Comparison of two structure scales of plasma sprayed Al2O3-TiO2 coatings on mechanical and tribological properties (English)

How to get this document?

Al2O3-13 % wt TiO2 thermal sprayed coatings exhibit good wear resistance under tribological conditions, thanks to their high toughness. Alumina/titania coatings with two different structures, and similar titania content, have been elaborated by atmospheric plasma spraying (APS). The aim was to compare the effect of the structure on hardness and wear resistance. As feedstocks were used Al2O3-13 wt-% TiO2 powders with two different structures: micrometer sized ones, with two size distributions (5 - 30 micron and 15 - 45 micron), and agglomerated nano-meter sized particles (grain diameters between 200 to 500 nm) with a size distribution between 10 and 45 micron. Coatings were sprayed onto low carbon steel (XC38) substrates with several spray parameters, the plasma forming gas used being mixtures of Ar and H2 (45/15 and 53/17 SLM, respectively). Results show that, with the tribological conditions used in this study, the wear resistance of coatings principally depends of their hardness and not very much on the starting powder morphologies.

Table of contents conference proceedings

The tables of contents are generated automatically and are based on the data records of the individual contributions available in the index of the TIB portal. The display of the Tables of Contents may therefore be incomplete.

1
Improving powder injection in plasma spraying by optical diagnostics of the plasma and particle characterization
Mauer, G. / Vaßen, R. / Stöver, D. / Kirner, S. / Marques, J.L. / Zimmermann, S. / Forster, G. / Schein, J. | 2010
1
Corrosion behavior of NiCrBSi alloy coatings manufactured via in situ plasma spray - laser re-melting process
Serres, N. / Hlawka, F. / Costil, S. / Langlade, C. / Machi, F. | 2010
1
The Oxy-Fuel Ionization (OFI) Process - experimental process analysis
Parco, M. / Barykin, G. / Fagoaga, I. / Mariaux, G. / Goutier, S. / Vardelle, M. | 2010
1
Preparation process and property research of Fe-Cr-Al intermetallic compound coating
Wang, C. / Sun, H. / Liu, X. / Qu, Z. / Bi, J. | 2010
1
Improved hardfacing for drill bits and drilling tools
Sue, J.A. / Sreshta, H. / Qiu, B.H. | 2010
1
Effect of M-CrAlY coating for corrosion resistance in specific high temperature atmosphere
Niwa, A. / Hamashima, K. | 2010
1
HVOF spraying of ultrahigh boron-high carbon tool steel coating for wear resistance applications
Rajasekaran, B. / Mauer, G. / Vaßen, R. / Röttger, A. / Weber, S. / Theisen, W. | 2010
1
Characterization of high-temperature abrasive wear of cold-sprayed FeAl intermetallic compound coating
Wang, H.T. / Li, C.J. / Yang, G.J. / Zhao, S.N. / Bao, C.G. | 2010
1
Relationships between process parameters, microstructure and adhesion strength of HVOF sprayed IN718 coatings
Lyphout, C. / Nylen, P. / Ostergren, L. | 2010
1
Plasma sprayed NiCr coatings using a gas shroud system
Morks, M.F. / Berndt, C.C. | 2010
1
Degradation mechanisms of thermally sprayed coatings in chloride containing electrolytes
Laurila, J. / Niemi, K. / Vuoristo, P. | 2010
1
The PROTAL process applied on Cold Spraying to improve interface adherence and coating cohesion - case of titanium and nickel based alloys
