IEEE Transactions on Applied Superconductivity
Die Inhaltsverzeichnisse werden automatisch erzeugt und basieren auf den im Index des TIB-Portals verfügbaren Einzelnachweisen der enthaltenen Beiträge. Die Anzeige der Inhaltsverzeichnisse kann daher unvollständig oder lückenhaft sein.
Inhaltsverzeichnis
- 1
-
Analysis and Design of a Control System for the 100 T Pulsed High Magnetic Field Facility at WHMFCJiangtao Shi, / Xiaotao Han, / Jianfeng Xie, et al. | 2016
- 1
-
Study on Magnetic Field Mapping Method in the Center Volume of the Air-Core SolenoidLee, Sangjin et al. | 2016
- 1
-
Magnets for the ESRF Diffraction-Limited Light Source ProjectLe Bec, Gael / Chavanne, Joel / Villar, Francois et al. | 2016
- 1
-
Trapped Field Characteristics and Fracture Behavior of REBaCuO Bulk Ring During Pulsed Field MagnetizationMochizuki, Hidehiko / Fujishiro, Hiroyuki / Naito, Tomoyuki et al. | 2016
- 1
-
Concept Design of 100-T Pulsed Magnet at the Wuhan National High Magnetic Field CenterSun, Q. Q et al. | 2016
- 1
-
Mechanical and Magnetic Design of the Superferric Dipoles for the Super-FRS of the FAIR ProjectMunoz Garcia, J. E et al. | 2016
- 1
-
Approaches to Analyze Structural Issues of the European DEMO Toroidal Field Coil System at an Early Design StagePanin, A et al. | 2016
- 1
-
Manufacturing of the Casing Components for the JT-60SA Toroidal Field CoilsRossi, P et al. | 2016
- 1
-
Magnetic Design and Measurement Results of a CPMU Prototype at SSRFZhang, Wei et al. | 2016
- 1
-
Design and Performance Test of a Superconducting Compensation Solenoid for SuperKEKBXudong Wang, / Arimoto, Yasushi / Yamaoka, Hiroshi et al. | 2016
- 1
-
Impact of Indentation on the Critical Current of Bi2212 Round WireJing-Gang Qin, / Chao Dai, / Qiuliang Wang, et al. | 2016
- 1
-
Design and Performance Measurement of Control System for Elliptically Polarized Undulators in Taiwan Photon SourceChun-Yi Wu, / Chen, Jenny / Chih-Yu Liao, et al. | 2016
- 1
-
Development of a 15 T Nb3Sn Accelerator Dipole Demonstrator at FermilabNovitski, I et al. | 2016
- 1
-
Bending Tests of HTS Cable-In-Conduit Conductors for High-Field Magnet ApplicationsDe Marzi, G. / Allen, N. C. / Chiesa, L. et al. | 2016
- 1
-
Development of a Test Conduction-Cooled MgB2 CoilHori, Chishin et al. | 2016
- 1
-
Design and Analysis of New Vernier Permanent-Magnet Machine With Improved Torque CapabilityZhao, Wenxiang et al. | 2016
- 1
-
Study on Normal Zone Characteristics in a REBCO Insert Coil Induced by Quenches in an LTS Outsert CoilTsuchiya, Y et al. | 2016
- 1
-
Through-Wall Excitation of a Magnet Coil by an External-Rotor HTS Flux PumpBumby, Chris W et al. | 2016
- 1
-
Design and Optimization of Bearingless Permanent Magnetic Synchronous MotorsWei Pan, / Huangqiu Zhu, / Hui Li, et al. | 2016
- 1
-
Structural Integrity of the NHMFL Series-Connected Hybrid Magnet CryostatsLi, Tianlei et al. | 2016
- 1
-
Reducing Joint Resistance by Heat Treatment During Fabrication of a Mechanical Joint of High-Temperature Superconducting ConductorsNishio, Tatsuki et al. | 2016
- 1
-
Multiobjective Optimization Design of Small-Scale Wind Power Generator With Outer Rotor Based on Box-Behnken DesignLee, Sung-Ho et al. | 2016
- 1
-
Numerical and Experimental Study on Current Distribution of LTS/HTS Hybrid SuperconductorWei Pi, / Yansen Ou, / Yinshun Wang, et al. | 2016
- 1
-
Structure and Magnetic Field Dependences of Joint Resistance in a Mechanical Joint of REBCO TapesIto, Satoshi / Seino, Yutaro / Nishio, Tatsuki et al. | 2016
- 1
-
Design and Fabrication of a Special Purpose Winding Machine for ELM Control Coils of JETGhate, Mahesh et al. | 2016
- 1
-
Thermal Stability of Conduction-Cooled HTS Magnets for Rotating GantryTakayama, S et al. | 2016
- 1
-
Air-Gap Flux Density Characteristics Comparison and Analysis of Permanent Magnet Vernier Machines With Different Rotor TopologiesZhang, Yang et al. | 2016
- 1
-
Field Quality Dependence on Vacuum Chamber Materials in Quadrupole MagnetsVanherpe, Liesbeth / Zickler, Thomas et al. | 2016
- 1
-
Design and Analysis of Five-Phase Fault-Tolerant Interior Permanent-Magnet Vernier MachineLiu, Guohai et al. | 2016
- 1
-
Evaluation of Irregular Magnetic Field Generated by Screening Current in REBCO Coils for High Accuracy FieldMatsumi, Ayako / Ueda, Hiroshi / Noguchi, So et al. | 2016
- 1
-
Application of Transient Electromagnetic Simulation to the DC-Biased AC Dipole Magnet for CSNS/RCSXianjing Sun, / Qing Li, / Wen Kang, et al. | 2016
- 1
-
Direct Drive and Eddy Current Septa Magnet Designs for CERN's PSB Extraction at 2 GeVSzoke, Z. / Atanasov, M. G. / Balhan, B. et al. | 2016
- 1
-
Study on Improvement of the Stability for the Superconducting Current-Limiting Element Using Cores and CoilsDu, Ho-Ik et al. | 2016
- 1
-
Cold Powering Tests of 11-T Nb3Sn Dipole Models for LHC Upgrades at CERNWillering, G. / Bajko, M. / Bordini, B. et al. | 2016
- 1
-
Optimization of the ITER Cryodistribution for an Efficient Cooling of the Magnet SystemChang, H.-S et al. | 2016
- 1
-
Design Study of 15-MW Fully Superconducting Generators for Offshore Wind TurbineSaruwatari, M et al. | 2016
- 1
-
Production Status of the SIS100 Superconducting Magnets for FAIRFischer, Egbert / Roux, Christian / Sugita, Kei et al. | 2016
- 1
-
New Analysis Framework Software for the CERN Superconducting Magnet Test FacilityGomez de la Cruz, M. F. / Andreassen, O. / Bajas, H. et al. | 2016
- 1
-
Development Status of a 2-m Model Magnet of Beam Separation Dipole for the HL-LHC UpgradeSugano, M. / Enomoto, S. / Nakamoto, T. et al. | 2016
- 1
-
Targeting Behavior of Magnetic Particles Under Gradient Magnetic Fields Produced by Two Types of Permanent MagnetsQuanliang Cao, / Zhen Wang, / Bo Zhang, et al. | 2016
- 1
-
Numerical Study on Silver Diffusion Joints of Coated Conductors by Finite-Element MethodSheng, J. / Zeng, W. / Wu, W. et al. | 2016
- 1
-
Simulation Method for Current-Limiting Effect of Saturated-Core Superconducting Fault Current LimiterYuelong Jia, / Jiansheng Yuan, / Zhengjun Shi, et al. | 2016
- 1
-
Performance of SCU15: The New Conduction-Cooled Superconducting Undulator for ANKABoffo, C. / Gerhard, T. / Turenne, M. et al. | 2016
- 1
-
Analysis of ITER Magnet in Safety-Related Fault Condition—Case Study for PF3Hamada, K. / Mitchell, N. / Foussat, A. et al. | 2016
- 1
-
The Fast-Pulsed Superconducting Dipole Prototype Magnet of HIAF at IMPXiaoying Zhang, / Beiming Wu, / Yuquan Chen, et al. | 2016
- 1
-
Optimization-Based Reconfiguration Method for Power System Incorporating Superconducting Fault Current Limiter FailureSeongbae Kong, / Hyung-Chul Jo, / Young-Min Wi, et al. | 2016
- 1
-
Mechanical and Thermal Properties of Central Former Material for High-Current Superconducting CablesWeiss, K.-P / Bagrets, N. / Sas, J. et al. | 2016
- 1
-
