Melden Sie sich zuerst an, um alle Funktionen optimal nutzen zu können!

Cellular structures based on metallic hollow spheres - mechanical and acoustical properties (Englisch)

In: PM, Powder Metallurgy World Congress & Exhibition, 2004, PM 2004, 2004   ;  143-148  ;  2004

Wie erhalte ich diesen Titel?

Exportieren, teilen und zitieren

Metallic cellular structures based on metallic hollow spheres (MRS) are a new highly porous material. Single metal hollow spheres can be made with very good dimensional control due to the high performance of the manufacturing process. Hollow spheres structures can be realized by resin bonding, soldering and sintering of single spheres. This reveals a wide spectrum of different properties and possible applications. In this contribution we would like to focus on mechanical and acoustic properties. Mechanical tests have been carried out on single MHS and MHS-structures. Sintered MHS-structures were tested in exhaust systems and the results will be presented and discussed. Further applications are introduced and discussed. Metallic hollow sphere (MHS) structures are a new variant of cellular metals. The difference to other methods is the controlled manufacturing of single cells the single MHS. Afterwards tailored made cellular structures can be built up using these single cells. This is the only technology which can guarantee reproducible properties of the structure. An electrodeposition of various materials such as Ni, Cu and ZnNi on spherical substrates has been carried out. A drawback with this method is that there are only a small number of metals that can be deposited on carrier surfaces by electrical means, which limits the use of this technology. Metal hollow sphere structures have been manufactured in a wide range of materials and densities. According to the requirements MHS parts can be manufactured by sintering, brazing or by adhesive bonding. The specific energy absorption characteristics can be mainly influenced by the structural density and by alloying options, lead the MHS as a candidate for energy absorption applications into the near future. Sound absorption tests of MHS are showing their excellent suitability for the application in automotive mufflers. Supplemented real tests on cars are running and reveal their performance compared to glass wool containing mufflers as sound absorbing material.

Inhaltsverzeichnis Konferenzband

Die Inhaltsverzeichnisse werden automatisch erzeugt und basieren auf den im Index des TIB-Portals verfügbaren Einzelnachweisen der enthaltenen Beiträge. Die Anzeige der Inhaltsverzeichnisse kann daher unvollständig oder lückenhaft sein.

1
Metal Droplet's Deformation and Break-up by a Gas Stream
Sheikhaliev, S. M. / Beryukhov, A. V. / Dunkley, J. J. / European Powder Metallurgy Association et al. | 2004
1
The Strain Rate Effect on Material Parameters of Porous Bodies during Axial Compression
Ryabicheva, L. / Kravtsova, Y. / European Powder Metallurgy Association et al. | 2004
1
Powder Metallurgy Education in the Framework of Materials Science and Engineering
Upadhyaya, G. S. / Fellow, E. / European Powder Metallurgy Association et al. | 2004
1
Rationalizing Different Values of Fracture Stresses obtained in Tensile and Bend Tests
Andrew, S. / Wronski / Cias, A. / European Powder Metallurgy Association et al. | 2004
1
Forming of PM Preforms from Al-Cu-Si Alloy in Semi - Solid State
Szczepanik, S. / European Powder Metallurgy Association et al. | 2004
5
Mechanical Properties of Chromium PM Steel Sintered in Technical Nitrogen
Cias, A. / Mitchell, S. C. / Wronski, A. S. / European Powder Metallurgy Association et al. | 2004
7
Fine Tool Steel Powders using novel Free Fall Gas Atomization Technology
Tornberg, C. / Folzer, A. / European Powder Metallurgy Association et al. | 2004
7
Plastic Deformation Behaviour of Porous Sintered Steels
El-Soeudy, R. I. / Petrossian, G. L. / Beiss, P. / European Powder Metallurgy Association et al. | 2004
7
Effect of Sn additions on Microstructure Evolution in Sintered Aluminium Alloys
Rout, S. K. / Veltl, G. / Petzoldt, F. / European Powder Metallurgy Association et al. | 2004
7
New Tool Steels Produced via Spray Forming
Hillskog, T. / Sandberg, O. / European Powder Metallurgy Association et al. | 2004
11
Atmosphere Effects in the Sintering of Aluminium
Schaffer, G. B. / Sercombe, T. B. / Huo, S. H. / Hall, B. J. / Spranklin, J. A. / European Powder Metallurgy Association et al. | 2004
13
Hot Gas Atomisation - Economic and Engineering Aspects
Dunkley, J. J. / European Powder Metallurgy Association et al. | 2004
13
Improvement in the Sinterability of 7-xxx-based Aluminium Premix
Gradl, J. / Neubing, H.-C. / Muller, A. / European Powder Metallurgy Association et al. | 2004
13
Development of 2014-Al Alloy Based SiC~p Particulate Reinforced Composites by Spray Co-deposition Process
Srivastava, V. C. / Schneider, A. / Uhlenwinkel, V. / Bauckhage, K. / European Powder Metallurgy Association et al. | 2004
13
Development of 2014-Al alloy based SiCp participate reinforced composites by spray Co-deposition process
Srivastava, V.C. / Schneider, A. / Uhlenwinkel, V. / Bauckhage, K. et al. | 2004
17
Effect of High Density Levels on Degassing of High Strength PM Steel Compacts
Danninger, H. / Xu, C. / Blanco, L. / Campos, M. / Torralba, J. M. / European Powder Metallurgy Association et al. | 2004
17
Effect of Minimum Carbon on Coarse Grains in Sintered Iron
Kuroki, H. / Tokunaga, Y. / Suzuki, H. Y. / European Powder Metallurgy Association et al. | 2004
19
Inert gas atomization of neodymium-lron-boron permanent magnetic materials
Saleh, M.H. / Othman, E.A. / Ismail, F. / Hussain, P. / Mohammed, M. et al. | 2004
19
Porous Blanks by Hot Die Stamping
Ryabicheva, L. / Tsyrkin, A. / European Powder Metallurgy Association et al. | 2004
19
Inert Gas Atomization of Neodymium-Iron-Boron Permanent Magnetic Materials
Saleh, M. H. / Othman, E. A. / Ismail, F. / Hussain, P. / Mohammad, M. / European Powder Metallurgy Association et al. | 2004
21
Evaluation of Wear Resistance in PM Alloys by Means of Microscratch Testing
Caro, J. / Casellas, D. / Prado, J. M. / European Powder Metallurgy Association et al. | 2004
23
Surface Interactions during Sintering of Water-atomised Pre-alloyed Steel Powder
Karlsson, H. / Nyborg, L. / Bergman, O. / European Powder Metallurgy Association et al. | 2004
23
Investigations of Sorption Properties of Boron Containing Composite Materials
Chikhradze, N. M. / Marquis, F. D. S. / Abashidze, G. S. / Dalakishvili, N. Z. / Peikrishvili, A. B. / Chikhradze, M. N. / European Powder Metallurgy Association et al. | 2004
25
Development of New Procedures and Devices for Ultrasonic Gas Atomization of Metallic Melts using Specific Methods of Engineering Creativity
Sparchez, Z. / European Powder Metallurgy Association et al. | 2004
25
Evolution of the Top Surface Temperature of Spray Formed Billet
Ye, H. / Fritsching, U. / Bauckhage, K. / European Powder Metallurgy Association et al. | 2004
27
The Characteristics of Products using Rapidly Solidified Aluminum Alloy Powders, produced by the Sinter Forging Method
Ichikawa, J. / Shikata, H. / European Powder Metallurgy Association et al. | 2004
29
Effective elastic properties of macrograded PM materials
Kupkova, M. / Kupka, M. / Strobl, S. / Dudrova, E. / European Powder Metallurgy Association et al. | 2004
31
Kinetics of Phase Formation in Nickel Aluminide Composites Processing by Reactive Synthesis
Radu / Orban, L. / Lucaci, M. / European Powder Metallurgy Association et al. | 2004
33
Synthesis and Characterization of Rapidly Solidified Al-Ni-Co-RE Alloy
Bizjak, M. / Kosec, L. / European Powder Metallurgy Association et al. | 2004
33
Spray Forming of Superalloy Rings
Uhlenwinkel, V. / Attwater, R. / Achelis, L. / Walter, M. / European Powder Metallurgy Association et al. | 2004
33
Processing simplification of mechanically alloyed Aluminium by powder annealing
Cintas, J. / Cuevas, F. G. / Montes, J. M. / Herrera, E. J. / European Powder Metallurgy Association et al. | 2004
35
The effect of the load bearing area on the Young's modulus in high density PM alloy steels
Xu, C. / Weiss, B. / Khatibi, G. / Danninger, H. / European Powder Metallurgy Association et al. | 2004
37
Challenges in Processing of P/M Chromium Manganese Low-Alloy Steels
Causton, R. J. / Lindsley, B. A. / European Powder Metallurgy Association et al. | 2004
39
Studying of Decarbonizing of Atomized Iron Powder from High Carbon Content Cast Iron Melt