Costil, S. / Irissou, E. / Danlos, Y. / Legoux, J.G. / Wong, W. / Yue, S. / Moreau, C. / Coddet, C. | 2010
1
Experimental investigation of fretting wear on nitrided and thermal spray coated Ti-6-4 parts for liftfan applications
Patil, P. / Sadeghi, F. / Dixit Satish, S. / Chin, M. | 2010
1
Duration and reliability of axial suspension plasma spray process
Tang, Z. / Hartell, P. / Masindo, G. / Bogdanovic, N. / Yaroslavski, I. / Kim, H. / Restrepo, J. / Ellsworth, D. / Burgess, A. | 2010
1
The performance of different WC-based cermet coatings in oil and gas applications - a comparison
Meng, H. / Neville, A. / Gourdji, P. / Hu, X. | 2010
1
Potential of cold gas spraying in power electronic applications
Donner, K.R. / Gaertner, F. / Klassen, T. | 2010
1
Cold spraying for titanium dioxide coatings with high photocatalytic bactericidal activity
Kliemann, J.O. / Gutzmann, H. / Gärtner, F. / Klassen, T. / Gabriel, H. | 2010
1
The next step in intelligent gun technology: EvoLink for plasma spraying
Koller, M. / Kilchenmann, A. | 2010
1
Plasma sprayed electrolyte of magnesium doped lanthanum silicate with apatite-type structure
Sun, F. / Liao, H. / Zhang, N. / Rapaud, O. / Coddet, C. | 2010
1
Surface pretreatments including laser texturing for thermal spraying
Lamraoui, A. / Langlade, C. / Costil, S. / Coddet, C. | 2010
1
Comparison of two structure scales of plasma sprayed Al2O3-TiO2 coatings on mechanical and tribological properties
Vargas, F. / Ageorges, H. / Xin, W. / Fauchais, P. / Lopez, M. | 2010
1
Influence of pores and cracks morphology on mechanical behavior of thermally sprayed ceramics
Musalek, R. / Matejicek, J. / Pejchal, V. / Mari, E. / Valarezo, A. / Sampath, S. | 2010
1
Effects of radial liquid injection on atmospheric plasma characteristics
Soysal, D. / Kavka, T. / Ansar, A. | 2010
1
Mechanical behaviour of air-plasma sprayed functionally graded YSZ-mullite environmental barrier coatings: A study via instrumented indentation
Cojocaru, C.V. / Wang, Y. / Lima, R.S. / Moreau, C. / Mesquita-Guimaraes, J. / Garcia, E. / Miranzo, P. / Osendi, M.I. | 2010
1
Phase composition and microstructural responses of crystalline mullite/YSZ coating under water vapor environments
Garcia, E. / Mesquita-Guimaraes, J. / Miranzo, P. / Osendi, M.I. / Cojocaru, C.V. / Wang, Y. / Moreau, C. / Lima, R.S. | 2010
1
Observation of microstructures in thermal sprayed coatings and single deposited splats using ion beam milling
Kim, K.H. / Watanabe, M. / Kuroda, S. / Kawano, N. | 2010
1
Cold spraying of Zn and Zn-alloy coatings for print
Onizawa, K. / Jansen, J. / Schulze, M. / Gärtner, F. / Klassen, T. | 2010
1
Investigation of atmospheric plasma sprayed tungsten carbide cobalt coatings using statistical design of experiments
Tillmann, W. / Vogli, E. / Kebs, B. | 2010
1
Transmission electron microscopy of cold sprayed titanium
King, P.C. | 2010
1
Effect of the nitrogen flow rate on the microstructure and transformation rate of TiN coatings in reactive plasma spraying
Yang, H. / Chen, H. | 2010
1
Design of experiment analysis of the Sulzer Metco DJ high velocity oxy-fuel coating of hydroxyapatite for orthopaedic applications
Hasan, S. / Stokes, J. | 2010
1
High temperature mechanical behaviour of UHTC coatings for thermal protection of re-entry vehicles
Pulci, G. / Tului, M. / Tirillo, J. / Marra, F. / Lionetti, S. / Valente, T. | 2010
1
