Journal of applied polymer science
Die Inhaltsverzeichnisse werden automatisch erzeugt und basieren auf den im Index des TIB-Portals verfügbaren Einzelnachweisen der enthaltenen Beiträge. Die Anzeige der Inhaltsverzeichnisse kann daher unvollständig oder lückenhaft sein.
Inhaltsverzeichnis
- 1377
-
Instant modification of graphite nanosheets by the grafting of a styrene oligomer under microwave radiationLi, Jianping / Lin, Hongfei / Zhao, Weifeng et al. | 2008
- 1381
-
Thermal reproducibility and voltage stability of carbon black/multiwalled carbon nanotube and carbon black/SnO2‐Sb coated titanium dioxide filled silicone rubber heatersKim, Gwang‐Tae / Park, Eun‐Soo et al. | 2008
- 1388
-
In situ microwave‐assisted polymerization of polyethylene terephtalate in layered double hydroxidesMartínez‐Gallegos, Sonia / Herrero, Mar / Rives, Vicente et al. | 2008
- 1395
-
Morphology and mechanical properties of natural rubber and styrene‐grafted natural rubber latex compoundsArayapranee, Wanvimon / Rempel, Garry L. et al. | 2008
- 1403
-
Modeling of the particle size distribution in emulsion polymerizationSood, Ashwini et al. | 2008
- 1420
-
Air‐hole properties of calcite‐filled polypropylene copolymer filmsBiswas, Jagannath / Kim, Hyun / Lee, Byung Hyung et al. | 2008
- 1431
-
An improvement on water absorbing and permeating properties: Heparin immobilizing on acrylic acid‐grafted and collagen/chitosan‐immobilized wound dressingWang, Chyung‐Chyung / Chen, Cheng‐Chi / Chen, Frank‐Len et al. | 2008
- 1439
-
Mechanical properties and water sorption behavior of phenol–formaldehyde hybrid composites reinforced with banana fiber and glass fiberJoseph, Seena / Sreekala, M. S. / Koshy, Peter et al. | 2008
- 1447
-
Irradiation‐induced grafting of polyacrylamide onto the sulphonated poly(2,6‐dimethyl‐1,4‐phenylene oxide) (SPPO) films as well as its use as catalytical layer in a bipolar membraneChen, Guangwen / Xu, Tongwen / Liu, Junsheng et al. | 2008
- 1454
-
Synthesis and characterization of emulsion polymerized mixed matrix aluminum silicate/poly(2,6‐dimethyl 1,4‐phenylene oxide) filmsSadeghi, F. / Tremblay, A. Y. / Kruczek, B. et al. | 2008
- 1461
-
Hydrogel characteristics of a novel temperature‐sensitive polymer, poly(N‐2‐methoxyisopropylacrylamide)Şölener, Musa et al. | 2008
- 1467
-
Augmenting the performance of acrylonitrile–butadiene–styrene plastics for low‐noise dynamic applicationsGanguly, Anirban / Saha, Swatilekha / Bhowmick, Anil K. et al. | 2008
- 1476
-
Maghnite‐H+, a solid catalyst for the cationic polymerization of α‐methylstyreneMoulkheir, Ayat / Harrane, Amine / Belbachir, Mohamed et al. | 2008
- 1480
-
Polymeric thermal actuation using laminates based on polymer–clay nanocompositesChen, Biqiong / Liu, Shuo / Evans, Julian R. G. et al. | 2008
- 1484
-
A comparative study of short nylon fiber—Natural rubber composites prepared from dry rubber and latex masterbatchP. K., Bipinbal / Kutty, Sunil K. N. et al. | 2008
- 1492
-
Epoxy‐clay nanocomposites: Influence of the clay surface modification on structureRýznarová, B. / Zelenka, J. / Lednický, F. et al. | 2008
- 1498
-
Effect of solvent composition on transparency and surface hardness of poly(methyl methacrylate)‐silica nanocomposites provided on polycarbonateSaito, Reiko / Kobayashi, Shin‐Ichiro / Hayashi, Hidetaka et al. | 2008
- 1505
-
Mechanical and thermal properties of polycarbonate, part 1: Influence of free quenchingRouabah, F. / Fois, M. / Ibos, L. et al. | 2008
- 1515
-
Melting behavior, isothermal and nonisothermal crystallization kinetics of PP/mLLDPE blendsQin, Jianglei / Guo, Shaoqiang / Li, Zhiting et al. | 2008
- 1524
-
