Acta physica Polonica / A
Die Inhaltsverzeichnisse werden automatisch erzeugt und basieren auf den im Index des TIB-Portals verfügbaren Einzelnachweisen der enthaltenen Beiträge. Die Anzeige der Inhaltsverzeichnisse kann daher unvollständig oder lückenhaft sein.
Inhaltsverzeichnis
- 171
-
On the Validity of Diffusional Model in Determination of Electric Transport Parameters of Semi-conductor CompoundDussan, A. / Mesa, F. et al. | 2014
- 171
-
Proceedings of the 3rd International Congress APMAS2013 April 24-28, 2013, Antalya, Turkey - On the Validity of Diffusional Model in Determination of Electric Transport Parameters of Semiconductor CompoundDussan, A et al. | 2014
- 174
-
Density of States in Thin Boron-Doped Microcrystalline Silicon Films Estimated from the Thermally Stimulated Conductivity MethodDussan, A et al. | 2014
- 177
-
Structural Alterations in Mechanically Activated MalachiteTunç, T et al. | 2014
- 180
-
Structured Analysis of Stainless Steel 316L Material of Micro-Forceps Used in Vitrectomy Surgery by Biomechanics ModelingKaraçali, Ö et al. | 2014
- 183
-
Finite Element Analysis of Pallet-Nail Materials Used in Pallet Joint Design for Material Handling WorksKaraçali, Ö et al. | 2014
- 186
-
A Research on Structured Analysis of Biomaterial of Dental Implant in Computer Aided Biomechanical Engineering ModellingKaraçali, Ö et al. | 2014
- 189
-
Reciprocating Wear Behavior of Ductile Cast Iron Modified by Pulse Plasma TechnologyAyday, A et al. | 2014
- 192
-
Non-Linear Stability of Conical Shell Structures Including a Functionally Graded CoreSofiyev, A H et al. | 2014
- 195
-
Nonlinear Optical Rectification and Second Harmonic Generation in 2D Quantum Rings under Electric Field and Magnetic FieldsMorales, A L et al. | 2014
- 198
-
Intense Laser Field Effects on the Shallow-Donor Impurity States in Rectangular-Shaped Quantum Well WiresDuque, C A et al. | 2014
- 202
-
Optical Responses in Asymmetric Inverse Parabolic Quantum Wells: Effects of Laser Fields and Hydrostatic PressureMora-Ramos, M E et al. | 2014
- 205
-
Simple Microwave Technique for Non-Destructive Testing of Electrical Properties of Magnetized MaterialsLaurinavičius, L et al. | 2014
- 208
-
The Response of the Heat Affected Zone to Natural Aging in Friction Welded Al-Mg-Si-T6 AlloyAbudaia, F B et al. | 2014
- 211
-
Crack Detection Using Fluxgate Magnetic Field SensorIzgi, T et al. | 2014
- 214
-
Production of LaCaMnO3 Composite by Ball MillingGencer, H et al. | 2014
- 217
-
Field Induced Unusual Magnetic Behavior at Low Temperature in Pr0.67Ca0.33MnO3Pektas, M et al. | 2014
- 220
-
Double-Donor Energy Structure in Concentric Quantum Rings under Magnetic Field and Hydrostatic PressureFulla, M R et al. | 2014
- 224
-
The Formation of Free Standing NiO Nanostructures on Nickel Foam for SupercapacitorsAtalay, F E et al. | 2014
- 227
-
Magnetoimpedance Effects in Electrodeposited NiFe Nanowire ArrayAydogmus, E et al. | 2014
- 230
-
Magnetoresistance of Electrochemically Produced NiFe and CoNiFe NanowiresAvcu, D et al. | 2014
- 232
-
Effects of Microstructural Transformation in TBCs Consisting of NiCrAlY Metallic Bond Coat and YSZ Ceramic Top Coat after Oxidation at 900°CParlakyigit, A S et al. | 2014
