Log in first for optimal use of all functions!

Local Softening Method for Reducing Trimming Load and Improving Tool Wear Resistance in Cutting of a Hot Stamped Component (English)

In: Technology of plasticity   ;  419-422  ;  2011

How to get this title?

Local TIB services
LUH Campus collection
TIB document delivery Purchase
Pricing information

Export, share and cite

© Metadata Copyright the British Library Board and other contributors. All rights reserved.

Table of contents conference proceedings

The tables of contents are generated automatically and are based on the data records of the individual contributions available in the index of the TIB portal. The display of the Tables of Contents may therefore be incomplete.

1
Numerical Modeling in Sheet Forming: Industrial State of the Art
Roll, K. et al. | 2011
1
Innovation and Creativity in Metal Forming
Yang, D.Y. et al. | 2011
9
Feasibility of TiBN PVD Coating for Mill Rolls - Laboratory Testing of Anti-adhesive and Fatigue Resistance Properties
Choumad-Ould, C. / Badiche, X. / Montmitonnet, P. / Gachon, Y. et al. | 2011
15
Study on Solidification during Twin-roll Casting of Magnesium Alloy
Zhang, Y. / Cheng, X. / Wei, D. / Wang, X. / Jiang, Z. et al. | 2011
15
Trends and Visions in Metal Forming Tribology
Bay, N. et al. | 2011
20
Texture and Microstructure Control of Twin-roll Cast AM60 Magnesium Alloy Sheet By High Speed Rolling
Hattori, M. / Sakai, T. / Utsunomiya, H. et al. | 2011
25
Incremental Rolling of Defined Riblet Structures on Ti6Al4V Compressor Blades
Schongen, F. / Klocke, F. / Feldhaus, B. / Timmer, A. / Terhorst, M. / Rohr, O. et al. | 2011
27
Steel and Aluminium in a Low Carbon Future
Allwood, J.M. et al. | 2011
31
The Influence of Skin Passing on Surface Topography, Microstructure and Texture of Subsurface Layer of Steel Sheets
Burdek, M.A. et al. | 2011
37
Examination of Thermal Behavior of Hot Rolled Coil Based on the Finite Element Modeling and Thermal Measurement
Kwon, H.C. / Han, I.S. / Chun, M.S. et al. | 2011
41
Optimum Work Roll Diameter for Cold Rolling
Maeda, Y. / Uesugi, K. et al. | 2011
43
Advances on Finite Element Methods and Particle-based Methods for Metal Forming Processes
Onate, E. et al. | 2011
46
Development of a Four-High Foil Rolling Mill
Hwang, Y.M. / Hwang, T.F. / Lin, C.Y. / Su, C.W. et al. | 2011
49
Servo Forming is more than a Trend
Ernst, M. et al. | 2011
51
Tweleve-high and Twenty-high Rolling Mill for Wide Range of Work Roll Diameter
Uesugi, K. / Maeda, Y. et al. | 2011
51
Twelve-high and twenty-high rolling mill for wide range of work roll diameter
Uesugi, K. / Maeda, Y. et al. | 2011
56
Analysis on Thickness Pulsation in Hot Seamless Tube Rolling
Yoshida, M. / Takahashi, S. et al. | 2011
56
Modelling of Microstructure Response to Deformation Parameters in Selected Metal Forming Processes
Misiolek, W.Z. et al. | 2011
61
Control of End Defect on Rolled Bar
Nalawade, R.S. / Date, P.P. / Mahadik, K.N. / Cheekatla, V.S.K. et al. | 2011
63
New Extrusion of Variable Cross Section Shape and Curved Frame
Hoshino, M. et al. | 2011
67
The Research on Process of Flexible Cross Rolling for Shaft Forgings
Xu, C. / Ren, G. / Yuan, X. / Liu, G. / Jiang, Z. / Ren, W. / Guo, Y. et al. | 2011
69
Effects of Sudden Friction Change on Rolling Characteristics
Sato, T. / Utsunomiya, H. / Sakai, T. et al. | 2011
72
Coupled Thermo-mechanical Behaviours in Symmetric Three-roll Cross Rolling of Disk Rotary Parts
Zhou, X.M. / Hua, L. / Qian, D.S. et al. | 2011
74
Influence of Oxide Scale on Hot Rolling Characteristics of Steel Sheet
Hara, K. / Utsunomiya, H. / Sakai, T. / Yanagi, S. et al. | 2011
74
Influence of oxide scale on hot rolling characteristics of steel sheets
Hara, K. / Utsunomiya, H. / Sakai, T. et al. | 2011
78
Roll Design with Conic Preform Control and Forming Simulation of Skew Rolling
Sheu, J.J. / Lin, S.Y. et al. | 2011
78
Deformation Behaviour and Mechanical Properties of Oxide Scales during Hot Metal Forming Processes
Graf, M. / Kawalla, R. et al. | 2011
82
An Experimental Study on Diamond Burnishing Tool Wear and Its Lifetime Estimation
Iwamoto, T. / Tanaka, H. / Yanagi, K. et al. | 2011
82
FEM simulation of panetary cross rolling process in combination with stretch reducing rolling
Feuerhack, Andreas / Binotsch, Carolin / Katzenberger, Jeannette / Awiszus, Birgit / Potthoff, Heinrich et al. | 2011
82
FEM Simulation of Planetary Cross Rolling Process in Combination with Stretch Reducing Rolling
Feuerhack, A. / Binotsch, C. / Katzenberger, J. / Awiszus, B. / Potthoff, H. et al. | 2011
87
Strategy of Simulation of the Edge-trimming/Cold Rolling Sequence: Numerical Study of Edge Cracking
Hubert, C. / Dubar, L. / Dubar, M. / Dubois, A. et al. | 2011
88
Finite Element Modeling of Form Rolling Process of Spline Shaft Using Flat Dies
Takemasu, T. / Ohsugi, R. et al. | 2011
93
Experimental and Numerical Investigation of Double Roller Casting of Strip with Profiled Cross Section
Daamen, M. / Forster, T. / Hirt, G. et al. | 2011
94
Groove Design for Efficiently Creating Ultrafine-grained Steel Bar by Finite Element Simulation
Inoue, T. et al. | 2011
99