Porous honeycomb films prepared from poly (phthalazionone ether sulfone ketone) (PPESK) by self‐organization methodZhang, Youquan / Tian, Ye / Wang, Lihua et al. | 2008
- 1529
-
Highly active ethylene/hydroxyl comonomers copolymerization using metallocene catalystsExpósito, M. T. / Vega, J. F. / Ramos, J. et al. | 2008
- 1535
-
Solvent resistance and mechanical properties in thermoplastic elastomer blends prepared by dynamic vulcanizationVan Dyke, J. D. (Jack) / Gnatowski, Marek / Burczyk, Andrew et al. | 2008
- 1547
-
Mechanical and water sorption studies of ecofriendly banana fiber‐reinforced polyester composites fabricated by RTMSreekumar, P. A / Albert, Pradeesh / Unnikrishnan, G. et al. | 2008
- 1556
-
Influence of blending sequence on micro‐ and macrostructure of PA6/mEPDM/EPDMgMA blends reinforced with organoclayGallego, R. / García‐López, D. / López‐Quintana, S. et al. | 2008
- 1564
-
Entanglement network and relaxation temperature dependence of single‐site catalyzed ethylene/1‐hexene copolymersVega, J. F. / Martín, S. / Expósito, M. T. et al. | 2008
- 1570
-
Low potential electrodeposition of high‐quality and freestanding poly(3‐(6‐bromohexyl)thiophene) filmsXu, Jingkun / Wei, Zhenhong / Du, Yukou et al. | 2008
- 1577
-
Preparation of insoluble fibroin/collagen films without methanol treatment and the increase of its flexibility and cytocompatibilityLv, Qiang / Hu, Kun / Feng, Qingling et al. | 2008
- 1585
-
Effect of viscosity of shell solution on the content of solid powder as core material in microencapsulation by the drying‐in‐liquid methodYokoyama, Hiroshi / Mo, Liu / Taguchi, Yoshinari et al. | 2008
- 1594
-
Artificial aging and deterioration of oil‐painted Fabriano paper and cardboard paper supportsElfeky, Osama M. / Hassan, Mohammad L. et al. | 2008
- 1604
-
Study of monodispersed polystyrene colloidal particles containing fluorineLiu, Changsheng / Li, Jun et al. | 2008
- 1611
-
Preparation and physical properties of transparent organic–inorganic nanohybrid materials based on urethane dimethacrylateDaimatsu, Kazuki / Sugimoto, Hideki / Nakanishi, Eiji et al. | 2008
- 1618
-
Blends of high density polyethylene with branched poly(styrene‐co‐dodecyl acrylate): Rheological, mechanical, and thermal propertiesQiang, Ren / Fanghong, Gong / Dongliang, Zhang et al. | 2008
- 1625
-
“Ex situ” concept for toughening the RTMable BMI matrix composites, Part I: Improving the interlaminar fracture toughnessCheng, Qunfeng / Fang, Zhengping / Yi, Xiao‐Su et al. | 2008
- 1635
-
Miscibility, crystallization, and mechanical properties of poly(3‐hydroxybutyrate) and poly(propylene carbonate) biodegradable blendsYang, Dong Zhi / Hu, Ping et al. | 2008
- 1643
-
Electropolymerization kinetics of a binary mixture of pyrrole and o‐aminobenzoic acid and characterization of the obtained polymer filmsSayyah, S. M. / El‐Rabiey, M. M. / Abd El‐Rehim, S. S. et al. | 2008
- 1654
-
Mechanical properties and morphologies of polypropylene composites synergistically filled by styrene‐butadiene rubber and silica nanoparticlesWang, Wei‐Zhi / Liu, Tianxi et al. | 2008
- 1661
-
Investigation of sorption and diffusion of supercritical carbon dioxide in polycarbonateZhao, J. J. / Zhao, Y. P. / Yang, B. et al. | 2008
- 1667
-
Characterization of polymer‐brush‐type polysaccharide β‐ketoestersYoshida, Yutaka / Isogai, Akira et al. | 2008
- 1675
-
XPS and EXAFS characterization of Ziegler–Natta catalyst systemsda Silva Filho, Adilson Arli / Martins Alves, Maria do Carmo / dos Santos, João Henrique Zimnoch et al. | 2008
- 1684
-
Hybrid composite based on poly(vinyl alcohol) and fillers from renewable resourcesCinelli, Patrizia / Chiellini, Emo / Imam, Syed H. et al. | 2008
- 1692
-
Preparation and characterization of polymer‐based spherical activated carbons with tailored pore structureZhu, Zhaolian / Li, Aimin / Zhong, Sheng et al. | 2008