Preparation of nanocomposite GDC/LSCF cathode material for IT-SOFC by RF induction plasma spraying
Shen, Y. / Gitzhofer, F. / Almeida, V. | 2010
1
Wire arc sprayed iron-based anti-corrosion coatings for waste incineration plants
Wilden, J. / Drescher, V. / Djahanbakhsh, M. / Durham, R. / Schütze, M. | 2010
1
Microstructures and adhesive bonding strength analysis of plasma sprayed silica modified hydroxyapatite coatings on Ti-6Al-4V substrates
Xu, J.L. / Khor, K.A. / Cizek, J. | 2010
1
Colferoloy - An iron-based alternative for wear resistance applications
Stratford, G.C. / Battenbough, A.J. / Allnatt, P.J. / Burkard, H. | 2010
1
Measurements of particles parameters at detonation spraying
Smurov, I. / Pervushin, D. / Chivel, Y. / Laget, B. / Ulianitsky, V. / Zlobin, S. | 2010
1
A preliminary study of the oxidation behavior of TBC with cold spray CoNiCrAlY bond coat
Chen, W.R. / Irissou, E. / Legoux, J.G. / Wu, X. / Marple, B.R. | 2010
1
Correlation of wear resistant functions of HVOF and warm sprayed WC-Co coatings with in-flight particle characteristics
Sato, K. / Kitamura, J. / Raman, G. / Watanabe, M. / Komatsu, M. / Kuroda, S. | 2010
1
Cyclic oxidation behavior of HVOF-sprayed Ni-20Cr coating on ASTM-SA213-T22 boiler steel at 900 deg C
Kaushal, G. / Prakash, S. / Sing, H. | 2010
1
Wear properties of Ni-based composite coatings sprayed by HVAF
Wu, C. / Zhou, K. / Liu, M. / Deng, C.G. / Deng, C.M. | 2010
1
Effect of ambient pressure and substrate temperature on heat transfer at interface between molten droplet and substrate surface
Fukumoto, M. / Tanaka, K. / Yang, K. / Usami, T. / Yasui, T. / Yamada, M. | 2010
1
Homogenization of coating properties in atmospheric plasma spraying - current results of a DFG (German Research Foundation)-funded research group
Bobzin, K. / Bagcivan, N. / Petkovic, I. / Schein, J. / Landes, K. / Forster, G. / Hartz-Behrend, K. / Kirner, S. / Marques, J.L. / Zimmermann, S. et al. | 2010
1
The improvements of thermal spray toolkit, extended software for robotic off-line programming
Fang, D. / Deng, S. / Liao, H. / Coddet, C. | 2010
1
Correlations between the oscillation modes of arc voltage and pressure in cathode cavity of DC plasma torches
Rat, V. / Coudert, J.F. | 2010
1
The advancement and positioning of laser cladding in the surface engineering industry
Marchione, Thierry / Dezert, Didier / Choong, Alex | 2010
1
Adhesion of YSZ nano-structured coating on Haynes 230 substrate
Vert, R. / Meillot, E. / Vardelle, A. / Mariaux, G. / Dublanche-Tixier, C. / Chicot, D. | 2010
1
The structure and properties of plasma sprayed Fe doped manganese cobalt oxide spinel coatings for SOFC metallic interconnectors
Puranen, J. / Lagerbom, J. / Hyvärinen, L. / Kylmälahti, M. / Vuoristo, P. | 2010
1
Effect of heat treatment on porosity and corrosion performance of cold sprayed titanium deposits
Hussain, T. / McCartney, D.G. / Shipway, P.H. / Marrocco, T. | 2010
1
Characterization of some electric arc sprayed cored-wire and nano cored-wire cermet coatings
Tuiprae, M. / Wirojanupatump, S. / Jiansirisomboon, S. | 2010
1
Microstructure and enhanced mechanical properties of WC-Co coatings obtained by warm spraying
Kuroda, S. / Raman, G. / Watanabe, M. / Komatsu, M. / Sato, K. / Kitamura, J. | 2010
1
Expansion of the applicable range of HVOF process conditions