Analysis of Edge Crack Initiation during Cold Rolling of Thin Strip
Xie, H.B. / Jiang, Z.Y. / Yuen, W.Y.D. et al. | 2011
100
Effects of Back-torsion Working on Thread Rolling Workability at Room Temperature of AZ31B Magnesium Alloy
Mizushima, K. / Aida, T. / Takatsuji, N. / Furui, M. / Ohta, M. / Ishizaka, Y. / Yamamoto, M. et al. | 2011
103
Influence of Radial & Axial Feeding on Rolling Process of Large Ring with Square Cross Section
Lan, J. / Qiu, Y.L. / Hua, L. et al. | 2011
105
Simulation for Microstructural Evolution and Deformation Resistance of Nb Microalloyed Steels during Hot Rolling
Kihara, M. / Ohara, K. / Yanagimoto, J. et al. | 2011
109
Numerical Analysis to Decide Tool Movements on Shape Ring Rolling of Large Sized Ring using Taguchi's Design of Experiment
Lee, Y.S. / Lim, J.S. / Lee, M.W. / Moon, Y.H. et al. | 2011
111
Latent and Manifested Flatness Predictions in Thin Strip Cold Rolling: Comparison of Coupled and non-Coupled FEM Approaches
Abdelkhalek, S. / Zahrouni, H. / Montmitonnet, P. / Legrand, N. / Potier-Ferry, M. et al. | 2011
115
Technologies for Advanced Forming of Large-Scale Complex-Structure Titanium Components
Yang, H. / Li, H.W. / Fan, X.G. / Sun, Z.C. / Zhang, D.W. / Guo, L.G. / Li, H. / Zhan, M. et al. | 2011
117
Lightweight Design by Flexible Rolling and Strip Profile Rolling
Julca, D.D. / Forster, T. / Wietbrock, B. / Hirt, G. et al. | 2011
121
Hot Forging of Aluminum-based Metal Matrix Composites
Ho, Y.C. / Huang, S.T. / Chen, F.K. et al. | 2011
123
Use of Bake Hardening Effect after Local Strengthening in Dual Phase Steel
Asadi, M. / Schlosser, N. / Palkowski, H. et al. | 2011
127
Upsetting with Conical Dies for Metal Sputtering Targets
Lin, H.S. / Chang, J.J. / Hsu, Y.C. / Ke, C.C. / Huang, G.J. / Wang, W.S. et al. | 2011
127
Property Distribution in Aluminium Material Processed by Gradation Rolling
Neugebauer, R. / Sterzing, A. / Zachaus, R. / Bergmann, M. et al. | 2011
131
An Enhanced Iterative Algorithm for the Contact Between Elastic Roll Stack and Elasto-Viscoplastic Strip and Plate in Hot Rolling
Kainz, A. / Widder, M. / Parteder, E. / Hein, G. / Schorkhuber, K. / Zeman, K. et al. | 2011
133
Numerical and Experimental Analysis of Closed Die Micro Warm Coining of Stainless Steel
Zhao, K. / Wietbrock, B. / Hirt, G. et al. | 2011
137
Robust Design of No-Twist-Mill Parameters for Reduced Geometric Variation in the Hot Rolling of Steel Rods and Coils
Agarwal, K. / Zhu, Y. / Shivpuri, R. et al. | 2011
139
An Investigation into the Effect of Process Conditions on Friction when Forging IN718 Alloy
Lin, Y.P. / Dean, T.A. / Lin, J. / Reed, R.C. et al. | 2011
143
FEM-modelling of Barrel-type Cross-roll Piercing and Analysis of the Induced Rotational Motion of the Plug Bar
Krux, R. / Zemko, M. et al. | 2011
145
Closed Gap Adjustment Mechanism Development for Die-Forging Mechanical Press
Bocharov, Y. / Antsifirov, A. / Gladkov, Y. et al. | 2011
149
Optimization of Multi-step Die Forging of Clutch Gear
Jin, J.S. / Deng, L. / Ji, D.S. / Xia, J.C. / Wang, X.Y. et al. | 2011
149
Rotary Forming of Annular Grooves onto a Circular Tube
Kawai, K. / Maeda, N. / Yamauchi, T. / Morita, Y. / Koyama, H. et al. | 2011
154
Model Based Optimization of Forging Process Chains by the Use of a Genetic Algorithm
Behrens, B.-A. / Denkena, B. / Charlin, F. / Dannenberg, M. et al. | 2011
155
Role of Surface Texture on Workpiece Angular Deformation in Cross Wedge Rolling
Mangin, P. / Langlois, L. / Bigot, R. et al. | 2011
159
Shape Optimization in 3D Forging Process
Yang, J.B. / Oh, J.Y. / Polisetty, H. / Wu, Z. / Wu, W.T. et al. | 2011
160
Effect of Rolling With Shear Technology on Structure, Properties and Plasticity of Low-carbon steel
Pashinska, E. / Varyukhin, V. / Zavdoveev, A. / Stolyarov, V. et al. | 2011
165
The Forming of Variable Cross-section I-Beams by Hot Rolling
Carruth, M.A. / Allwood, J.M. et al. | 2011
165
Multi-Objective Optimization of Forging Parameters According To Different Meta-models and Advanced Algorithms
Meng, F.J. / Labergere, C. / Lafon, P. et al. | 2011
171
An Investigation on Multi-pass Deformation-based Surface Texturing
Zhou, R. / Cao, J. / Xu, C. / Ehmann, K. et al. | 2011
171
Thermally and Mechanically Coupled Simulation of Metal Forming Processes
Stebunov, S. / Biba, N. / Vlasov, A. / Maximov, A. et al. | 2011
176
Effects of Lubricating Oils on Surface Quality of Aluminum Product by Using Tool with Micro Groove Arrays Formed on Its Surface in Cold Extrusion
Kamitani, S. / Nakanishi, K. / Guo, Y.-M. / Ozaki, M. / Honda, Y. et al. | 2011
177
Deformation and Rolling Force in Universal Rolling of Narrow Flange Width H-beam
Takashima, Y. / Takenouchi, E. et al. | 2011
182
Effect of Process Conditions on Permeation of Lubricant Trapped within Pocket into Real Contact Area
Yanagida, A. / Yoshimoto, T. / Azushima, A. et al. | 2011
182
Influence of Geometric Parameters on Residual Porosity in Process-integrated Powder Coating by Radial Axial Rolling of Rings
Kebriaei, R. / Frischkorn, J. / Reese, S. et al. | 2011
188
A Process Planning Method and Process Stability Analysis in Cold Ring Rolling