Fedorov, D. / Miroshnichenko, N. / European Powder Metallurgy Association et al. | 2004
39
Control of the Temperature Distribution in a Billet during Spray Forming for Minimising Distortion Potential
Fritsching, U. / Cui, C. / Huang, Z. / Schulz, A. / European Powder Metallurgy Association et al. | 2004
39
Effect of Mg Addition on Sintering Characteristic of 7xxx Series Al PM Alloy
Do Kim, Y. / Min, K. H. / Kang, S. P. / Chang, S.-Y. / European Powder Metallurgy Association et al. | 2004
41
Fracture Toughness of PM Alloy Steels
Ganesan, P. / Domsa / Beiss, P. / European Powder Metallurgy Association et al. | 2004
43
Dilatometer investigation of Reactive Liquid Phase Sintering of Al-Cr System
Romanov, G. N. / Tarasov, P. P. / D yachkovskiy, P. K. / Savitskii, A. P. / European Powder Metallurgy Association et al. | 2004
45
Dimensional Changes and Secondary Porosity in Liquid Phase Sintered Al Alloys
Martin, J. M. / Navarcorena, B. / Arribas, I. / Gomez-Acebo, T. / Castro, F. / European Powder Metallurgy Association et al. | 2004
45
Experiments Concerning the Atomization of Melts Using Hot Gases
Wolf, G. / Faulstich, M. / Warkentin, O. / Lupton, D. F. / Mayer, S. / European Powder Metallurgy Association et al. | 2004
45
Industrial Applications for Tool Steel Alloys Processed by Spray Forming
Kjeldsteen, P. / European Powder Metallurgy Association et al. | 2004
47
Influence of microstructure and porosity on tensile and impact properties of High Performance PM steels
Stoyanova, V. / Xu, C. / Blanco, L. / Molinari, A. / Danninger, H. / Torralba, J. M. / Yu, Y. / Lindqvist, B. / European Powder Metallurgy Association et al. | 2004
49
Nitrogen On-Site Generation for Sintering Furnace Atmospheres
Plicht, G. / Edwards, R. / Mills, R. / Frey, J. / European Powder Metallurgy Association et al. | 2004
53
Flow properties of Aluminium based powders for powder metallurgy
Falticeanu, L. C. / Chang, I. T. H. / Cook, R. / Kearns, M. A. / European Powder Metallurgy Association et al. | 2004
53
Powder Metallurgy and Spray Formed 10% V Cold Work Tool Steels, A Comparison
Mesquita, R. A. / Barbosa, C. A. / European Powder Metallurgy Association et al. | 2004
53
Processing Conditions for High Strength PM Steels Alloyed with Chromium
Berg, S. / Hoganas, A. B. / European Powder Metallurgy Association et al. | 2004
53
Evolution and Consolidation of Al-Ti Powders with Respect to Milling Time
Cuevas, F. G. / Montes, J. M. / Cintas, J. / Gallardo, J. M. / European Powder Metallurgy Association et al. | 2004
55
Dimensional Control at Sintering of Powder Capillary Structures of Loop Heat Pipes
Maziuk, V. V. / Sheleg, V. K. / European Powder Metallurgy Association et al. | 2004
59
Production and Properties of Oxide Dispersion Strengthened Metal-Matrix-Composite Powders for Thermal Spray Coatings
Lugscheider, E. / Zwick, J. / European Powder Metallurgy Association et al. | 2004
59
Static and Fatigue Properties of Cold and Warm Compacted Alumix 431 Alloy (Al-5.5 Zn-2.5 Mg-1.5 Cu)
Eksi, A. K. / Velti, G. / Petzoldt, F. / Lipp, K. / Sonsino, C. M. / European Powder Metallurgy Association et al. | 2004
59
Ultrasonic Atomization of Metallic Melts: Modelling and Case Studies
Caccioppoli, G. / Clausen, B. / Bonjour, C. / Hofmann, H. / European Powder Metallurgy Association et al. | 2004
61
Warm Compaction Effects on the Mechanical Behaviour of Sintered Steels
Bris, J. / Benitez, F. / Anglada, M. / Calero, J. A. / Llanes, L. / European Powder Metallurgy Association et al. | 2004
61
A New Phenomenological Equation for Analyzing Sintering Kinetics
Nikolic, M. V. / European Powder Metallurgy Association et al. | 2004
65
A Structural Model of Hot Deformation to Obtain Bimetal "Steel-Bronze" with Powder Working Layer
Dorofeyev, V. Y. / Dorofeyev, Y. G. / European Powder Metallurgy Association et al. | 2004
65
Powder Production from Melts by Controlled Gas Atomisation
Fritsching, U. / Huang, Z. / Czisch, C. / Markus, S. / European Powder Metallurgy Association et al. | 2004
65
The microstructure characteristics of PM hypereutectic AISiNi alloy
Lazar, P. / Durisin, J. et al. | 2004
65
The Microstructure Characteristics of PM Hypereutectic AlSiNi alloy
Lazar, P. / Durisin, J. / European Powder Metallurgy Association et al. | 2004
67
Mechanical Properties of Components made from Fe(Cr,Mo) PM Steels
Sigl, L. S. / Delarbre, P. / European Powder Metallurgy Association et al. | 2004
67
Sintering Behaviour of Coated Particles Investigated by a Sintering Model
Flemmig, K. / Wieters, K.-P. / Kieback, B. / European Powder Metallurgy Association et al. | 2004
71
Centrifugal - Gas Atomization: Preliminary Investigation of the Method
Lagutkin, S. / Uhlenwinkel, V. / Achelis, L. / Pulbere, S. / Sheikhaliev, S. / European Powder Metallurgy Association et al. | 2004
71
Enhanced Sintering of MA Al with Silicon Additives
Herrera, E. J. / Rodriguez, J. A. / Fuentes, J. J. / European Powder Metallurgy Association et al. | 2004
71
Hot Explosive Consolidation of Clad W-Cu Composition Powders
Peikrishvili, A. / Kecskes, L. / Japaridze, L. / Chikhradze, N. / Tsiklauri, M. / Dalakishvili, N. / European Powder Metallurgy Association et al. | 2004
73
Realtime Sintering Observations in W-Cu system: Accelerated Rearrangement Densification via Copper Coated Tungsten Powders Approach
Ozkal, B. / Upadhyaya, A. / Ovecoglu, M. L. / German, R. M. / European Powder Metallurgy Association et al. | 2004
75
Single Pressed Single Sintered PM Products for High Density, High Performance Applications
Poszmik, G. / Marucci, M. L. / Narasimhan, K. S. / European Powder Metallurgy Association et al. | 2004
77
Development of Powder Metallurgical Aluminium Alloys and Applied Processes
Arnhold, V. / Balzer, H. / DeCristofaro, N. / Kruzhanov, V. / Laux, M. / Lindenau, R. / European Powder Metallurgy Association et al. | 2004
77
Mechanical Properties of Sintered and Cold-Forged Full Density Materials
Nakamura, N. / Uenosono, S. / Fujinaga, M. / Koizumi, S. / Anma, H. / Yoshimura, T. / European Powder Metallurgy Association et al. | 2004
77
Crucible- and Ceramic-Free Melting and Atomization of Ti-Based Alloys
Gerling, R. / Schimansky, F. P. / European Powder Metallurgy Association et al. | 2004
81
Properties of Sintered Steels from Mixture of Alloyed and Non-Alloyed Iron Powders
Brandusan, L. / Arghir, G. / Orban, R. / Domsa, S. / European Powder Metallurgy Association et al. | 2004
81
Densification Kinetics and Sintering Diagram at Final Stage Sintering
Kang, S.-J. L. / Jung, Y.-I. / European Powder Metallurgy Association et al. | 2004
83
Copper Powders of Controlled Morphology and Particle Size by Wet Chemical Methods
Edtmaier, C. / European Powder Metallurgy Association et al. | 2004
83
Characterisation of Aluminium Foams obtained through Solar Energy Foaming Treatment
Cambronero, L. E. G. / Ruiz-Roman, J. M. / Canadas, I. / Corpas, F. A. / Martinez, D. / European Powder Metallurgy Association et al. | 2004
83
Identification Models of Powder Densification using in situ HIP Dilatometer
Fondere, J. P. / Federzoni, L. / Burlet, H. / Raisson, G. / European Powder Metallurgy Association et al. | 2004
87
Kinetic Equations for Densification, Grain Growth and Diffusion Alloying at Liquid-Phase Sintering of Multi-Component Systems
Skorokhod, V. V. / European Powder Metallurgy Association et al. | 2004
87
Wear Behaviour in Dry Sliding at High Temperature in Low Alloyed Cr-Mo Sintered Steels after Heat and Thermo Chemical Treatment
Campos, M. / Billa, I. / Torralba, J. M. / European Powder Metallurgy Association et al. | 2004
89
Actual Improvements of Ceramic-Free Metal Powder Production
Pleier, S. / Hohmann, M. / Goy, W. / Schaub, B. / European Powder Metallurgy Association et al. | 2004
89
Influence of the Precursor Manufacturing Conditions on Al-7Si-1 Mg Foam Properties
Cambronero, L. E. G. / Ruiz-Roman, J. M. / Gamboa, R. / Ruiz-Prieto, J. M. / European Powder Metallurgy Association et al. | 2004
89
Innovative PM + HIP Route for the Production of Glass Moulds
Pierronnet, M. / Moraux, J.-Y. / Raisson, G. / European Powder Metallurgy Association et al. | 2004
93
The effect of processing variables on the mechanical properties of Ni-free PM steels
Sulowski, M. / Cias, A. / European Powder Metallurgy Association et al. | 2004
95
Novel Process for High Porosity Closed Cell Metal Foams Production
Shimizu, T. / Matsuzaki, K. / European Powder Metallurgy Association et al. | 2004
95
Sintering behaviour of Al-SiC powder mixtures controlled by dilatometry