Design and Implementation of Control System for TPS Pulsed Magnet Power SupplyYung-Sen Cheng, / Chun-Yi Wu, / Chih-Yu Liao, et al. | 2016
- 1
-
Cable Behavior During Manufacture of a 900-m Scale CICCSuwa, Tomone / Nabara, Yoshihiro / Takahashi, Yoshikazu et al. | 2016
- 1
-
Study on Initial Current-Limiting Performance of the Resistive-Type SFCL Element According to the Electrical Coupling Condition With Cores and CoilsHo-Ik Du, / Byoung-Sung Han, / Gong-Hyun Hong, et al. | 2016
- 1
-
Influence of Manufacturing Accuracy on Magnetic Field Distribution in Magnet for HTS Rotating GantryTakayama, S. / Koyanagi, K. / Tosaka, T. et al. | 2016
- 1
-
Dynamic Field Integrals in Taiwan Photon Source UndulatorsJui-Che Huang, / Ting-Yi Chung, / Kitamura, Hideo et al. | 2016
- 1
-
Construction Status of the Superconducting Magnet System for JT-60SAYoshida, K. / Kizu, K. / Tsuchiya, K. et al. | 2016
- 1
-
Design of a Multipulse High-Magnetic-Field System Based on Flywheel Energy StorageYun Xu, / Hongwen Pi, / Tieqiang Ren, et al. | 2016
- 1
-
Effects of Stabilizer Thickness of 2G HTS Wire on the Design of a 1.5-MW-Class HTS Synchronous MachineJi Hyung Kim, / Thanh Dung Le, / Do Jin Kim, et al. | 2016
- 1
-
Persistent Current Mode Operation of A 2G HTS Coil With A Flux PumpSeyeon Lee, / Woo-Seok Kim, / Yungil Kim, et al. | 2016
- 1
-
Design and Comparison of a 1-MW/5-s HTS SMES With Toroidal and Solenoidal GeometryMorandi, Antonio / Fabbri, Massimo / Gholizad, Babak et al. | 2016
- 1
-
CLIQ-Based Quench Protection of a Chain of High-Field Superconducting MagnetsRavaioli, E. / Datskov, V. I. / Kirby, G. et al. | 2016
- 1
-
Thermal Stability of Conductor Joint for JT-60SA Central SolenoidNakamura, K. / Yamamoto, Y. / Suzuki, K. et al. | 2016
- 1
-
Dynamic Experiments of Strain and Magnetic Field for Galfenol Rod and Its ModelingLing Weng, / Qing Zhao, / Ying Sun, et al. | 2016
- 1
-
Simulations of Nonuniform Behaviors of Multiple No-Insulation (RE)Ba2Cu3O7-x HTS Pancake Coils During Charging and DischargingHonghai Song, / Yawei Wang, et al. | 2016
- 1
-
Design and Analysis of a Double-Stator Linear–Rotary Permanent-Magnet MotorLei Xu, / Mingyao Lin, / Xinghe Fu, et al. | 2016
- 1
-
Preliminary Design of Central Solenoid of SST-2 and DemoPrasad, U. / Srinivasan, R. / Pradhan, S. et al. | 2016
- 1
-
Comparison of Characteristics of Permanent-Magnet Linear Oscillating Actuator According to Laminated Method of Stator CoreKim, K. H. / Park, H. I. / Jeong, S. S. et al. | 2016
- 1
-
The Design of Superconducting Separation Dipoles D2 for the High Luminosity Upgrade of LHCFarinon, S. / Fabbricatore, P. / Curreli, S. et al. | 2016
- 1
-
Comparison Study of Electromagnetic Performance of Bearingless Flux-Switching Permanent-Magnet MotorsHongyun Jia, / Jianan Wang, / Ming Cheng, et al. | 2016
- 1
-
Design, Implementation, and Testing of a Pulsed Electromagnetic Blank Holder SystemZhipeng Lai, / Quanliang Cao, / Xiaotao Han, et al. | 2016
- 1
-
Transport Performance and Current Distribution of HTS Current Lead Prepared by YBCO TapesMatsumura, Ryosuke / Hosono, Yuto / Tanimoto, Ryosuke et al. | 2016
- 1
-
Advanced Design and Operation Consideration for Close-Connected Winding Permanent-Magnet Brushless DC MachineLi Zhu, / Shuangxia Niu, / Wang, Y. C. et al. | 2016
- 1
-
Demonstration of a Conduction Cooled React and Wind MgB2 Coil Segment for MRI ApplicationsKim, H. S. / Kovacs, C. / Rindfleisch, M. et al. | 2016
- 1
-
Magnetic Response of the Stacks of HTS TapesRudnev, Igor A. / Podlivaev, Alexey I. et al. | 2016
- 1
-
Electro-Mechanical Properties of Single-Side Brass Foil Laminated Coated Conductor Tapes at 77 K Under Self-FieldHyung-Seop Shin, / Bautista, Zhierwinjay / Gorospe, Alking et al. | 2016
- 1
-
Effect of the Magnetic Configuration on the Rotational Motion in the Attractive-Type HTS-Permanent Magnet Hybrid BearingSakai, Shinichiro / Oguni, Koichi / Ohashi, Shunsuke et al. | 2016
- 1
-
Physical Properties of a High-Strength Austenitic Stainless Steel for the Precompression Structure of the ITER Central SolenoidSgobba, Stefano / Langeslag, Stefanie Agnes Elisabeth / Arauzo, Ana et al. | 2016
- 1
-
Fast Ramped Quadrupoles for the Transition Jump Scheme of the SIS100 Synchrotron of the FAIR ProjectLeibrock, Hanno / Meier, Jan Patrick / Muhle, Carsten et al. | 2016
- 1
-
An Axial-Field Flux-Modulated Magnetic GearDehong Zhu, / Fei Yang, / Yi Du, et al. | 2016
- 1
-
Research on Electromagnetic and Thermal Issue of High-Efficiency and High-Power-Density Outer-Rotor MotorLiyi Li, / Jiangpeng Zhang, / Chengming Zhang, et al. | 2016
- 1
-
20-T Dipole Magnet With Common-Coil Configuration: Main Characteristics and ChallengesXu, Qingjin et al. | 2016
- 1
-
Stress-Strain Relationship, Critical Strain (Stress) and Irreversible Strain (Stress) of IBAD-MOCVD-Based 2G HTS Wires Under Uniaxial TensionZhang, Y et al. | 2016
- 1
-
Development of MQXF: The Nb3Sn Low- \beta Quadrupole for the HiLumi LHCJuchno, M et al. | 2016
- 1
-
Completion of the Commissioning of the EDIPO Test FacilityBruzzone, P. / March, S. / Stepanov, B. et al. | 2016
- 1
-
Magnetic Measurements and Analysis of the First 11-T Nb3Sn Dipole Models Developed at CERN for HL-LHCFiscarelli, L et al. | 2016
- 1
-
Experimental Investigation on Stability of LTS/HTS Hybrid Superconducting CoilPi, Wei et al. | 2016
- 1
-
Analysis of the Notch Effect on Flux Diverters for High-Temperature Superconducting MagnetsSeunghyun Song, / Woo Seung Lee, / Young Gun Park, et al. | 2016
- 1
-
Dimensional Changes of Nb3Sn Rutherford Cables During Heat TreatmentRochepault, E. / Ferracin, P. / Ambrosio, G. et al. | 2016
- 1
-
Study on Magnetic Separation Device for Scale Removal From Feed-Water in Thermal Power PlantShibatani, Saori et al. | 2016
- 1
-
Statistics of Test Results for the ITER Nb3Sn and NbTi Conductors in the SULTAN FacilityStepanov, Boris / Bruzzone, Pierluigi / Sedlak, Kamil et al. | 2016
- 1
-
Design of Indirect Closed-Cycle Cooling Scheme Coupled With a Cryocooler for a 3-MW-Class High-Temperature Superconducting Synchronous MotorLe, Thanh Dung et al. | 2016
- 1
-
Noncontact High-Torque Magnetic Coupler for Superconducting Rotating MachinesMichael, Philip C. / Hensley, Sarah L. / Galea, Christopher A. et al. | 2016
- 1
-
Fabrication and Analysis of 150-mm-Aperture Nb3Sn MQXF CoilsHolik, E. F et al. | 2016
- 1
-
In-Depth Induction Heating of Large Steel Slabs by Means of a DC Saturating Field Produced by Superconducting CoilsMorandi, Antonio et al. | 2016
- 1
-
Toward a High-Current Conductor Made of HTS CrossConductor StrandsWolf, Michael J. / Bayer, Christoph M. / Fietz, Walter H. et al. | 2016
- 1
-
Degradation of a REBCO Coil Due to Cleavage and Peeling Originating From an Electromagnetic ForceKajita, Kentaro et al. | 2016
- 1
-
400-MHz/60-mm All-REBCO Nuclear Magnetic Resonance Magnet: Magnet DesignKwang Lok Kim, / Sangwon Yoon, / Kyekun Cheon, et al. | 2016