Guo, L.G. / Yang, H. et al. | 2011
187
Dimensional Changes of Tooth Profiles after Cold Forging and Heat Treatment of Heli-cal Gear
Lee, Y. / Jung, H. / Kang, S. / Kim, Y. / Park, S. et al. | 2011
193
The use of Simulation to predict Tool Failure in Cold Forging Processes
Arfmann, G.H. / Twickler, M. et al. | 2011
194
Study on the Process Control for a New Type of Vertical Hot Ring Rolling Mill
Wang, X.K. / Hua, L. / Zhu, C.D. et al. | 2011
198
Influence of a Forging Operation on the Deformation of Inclusions
Schuster, A. / Raedt, H.-W. / Tekkaya, A.E. et al. | 2011
199
The Prediction of the Distortion of Blank-Hardened Gear Blanks by Considering the Effect of Prior Manufacturing Operations
Simsir, C. / Eisbrecher, I. / Hunkel, M. / Lubben, T. / Hoffmann, F. et al. | 2011
204
Backward Extrusion Process Design of 304 Stainless Steel Cup-shape Part with Inner Boss Having Square Blind Hole
Lan, J. / Zhang, Y. / Dai, W. / Qiu, Y. / Zhao, Y. / Hua, L. et al. | 2011
205
Experimental and Numerical Analysis of the Distortion of Forged Gear Wheel Blanks
Rentsch, R. / Brinksmeier, E. et al. | 2011
209
Effects of Process Parameters on Cold Rotary Forging of A Spur Bevel Gear
Han, X.H. / Hua, L. / Deng, X.B. et al. | 2011
211
Investigation on isothermal forging process and microstructure evolution of Mg-10Gd-2Y-0.5Zn-0.3Zr alloy
Han, X.Z. / Xu, W.C. / Shan, D.B. et al. | 2011
215
Design and Optimization for Precision Roll-forging Process of A Front Axle of Heavy Truck
Zhou, J. / Liu, X.G. / Liu, H. / Wan, X.Y. et al. | 2011
215
Process Design for Hot Free Forging of Duplex Stainless Steels by Applying Dynamic Materials Model
Na, Y.S. / Yoo, W.D. / Lee, J.H. et al. | 2011
220
Simulating Incremental Bulk Forming Processes with Flexible Kinematics Considering Microstructure Changes, Blowhole Reduction and Automated In-process Control
Bain, G.M. / Barth, C. / Huang, G. / Wohlmuth, M. / Schafstall, H. et al. | 2011
220
Influence of the Rod Diameter on the Upset Ratio in Laser-based Free Form Heading
Stephen, A. / Vollertsen, F. et al. | 2011
224
Solid-Phase Recycling of 7000 Series Al Alloy by Compressive Torsion Processing
Morimoto, R. / Kume, Y. / Kobashi, M. / Kanetake, N. et al. | 2011
224
Research on Orbital Forging Process by Using 3D Finite Element Method
Anjami, N. / Basti, A. et al. | 2011
229
Small Container Fabrication Using Closed Die Wood Forging
Kajikawa, S. / Iizuka, T. / Yamaishi, K. / Hatanaka, N. / Takakura, N. / Kanayama, K. et al. | 2011
230
Experimental and Numerical Research on Shear Extrusion Process
Zhuang, X. / Zhao, Z. / Guo, A. / Xiang, H. / Li, H. / Dong, X. et al. | 2011
235
Equal Channel Angular Pressing with Converging Billets - FE Simulation
Rosochowski, A. / Olejnik, L. et al. | 2011
235
Evaluation of Anti-Galling Property of Surface-Hardening Tools for Hot Aluminium Forging Using Tapered-Plug Penetration Test
Asai, K. / Kitamura, K. / Terano, M. et al. | 2011
235
Evaluation of Anti-Galling Property of Surface-Hardening Tools for Hot Forging of Aluminum Using Tapered-Plug Penetration Test
Asai, K. / Kitamura, K. / Terano, M. et al. | 2011
240
Testing a New Microporous Lubricant Carrier for Cold Forging
Ceron, E. / Bay, N. / Arentoft, M. / Tang, P.T. et al. | 2011
241
Deformation Homogenization of Aluminum Alloys Through Twist Extrusion
Beygelzimer, Y. / Kulagin, R. / Raspornya, D. / Varyukhin, D. et al. | 2011
244
Twist Extrusion - Technique for the Structure Formation
Beygelzimer, Y. / Varyukhin, V. / Kulagin, R. / Prokof eva, O. / Reshetov, A. et al. | 2011
245
Evaluation of Environmentally Friendly Lubricant for Aluminium Alloy Cold Forging
Sagisaka, Y. / Ishibashi, I. / Nakamura, T. / Sasaoka, E. / Hayakawa, K. et al. | 2011
249
Study on Hot Extrusion of Magnesium Alloy Thin Strips
Hwang, Y.M. / Tu, S.M. / Lin, S.H. et al. | 2011
251
Stress Analysis of Ultrasonic-Assisted Upsetting based on Two Dynamic Friction Models
Park, J.H. / Yoo, B.Y. / Kim, Y.H. / Ma, X. et al. | 2011
255
Role of Process Dynamics and Material Instability in the Generation of Surface Defects during High Speed Hot Extrusion of Zirconium Tubes
Agarwal, K. / Zhu, Y. / Shivpuri, R. et al. | 2011
257
Proposal of Punch Wear Prediction Model for Warm Backward Extrusion
Okajima, T. / Oe, S. / Yoshida, H. / Isogawa, S. / Kimura, T. / Ishikawa, T. et al. | 2011
261
A Numerical Analysis of Extrusion of Square section from Round Billet through Mathematically Contoured Die with Design of Die Profile
Maity, K. / Chaubey, S. / Rath, S. et al. | 2011
263
Measurement of Die Deformation in Backward Extrusion Process for Various Tool Dimensions
Murata, Y. / Takahashi, T. et al. | 2011
266
Effect of Pre-forming Condition on Flow Behaviour of 4032 Aluminium Alloy
Deng, L. / Wang, X.Y. / Jin, J.S. / Xia, J.C. / Li, J.J. et al. | 2011
269
Workability of an Aluminium Alloy Processed by Equal Channel Angular Pressing
Sivaraman, A. / Chakkingal, U. et al. | 2011
271
Extreme Plastic Extensibility of Columnar-grained Copper Fabricated by Ohno Continuous Casting Process
Wang, Y. / Huang, H.Y. / Xie, J.X. et al. | 2011
274
Die coatings influence evaluation and friction model selection in aluminium extrusion by means of visioplasticity technique