Pieczonka, T. / Gacsi, Z. / Kretz, F. / Kovacs, J. / European Powder Metallurgy Association et al. | 2004
97
Method for Optimising the Productivity of the Ball Mills
Sparchez, Z. / European Powder Metallurgy Association et al. | 2004
99
A New Family of Wear Resistant Tribological Steels
Calero, J. A. / Cabestany, F. / Marce, R. / European Powder Metallurgy Association et al. | 2004
101
Preparation and properties of high temperature stable NiAl and Inconel-based foams
Böhm, Alexander / Walther, Gunnar / Naumann, Dirk / Croset, Michel / Barhout, Jean-Dominique / Bienvenu, Yves et al. | 2004
101
Microwave assisted sintering of metallic materials
Schmidt, J. / Schubert, T. / Weissgarber, T. / Kieback, B. / European Powder Metallurgy Association et al. | 2004
101
Copper and Carbon on Mechanical Properties of Iron - Carbon - Copper Alloys for PM Forging Applications
Ilia, E. / Tutton, K. / O Neill, M. / European Powder Metallurgy Association et al. | 2004
105
Development of Technologies to Produce Iron-Based Powders from Indian `Blue Dust'
Fedorov, D. / Karanjai, M. / Sivakumar, A. / European Powder Metallurgy Association et al. | 2004
105
Causes of Variations in the Mechanical Properties of P/M Steels
Newkirk, J. W. / European Powder Metallurgy Association et al. | 2004
107
Nanoindenter Measurements for the Determination of the Mechanical Properties of Hollow Sphere Structures
Studnitzky, T. / Andersen, O. / European Powder Metallurgy Association et al. | 2004
107
Effects of microwaves on sintering processes
Veltl, G. / Petzoldt, F. / Pueschner, P. A. / European Powder Metallurgy Association et al. | 2004
109
Laser Re-melting of Prealloyed Steel Powders to High Density
Wright, C. S. / Akhtar, S. P. / Youseffi, M. / Hauser, C. / Childs, T. H. C. / Xie, J. / Fox, P. / European Powder Metallurgy Association et al. | 2004
111
Development of Safe Production System for Mg-Zn-Re Rapidly Solidified Flaky Powders
Hitoshi, O. / Takashi, O. / Nobuyuki, I. / Motonori, N. / European Powder Metallurgy Association et al. | 2004
111
Assessment of Fatigue Lifetime of PM-Parts
Kraft, T. / Riedel, H. / European Powder Metallurgy Association et al. | 2004
113
Centrifugal Induction Sintering of Metallic Powders Coatings
Gafo, Y. N. / Sosnovskij, I. A. / Kashitsyn, L. P. / European Powder Metallurgy Association et al. | 2004
113
Reinforced Aluminium Foam Profiles
Simancik, F. / Florek, R. / Tobolka, P. / European Powder Metallurgy Association et al. | 2004
115
Production and Properties of Dense Iron Based Parts produced by Laser Melting with Plasma Formation
Rombouts, M. / Froyen, L. / Kruth, J.-P. / Van Vaerenberg, J. / Mercelis, P. / European Powder Metallurgy Association et al. | 2004
117
Effect of Porosity and Microstructural Inhomogeneities on the Fatigue Crack Growth Response of a Sinter-Hardenable Hybrid PM Steel
Akaslan, S. / Saritas, S. / Causton, R. J. / James, W. B. / Murphy, T. F. / Lawley, A. / European Powder Metallurgy Association et al. | 2004
117
Production of Stainless Steel Powders by Advanced Steelmaking Technology
Schade, C. T. / Schaberl, J. / European Powder Metallurgy Association et al. | 2004
119
Investigations on the Expansion Behaviour of Granulated Foamable Precursor Material
Baumeister, J. / Stobener, K. / European Powder Metallurgy Association et al. | 2004
121
Improvement of Cobalt Distribution in WC-Co-Agglomerates by Plasma Treatment in a Dual Stage Fluidised Bed Reactor
Tap, R. / Willert-Porada, M. / European Powder Metallurgy Association et al. | 2004
123
Extending the Scope of Material Properties for Direct Metal Laser Sintering
Petzoldt, F. / Pohl, H. / Simchi, A. / European Powder Metallurgy Association et al. | 2004
125
Pseudo-Superplastic PM Processing of Ti-SiC Ceramics Composites
Miyano, N. / Iwasa, H. / Isonishi, K. / Ameyama, K. / European Powder Metallurgy Association et al. | 2004
125
Structural Engineering of High-Porous PM Materials
Podrezov, Y. N. / European Powder Metallurgy Association et al. | 2004
127
Industrial Viability of Microwave Sintering
Willert-Porada, M. / European Powder Metallurgy Association et al. | 2004
127
Ultra high cycle fatigue behaviour of high density PM alloy steels
Xu, C. / Weiss, B. / Khatibi, G. / Danninger, H. / European Powder Metallurgy Association et al. | 2004
129
Direct Metal Laser Sintering - from Rapid Prototyping to Series Production
Kotila, J. / Nyrrhila, O. / Syvanen, T. / Hanninen, J. / European Powder Metallurgy Association et al. | 2004
131
Particle Modification and Powder Design using the NARA-Hybridizer
Bohm, A. / Buttner, T. / Weissgarber, T. / Kieback, B. / Pieper, W. / European Powder Metallurgy Association et al. | 2004
131
Molybdenum Hollow Sphere Structures for High Temperature Applications
Farber, J. / Bojack, A. / Stoiber, M. / Plankensteiner, A. / Goehler, H. / Schneidereit, H. / European Powder Metallurgy Association et al. | 2004
133
Bending Fatigue of a High Performance PM Steel
Wassenberg, R. B. / Nurol, O. F. / Beiss, P. / European Powder Metallurgy Association et al. | 2004
135
Metal Printing Process-Development of a New Rapid Manufacturing Process for Metal Parts
van der Eijk, C. / Karlsen, R. / Asebo, O. / Mugaas, T. / Kolnes, O. / Skjevdal, R. / Sallom, Z. / European Powder Metallurgy Association et al. | 2004
137
Nanosize Mo Powder as an Alloying Additive to Sintered Structural Steels
Gierl, C. / Danninger, H. / Jha, S. / European Powder Metallurgy Association et al. | 2004
137
Plasma Assisted Debinding and Sintering: Process and Equipment
Wendhausen, P. A. P. / Muzart, J. L. R. / Klein, A. N. / Fusao, D. / Mendes, L. A. / Ristow, W. / Machado, R. / European Powder Metallurgy Association et al. | 2004
137
Regular Metal Foams produced by Expandable Polystyrene Technology
Reinfried, M. / Waag, U. / Stephani, G. / Kieback, B. / European Powder Metallurgy Association et al. | 2004
139
Diffusion Alloyed Powders with High Fatigue Performance in the As-sintered State
Alzati, L. / Bergmark, A. / European Powder Metallurgy Association et al. | 2004
141
Direct Metal Laser Sintering of Titanium Alloy
Pohl, H. / Petzoldt, F. / Terada, M. / Kakuichi, E. / Kanazawa, I. / European Powder Metallurgy Association et al. | 2004
143
Sintering of Multilayered Copper Wires in a Solar Furnace
Candas, I. / Martinez, D. / Rodriguez, J. / Gallardo, J. M. / European Powder Metallurgy Association et al. | 2004
143
Cellular Structures Based on Metallic Hollow Spheres - Mechanical and Acoustical Properties
Waag, U. / Stephani, G. / Farber, J. / Venghaus, H. / Bingel, G. / European Powder Metallurgy Association et al. | 2004
143
Preparing nano-crystalline rare earth doped WC/Co powder by high energy ball milling
Liu Sha / Huang, Ze-Lan / Liu Gang / Yang, Gui-Bin et al. | 2004
143
Preparing Nano-Crystalline Rare Earth Doped WC/Co Powder by igh Energy Ball Milling
Sha, L. / Ze-Lan, H. / Gang, L. / Gui-Bin, Y. / European Powder Metallurgy Association et al. | 2004
147
MELATO® - A New Process Chain for Rapid Tool Manufacturing
Techel, A. / Himmer, T. / Nowotny, S. / European Powder Metallurgy Association et al. | 2004
147
Notch Fatigue Tests on a Hybrid Alloy PM Steel
Gant, A. J. / Roebuck, B. / James, W. B. / European Powder Metallurgy Association et al. | 2004
149
Microwave Sintering of Non-Ferrous Alloys
Tiwari, S. K. / Ravikiran, U. / Upadhyaya, A. / European Powder Metallurgy Association et al. | 2004
149
Decomposition Behaviour of As-Received and OxidizedTiH~2 Powder
Matijasevic, B. / Fiechter, S. / Zizak, I. / Gorke, O. / Wanderka, N. / Schubert-Bischoff, P. / Banhart, J. / European Powder Metallurgy Association et al. | 2004
151
Element addition effect on hydrogenation and dehydrogenation temperatures of Mg activated by a ball milling process
Hashimoto, H. / Sun, Z. M. / Abe, T. / European Powder Metallurgy Association et al. | 2004
153
Fatigue Crack Growth of Sintered Steels with a Heterogeneous Microstructure
Piotrowski, G. / Deng, X. / Chawla, N. / Narasimhan, K. S. / European Powder Metallurgy Association et al. | 2004
153
Binder Technology for Large Metal Parts produced using Three-Dimensional Printing
Liu, J. / Kuhn, H. / Rynerson, M. / Morvan, S. / European Powder Metallurgy Association et al. | 2004
155
Effect of Post-Sintering Heat Treatment on Porous Tungsten in relation to Sintering Swelling
Selcuk, C. / Morley, N. / Wood, J. V. / European Powder Metallurgy Association et al. | 2004
157
Comparison of Porous Materials Properties made from Sponge Titanium Powders produced by Different Methods
