Log in first for optimal use of all functions!

    Influence of substrate surface temperature on the microstructure and properties of plasma-sprayed Al2O3 coatings (English)

    In: Thermal Spray: Global Solutions for Future Application, ITSC, International Thermal Spray Conference, 2010 ; 1-7  ; 2010

    How to get this title?

    TIB document delivery Purchase
    Pricing information

    Export, share and cite

    Thermally sprayed ceramic coatings have a layered structure with a limited interface bonding. Substrate surface temperature prior to droplets impact during deposition significantly influences the microstructure and properties of the coatings. Through the controlling of substrate surface temperature, the lamellar interface bonding of the deposits could be possibly improved. Al2O3 coatings were deposited by atmospheric plasma spraying at the surface temperatures of 100 deg C, 275 deg C, 375 deg C, 480 deg C, 530 deg C and 660 deg C. The fractured cross-section morphology was characterised by scanning electron microscopy. X-ray diffraction was used to analyse the phase contents. Microhardness, Young's modulus and thermal conductivity of the deposits were measured. It was observed that the interface area with columnar grain growth across splat-splat interfaces was increased with increasing deposition temperature. Consequently, micro-hardness, Young's modulus and thermal conductivity were increased with the increase of deposition temperature. The improvement of properties suggests that the lamellar interface bonding in the deposits was improved as the substrate surface temperature is increased.

    Table of contents conference proceedings

    The tables of contents are generated automatically and are based on the data records of the individual contributions available in the index of the TIB portal. The display of the Tables of Contents may therefore be incomplete.