- 232
-
Effects of Microstructural Transformation in TBCs Consisting of NiCrAlY Metallic Bond Coat and YSZ Ceramic Top Coat after Oxidation at 900^oCParlakyigit, A.S. / Karaoglanli, A.C. et al. | 2014
- 235
-
The Fabrication of NiO Microtubes Using Bacillus SubtilisBacteriaAtalay, F E et al. | 2014
- 238
-
Shear Bond Strength Comparison between Conventional Dental Nano Zirconia Combinations and New Functionally Graded Nano Zirconia Combinations after Thermal-Mechanical CyclingSun, T et al. | 2014
- 241
-
D+2 Molecular Complex in Ring-Like Nanostructures: Hydrostatic Pressure and Electromagnetic Field EffectsFulla, M R et al. | 2014
- 245
-
Impurity-Related Nonlinear Optical Absorption in Delta-Doped Quantum RingsRestrepo, R L et al. | 2014
- 248
-
The Antibacterial Activities of Ag/Nano-TiO2 Modified Silicone ElastomerWang, L L et al. | 2014
- 251
-
Wear Properties of the Surface Alloyed AISI 1020 Steel with Vanadium and Boron by TIG Welding TechniqueAbakay, E et al. | 2014
- 254
-
Tribological Behavior of Copper/MWCNT Nanocomposites Produced by Pulse ElectrodepositionGül, H et al. | 2014
- 257
-
The Spark Plasma Sintering of Silicon Carbide Ceramics Using AluminaUnlu, M D et al. | 2014
- 260
-
Spark Plasma Sintering of Boron Carbide Ceramics Using Different Sample Geometries and DimensionsCengiz, M et al. | 2014
- 263
-
The Effects of Accelerating Admixture on the Mechanical Properties of Boric Acid Added MortarsDavraz, M et al. | 2014
- 268
-
Measurement of Radon Level in Dwellings of the Yildirim County in BursaKahraman, A et al. | 2014
- 271
-
Effect of Thermal Annealing on the Sensitivity of Makrofol-DE PolycarbonateKahraman, A et al. | 2014
- 275
-
Determination of Natural Radioactivity in Aggregates from Western Mediterranean RegionPehlivanoglu, F et al. | 2014
- 278
-
Preparation and Characterization of LaMoO~3, La~xSr~yV~zO~3 and La~xSr~yMo~xO~3 Perovskite Type Oxides by the Sol-Gel Citrate MethodFigen, H.E. / Guldal, N.O. / Baykara, S.Z. et al. | 2014
- 278
-
Preparation and Characterization of LaMoO3, LaxSryVzO3 and LaxSryMozO3 Perovskite Type Oxides by the Sol-Gel Citrate MethodFigen, H E et al. | 2014
- 281
-
Structural Characterization of Al2O3 and CeO2 Supported Ni, Co Loaded Ceramic Monolithic CatalystsGuldal, N Ö et al. | 2014
- 285
-
Electrochemical Performance of Silicon/MWCNT Composite Electrodes for Lithium Ion BatteriesCetinkaya, T. / Tocoglu, U. / Cevher, O. et al. | 2014
- 288
-
Methanol Vapor Sensing by Porous SiliconYilmaz, O. / Kayahan, E. / Goren, F. et al. | 2014
- 290
-
Cyclic Performance Study of Silicon/Carbon Nanotube Composite Anodes Using Electrochemical Impedance SpectroscopyTocoglu, U. / Cevher, O. / Cetinkaya, T. et al. | 2014
- 293
-
Effects of RF Power on Electrical and Structural Properties of Sputtered SnO~2:Sb Thin FilmsCevher, O. / Guler, M.O. / Tocoglu, U. et al. | 2014
- 296
-
Thin Film Nanostructured ATO and ATO Based Composite Anodes for Li-Ion BatteriesCevher, O. / Guler, M.O. / Tocoglu, U. et al. | 2014
- 299
-
Radiation Shielding Properties of ShotcreteGunoglu, K. / Akkurt, I. / Basyigit, C. et al. | 2014
- 301
-
