JOURNAL OF COMMERCIAL VEHICLES
Die Inhaltsverzeichnisse werden automatisch erzeugt und basieren auf den im Index des TIB-Portals verfügbaren Einzelnachweisen der enthaltenen Beiträge. Die Anzeige der Inhaltsverzeichnisse kann daher unvollständig oder lückenhaft sein.
Inhaltsverzeichnis
- 1
-
Evolution of Instrument Panels Made of PolypropyleneJuan, P. / Naughton, P. / Lee, R. et al. | 1998
- 8
-
Development of CHISSO NEWCON[TM] for Automotive useOkayama, C. / Akitaya, S. / Mori, K. et al. | 1998
- 14
-
Development of Soft TPEE CVJ BootMukaida, T. / Kojima, Y. / Shiraishi, M. et al. | 1998
- 22
-
Stamping Part Surface Quality Improvement Through Process OptimizationZhang, Z. T. / Pitt, G. / King, A. et al. | 1998
- 26
-
A Study on Uniformity of Pre-Applied Lubricants from Mill Application to Draw DieZaccone, D. C. / Elko, R. G. / Hogarth, D. J. et al. | 1998
- 35
-
Combination of Hydraulic Multipoint Cushion System and Segment-Elastic BlankholdersSiegert, K. / Hohnhaus, J. / Wagner, S. et al. | 1998
- 44
-
Prototype Draw Dies for Sheet Metal PartsSiegert, K. / Haller, B. et al. | 1998
- 56
-
Predicting the Forming Limit Diagram (FLD) for Sheet Metals with Planar AnisotropyZhu, X. H. / Majlessi, S. A. / Aifantis, E. C. et al. | 1998
- 65
-
Using Neural Network for Springback Minimization In a Channel Forming ProcessRuffini, R. / Cao, J. et al. | 1998
- 74
-
The Effect of Modeling Parameters and Bending on Two-Dimensional Sheet Metal Forming SimulationEsche, S. K. / Kinzel, G. L. et al. | 1998
- 86
-
A New Magnesium Alloy for Automotive Powertrain ApplicationsLuo, A. / Shinoda, T. et al. | 1998
- 95
-
Bolt-Load Retention Behavior of Die-Cast AZ91D and AE42 MagnesiumSohn, K. Y. / Yurko, J. A. / Jones, J. W. et al. | 1998
- 103
-
Study of Plastic Material Recovery from Automotive Shredder ResidueWinslow, G. R. / Liu, S. X. / Yester, S. G. et al. | 1998
- 110
-
Recyclability and Characterization of Co-Extruded Multilayer Fuel TanksEllis, T. S. / Laverty, J. J. / Lesinski, M. M. et al. | 1998
- 119
-
Polymer Additives as Mist Suppressants in Metalworking Fluids Part IIa: Preliminary Laboratory and Plant Studies - Water-Soluble FluidsKalhan, S. / Twining, S. / Denis, R. et al. | 1998
- 124
-
Lead-Free Solder for Automotive ElectronicsWhitten, G. et al. | 1998
- 131
-
First One-Piece, Injection-Molded Thermoplastic Front-Bumper System for a Light TruckRawson, J. / Staargaard, J. / Hedler, O. et al. | 1998
- 135
-
Integrated Energy-Management Systems: Market Trends, OEM Needs, and Business Opportunities for the Tier 1 CommunityGrosser, M. / Rawson, J. et al. | 1998
- 147
-
Requirements for P/M Stainless Steel Materials in Order to Meet Future Exhaust System Performance CriteriaLee, P. F. / Saxion, S. / Regan, G. et al. | 1998
- 153
-
The Effect of Nearly Full Theoretical Density on Critical Performance for Stainless Steel Powder MetalClase, S. M. / Sanderow, H. I. et al. | 1998
- 164
-
P/M Stainless Steels Applications in Automotive Exhaust SystemsCauston, R. J. / Mumau, C. / Cimino, T. M. et al. | 1998
- 171
-
Development of Powder Metal Stainless Steel Materials for Exhaust System ApplicationsShah, S. O. / McMillen, J. R. / Samal, P. K. et al. | 1998
- 181
-