    1
    HVOF spraying of ultrahigh boron-high carbon tool steel coating for wear resistance applications
    Rajasekaran, B. / Mauer, G. / Vaßen, R. / Röttger, A. / Weber, S. / Theisen, W. et al. | 2010
    1
    Plasma sprayed NiCr coatings using a gas shroud system
    Morks, M.F. / Berndt, C.C. et al. | 2010
    1
    Effect of M-CrAlY coating for corrosion resistance in specific high temperature atmosphere
    Niwa, A. / Hamashima, K. et al. | 2010
    1
    Potential of cold gas spraying in power electronic applications
    Donner, K.R. / Gaertner, F. / Klassen, T. et al. | 2010
    1
    Degradation mechanisms of thermally sprayed coatings in chloride containing electrolytes
    Laurila, J. / Niemi, K. / Vuoristo, P. et al. | 2010
    1
    The Oxy-Fuel Ionization (OFI) Process - experimental process analysis
    Parco, M. / Barykin, G. / Fagoaga, I. / Mariaux, G. / Goutier, S. / Vardelle, M. et al. | 2010
    1
    Plasma sprayed electrolyte of magnesium doped lanthanum silicate with apatite-type structure
    Sun, F. / Liao, H. / Zhang, N. / Rapaud, O. / Coddet, C. et al. | 2010
    1
    Preparation process and property research of Fe-Cr-Al intermetallic compound coating
    Wang, C. / Sun, H. / Liu, X. / Qu, Z. / Bi, J. et al. | 2010
    1
    The next step in intelligent gun technology: EvoLink for plasma spraying
    Koller, M. / Kilchenmann, A. et al. | 2010
    1
    Relationships between process parameters, microstructure and adhesion strength of HVOF sprayed IN718 coatings
    Lyphout, C. / Nylen, P. / Ostergren, L. et al. | 2010
    1
    Improved hardfacing for drill bits and drilling tools
    Sue, J.A. / Sreshta, H. / Qiu, B.H. et al. | 2010
    1
    The performance of different WC-based cermet coatings in oil and gas applications - a comparison
    Meng, H. / Neville, A. / Gourdji, P. / Hu, X. et al. | 2010
    1
    Characterization of high-temperature abrasive wear of cold-sprayed FeAl intermetallic compound coating
    Wang, H.T. / Li, C.J. / Yang, G.J. / Zhao, S.N. / Bao, C.G. et al. | 2010
    1
    Improving powder injection in plasma spraying by optical diagnostics of the plasma and particle characterization
    Mauer, G. / Vaßen, R. / Stöver, D. / Kirner, S. / Marques, J.L. / Zimmermann, S. / Forster, G. / Schein, J. et al. | 2010
    1
    Experimental investigation of fretting wear on nitrided and thermal spray coated Ti-6-4 parts for liftfan applications
    Patil, P. / Sadeghi, F. / Dixit Satish, S. / Chin, M. et al. | 2010
    1
    Corrosion behavior of NiCrBSi alloy coatings manufactured via in situ plasma spray - laser re-melting process
    Serres, N. / Hlawka, F. / Costil, S. / Langlade, C. / Machi, F. et al. | 2010
    1
    Cold spraying for titanium dioxide coatings with high photocatalytic bactericidal activity
    Kliemann, J.O. / Gutzmann, H. / Gärtner, F. / Klassen, T. / Gabriel, H. et al. | 2010
    1
    Duration and reliability of axial suspension plasma spray process
    Tang, Z. / Hartell, P. / Masindo, G. / Bogdanovic, N. / Yaroslavski, I. / Kim, H. / Restrepo, J. / Ellsworth, D. / Burgess, A. et al. | 2010
    1
    The PROTAL process applied on Cold Spraying to improve interface adherence and coating cohesion - case of titanium and nickel based alloys
    Costil, S. / Irissou, E. / Danlos, Y. / Legoux, J.G. / Wong, W. / Yue, S. / Moreau, C. / Coddet, C. et al. | 2010
    1
    Surface pretreatments including laser texturing for thermal spraying
    Lamraoui, A. / Langlade, C. / Costil, S. / Coddet, C. et al. | 2010
    1
    High temperature mechanical behaviour of UHTC coatings for thermal protection of re-entry vehicles
    Pulci, G. / Tului, M. / Tirillo, J. / Marra, F. / Lionetti, S. / Valente, T. et al. | 2010
    1
    Cold spraying of Zn and Zn-alloy coatings for print
    Onizawa, K. / Jansen, J. / Schulze, M. / Gärtner, F. / Klassen, T. et al. | 2010
    1
    Influence of pores and cracks morphology on mechanical behavior of thermally sprayed ceramics
    Musalek, R. / Matejicek, J. / Pejchal, V. / Mari, E. / Valarezo, A. / Sampath, S. et al. | 2010
    1