A Web-Based Virtual Experiment in Material Science: Tensile Test Laboratory ApplicationKiraz, A. / Kubat, C. / Ozbek, Y.Y. et al. | 2014
- 301
-
Nanostructured ZnO Photoelectrode Synthesis for Dye Sensitized Solar CellsGultekin, D. / Alaf, M. / Akbulut, H. et al. | 2014
- 304
-
Wear Performance of Hardened 1.2333 Cold Work Tool Steel by Plasma ElectrolysisOzel, A. / Kumruoglu, L.C. et al. | 2014
- 307
-
Electrochemical Impedance of Sn Nanowire ArraysKaya, H. / Aydogmus, E. / Avcu, D. et al. | 2014
- 313
-
The Influence of Different Resin Cements and Pretreatments on the Bond Strength between Zirconia and CementSun, T. / Hu, C. / Wang, L.L. et al. | 2014
- 316
-
Radiation Protection by the Barite Coated Fabrics via Image Processing MethodologyAkarslan, F. / Molla, T. / Akkurt, I. et al. | 2014
- 319
-
Nanocomposite ZnO:MWCNT Thin Films for Li-Ion Batteries Prepared via Reactive Magnetron SputteringGuler, M.O. / Cetinkaya, T. / Cevher, O. et al. | 2014
- 322
-
Characteristics and Electrochemical Performance of TiO~2:MWCNT Nanocomposite Anodes for Li-Ion BatteriesGuler, M.O. / Cetinkaya, T. / Cevher, O. et al. | 2014
- 325
-
The Promising Synthetic Route Hydrothermal Synthesis of Non-Stoichiometric Cerium and Boron Containing Compounds and CharacterizationCelik, G. / Kurtulus, F. et al. | 2014
- 327
-
Development of W-Cu-NiElectrical Contact Materials with Enhanced Mechanical Properties by Spark Plasma Sintering ProcessLungu, M. / Tsakiris, V. / Enescu, E. et al. | 2014
- 331
-
The Effect of Calcination Temperature on the Electrochemical Performance of ZnO Coated LiMn~3O~4/MWCNT Nanocomposite CathodesAkbulut, A. / Cetinkaya, T. / Guler, M.O. et al. | 2014
- 336
-
The Superior Surface Discharge Capacity of Core-Shell Tinoxide/Multi Walled Carbon Nanotube Nanocomposite Anodes for Li-Ion BatteriesAkbulut, H. / Alaf, M. / Gultekin, D. et al. | 2014
- 339
-
The Effect of Different Organic Gelating Agents on Grain Size of ZnO NanoparticlesKaraal, S. / Kose, H. / Aydin, A.O. et al. | 2014
- 342
-
Measurements of Double Differential Cross-Sections for He at Intermediate EnergyOzer, Z.N. / Olgac, F. / Ulu, M. et al. | 2014
- 343
-
Measurement of Double Differential Cross-Section for Electron Impact Ionization of Argon at 348 eVBozkurt, G. / Yavuz, M. / Ozer, Z.N. et al. | 2014
- 346
-
The Effect of Temperature on Grain Size of SnO~2 Nanoparticles Synthesized by Sol-Gel MethodKose, H. / Aydin, A.O. / Akbulut, H. et al. | 2014
- 349
-
Nanostructured W-Cu Electrical Contact Materials Processed by Hot Isostatic PressingTsakiris, V. / Lungu, M. / Enescu, E. et al. | 2014
- 354
-
Electrochemical Performance of Pulse Electrodeposited Sn-Ni/MWCNT Composite Anode for Lithium-Ion BatteriesUysal, M. / Gormus, H. / Karslioglu, R. et al. | 2014
- 357
-
Microwave-Assisted Synthesis of CeVO~4 in the Mild Conditions, Characterization and Investigation of Luminescent PropertiesCelik, G. / Kurtulus, F. et al. | 2014
- 359
-
Corrosion Properties of CrAlN and TiAlN Coatings Deposited by Thermo-reactive Deposition ProcessCegil, O. / Kilinc, B. / Sen, S. et al. | 2014
- 362
-
Wear Behavior of TiAlN and CrAlN Coatings Deposited by TRD Process on AISI D2 SteelKilinc, B. / Cegil, O. / Sen, S. et al. | 2014
- 367