Performance of Stainless Steel P/M Materials in Elevated Temperature ApplicationsHubbard, T. / Couchman, K. / Lall, C. et al. | 1998
- 194
-
The Development of a High-Speed, Steel-Based Sintered Material for High-Performance Exhaust Valve Seat InsertsKawata, H. / Hayashi, K. / Ishii, K. et al. | 1998
- 201
-
Process and Materials Development for Adherently Sprayed Valve Seats on Aluminum Engine HeadsPopoola, O. O. / Reatherford, L. V. / McCune, R. C. et al. | 1998
- 209
-
Powder Metal Alloys with High Contact Fatigue Properties: Application to Cam Lobes and Bucket Tappet ShimsTrasorras, J. R. L. / Dempsey, A. J. / Blanchard, P. et al. | 1998
- 217
-
Modified P/M Soft Magnetic Materials for Automotive ApplicationsFrayman, L. I. / Ryan, D. R. / Ryan, J. B. et al. | 1998
- 225
-
The Warm Compaction Process. Basics, Advantages and LimitationsFilippo Bocchini, G. et al. | 1998
- 237
-
Evolution of Plastics IP Technology Technical Feasibility of Integrated Modular IP SystemLorenzo, L. / Burr, S. / Chapman, D. et al. | 1998
- 247
-
Evaluation of Instrument Panel Designs for Cost of Manufacture and Environmental ImpactDewhurst, P. et al. | 1998
- 255
-
Quality Function Approach to Design and Optimization of Stamping Process: Application to an Industrial CaseLuet, D. / Duval, J. L. / Di Pasquale, E. et al. | 1998
- 261
-
Optimization of Tool Design of Plane Strain Punch Stretching TestHa, D. H. / Kim, Y. S. et al. | 1998
- 268
-
Evaluation of Tailor-Welded Blanks Through Technical Cost ModelingTrogolo, J. M. et al. | 1998
- 273
-
Metal Flow of a Tailored Blank in Square Cup Deep DrawingHayashi, H. / Pak, S.-W. / Usuda, M. et al. | 1998
- 280
-
Tubular Hydroforming: Correlation of Experimental and Simulation ResultsSrinivasan, T. M. / Shaw, J. R. / Thompson, K. et al. | 1998
- 287
-
Analytical and Experimental Examination of Tubular Hydroforming LimitsLiu, S.-D. / Meuleman, D. / Thompson, K. et al. | 1998
- 298
-
Tube Hydroforming: Dimensional Capability Analysis of a High-Volume Automotive Structural Component Production ProcessMorphy, G. et al. | 1998
- 308
-
Clean and Cost-Effective Dry Boundary Lubricants for Aluminum FormingErdemir, A. / Fenske, G. R. et al. | 1998
- 312
-
A New Paradigm for the Design of Safety Critical CastingsConley, J. G. / Moran, B. / Gray, J. et al. | 1998
- 327
-
Thixoforming of AluminumSiegert, K. / Leiber, R. et al. | 1998
- 335
-
Automotive Life Cycle Assessment: Overview, Metrics and ExamplesSullivan, J. L. / Costic, M. M. / Han, W. et al. | 1998
- 351
-
Life Cycle Value Assessment (LCVA) Comparison of Conventional Gasoline and Reformulated GasolineRaynolds, M. A. / Checkel, M. D. / Fraser, R. A. et al. | 1998
- 369
-
Life Cycle Assessment of a Transmission Case: Magnesium Versus AluminumReppe, P. / Keoleian, G. / Messick, R. et al. | 1998
- 378
-
Shredding Late Model Chrysler Vehicles, ASR Sample Collection and Characterization of ASRLiu, S. X. / Winslow, G. R. / Yester, S. et al. | 1998
- 391
-
On Determining the Relationship Between Vehicle Value and Interior NoisePozar, M. / Cook, H. E. et al. | 1998
- 402
-
High Surface Speed Turning and Boring of PM Carbon SteelPettersson, O. et al. | 1998
- 407
-
Drilling of Stainless Sintered SteelsKutsch, U. / Beiss, P. et al. | 1998
- 416
-