Wank, A. / Schwenk, A. / Liu, M. / Zhou, K.S. / Deng, C.M. / Deng, C.G. | 2010
1
Plasma sprayed and electrospark deposited zirconium metal diffusion barrier coatings
Hollis, K.J. / Pena, M.I. | 2010
1
Relations between in flight particle characteristics and coating properties by HVOF-spraying
Tillmann, W. / Vogli, E. / Hussong, B. / Kuhnt, S. / Rudak, N. | 2010
1
Characterisation of corrosion resistant deposits by cold gas dynamic spray
Marrocco, T. / Harvey, D. / Hussain, T. | 2010
1
Development of a low-temperature, oxy-fuel (LTOF) thermal spray gun
Dhiman, R. / Farhadi, F. / Pershin, L. / Chandra, S. / Mostaghimi, J. | 2010
1
PIV measurements of metallic powders produced by liquid metal atomization using De Laval nozzle
Khatim, O. / Planche, M.P. / Dembinsky, L. / Coddet, C. / Bailly, Y. / Guermeur, F. / Girardot, L. | 2010
1
APS-Al2O3 coatings versus arc-sprayed and plasma-anodised Al layers
Lampke, T. / Meyer, D. / Pokhmurska, H. / Wielage, B. | 2010
1
Yttria deposition by a novel plasma torch
Pershin, L. / Mostaghimi, J. | 2010
1
Effect of powder preheating temperature on the properties of Cu-based amorphous coating layer by cold spray deposition
Cho, J. / Park, D. / Kim, J. / Lee, J. / Lee, K. | 2010
1
Mechanical properties and behaviour of BSAS/mullite-based environmental barrier coatings exposed to high temperature in water vapour environment
Cojocaru, C.V. / Kruger, S.E. / Lima, R.S. / Moreau, C. | 2010
1
The influence of particle temperature, particle velocity and coating surface temperature on the sliding wear performance of TiO2-Cr2O3 coatings
Trache, R. / Berger, L.M. / Saaro, S. / Lima, R.S. / Marple, B.R. | 2010
1
Thermal spray forming of high-efficiency, metal-foam heat exchanger tubes
Tsolas, N. / Chandra, S. / Salimjazi, H. / Pershin, V.I. / Mostaghimi, J. | 2010
1
Velocity diagnostics for gas velocity distributions in cold gas and plasma spraying using non-resonant laser scattering
Lange, S. / Sieber, M. / Forster, G. / Marques, J.L. / Schein, J. | 2010
1
Extension of erosion life of turbine housing for ship by thermal spray
Sonoya, K. / Nakamura, M. / Ishida, K. | 2010
1
Columnar structured thermal barrier coatings (TBCs) by thin film low pressure plasma spraying (LPPS-TFTM)
Hospach, A. / Mauer, G. / Vaßen, R. / Stöver, D. | 2010
1
Microstructure and electrochemical behavior of Sm(0.5)Sr(0.5)CoO3 deposited by solution precursor plasma spraying
Wang, X.M. / Li, C.X. / Li, C.J. / Tian, L.H. / Song, B. / Yang, G.J. | 2010
1
Arc spraying of WC-FeCSiMn cored wires - Part 2: Young's modulus measurement and simulation
Nebel, J. / Klusemann, B. / Vogli, E. / Tillmann, W. / Svendsen, B. | 2010
1
Addition of hBN to NiAl coatings deposited using APS and HVOF thermal spraying
Hsiao, W.T. / Su, C.Y. / Huang, T.S. / Liao, W.H. / Leu, M.S. | 2010
1
Consolidation of Al2O3/Al nanocomposite powder by cold spray
Poirier, D. / Legoux, J.G. / Drew, R.A.L. / Gauvin, R. | 2010
1
Effect of surface morphology of MCrAlY bond coats on the isothermal oxidation behavior
Li, Y. / Li, C.J. / Zhang, Q. / Xing, L.K. / Yang, G.J. | 2010
1
Characterization and performance evaluation of a helium recovery system designed for cold spraying
Legoux, J.G. / Irissou, E. / Desaulniers, S. / Bobyn, J. / Harvey, B. / Wong, W. / Gagnon, E. / Yue, S. | 2010
1
Comparison of Al2O3 and Al2O3-TiO2 coatings manufactured by aqueous and alcoholic suspension plasma spraying