Savich, V. V. / Pilinevich, L. P. / Tumilovich, M. V. / European Powder Metallurgy Association et al. | 2004
157
Metal Powders produced by Mechanical Methods
Kulu, P. / Goljandin, D. / Peetsalu, P. / European Powder Metallurgy Association et al. | 2004
159
Influence of Plasma Nitriding on the Axial Fatigue Behaviour of Astaloy CrM
Straffelini, G. / Puscas, T. M. / Molinari, A. / European Powder Metallurgy Association et al. | 2004
161
Controlled Porosity Levels in PM Stainless Steel Tooling
Novotnak, D. J. / Lherbier, L. W. / European Powder Metallurgy Association et al. | 2004
163
Densification of Porous Tungsten by Low Temperature Sintering
Selcuk, C. / Morley, N. / Wood, J. V. / European Powder Metallurgy Association et al. | 2004
163
A Study on the Active Material FeS~2 in Battery Fabricated by Mechanical Alloying
Shup, A. I. / Woo-Hyun, J. / Hyo-Jun, A. / Dong-Kyu, P. / European Powder Metallurgy Association et al. | 2004
163
Effectiveness of Application of Porous Powder Materials for Separation of Water from Petroleum Products
Savich, V. V. / Pilinevich, L. P. / Tumilovich, M. V. / Petracov, A. V. / European Powder Metallurgy Association et al. | 2004
165
Chromium Containing Materials for High Strength-High Fatigue Applications
King, P. / European Powder Metallurgy Association et al. | 2004
167
A New Process for Making High Density Parts
Semel, F. J. / European Powder Metallurgy Association et al. | 2004
169
Reactive Sintering of Porous Tungsten for Higher Homogeneity to be used as a High Current Density Cathode
Selcuk, C. / Morley, N. / Wood, J. V. / European Powder Metallurgy Association et al. | 2004
169
New High Productive Catalysts in the Base of Cell Materials
Leonov, A. / Romashko, A. N. / Sheleg, V. K. / European Powder Metallurgy Association et al. | 2004
171
Design of PM-Gears Based on Local Bending and Rolling Contact Fatigue Data
Lipp, K. / Sonsino, C. M. / European Powder Metallurgy Association et al. | 2004
171
Mechanical Alloying Mixtures of Solid and Liquid Metals
Savitskii, A. P. / Grigorieva, T. F. / Barinova, A. P. / Ivanov, E. Y. / Boldyrev, V. V. / European Powder Metallurgy Association et al. | 2004
175
Production of Porous Metal Materials by Injection and Extrusion Moulding
Matsuzaki, S. / Ishida, M. / Tanaka, S. / Nishiyabu, K. / European Powder Metallurgy Association et al. | 2004
177
Granule Formation Kinetics in the Process of Mechanical Alloying and their Influence upon the Properties of Materials Cu-Al-O-C AND Cu-Ti-O-C
Dovydenkov, V. A. / Simonov, V. S. / Shalunov, Y. P. / Yarmolyk, M. V. / European Powder Metallurgy Association et al. | 2004
177
Study of the Liquid Phase Sintering in the Cu-Sn System by Thermal Analysis
Menapace, C. / Costa, P. / Molinari, A. / European Powder Metallurgy Association et al. | 2004
177
Alternative Process for Consolidation of Aluminium Based Metallic and Metal Matrix Composite PM Parts
Kleiner, S. / Beffort, O. / European Powder Metallurgy Association et al. | 2004
179
Influence of secondary Operations on Mechanical Properties of Low Alloyed Sintered Steel
Kanno, K. / Takeda, Y. / Bergmark, A. / Alzati, L. / Lindqvist, B. / Ueda, Y. / Kanda, K. / Zandonati, A. / European Powder Metallurgy Association et al. | 2004
181
Fabrication of in-situ TiCr~2 Particulate Reinforced Titanium Based Alloys by Hot Pressing with Mechanically Alloyed Raw Powders
Xiao, P. / Qu, X. / Brandusan, L. / European Powder Metallurgy Association et al. | 2004
183
Development of Porous Composite Membranes for Microfiltration Devices
Bram, M. / Buchkremer, H. P. / Stover, D. / European Powder Metallurgy Association et al. | 2004
183
Composite porous permeable material with anisotropy structure being produced by synthesis-sintering technique
Vityaz, P. A. / Ilyuschenko, A. P. / Belyaev, A. V. / Kusin, R. A. / Kaptsevich, V. M. / European Powder Metallurgy Association et al. | 2004
185
An Accurate Model for Industrial PM Compaction
Shamasundar, S. / Babu, K. N. / European Powder Metallurgy Association et al. | 2004
185
Quantitative Expression of Fractured Surface of Sinter-forged Steels
Kawai, N. / Futagawa, T. / European Powder Metallurgy Association et al. | 2004
189
Characterisation of Fe-TiCN powders prepared by high-energy milling
Busquets, D. / Gordo, E. / Gomez, B. / Amigo, V. / Torralba, J. M. / European Powder Metallurgy Association et al. | 2004
189
Kinetics for Diffusion of Alloying Elements into Fe-Base Particles during Sintering - Application to Alloy Element Redistribution of Mixtures of Fe-2Cr, Fe-2Mn, Fe-2Mo and Fe-2Ni
Wikman, S. / European Powder Metallurgy Association et al. | 2004
189
Direct Typing - a New Method for the Production of Cellular P/M Parts
Andersen, O. / Studnitzky, T. / Bauer, J. / European Powder Metallurgy Association et al. | 2004
189
Kinetics for diffusion of alloying elements into Fe-base particles during sintering - application to alloy element redistribution of mixtures of Fe-2Cr, Fe-2Mn and Fe-2Ni
Wikman, Stefan et al. | 2004
191
Evaluation of Critical Pressure During Thermal Debinding
Binet, C. / Zauner, R. / Heaney, D. / European Powder Metallurgy Association et al. | 2004
193
Fractography of Sintered Steels: A Review
Dudrova, E. / Kabatova, M. / European Powder Metallurgy Association et al. | 2004
195
Mechanically Alloyed Heat Resistant Materials Theory and Manufacturing Technology
Lovshenko, F. / Lovshenko, G. / European Powder Metallurgy Association et al. | 2004
195
Porous Sintered Metal for Diesel Soot Filtration
Steigert, S. / European Powder Metallurgy Association et al. | 2004
197
Computer Modelling of Pore and Particle Shape Change during Compaction of Powder Materials in a Rigid Die using Finite Element Method
Gorokhov, V. M. / Ustinova, G. P. / European Powder Metallurgy Association et al. | 2004
197
Fabrication process and shape-memory effect of NiTi alloys synthesized from Ni/TiH~2 powder mixture
Bertheville, B. / Bidaux, J.-E. / European Powder Metallurgy Association et al. | 2004
199
Microstructural Features of Laser Sintered Steel Powders
Simchi, A. / Petzoldt, F. / Pohl, H. / European Powder Metallurgy Association et al. | 2004
201
Preparation and Properties of Carbon Nanotube MMCs
Edtmaier, C. / Wallnoefer, E. / Koeck, A. / European Powder Metallurgy Association et al. | 2004
201
mproved tolerances by optimized powder mixes
Larsson, M. / Edman, D. / European Powder Metallurgy Association et al. | 2004
203
In Situ Evaluation of Viscosity during Sintering of Boron Doped Stainless Steel using Bending Beam Technique
Bollina, R. / German, R. M. / European Powder Metallurgy Association et al. | 2004
203
Pressure - Density Relation for a Metallic Powder undergoing Die Compaction
Kupkova, M. / Kupka, M. / European Powder Metallurgy Association et al. | 2004
205
Effect of Post-Sintering Cooling Rate on Properties of Diffusion Bonded Steel Materials
Chagnon, F. / Tremblay, L. / European Powder Metallurgy Association et al. | 2004
207
On the Development of Warm Compaction for Aluminum Alloys
Simchi, A. / Veltl, G. / European Powder Metallurgy Association et al. | 2004
207
Investigation of the Optimization of Powder Properties in a FN-0208 Binder Treated Powder
Sawayama, T. / European Powder Metallurgy Association et al. | 2004
209
Computer Simulation of Die Compaction: Guidelines and An Example from the European Dienet Project
Coube, O. / Chen, Y. / Imbault, D. / Doremus, P. / Maassen, R. / Federzoni, L. / Jonsen, P. / Tweed, J. / Gethin, D. / Rolland, S. et al. | 2004
211
Industrial Performance of Low Reactive Atmospheres on Sintering Furnaces
Bockel-Macal, S. / Davin, H. / Domergue, D. / Hofmann, B. / Kruzhanov, V. / European Powder Metallurgy Association et al. | 2004
211
The Hardenability of PM Steels: Correspondence between Microhardness, Microstructure and Cooling Speed of Jominy Probes
Bocchini, G. F. / Ienco, G. / Parodi, A. / Pellati, G. / Rivolta, B. / Silva, G. / Stagno, E. / European Powder Metallurgy Association et al. | 2004
213
Analysis of the Parameters that Influence the Contamination of the Powders obtained by Mechanical Alloying/Milling
Sparchez, Z. / Chicinas, I. / European Powder Metallurgy Association et al. | 2004
215
Numerical Simulation of the Double-Step Pressing of a Simplified Gear
Coube, O. / Andrieux, F. / Riedel, H. / European Powder Metallurgy Association et al. | 2004
217
Integral Work of Sintering Concepts Applied to Liquid Phase Sintering Densification, Distortion, and Microstructure Evolution