Donati, L. / Khalifa, N.B. / Tomesani, L. / Tekkaya, A.E. et al. | 2011
274
A New Die Configuration of Tube Drawing with Floating Plugs
Tang, W. / Zhang, S. / Cheng, M. / Song, H. et al. | 2011
277
Process Design of Multi-pass Steel Profile Drawing Process
Lee, S.K. / Kim, S.M. / Lee, S.B. / Ryu, K.H. / Kim, B.M. et al. | 2011
280
Thermo-mechanical Processing of Aluminum Profiles Subsequent to Hot Extrusion
Jager, A. / Khalifa, N.B. / Psyk, V. / Tekkaya, A.E. et al. | 2011
282
Three-dimensional FEM Analysis of Rotational Blade Straightening
Kato, N. / Asakawa, M. / Urabe, M. / Yoshida, M. et al. | 2011
286
Extrusion of Magnesium Sheets with Increased Width
Gall, S. / Muller, S. / Reimers, W. et al. | 2011
287
Development of Design and Optimization System for Metal Forming Process Based on Orthogonal Design, Artificial Neural Network and Genetic Algorithms Methods Integration
Cheng, M. / Wang, R. / Zhang, H. / Zhang, S. et al. | 2011
291
Effect of Deformation Heat Generated During Cold Drawing on Drawn Bar Diameter by Numerical FEM Analysis
Shirakawa, T. / Asakawa, M. / Shirasaki, S. / Ohno, Y. et al. | 2011
293
Bendability of Large Diameter Thin-walled CP-Ti Tube under Rotary-Draw-Bending with Small Bending Radii
Li, H. / Yang, H. / Zhang, Z.Y. / Zhan, M. et al. | 2011
297
Prevention of Wire Breaks in Gold Fine Wire Drawing and Improvement in Wire Straightening
Yoshida, K. / Yamashita, T. / Tanaka, A. et al. | 2011
299
The Dieless Forming of Heat Exchanger
Zhang, Q. / Zhang, Z. / Li, D. / Tang, D. / Peng, Y. et al. | 2011
302
Deformation and Heat Transfer Analysis of Dieless Drawing Process for Metal Tube
Furushima, T. / Ikeda, T. / Noda, Y. / Manabe, K. et al. | 2011
304
An Equivalent Model of the Jaw's Boundary Condition in Numerical Simulation of Stretch Wrap Forming for Extrusions
Li, X.Q. / Li, D.S. / Jin, C.H. et al. | 2011
308
Thermo-mechanical Microforming of Wire by Dieless Drawing Process
Weidig, U. / Barbakadze, N. / Wagner, S. / Steinhoff, K. et al. | 2011
309
Two-stage Reliability Based Design Optimization for Tension Levelling Process
Hamasaki, H. / Gejima, K. / Toropov, V. / Yoshida, F. et al. | 2011
314
A Continuous Hybrid Process for Manufacturing High-strength Low Carbon Steel
Hwang, S.K. / Jin, Y.G. / Baek, H.M. / Kim, D.K. / Son, I.H. / Im, Y.T. et al. | 2011
315
Numerical Analysis of Strip-Roll Conformity in Tension Levelling
Roberts, I. / Wang, C. / Mynors, D. / Adams, P. / Lane, K. / Unwin, P. et al. | 2011
320
Bending of AZ31 Magnesium Alloy Pipe Subjected to Lateral Load
Fukuda, I. / Tanaka, Y. / Yonehara, N. / Miyamoto, N. et al. | 2011
320
Roller Leveler Straightening and Additional Twisting for Coiled Wire
Nishimura, K. / Asakawa, M. / Li, B. et al. | 2011
325
Development of an Innovative Bending Process Employing Synchronous Incremental Heating and Incremental Forming
Park, J.C. / Seong, D.Y. / Yang, D.Y. / Cha, M.H. et al. | 2011
326
Effect of Weld Geometry on Deformational Behaviors of Welded Tubes in NC Bending Process
Ren, N. / Zhan, M. / Yang, H. / Zhang, Z. / Qin, Y. / Jiang, H. / Diao, K. / Chen, X. et al. | 2011
331
High-Speed Calculation Tool for Design of the JCO® Pipe Forming Process
Thome, M. / Vochsen, J. et al. | 2011
331
3D Finite Element Modeling of Elastic-plastic Solid Flexible Medium Deformation in Tube Push Bending Process
Yan, J. / Wu, W. / Zeng, Y.S. et al. | 2011
336
Determination of Contact Normal Stresses in Metal Forming Processes with the Aid of Surface Analysis
Mueller, C. / Groche, P. et al. | 2011
337
Modeling and Active Compensation of the Compliance of a Hot Leveler
Baumgart, M. / Steinbock, A. / Kugi, A. / Douanne, B. / Raffin-Peyloz, G. / Irastorza, L. / Kiefer, T. et al. | 2011
342
Finite Element Analysis of 3D-Profiles with Changing Cross Sections
Hennig, R. / Sedlmaier, A. / Abee, A. et al. | 2011
343
Numerical Simulation of Tension Losses and Reaction Forces in Tension Levellers
Steinwender, L. / Kainz, A. / Krimpelstatter, K. / Zeman, K. et al. | 2011
348
Some Aspects of Laser-Assisted Bending
Bammer, F. / Schumi, T. / Schuocker, D. et al. | 2011
349
Effect of Analysis Conditions on the Accuracy of Springback Simulation in Draw-bending of High Strength Steel Sheet and Experimental Validation
Noma, N. / Kuwabara, T. et al. | 2011
352
Integrated Piezoelectric Actuators in Deep Drawing Tools to Reduce the Try-out
Mainda, P. / Kerschner, M. / Hein, C. / Drossel, W.-G. et al. | 2011
355
Analytical Models to Improve the Three-Roll-Pushbending Process of Tube-Profiles
Engel, B. / Kersten, S. et al. | 2011
356
Ironing of Cylindrical Cups by Using Transversely-Vibrated Rectangular Die
Kaewtatip, P. / Jin, M. / Murakawa, M. et al. | 2011
361
Shear Hydro-bending of Light Alloy Tubes
Yuan, S.J. / Han, C. / Wang, Y. / Yang, S. et al. | 2011
361
Dimple Defect Analysis for Multi-Point Die Forming Process
Zhang, Q. / Zhao, S.D. / Wang, Z.R. et al. | 2011
367
Continuous Metal Forming Process Simulation using the Arbitrary Lagrangian Eulerian Formulation
Boman, R. / Ponthot, J.-P. et al. | 2011
367