Darut, G. / Valette, S. / Montavon, G. / Ageorges, H. / Denoirjean, A. / Fauchais, P. / Klyatskina, E. / Segova, F. / Salvador, M.D. | 2010
1
Comparative study of the electrical properties and microstructures of thermally sprayed alumina- and spinel-coatings
Toma, F.L. / Scheitz, S. / Berger, L.M. / Sauchuk, V. / Kusnezoff, M. | 2010
1
Microstructure and NO2 sensing performance of APS ZnO coatings
Zhang, C. / Debliquy, M. / Liao, H. | 2010
1
Oxide ion conductivity in dense apatite-type lanthanum silicate
Gao, W. / Liao, H.L. / Coddet, C. | 2010
1
A comparative study of the splat morphology and the splat-substrate interaction for NiCr sprayed on to stainless steel by both plasma and HVOF spraying
Brossard, S. / Munroe, P.R. | 2010
1
Research of plasma spraying process of nanostructured zirconia thermal barrier coating
Sun, H. / Wang, C. / Liu, X. / Qu, Z. / Bi, J. | 2010
1
Next generation thermal barrier coatings for the gas turbine industry
Curry, N. / Markocsan, N. / Li, X.H. / Tricoire, A. / Dorfman, M. | 2010
1
Effect of using liquid feedstock in a high pressure cold spray nozzle
Farvardin, E. / Stier, O. / Luthen, V. / Dolatabadi, A. | 2010
1
Study of the influence of pre-heated Al6061 substrate temperature on Al coatings deposited by cold spray
Rech, S. / Trentin, A. / Vezu, S. / Legoux, J.G. / Irissou, E. / Guagliano, M. | 2010
1
Comparison of structure and wear properties of Babbitt layers which are produced by Arc Spraying and Pouring
Korobov, Y. / Potechin, B. / Gogolev, L. / Ilushin, V. / Deviatiarov, M. | 2010
1
Effect of the ceramic component on cold sprayed metal ceramic coatings
Sova, A. / Kosarev, V. / Papyrin, A. / Smurov, I. | 2010
1
Tungsten-based coatings to increase the lifetime of permanent-mold casting molds
Wilden, J. / Drescher, V.E. | 2010
1
Thermally sprayed fine Fe-based materials for wear protection applications in the printing industry
Bobzin, K. / Schlaefer, T. / Warda, T. / Schaefer, M. | 2010
1
Portable high pressure cold spray process - equipment, coatings and applications
Karthikeyan, J. / Kay, C.M. / Hoell, H. | 2010
1
Influence of helium and nitrogen gases on the properties of cold gas dynamic sprayed pure titanium coatings
Wong, W. / Irissou, E. / Legoux, J.G. / Yue, S. | 2010
1
Structure and tribological characteristics of HVOF coatings sprayed from powder blends of Cr3C2-25NiCr and NiCrBSi alloy
Määttä, A. / Kanerva, U. / Vuoristo, P. | 2010
1
Evaluation of boron carbide based thermal sprayed coatings for tribological applications
Lima, C.R.C. / Rosales, M.J. / Camargo, F. | 2010
1
Effect of stand-off distance on EMAA splats deposited onto glass and mild steel substrates
Xie, W. / Saber-Samandari, S. / Wang, J. / Berndt, C.C. | 2010
1
Mathematical modelling and simulation of a kerosene driven HVOF-process
Bobzin, K. / Bagcivan, N. / Schäfer, M. | 2010
1
Comparison of cold spray and detonation coatings properties
Smurov, I. / Pervushin, D. / Ulianitsky, V. / Zlobin, S. / Sova, A. | 2010
1
Microstructures of metallic NiCrBSi coatings manufactured via hybrid plasma spray process
Serres, N. / Hlawka, F. / Costil, S. / Langlade, C. / Machi, F. | 2010
1
Composite coatings with drag reduction and self-cleaning properties
Wilden, J. / Drescher, V.E. / Schaaf, P. / Günschmann, S. | 2010
1