German, R. M. / Blaine, D. / Suri, P. / Chung, S.-H. / Park, S.-J. / European Powder Metallurgy Association et al. | 2004
219
Recycling of EAF Dust by Semi-Continuous High Kinetic Process
Zoz, H. / Kaupp, G. / Ren, H. / Goepel, K. / Tian, Z. / Naimi-Jamal, M. R. / Jaramillo V, D. / European Powder Metallurgy Association et al. | 2004
219
Quantifying the Degree-of-Sinter in Ferrous P/M Materials
Murphy, T. F. / European Powder Metallurgy Association et al. | 2004
223
Deformation of Warm-pressed Steel Powder Compacts during Delubrication and Sintering: Correlation between Dimensional Measurement and Microtomography Observations
Vagnon / Kapelski, G. / Di Michiel, M. / Bellet, D. / Josserond, C. / Bouvard, D. / European Powder Metallurgy Association et al. | 2004
223
Validation data for modelling of powder compaction: Guidelines and an example from the European DIENET project
Tweed, J. H. / Calero, J. A. / Maassen, R. / Markeli, W. / Brewin, P. / European Powder Metallurgy Association et al. | 2004
225
Porosity Evaluation for Sintered and Heat Treated High Performance Steels
Blanco, L. / Campos, M. / Torralba, J. M. / European Powder Metallurgy Association et al. | 2004
225
Deposition of Tin onto Aluminum Powder in its Self-Convective Motion by DC Sputtering
Sonoda, T. / Katou, K. / Jeon, I. / Yamada, Y. / Asahina, T. / European Powder Metallurgy Association et al. | 2004
229
Study of Particle Rearrangements during Sintering Processes by Microfocus Computer Tomography (□CT)
Nothe, M. / Pischang, K. / Poni□il, P. / Kieback, B. / Ohser, J. / European Powder Metallurgy Association et al. | 2004
229
Anisotropic Theory of Elasticity and Yield Condition for Non-Sintered Porous Bodies and Powders
Shtern, M. / European Powder Metallurgy Association et al. | 2004
229
Study of particle rearrangements during sintering processes by microfocus computer tomography (micron-CT)
Nöthe, Michael / Pischang, Karsten / Ponizil, Petr / Kieback, Bernd / Ohser, Joachim et al. | 2004
231
Structure and Properties of Powder Structural Steels Alloyed with Manganese
Maslyuk, V. A. / Napara-Volgina, S. G. / Orlova, L.-N. / European Powder Metallurgy Association et al. | 2004
231
ECKA Discup® - New High Performance PM-Copper-Materials Process, Properties and Applications
Hofmockel, M. / Neubing, H.-C. / European Powder Metallurgy Association et al. | 2004
235
Multi-Scale Analysis of Sintering Shrinkage Anisotropy
Olevsky, E. A. / Kushnarev, B. / Maximenko, A. L. / European Powder Metallurgy Association et al. | 2004
235
A Simple Method of Relating Stereological Parameters Modelling Hard Metal Structures
Buriti, A. C. / da Silva, A. G. P. / Gomes, U. U. / de Souza, C. P. / European Powder Metallurgy Association et al. | 2004
237
Advanced PM Aluminium Alloys Produced by New Rapid Solidification Technology
Neikov, O. D. / Krajnikov, A. V. / Milman, Y. V. / Thompson, G. / Sameljuk, A. V. / Sirko, A. I. / Chaykina, N. G. / European Powder Metallurgy Association et al. | 2004
237
Effect of Manganese Donor on Properties of Fe-Cr-Mn-Mo-C Steels
Salak, A. / Selecka, M. / Parilak, L. / Cajka, A. / European Powder Metallurgy Association et al. | 2004
241
Influence of Metals on Diamond and Nanodiamond to Graphite Phase Transformation
Nozhkina, A. V. / European Powder Metallurgy Association et al. | 2004
241
The Effect of Process Parameters on the Ejection of Powder Compacts
Gethin, D. T. / Korachkin, D. / Tweed, J. H. / Guyoncourt, D. M. M. / European Powder Metallurgy Association et al. | 2004
243
Research of high quality iron powder obtaining by methods of hydrogen annealing
Bondarenko, B. I. / Khovavko, A. I. / European Powder Metallurgy Association et al. | 2004
243
Mechanical Properties of High Strength PM Steels: Considerations about Composition and Processing Conditions
Roure, S. / Blanchard, P. / European Powder Metallurgy Association et al. | 2004
247
Spark plasma preparation of Mg2Sii and Mg2Si-Mg composite
Reinfried, N. / Schmidt, J. / Kieback, B. / Grin, Y. et al. | 2004
249
Microstructure and Properties of Cu-Infiltrated Chromium-Molybdenum Steels
Cambronero, L. E. G. / Ruiz-Roman, J. M. / Ruiz-Prieto, J. M. / European Powder Metallurgy Association et al. | 2004
249
New Types of Titanium Powders: Properties and Applications
Griga, J. / Petrunko, A. / Drozdenko, V. / Andreev, A. / Yatsenko, A. / European Powder Metallurgy Association et al. | 2004
249
Modelling of PM Processes using Backpropagation Algorithm
Drndarevic, D. / Djuricic, M. / Panic, S. / European Powder Metallurgy Association et al. | 2004
253
Fabrication of Dense Aluminum Shoulder Component through Traveling Zone Sintering Method
Tada, S. / Sun, Z. M. / Hashimoto, H. / Abe, T. / European Powder Metallurgy Association et al. | 2004
255
Particulate Models for Powder Compaction
Gethin, D. T. / Lewis, R. W. / Ransing, R. S. / Yang, X. S. / Rowe, R. W. / European Powder Metallurgy Association et al. | 2004
255
Development of a High Performance Nickel-Free P/M Steel
Lindsley, B. / European Powder Metallurgy Association et al. | 2004
255
Two-Stages Scheme of Carbonless Iron Powder Production in Hydrogen Atmosphere with its Recirculation
Bondarenko, B. I. / Khovavko, A. I. / European Powder Metallurgy Association et al. | 2004
259
Consolidation of Metal Powders by Electrical Resistance Sintering: A Qualitative Model
Montes, J. M. / Cintas, J. / Cuevas, F. G. / Rodriguez, J. A. / European Powder Metallurgy Association et al. | 2004
261
Advances in Titanium Alloy Powder Processing
Ward-Close, C. M. / Godfrey, A. B. / Thompson, S. R. / European Powder Metallurgy Association et al. | 2004
261
Low C-Cu-Ni-Mo Alloy Structural Sintered Steels with Small Titanium Additions
Orban, M. / European Powder Metallurgy Association et al. | 2004
261
Analysis of Powder/Tool Friction in Closed Die Test
Doremus, P. / Shtern, M. / Cocks, A. / Guyoncourt, D. / Tweed, J. / Riera, M. D. / Prado, J. M. / Brewin, P. / European Powder Metallurgy Association et al. | 2004
265
Fabrication of Ti-Ni Alloy Powder by Mechanical Alloying and Its Shape Memory Characteristics
Kyogoku, H. / Terayama, A. / Komatsu, S. / European Powder Metallurgy Association et al. | 2004
267
Properties of High Density Diffusion Bonded Alloys
Donaldson, I. W. / Marucci, M. L. / European Powder Metallurgy Association et al. | 2004
267
Environmental Upgrade in the Metal Powder Industry
Pettersson, H. / European Powder Metallurgy Association et al. | 2004
269
Microstructures control to strengthen light metals by repeated plastic working in cold compaction
Kondoh, Katsuyoshi / Kamado, Shigeharu / Tsuzuki, Ritsuko / Aizawa, Tatsuhiko et al. | 2004
269
Die Compaction Simulation: Routes to Sustainability
Brewin, P. / Federzoni, L. / European Powder Metallurgy Association et al. | 2004
271
Influence of the plasma phenomena on process Sintering of powders by Electric Discharge
Beljavin, K. / Minko, D. / Kuznechik, O. / European Powder Metallurgy Association et al. | 2004
273
Thermochemical Treatments of the Grinding Recovered Metallic Powder Parts
Didu, M. / Teisanu, C. / Ciupitu, I. / European Powder Metallurgy Association et al. | 2004
275
Ferro-Manganese using as Master Alloy in the Manganese Structural Sintered Steels Elaboration
Sechel, N. / Orban, R. L. / European Powder Metallurgy Association et al. | 2004
277
On the Local Contact Behaviour during Cold Compaction of Composite Powders
Skrinjar, O. / Larsson, P.-L. / European Powder Metallurgy Association et al. | 2004
277
Research Regarding Self-Lubricating Iron Base Alloys Processed by SPS Technology
Teisanu, C. / Reinfried, N. / Didu, M. / Ciupitu, I. / European Powder Metallurgy Association et al. | 2004
279
Morphological and microstructural characteristics of metal powders for DMLS
Sustarsic, B. / Dolinsek, S. / Kosec, L. / Skraba, P. / Medved, J. / European Powder Metallurgy Association et al. | 2004
281
Performance Benefits in Sintered Steels with Extra-Fine Nickel Powder
Stephenson, T. F. / Singh, T. / Campbell, S. T. / European Powder Metallurgy Association et al. | 2004
285
Modelling of a Process for Applying a Wear Resistant Coating
Sosnovsky, A. V. / Babushkin, I. V. / Shirokij, I. V. / Vitiaz, A. A. / European Powder Metallurgy Association et al. | 2004
285
Effect of Composition on Phase Transformations and Regimes of Thermal Treatment of Infiltrated Materials on the Base of Powdered Steels
Dyachkova, L. N. / Kerzhentseva, L. F. / European Powder Metallurgy Association et al. | 2004
287
Development of boron nitride reinforced aluminium matrix composites by powder metallurgy.