- 1
-
Mu2e Transport Solenoid Prototype Design and ManufacturingFabbricatore, P et al. | 2016
- 1
-
A Pulsed Magnet System for a Field-Reversed Configuration ExperimentLieurance, Dennis W. / Madura, David D. / Snitchler, Gregory L. et al. | 2016
- 1
-
A Parametric Study on Overband Radial Build for a REBCO 800-MHz Insert of a 1.3-GHz LTS/HTS NMR MagnetMingzhi Guan, / Seungyong Hahn, / Bascunan, Juan et al. | 2016
- 1
-
Experimental Results of Screening-Current Field With 10-T Class Small REBCO CoilIwai, S et al. | 2016
- 1
-
Development of Critical Current Measurement System of HTS Tape Using Pulsed CurrentKim, A-Rong et al. | 2016
- 1
-
Design of a 4.7-T Wavelength Shifter With Cryogenic Permanent Magnets at NSRRCYu, Yung-Teng et al. | 2016
- 1
-
Resistive Superconducting Fault Current Limiter AC Loss Measurements and AnalysisXiaoze Pei, / Xianwu Zeng, / Smith, Alexander C. et al. | 2016
- 1
-
Hardware-in-the-Loop Simulation of Superconducting Devices for DC Electric Railway Systems Based on a Real-Time Digital SimulatorHigashikawa, Kohei et al. | 2016
- 1
-
Results of the Testing of ITER CC HTS Current Lead PrototypesDing, K et al. | 2016
- 1
-
Mechanical Properties of ITER Coil CICC Steel Jackets ProductionRomano, Gennaro et al. | 2016
- 1
-
F4E Procurement of Radial Plates for the EU ITER TF Coils (October 2015)Boter, E et al. | 2016
- 1
-
Upcoming Special Conference Issues $^{\ast}| 2016
- 1
-
JT-60SA TF Magnets Industrial Production Status at AlstomDecool, P et al. | 2016
- 1
-
Thermal-Hydraulic Analysis of the Low- $T_{c}$ Superconductor (LTS) Winding Pack Design Concepts for the DEMO Toroidal Field (TF) CoilLewandowska, Monika et al. | 2016
- 1
-
Resistive Insert Magnet Designs for the Series-Connected Hybrids Developed at the NHMFLToth, Jack et al. | 2016
- 1
-
Development of a Quasi-Isotropic Strand Stacked by 2G WiresWang, Yinshun et al. | 2016
- 1
-
Conceptual Design of a Resistive 154-kV/2-kA Superconducting Fault Current LimiterLee, Hongseok et al. | 2016
- 1
-
The CLAS12 Torus Detector Magnet at Jefferson LaboratoryLuongo, Cesar / Ballard, Joshua / Biallas, George et al. | 2016
- 1
-
Comparison of DC and AC Surface Breakdown Characteristics of GFRP and Epoxy Nanocomposites in Liquid NitrogenJae-Hong Koo, / Jae-Sang Hwang, / Woo-Ju Shin, et al. | 2016
- 1
-
Novel Test Method for AC Current-Carrying Capability in the Consideration of Alternating Magnetic FieldJiwei Cao, / Chengming Zhang, / Zhengnan Han, et al. | 2016
- 1
-
Edgewise Bending Strain in Helical Coils With Geodesic Windings Based on Virial TheoremTsutsui, Hiroaki / Tsuji-Iio, Shunji / Nomura, Shinichi et al. | 2016
- 1
-
Influence of Anisotropy in Low Magnetic Field on 2G HTS Pancake Coils Under Liquid NitrogenZhang, H. / Zhang, M. / Zhu, J. et al. | 2016
- 1
-
MT-24 Conference Chair's IntroductionGueesoo Cha, et al. | 2016
- 1
-
Performance Test of an 8 kA @ 10-T 4.2-K ReBCO-CORC CableMulder, Tim / Dudarev, Alexey / Mentink, Matthias et al. | 2016
- 1
-
Shimming for the 1020 MHz LTS/Bi-2223 NMR MagnetIguchi, Seiya / Yanagisawa, Yoshinori / Takahashi, Masato et al. | 2016
- 1
-
A Compact Superconducting Solenoid for China-ADS Injector IITongjun Yang, / Ping Yuan, / Luncai Zhou, et al. | 2016
- 1
-
The 11 T Dipole for HL-LHC: Status and PlanSavary, F. / Barzi, E. / Bordini, B. et al. | 2016
- 1
-
Fundamental Study for Resource Recovery From Urban Mine by Magneto-Archimedes EffectMatsuura, Y. / Miura, O. et al. | 2016
- 1
-
Investigation of the Inter-Coil Structures Influence on the Mechanical Behavior of the TF Magnet in a Tokamak MachineReccia, Luigi / D'Amico, Gabriele / Portone, Alfredo et al. | 2016
- 1
-
“Block-Type” Coils Fabrication Procedure for the Nb3Sn Dipole Magnet FRESCA2Rondeaux, F. / Ferracin, P. / Durante, M. et al. | 2016
- 1
-
Wendelstein 7-X–Commissioning of the Superconducting Magnet SystemRisse, Konrad / Birus, Dietrich / Bosch, Stephan et al. | 2016
- 1
-
Simulation of an Electromagnetic Launcher With a Superconducting Inductive Pulsed Power SupplySizhuang Liang, / Youtong Fang, / Xiaoyan Huang, et al. | 2016
- 1
-
Design on Magnetic Coupling Resonance Wireless Energy Transmission and Monitoring System for Implanted DevicesGuizhi Xu, / Xinsheng Yang, / Qingxin Yang, et al. | 2016
- 1
-
Design Study of a 10-T REBCO Insert SolenoidBorgnolutti, F. / Badel, A. / Benkel, T. et al. | 2016
- 1
-
An Equivalent Circuit Model and Energy Extraction Technique of a Magnetostrictive Energy HarvesterShuying Cao, / Song Yang, / Jiaju Zheng, et al. | 2016
- 1
-
Persistent-Current Magnetization Effects in High-Field Superconducting Accelerator MagnetsBermudez, S. Izquierdo / Bottura, L. / Todesco, E. et al. | 2016
- 1
-
2-D Mechanical Design Study of a 20-T Two-in-One Common-Coil Dipole Magnet for High-Energy AcceleratorsKai Zhang, / Qingjin Xu, / Zian Zhu, et al. | 2016
- 1
-
Comparison of Coaxial Magnetic Gears With and Without Magnetic Conducting RingWenxiang Zhao, / Jin Liu, / Jinghua Ji, et al. | 2016
- 1
-
Critical Performance Analysis of HTS Magnet Wires Using an Induced Current-Based Measurement SystemGo, B. S. / Kim, K. / Jeong, S. H. et al. | 2016
- 1
-
Generation and Confinement of Uniform Magnetic Field Using Second-Generation Superconducting Racetrack CoilsBaghdadi, Mehdi / Matsuda, Koichi / Wei Wang, et al. | 2016
- 1
-
A High Precision Power Supply for Fast Pulse Current With a Digital Control SystemKurimoto, Yoshinori et al. | 2016
- 1
-
Electromagnetically Driven Expanding Ring Test for the Strength Study of the Zylon/Epoxy CompositeJiang, F. / Sun, Q. Q. / Lai, Z. P. et al. | 2016
- 1
-
A High Precision 3D Magnetic Field Scanner for Small to Medium Size MagnetsBergsma, F. / Blanc, P. H. / Garnier, F. et al. | 2016
- 1
-
Axial Tension and Overcurrent Study on a Type of Mass-Producible Joint for ReBCO Coated ConductorsMa, J. / Zhu, J. M. / Wu, W. et al. | 2016
- 1
-
The Field Measurement of the Injection Painting Bump Magnets for CSNS/RCSLihua Huo, / Yiqin Liu, / Lei Wang, et al. | 2016
- 1
-
Newly Fabricated Resistive Magnets of SuperKEKB Interaction RegionMasuzawa, Mika / Egawa, Kazumi / Iinuma, Hiromi et al. | 2016
- 1
-
Study on a Novel Pseudo-Six-Phase Linear Flux-Switching Permanent-Magnet Machine for Direct DriveWeibo Zhong, / Haitao Yu, / Minqiang Hu, et al. | 2016
- 1
-
Status of the 43-T Hybrid Magnet of LNCMI-GrenoblePugnat, P. / Barbier, R. / Berriaud, C. et al. | 2016
- 1
-
Influence of Strands Trajectories of JT-60SA TF Conductors on Their Hydraulic and Electromagnetic PropertiesZani, L. / Barabaschi, P. / Di Pietro, E. et al. | 2016
- 1
-
Experimental Analysis on AC Loss and Fault Current Test of HTS Coils Co-Wound With Various Inserted MaterialsJinsub Kim, / Seokho Nam, / Haeryong Jeon, et al. | 2016
- 1
-
Conductor Performance of CCCN3, CCCN4, and CCCN5 Samples for ITER CC CoilsBo Liu, / Yu Wu, / Jing-Gang Qin, et al. | 2016
