E-Books durchsuchen

Texture Evolution during Friction Stir Welding of Stainless Steel

Texture Development in Aluminum Friction Stir Welds

Microstructural Studies of a Friction‐Stir‐Welded AA5052

Effect of Microstructure on Mechanical Properties of Friction‐Welded Joints between Aluminum Alloys (6061, 5052) and 304 Stainless Steel

Effect of Texture on Fracture Limit Strain in Friction Stir Processed AZ31B Mg Alloy

Microstructure and Texture Analysis of Friction Stir Welds of Copper

The Effects of Texture on the Corrosion Resistance of SS304 Stainless Steel

Microstructural Characterization of Dual Phase Steels by Means of Electron Microscopy

Grain Size Effect on the Tensile Behavior of a FeMnC TWlP Steel in Relation with the Microstructure and Texture Evolutions

Combination of Two X‐Ray Diffraction Settings for Determining the Texture of Small Sheared Samples

Texture of Non‐Oriented Rolled Steels by X‐Ray and Electron Diffraction

Effect of Coating Texture on Powdering Behavior of Industrially Produced Galvannealed Coating on IF, IFHS and HSQ Grade Steels

Including Elastical Anisotropy Due to Texture in a Finite Element Model for the Prediction of Residual Stresses in Welds

Texture and Microstructure Evolution in a Fe‐Si CGO Sheet during the Processing Route before Secondary Recrystallization

Tem Study of the Inhibition Layer of Commercial Hot‐Dip Galvanized Steels

Measurement of the Texture Sharpness in Grain‐Oriented Electrical Steels

Effects of Composition and Coiling Temperature on Precipitation and Texture Formation in a Few Interstitial Free High Strength Steels

Microstructure and Texture Development in Warm Rolled High Strength IF Steels Containing Cu, P and B

Effect of Tin on the Texture of Nonoriented Electrical Steels

Effect of Cold Rolled Reduction on the Texture and Plastic Strain Ratio of 2205 Duplex Stainless Steel

Importance of Dislocation Substructures in Texture Control of Low Carbon Steel

Texture Control in Manufacturing Current and Future Grades of Low‐Carbon Steel Sheet

Relative Preference for Strain Localizations in Ultra Low Carbon Steel

Influence of Texture on Surface‐Roughening during Press Forming in Ti Added High Purity Ferritic Stainless Steel Sheets

Effect of Tin on the Recrystallization Behavior and Texture of Grain Oriented Electrical Steels

EBSD Investigation of Phase Transformation in Low Carbon Steels

A Monte‐Carlo Algorithm for the Zener Drag Effect in the Fe‐3%Si Magnetic Alloys

Effect of Strain and Strain Path on Deformation Twinning and Strain Induced Martensite in AlSl 316L and 304L Austenitic Stainless Steel

Analysis of the Formation and Growth of Recrystallizing Grains in if Steels by In‐situ EBSP

Stability of Secondary Recrystallization in Grain‐Oriented Silicon Steel

A Practical Investigation into Identifying and Differentiating Phases in Steel using Electron Backscatter Diffraction

Influence of Precipitate Distribution on Normal Grain Growth Simulation at the Beginning of the Secondary Recrystallization Annealing in a Fe‐3%Si Electrical Steel HiB ‐ Role of the MnS and AIN Precipitates

Microstructure and Texture Development during Cold Ring Rolling of 100Cr6

Development of Texture, Microstructure and Grain Boundary Character Distribution after Heavy Cold Rolling and Annealing in a Boron Added Interstitial Free (IF) Steel

Texture of Nb‐Containing Ferritic Stainless Steel after Secondary Recrystallization

Quantitative Prediction of Transformation Texture in Hot‐Rolled Steel Sheets by Multiple KS Relation

Crystallographic Characterization of a Phosphorus Added TRIP Steel

Microstructural and Textural Evolutions in a Cold Rolled High mn Twlp Steel

Stored Energy Evolution in a Cold‐Rolled if Steel

A Comparison of Texture Measurements Via EBSD and X‐RAY

The Measurement Approach of X‐Ray Residual Stress in Fe‐Ni Alloy with Different Textures

Influence of Grain Orientation on Magnetic Aging Behavior of a Non‐Oriented Silicon Steel Sheet

Eutectoid Point Shift and Orientation Relationships between Ferrite and Cementite in Pearlite in a High Magnetic Field

Characteristics of Recrystallization Texture of Cold‐Rolled IF Steel Sheet Annealed with a Magnetic Field in the Transverse Direction

Crystallographic Features during Martensitic Transformation in Ni‐Mn‐Ga Ferromagnetic Shape Memory Alloys