Gomez, L. / Busquets-Mataix, D. / Amigo, V. / Salvador, M.D. / Vicinte, A. et al. | 2004
287
Synthesis of TaC from Ammonium Tantalum Tartrate {(NH~4)~3TaO(C~4O~6) · nH~2O} by Gas-Solid Reaction in Rotary Cylinder Reactor
de Souza, C. P. / de Medeiros, F. F. P. / Fontes, F. A. O. / Carvalho, R. H. R. / Gomes, U. U. / European Powder Metallurgy Association et al. | 2004
289
Mechanical Properties, Microstructures and Fractography of Low-Alloyed Chromium - Molybdenum - Manganese P/M Steels
Strobl, S. / Kabatova, M. / European Powder Metallurgy Association et al. | 2004
291
Sintering and Sinter-Hardening of Low Alloyed Steels in Vacuum
Molinari, A. / Stoyanova, V. / European Powder Metallurgy Association et al. | 2004
291
3-D simulation of particle acceleration and heating under TBC plasma spraying
Kundas, S. P. / Kashko, T. A. / Markovnik, D. V. / Reut, O. P. / European Powder Metallurgy Association et al. | 2004
293
Copper carbon composites based on PVD (physical vapor deposition) coated reinforcements
Neubauer, E. / Eisenmenger-Sittner, C. / Bangert, H. / Korb, G. / Smid, I. et al. | 2004
295
Grain coarsening behaviour of nanocrystalline Fe-Si-X powders
Sritharan, T. / Zuo, B. / Hng, H.H. et al. | 2004
295
Grain Coarsening Behaviour of Nanocrystlaline Fe-Si-X Powders
Sritharan, T. / Zuo, B. / Hng, H. H. / European Powder Metallurgy Association et al. | 2004
295
Heat Treatment of Low Alloyed Chromium Sintered Steels
Stoyanova, V. / Molinari, A. / European Powder Metallurgy Association et al. | 2004
297
Calculations And Experimental Studies on In Situ TiC
Weber, S. / Berns, H. / European Powder Metallurgy Association et al. | 2004
297
Development of PM Manganese Steels
Sulowski, M. / European Powder Metallurgy Association et al. | 2004
301
Mechanical Properties of Fe-0.85Mo-Mn-C Steels
Selecka, M. / Stoyanova, V. S. V. / Molinari, A. / European Powder Metallurgy Association et al. | 2004
301
Composite materials based on EN AW-2124 aluminium alloy reinforced with the Ti(C,N), BN or AI2O3 ceramic particles
Dobrzanski, Leszek A. / Wlodarczyk, Anna / Adamiak, Marcin et al. | 2004
301
NiAl and Ni Micro/nano Powders obtained by Powder Metallurgy Processings
Lucaci, M. / Gavriliu, S. / Lungu, M. / Bara, A. / Vida Simiti, I. / Roman, I. / European Powder Metallurgy Association et al. | 2004
303
A Review of Current Sinter-Hardening Technology
Marucci, M. L. / Fillari, G. / King, P. / Narasimhan, K. S. / European Powder Metallurgy Association et al. | 2004
305
Numerical simulation of powder filling processes using the particle finite element method
Oliver, J. / Cante, J. C. / Gonzalez, C. / European Powder Metallurgy Association et al. | 2004
307
Nano-structured (Ti,W)(C,N) Hard Phase Powder Particles for PM Products
Eder, A. / Konigshofer, R. / Lengauer, W. / European Powder Metallurgy Association et al. | 2004
307
Development of particulate reinforced stainless steel composites
Baxter, D. / Tarrant, A. / Valle, R. et al. | 2004
307
New material and process concept for high loaded PM-components: Mechanical Properties, New Alloying Systems
Orth, P. / Danninger / Bouvier, A. / Ratzi, R. / European Powder Metallurgy Association et al. | 2004
309
Wear Resistance and Properties of Cr Mn Mo Sintered Steels
Grande, M. A. / Dudrova, E. / Kupkova, M. / Kupka, M. / Rosso, M. / European Powder Metallurgy Association et al. | 2004
311
Numerical Modelling of Powder Compaction Processes: Towards a Virtual Press
Cante, J. C. / Oliver, J. / Ferrari, C. / Calero, J. A. / Benitez, F. / European Powder Metallurgy Association et al. | 2004
313
Mechanical Properties of Mn-Cr-Mo Steels Nitrogen Sintered from Hydrocarbon-Coated Powders
Mitchell, S. C. / Wronski, A. S. / Georgiev, J. / Stoytchev, M. / European Powder Metallurgy Association et al. | 2004
315
Nanoparticle Ensemble Characterization by Hydrostatic Compression
Leshchinsky, V. / Weinert, H. / Soifer, Y. / Kedzia, L. / Ozwoniarek, J. / European Powder Metallurgy Association et al. | 2004
317
Modelling and Numerical Simulation of Powder Die Compaction with a Particle Code
Coube, O. / Henrich, B. / Moseler, M. / Riedel, H. / European Powder Metallurgy Association et al. | 2004
317
Friction Welding of MA956 Iron Based Superalloy
Ates, H. / Turker, M. / Kurt, A. / European Powder Metallurgy Association et al. | 2004
319
Study of Boron Behaviour during Sintering of Fe/Mo/B/C Alloys to Near Full Density
Sarasola, M. / Tojal, C. / Castro, F. / European Powder Metallurgy Association et al. | 2004
323
Effect of Reinforcing Volume Fraction on the Cutting Forces and Surface Roughness of Al-SiC Composites Produced by Powder Metallurgy Technique
Akoral, E. / Turker, M. / Ozcatalbas, Y. / European Powder Metallurgy Association et al. | 2004
323
Synthesis of Au and Fe Nanopowders by Microemulsion Process
Kim, Y.-J. / Yu, J.-H. / Kim, B.-K. / Ahn, J.-H. / European Powder Metallurgy Association et al. | 2004
325
Predicting the Optimum Thickness of Powder Antifriction Layers in Bimetal Bearings
Khudoley, A. L. / Goman, A. M. / European Powder Metallurgy Association et al. | 2004
327
Microstructure and corrosion behavior of sintered Cu alloyed stainless steels
Wang, J. / He, P. / He, Y. / Zhou, B. / European Powder Metallurgy Association et al. | 2004
329
Machinability Evaluation of PM Materials and Components
Romero, A. / Ratzi, R. / Miba Sinter Group / European Powder Metallurgy Association et al. | 2004
329
Preparation and Characterization of Fe Based Nanopowders Synthesized by Chemical Vapor Condensation Process
Choi, C.-J. / Kim, J.-C. / Yu, J.-H. / Kim, B.-K. / European Powder Metallurgy Association et al. | 2004
331
Optimization and Finite Element Modelling of Powder Segegation during Metal Injection Moulding
Ayad, G. / Lejeune, A. / Barriere, T. / Gelin, J. C. / European Powder Metallurgy Association et al. | 2004
335
Structure-formation and Wear-resistance of Al-Si Alloys under Surface Electric-spark Modification
Podchernyaeva, A. / Panasyuk, A. D. / Yurechko, D. V. / European Powder Metallurgy Association et al. | 2004
335
Corrosion Behaviour of Sintered Duplex Stainless Steel
Fedrizzi, L. / Molinari, A. / Felli, F. / Scicutelli, A. / Ippati, L. / Puscas, T. / Kazior, J. / European Powder Metallurgy Association et al. | 2004
335
Properties of Multiwall Carbon Nanotube-Reinforced Cu Matrix Composites
Ahn, J.-H. / Shin, H.-S. / Kim, Y.-J. / Chung, H. / European Powder Metallurgy Association et al. | 2004
337
An Experimental Investigation of Carbide/Austenite Equilibria in Commercial Tool Steels and High Speed Steels compared against Thermodynamic Calculations
Bratberg, J. / Frisk, K. / European Powder Metallurgy Association et al. | 2004
337
Fabrication of Carbon Nanotube/Cu Nanocomposites by Spark Plasma Sintering Process
Kyung-Tae, K. / Kyong-Ho, L. / Seung-Il, C. / Chan-Bin, M. / Soon-Hyung, H. / European Powder Metallurgy Association et al. | 2004
339
Improvement of Machinability by Adding `KSX' that Contains Complex Calcium Oxide Powder
Furuta, S. / Seki, Y. / Tanaka, H. / Akagi, N. / Suzuki, H. / European Powder Metallurgy Association et al. | 2004
341
Supersolidus Sintering of Boron Doped Stainless Steel Powder Compacts
Bollina, R. / German, R. M. / European Powder Metallurgy Association et al. | 2004
343
Numerical Simulation of Compacting of Powder Parts having Slant to a Pressing Direction Surfaces
Yepifantseva, T. / Mikhailov, O. / European Powder Metallurgy Association et al. | 2004
343
Solid State Synthesis of Nano-Structured Magnesium Base Thermoelectric Materials
Song, R. / Muraishi, S. / Aizawa, T. / European Powder Metallurgy Association et al. | 2004
343
Metal Injection Moulding of Heat Treated Alloy 718 Master Alloy
Davies, P. A. / Dunstan, G. R. / Hayward, A. C. / Howells, R. I. L. / European Powder Metallurgy Association et al. | 2004
345
Functional Gradient Hardmetals for Milling Applications
Lengauer, W. / Eder, A. / Dreyer, K. / van den Berg, H. / Daub, H.-W. / Kassel, D. / European Powder Metallurgy Association et al. | 2004
349
Microstructural Developments during Sintering of Mixtures of Austenitic Stainless Steels AISI 316L and Silicon Powders