    Effect of the nitrogen flow rate on the microstructure and transformation rate of TiN coatings in reactive plasma spraying
    Yang, H. / Chen, H. et al. | 2010
    1
    Effects of radial liquid injection on atmospheric plasma characteristics
    Soysal, D. / Kavka, T. / Ansar, A. et al. | 2010
    1
    Preparation of nanocomposite GDC/LSCF cathode material for IT-SOFC by RF induction plasma spraying
    Shen, Y. / Gitzhofer, F. / Almeida, V. et al. | 2010
    1
    Microstructures and adhesive bonding strength analysis of plasma sprayed silica modified hydroxyapatite coatings on Ti-6Al-4V substrates
    Xu, J.L. / Khor, K.A. / Cizek, J. et al. | 2010
    1
    Comparison of two structure scales of plasma sprayed Al2O3-TiO2 coatings on mechanical and tribological properties
    Vargas, F. / Ageorges, H. / Xin, W. / Fauchais, P. / Lopez, M. et al. | 2010
    1
    Phase composition and microstructural responses of crystalline mullite/YSZ coating under water vapor environments
    Garcia, E. / Mesquita-Guimaraes, J. / Miranzo, P. / Osendi, M.I. / Cojocaru, C.V. / Wang, Y. / Moreau, C. / Lima, R.S. et al. | 2010
    1
    Observation of microstructures in thermal sprayed coatings and single deposited splats using ion beam milling
    Kim, K.H. / Watanabe, M. / Kuroda, S. / Kawano, N. et al. | 2010
    1
    Investigation of atmospheric plasma sprayed tungsten carbide cobalt coatings using statistical design of experiments
    Tillmann, W. / Vogli, E. / Kebs, B. et al. | 2010
    1
    Transmission electron microscopy of cold sprayed titanium
    King, P.C. et al. | 2010
    1
    Wire arc sprayed iron-based anti-corrosion coatings for waste incineration plants
    Wilden, J. / Drescher, V. / Djahanbakhsh, M. / Durham, R. / Schütze, M. et al. | 2010
    1
    Design of experiment analysis of the Sulzer Metco DJ high velocity oxy-fuel coating of hydroxyapatite for orthopaedic applications
    Hasan, S. / Stokes, J. et al. | 2010
    1
    Mechanical behaviour of air-plasma sprayed functionally graded YSZ-mullite environmental barrier coatings: A study via instrumented indentation
    Cojocaru, C.V. / Wang, Y. / Lima, R.S. / Moreau, C. / Mesquita-Guimaraes, J. / Garcia, E. / Miranzo, P. / Osendi, M.I. et al. | 2010
    1
    Homogenization of coating properties in atmospheric plasma spraying - current results of a DFG (German Research Foundation)-funded research group
    Bobzin, K. / Bagcivan, N. / Petkovic, I. / Schein, J. / Landes, K. / Forster, G. / Hartz-Behrend, K. / Kirner, S. / Marques, J.L. / Zimmermann, S. et al. | 2010
    1
    The improvements of thermal spray toolkit, extended software for robotic off-line programming
    Fang, D. / Deng, S. / Liao, H. / Coddet, C. et al. | 2010
    1
    Measurements of particles parameters at detonation spraying
    Smurov, I. / Pervushin, D. / Chivel, Y. / Laget, B. / Ulianitsky, V. / Zlobin, S. et al. | 2010
    1
    Correlation of wear resistant functions of HVOF and warm sprayed WC-Co coatings with in-flight particle characteristics
    Sato, K. / Kitamura, J. / Raman, G. / Watanabe, M. / Komatsu, M. / Kuroda, S. et al. | 2010
    1
    Adhesion of YSZ nano-structured coating on Haynes 230 substrate
    Vert, R. / Meillot, E. / Vardelle, A. / Mariaux, G. / Dublanche-Tixier, C. / Chicot, D. et al. | 2010
    1
    Cyclic oxidation behavior of HVOF-sprayed Ni-20Cr coating on ASTM-SA213-T22 boiler steel at 900 deg C
    Kaushal, G. / Prakash, S. / Sing, H. et al. | 2010
    1
    Effect of heat treatment on porosity and corrosion performance of cold sprayed titanium deposits
    Hussain, T. / McCartney, D.G. / Shipway, P.H. / Marrocco, T. et al. | 2010
    1
    Effect of ambient pressure and substrate temperature on heat transfer at interface between molten droplet and substrate surface
    Fukumoto, M. / Tanaka, K. / Yang, K. / Usami, T. / Yasui, T. / Yamada, M. et al. | 2010
    1
    Colferoloy - An iron-based alternative for wear resistance applications
    Stratford, G.C. / Battenbough, A.J. / Allnatt, P.J. / Burkard, H. et al. | 2010
    1