Machinability Characterization of P/M MaterialsChagnon, F. / Gagne, M. et al. | 1998
- 421
-
Notch Sensitivity and Fatigue in Austempered Ductile IronGundlach, R. B. / Semchyshen, M. / Whelan, E. P. et al. | 1998
- 436
-
ADI Crankshafts - An Appraisal of Their Production PotentialChatterley, T. C. / Murrell, P. et al. | 1998
- 454
-
Inelastic Behavior and Low Cycle Fatigue of Aluminum Alloy Subjected to Thermo-Mechanical LoadingTakahashi, T. / Koike, A. / Sasaki, K. et al. | 1998
- 462
-
An Application for Fatigue Damage Analysis Using Power Spectral Density from Road Durability EventsMorrill, J. H. / Achatz, T. / Khosrovaneh, A. et al. | 1998
- 469
-
Development of a Life Assessment Method for Bonded and Weld-Bonded Automotive StructuresHarris, J. A. / Martin, R. H. et al. | 1998
- 474
-
Dynamic Durability Analysis of Automotive StructuresHuang, L. / Agrawal, H. / Kurudiyara, P. et al. | 1998
- 481
-
On Multi-Axial Random Fatigue Load ModelingLeser, C. / Juneja, L. / Thangjitham, S. et al. | 1998
- 495
-
A Thermoviscoplastic FE Model for the Strain Prediction in High-Temperature, Thermal-Cycling Applications for Silicon Molybdenum Nodular Cast IronAnderson, D. H. / Bisaro, D. R. / Haan, D. M. et al. | 1998
- 502
-
Fretting Fatigue Analysis in Rapidly Solidified Powder Aluminum AlloyItou, Y. / Hotta, S. / Saruki, K. et al. | 1998
- 508
-
Effect of Composition, Particle Size, and Heat Treatment on the Mechanical Properties of AL-4.5 Wt.% Cu-Based Alumina Particulate-Reinforced CompositesSeleznev, M. L. / Seleznev, I. L. / Cornie, J. A. et al. | 1998
- 515
-
Increased Wetting of Saffil[TM] Reinforcement Preforms by the Addition of Bismuth to Aluminum AlloysPapworth, A. / Fox, P. et al. | 1998
- 520
-
Properties of Engine Bearings Lubricated with Low HTHS Viscosity OilOno, A. / Kurimoto, S. / Kawachi, T. et al. | 1998
- 529
-
Low Viscosity Functionalized Polymers - A New Approach for Adhesion to Non-Polar SubstratesMcNeal, K. M. et al. | 1998
- 532
-
Polyolefin Diol in Coatings for Thermoplastic PolyolefinsSt. Clair, D. J. et al. | 1998
- 541
-
Basecoats with Direct Adhesion to TPOKondos, C. A. / Kahle, C. F. et al. | 1998
- 545
-
Conductive TPOHelms, J. H. / Blais, E. J. et al. | 1998
- 554
-
Evaluation of Polar Conventional and Nonpolar Olefinic Paint Technologies in Thermoplastic OlefinsYu, T. C. et al. | 1998
- 570
-
Friction-Induced Paint Damage: An Objective Assessment of Three Coating SystemsRamamurthy, A. C. / Szczepaniak, E. / Mihora, D. J. et al. | 1998
- 576
-
2D/3D Painted TPO Fascia Testing to Mimic Real-World, Friction-Induced Damage by Cohesive and Delamination FailuresMihora, D. J. / Ramamurthy, A. C. / Venditto, V. A. et al. | 1998
- 585
-
Wear Performance of High-Performance Polymeric Bearing MaterialsGriffiths, I. / Kemmish, D. / Morgan, M. et al. | 1998
- 600
-
Accelerated Glass Reveal Molding TestFerris, T. / Finken, M. / Dziadzio, B. et al. | 1998
- 611
-
Injection Compression Molding of Long-Glass-Fiber-Reinforced PolypropyleneGottgetreu, S. R. et al. | 1998
- 619
-
Optimization of Vibration Weld Joint Strength for Plastic Air Intake ManifoldLee, C. S. / Kagan, V. / Knowlden, N. et al. | 1998
- 624
-
Fully Automated Dye-Penetrant Inspection of Automotive PartsAbend, K. et al. | 1998