- 1
-
Commissioning of Horizontal-Bend Superconducting Magnet for Jefferson Lab's 11-GeV Super High Momentum SpectrometerSun, Eric / Brindza, Paul / Lassiter, Steven et al. | 2016
- 1
-
Electromagnetic Analysis of Flux Characteristics of Double-Sided Switched Reluctance Linear MachineChen, H. / Yan, W. / Wang, Q. et al. | 2016
- 1
-
Economic Evaluation Method for Fault Current Limiting Superconducting Cables Considering Network Congestion in a Power SystemDongyeon Lee, / Hyung-Chul Jo, / Sung-Kwan Joo, et al. | 2016
- 1
-
Influence of Artificial Pinning Centers on Strain Effect in BaHfO3-Doped \mbox\mbox\mbox-Coated Conductors Fabricated by Pulsed Laser DepositionUsami, T et al. | 2016
- 1
-
Design of a Current-Controlled Power Supply for High-Stability Flat-Top Pulsed Magnetic FieldHongfa Ding, / Jun Zhou, / Yun Xu, et al. | 2016
- 1
-
Phase Relationship and Magnetostriction of Tb–Dy–Ho–Fe AlloysBowen Wang, / Shuying Cao, / Wenmei Huang, et al. | 2016
- 1
-
Developments of Nondestructive Test Method of Jacket Section for ITER Poloidal Field CoilsLiu, Xiaochuan et al. | 2016
- 1
-
Surface Discharge Characteristics of GFRP in GN2 and LN2 for Designing a Superconducting Coil SystemMo, Young Kyu et al. | 2016
- 1
-
Development of Low-Resistance Splice Joint for Long GdBCO Coated Conductor Tapes Using Ultrasonic Welding MethodShin, Hyung-Seop et al. | 2016
- 1
-
Design of a Dual-Stator LTS Vernier Machine for Direct-Drive Wind Power GenerationYuting Gao, / Ronghai Qu, / Dawei Li, et al. | 2016
- 1
-
Quench Detection Method for the Inductively Coupled Superconducting Magnets of KATRINGil, Woosik et al. | 2016
- 1
-
Critical Current of Various REBCO Tapes Under Uniaxial StrainZhou, C. / Yagotintsev, K. A. / Gao, P. et al. | 2016
- 1
-
First Hybrid Magnet for Neutron Scattering at Helmholtz-Zentrum BerlinSmeibidl, Peter / Bird, Mark / Ehmler, Hartmut et al. | 2016
- 1
-
Creepage Discharge Characteristics Along the Interface Between Two Solid Insulation Materials in GN2Onyou Lee, / Young Kyu Mo, / Junil Kim, et al. | 2016
- 1
-
Sextupole Magnets With Variable Tilting Angle for SuperKEKBSugahara, Ryuhei / Kawamoto, Takashi / Masuzawa, Mika et al. | 2016
- 1
-
Research on Three-Dimensional Stress Distribution of Reactor CoreYan, Rongge et al. | 2016
- 1
-
JT-60SA TF Coils: Experimental Check of Hydraulic Operating ConditionsDecool, P et al. | 2016
- 1
-
Measurements and Analysis of Dynamic Effects in the LARP Model Quadrupole HQ02b During Rapid DischargeSorbi, Massimo et al. | 2016
- 1
-
Discharge Voltage Effects on High- \text Superconducting Tapes With Respect to Tensile StressNam, Seokho et al. | 2016
- 1
-
The Ultra-Stable Magnet of the Mark II ExperimentTommasini, D et al. | 2016
- 1
-
AC Losses and Their Thermal Effect in High-Temperature Superconducting MachinesSong, Xiaowei et al. | 2016
- 1
-
An Antisymmetric Design of a Permanent-Magnet Phase Shifter for a Tandem EPU at TPSChung, TingYi et al. | 2016
- 1
-
Dynamic Analysis of Transformers With Second-Generation High-Temperature SuperconductorsHongwei Liu, / Ming Qiu, / Jiahui Zhu, et al. | 2016
- 1
-
Concurrent Solenoid Design Optimization From Thermal and Electromagnetic StandpointsYang, Sam et al. | 2016
- 1
-
High-Temperature Superconducting GdBCO Conductor Laminated With Al Alloy TapesOh, Sang-Soo et al. | 2016
- 1
-
A Study on Critical Current and AC Loss Characteristics of Novel 2G HTS Narrow WiresLi, Z. Y. / Li, J. / Wang, Y. et al. | 2016
- 1
-
Study on the Magnetic Field Homogeneity of HTS Bulk Magnets Including the Degraded HTS Bulk for Developing the Compact NMR RelaxometryKim, S. B et al. | 2016
- 1
-
Study on Volume Reduction of Cesium Contaminated Soil by Magnetic SeparationYukumatsu, Kazuki et al. | 2016
- 1
-
Performance Analysis and Prototype Design of a D-Core-Type Single-Phase HTS Controllable ReactorWang, Zuoshuai et al. | 2016
- 1
-
Analysis of Magnetizing Process Using the Discharge Current of Capacitor by T\text\Omega MethodLiu, Fugui et al. | 2016
- 1
-
Experimental Investigation of AC Loss Characteristics of Stacked HTS Tapes in an Iron CoreOgawa, Jun et al. | 2016
- 1
-
Magnetic Field Quality Evaluation of a 20-T Cryogen-Free Superconducting Magnet With a Bi2223 InsertAwaji, Satoshi / Oguro, Hidetoshi / Watanabe, Kazuo et al. | 2016
- 1
-
Influence of Edge Geometry on the Delamination Strength of REBCO CC Tapes Using Anvil Test MethodGorospe, Alking et al. | 2016
- 1
-
Study of Method of Measuring and Determining HTS Coil's Critical Current With $V$– $I$ Properties Between Different Parts of the CoilLi Liyi, / Han Zhengnan, / Cao Jiwei, et al. | 2016
- 1
-
A New Partitioned-Rotor Flux-Switching Permanent Magnet Motor With High Torque Density and Improved Magnet UtilizationXiang, Zixuan et al. | 2016
- 1
-
Protection Heater Design Validation for the LARP Magnets Using Thermal ImagingMarchevsky, M et al. | 2016
- 1
-
New Method for Quick Decay of Shielding Current in REBCO Superconducting CoilsIwakuma, M. / Tsukigi, Y. / Nabekura, K. et al. | 2016
- 1
-
Operational Characteristics of HTS Coils With Flux Diverters in Semipersistent Mode Under Alternating Magnetic FieldYoung Gun Park, / Woo Seung Lee, / Jeyull Lee, et al. | 2016
- 1
-
Performance of Conduction Cooled Splittable Superconducting Magnet Package for Linear AcceleratorsKashikhin, Vladimir / Andreev, Nikolai / Cheban, Sergey et al. | 2016
- 1
-
Upgrade of the NHMFL Cryogenic System and the Index Heating Test Results on the 45-T HybridHongyu Bai, / Kynoch, John G. / Hannahs, Scott T. et al. | 2016
- 1
-
Mechanical Qualification of the Support Structure for MQXF, the Nb3Sn Low- $\beta$ Quadrupole for the High Luminosity LHCJuchno, M. / Ambrosio, G. / Anerella, M. et al. | 2016
- 1
-
Development of the Superferric Sextupole Corrector Magnet for the LHC Luminosity UpgradeVolpini, G et al. | 2016
- 1
-
Effect of Applied Pure Bending Strain on Critical Current for CuNb/Nb3Sn Superconducting WiresOmura, T et al. | 2016
- 1
-
Study on Protection Coordination of a Flux-Lock-Type Superconducting Fault Current Limiter Using SwitchesKim, Jin-Seok et al. | 2016
- 1
-
Thermal and Mechanical Design of Error Field Correction Coil for JT-60SAMurakami, H. / Matsunaga, G. / Takechi, M. et al. | 2016
- 1
-
Development of Aluminum-Stabilized Superconducting Cables for the Mu2e Detector SolenoidLombardo, V et al. | 2016
- 1
-
Results of the Magnetic Measurements of the Superconducting Magnets for the European XFELBrueck, H. / Duda, M. / Bandelmann, R. et al. | 2016
- 1
-
Table of Contents| 2016
- 1
-
Status of the ITER Conductors in ChinaYu Wu, / Jing-Gang Qin, / Bo Liu, et al. | 2016
- 1
-
Concept Design of a Superconducting Impulse Transformer Using YBCO TapesSheng, J et al. | 2016
- 1
-
Thermal Stability of a Quasi-Isotropic Strand Made From Coated ConductorsLi, Tingting et al. | 2016