    The structure and properties of plasma sprayed Fe doped manganese cobalt oxide spinel coatings for SOFC metallic interconnectors
    Puranen, J. / Lagerbom, J. / Hyvärinen, L. / Kylmälahti, M. / Vuoristo, P. et al. | 2010
    1
    A preliminary study of the oxidation behavior of TBC with cold spray CoNiCrAlY bond coat
    Chen, W.R. / Irissou, E. / Legoux, J.G. / Wu, X. / Marple, B.R. et al. | 2010
    1
    The advancement and positioning of laser cladding in the surface engineering industry
    Marchione, Thierry / Dezert, Didier / Choong, Alex et al. | 2010
    1
    Correlations between the oscillation modes of arc voltage and pressure in cathode cavity of DC plasma torches
    Rat, V. / Coudert, J.F. et al. | 2010
    1
    Wear properties of Ni-based composite coatings sprayed by HVAF
    Wu, C. / Zhou, K. / Liu, M. / Deng, C.G. / Deng, C.M. et al. | 2010
    1
    Characterization of some electric arc sprayed cored-wire and nano cored-wire cermet coatings
    Tuiprae, M. / Wirojanupatump, S. / Jiansirisomboon, S. et al. | 2010
    1
    Thermal spray forming of high-efficiency, metal-foam heat exchanger tubes
    Tsolas, N. / Chandra, S. / Salimjazi, H. / Pershin, V.I. / Mostaghimi, J. et al. | 2010
    1
    Relations between in flight particle characteristics and coating properties by HVOF-spraying
    Tillmann, W. / Vogli, E. / Hussong, B. / Kuhnt, S. / Rudak, N. et al. | 2010
    1
    Velocity diagnostics for gas velocity distributions in cold gas and plasma spraying using non-resonant laser scattering
    Lange, S. / Sieber, M. / Forster, G. / Marques, J.L. / Schein, J. et al. | 2010
    1
    Columnar structured thermal barrier coatings (TBCs) by thin film low pressure plasma spraying (LPPS-TFTM)
    Hospach, A. / Mauer, G. / Vaßen, R. / Stöver, D. et al. | 2010
    1
    PIV measurements of metallic powders produced by liquid metal atomization using De Laval nozzle
    Khatim, O. / Planche, M.P. / Dembinsky, L. / Coddet, C. / Bailly, Y. / Guermeur, F. / Girardot, L. et al. | 2010
    1
    APS-Al2O3 coatings versus arc-sprayed and plasma-anodised Al layers
    Lampke, T. / Meyer, D. / Pokhmurska, H. / Wielage, B. et al. | 2010
    1
    Effect of powder preheating temperature on the properties of Cu-based amorphous coating layer by cold spray deposition
    Cho, J. / Park, D. / Kim, J. / Lee, J. / Lee, K. et al. | 2010
    1
    The influence of particle temperature, particle velocity and coating surface temperature on the sliding wear performance of TiO2-Cr2O3 coatings
    Trache, R. / Berger, L.M. / Saaro, S. / Lima, R.S. / Marple, B.R. et al. | 2010
    1
    Microstructure and enhanced mechanical properties of WC-Co coatings obtained by warm spraying
    Kuroda, S. / Raman, G. / Watanabe, M. / Komatsu, M. / Sato, K. / Kitamura, J. et al. | 2010
    1
    Characterisation of corrosion resistant deposits by cold gas dynamic spray
    Marrocco, T. / Harvey, D. / Hussain, T. et al. | 2010
    1
    Development of a low-temperature, oxy-fuel (LTOF) thermal spray gun
    Dhiman, R. / Farhadi, F. / Pershin, L. / Chandra, S. / Mostaghimi, J. et al. | 2010
    1
    Plasma sprayed and electrospark deposited zirconium metal diffusion barrier coatings
    Hollis, K.J. / Pena, M.I. et al. | 2010
    1
    Expansion of the applicable range of HVOF process conditions
    Wank, A. / Schwenk, A. / Liu, M. / Zhou, K.S. / Deng, C.M. / Deng, C.G. et al. | 2010
    1
    Extension of erosion life of turbine housing for ship by thermal spray
    Sonoya, K. / Nakamura, M. / Ishida, K. et al. | 2010
    1
    Yttria deposition by a novel plasma torch
    Pershin, L. / Mostaghimi, J. et al. | 2010
    1
    Mechanical properties and behaviour of BSAS/mullite-based environmental barrier coatings exposed to high temperature in water vapour environment
    Cojocaru, C.V. / Kruger, S.E. / Lima, R.S. / Moreau, C. et al. | 2010
    1
    Arc spraying of WC-FeCSiMn cored wires - Part 2: Young's modulus measurement and simulation
    Nebel, J. / Klusemann, B. / Vogli, E. / Tillmann, W. / Svendsen, B. et al. | 2010
    1
    Microstructure and electrochemical behavior of Sm(0.5)Sr(0.5)CoO3 deposited by solution precursor plasma spraying