- 630
-
Reliability of Electronic Control Units in Motor VehiclesPauli, B. / Meyna, A. et al. | 1998
- 638
-
Application Case Studies in Design for Manufacture for Convertible Top Vehicle SystemsArdayfio, D. / Dembsey, G. / Kreucher, N. et al. | 1998
- 647
-
Optimized Connecting Rods to Enable Higher Engine Performance and Cost ReductionRepgen, B. et al. | 1998
- 652
-
Attributes of Nonwovens in the Headliner Molding ProcessKitazawa, N. / Preininger, W. A. / Karasawa, N. et al. | 1998
- 656
-
Violins - A Modeling Tool for Layered MaterialsCoyette, J. P. / Coats, T. J. et al. | 1998
- 661
-
Utilization of Isocyanate-Based Binders in Recycling of Automotive Composite HeadlinersGebreselassie, G. M. / Wolf, H. / Sendijarevic, V. et al. | 1998
- 667
-
Currnet and Past Technologies for Headliners Including Acoustics, Recycling and SafetyDavies, B. A. et al. | 1998
- 673
-
High Strain Rate Deformation of High-Strength Sheet Steels for Automotive PartsMiura, K. / Takagi, S. / Hira, T. et al. | 1998
- 680
-
New Materials Technology for Achieving Both Crashworthiness and Weight Reduction Using Energy-Absorbing Steel with Higher Strain-Rate SensitivityNakanishi, E. / Tateno, H. / Hishida, Y. et al. | 1998
- 687
-
Application to Body Parts of High-Strength Steel Sheet Containing Large Volume Fraction of Retained AusteniteOjima, Y. / Shiroi, Y. / Taniguchi, Y. et al. | 1998
- 696
-
Effects of Oil Type, Weight and Storage Time on Formability of Galvannealed Sheet SteelsRangarajan, V. et al. | 1998
- 706
-
Developing High-Strength in a Deep Drawing Steel by a Post-Cold-Rolling Nitriding TreatmentLally, J. S. / Holla, H. A. et al. | 1998
- 716
-
Energy Absorption Capability of Composite Materials Applied to Automotive Crash Absorbers DesignCastejon, L. / Cuartero, J. / Clemente, R. et al. | 1998
- 726
-
Porous Elastic Behavior of Open-Cell FoamJung Hwa Hong / Lee, S. / Hong, J.-M. et al. | 1998
- 735
-
Polyurethane Safety Foam Performance Map for Material Selection and Design in Vehicle and Occupant Impact ProtectionPerry, M. J. / Schomer, D. R. / Lambach, J. L. et al. | 1998
- 743
-
A Constitutive Model for Polyurethane Foams with Strain-Rate and Temperature EffectsChou, C. C. / Song, G. S. / Zhao, Y. et al. | 1998
- 755
-
Scratch Resistance of Automotive Plastic CoatingsRyntz, R. A. / Abell, B. D. / Hermosillo, F. et al. | 1998
- 765
-
Durability of Painted Automotive Exteriors Subject to High-Pressure Water Jets: Simulation of Touch-Free Car Was EnvironmentsRamamurthy, A. C. / Buresh, G. / Jones, A. et al. | 1998
- 780
-
Scratching of Automotive OEM Clearcoats - Method and Media EffectsPotter, T. A. / Jacobs, P. B. / Engbert, T. et al. | 1998
- 787
-
Design and Implementation of Key-Life Tests for Painted Automotive Exteriors Subject to Tribological Loading: A Systems ApproachRamamurthy, A. C. / Whiting, G. et al. | 1998
- 821
-
Novel Methods for Characterizing the Mechanical Durability of Automobile Paint SystemsPickles, M. J. / Trezona, R. I. / Hutchings, I. M. et al. | 1998
- 829
-
Evaluation of Finesse/Polish of Automotive ClearcoatsJenkins, J. W. / Kane, K. M. et al. | 1998
- 834
-
Effects of Atomization on the Particle Size, Appearance, and Composition of Automotive OEM BasecoatsMiller, R. C. et al. | 1998