- 1
-
Motor Design and Characteristics Comparison of Outer-Rotor-Type BLDC Motor and BLAC Motor Based on Numerical AnalysisTae-Yong Lee, / Myung-Ki Seo, / Yong-Jae Kim, et al. | 2016
- 1
-
16 T Nb3Sn Racetrack Model Coil Test ResultPerez, J. C. / Bajas, H. / Bajko, M. et al. | 2016
- 1
-
Development of a Superconducting Magnet for a Compact Cyclotron for Radioisotope ProductionGarcia-Tabares, Luis / Abramian, Pablo / Calero, Jesus et al. | 2016
- 1
-
Test Results of the CLIC Damping Wiggler PrototypeBragin, Alexey V. / Bernhard, Axel / Casalbuoni, Sara et al. | 2016
- 1
-
Residual Magnetic Field Inside the Superconducting RF Cavity ShieldMasuzawa, Mika / Tsuchiya, Kiyosumi / Terashima, Akio et al. | 2016
- 1
-
Superconducting Magnet Systems in Tokamak Engineering and OptimizationPortone, A. / D'Amico, G. / Reccia, L. et al. | 2016
- 1
-
Design and Manufacturing of a 45 kA at 10 T REBCO-CORC Cable-in-Conduit Conductor for Large-Scale MagnetsMulder, Tim / Dudarev, Alexey / Mentink, Matthias et al. | 2016
- 1
-
R&D Project on HTS Magnets for Ultrahigh-Field MRI SystemsTosaka, Taizo / Miyazaki, Hiroshi / Iwai, Sadanori et al. | 2016
- 1
-
AC and Mechanical Loss Analysis of the ITER PF RF SULTAN SamplesLelekhov, Sergey A. / Bruzzone, Pierluigi / Stepanov, Boris et al. | 2016
- 1
-
Construction of Cryostat Components for the CHMFL Hybrid Magnet Superconducting OutsertChen, W. G. / Huang, P. C. / Tan, Y. F. et al. | 2016
- 1
-
Verification of Method for Calculating Heat in a Cryocooled BSCCO Coil During EnergizationMiyazoe, A. / Aoki, M. / Ando, R. et al. | 2016
- 1
-
Efficient Calculation Method of the Critical Current of Nested High-Field MagnetsMyunghwan Ku, / Jugyeong Park, / Heejoon Lee, et al. | 2016
- 1
-
Evaluation of Temperature Dependence of Magnetic Field Distributions of Bulk Superconductor AnnuliTomita, M. / Fukumoto, Y. / Ishihara, A. et al. | 2016
- 1
-
Tools Used at CEA for Designing the DEMO Toroidal Field Coils Winding PackTorre, A. / Ciazynski, D. / Hertout, P. et al. | 2016
- 1
-
Decontamination of Cesium From Contaminated Water Using a Selective Adsorbent and Magnetic SeparationHee-Won Kwon, / JeeEun Kim, / Dong-Woo Ha, et al. | 2016
- 1
-
Progress in Europe of the Procurement of the EU ITER TF CoilsBonito Oliva, A. / Barbero Soto, E. / Batista, R. et al. | 2016
- 1
-
Electromagnetic Study of a Round Coil Superferric MagnetVolpini, Giovanni / Rysti, Juho / Statera, Marco et al. | 2016
- 1
-
A Theoretical Design Approach for Passive Shimming of a Magic-Angle-Spinning NMR MagnetLi, Frank X. / Voccio, John P. / Sammartino, Michael et al. | 2016
- 1
-
Commissioning of the Cold Test Facility for the JT-60SA Tokamak Toroidal Field CoilsMaksoud, Walid Abdel / Allard, Jerome / Bargueden, Patrick et al. | 2016
- 1
-
Superconducting Power Supply for the KEDR Main Superconducting SolenoidKarpov, Sergey V. / Ruban, Alexander A. et al. | 2016
- 1
-
Reduction of Screening-Current-Induced Fields in an HTS Tape Winding Using Toroidal Arrangement of Shaking CoilKajikawa, Kazuhiro / Okabe, Yuma et al. | 2016
- 1
-
ITER TF Magnet System Analyses in Faulted ConditionsD'Amico, Gabriele / Reccia, Luigi / Portone, Alfredo et al. | 2016
- 1
-
Water-Cooled Resistive Magnets at CHMFLGao, B. J. / Ding, L. R. / Wang, Z. J. et al. | 2016
- 1
-
Cogging Torque Reduction of a Hybrid Axial Field Flux-Switching Permanent-Magnet Machine With Three MethodsDa Xu, / Mingyao Lin, / Xinghe Fu, et al. | 2016
- 1
-
Second-Generation Coil Design of the Nb3Sn low- $\beta$ Quadrupole for the High Luminosity LHCIzquierdo Bermudez, S. / Ambrosio, G. / Ballarino, A. et al. | 2016
- 1
-
Study of the Pulsed Field Magnetization Strategy for the Superconducting RotorZhen Huang, / Ruiz, H. S. / Yujia Zhai, et al. | 2016
- 1
-
Design, Construction, and Testing of a Large-Aperture High-Field HTS SMES CoilGupta, R. / Anerella, M. / Joshi, P. et al. | 2016
- 1
-
Frequency-Dependence and Anisotropy of AC Losses of Bi2223/Ag and YBCO-Coated ConductorsGuangxi Li, / Hongwei Liu, / Yinshun Wang, et al. | 2016
- 1
-
Simulation and Experimental Demonstration of a Large-Scale HTS AC Induction Furnace for Practical DesignChoi, J. / Kim, S. K. / Kim, S. et al. | 2016
- 1
-
Rotational Core Loss of Silicon Steel Laminations Based on Three-Dimensional Magnetic Properties MeasurementYongjian Li, / Lei Cao, / Changgeng Zhang, et al. | 2016
- 1
-
Design Considerations of PM Transverse Flux Machines With Soft Magnetic Composite CoresChengcheng Liu, / Jianguo Zhu, / Youhua Wang, et al. | 2016
- 1
-
Three-Dimensional Structural Analysis for Crystal Defects in Phase-Transformed Nb3AlBanno, Nobuya / Takeuchi, Takao / Kitaguchi, Hitoshi et al. | 2016
- 1
-
Analyses on the Cooling Performance of the CPMU Magnetic Structure at SSRFJian Wang, / Yiyong Liu, / Shuhua Wang, et al. | 2016
- 1
-
Longitudinal Gradient Dipole Magnet Prototype for APS at ANLKashikhin, V. S. / Borland, M. / Chlachidze, G. et al. | 2016
- 1
-
Analysis of the Thermal Stability of Superconducting Windings Using a Core Cable With YBCO-Coated ConductorsShanshan Fu, / Ming Qiu, / Hongjie Zhang, et al. | 2016
- 1
-
Test of an Original Superconducting Synchronous Machine Based on Magnetic ShieldingAlhasan, Rada / Lubin, Thierry / Douine, Bruno et al. | 2016
- 1
-
Cryogenic Tension Response of Monel Sheath MgB2 Superconducting WiresCanjie Xin, / Mingzhi Guan, / Xingzhe Wang, et al. | 2016
- 1
-
Finite-Element Model-Based Design Synthesis of Axial Flux PMBLDC MotorsFasil, M. / Mijatovic, N. / Jensen, B. B. et al. | 2016
- 1
-
Design of a High- $T_{\text{c}}$ Superconductive Maglev Flywheel System at 100-kW LevelWei Liu, / Dong Kang, / Chengning Zhang, et al. | 2016
- 1
-
Discharge Voltage Effects on High-$\text{T}_{C}$ Superconducting Tapes With Respect to Tensile StressSeokho Nam, / Woo Seung Lee, / Hongseok Lee, et al. | 2016
- 1
-
Design and Development of a Cryogen-Free Superconducting Prototype Generator With YBCO Field WindingsJiang, Yudong et al. | 2016
- 1
-
Propulsion Characteristics Using Pinned Flux of the HTS in the Permanent Magnet–HTS Hybrid Magnetically Levitated Conveyance SystemSumida, Takuro / Kamitani, Yuuki / Yamada, Naoki et al. | 2016
- 1
-
High-Resolution Magnetic Field Mapping System With an NMR ProbeLi, Frank X et al. | 2016
- 1
-
Design Study of Main Dipole Magnets for Korea Heavy Ion Medical Accelerator SynchrotronKim, Hyun Wook et al. | 2016
- 1
-
Design Study of a 250 MeV Isochronous Cyclotron for Proton TherapyKim, Hyun Wook et al. | 2016
- 1
-
A Post-Assembly Magnetization Method for a Line-Start Permanent-Magnet MotorFu, W. N et al. | 2016
- 1
-
Optimization Design of Bearingless Permanent-Magnet Slice MotorZhu, Huangqiu et al. | 2016
- 1
-
Magnet Design of an 800 MeV High Power Proton CyclotronYang, Jianjun et al. | 2016
- 1
-