On the Influence of Material Parameters in Deep Drawing Processes of Non-axisymmetric Parts
Dohler, S. / Schroder, K.-U. / Schagerl, M. / Waltenberger, T. et al. | 2011
373
Investigation into the Process Design for the Manufacture of Doubly Curved Plates in the Incremental Roll Forming Process and its Experimental Verification
Shim, D.S. / Yang, D.Y. / Lee, D.J. / Han, M.S. / Ko, M.S. et al. | 2011
373
Numerical Simulation and Experimental Validation of Feature-box Drawing Process for AHSS Sheet
Hou, B. / Li, S.H. / Yu, Z.Q. / Zhao, Y.X. / Lin, Z.Q. et al. | 2011
378
Prediction and Optimization of Local Blank Holder Forces for Deep Drawing Processes
Liewald, M. / Blaich, C. et al. | 2011
379
Reduction of Machine Difference of Jolt in Stamping with a Multi-Point Die Support System
Ohashi, T. / Lian, H.-J. / Saito, S. / Namisashi, A. / Sato, T. / Lin, J. et al. | 2011
384
The Homogeneity Analysis and Parameter Optimization of Constrained Groove Pressing Based on Taguchi Method
Wang, Z.S. / Zhang, H.M. / Song, L.B. / Guan, Y.J. / Zhao, G.Q. et al. | 2011
385
Online Monitoring of Deep Drawing Process by Application of Acoustic Emission
Behrens, B.-A. / El-Galy, I. / Huinink, T. / Buse, C. et al. | 2011
390
Visualization of Contact Condition between Workpiece and Die During Stamping
Hagino, N. / Endou, J. / Katoh, S. et al. | 2011
390
Time Efficient Numerical Tool Optimization for Wear Reduction in Deep Drawing
Baecker, V. / Klocke, F. / Timmer, A. / Mattfeld, P. / Schongen, F. / Grzhibovskis, R. / Rjasanow, S. et al. | 2011
396
A New Shell and Solid-shell Formulation Using Complete 3D Constitutive Laws
Bassa, B. / Sabourin, F. / Brunet, M. et al. | 2011
396
Robustness Optimization of Sheet Forming Parameters Based on Kriging Metamodel with an Adaptive Sample Method
Xie, Y.M. et al. | 2011
402
Forming of Pure Titanium Sheets by Multi-stage Deep Drawing Process
Harada, Y. / Tsuda, T. / Fukuda, I. et al. | 2011
402
Experimental Investigation of Hot Press Formed Tailor Welded Blank Sheet
Choi, B.K. / Bok, H.H. / Lee, M.-G. / Barlat, F. / Son, H.S. / Chung, K. et al. | 2011
408
An Analytical Approach for Designing Multi-Stage Cylindrical Cup Deep Drawing
Ahn, D.C. / Chung, Y.J. et al. | 2011
408
Partially Hot-formed Parts from 22MnB5 - Process Window, Material Characteristics and Component Test Results
Feuser, P. / Schweiker, T. / Merklein, M. et al. | 2011
414
Lightweight Car Body Manufactured through Hotstamping and Tailor Welding of Blanks
Kim, D.H. / Moon, M.B. / Kim, Y.J. / Kim, Y.G. / Kim, K.S. et al. | 2011
414
Investigation on Induction Heat Treatment to Enhance the Formability of Aluminum Alloy AA5182
Siefert, K. / Sulzberger, A.M. / Merklein, M. et al. | 2011
419
Local Softening Method for Reducing Trimming Load and Improving Tool Wear Resistance in Cutting of a Hot Stamped Component
Choi, H.S. / Lim, W.S. / Seo, P.K. / Kang, C.G. / Kim, B.M. et al. | 2011
420
Finite Element Simulation and Experiment on Press Die Quenching Process for Development of the Bumper Beam
Hwang, J.S. / An, S.H. / Kang, C.G. / Kim, B.M. et al. | 2011
423
Innovative Concepts for Hot Stamping Process
Masek, B. / Jirkova, H. / Kucerova, L. / Aisman, D. / Eliasova, I. / Zemko, M. et al. | 2011
426
Aspects of Simulation Based Process and Tool Design for Heat Supported Sheet Metal Forming Processes
Neugebauer, R. / Schieck, F. / Meinel, S. / Polster, S. / Scheffler, C. / Lausch, M. et al. | 2011
429
Influence of the Steel Alloy Composition on Phase Transitions and its Applicability to Hot Forming Process
Neugebauer, R. / Goschel, A. / Rautenstrauch, A. / Meza-Garcia, E. et al. | 2011
432
The Effect of Die Structure on Formability in Hot Press Forming of Center Pillar
Kim, J.T. / Kim, B.M. / Kang, C.G. et al. | 2011
435
Adhesion and Formability of Thin Steel/Polymer/Steel Hybrid Sandwich Composites
Sokolova, O. / Carrado, A. / Palkowski, H. et al. | 2011
438
An Experimental and Numerical Investigation of Wrinkling in Deep Drawing of Fiber-metal laminates
Rajabi, A. / Kadkhodayan, M. et al. | 2011
441
Combined Forming of Steel Blanks with Local CFRP Reinforcement
Homberg, W. / Dau, J. / Damerow, U. et al. | 2011
444
Development of Automotive Door Inner Panel using AA5J32 Tailor Rolled Blank
Jeon, S.J. / Kim, B.M. et al. | 2011
447
Building Lightweight Cars by Using Steels with Graded Properties
Heyde, M. / Roll, K. et al. | 2011
449
Warm Hydroforming of an Aluminium Bipolar Plate for Proton Exchange Membrane Fuel Cells
Palumbo, G. / Montemurro, M. et al. | 2011
453
Enhancing Forming Limits by Using a Magnetorheological Fluid as Active Fluid Medium for Hydroforming
Rosel, S. / Merklein, M. et al. | 2011
455
Drawing Of 5A06 Aluminum Alloy Cylindrical Cup with Double Side Pressure
Lin, J.F. / Li, F. / Liu, G. / Xu, Y.C. / Yuan, S.J. et al. | 2011
458
A Study on Sheet Metal Hydroforming of 5052 Aluminum Alloy for Mobile Phone Casing
Li, M.F. / Wu, C.T. / Chiang, T.H. / Chen, T.Y. et al. | 2011
459
Cold Gas-Pressure Folding of Miura-ori Sheets
Schenk, M. / Allwood, J.M. / Guest, S.D. et al. | 2011
462
Sheet Hydroforming of Aluminium Body Panels
Maki, T. et al. | 2011
465
