salman / Kamangar, Sarfaraz / Khan, T. M. Yunus / Badruddin, Irfan Anjum / Reddy, Avala Raji / Khaleed, H. M. T. | 2020
Effect of cast thickness on properties of Al-Si cast obtained different by using vertical centrifugal
Sen, Smrutirekha / Reddy, Sudheer / Muralidhara, B. K. / Mukunda, P. G. | 2020
Analysis of stabilisation period of two lentic lake with marble powder
Shreyas, B. V. / Deepthi, B. P. / Vishwanath, K. N. | 2020
The wear properties of ceramic B4C/Al matrix composite at elevated temperature under dry sliding
Lakshmikantha, Rajesh Gandasi / Nanjundaswamy, Soundarya / Jayaprakash, Thilak Kumar / Ravindra, Rohan Kundwada / Auradi, Virupaxi | 2020
Preface: Proceedings of the 2nd International Conference on Emerging Research in Civil, Aeronautical and Mechanical Engineering (ERCAM)-2019
| 2020
Analysis of silo and comparing silo with different end condition
Krishna, R. R. Gagan / Prathap, H. K. Shiva / Narendra, B. K. / Mahadevaiah, T. | 2020
Earthquake analysis of multi storied reinforced concrete moment resistance building with vertical irregularity considering soil structure interaction for raft foundation
Parmar, Hemish. V. / Patel, Nilay. K. / Rana, Himesh. R. / Chandiwala, Anuj | 2020
Estimation of design flood at a reservior (outlet) by CWC based hydrometeriological approach
Kavya, B. M. / Kishan, S. / Arun, M. / Surendra, H. J. / Narandra, B. K. | 2020
Analysis of flexible pavement with steel slag as coarse aggregate
Muralidhara, R. / Danavandi, Varsha. S. / Das, Vivek. R. | 2020
Evaluation of strength properties of high volume fly ash concrete incorporating nanomaterials
Shashikumar, C. S. / Keshavamurthy, M. / Santhosh, B. S. | 2020
Identification of nozzle parameters in 3S device using artificial intelligence and meta-heuristic optimization scheme
Venkata Ramana, P. Gangadhar / Prabhu, L. | 2020
Metaheuristic optimal design of adaptive composite beams
Costa, D. M. S. / Loja, M. A. R. / Vinyas, M. | 2020
Design, fabrication and analysis of pen mold for injection molding machine
Kumar, Rishab / Singh, Robin / Singh, Ripu / Yadav, Sachidanand / Shetty, P. Balachndra / Yadav, Shiv Pratap Singh | 2020
Rural development studies under Unnath Bharath Abhiyan a case study of Chikkapalnahalli and Tannenahalli village
Veerappadevaru, G. / Sharma, H. D. / Manu, H. M. / Mallikarjuna, S. D. / Rashmi, B. V. / Kavya, D. | 2020
Evaluation of level of service at few signalized intersections using Indian Highway Capacity Manual (Indo-HCM, 2018)
Savitha, B. G. / Satyamurthy, R. / Jagadeesh, H. S. / Sathish, H. S. / Sundararajan, T. | 2020
The screening efficiency of linear vibrating screen - An experimental investigation
Kumar, S. Bharath / Vardhan, Harsha / Raj, M. Govinda / Kaza, Marutiram / Sah, Rameshwar / Harish, H. | 2020
SEM characterization of 3D printed ABS tensile specimens developed by fused deposition modelling
Prasad, Kaushik V. / Adarsha, H. / Pattnaik, Ashutosh / Shashank, B. / Kiran, P. Sri Sai / Mallikarjuna, Mitai / Sandeep, B. | 2020
Power generation using parabolic dish CSP technology
Pathak, Rabi / C., Pramod K. / Madhusudhan / L., Harish Kumar / Giri, Nabin / Uprety, Sujan | 2020
Impact of sized abrader and normal load on deformation morphology of EN 24 steel subjected to abrasion
Hemaraju | 2020
A case study on project performance of railway underpass construction project in Jaipur, India
Ojha, Avinash / Chouhan, Vineet / Gupta, Lokesh / Goswami, Shubham | 2020

Ähnliche Titel

  • SKIN ABRADER

    Freier Zugriff
    SEPULVEDA GENARO SEBASTIAN / BAHNEY TIMOTHY JON / PARK SHENA HAE | Europäisches Patentamt | 2014
  • Abrasion testing on modified DuPont-Grassell Abrader

    Rigbi, Z. | Engineering Index Backfile | 1961
  • Handheld abrader

    Freier Zugriff
    HSU CHIH HUA / LIN JUI HENG / CHENG CHEN CHEN | Europäisches Patentamt | 2016
  • Handheld Abrader

    Freier Zugriff
    HSU CHIH HUA / LIN JUI HENG / CHENG CHEN CHEN | Europäisches Patentamt | 2016
  • Skin abrader

    Freier Zugriff
    SEPULVEDA GENARO SEBASTIAN / BAHNEY TIMOTHY JON / PARK SHENA HAE | Europäisches Patentamt | 2014