Investigation of Flux-Coupling Type Superconducting Fault Current Limiter With Multiple Parallel BranchesQiu, Qingquan et al. | 2016
- 1
-
1.5 T Cryogen Free Superconducting Magnet for Dedicated MRIRybakov, Alexander et al. | 2016
- 1
-
No-Load Analysis of PMLSM With Halbach Array and PM Overhang Based on Three-Dimensional Analytical MethodKoo, Min-Mo et al. | 2016
- 1
-
Localization of Quenches and Mechanical Disturbances in the Mu2e Transport Solenoid Prototype Using Acoustic Emission TechniqueMarchevsky, M et al. | 2016
- 1
-
A Permanent-Magnet Array to Maintain 3He Gas Polarization Inside a Glass Vessel for Applications in High-Energy Laser PhysicsSoltner, Helmut / Buscher, Markus / Burgmer, Peter et al. | 2016
- 1
-
Design Considerations of Superconducting Wireless Power Transfer for Electric Vehicle at Different Inserted ResonatorsChung, Yoon Do et al. | 2016
- 1
-
Effective Control Method of the Active Damper System Against the Multidirectional Vibration in the Superconducting Magnetically Levitated BogieOkubo, Takaaki et al. | 2016
- 1
-
Development of a 200-mm Short Model of Beam Separation Dipole for HL-LHC UpgradeEnomoto, S et al. | 2016
- 1
-
Investigation of HTS Tape Stacks for Levitation ApplicationsOsipov, Maxim et al. | 2016
- 1
-
Development of Large-Current Indirectly Cooled Radiation-Resistant MagnetsTakahashi, H et al. | 2016
- 1
-
Experimental and Numerical Study of a DC Induction Heater Prototype With an Adjustable Air Gap StructureMa, J et al. | 2016
- 1
-
Quench Protection Study of the Updated MQXF for the LHC Luminosity Upgrade (HiLumi LHC)Marinozzi, Vittorio / Ambrosio, Giorgio / Ferracin, Paolo et al. | 2016
- 1
-
Numerical Study on the Quench Process of Superconducting Solenoid Magnets Protected Using Quench-BackGuo, X. L et al. | 2016
- 1
-
Experimental Investigation on 100 A-Class PCL for DC HTS DevicesChen, Guixin et al. | 2016
- 1
-
Iseult/INUMAC 11.7-T MRI Assembly StatusSchild, T et al. | 2016
- 1
-
Control System Design and Implementation of In-Vacuum Undulators for Taiwan Photon SourceWu, Chun-Yi et al. | 2016
- 1
-
Characteristics of Compensation for Fluctuating Output Power of a Solar Power Generator in a Hybrid Energy Storage System Using a Bi2223 SMES Coil Cooled by Thermosiphon With Liquid HydrogenZhang, Z et al. | 2016
- 1
-
Nb3Sn RRP Strand and Rutherford Cable Development for a 15 T Dipole DemonstratorBarzi, E. / Andreev, N. / Li, P. et al. | 2016
- 1
-
Study of Fault Conditions During Heat Treatment of Nb3Sn StrandTan, Yunfei et al. | 2016
- 1
-
Performance Analysis of a Double-Salient Permanent-Magnet Double-Rotor Motor Using Electromagnetic-Thermal Coupling MethodChen, Yunyun et al. | 2016
- 1
-
Design of IPMSM Applying V-Shape Skew Considering Axial Force Distribution and Performance Characteristics According to the Rotating DirectionPark, Gyeong-Jae et al. | 2016
- 1
-
Joule Losses in the ITER Cold Structures During Plasma TransientsCau, F et al. | 2016
- 1
-
Development of a Cyclotron MagnetYao, Q. G et al. | 2016
- 1
-
An Adaptive Control Strategy for Long-Pulse Magnet System With Low-Ripple Flat-Top Magnetic FieldYuan, Yang et al. | 2016
- 1
-
$I_{c}$ –Strain Performance of $RE\text{BCO}$ Coated-Conductor Tapes Under Low Magnetic FieldShin, Hyung-Seop et al. | 2016
- 1
-
Estimating the Operating Cost of Superconducting Magnet Systems at Various Operating TemperaturesGreen, M. A et al. | 2016
- 1
-
Influence of Parameters on the Simulation of HTS Bulks Magnetized by Pulsed Field MagnetizationShengnan Zou, / Zermeno, Victor M. R. / Grilli, Francesco et al. | 2016
- 1
-
SMES/Battery Hybrid Energy Storage System for Electric BusesJianwei Li, / Min Zhang, / Qingqing Yang, et al. | 2016
- 1
-
Economic Feasibility Study of an HTS DC Induction FurnaceChoi, J. / Go, B. S. / Kim, S. K. et al. | 2016
- 1
-
Consolidation of the LHC Superconducting Magnets and CircuitsTock, J. Ph / Atieh, S. / Bodart, D. et al. | 2016
- 1
-
Removal of Ammonia Nitrogen From Water by Magnetic Zeolite and High-Gradient Magnetic SeparationSugawara, T. / Matsuura, Y. / Anzai, T. et al. | 2016
- 1
-
Design and Heat Load Analysis of a 12 MW HTS Wind Power Generator Module Employing a Brushless HTS ExciterSung, H. J. / Badcock, R. A. / Jiang, Z. et al. | 2016
- 1
-
Design and Magnetic Field Analyses of Spiral Sector Magnet in an FFAG Accelerator for Carbon Cancer TherapySaka, Yosuke / Tominaga, Naoki / Sogabe, Yusuke et al. | 2016
- 1
-
Impact of SFCL on the Four Types of HVDC Circuit Breakers by SimulationJong-Geon Lee, / Khan, Umer Amir / Ho-Yun Lee, et al. | 2016
- 1
-
Thermal Network Model for HTS Cable Systems and Components Cooled by Helium GasGraber, Lukas / Jin-geun Kim, / Kim, Chul H. et al. | 2016
- 1
-
Test Results of the LARP Nb3Sn Quadrupole HQ03aDiMarco, J. / Ambrosio, G. / Anerella, M. et al. | 2016
- 1
-
Impact of 154-kV HTS Cable to Protection Systems of the Power Grid in South KoreaSeung Ryul Lee, / Jong-Joo Lee, / Jaeyoung Yoon, et al. | 2016
- 1
-
Status of the EuCARD 5.4-T REBCO Dipole MagnetBorgnolutti, F. / Durante, M. / Debray, F. et al. | 2016
- 1
-
The Study of Synchrotron Quadrupole in HIMMYao, Q. G. / Zhang, X. / Yang, J. et al. | 2016
- 1
-
Design of a New Superconducting Magnet System for High Strength Minimum-B Fields for ECRISXie, D. Z. / Benitez, J. Y. / Hodgkinson, A. et al. | 2016
- 1
-
Magnetization and Demagnetization Studies of an HTS Bulk in an Iron CoreBerger, Kevin / Gony, Bashar / Douine, Bruno et al. | 2016
- 1
-
A Study on the Optimization of an HTS Quadrupole Magnet System for a Heavy Ion Accelerator Through Evolution StrategyZhan Zhang, / Sangjin Lee, / Hyun Chul Jo, et al. | 2016
- 1
-
The Impact of Protection Heater Delays Distribution on the Hotspot Temperature in a High-Field Accelerator MagnetSalmi, T. / Stenvall, A. et al. | 2016
- 1
-
Conceptual Design Improvement of a Toroidal Field Coil for EU DEMO Using High-Temperature SuperconductorsHeller, R. / Gade, P. V. / Fietz, W. H. et al. | 2016
- 1
-
Design of Bearingless Flux-Switching Permanent-Magnet MotorHui Li, / Huangqiu Zhu, et al. | 2016
- 1
-
Applying Model Predictive Control to SMES System in Microgrids for Eddy Current Losses ReductionThai-Thanh Nguyen, / Hyeong-Jun Yoo, / Hak-Man Kim, et al. | 2016
- 1
-
Radiation-Resistant Magnets for J-PARCTanaka, K. H. / Hirose, E. / Takahashi, H. et al. | 2016
- 1
-
Three-Dimensional Finite-Element Analysis of Terminations for Gaseous-Helium-Cooled High-Temperature Superconducting Power CablesSuttell, Nick / Kim, Chul H. / Ordonez, Juan et al. | 2016
- 1
-
LHC Normal Conducting Magnets Toward HL-LHC and Beyond: Life Span Evaluations, Corrective Actions, and Future UpgradesFessia, P. / Mariani, N. / Cerutti, F. et al. | 2016
- 1
-
Modeling of a Switched Reluctance Motor Under Stator Winding Fault ConditionChen, H. / Han, G. / Yan, W. et al. | 2016
- 1
-