- 845
-
Toughening Mechanisms of Long-Fiber-Reinforced ThermoplasticsKim, H. C. et al. | 1998
- 850
-
SMC Glass Microspheres as a Low-Density Alternative to Traditional FillersLarson, L. D. / Robertson, D. L. / Ingham, T. L. et al. | 1998
- 855
-
New Options in Laser Marking Automotive ComponentsBurgess, A. / Feng, K. et al. | 1998
- 860
-
Characterization of Talc-Filled, Impact-Modified Polypropylene for use in Engineering AnalysesNaughton, P. / Van Daele, R. / McCallum, J. et al. | 1998
- 867
-
ELPO-Capable Polyurea RRIM Advancements for Automotive Body PanelsBambrick, C. / James, A. / Arnold, K. et al. | 1998
- 872
-
Infrared Post-Cure of RIM Body Panels: A Significant Cost SavingsJames, A. / McLaren, J. / Arnold, K. et al. | 1998
- 876
-
Development of Non-Adhesive Acrylic Rubber for Engine Oil FilterTanaka, N. / Yonemoto, T. / Aoyama, T. et al. | 1998
- 882
-
A Semiconductor Gas Sensor Array for the Detection of Gas Emissions from Interior Trim Materials in AutomobilesKalman, E.-L. / Winquist, F. / Lundstroem, I. et al. | 1998
- 887
-
The Steel Unibody: The Application of Cost Analysis to Determine Cost Reduction StrategiesDieffenbach, J. R. et al. | 1998
- 894
-
New Binder for Casting Cores: An Industrial Application to Safety Suspension PartsFerrero, A. / Badiali, M. / Schreck, R. et al. | 1998
- 900
-
Recent Developments in AA6016 Aluminum Type Body Sheet ProductBottema, J. / Lahaye, C. / Baartman, R. et al. | 1998
- 908
-
Identification of Dynamic Behavior of Sheet Metals for an Autobody with Tension Split Hopkinson BarKang, W. J. / Cho, S. S. / Huh, H. et al. | 1998
- 914
-
A Stressed Skin Sandwich Construction for the Automotive IndustrySlaven, J. / Marks, M. et al. | 1998
- 931
-
Concept Car-Life Cycle Energy AnalysisFewchuk, D. / Lamb, D. G. / Parikh, Y. et al. | 1998
- 936
-
Remanufacturing Process of Gasoline and Diesel Engines to OEM RequirementsKshonze, S. / Okulicz, W. et al. | 1998
- 945
-
Economic and Environmental Tradeoffs in New Automotive Painting TechnologiesGeffen, C. A. / Field, F. R. / Isaacs, J. A. et al. | 1998
- 953
-
Total Cost Analysis of Lead-Free Automotive ElectrocoatingWildern, N. L. / Isaacs, J. A. et al. | 1998
- 959
-
Squeeze Cast Permanent Mold (SCPM) Processes for Automotive Aluminum CastingsGerken, D. T. / Conaty, C. C. / Ogiwara, T. et al. | 1998
- 970
-
System Integration - A Continuous Line from CAD to Mass ProductionUziel, Y. et al. | 1998
- 974
-
Application of Fuzzy Classification Methods for Diagnosis of Reject Root Causes in Manufacturing EnvironmentChen, Y. / Gravel, D. / Filev, D. et al. | 1998
- 981
-
Efficient Development of Diagnostics: Information Extraction from High Fidelity Analog System SimulationMontgomery, T. A. / Marko, K. A. et al. | 1998
- 985
-
Using Database Specifications to Automate the Diagnosis of Factory Automation SystemsProvan, G. / El Fattah, Y. / Darwiche, A. et al. | 1998
- 991
-
Monitoring and Control of Equipment and Process in Cold ExtrusionBarnett, K. / Duggirala, R. / Hitz, D. et al. | 1998
- 1002
-
Addicted to Manufacturing!Zarka, J. et al. | 1998
- 1009
-
Manufacturing-Related Activities at Oakland University's School of Engineering and Computer SciencePolis, M. P. et al. | 1998