Form-Field-Structure-Pressing Process (FSP) A Method to increase static and dynamic Stability of thin Sheet-Metal-Structures
Behrens, A.W. / Ellert, J. et al. | 2011
467
Investigation Of The Effect Of Blank Shape On The Sheet Hydroforming Parameters
Zamani, S.A. / Hosseinzade, M. et al. | 2011
470
Double-sided High Pressure Hydroforming of Thin-walled Aluminum Alloy Tube
Wang, X.S. / Hu, Z.L. / Xie, L.J. / Yuan, S.J. et al. | 2011
472
Increasing the Limiting Drawing Ratio of AA 5754 Aluminum Sheet by Hydromechanical Deep Drawing Process
Halkaci, M. / Turkoz, M. / Dilmec, M. / Halkaci, S. / Daghan, B. et al. | 2011
475
Influence of Initial Wall Thickness of Tube on Formability in Hot Gas Bulging of Aluminium Alloy Tube Using Pressure of Sealed Air and Resistance Heating
Maeno, T. / Mori, K. / Unou, C. et al. | 2011
477
FE Simulation of a Coupled Injection Molding Sheet Metal Forming Process
Behrens, B.-A. / Bouguecha, A. / Gotze, T. et al. | 2011
481
Preform Design for Tube Hydroforming Based on Wrinkle Formation
Yang, C. / Ngaile, G. et al. | 2011
482
The Formability-Comparision for Al and Steel on Hydroforming Trailing Arm of Rear Suspension
Kim, K.S. / Moon, M.B. / Kim, Y.J. / Kim, Y.G. / Kim, D.H. et al. | 2011
482
The formability-comparison for steel and Al on hydroforming trailing arm of rear suspension
Kim, K.S. / Moon, M.B. / Kim, Y.G. / Kim, D.H. / Kim, Y.J. et al. | 2011
487
Experimental and Numerical Investigation of Failure in Bellows Hydroforming of Stainless Steel Tubes
Khalilian, M. / Arabbeigi, M. / Loh-Mousavi, M. et al. | 2011
487
High Strength Hydroformed Steel Profiles with Free Flanges
Taplick, C. / Schmitt, W. / Rullmann, F. / Ludwig, C. / Groche, P. et al. | 2011
491
Pressure and Feeding Loading Path Optimization in Tube Hydroforming Process Using a Heuristic Method, Simulated Annealing Algorithm
Mirzaali, M. / Liaghat, G.H. / Naeini, H.M. / Seyedkashi, S.M.H. / Shojaee, K. et al. | 2011
493
Reduction of the Friction in Guiding Zone during Tube Hydroforming
He, Z.B. / Li, L. / Fan, X.B. / Lin, Y.L. / Yuan, S.J. et al. | 2011
497
Friction Coefficient Estimation in THF by Means of Numerical Inverse Method
Fiorentino, A. / Marzi, R. / Ceretti, E. / Giardini, C. et al. | 2011
497
Hydroforming of Light Alloy Tubular Parts with Large Expansion Ratio at Nonuniform Temperature Fields
Liu, G. / Zhang, W.D. / He, Z.B. / Yuan, S.J. / Lin, Z. / Qi, J. et al. | 2011
503
Towards a Simplified Approach to Simulate the ISF Process
Yu, Y. / Delameziere, A. / Nouari, M. / Batoz, J.L. et al. | 2011
503
Incremental Sheet Forming with Direction Control of Path Planes
Tanaka, S. / Hayakawa, K. / Nakamura, T. et al. | 2011
507
An Adaptive Tool Path Generation and Optimisation Method for Single Point Incremental Sheet Forming
Lu, B. / Ou, H. / Chen, J. / Cao, J. et al. | 2011
508
Process Window Extension for Incremental Forming through Optimal Work Plane Rotation
Vanhove, H. / Gu, J. / Sol, H. / Duflou, J.R. et al. | 2011
513
Formability in Incremental Sheet Forming and Cyclic Stretch-Bending
Emmens, W.C. / van den Boogaard, A.H. et al. | 2011
513
Influence of Tool Coating on the Process Performance of AISI 304 Incremental Sheet Forming
Ambrogio, G. / Filice, L. / Gautier, G. / Rizzuti, S. et al. | 2011
519
Investigations into the Process Mechanics of the Hybrid Process Combination of Stretch Forming and Incremental Sheet Forming
Araghi, B.T. / Bambach, M. / Hirt, G. / Zettler, J. et al. | 2011
519
3-D Finite Element Simulation of Water Jet Incremental Forming of a Conical Part
Loh-Mousavi, M. / Teymoori, F. / Etesam, A. et al. | 2011
524
Numerical Analysis of the Deformation Mechanism in Incremental Sheet Forming vs. Stretch-Bending
Centeno, G. / Vallellano, C. / Morales, D. / Garcia-Lomas, F.J. et al. | 2011
525
Environmental Costs of Single Point Incremental Forming
Anghinelli, O. / Ambrogio, G. / Di Lorenzo, R. / Ingarao, G. et al. | 2011
530
Single Point Incremental Forming of a Titanium Alloy Car Body Component Superim-posing a Temperature Increase
Palumbo, G. / Montemurro, M. / Fracchiolla, M. / Brandizzi, M. et al. | 2011
531
A Sensitivity Analysis on Environmental Sustainability in Sheet Metal Forming
Ingarao, G. / Gagliardi, F. / Anghinelli, O. / Di Lorenzo, R. et al. | 2011
536
Formability of Titanium Alloys in Incremental Sheet Forming Process with Local Material Heating
Ambrogio, G. / Filice, L. / Gagliardi, F. et al. | 2011
537
Improvement of Formability of Magnesium Alloy Sheets by Friction Stir Incremental Forming
Otsu, M. / Ichikawa, T. / Matsuda, M. / Takashima, K. et al. | 2011
541
Forming Force in SPIF of Variable Wall Angle Components: FEM Modeling and Experimental Results
Bagudanch, I. / Perez-Santiago, R. / Garcia-Romeu, M. / Rodriguez, C. et al. | 2011
542
Tool-path Design for Metal Spinning
Music, O. / Allwood, J.M. et al. | 2011
547
Tool Force Analysis in Multi-pass Conventional Spinning by Finite Element Simulation and Experimental Measurement
Long, H. / Wang, L. / Jagger, P. et al. | 2011
548
Friction-Spinning of Tubular Components - Basic Research on Parameter Influence and Process Design
Homberg, W. / Hornjak, D. et al. | 2011
554