-
Synthesis, Structural and Optical Properties of Mo-Doped ZnO Thin FilmsMekki, A. / Tabet, N. et al. | 2014
- 368
-
Preparation and Characterization of Urea/Formaldehyde/Rosa Canina sp. Seeds CompositesGurses, A. / Karagoz, S. / Mindivan, F. et al. | 2014
- 374
-
Synthesis and Characterization of Phenol/Urea/Formaldehyde and Clay CompositesDogar, C. / Gurses, A. / Koktepe, S. et al. | 2014
- 379
-
Electrolytic Plasma Surface Cleaning of Industrial Metallic ComponentsKumruoglu, L.C. / Ozel, A. et al. | 2014
- 382
-
Parametric Study of the Seismic Response of Base Isolated Liquid Storage Tanks with Lead-Core Elastomeric BearingsYazici, G. et al. | 2014
- 385
-
Growth Analysis and Numerical Simulation of Cu~3BiS~3 Absorbing Layer Solar Cell through the wxAMPS and Finite Element MethodMesa, F. / Ballesteros, V. / Dussan, A. et al. | 2014
- 388
-
Investigation of Mechanical and Dry Sliding Wear Behaviours of AlB~2/PE Polymer Matrix CompositeSavas, O. / Ficici, F. / Kayikci, R. et al. | 2014
- 391
-
The Effect of Mg Supplement on Hydroxyapatite Produced by Chemical PrecipitationBastan, F.E. / Agtas, G. / Ozbek, Y.Y. et al. | 2014
- 393
-
The Effect of Process Parameters on Surface Behaviors of Low Carbon Steels Modified by Pulse Plasma TechniqueAgdas, G. / Ozbek, Y.Y. et al. | 2014
- 396
-
Effect of B~4C Content on the Mechanical and Tribological Performances of PolypropyleneDike, A.S. / Mindivan, F. / Mindivan, H. et al. | 2014
- 399
-
Characterization of CoTi Intermetallic Materials Produced by Electric Current Activated SinteringErgin, N. / Ozdemir, O. et al. | 2014
- 402
-
Suggestion of New Formulations for Schmidt Hammer and UPV Test Methods for ConcreteCavdar, A. / Bingol, S. et al. | 2014
- 405
-
One-Dimensional Cellular Automata with Reflective Boundary Conditions and Radius ThreeAkin, H. / Siap, I. / Uguz, S. et al. | 2014
- 408
-
Coating Effect on Magnetic Properties of Fe~3~6Co~3~6B~1~9~.~2Si~4~.~8Mo~3W~1 Amorphous RibbonsPerincek, F. / Haciismailoglu, M. / Sarlar, K. et al. | 2014
- 411
-
Electrical Properties of GaInAsSb/GaSb/GaAlAsSb Double Heterostructure with Low DiameterKucur, B. / Ahmetoglu, M. / Andreev, I.A. et al. | 2014
- 414
-
Gas Nitriding Behaviour of 34CrAlNi7 Nitriding SteelAltinsoy, I. / Onder, K.G. / Efe, F.G.C. et al. | 2014
- 417
-
Comparing of Commercial and Cemented Cu-SiC CompositesEfe, G.C. / Altinsoy, I. / Yener, T. et al. | 2014
- 420
-
Gamma Attenuation Behavior of h-BN and h-BN-TiB2 CompositesBuyuk, B et al. | 2014
- 423
-
Comparison of Lead and WC-Co Materials against Gamma IrradiationBuyuk, B et al. | 2014
- 426
-
A New Approach to Synthesis of Free-Standing ZnO/MWCNT Nanocomposites by Vacuum InfiltrationAlaf, M et al. | 2014
- 429
-
Recycling of Pure Magnesium Chips by Cold Press and Hot Extrusion ProcessesMindivan, H et al. | 2014
- 432
-
Production of Mg-3Al Based Composites Reinforced with Ti6A14V ParticlesKumruoglu, L C et al. | 2014
- 432
-
Production of Mg-3Al Based Composites Reinforced with Ti6Al4 V ParticlesKumruoglu, L.C. et al. | 2014
- 435
-
2D Cellular Automata with an Image Processing ApplicationUguz, S et al. | 2014
- 439
-
Single Pulse Laser Ablation of AISI 316L Stainless Steel Surface Using Nd:YAG Laser IrradiationDemir, P et al. | 2014
