Application of photon Doppler velocimetry to direct impact Hopkinson pressure bars (Englisch)

in Review of Scientific Instruments ; 87 , 2/Pt 1 ; 023101/1-023101/9
Review of Scientific Instruments
; 2016
  • Neue Suche nach:

Direct impact Hopkinson pressure bar systems offer many potential advantages over split Hopkinson pressure bars, including access to higher strain rates, higher strains for equivalent striker velocity and system length, lower dispersion, and faster achievement of force equilibrium. Currently, these advantages are gained at the expense of all information about the striker impacted specimen face, preventing the experimental determination of force equilibrium, and requiring approximations to be made on the sample deformation history. In this paper, we discuss an experimental method and complementary data analysis for using photon Doppler velocimetry to measure surface velocities of the striker and output bars in a direct impact bar experiment, allowing similar data to be recorded as in a split bar system. We discuss extracting velocity and force measurements, and the precision of measurements. Results obtained using the technique are compared to equivalent split bar tests, showing improved stress measurements for the lowest and highest strains in fully dense metals, and improvement for all strains in slow and non-equilibrating materials.

Wie erhalte ich diesen Titel?


Inhaltsverzeichnis – Band 87, Ausgabe 2/Pt 1

Zeige alle Jahrgänge und Ausgaben

Die Inhaltsverzeichnisse werden automatisch erzeugt und basieren auf den im Index des TIB-Portals verfügbaren Nachweisen der enthaltenen Aufsätze. Die Anzeige der Jahrgänge kann aufgrund fehlender Aufsatznachweise unvollständig oder lückenhaft sein, obwohl die Zeitschrift komplett in der TIB verfügbar ist.