Investigation of Effects of Roller Path Profiles on Wrinkling in Conventional Spinning
Wang, L. / Long, H. et al. | 2011
554
Punching Test of High Strength Steel Sheet in Rapid Cooling Stage Following Austenitizing by Rapid Resistance Heating
Maki, S. / Hattori, T. / Nakanishi, E. et al. | 2011
559
Accuracy of Micro Piercing Process Using Press Indenting and Chemical Etching
Hirota, K. / Cho, H. et al. | 2011
560
Research on Thickness Distribution of Spun Hollow Part with Four Arc-typed Cross-section
Cheng, X.Q. / Wu, X.Y. / Xia, Q.X. et al. | 2011
564
Tool-Endurance of High-Speed Stamping Tools with Plates of Magnesium and Carbon Fibre Laminate
Hirsch, M. / Golle, R. / Hoffmann, H. et al. | 2011
564
Parameter Optimization of Involute Inner Gear Spinning Based on Response Surface Method
Xia, Q.X. / Sun, L.Y. / Xu, T. / Cheng, X.Q. et al. | 2011
568
Experimental Research on Crack Propagation Path during Incremental Forming Cone-Shaped Component
Wang, Y. / Xiao, X. / Yuan, Z. et al. | 2011
570
Analysis of Rotary Cutting Mechanism of Aluminium Sheet
Fukuzawa, Y. / Nagasawa, S. / Satho, T. / Suzuki, S. / Sakayori, H. et al. | 2011
574
Effects of Forming Conditions on Diameter Accuracies of Short Cylindrical Hollow Cup after Forward Flow Forming
Danno, A. / Fong, K.S. / Wong, C.C. et al. | 2011
576
Research on Fine-blanking Forming on the Low Plasticity and Large Thickness Parts
Deng, M. / Zhang, Y.G. / Lv, L. / Wu, Y.Q. et al. | 2011
580
Flow Forming of Thin Wall Pressure Vessels For a Critical Application And Assessment of Residual Stress Present in Them : A Case Study
Rajan, K.M. et al. | 2011
581
Fine Blanking of Helical Gears - Finite Element Simulations and First Experimental Results
Zimmermann, M. / Klocke, F. / Schongen, F. / Feldhaus, B. et al. | 2011
585
Simulation Analysis on Backward Spinning of Extra Thin-walled Shielding Can with High Ratio of Diameter/Thickness
Li, X.H. / He, X.H. / Yang, X.Q. et al. | 2011
586
Notched plate tensile test using image analysis and its application for deformation analysis of shearing
Yoshida, Y. / Yukawa, N. / Ishikawa, T. et al. | 2011
586
Notched Plate Tensile Test Using Image Analysis and Its Application for Deformation
Yoshida, Y. / Yukawa, N. / Ishikawa, T. et al. | 2011
591
Shearing Simulation with Ductile Fracture Propagation Using Three-Dimensional Elastoplastic Static-Explicit Finite Element Method
Takamura, M. / Ozaki, T. / Miyoshi, Y. / Sunaga, H. / Takahashi, S. et al. | 2011
592
Reduction of Shear Droop by Torsion with Static Shear Load of Bars and Wire
Kajino, S. / Tanaka, T. / Asakawa, M. et al. | 2011
596
Influence of the Blank Holding Force on the Punch Deflection in Shearing
Sasada, M. / Aoki, I. et al. | 2011
598
Stretch-flangeability of 1.5GPa Grade TRIP-aided Martensitic Cold Rolled Sheet Steels
Kobayashi, J. / Duc, P.V. / Sugimoto, K. et al. | 2011
601
Effect of Clearance on Cut Surface in Slitting of Metallic Thin Film
Kuboki, T. / Matsudaira, M. / Matsui, T. / Murata, M. et al. | 2011
604
Improvement of Formability for Expansion of Punched Hole of Ultra-High Strength Steel Sheets by Smoothing of Sheared Edge
Mori, K. / Abe, Y. / Ikeda, Y. et al. | 2011
607
Examination about Shearing Characteristic of Highly Precision Batch Push Shearing by Thomson Blade Mold
Oda, Y. / Takatsuji, N. / Aida, T. / Yanase, T. / Dohda, K. et al. | 2011
610
Derivation of Initial Blank Shape for Thick Plate Forming Process and Its Application to Flexible Forming
Heo, S.C. / Seo, Y.H. / Ku, T.W. / Song, W.J. / Kim, J. / Kang, B.S. et al. | 2011
612
Development of a Material Damage Model for the Prediction of Chip Breakage
Klocke, F. / Lung, D. / Essig, C. / Abouridouane, M. et al. | 2011
616
Influence of Pre-stretching on Dent Resistance of Stretch Formed Parts
Papaioanu, A. / Liewald, M. et al. | 2011
618
A Combination of Back Propagation Neural Network and Genetic Algorithm Method for Process Optimization during Fine Blanking Technique
Yin, F. / Mao, H.J. / Hua, L. / Gu, Z.H.Q. et al. | 2011
622
Effect of the Ductility Enhancement on the Forming Limit of the Multilayer Metallic Sheet
Oya, T. / Jeong, C. / Yanagimoto, J. / Koseki, T. et al. | 2011
624
Numerical and Experimental Study of Loading Conditions in the Roller Hemming Process
Zubeil, M. / Roll, K. / Merklein, M. et al. | 2011
628
Effects of Variable Elastic Modulus on Springback Predictions in Stamping Advanced High-Strength Steels (AHSS)
Kim, H. / Kimchi, M. / Kardes, N. / Altan, T. et al. | 2011
629
Experimental Study of the Effects of Hemming Angle Incremental on the Dimensional Variations of Roller Hemming
Hu, X. / Zhao, Y. / Li, S. / Lin, Z. / Huang, S. et al. | 2011
633
Hemming Process Evaluation by Using Computer Aided Measurement System and Numerical Analysis
Swillo, S. / Kocanda, A. / Czyzewski, P. / Kowalczyk, P. et al. | 2011
634
Improvement of Bonding Strength of Bar and Plate in Indentation Plastic Joining with Bar Oscillation Using Servo Press
Matsumoto, R. / Chida, T. / Utsunomiya, H. et al. | 2011
638
Clarifying Mechanism of Stretch Flanging Fracture and Optimum Blank Shape
Kurusawa, Y. / Iwashita, U. / Iwaya, J. / Yamano, T. / Kimura, T. / Hayashi, I. / Asakawa, M. et al. | 2011