- 442
-
Double Differential Cross-Section Measurements for Methane Molecule at 350 eVYavuz, M et al. | 2014
- 445
-
Open Cell Aluminum Foams Produced by Polymer Impregnation MethodZaman, E et al. | 2014
- 449
-
A Simulation and Fabrication Works on Optimization of High Pressure Aluminum Die Casting PartErtürk, S Ö et al. | 2014
- 452
-
Fabricating of Steel/Cast Iron Composite by Casting RouteErtürk, S Ö et al. | 2014
- 454
-
Noise Response and Stability in Injection Locked Semiconductor Ring LaserMemon, M I et al. | 2014
- 456
-
Oxidation Behavior of Nanolayer AlTiN/TiN Nanolayer Hard Coating at High TemperaturecÇalişkan, H et al. | 2014
- 459
-
Stability Analysis of Clamped Nonhomogeneous Shells on the Elastic FoundationSofiyev, A H et al. | 2014
- 462
-
Dependence of Modulation Bandwidth on Size of Optical Injection Locked Semiconductor Ring LaserMemon, M I et al. | 2014
- 465
-
Microstructural Characterization and Thermal Properties of Aluminium Titanate/YSZ CeramicsÇitak, E et al. | 2014
- 469
-
Evaluation of Gamma Penetration through Plain Carbon SteelsDurmaz, H et al. | 2014
- 473
-
Investigation of Mechanical Properties of Metal Inert Gas-Brazed TRIP800 Steel Joints Using Different Shielding Gas Flow RateAkkas, N et al. | 2014
- 475
-
The Effect of Sliding Motion on Tribological Characteristics of PA6 and Zinc-Borate Reinforced PA6 CompositesAkinci, A et al. | 2014
- 478
-
Influence of Load and Speed on Sliding Tribology of Silica-Polyamide Composites against AISI 4140 SteelAkinci, A et al. | 2014
- 481
-
Surface Texturing of Vitamin E Blended UHMWPE for Reduction of WearSagbas, B et al. | 2014
- 484
-
Importance of Measurement Parameters for the Dental Implant Surface CharacterizationGunay, A et al. | 2014
- 488
-
Microstructural Characterization and Thermal Properties of Aluminium TitanateÖnen, U et al. | 2014
- 488
-
Microstructural Characterization and Thermal Properties of Aluminium Titanate/Spinel Ceramic Matrix CompositesOnen, U. / Boyraz, T. et al. | 2014
- 491
-
The Effect of Low Temperature Plasma Nitriding on Wear Resistance of Ti6Al4 V AlloyGul, O et al. | 2014
- 494
-
The Evaluation of Solid Particle Erosion in Polymethyl Methacrylate by Surface Topography MappingFidan, S et al. | 2014
- 497
-
Effect of Welding Current on Mechanical Properties of Welding Joints in SPA-C Steel Sheets in Resistance Spot WeldingAkkas, N et al. | 2014
- 500
-
Effect of Welding Current on Mechanical Properties of Welding Joints in S235JR(Cu) Steel Sheets in Resistance Spot WeldingAkkas, N et al. | 2014
- 503
-
Rheological Behavior of Modified Starch/EVA BlendsAydin, I et al. | 2014
- 506
-
Role of the Quartz Particles on Stain Resistance of the Polished Porcelain TilesSelli, N T et al. | 2014
- 509
-
Enhancement of the After-Glow Properties of Photoluminescent Tile by Designing Frit Composition with Low-Temperature MeltingSelli, N T et al. | 2014
- 511
-
Effect of B2O3/SiO2 Ratio on Transparency of Anorthite Based Glass-Ceramic GlazesTunali, A et al. | 2014
- 513
-
Influence of the Photoluminescent Pigments' Particle Size Distribution on the After Glow DurationTunali, A et al. | 2014