Kazior, J. / Szymanska, A. / Sikorski, K. / Pieczonka, T. / Molinari, A. / European Powder Metallurgy Association et al. | 2004
349
Discrete Element Modelling of the Unloading and Failure of Green Compacts
Martin, C. L. / Bouvard, D. / European Powder Metallurgy Association et al. | 2004
349
Aluminum Heat Sink from Powder Injection Moulding
Tan, L.-K. / Tham, H.-P. / Ma, J. / European Powder Metallurgy Association et al. | 2004
351
Mechanosynthesis of Nanocomposites
Grigorieva, T. F. / Barinova, A. P. / Korchagin, M. A. / Lyakhov, N. Z. / European Powder Metallurgy Association et al. | 2004
353
Machining of High Strength PM Steels
Andersson, O. / Throdenberg, H. / Berg, S. / European Powder Metallurgy Association et al. | 2004
355
Niobium Influence on As-Sintered 316L and 434L Stainless Steels and Performance at Low Temperature (300 ^oC)
Abenojar, J. / Delgado, S. / Gonzalez-Centeno, A. / Velasco, F. / European Powder Metallurgy Association et al. | 2004
355
A new simulation methodology for PM surface densification process
Bassan, D. / Asti, M. / Pidria, M. F. / Zingale, P. / European Powder Metallurgy Association et al. | 2004
355
Niobium influence on As-sintered 316L and 434L stainless steels and performance at low temperature (300 deg C)
Abenojar, J. / Delgado, S. / Gonzalez-Centeno, A. / Velasco, F. et al. | 2004
357
Nanosized Mechanocomposites in Immiscible Metal Systems
Grigoryeva, T. / Barinova, A. / Lomaeva, S. / Yelsukov, E. / Lyakhov, N. / European Powder Metallurgy Association et al. | 2004
357
Powder Injection Molding - World Markets and Technologies
Cornwall, R. G. / German, R. M. / European Powder Metallurgy Association et al. | 2004
359
Research of the Wire Electrical Discharge Cutting of Sintered Porous Sheets
Vida-Simiti / Sparchez, Z. / European Powder Metallurgy Association et al. | 2004
361
Effect of Second Phase Dispersoids on Supersolidus Sintered Stainless Steels
Jain, J. / Upadhyaya, A. / European Powder Metallurgy Association et al. | 2004
363
Combined Mechanical Disordering - Reactive Synthesis, Possible Method of Bulk Nanocrystalline Intermetallics Obtaining
Radu, L. O. / European Powder Metallurgy Association et al. | 2004
363
Net Shaping of Powder Components by EPD-11.8 Sintering Technological Sequence
Olevsky, E. A. / Wang, X. / Ma, J. / Maximenko, A. / Stern, M. B. / Guenin, B. M. / European Powder Metallurgy Association et al. | 2004
363
Net shaping of powder components by EPD-sintering technological sequence
Olevsky, E.A. / Wang, X. / Ma, J. / Maximenko, A. / Stern, M.B. / Guenin, B.M. et al. | 2004
363
Fabrication of Heat Transfer Devices by Metal Injection Molding
Johnson, J. L. / Ta, L. K. / European Powder Metallurgy Association et al. | 2004
365
Electrodischarge Machining of Aluminium Matrix Composites
Bialo, D. / Trzaska, M. / Peronczyk, J. / European Powder Metallurgy Association et al. | 2004
367
Microstructural Characterisation of Sintered Ferritic Stainless Steels AISI Microstructural 434L Modified by Mn, Ni and Si Elements
Kazior, J. / Molinari, A. / Kurzydlowski, K. / Pieczonka, T. / Sekula, M. / Nykiel, M. / European Powder Metallurgy Association et al. | 2004
369
Processing and Properties of Nanoscale Cu-based Composites
Karwan-Baczewska, J. / Gotman, I. / Gutmanas, E. Y. / Shapiro, M. / European Powder Metallurgy Association et al. | 2004
369
Feasibility Study on the MIM of Anisotropic NdFeB Magnets
Hartwig, T. / Kramer, L. / Imgrund, P. / Petzoldt, F. / European Powder Metallurgy Association et al. | 2004
369
Exploring the Origins of Anisotropy in Sintering
Bouvard, D. / Zavaliangos, A. / Missiaen, J. M. / European Powder Metallurgy Association et al. | 2004
371
Machining of PM-parts with modern cutting tools
Gonia, D. / Krei, S. / Ogata, Y. / European Powder Metallurgy Association et al. | 2004
375
Mechanical and Structural Properties of in-situ FeAl Composite Fabricated by MA and VHP process
Isonishi, K. / Hashii, M. / Ameyama, K. / Iwasa, H. / European Powder Metallurgy Association et al. | 2004
375
Effect of Cooling Rate on the Structure of Liquid-Phase-Sintered W-27.8Mo-22.5Ni-10.6Fe Alloy
Lin, K.-H. / Hsu, C.-S. / Lin, S.-T. / European Powder Metallurgy Association et al. | 2004
375
In situ, Non-contact monitoring of Powder Compacts during Polymer Removal
Koseski, R. P. / Binet, C. / German, R. M. / European Powder Metallurgy Association et al. | 2004
375
Densification of 316L Stainless Steel + Ni + Cu Powder Compacts
Tosangthum, N. / Coovattanachai, O. / Tongsri / European Powder Metallurgy Association et al. | 2004
377
Surfaces Formability of PM Parts by Lapping
Barylski, A. / European Powder Metallurgy Association et al. | 2004
381
Pressure-dependent viscosity of PIM compounds
Hausnerova, B. / Slezak, R. / Sedlacek, T. / Saha, P. / European Powder Metallurgy Association et al. | 2004
381
High Nitrogen Sintered Stainless Steel Produced by Pressureless Sintering of Nitrogen Containing Powders Mixture
Pieczonka, T. / Stoytchev, M. / Andreev, T. / European Powder Metallurgy Association et al. | 2004
381
Production of Carbon Nanotubes and its Processing to MMCs
Haubner, R. / Edtmaier, C. / Wallnoefer, E. / European Powder Metallurgy Association et al. | 2004
381
Processing Condition and Advantage of Metal Co-Injection Moulding
Okubo, K. / Ishida, M. / Tanaka, S. / Nishiyabu, K. / European Powder Metallurgy Association et al. | 2004
383
Particularities Regarding Electrical Discharge Wire Cutting of High Porosity Sintered Materials
Sparchez, Z. / Vida-Simiti, I. / European Powder Metallurgy Association et al. | 2004
387
Influence of the Coarseness of Carbides on Mechanical Properties of Cold Work Tool Steels
Osen, S. / European Powder Metallurgy Association et al. | 2004
387
Effect of Secondary Carbide Additions on the Phase Stability of Nanocrystalline (Ti, M)(CN)- and (Ti,M1,M2)(CN)-Ni Cermets
Park, S. H. / Kang, Y. J. / Kwon, H. J. / Kang, S. / European Powder Metallurgy Association et al. | 2004
389
The Modified Processes of Ferrite Powder Granulation with Plate Granulators
Andreev, V. / Gonchar, A. / Letyuk, L. / Mayorov, V. / Menshova, S. / European Powder Metallurgy Association et al. | 2004
389
Surface Densification of Various PM Steel Parts
Salak, A. / Selecka, M. / Sladecek, M. / European Powder Metallurgy Association et al. | 2004
389
Effects of Niobium Carbide on the Reinforcement of the Properties of Sintered Stainless Steel
Furukava, M. / Junior, M. D. O. / Gomes, U. U. / Souza, C. P. / Junior, C. A. / Filho, F. A. / European Powder Metallurgy Association et al. | 2004
393
Measurement of density variations in Compacted Parts and Filled Dies using X-ray Computerised Tomography
Burch, S. F. / Tweed, J. H. / Cocks, A. C. F. / Sinka, I. C. / Wu, C. Y. / European Powder Metallurgy Association et al. | 2004
395
Root and Contact Stress Calculations in Surface Densified PM Gears
Flodin, A. / Forden, L. / European Powder Metallurgy Association et al. | 2004
395
Compaction of Titanium Carbonitride powder samples of various C/N ratio by Spark-Plasma-Sintering (SPS) and by conventional hot-pressing
Angerer, P. / Korb, G. / Yu, L. G. / Khor, K. A. / Zalite, I. / European Powder Metallurgy Association et al. | 2004
395
Properties of Vacuum Sintered Duplex Stainless Steels
Grande, M. A. / Ugues, D. / Brytan, Z. / Rosso, M. / Dobrzanski, L. A. / European Powder Metallurgy Association et al. | 2004
397
Influence of the Powder Surface Treatment with Stearic Acid on Powder Injection Moulding of M2 HSS Using a HDPE Based Binder
Herranz, G. / Nagel, R. / Levenfeld, B. / Zauner, R. / Varez, A. / Torralba, J. M. / European Powder Metallurgy Association et al. | 2004
399
Preparation Technique of Gradient Structures Received with Updating of Metals and Alloys Surface with Energy Concentrated Streams (ECS)
Alexander, K. / Lyulko, V. G. / Kudrjakov, O. V. / Lyulko, A. V. / Barkov, A. V. / European Powder Metallurgy Association et al. | 2004
401
Consecutive Sputtering and Laser Processing of Metal Layers as a Possible Means to Enhance the Resolution of Laser Micro Sintering