Contributed Review: Recent developments in acoustic energy harvesting for autonomous wireless sensor nodes applications
Khan, Farid Ullah / Khattak, Muhammad Umair | 2016
Application of photon Doppler velocimetry to direct impact Hopkinson pressure bars
Lea, Lewis J. / Jardine, Andrew P. | 2016
A modified time-of-flight method for precise determination of high speed ratios in molecular beams
Salvador Palau, A. / Eder, S.D. / Kaltenbacher, T. / Samelin, B. / Bracco, G. / Holst, B. | 2016
Research on calibration method of relative infrared radiometer
Yang, Sen / Li, Chengwei | 2016
Design verification of large time constant thermal shields for optical reference cavities
Zhang, J. / Wu, W. / Shi, X.H. / Zeng, Y. / Deng, K. / Lu, Z.H. | 2016
Double-arm three-dimensional ion imaging apparatus for the study of ion pair channels in resonance enhanced multiphoton ionization
Poretskiy, M.S. / Chichinin, A.I. / Maul, C. / Gericke, K.H. | 2016
Study of matrix crack-tilted fiber bundle interaction using caustics and finite element method
Hao, Wenfeng / Zhu, Jianguo / Zhu, Qi / Yuan, Yanan | 2016
Direct single-mode fibre-coupled miniature White cell for laser absorption spectroscopy
Kühnreich, Benjamin / Höh, Matthias / Wagner, Steven / Ebert, Volker | 2016
Development of particle characteristics diagnosis system for nanoparticle analysis in vacuum
Kim, Dongbin / Mun, Jihun / Kim, HyeongU / Yun, Ju-Young / Kim, Yong-Ju / Kim, Taewan / Kim, Taesung / Kang, Sang-Woo | 2016
Comparison of velocimetry techniques for turbulent structures in gas-puff imaging data
Sierchio, J.M. / Cziegler, I. / Terry, J.L. / White, A.E. / Zweben, S.J. | 2016
Implementation of a new iterative learning control algorithm on real data
Zamanian, Hamed / Koohi, Ardavan | 2016
Advances in x-ray framing cameras at the National Ignition Facility to improve quantitative precision in x-ray imaging
Benedetti, L.R. / Holder, J.P. / Perkins, M. / Brown, C.G. / Anderson, C.S. / Allen, F.V. / Petre, R.B. / Hargrove, D. / Glenn, S.M. / Simanovskaia, N. et al. | 2016
X-ray topography using the forward transmitted beam under multiple-beam diffraction conditions
Tsusaka, Y. / Takeda, S. / Takano, H. / Yokoyama, K. / Kagoshima, Y. / Matsui, J. | 2016
Evaluation and optimization of quartz resonant-frequency retuned fork force sensors with high Q factors, and the associated electric circuits, for non-contact atomic force microscopy
Ooe, Hiroaki / Fujii, Mikihiro / Tomitori, Masahiko / Arai, Toyoko | 2016
Scanning magnetoresistive microscopy: An advanced characterization tool for magnetic nanosystems
Mitin, D. / Grobis, M. / Albrecht, M. | 2016
Developing of an environmental cell TEM bolder for dynamic in situ observation
Bataineh, Khaled M. | 2016
Optical transparency of paper as a function of moisture content with applications to moisture measurement
Forughi, A.F. / Green, S.I. / Stoeber, B. | 2016
Qualification of a sublimation tool applied to the case of metalorganic chemical vapor deposition of In2O3 from In(tmhd)3 as a solid precursor
Szkutnik, P.D. / Angelides, L. / Todorova, V. / Jimenez, C. | 2016
A load-lock compatible system for in situ electrical resistivity measurements during thin film growth
Colin, J.J. / Diot, Y. / Guerin, P. / Lamongie, B. / Berneau, F. / Michel, A. / Jaouen, C. / Abadias, G. | 2016
Mapping the process dependent conductivity of carbon nanotube thin-films using a non-invasive contact probing system
Choi, Eunsuk / Lee, Seung-Beck | 2016
Photothermal method for absorption measurements in anisotropic crystals
Stubenvoll, M. / Schäfer, B. / Mann, K. / Novak, O. | 2016
Time-resolved local strain tracking microscopy for cell mechanics
Aydin, O. / Aksoy, B. / Akalin, O.B. / Bayraktar, H. / Alaca, B.E. | 2016
Broadband optical mammography instrument for depth-resolved imaging and local dynamic measurements
Krishnamurthy, Nishanth / Kainerstorfer, Jana M. / Sassaroli, Angelo / Anderson, Pamela G. / Fantini, Sergio | 2016
Digital synthetic impedance for application in vibration damping
Necasek, J. / Valclavik, J. / Marton, P. | 2016
High performance electronic device for the measurement of the inverse spin Hall effect
Gomez, Javier E. / Guillen, Matias / Butera, Alejandro / Albaugh, Neil P. | 2016
Temperature measurements during high flux ion beam irradiations
Crespillo, M.L. / Graham, J.T. / Zhang, Y. / Weber, W.J. | 2016
An examination of the elastic properties of tissue-mimicking phantoms using vibro-acoustography and a muscle motor system
Maccabi, A. / Taylor, Z. / Bajwa, N. / Mallen-St. Clair, J. / St. John, M. / Sung, S. / Grundfest, W. / Saddik, G. | 2016
Thermometry of a high temperature high speed micro heater
Xu, M. / Slovin, G. / Paramesh, J. / Schlesinger, T.E. / Bain, J.A. | 2016
An integrated temperature-compensated flexible shear-stress sensor microarray with concentrated leading-wire
Tang, Jian / Liu, Wu / Zhang, Weiping / Sun, Yongming / Chen, Honghai | 2016
A biomimetic tactile sensing system based on polyvinylidene fluoride film
Xin, Yi / Tian, Hongying / Guo, Chao / Li, Xiang / Sun, Hongshuai / Wang, Peiyuan / Qian, Chenghui / Wang, Shuhong / Wang, Cheng | 2016
Hybrid acoustic energy harvesting using combined electromagnetic and piezoelectric conversion
Khan, Farid Ullah / Izhar | 2016
Development of a new direct liquid injection system for nanoparticle deposition by chemical vapor deposition using nanoparticle solutions
Vervaele, Mattias / Roo, Bert De / Deschaume, Olivier / Rajala, Markku / Guillon, Herve / Sousa, Marilyne / Bartic, Carmen / Haesendonck, Chris Van / Seo, Jin Won / Locquet, Jean-Pierre | 2016
A Mo-anode-based in-house source for small-angle X-ray scattering measurements of biological macromolecules
Bruetzel, Linda K. / Fischer, Stefan / Salditt, Annalena / Sedlak, Steffen M. / Nickel, Bert / Lipfert, Jan | 2016
A one-piece 3D printed flexure translation stage for open-source microscopy
Sharkey, James P. / Foo, Darryl C.W. / Kabla, Alexandre / Baumberg, Jeremy J. / Bowman, Richard W. | 2016
An innovative spraying setup to obtain uniform salt(s) mixture deposition to investigate hot corrosion
Mannava, Venkateswararao / Swaminathan, A. Vignesh / Kamaraj, M. / Kottada, Ravi Sankar | 2016
A 500 A device characterizer utilizing a pulsed-linear amplifier
Lacouture, Shelby / Bayne, Stephen | 2016
An online debris sensor system with vibration resistance for lubrication analysis
Ding, Yongbin / Wang, Yanxue / Xiang, Jiawei | 2016
Design of roundness measurement model with multi-systematic error for cylindrical components with large radius
Sun, Chuanzhi / Wang, Lei / Tan, Jiubin / Zhao, Bo / Tang, Yangchao | 2016
A novel technique towards deployment of hydrostatic pressure based level sensor in nuclear fuel reprocessing facility
Praveen, K. / Rajiniganth, M.P. / Arun, A.D. / Sahoo, P. / Satya Murty, S.A.V. | 2016
A noninvasive high frequency oscillation ventilator: Achieved by utilizing a blower and a valve
Yuan, YueYang / Sun, Jianguo / Wang, Baicun / Feng, Pei / Yang, Chongchang | 2016
Multi-mode sliding mode control for precision linear stage based on fixed or floating stator
Fang, Jiwen / Long, Zhili / Wang, Michael Yu / Zhang, Lufan / Dai, Xufei | 2016

Ähnliche Titel