    Wang, X.M. / Li, C.X. / Li, C.J. / Tian, L.H. / Song, B. / Yang, G.J. et al. | 2010
    1
    Characteristics of Cu film-like deposited by using VLPPS
    Zhang, N. / Sun, F. / Zhu, L. / Verdy, C. / Planche, M.P. / Liao, H. / Coddet, C. et al. | 2010
    1
    TBC dry ice stripping
    Giolli, C. / Allegrini, B. / Duda, T. / Engl, L. / Giorgetti, A. / Groppetti, A. / Lanzi, A. / Pini, S. / Spagnoli, M. / Scrivani, A. et al. | 2010
    1
    Influence of the surface state on the adherence of the coating: case of an alumina coating plasma sprayed on SiC composites
    Costil, S. / Lukat, S. / Verdy, C. / Coddet, C. et al. | 2010
    1
    Predicting the thermal conductivity of AlSi/polyester abradable coatings: effects of the numerical method
    Bolot, R. / Seichepine, J.L. / Qiao, J.H. / Coddet, C. et al. | 2010
    1
    Coating of aluminium components with iron-based nanocrystalline solidifying materials to improve wear resistance
    Wilden, J. / Drescher, V.E. / Lehmann, O. et al. | 2010
    1
    Thermophysical studies on thermally sprayed tungsten carbide-cobalt coatings
    Thiele, S. / Sempf, K. / Jaenicke-Roessler, K. / Berger, L.M. / Spatzier, J. et al. | 2010
    1
    Vapor phase deposition using a plasma spray process
    Niessen, K. von / Gindrat, M. et al. | 2010
    1
    Crystal and micro structures of plasma sprayed yttrium oxide coatings by axial injection of fine powder slurries
    Kitamura, J. / Mizuno, H. / Sato, K. / Tang, Z. / Burgess, A. et al. | 2010
    1
    Cavitation erosion properties and fracture morphology of thermal spray coatings
    Kanno, A. / Takabatake, T. / Namba, Y. / Tani, K. / Uematsu, S. / Sugasawa, S. / Yoshioka, M. / Ishihara, Y. et al. | 2010
    1
    Plasma sprayed LSCF oxygen electrode for SOFC
    Ansar, A. / Soysal, D. / Ilhan, Z. / Wagner, N. et al. | 2010
    1
    Measurement of particle emissions generated by arc spray and flame spray processes
    Billieres, D. / Bemer, D. / Subra, I. / Lecler, M. / Regnier, R. / Morele, Y. / Gutha, J. et al. | 2010
    1
    Layer formation of cold-sprayed ceramic titanium dioxide layers on metal surfaces
    Kliemann, J.O. / Gutzmann, H. / Gärtner, F. / Klassen, T. / Jursic, I. / Borchers, C. et al. | 2010
    1
    Evaluation of the photocatalytic activity of TiO2-coatings prepared by different thermal spray techniques
    Gutzmann, H. / Kliemann, J.O. / Albrecht, R. / Gärtner, F. / Klassen, T. / Toma, F.L. / Berger, L.M. / Leupolt, B. et al. | 2010
    1
    Metastable austenite type core wire for arc spraying - modeling of heat transfer in end face and coating structure analysis
    Korobov, Y. / Filippov, M. / Belozertsev, A. / Neveszin, S. / Shymiakov, V. et al. | 2010
    1
    Ti-parts for aviation industry produced by cold spraying
    Binder, K. / Gärtner, F. / Klassen, T. et al. | 2010
    1
    Functionally graded coatings produced by means of twin wire arc spraying
    Tillmann, W. / Vogli, E. / Abdulgader, M. et al. | 2010
    1
    Analysis of Fe-base materials and evaluation of their suitability for wear protection coatings
    Pelz, A. et al. | 2010
    1
    Characterization and performance evaluation of a helium recovery system designed for cold spraying
    Legoux, J.G. / Irissou, E. / Desaulniers, S. / Bobyn, J. / Harvey, B. / Wong, W. / Gagnon, E. / Yue, S. et al. | 2010
    1
    Effect of the ceramic component on cold sprayed metal ceramic coatings
    Sova, A. / Kosarev, V. / Papyrin, A. / Smurov, I. et al. | 2010
    1
    Effect of surface morphology of MCrAlY bond coats on the isothermal oxidation behavior
    Li, Y. / Li, C.J. / Zhang, Q. / Xing, L.K. / Yang, G.J. et al. | 2010
    1
    Microstructure and NO2 sensing performance of APS ZnO coatings
    Zhang, C. / Debliquy, M. / Liao, H. et al. | 2010
    1
    Comparison of Al2O3 and Al2O3-TiO2 coatings manufactured by aqueous and alcoholic suspension plasma spraying
    Darut, G. / Valette, S. / Montavon, G. / Ageorges, H. / Denoirjean, A. / Fauchais, P. / Klyatskina, E. / Segova, F. / Salvador, M.D. et al. | 2010