- 1013
-
Institute for Manufacturing Research, Wayne State Univ.Thomas, R. L. et al. | 1998
- 1020
-
Total Fatigue Life Prediction MethodsLawrence, F. V. et al. | 1998
- 1030
-
Improving Fillet Weld Fatigue Performance by Improving Weld ShapeMohr, W. / Bowers, R. / Jutla, T. et al. | 1998
- 1037
-
Simulation and Development of Advanced Cutting Tools Via Dynamic Finite Element AnalysisHoefler, B. / Kumar, S. et al. | 1998
- 1045
-
Intelligent Multi-Axis Motion Control for Machine Tool SystemsLiu, J. / Yokoyama, Y. / Yamazaki, K. et al. | 1998
- 1052
-
Efficiency and Accuracy of Linear Motor Driven Milling MachineSchulz, H. et al. | 1998
- 1057
-
Advanced 7/24 Taper Toolholder/Spindle Interfaces for High-Speed CNC Machine ToolsRivin, E. I. et al. | 1998
- 1069
-
Tools for High-Speed Machining - Safety ConceptsSchulz, H. / Wuerz, T. et al. | 1998
- 1077
-
In-Process Tool Utilization Analysis-Based Machining SimulationIsobata, Y. / Sun Kyu Lee / Yamazaki, K. et al. | 1998
- 1085
-
Real-Time Scheduling for Assembly ProcessesChauvet, F. / Proth, J.-M. et al. | 1998
- 1093
-
Recent Developments in Friction Stir WeldingGould, J. E. / Lienert, T. J. / Feng, Z. et al. | 1998
- 1101
-
Material and Heat Treatment Effect on the Bearing Inner Ring Fracture Under Hoop StressYoshikawa, T. / Murakami, Y. et al. | 1998
- 1108
-
Low Cost AutomationGaudette, D. A. et al. | 1998
- 1114
-
The University of Tennessee Maintenance and Reliability Center Motor Shaft Misalignment Research ProjectWesley Hines, J. / Jesse, S. et al. | 1998
- 1118
-
Shop Floor ManagementHayes, J. et al. | 1998
- 1121
-
Job Rotation Based on ErgonomicsBaio, J. R. et al. | 1998
- 1124
-
Training Programs for Implementing Lean Manufacturing Concepts in Small to Medium Sized ManufacturersSawhney, R. / Arms, K. / Beasley, C. et al. | 1998
- 1128
-
Tools for Environmental Design: The Life-Cycle Design ToolkitDavis, G. A. et al. | 1998
- 1134
-
An Environmentally Conscious Decision Support System for the Automotive IndustryLoBosco, G. / Dhingra, R. et al. | 1998
- 1142
-
Real-Time Exhaust Gas Flow Measurement SystemHardy, J. E. / McKnight, T. E. / Hylton, J. O. et al. | 1998
- 1148
-
Metal Compression Forming - A New Process for Structural Aluminum Alloy CastingsViswanathan, S. / Brinkman, C. R. / Purgert, R. M. et al. | 1998
- 1153
-
A Design of Internet-Based Remote Manufacturing SystemSmutkupt, U. / Charoenseang, S. / Kawamura, K. et al. | 1998
- 1157
-
Predictive Model and Methodology for Heat Treatment DistortionLudtka, G. M. / Elliott, W. H. / Pattok, T. et al. | 1998
- 1174
-
Next Generation Casting Process Models - Predicting Porosity and MicrostructureViswanathan, S. / Sabau, A. S. / Duncan, A. J. et al. | 1998
- 1178
-
Method of Formulating Paint Through Color Space ModelingSnyder, D. L. / Hammock, W. K. / Wallus, J. A. et al. | 1998
- 1183
-
Simulation and Analysis of an Automotive Assembly OperationMiller, D. M. / Park, Y. et al. | 1998
- 1188
-
Environmental Evaluation of Molding Exterior Body Panels in ColorKelly, K. E. / Overly, J. G. / Socolof, M. L. et al. | 1998
- 1193
-
Cluster vs. Linear Team DynamicsCooley, P. J. et al. | 1998
- 1197
-
Implementing ISO 14001 in a Multi-Site Manufacturing EnvironmentCorbin, G. / Townsend, R. et al. | 1998