Challenges for plasma spray deposition of decomposition-prone perovskite coatings
Jarligo, M.O. / Mauer, G. / Mack, D. / Vassen, R. / Stöver, D. | 2010
1
Plasma spraying of Lanthanum Silicate electrolytes for Intermediate Temperature Solid Oxide Fuel Cells (ITSOFCs)
Dru, S. / Meillot, E. / Wittmann-Teneze, K. / Saboungi, M.L. / Benoit, R. | 2010
1
Comparative analysis of anti-cavitation and abrasion resistance properties of two different detonation coatings
Huang, K.F. / Fang, J.P. / Wu, S.H. / Xu, B. / Ye, L. / Liu, Z.K. | 2010
1
Thermal cycle resistance of oxidation-resistant metallic coatings
Takahashi, S. / Hatano, M. / Kojima, Y. / Harada, Y. / Kawasaki, A. / Ono, F. | 2010
1
Predicting the thermal conductivity of AlSi/polyester abradable coatings: effects of the numerical method
Bolot, R. / Seichepine, J.L. / Qiao, J.H. / Coddet, C. | 2010
1
Cavitation erosion properties and fracture morphology of thermal spray coatings
Kanno, A. / Takabatake, T. / Namba, Y. / Tani, K. / Uematsu, S. / Sugasawa, S. / Yoshioka, M. / Ishihara, Y. | 2010
1
Evaluation of the photocatalytic activity of TiO2-coatings prepared by different thermal spray techniques
Gutzmann, H. / Kliemann, J.O. / Albrecht, R. / Gärtner, F. / Klassen, T. / Toma, F.L. / Berger, L.M. / Leupolt, B. | 2010
1
Vapor phase deposition using a plasma spray process
Niessen, K. von / Gindrat, M. | 2010
1
Layer formation of cold-sprayed ceramic titanium dioxide layers on metal surfaces
Kliemann, J.O. / Gutzmann, H. / Gärtner, F. / Klassen, T. / Jursic, I. / Borchers, C. | 2010
1
Plasma sprayed LSCF oxygen electrode for SOFC
Ansar, A. / Soysal, D. / Ilhan, Z. / Wagner, N. | 2010
1
Crystal and micro structures of plasma sprayed yttrium oxide coatings by axial injection of fine powder slurries
Kitamura, J. / Mizuno, H. / Sato, K. / Tang, Z. / Burgess, A. | 2010
1
Influence of the surface state on the adherence of the coating: case of an alumina coating plasma sprayed on SiC composites
Costil, S. / Lukat, S. / Verdy, C. / Coddet, C. | 2010
1
Coating of aluminium components with iron-based nanocrystalline solidifying materials to improve wear resistance
Wilden, J. / Drescher, V.E. / Lehmann, O. | 2010
1
Characteristics of Cu film-like deposited by using VLPPS
Zhang, N. / Sun, F. / Zhu, L. / Verdy, C. / Planche, M.P. / Liao, H. / Coddet, C. | 2010
1
Measurement of particle emissions generated by arc spray and flame spray processes
Billieres, D. / Bemer, D. / Subra, I. / Lecler, M. / Regnier, R. / Morele, Y. / Gutha, J. | 2010
1
TBC dry ice stripping
Giolli, C. / Allegrini, B. / Duda, T. / Engl, L. / Giorgetti, A. / Groppetti, A. / Lanzi, A. / Pini, S. / Spagnoli, M. / Scrivani, A. | 2010
1
Metastable austenite type core wire for arc spraying - modeling of heat transfer in end face and coating structure analysis
Korobov, Y. / Filippov, M. / Belozertsev, A. / Neveszin, S. / Shymiakov, V. | 2010
1
Functionally graded coatings produced by means of twin wire arc spraying
Tillmann, W. / Vogli, E. / Abdulgader, M. | 2010
1
Thermophysical studies on thermally sprayed tungsten carbide-cobalt coatings
Thiele, S. / Sempf, K. / Jaenicke-Roessler, K. / Berger, L.M. / Spatzier, J. | 2010
1
Analysis of Fe-base materials and evaluation of their suitability for wear protection coatings
Pelz, A. | 2010
1
Ti-parts for aviation industry produced by cold spraying