    1
    Thermally sprayed fine Fe-based materials for wear protection applications in the printing industry
    Bobzin, K. / Schlaefer, T. / Warda, T. / Schaefer, M. et al. | 2010
    1
    Effect of using liquid feedstock in a high pressure cold spray nozzle
    Farvardin, E. / Stier, O. / Luthen, V. / Dolatabadi, A. et al. | 2010
    1
    A comparative study of the splat morphology and the splat-substrate interaction for NiCr sprayed on to stainless steel by both plasma and HVOF spraying
    Brossard, S. / Munroe, P.R. et al. | 2010
    1
    Oxide ion conductivity in dense apatite-type lanthanum silicate
    Gao, W. / Liao, H.L. / Coddet, C. et al. | 2010
    1
    Research of plasma spraying process of nanostructured zirconia thermal barrier coating
    Sun, H. / Wang, C. / Liu, X. / Qu, Z. / Bi, J. et al. | 2010
    1
    Next generation thermal barrier coatings for the gas turbine industry
    Curry, N. / Markocsan, N. / Li, X.H. / Tricoire, A. / Dorfman, M. et al. | 2010
    1
    Consolidation of Al2O3/Al nanocomposite powder by cold spray
    Poirier, D. / Legoux, J.G. / Drew, R.A.L. / Gauvin, R. et al. | 2010
    1
    Tungsten-based coatings to increase the lifetime of permanent-mold casting molds
    Wilden, J. / Drescher, V.E. et al. | 2010
    1
    Study of the influence of pre-heated Al6061 substrate temperature on Al coatings deposited by cold spray
    Rech, S. / Trentin, A. / Vezu, S. / Legoux, J.G. / Irissou, E. / Guagliano, M. et al. | 2010
    1
    Comparative study of the electrical properties and microstructures of thermally sprayed alumina- and spinel-coatings
    Toma, F.L. / Scheitz, S. / Berger, L.M. / Sauchuk, V. / Kusnezoff, M. et al. | 2010
    1
    Addition of hBN to NiAl coatings deposited using APS and HVOF thermal spraying
    Hsiao, W.T. / Su, C.Y. / Huang, T.S. / Liao, W.H. / Leu, M.S. et al. | 2010
    1
    Comparison of structure and wear properties of Babbitt layers which are produced by Arc Spraying and Pouring
    Korobov, Y. / Potechin, B. / Gogolev, L. / Ilushin, V. / Deviatiarov, M. et al. | 2010
    1
    Plasma spraying of Lanthanum Silicate electrolytes for Intermediate Temperature Solid Oxide Fuel Cells (ITSOFCs)
    Dru, S. / Meillot, E. / Wittmann-Teneze, K. / Saboungi, M.L. / Benoit, R. et al. | 2010
    1
    Influence of helium and nitrogen gases on the properties of cold gas dynamic sprayed pure titanium coatings
    Wong, W. / Irissou, E. / Legoux, J.G. / Yue, S. et al. | 2010
    1
    Microstructures of metallic NiCrBSi coatings manufactured via hybrid plasma spray process
    Serres, N. / Hlawka, F. / Costil, S. / Langlade, C. / Machi, F. et al. | 2010
    1
    Portable high pressure cold spray process - equipment, coatings and applications
    Karthikeyan, J. / Kay, C.M. / Hoell, H. et al. | 2010
    1
    Composite coatings with drag reduction and self-cleaning properties
    Wilden, J. / Drescher, V.E. / Schaaf, P. / Günschmann, S. et al. | 2010
    1
    Structure and tribological characteristics of HVOF coatings sprayed from powder blends of Cr3C2-25NiCr and NiCrBSi alloy
    Määttä, A. / Kanerva, U. / Vuoristo, P. et al. | 2010
    1
    Effect of stand-off distance on EMAA splats deposited onto glass and mild steel substrates
    Xie, W. / Saber-Samandari, S. / Wang, J. / Berndt, C.C. et al. | 2010
    1
    Evaluation of boron carbide based thermal sprayed coatings for tribological applications
    Lima, C.R.C. / Rosales, M.J. / Camargo, F. et al. | 2010
    1
    Comparison of cold spray and detonation coatings properties
    Smurov, I. / Pervushin, D. / Ulianitsky, V. / Zlobin, S. / Sova, A. et al. | 2010
    1
    Comparative analysis of anti-cavitation and abrasion resistance properties of two different detonation coatings
    Huang, K.F. / Fang, J.P. / Wu, S.H. / Xu, B. / Ye, L. / Liu, Z.K. et al. | 2010
    1
    Thermal cycle resistance of oxidation-resistant metallic coatings
    Takahashi, S. / Hatano, M. / Kojima, Y. / Harada, Y. / Kawasaki, A. / Ono, F. et al. | 2010
    1
    Challenges for plasma spray deposition of decomposition-prone perovskite coatings