639
Joining of a Shaft with a Disk by Shape Memory Polymer or Alloy Taking Easy Disas-sembly into Consideration
Kasuga, Y. / Kmai, T. / Yoshida, K. / Kawamori, S. / Okai, T. et al. | 2011
644
Digitally Flexible Tooling System Using Adjustable Multi-Point Forming Methodology
Pham, D.T. / Su, S.Z. / Li, M.Z. / Liu, C.G. et al. | 2011
645
Mechanical Contact Experiments and Simulations
Nielsen, C. / Martins, P. / Zhang, W. / Bay, N. et al. | 2011
649
Computer Aided Modelling of Tangential Stretch Forming of Titanium Alloy Aeronautical Panels
Del Prete, A. / Primo, T. / Papadia, G. et al. | 2011
651
Fundamental Formability of SPC/A1100 Hybrid Sheet Welded by Butt Laser Welding
Iizuka, T. / Kajikawa, S. / Hatanaka, N. / Takakura, N. et al. | 2011
655
Study of a Flexible Stretch Forming Machine
Li, M.Z. / Han, Q.G. / Fu, W.Z. / Feng, P.X. / Liu, Y.H. et al. | 2011
657
Metallurgical Characterization of Deformed Electron Beam Welded Dissimilar Titanium Alloys
Pasang, T. / Sabol, J.C. / Misiolek, W.Z. / Mitchell, R.M. / Short, A.B. / Littlefair, G. / Thome, A.J. et al. | 2011
659
Design and Analysis of Flexible Blank-drawer for Sheet Metal Forming
Han, Q.G. / Li, Y.T. / Li, M.Z. / Feng, P.X. / Li, Y.F. / Liu, Y.H. et al. | 2011
662
Finite Element Analysis of the Electric Resistance Welding Phenomenon
Okabe, T. / Aratani, M. / Yokoyama, Y. / Toyoda, S. / Kimura, H. / Egi, M. / Kawanishi, A. et al. | 2011
663
Multi-Laminated Composite Parts Designed by Thermo-Mechanical Forming
Barbakadze, N. / Wagner, S. / Weidig, U. / Steinhoff, K. et al. | 2011
667
Improvement of Joinability in Mechanical Clinching of Sheets Using Step Punch
Abe, Y. / Taromaru, K. / Kato, T. / Mori, K. et al. | 2011
669
The Bendability of AA1200/AA2124 Laminate Sheets Produced via FusionTM Technology
Jin, H. / Wagstaff, R.B. / Lloyd, D.J. / Embury, J.D. / Ren, X. / Gallerneault, M. et al. | 2011
669
The bendability of AA1200/AA2124 laminate sheets produced via fusion™ technology
Jin, H. / Wagstaff, R.B. / Lloyd, D.J. / Embury, J.D. / Ren, X. / Gallerneault, M. et al. | 2011
673
Using Flat-Clinching to Obtain Plastic-Metal Compounds
Beyer, U. / Awiszus, B. et al. | 2011
675
Experimental and Numerical Investigation of Stretch-bend Springback of High Strength Steel
Lu, C. / Kang, Y.L. / Zhu, G.M. / Gao, L.F. / Liu, R.D. / Lin, L. et al. | 2011
679
Effects of Direct Current on Formability of Self-Piercing Riveted Joints of Dissimilar Sheet Metals
Lou, M. / Li, Y.B. / Lin, Z.Q. / Chen, G.L. et al. | 2011
680
Forming Conical Parts with Sharp Tip Using Combined Hydroforming and New Re-Drawing Processes
Gorji, A. / Bakhshi-Jooybari, M. / Nourouzi, S. / Hosseinipour, S.J. / Mohammad-Alinejad, G. et al. | 2011
685
Prediction of the mechanical behaviour of TRIP steel
Perdahcioglu, E.S. / Geijselaers, H.J.M. et al. | 2011
686
Pre-strain Effect on Springback of High Strength Steel
Chongthairungruang, B. / Uthaisangsuk, V. / Suranuntchai, S. / Jirathearanat, S. et al. | 2011
691
Flow Behavior of Automotive Aluminum Sheets During In-Plane Uniaxial and Biaxial Compression Loading
Zillmann, B. / Hartel, M. / Halle, T. / Lampke, T. / Wagner, M.F.-X. et al. | 2011
692
Study on Springback in Creep Age Forming of Aluminium sheets
Zhan, L. / Lin, J. / Huang, M. et al. | 2011
696
Modified Plane Torsion Tests for Sheet Metal Characterization
Yin, Q. / Brosius, A. / Tekkaya, A.E. et al. | 2011
698
Springback of Ultra Thin Stainless Steel Sheet after Cold and Warm Forming
Ikeuchi, K. / Wake, Y. / Wake, T. / Ikuta, S. / Shikazono, N. / Yanagimoto, J. et al. | 2011
702
A Study on The Springback Behaviour of Automotive Aluminium Alloys
Bhattacharya, R. / Stanton, M. / Dargue, I. / Aylmore, R. / Williams, G. et al. | 2011
702
Forward and Reverse Simple Shear Test Experiments for Material Modeling in Forming Simulations
Merklein, M. / Biasutti, M. et al. | 2011
708
Flow Characteristics and Intrinsic Workability of Magnesium Alloy AZ61
Liu, J. / Li, J. / Wang, C. / Ruan, L. / Cui, Z. et al. | 2011
708
Using Measuring Devices to Compensate Springback in Trail Stamping Step
Zhou, C. / Liao, J. / Zhou, X.H. / Xia, Q.X. et al. | 2011
713
Investigation of Production Technologies for Sub-microcrystalline Materials with a Special Emphasis on Accumulative Roll Bonding (ARB)
Hagemann, P. / Schmidtchen, M. / Rafaja, D. / Kawalla, R. et al. | 2011
714
Flow Curve Evaluation by Optic Strain Measurements and Force Balance at the Most Critical Section in the Neck Region of a Tensile Specimen
Coruk, E. / Karadogan, C. et al. | 2011
719
Comparison of Mg/Al Clad Sheet with and without Pure Titanium Foil Inserts by Rollbonding
Saito, M. / Asakawa, M. / Kobayashi, M. / Katoh, M. / Masahito, K. et al. | 2011
720
Modified Hydraulic Bulging for Determination of Flow Stress Curve
Keran, Z. / Math, M. / Piljek, P. et al. | 2011
724
Investigation on the Roll-Bonding of Aluminium Coatings to Magnesium Substrates
Rudolph, K.-M. / Palkowski, H. et al. | 2011

How to get this title?

Local TIB services
LUH Campus collection
TIB document delivery Purchase
Pricing information

Export, share and cite

Feedback