Binder, K. / Gärtner, F. / Klassen, T. | 2010
1
Effect of powder compressive strength on deposition characteristics in cold spraying
Sonoda, T. / Kuwashima, T. / Nakamura, M. / Saito, T. | 2010
1
Influence of substrate surface temperature on the microstructure and properties of plasma-sprayed Al2O3 coatings
Hao, S. / Li, C.J. / Yang, G.J. / Xing, Y.Z. | 2010
1
Microstructure and mechanical properties of cold spray titanium coatings
Gulizia, S. / Trentin, A. / Vezzu, S. / Rech, S. / King, P. / Jahedi, M. / Guagliano, M. | 2010
1
New conventional plasma gun with high performance: ProPlasma HP
Allimant, A. / Billieres, D. | 2010
1
Arc spraying of WC-FeCSiMn cored wires - Part 1: Bending, Compression and Tension Behavior
Nebel, J. / Vogli, E. / Tillmann, W. | 2010
1
Deposition of NiO/YSZ composite and YSZ by suspension plasma spray on porous metal
Wang, Y. / Legoux, J.G. / Neagu, R. / Hui, R. / Maric, R. / Marple, B.R. | 2010
1
Thermally sprayed oxidation protection coatings for gamma-TiAl substrates
Bobzin, K. / Schläfer, T. / Warda, T. / Brühl, M. | 2010
1
Corrosion of Ti coating prepared by modified HVOF process
Deng, C.M. / Deng, C.G. / Liu, M. / Huang, J. / Zhou, K.S. / Chen, Z.K. / Wank, A. / Schwenk, A. | 2010
1
Effects of WC particle size on deposition of cold spray WC-Co coatings
Ang, S.M. / Berndt, C.C. / Cheang, P. / Wang, J. | 2010
1
Near-net-shape HVOF coating and finishing techniques for highly stressed components in aircraft industry
Matthäus, G. / Wolf, J. / Ackermann, D. | 2010
1
The shear test for thermally sprayed coatings in quality management
Winkler, R. / Hartmann, S. / Deuerler, F. | 2010
1
Computational investigation of warm spray
Tabbara, H. / Gu, S. / McCartney, G. | 2010
1
Location of the powder injection as independent parameter to control particle velocity and temperature in cold spray
Sova, A. / Kosarev, V. / Klinkov, S. / Smurov, I. | 2010
1
Effect of temperature on wear characteristic of cast iron
Shaha, S.K. / Haque, M.M. / Dyuti, S. | 2010
1
In situ observation of impact phenomena of zirconia molten drops in millimeter scale via aerodynamic levitator
Shinoda, K. / Nagashio, K. / Murakami, H. / Kuroda, S. / Kuribayashi, K. | 2010
1
Assessment of flame-sprayed glaze layers as diffusion barriers on refractory materials
Preziosa, O. / Denoirjean, A. / Montavon, G. / Denoirjean, P. / Fauchais, P. / Chartier, T. / Barthelemy, C. / Laurent, V. / Lombard, D. | 2010
1
Influence of feedstock powder for fabrication of aluminum nitride in reactive atmospheric plasma spray process
Shahien, M. / Yamada, M. / Yasui, T. / Fukumoto, M. | 2010
1
Microstructure of thermal sprayed silicon coatings using various particle sizes and spray conditions
Jackson, D.D. / Sereda, M. / Gansert, R. | 2010
1
Investigation of impact behavior of cold-sprayed large annealed copper particles and characterizations of coatings
Li, W.Y. / Guo, X.P. / Liao, H.L. / Coddet, C. | 2010
1
Deposition of TiO2 ceramic particles on cold spray process
Yamada, M. / Isago, H. / Shima, K. / Nakano, H. / Fukumoto, M. | 2010
1
Oxidation behaviour of MCrAlY bond coats manufactured by plasma, HVOF and cold gas dynamic spraying
Richer, P. / Yandouzi, M. / Beauvais, L. / Jodoin, B. | 2010
1
Wear behaviour and performance of a cost-effective iron-based, carbide-reinforced, sintered coating
Lugbauer, M. / Badisch, E. / Kröll, A. | 2010