Grain Boundary Misorientation and CSL in Magnetically Annealed Fe‐0.75%Si

The Effect of Ultra‐High Magnetic Fields on Grain Growth and Recrystallization in Metals

A New Approach to Texturing and Grain Boundary Engineering by Magnetic Field Application

Effects of Magnetic Field Direction on Texture Evolution in a Cold‐Rolled IF Steel Sheet during High Magnetic Field Annealing

Electrochemical Behavior of (001), (100) and (110) Ti Single Crystals under Simulated Body Fluid Condition

Identification and Rationalization of Secondary Twin Variants in a Magnesium Alloy

Textures in HCP Titanium and Zirconium: Influence of Twinning

Texture and Microstructure Evolution during Asymmetric Rolling of Mg Alloys

Prediction of Anisotropic Properties in Mg Alloy Sheets Using the Crystal Plasticity Finite Element Method

Strain Hardening Behaviour of an Initially Textured Tl6AL4V Titanium Alloy as a Function of Strain Rate and Compression Direction

Texture Evolution during the Static Recrystallization of Three Binary Mg‐Y Alloys

Grain Size and Orientation Distribution Function of High Purity α‐Titanium

Textures in Titanium Alloys ‐ An Industrial Perspective on Deformation, Transformation and Properties

Annealing Related Microstructural Developments in a Two‐Phase ZR‐2.5 Nb Alloy

Texture Aspects of Delayed Hydride Cracking in Products from Zr‐Based Alloys

Effect of Twinning on the Strain Hardening Behaviors of Two Mg Alloys Deformed Along Four Different Strain Paths

EBSD Study of Annealing Rolled Zirconium

Texture Evolution during Multi‐Pass Equal Channel Angular Extrusion of Beryllium

A Mechanism of Determining the Formability of AZ31 near Room Temperature

An EBSD Study of the Misorientations Related to Dynamic Recrystallization in Mg AM30 Deformed At High Temperatures

Texture Evolution in Boron Modified Ti‐6Al‐4V Alloy

Heterogeneous Deformation in Single‐Phase Zircaloy 2

Texture of Magnesium Alloy Sheets Heavily Rolled by High Speed Warm Rolling

Microstructure and Texture Gradient in Titanium Severely Strained by Friction Roll Processing and Subsequent Annealing

Evolution of Transformation Texture in a Metastable B ‐ Titanium Alloy

Dislocations in Textured Mg‐4.5%Al‐1%Zn Alloy: TEM and Statistical Studies

Microstructure and Micro‐Texture Evolution of Compression Twins in Magnesium

Accessing the Texture Hull and Properties Closure by Rotation and Lamination: Results in the Primitive Basis of Dilation Functions

Correlation Relationship between Yield Strength and the Elastic Compliance for the Polycrystalline Nickel 201

Modeling Rolling Texture of Twinned Cu Single Crystals

Multiscale Modeling of Equal Channel Angular Extruded Aluminum with Strain Gradient Crystal Plasticity and Phenomenological Models

Effect of Deformation Constraints on the Texture Formation in Al‐5mass%Mg Solid Solution at High Temperatures

Spectral Methods in the Statistical Description and Design of Microstructure

A Comparison of Deformation Textures and Mechanical Properties Predicted by Different Crystal Plasticity Codes

Simulation of Texture Development in Pure Aluminum Deformed by Equal Channel Angular Pressing

Plastic Heterogeneity Due to Grain Boundaries and Its Influence on Global Deformation Textures

On the Correlation of Surface Texture and Strain Induced Surface Roughness in AA6XXX Aluminum Sheet

The Variation Range for the Results of FCC Texture Simulations Based on (111}<110> Slip

Development of Low Magnetism and Strongly Cube‐Textured Composite Ni‐7%W/Ni‐10%W Substrate for Coated Superconductor

Two‐Point Orientation Coherence Functions: An Orthonormal Series Solution

The Influence of Shear Bands on Microtexture Evolution in Polycrystalline Copper

Influence of Dislocation Stress on the Corrosion Behavior of (111) and (123) Surface Plane of Aluminum Single Crystal

Texture Randomization by Intense Shearing in Layered Al and Al(0.3%Sc) ARB‐Processed Sheet

Texture Development of Molybdenum Sheets during Last Step of Heat Treatment

Solute, Superplasticity and Texture Change in Aluminium Alloys

Texture‐Based Plastic Potentials in Stress Space

Hierarchical Multi‐Level Modelling of Plastic Anisotropy using Convex Plastic Potentials

Author Index

Front Matter