- 515
-
An Investigation on Surface and Electrical Properties of Electrical Discharge Machined AISI D2 Tool SteelDurmus, A et al. | 2014
- 518
-
Mechanical and Thermal Properties of Pumice Powder Filled PPS CompositesSahin, A E et al. | 2014
- 521
-
Calculation of Greenland and Antarctica Glaciers' Weights Causing Some Earthquakes and Volcanic ActivitiesÜrüşan, A Y et al. | 2014
- 523
-
Effect of Particle Impact Angle, Erodent Particle Size and Acceleration Pressure on the Solid Particle Erosion Behavior of 3003 Aluminum AlloyYildiran, Y et al. | 2014
- 526
-
Development of a Polymer Based Syntactic Foam for High Temperature ApplicationsYazici, M et al. | 2014
- 529
-
Influence of Martensite Volume Fraction on Ductile to Brittle Transition of Triple Phase Ferrite-Perlite-Martensite Steels Joined by GMAW and Electrical Arc WeldingEkici, M et al. | 2014
- 532
-
On the Flexural Vibration of Pre-Stressed Nanobeams Based on a Nonlocal TheoryRahmani, O et al. | 2014
- 534
-
On Pseudo Random Bit Generators via Two-Dimensional Hybrid Cellular AutomataTemiz, F et al. | 2014
- 538
-
Magnetic Properties of Poly (Divinylbenzene, Ethylene Glycol Dimethacrylate and Vinyl Alcohol) Containing Barium Ferrite NanoparticlesGunes, S et al. | 2014
- 541
-
Influences of Particle Impingement Angle and Velocity on Surface Roughness, Erosion Rate, and 3D Surface Morphology of Solid Particle Eroded Ti6Al4 V AlloyAvcu, E et al. | 2014
- 544
-
Related Aspects on Using Digital Tools in the Process of Introducing Nanotechnology in Science LessonsGorghiu, L M et al. | 2014
- 548
-
B-Spline Solution for a Convection-Diffusion EquationCaglar, H et al. | 2014
- 551
-
The Numerical Solution of Fractional Diffusion Equation by Using Local Polynomial RegressionCaglar, H et al. | 2014
- 554
-
B-Spline Solution and the Chaotic Dynamics of Troesch's ProblemCaglar, H et al. | 2014
- 560
-
Tribological Behaviors of SiO2 Added Polyester Matrix Thermosetting CompositesAkinci, A et al. | 2014
- 563
-
Effects of Nb-Alloying on High-Temperature Oxidation of MoSi2Sharif, A A et al. | 2014
- 567
-
Sintering Conditions for Al2(WO4)3 High-Dense CeramicYordanova, A et al. | 2014
- 571
-
Investigating Effects of Testing Parameters on Frictional Heating of UHMWPE by Taguchi MethodSagbas, B et al. | 2014
- 574
-
Optical Properties of BN and BBi CompoundsYalcin, B G et al. | 2014
- 577
-
The Evolution of Microstructure for Ductile Iron Treated under Different Thermal Cycles Using Electrolytic Plasma TreatmentAyday, A et al. | 2014
- 579
-
The High Temperature Effect on Fibre Reinforced Self Compacting Lightweight Concrete Designed with Single and Hybrid FibresBozkurt, N et al. | 2014
- 584
-
Properties of the Surface Alloyed AISI 1020 Steel with Fe(15-x)MoxB5 AlloyAbakay, E et al. | 2014
- 587
-
Wear Properties of the Surface Alloyed AISI 1020 Steel with Fe(15-x)MoxB5 by TIG Welding TechniqueAbakay, E et al. | 2014
- 590
-
The Effect of Reinforcement Ratio on the Wear Behaviour of AlB2 Flake Reinforced Metal Matrix CompositesKayikci, R et al. | 2014
- 593
-
Improving the Surface Properties of Cp-Ti by Pulsed Electro-Spark DepositionYilmaz, M S et al. | 2014
- 597
-
