There is an Open Access version for this licensed article that can be read free of charge and without license restrictions. The content of the Open Access version may differ from that of the licensed version.
Pricing information
Please choose your delivery country and your customer group
Ni-Al2O3 cermet supported tubular SOFC (solid oxide fuel cell) has been fabricated by thermal spraying processes to aim at reducing fabrication cost. Ni-Al2O3 cermet support was deposited by flame spraying and the anode, electrolyte and cathode were deposited by plasma spraying on the support tube. YSZ-Ni was used as the anode and lanthanum strontium manganate was used as the cathode. Plasma-sprayed ScSZ and YSZ deposits, after postspray densification treatment by nitrate solution, were used as the electrolyte at thicknesses of 40 micron to 100 micron to assemble SOFC single test cell. It was found that the output power density was increased with the decrease of electrolyte thickness. The cells assembled with ScSZ exhibited a higher powder density than YSZ electrolyte. The maximum output powder density reached 0.89 W/cm2 with ScSZ electrolyte of 40 micron thick at 1000 deg C in comparison of 0.76 W/cm2 obtained with YSZ electrolyte. The results showed that the tubular SOFC fabricated fully by thermal spray processes exhibits excellent performance.