- 1699
-
Effect of graft modification with poly(N‐vinylpyrrolidone) on thermal and mechanical properties of poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)Wang, Wei / Zhang, Yu / Zhu, Meifang et al. | 2008
- 1708
-
Polyurethane foams with 1,3‐pyrimidine ringChmiel‐Szukiewicz, Elżbieta et al. | 2008
- 1714
-
Crystallization behavior and spherulite growth rate of isotactic polypropylene in isotactic polypropylene/natural rubber based thermoplastic elastomersJoseph, Aju / Koch, T. / Seidler, S. et al. | 2008
- 1722
-
Synthesis of 3′,4′‐disubstituted terthiophenes—Characterization and electropolymerization. II. 3′‐bromo‐4′‐thienyl‐2,2′:5′,2′‐terthiophene and 3′,4′‐diphenyl‐2,2′:5′,2′‐terthiophene in photovoltaic displaysVélez, J. H. / Díaz, F. R. / del Valle, M. A. et al. | 2008
- 1730
-
Comparative studies for the effect of dual‐ and mono‐organic modifiers on the physical properties of polyimide‐clay nanocomposite membranesLai, Mei‐Chun / Jang, Guang‐Way / Chang, Kung‐Chin et al. | 2008
- 1738
-
Preparation and characterization of a methyl methacrylate/ethyl acrylate/acrylic acid terpolymer to improve the homogeneity of ethylene–propylene–diene monomer rubber/poly(vinyl chloride) blendsBotros, S. H. / Moustafa, A. F. / Mansour, S. H. et al. | 2008
- 1746
-
A novel process to develop modified polymeric surfaces for the analysis of bacterial adhesion: Surface properties and adhesion testAnjum, N. / Bellon‐Fontaine, M.‐N. / Herry, J.‐M. et al. | 2008
- 1757
-
Properties of reactive hot melt polyurethane adhesives with acrylic polymer or macromonomer modificationsJung, Jin Su / Kim, Jae Hoon / Kim, Min Seok et al. | 2008
- 1764
-
Influence of pH on the specific surface area of polyaniline matricesChowdhury, Al‐Nakib / Saleh, Farhana Sultana / Rahman, Mohammad Rezaur et al. | 2008
- 1772
-
Preparation of unsaturated poly(ε‐caprolactone) with a new titanium alkoxide initiatorXia, Zhean / Zerroukhi, Amar / Chalamet, Yvan et al. | 2008
- 1781
-
Synthesis and viscosity of hydrophobically modified polymers containing dendritic segmentsAli, Shaikh A. / Umar, Yunusa / Al‐Muallem, Hasan A. et al. | 2008
- 1793
-
Effect of water on Bombyx mori regenerated silk fibers and its application in modifying their mechanical propertiesPlaza, Gustavo R. / Corsini, Paola / Pérez‐Rigueiro, José et al. | 2008
- 1802
-
Dendrimer‐encapsulated Pt nanoparticles/polyaniline nanofibers for glucose detectionXu, Lihuan / Zhu, Yihua / Tang, Longhua et al. | 2008
- 1808
-
Cationic copolymerization of epoxy siloxane monomer with liquid poly‐butadiene and its light emitting diode encapsulationMorita, Yasumasa / Tajima, Seitarou / Suzuki, Hiroshi et al. | 2008
- 1814
-
Preparation and characterization of poly(methyl methacrylate) beadsHolmes, Rohan L. / Burford, Robert P. / Bertram, Christopher D. et al. | 2008
- 1823
-
Preparation and characterization of fluorescent polymer magnetic particlesBaharvand, H. et al. | 2008
- 1829
-
Using COC as pharmaceutical or cosmetic storage material. II. Effect of electron beam radio‐sterilizationSaunier, J. / Aymes Chodur, C. / Leclerc, B. et al. | 2008
- 1840
-
Synthesis and thermomechanical characterization of polyurethane elastomers extended with α,ω‐alkane diolsZia, Khalid Mahmood / Barikani, Mehdi / Bhatti, Ijaz Ahmad et al. | 2008
- 1850
-
Electrokinetic and rheological behaviors of sepiolite suspensions in the presence of poly(acrylic acid sodium salt)s, polyacrylamides, and poly(ethylene glycol)s of different molecular weightsTunç, Sibel / Duman, Osman / Uysal, Ramazan et al. | 2008
- 1861
-
Synthesis and characterization of thermally stable polymers (polybenzimidazoles)Özaytekin, İlkay / Karataş, İbrahim et al. | 2008