Synthesis and Characterization of Fe80B20 Nanoalloys Produced by Surfactant Assisted Ball MillingFadaie, A et al. | 2014
- 600
-
Effects of Nanoparticle Geometry and Temperature on the Structural Evolution in FeCo NanoalloysYalçin, M et al. | 2014
- 603
-
Adherence Properties of Acrylic Bone Cement to Alumina Ceramics Designed for Clinical ApplicationsCavalu, S et al. | 2014
- 606
-
Behavior of Quantum Fisher Information of Bell Pairs under Decoherence ChannelsOzaydin, F et al. | 2014
- 608
-
Photocatalytic Activity of TiO2 Powders Synthesized by Supercritical Gas Antisolvent MethodTuncer, M et al. | 2014
- 611
-
Enhanced Electro-Optic Modulation Performance in Optical Buffers by Slowing Light in Optimized Photonic Crystal Slab StructuresBagci, F et al. | 2014
- 615
-
Wear Properties of Gabbro Based Glass and Glass-Ceramic MaterialsBayrak, G et al. | 2014
- 618
-
Alpha Head on Collision with a Fixed Gold Nucleus, Taking into Account the Relativistic Rest Mass Variation as Implied by Mass-Energy EquivalenceYarman, T et al. | 2014
- 620
-
Bond Strength of Basalt Based Glass-Ceramic CoatingsBayrak, G et al. | 2014
- 623
-
Granite Based Glass-Ceramic MaterialsBayrak, G et al. | 2014
- 626
-
Glass and Glass-Ceramics Produced from Fly Ash and Boron WasteErcenk, E et al. | 2014
- 629
-
Sintering Behavior and Machinability in Mica Glass-Ceramic of the System SiO2-Al2O3-MgO-K2O-B2O3-FErcenk, E et al. | 2014
- 632
-
The Effect of Perlite Addition on Erosive Wear Behavior of Alumina CeramicsTas, S et al. | 2014
- 635
-
A New Fiber Optic SpringYaltkaya, S et al. | 2014
- 638
-
A Novel Photon Model — Featuring an Internal Dynamics along with an Amplitude of the Oscillating Particle of LightYarman, T et al. | 2014
- 642
-
Shielding Effectiveness of Ceramic Bodies Produced with Natural ZeoliteKanberoglu, B et al. | 2014
- 645
-
Comparison of Antibacterial Properties of Nano TiO2 and ZnO Particle Filled PolymersAltan, M et al. | 2014
- 648
-
Synthesis and Characterization of Spinel Li4 Ti5 O12 Anode Material by CTAB Assisted Sol-Gel MethodKiliçDokan, F et al. | 2014
- 650
-
Effects of TiO2 Source on the Electrochemical Performance of Li4 Ti5 O12KiliçDokan, F et al. | 2014
- 652
-
Influence on Static Grain Growth and Sinterability of BaO Addition into 8YSZAktas, B et al. | 2014
- 656
-
Characterization of Fe-Nb-BBase Hardfacing of SteelKilinc, B et al. | 2014
- 659
-
Plasma Electrolytic Oxidation of Binary Al-Sn AlloysGencer, Y et al. | 2014
- 664
-
Properties of ZnO Nanopowders Synthesized by Glycine-Nitrate Gel CombustionYildiz, Ö et al. | 2014
- 667
-
Industrial-Scale Application of Characterization Techniques to Improve Surface Quality of Opaque Floor Tile GlazesTunali, A et al. | 2014
- 669
-
Structural Analysis of Ce Doped La~1~-~xSr~xCo~1~-~yFe~yO~3~-~ ~d~e~l~t~a~ Nanopowders Synthesized by Glycine-Nitrate Gel CombustionYildiz, O. / Soydan, A.M. / Ata, A. et al. | 2014
- 669
-
Structural Analysis of Ce Doped La1-xSrxCo1-yFeyO3-δ Nanopowders Synthesized by Glycine-Nitrate Gel CombustionYildiz, Ö et al. | 2014
- 673
-
FMR Study of Co/Ti Bilayer Thin FilmsErkovan, M. / Ozturk, S.T. / Gazioglu, D.T. et al. | 2014
-
FMR Study of Go/Ti Bilayer Thin FilmsErkovan, M et al. | 2014