- 1204
-
Body and Component Accuracy in Assembly SystemsHanicke, L. / Haeller, R. / Hoegstroem, P. et al. | 1998
- 1212
-
Impact of Part Variation on In-Process Coordinate Measurements for Automotive Body AssembliesCeglarek, D. / Brahmst, E. et al. | 1998
- 1220
-
The Application of Bonded Aluminum Sandwich Construction Technology to Achieve a Lightweight, Low Cost Automotive StructureGobessi, M. / Arnold, W. et al. | 1998
- 1226
-
A New Application for Powder Metals: Cast-In-Place Bushings for Diecast Magnesium Steering WheelsKuhn, C. W. et al. | 1998
- 1235
-
An Experimental Investigation of Spray Transfer Processes in an Electrostatic Rotating Bell ApplicatorLiu, Y. / Lai, M.-C. / Im, K.-S. et al. | 1998
- 1244
-
Transient CFD Simulations of a Bell SprayerMiller, R. / Strumolo, G. / Babu, V. et al. | 1998
- 1253
-
Sensitivity of Material Constitutive Parameters in Sheet Metal Forming SimulationsShi, M. F. / Prince, D. G. / Song, W. et al. | 1998
- 1261
-
Development of Dry Lubricants for Stamping of Automotive PartsSchedin, E. / Gunnarsson, L. / Jacobsson, D. et al. | 1998
- 1269
-
Influence of the Application of Dry-Lubricant on the Production Route for Aluminum Hang-On Parts at VolvoLahaye, C. / Janson, I. / Olofsson, A. et al. | 1998
- 1280
-
Fatigue Life Prediction of MAG-Welded Thin-Sheet StructuresFermer, M. / Andreasson, M. / Frodin, B. et al. | 1998
- 1287
-
The Hydroforming Technology Seen Through the Eyes of a Material Supplier and a HydroformerVan Schaik, M. / Schulze, B. / Carleer, B. et al. | 1998
- 1297
-
Tube Hydroforming: Efficiency and Effectiveness of Pressure Sequence HydroformingMorphy, G. et al. | 1998
- 1306
-
Investigation of the Strain Behavior of Laser-Beam and High-Frequency-Welded Seams of Tailored Blanks Using Electronic Laser Speckle InterferometryDraugelates, U. / Schram, A. / Hillebrecht, M. et al. | 1998
- 1312
-
Influence of Phosphate Pretreatments and Organic Coatings on the Spot Welding Characteristics of Zinc Coated SteelsChatterjee, K. L. et al. | 1998
- 1323
-
Minimizing Wear in Adhesive/Sealant Applicators Via Design of ExperimentsSathyagal, A. / Heilig, W. / Weiss, K. et al. | 1998
- 1329
-
Development of High Strength Hot Rolled Steel to Be Applied for Flanging DeformationKobayashi, H. et al. | 1998
- 1344
-
Development and Processing of Density Reduced Magnesium AlloysHaferkamp, H. / Holzkamp, U. / Juchmann, P. et al. | 1998
- 1351
-
Aluminum Tailored Blank Welding with and Without Wire Feed, Using High Power Continuous Wave Nd:YAG LaserNaeem, M. / Jessett, R. et al. | 1998
- 1358
-
The Influence of the Weld Structure on the Formability of Laser Welded Tailored BlanksWaddell, W. / Jackson, S. / Wallach, E. R. et al. | 1998
- 1370
-
Flexforming of Prototype and Low-Volume PartsPeltier, D. J. / Johannisson, T. G. et al. | 1998
- 1377
-
New Microstructural Approaches for Improved Mechanical Properties of Multiphase Steels with Emphasis on TRIP SteelsEhrhardt, B. / Engl, B. / Gerber, T. et al. | 1998
- 1383
-
Recent Experience with the Application of TRIP and Other Advanced Multiphase SteelsEngl, B. / Kessler, L. / Lenze, F.-J. et al. | 1998
-
Annual Index/Abstracts of SAE Technical Papers 1998| 1998