- 1871
-
PPgMA/APTS compound coupling compatabilizer in PP/clay hybrid nanocompositeLiaw, Wen‐Chang / Huang, Po‐Chen / Chen, Chee‐Shan et al. | 2008
- 1881
-
Synthesis and characterization of biodegradable poly(butylene succinate‐co‐propylene succinate)sXu, Yongxiang / Xu, Jun / Liu, Dehua et al. | 2008
- 1890
-
Study of degradation of organic coatings in seawater by using EIS and AFM methodsZhang, Feng / Liu, Jingjun / Li, Xiaoyu et al. | 2008
- 1900
-
Rate transitions in the fatigue crack growth of elastomersPapadopoulos, I. C. / Thomas, A. G. / Busfield, J. J. C. et al. | 2008
- 1911
-
Novel waterborne polyurethanes containing short fluoroalkyl chains: Synthesis and applications on cotton fabricsZhu, Ming‐Jie / Qing, Feng‐Ling / Meng, Wei‐Dong et al. | 2008
- 1916
-
Effect of glycol and filler types on some polymeric composite propertiesAsaad, J. N. / Abd‐El‐Messieh, S. L. et al. | 2008
- 1925
-
The role of rubber characteristics in preparing rubber/clay nanocomposites by melt compoundingMa, Yong / Wu, You‐Ping / Zhang, Li‐Qun et al. | 2008
- 1935
-
Flame retardancy of hollow glass microsphere/rigid polyurethane foams in the presence of expandable graphiteBian, Xiang‐Cheng / Tang, Jian‐Hua / Li, Zhong‐Ming et al. | 2008
- 1944
-
Effects of coagulation processes on properties of epoxidized natural rubberZong‐Qiang, Zeng / He‐Ping, Yu / Qi‐Fang, Wang et al. | 2008
- 1950
-
Antifoaming performance of polysiloxanes modified with fluoroalkyls and polyethersWu, Fei / Cai, Chun / Yi, Wen‐Bin et al. | 2008
- 1955
-
Preparation and evaluation of two kinds of solid polymer electrolytes made from crosslinked poly(ether urethane) elastomers consisting of a comb‐like and a hyperbranched polyetherYe, Lin / Gao, Peng / Zhao, Yu‐mei et al. | 2008
- 1962
-
The influence of 4HB content on the properties of poly(3‐hydroxylbutyrate‐co‐4‐hydroxylbutyrate) based on melt molded sheetsCong, Chuanbo / Zhang, Suyun / Xu, Riwei et al. | 2008
- 1968
-
Synthesis, extraction, and adsorption properties of calix[4]arene‐poly(ethylene‐glycol) crosslinked polymerZhu, Weipu / Gou, Pengfei / Zhu, Kui et al. | 2008
- 1974
-
Honeybee corpses as an available source of chitinDraczynski, Zbigniew et al. | 2008
- 1982
-
Studies on preparation and properties of porous biodegradable poly(NIPAAm) hydrogelsLee, Wen‐Fu / Cheng, Tzu‐Shen et al. | 2008
- 1993
-
The properties of polyolefins modified with PET powderJakubowska, P. / Sterzyński, T. / Królikowski, B. et al. | 2008
- 2000
-
Morphological, electrical, and mechanical properties of multiwall carbon nanotube/polysilsesquioxane compositeYuen, Siu‐Ming / Ma, Chen‐Chi M. et al. | 2008
- 2008
-
Characterization of an alkali‐treated grass fiber by thermogravimetric and X‐ray crystallographic analysisDe, Debasish / De, Debapriya et al. | 2008
- 2016
-
Effects of molding pressure on the warpage and the viscoelasticities of HVQFN packagesGui, D. Y. / Ernst, L. J. / Jansen, K. M. B. et al. | 2008
- 2023
-
Cure behavior of epoxy‐cyanate ester blend in composite systems: Evaluation studies in neat resin cast by thermal and FTIR techniquesRavi Sekhar, K. / Kishore / Sankaran, S. et al. | 2008
- 2029
-
Miscible polyisoprene/polybutadiene blends: Relationship between average statistical segment length and vinyl contentAmbler, Michael R. et al. | 2008
- 2043
-
Pervaporation dehydration of isopropyl alcohol with NaY zeolite incorporated hybrid membranesKulkarni, Srikant S. / Kittur, Arjumand A. / Kariduraganavar, Mahadevappa Y. et al. | 2008
- 2054
-
Electromagnetic interference shielding effectiveness of graphite‐filled polypropylene and poly(ether imide) based compositesSawai, Pravin / Banerjee, Susanta et al. | 2008