Study of AC Loss and Temperature Distribution of a BSCCO Coil Cooled in Liquid Nitrogen or Using a CryocoolerLingfeng Lai, / Timing Qu, / Chen Gu, et al. | 2016
- 1
-
Magnetic Field Stability Analysis on No-Insulation and Turn-to-Turn Soldered HTS Magnets Under Sinusoidal Noise OperationWoo Seung Lee, / Young Gun Park, / Jinsub Kim, et al. | 2016
- 1
-
European Nb 3Sn Superconducting Strand Production and Characterization for ITER TF Coil ConductorBoutboul, T. / Abaecherli, V. / Berger, G. et al. | 2016
- 1
-
Optimal Design of Reformed Auxiliary Teeth for Reducing End Detent Force of Stationary Discontinuous Armature PMLSMKim, Sung-Jin et al. | 2016
- 1
-
Charge-Discharge and Thermal-Electrical Characteristics of GdBCO Coils Wound With Various Types of Grease as an Insulation MaterialKim, Seong-Gyeom et al. | 2016
- 1
-
Cold Storage and Release Characteristics of a Thermal Battery Unit Using Solid Nitrogen and Solid Nitrogen Impregnated in Metal FoamZhang, P et al. | 2016
- 1
-
Quench Protection Studies of the 11-T Nb3Sn Dipole for the LHC UpgradeIzquierdo Bermudez, S et al. | 2016
- 1
-
Testing of the Superconducting Magnets for the FAIR ProjectMierau, Anna et al. | 2016
- 1
-
Magnetic Separation for Recovering Ni Compounds From Plating Waste With Use of HTS Bulk MagnetsOka, T. / Takayanagi, Y. / Machida, S. et al. | 2016
- 1
-
Analysis on Magnetizing Characteristics Due to Peak Fault Current Limiting Operation of a Modified Flux-Lock-Type SFCL With Two Magnetic PathsKo, Seok-Cheol et al. | 2016
- 1
-
Ti-MgB 2 Conductor for Superconducting Space MagnetsMusenich, Riccardo et al. | 2016
- 1
-
Application and Development of a Method to Shim the Isochronous Field in Small CyclotronsMing Li, / Junqing Zhong, / Tao Cui, et al. | 2016
- 1
-
Development of Non-Contact Levitated Rotating Machine Using HTS Bulks and Permanent MagnetsKim, S. B et al. | 2016
- 1
-
Effect of Induced Current on the Flow Stress in the Electromagnetic Ring ExpansionHuang, Lantao et al. | 2016
- 1
-
Closed-Loop Distribution Network by a Midvoltage Flexible HTS DC SystemXianglong Zhang, / Lin Cheng, / Lingyu Gao, et al. | 2016
- 1
-
Design and Experimental Validation of a Pulsed Electromagnetic Sheet Shearing SystemHuang, Yujie et al. | 2016
- 1
-
Characteristic Analysis of Tubular-Type Permanent-Magnet Linear Magnetic Coupling Based on Analytical Magnetic Field CalculationsJeong-Man Kim, / Jang-Young Choi, / Min-Mo Koo, et al. | 2016
- 1
-
Design and Analysis of Power Supplies for the First 100-T Nondestructive Magnet at the WHMFCDing, Hongfa et al. | 2016
- 1
-
Role and Impact of the Eddy Current Shield in the LNCMI-G Hybrid MagnetFazilleau, Philippe et al. | 2016
- 1
-
Design Optimization of a Fluxgate Current Sensor With Low InterferenceYang, Xiaoguang et al. | 2016
- 1
-
A Full-Pitched Flux-Switching Permanent-Magnet MotorDu, Yi et al. | 2016
- 1
-
Increase of Stability Margin in Embedded DC Electric Grid With Superconducting StabilizerHuang, Guan Bin et al. | 2016
- 1
-
Finite-Element Analysis of Transverse Compressive and Thermal Loads on Nb3Sn Wires With VoidsZhai, Y et al. | 2016
- 1
-
Inductance Compensation for the Quench Detection of the KSTAR CS CoilChu, Yong et al. | 2016
- 1
-
Design and Performance of Power Supplies for Superconductor Insertion Devices at TLS 1.5-GeV RingChien, Y. C et al. | 2016
- 1
-
Analysis of Output Characteristic Model of Magnetostrictive Displacement Sensor Under a Helical Magnetic Field and StressZhang, Luyu et al. | 2016
- 1
-
Design of a Hybrid Multiperiod Robinson Wiggler for TPS Light SourceHuang, C. W et al. | 2016
- 1
-
Design of an Integrated Mechanical Fatigue Test Apparatus for S-Bend BusbarZhou, Nengtao et al. | 2016
- 1
-
Study on Quench Protection of Coil Wound of Bi/Ag-Sheathed WireSasaki, E et al. | 2016
- 1
-
Experimental Results of Simplified Balance Bridges for the KSTAR Quench Detection SystemYonekawa, Hirofumi et al. | 2016
- 1
-
Development of a Desktop-Type Superconducting Bulk MagnetYokoyama, K. / Kulawansha, Eranda / Zhao Yuanding, et al. | 2016
- 1
-
Overview of Torus Magnet Coil Production at Fermilab for the Jefferson Lab 12-GeV Hall B UpgradeKrave, S et al. | 2016
- 1
-
Load Test Analysis of High-Temperature Superconducting Synchronous MotorsBaik, Seung-Kyu et al. | 2016
- 1
-
Electromagnetic Analysis on Two Structures of Bilateral Switched Reluctance Linear MotorChen, H et al. | 2016
- 1
-
Manufacture and Cryogenic Experiment of 9.4-T MRI Full-Size Dummy CoilsJunsheng Cheng, / Lankai Li, / Kun Chang, et al. | 2016
- 1
-
Local Magnetization Measurements on GdBCO Coated Conductors With Narrow Strands: A Comparative StudyPark, Hee Yeon et al. | 2016
- 1
-
Experimental Testing and Development of Improved Modelling for Multistrand Resistive SFCLPei, Xiaoze et al. | 2016
- 1
-
Evaluation of Magnetic Field Distribution by Screening Current in Multiple REBCO CoilsMochida, Ayumu et al. | 2016
- 1
-
Design and Fabrication of a Catheter Magnetic Navigation System for Cardiac ArrhythmiasLiu, Jianhua et al. | 2016
- 1
-
Tensile Behavior Analysis of the Nb3Sn Superconducting Strand With Damage of the FilamentsWang, Xu et al. | 2016
- 1
-
High-Performance Pulsed Magnetic Fields at the Wuhan National High Magnetic Field CenterLi, L. / Lv, Y. L. / Xiao, H. X. et al. | 2016
- 1
-
Effect of Resistive Metal Cladding of HTS Tape on the Characteristic of No-Insulation CoilJaemin Kim, / Sangwon Yoon, / Kyekun Cheon, et al. | 2016
- 1
-
Mitigation of Demagnetization of Bulk Superconductors by Time-Varying External Magnetic FieldsJin Zou, / Ainslie, Mark D. / Di Hu, et al. | 2016
- 1
-
$I_{{c}}$ Response With High Magnetic Field, Low Temperature, and Uniaxial Strain in REBCO Coated Conductor TapesHyung, S. S. / Dedicatoria, M. J. / Gorospe, A. et al. | 2016
- 1
-
The Magnetic Relaxation of MgB 2 Thin Films Grown by Hybrid Physical–Chemical Vapor DepositionSong, K. J. / Kang, W. N. / Park, C. et al. | 2016
- 1
-
Time–Frequency-Based Insulation Diagnostic Technique of High-Temperature Superconducting Cable SystemsGeon Seok Lee, / Gu-Young Kwon, / Su Sik Bang, et al. | 2016
- 1
-
Development of a Prototype Winding Machine for Helical Coils Using High-Temperature Superconducting TapesKimura, Yusuke / Kamada, Hiroharu / Nomura, Shinichi et al. | 2016
- 1
-
Experience in PF1 Dummy Pancake Manufacturing on the Mobile Facility for Winding and VPI of Large-Scale Superconductive MagnetsBelyakov, Valery / Bursikov, Andrey / Klimchenko, Yury et al. | 2016
- 1
-
Electromagnetic Field Analysis Coupled Model of Fluid–Structure–Thermal Simulation of Power Converter for Switched Reluctance MachineChen, H. / Xu, Y. et al. | 2016
- 1
-
Modeling and Simulation of Thermomagnetic Materials for Thermally Actuated Magnetization Flux Pumping MethodZhai, Y. / Matsuda, K. / Coombs, T. A. et al. | 2016
- 1
-
Overview of Progress on the EU DEMO Reactor Magnet System DesignZani, L. / Bayer, C. M. / Biancolini, M. E. et al. | 2016