Wirth, I. / Rota, A. / Pohl, H. / Petzoldt, F. / Regenfuss, P. / Ebert, R. / Hartwig, L. / Exner, H. / European Powder Metallurgy Association et al. | 2004
401
Application Requirements and Material Selection of Surface Densified PM Gears for Automotive Gearboxes
Bengtsson, S. / Caudebec, D. / Wattenberg, F. / Asti, M. / Zingale, P. / Rau, G. / European Powder Metallurgy Association et al. | 2004
403
Synthesis of WC/Co Composite Powder from Waste WC/Co Hard Metal Alloy
Lee, G.-G. / Ha, G.-H. / European Powder Metallurgy Association et al. | 2004
403
Gaseous Nitrocarburizing with Post-Oxidation for MIM-Steels
Sonderegger, M. / Kuntzmann, B. / European Powder Metallurgy Association et al. | 2004
407
Formation and suppression of Ag-rich network during hot pressing a nano-crystallineAg-Ni alloy
Wang, Chonglin / Wu, Weitao / Niu, Yan / Zheng, Qi et al. | 2004
407
Surface Densification Approach to High Density Gears
Hanejko, F. / Rawlings, A. / Slattery, R. / European Powder Metallurgy Association et al. | 2004
407
Adaptive control of process of powder materials sintering and surfacing by electric discharge
Beljavin, K. / Minko, D. / Kuznechik, O. / European Powder Metallurgy Association et al. | 2004
407
Formation and Supression of Ag-rich Network During Hot Pressing a Nano-crystalline Al-Ni Alloy
Wang, C. / Wu, W. / Niu, Y. / Zheng, Q. / European Powder Metallurgy Association et al. | 2004
409
Complex Shaped Hardmetals by PIM
Bose, A. / Walker, D. / Timmons, R. / Graham, M. / European Powder Metallurgy Association et al. | 2004
409
Rapid Tooling for PIM
Zauner, R. / Grienauer, W. / Korb, G. / European Powder Metallurgy Association et al. | 2004
413
Aluminium Based Carbon Nanotube Composites by Mechanical Alloying
Edtmaier, C. / Wallnoefer, E. / Koeck, A. / European Powder Metallurgy Association et al. | 2004
415
X-Ray Microtomography Analysis of the Evolution of 3D Microstructural Characteristics during Sintering of a Copper Powder
Vagnon, A. / Riviere, J. P. / Missiaen, J. M. / Bellet, D. / Di Michiel, M. / Josserond, C. / Bouvard, D. / European Powder Metallurgy Association et al. | 2004
415
Powder Injection Moulding of thin-walled parts
Gornik, C. / European Powder Metallurgy Association et al. | 2004
417
Diamond Deposition on Titanium Stretch Metal for Electrodes
Gerger, I. / Haubner, R. / European Powder Metallurgy Association et al. | 2004
419
The WC-Co~3O~4-C System Behaviour during Heating and Densification under Vacuum
Tolochyn, O. I. / Laptev, A. V. / Ocun, I. Y. / European Powder Metallurgy Association et al. | 2004
419
Development of Nanocrystalline and Dispersion-Strengthened Titanium Materials for Implants
Handtrack, D. / Sauer, C. / Kieback, B. / European Powder Metallurgy Association et al. | 2004
421
Metal Injection Moulding of Agar-Steel Feedstocks
Carreno-Morelli, E. / Crettenand, S. / Brehmer, M. / Dirren, F. / Martinerie, S. / Bonjour, C. / European Powder Metallurgy Association et al. | 2004
423
In-situ Investigation of the Sintering Behavior of Distaloy AE and Astaloy CrM
Gimenez, S. / Roebben, G. / Vleugels, J. / Van der Biest, O. / European Powder Metallurgy Association et al. | 2004
423
Improvement of Corrosion and Wear Resistance of Sintered Steels by Coating
Kabatova, M. / Medyukh, R. / Kostenko, V. / Mihalik, J. / Sevcikova, J. / European Powder Metallurgy Association et al. | 2004
425
Densification Behaviour of Al-Ni-Y Powder Containing Amorphous and Nanocrystalline Phases
Liu, Y. / Guo, S. / Huang, B. / Liu, Z. / Du, Y. / European Powder Metallurgy Association et al. | 2004
427
Properties of WC-35%Ni Composite Prepared from Ultrafine WC-NiO-C Powders
Laptev, A. / Tolochyn, A. / European Powder Metallurgy Association et al. | 2004
427
Rheological Properties of Feedstocks produced from Peg Based Resins
Gokten, M. / Karatas, C. / Unal, H. I. / Saritas, S. / European Powder Metallurgy Association et al. | 2004
429
On the Corrosion Resistance of some PM Ferrous Materials after Steam Treatment
Angelini, E. / Bocchini, G. F. / Piccardo, P. / Pinasco, M. R. / Poggio, E. / Rosalbino, F. / European Powder Metallurgy Association et al. | 2004
429
Poisson's Ratio of Sintered Materials for Structural Machine Parts 1st Report from JPMA Machine Parts Committee
Hirose, N. / Asami, J. / Fujiki, A. / Oouchi, K. / European Powder Metallurgy Association et al. | 2004
431
High Toughness and Heat-resistant RS PM Aluminum Alloy using New Alloy Design Technique
Kaji, T. / Tokuoka, T. / Nishioka, T. / European Powder Metallurgy Association et al. | 2004
433
Effect of Moulding Parameters on Final Sintered Component Dimensions
Heaney, D. F. / Greene, C. G. / European Powder Metallurgy Association et al. | 2004
435
Development Progress: Sintered Tough-Coated Hard Powders (TCHPs)
Toth, R. E. / Smid, I. / Keane, J. / German, R. M. / Ettmayer, P. / European Powder Metallurgy Association et al. | 2004
435
Quality Control on Green Bodies
Traxler, G. / Steiger, C. / European Powder Metallurgy Association et al. | 2004
437
Anti-Corrosion Multi-Layer Oxide Coatings on ss-SIAL on Powders Surface
Lavrenko, V. A. / Yoshimura, M. / Panasyuk, A. D. / Grigoriev, O. N. / Tomila, T. V. / European Powder Metallurgy Association et al. | 2004
437
Ultra fine grained PM aluminium profiles
Martin, B. / Juraj, N. / Frantisek, S. / Karol, I. / European Powder Metallurgy Association et al. | 2004
439
Characterisation of Feedstocks by Injection Moulding
Walcher, H. / Maetzig, M. / European Powder Metallurgy Association et al. | 2004
441
A Critical Overview of Cubic Carbide Phase in Hardmetals
Bhattacharya, P. / Rengarajan, R. / Rao, S. R. / Karthik, P. T. V. K. / European Powder Metallurgy Association et al. | 2004
443
Characterization of Hot Pressed Rapidly Solidified Melt-Spun Multi-Component Al-Ni-Fe-X Flakes
Sastry, K. Y. / Froyen, L. / Vleugels, J. / Van der Biest, O. / Schattevoy, R. / Hummert, K. / European Powder Metallurgy Association et al. | 2004
443
Characterization of hot pressed rapidly solidified melt-spun multi-component AI-Ni-Fe-X flakes
Sastry, K.Y. / Froyen, L. / Vleugels, J. / Biest, O. van der / Schattevoy, R. / Hummert, K. et al. | 2004
443
Properties of Steam-Treated PM Materials Determined by Universal Hardness Testing
Bocchini, G. F. / Baggioli, A. / ivolta, B. / Silva, G. / European Powder Metallurgy Association et al. | 2004
445
Improvement of Ductility for Injection Moulding Ti-6Al-4V Alloy
Itoh, Y. / Harikou, T. / Sato, K. / Miura, H. / European Powder Metallurgy Association et al. | 2004
449
Development of Ultra High Strength Mg-Zn-RE Alloys by Rapid Solidification
Kawamura, Y. / Yoshimoto, S. / Yamasaki, M. / European Powder Metallurgy Association et al. | 2004
449
Hardmetal Coatings Produced by Thermal Spraying - Compositions, Processes, Properties and Applications
Berger, L.-M. / European Powder Metallurgy Association et al. | 2004
451
Effect of TiC addition on the rheological behavior of 316L stainless steel feedstock
Simchi, A. / Khakbiz, M. / Bagheri, R. / European Powder Metallurgy Association et al. | 2004
451
Effect of TiC addition on the rheological behaviour of 316L stainless steel feedstock
Simchi, A. / Khakbiz, M. / Bagheri, R. et al. | 2004
451
High Efficient and Precision Laser Radiation Delivery Method for Selective Laser Cladding
Chivel, Y. / European Powder Metallurgy Association et al. | 2004
451
Defect Detection in PM Materials using Non-Destructive Testing
Morato, J. / Montoliu, R. / Pinar, M. / European Powder Metallurgy Association et al. | 2004
455
Effect of Vacuum Degassing on Surface Characteristics of Rapidly Solidified Aluminum Alloy Powders
Yamasaki, M. / Kawamura, Y. / European Powder Metallurgy Association et al. | 2004
455
Cerium Enrichment Phenomenon on the Sinter Skin of Cemented Carbide
Zhang, L. / Schubert, W.-D. / Huang, B.-y. / Chen, S. / Zhang, C.-f. / European Powder Metallurgy Association et al. | 2004
457
Wear Resistance of a Fe-Ni-Cr PM Coating Modified with Hard Phase Additions
Jones, A. H. / Gould, T. / European Powder Metallurgy Association et al. | 2004

Wie erhalte ich diesen Titel?

Exportieren, teilen und zitieren

Feedback