    Jarligo, M.O. / Mauer, G. / Mack, D. / Vassen, R. / Stöver, D. et al. | 2010
    1
    Mathematical modelling and simulation of a kerosene driven HVOF-process
    Bobzin, K. / Bagcivan, N. / Schäfer, M. et al. | 2010
    1
    Investigation of impact behavior of cold-sprayed large annealed copper particles and characterizations of coatings
    Li, W.Y. / Guo, X.P. / Liao, H.L. / Coddet, C. et al. | 2010
    1
    Wear behaviour and performance of a cost-effective iron-based, carbide-reinforced, sintered coating
    Lugbauer, M. / Badisch, E. / Kröll, A. et al. | 2010
    1
    In situ observation of impact phenomena of zirconia molten drops in millimeter scale via aerodynamic levitator
    Shinoda, K. / Nagashio, K. / Murakami, H. / Kuroda, S. / Kuribayashi, K. et al. | 2010
    1
    Corrosion of Ti coating prepared by modified HVOF process
    Deng, C.M. / Deng, C.G. / Liu, M. / Huang, J. / Zhou, K.S. / Chen, Z.K. / Wank, A. / Schwenk, A. et al. | 2010
    1
    Effect of powder compressive strength on deposition characteristics in cold spraying
    Sonoda, T. / Kuwashima, T. / Nakamura, M. / Saito, T. et al. | 2010
    1
    Microstructure of thermal sprayed silicon coatings using various particle sizes and spray conditions
    Jackson, D.D. / Sereda, M. / Gansert, R. et al. | 2010
    1
    Computational investigation of warm spray
    Tabbara, H. / Gu, S. / McCartney, G. et al. | 2010
    1
    Deposition of NiO/YSZ composite and YSZ by suspension plasma spray on porous metal
    Wang, Y. / Legoux, J.G. / Neagu, R. / Hui, R. / Maric, R. / Marple, B.R. et al. | 2010
    1
    Influence of substrate surface temperature on the microstructure and properties of plasma-sprayed Al2O3 coatings
    Hao, S. / Li, C.J. / Yang, G.J. / Xing, Y.Z. et al. | 2010
    1
    Influence of feedstock powder for fabrication of aluminum nitride in reactive atmospheric plasma spray process
    Shahien, M. / Yamada, M. / Yasui, T. / Fukumoto, M. et al. | 2010
    1
    Deposition of TiO2 ceramic particles on cold spray process
    Yamada, M. / Isago, H. / Shima, K. / Nakano, H. / Fukumoto, M. et al. | 2010
    1
    Oxidation behaviour of MCrAlY bond coats manufactured by plasma, HVOF and cold gas dynamic spraying
    Richer, P. / Yandouzi, M. / Beauvais, L. / Jodoin, B. et al. | 2010
    1
    Microstructure and mechanical properties of cold spray titanium coatings
    Gulizia, S. / Trentin, A. / Vezzu, S. / Rech, S. / King, P. / Jahedi, M. / Guagliano, M. et al. | 2010
    1
    Location of the powder injection as independent parameter to control particle velocity and temperature in cold spray
    Sova, A. / Kosarev, V. / Klinkov, S. / Smurov, I. et al. | 2010
    1
    Assessment of flame-sprayed glaze layers as diffusion barriers on refractory materials
    Preziosa, O. / Denoirjean, A. / Montavon, G. / Denoirjean, P. / Fauchais, P. / Chartier, T. / Barthelemy, C. / Laurent, V. / Lombard, D. et al. | 2010
    1
    Effects of WC particle size on deposition of cold spray WC-Co coatings
    Ang, S.M. / Berndt, C.C. / Cheang, P. / Wang, J. et al. | 2010
    1
    The shear test for thermally sprayed coatings in quality management
    Winkler, R. / Hartmann, S. / Deuerler, F. et al. | 2010
    1
    Thermally sprayed oxidation protection coatings for gamma-TiAl substrates
    Bobzin, K. / Schläfer, T. / Warda, T. / Brühl, M. et al. | 2010
    1
    New conventional plasma gun with high performance: ProPlasma HP
    Allimant, A. / Billieres, D. et al. | 2010
    1
    Effect of temperature on wear characteristic of cast iron
    Shaha, S.K. / Haque, M.M. / Dyuti, S. et al. | 2010
    1
    Near-net-shape HVOF coating and finishing techniques for highly stressed components in aircraft industry
    Matthäus, G. / Wolf, J. / Ackermann, D. et al. | 2010
    1
    Arc spraying of WC-FeCSiMn cored wires - Part 1: Bending, Compression and Tension Behavior
    Nebel, J. / Vogli, E. / Tillmann, W. et al. | 2010

    How to get this title?

    TIB document delivery Purchase
    Pricing information

    Export, share and cite

    Feedback