E-Books durchsuchen

Mechanical Properties and Performance of Engineering Ceramics and Composites VII [2012]

1
Damage Sensitivity and Acoustic Emission of SiC/SiC Composite during Tensile Test and Static Fatigue at Intermediate Temperature after Impact Damage
15
Determination of Acoustic Emission Sources Energy and Application towards Lifetime Prediction of Ceramic Matrix Composites
27
Nondestructive Evaluation of Thermal Barrier Coatings by Optical and Thermal Imaging Methods
35
Visualization of Internal Defects in Ceramic Products by using a UT Probe Array
47
Evaluation of Ceramic Materials and Joints using UT and X‐Ray
57
Investigation of Non‐Destructive Evaluation Methods Applied to Oxide/Oxide Fiber Reinforced Ceramic Matrix Composite
69
Edge Chip Fracture Resistance of Dental Materials
85
High Pressure Seawater Impingement Resistance of Low Silica Aluminum Oxides
93
Wear Behavior of Ceramic/Metal Composites
101
Use of Ceramic Sliding Systems in a Prototype Gasoline Pump with Operating Pressures of up to 80 MPa
115
Machinability Studies of Al/SiC/B<sub>4</sub>C Metal Matrix Hybrid Composites using PCD 1600 Grade Insert
125
Fretting Fatigue Failure of Engineering Ceramics
133
Low CTE & High Stiffness Diamond Reinforced SiC Based Composites with Machineable Surfaces for Mirrors & Structures
143
Tailoring Microstructures in Mullite for Toughness Enhancement
153
Microstructures of La‐Doped Low Thermal Expansion Cordierite Ceramics
163
Strategies to Optimize the Strength and Fracture Resistance of Ceramic Laminates
175
Investigation of Critical Fiber Length in Phenol Matrix Based Short Fiber CFRP by Double Overlap Joints
183
Mechanical and Microstructural Characterization of C/C‐SiC Manufactured via Triaxial and Biaxial Braided Fiber Preforms
195
Influence of Fiber Fabric Density and Matrix Fillers as well as Fiber Coating on the Properties of OXIPOL Materials
207
Weave and Fiber Volume Effects in a PIP CMC Material System
219
Innovative Clay‐Cellulosic Biosourced Composite: Formulation and Processing
233
Processing and Testing Re<sub>2</sub>Si<sub>2</sub>O<sub>7</sub> Matrix Composites
243
Reaction Bonded Si/SiB<sub>6</sub>: Effect of Carbon Additions on Composition and Properties
253
Kinetics of Passive Oxidation of Hi‐Nicalon‐S SiC Fibers in Wet Air: Relationships between SiO<sub>2</sub> Scale Thickness, Crystallization, and Fiber Strength
261
Study on the Stiffness of Comeld Composites Joints
273
High‐Temperature Interlaminar Tension Test Method Development for Ceramic Matrix Composites
287
Tensile Fracture Mechanism of Silicon Impregnated C/C Composite
299
Effects of Target Supports on Foreign Object Damage in an Oxide/Oxide CMC
315
Experimental and Numerical Study on Application of a CMC Nozzle for High Temperature Gas Turbine
325
Author Index
i
Front Matter
Feedback