- 1
-
Cooling and Operation of the MSU Cyclotron Gas-Stopper MagnetGreen, M. A. / Magsig, C. / Bollen, G. et al. | 2016
- 1
-
Mechanical Properties of Preliminary Designed Insulation for CFETR CSMCHuan Jin, / Yu Wu, / Feng Long, et al. | 2016
- 1
-
Field Measurements of Magnets for Modern SR Sources and FELOkunev, Ivan / Batrakov, Alexandr / Kobets, Valeriy et al. | 2016
- 1
-
Flux Pinning Properties in BaHfO3-Doped $\mbox{SmBa}_{2}\mbox{Cu}_{3}\mbox{O}_{y}$ Films on Metallic Substrates Fabricated With Low Temperature GrowthMiura, S. / Yoshida, Y. / Ichino, Y. et al. | 2016
- 1
-
A Study on the Design of Full-LTS 18-GHz ECR Ion Source for Heavy Ion AcceleratorShaoqing Wei, / Sangjin Lee, / Sukjin Choi, et al. | 2016
- 1
-
Design and Evaluation of Joint Resistance in SSC Rutherford-Type Cable Splices for Torus Magnet for the Jefferson Lab 12-GeV UpgradeGhoshal, Probir K. / Fair, Ruben J. / Hampshire, Damian et al. | 2016
- 1
-
Fabrication and Testing of the 20 kA Binary Current Leads for the NHMFL Series-Connected Hybrid MagnetMarshall, William S. / Hongyu Bai, / Bird, Mark D. et al. | 2016
- 1
-
Transient Behaviors of No-Insulation REBCO Pancake Coil During Local Normal-State TransitionIkeda, Aika / Oki, Takahiro / Tao Wang, et al. | 2016
- 1
-
Design of Cryogenic Cooling System of a 35-kV/3.5-MVA Single-Phase HTS-Controllable ReactorShifeng Shen, / Yuejin Tang, / Li Ren, et al. | 2016
- 1
-
Effect of the Bending Strain on the Inhomogeneity of Critical Current for YBCO Coated ConductorsYunpeng Zhu, / Liyuan Liu, / Gang Wang, et al. | 2016
- 1
-
Experimental Analysis of Thermally and Magnetically Triggered Switch for High-Tc Superconducting Power Converting SystemJeyull Lee, / Junseong Kim, / Jinsub Kim, et al. | 2016
- 1
-
Use of Permanent Magnets in Multiple Projects at CERNThonet, P. A. et al. | 2016
- 1
-
Test Results of Gas-Cooled Prototype Magnet for In-Flight Fragment SeparatorDongmin Kim, / Seokho Kim, / Myung-Hwan Sohn, et al. | 2016
- 1
-
AC Loss Characteristics of HTS Wires Carrying Currents With Different WaveformsZhao, A. F. / Li, X. F. / Wu, W. et al. | 2016
- 1
-
Optimization of the Pole Shape for Corrector Quadrupole Magnet in the J-PARC 3-GeV RCSTani, N. / Watanabe, Y. / Hotchi, H. et al. | 2016
- 1
-
Summary of the Persistent Current Effect Measurements in Nb3Sn and NbTi Accelerator Magnets at FermilabVelev, G. V et al. | 2016
- 1
-
Review of Scientific Results Obtained During Production of ITER TF and PF Conductors in RussiaKaverin, D. S et al. | 2016
- 1
-
First Implementation of the CLIQ Quench Protection System on a 14-m-Long Full-Scale LHC Dipole MagnetDatskov, V. I et al. | 2016
- 1
-
Two-Dimensional and Three-Dimensional Mechanical Analyses of the Superconducting Outsert of the LNCMI Hybrid MagnetPes, C et al. | 2016
- 1
-
Construction and Test of MgB2 Mock-Up Coils for LIQHYSMESHornung, Frank et al. | 2016
- 1
-
Design and Fabrication of a Conduction-Cooled Superconducting Magnet for Hall Sensor CalibrationHu, Xinning et al. | 2016
- 1
-
Annealing Conditions of SCO Buffer Layer via Slot-Die TechniqueLei, M et al. | 2016
- 1
-
Cooling Performance and Thermal Characteristics of No-Insulation GdBCO Magnet Cooled by a Mixed Cryogen Cooling SystemChoi, Yoon Hyuck et al. | 2016
- 1
-
Magnet Design Considerations for Fusion Nuclear Science FacilityZhai, Y et al. | 2016
- 1
-
Numerical and Experimental Analysis of CSR of Transformer Type for Bidirectional Reactive Power CompensationYang, Guang et al. | 2016
- 1
-
Flux Pinning Properties in BaHfO3-Doped \mbox\mbox\mbox Films on Metallic Substrates Fabricated With Low Temperature GrowthMiura, S et al. | 2016
- 1
-
Geometrical Behavior of Nb3Sn Rutherford Cables During Heat TreatmentDurante, Maria et al. | 2016
- 1
-
Strain Effect on Critical Current Degradation in Bi-Based Superconducting Tapes With Different Deformation ModesGao, Peifeng et al. | 2016
- 1
-
Application of Triple-Coil System for Improving Deformation Depth of Tube in Electromagnetic FormingZhang, Xiao et al. | 2016
- 1
-
Experimental and Analytical Studies on Variable Speed Control of High-Temperature Superconducting Induction/Synchronous MotorMuranaka, Keitaro et al. | 2016
- 1
-
Research on Magnetic Properties of Nd(Pr)FeB Magnet for Cryogenic Permanent-Magnet Undulator of SSRFHe, Y. Z et al. | 2016
- 1
-
The Main Dipole Magnets Design and Test of HIMM ProjectZhang, Xiaoying et al. | 2016
- 1
-
Development of a MW-Class 2G HTS Ship Propulsion MotorMoon, Heejong et al. | 2016
- 1
-
Decay of Shielding Current in Stacked REBCO Superconducting TapesIwakuma, M et al. | 2016
- 1
-
Extra-Low-Voltage DC Power Supply for Large-Scale Superconducting Coil for Fusion DeviceChikaraishi, Hirotaka et al. | 2016
- 1
-
Transport Properties of CuNb/Nb3Sn Rutherford Coils With Various DiametersOguro, H et al. | 2016
- 1
-
Overview of the ITER Toroidal Field Magnet System IntegrationFoussat, A et al. | 2016
- 1
-
Design of a Superconducting Magnet for the LNS CyclotronRadovinsky, A. / Calabretta, L. / Minervini, J. et al. | 2016
- 1
-
Dynamic Experiment for the Magnetothermal Stability of a 110 kV/3 kA Cold Dielectric High-Temperature Superconducting Cable With an Impact of Fault Current in Power SystemJiahui Zhu, / Xiaodong Zheng, / Wei Liu, et al. | 2016
- 1
-
Transient Recording System for Power Supply and High Field Magnet Fault Analysis: Its Use for Magnet Aging Surveillance and Accident DiagnosisSala, Ph / Daversin, C. / Debray, F. et al. | 2016
- 1
-
Design, Fabrication, and Test of a High-Strength Uniform Pressure ActuatorZhangzhe Li, / Xiaotao Han, / Quanliang Cao, et al. | 2016
- 1
-
Development of Lambertson Magnet and Septum Magnets for Splitting 30-GeV Proton Beam in Hadron Experimental Facility at J-PARCMuto, Ryotaro / Agari, Keizo / Aoki, Kazuya et al. | 2016
- 1
-
Axially Movable Electromagnetic Forming System for Large-Scale Metallic SheetQi Xiong, / Quanliang Cao, / Xiaotao Han, et al. | 2016
- 1
-
A Long Charging Delay for a No-Insulation REBCO Layer-Wound Coil and Its Influence on Operation With Outer LTS CoilsYanagisawa, Kyoko / Iguchi, Seiya / Yi Xu, et al. | 2016
- 1
-
Decoupling Design of Z2 Superconducting Shim Coils for 9.4-T MRI Superconducting MagnetYi Li, / Qiuliang Wang, / Xuchen Zhu, et al. | 2016
- 1
-
Performance Analysis of Mass-Produced Nb3Sn Conductor for Central Solenoid in ITERNabara, Yoshihiro / Suwa, Tomone / Ozeki, Hidemasa et al. | 2016
- 1
-
Design and Qualification of Joints for ITER Magnet Busbar SystemIlyin, Yury / Chen-yu Gung, / Xinjie Wen, et al. | 2016
- 1
-
Analysis of ITER PF Coil Joint Design Under Reference Operating ScenarioIlyin, Yury / Rolando, Gabriella / Turck, Bernard et al. | 2016
- 1
-
Cogging Torque Optimization of Flux Memory Pole-Changing Permanent Magnet MachineDong Wang, / Heyun Lin, / Hui Yang, et al. | 2016