Advances in powder metallurgy & particulate materials - 2001 : proceedings of the 2001 International Conference on Powder Metallurgy & Particulate Materials; May 13-17th, New Orleans / sponsored by the Metal Powder Industries Federation .̤ Comp. by William B. Eisen .̤ ; Pt. 9: Composites, laser fabrication, mechanical alloying, nanocrystalline materials, aluminum (Englisch)
- Neue Suche nach: Metal Powder Industries Federation
- Weitere Informationen zu Metal Powder Industries Federation:
- http://d-nb.info/gnd/2216-0
- Neue Suche nach: International Conference on Powder Metallurgy and Particulate Materials
- Weitere Informationen zu International Conference on Powder Metallurgy and Particulate Materials:
- http://d-nb.info/gnd/6091410-5
- Neue Suche nach: Eisen, William B.
- Neue Suche nach: Metal Powder Industries Federation
- Weitere Informationen zu Metal Powder Industries Federation:
- http://d-nb.info/gnd/2216-0
- Neue Suche nach: International Conference on Powder Metallurgy and Particulate Materials
- Weitere Informationen zu International Conference on Powder Metallurgy and Particulate Materials:
- http://d-nb.info/gnd/6091410-5
2001
-
ISBN:
- Konferenzband / Print
-
Titel:Advances in powder metallurgy & particulate materials - 2001 : proceedings of the 2001 International Conference on Powder Metallurgy & Particulate Materials; May 13-17th, New Orleans / sponsored by the Metal Powder Industries Federation .̤ Comp. by William B. Eisen .̤ ; Pt. 9: Composites, laser fabrication, mechanical alloying, nanocrystalline materials, aluminum
-
Beteiligte:
-
Kongress:International Conference on Powder Metallurgy & Particulate Materials ; 2001 ; 2001 ; New Orleans, La.
PM2TEC 2002 ; 2001 ; New Orleans, La. -
Verlag:
- Neue Suche nach: Metal Powder Industries Federation
-
Erscheinungsort:Princeton, NJ
-
Erscheinungsdatum:2001
-
Format / Umfang:IV, 197 S
-
ISBN:
-
Medientyp:Konferenzband
-
Format:Print
-
Sprache:Englisch
- Neue Suche nach: 51.45 / 58.41 / 52.77
- Weitere Informationen zu Basisklassifikation
-
Schlagwörter:
-
Klassifikation:
-
Datenquelle:
Inhaltsverzeichnis Konferenzband
Die Inhaltsverzeichnisse werden automatisch erzeugt und basieren auf den im Index des TIB-Portals verfügbaren Einzelnachweisen der enthaltenen Beiträge. Die Anzeige der Inhaltsverzeichnisse kann daher unvollständig oder lückenhaft sein.
- 1
-
P/M Part Design from FEM to Production Line with Quantitative Resonant InspectionNath, R. H. / Saxton, J. / Schwarz, J. et al. | 2001
- 1
-
Finite Element Analysis for the Solid Phase Sintering of BronzeZhang, R. / Liu, Y. / Salamon, N. J. / German, R. M. / Engel, R. S. et al. | 2001
- 1
-
The Effect of Variations in HIP Cooling Rate on the Microstructure and Properties of a P/M Duplex Stainless SteelMashl, S. J. / Hall, J. D. et al. | 2001
- 1
-
Simulation of Compaction Cracks in Parts with Large Variation in Cross SectionAshok, S. / Sriram, S. / Kumar, R. K. / Beiss, P. et al. | 2001
- 1
-
Experimental Characterization and Numerical Simulation of Die Wall Friction in Pharmaceutical Powder CompactionSinka, I. C. / Cunningham, J. C. / Zavaliangos, A. et al. | 2001
- 1
-
Comparsion of theoretical prediction and experimental results of the density of compacted powder using a neural networkGuerin, V. / Bowen, P. / Hofmann, H. et al. | 2001
- 1
-
Cap Soil Plasticity Model for Silicon Carbide Powder Compaction and Its Finite Element ImplementationDollar, A. / Chang, J.-Y. / Nair, S. et al. | 2001
- 1
-
Process Modeling of Thermal DebindingAtre, S. V. / Kuhar, A. J. / Cronin, K. / German, R. M. et al. | 2001
- 1
-
State-of-the North American P/M IndustryWhite, D. G. et al. | 2001
- 1
-
Modeling of Porous Materials Deformation Process and Model Identification in ExperimentEfros, B. M. / Varyukhin, V. N. / Shishkova, N. V. / Beygelzimer, Y. E. et al. | 2001
- 1
-
Comparison of Theoretical Prediction and Experimental Results of the Density of Compacted Powder Using a Neural NetworkGuerin, V. / Bowen, P. / Hofmann, H. et al. | 2001
- 2
-
Sonic Sieving: An Accurate Particle Size Measurement Technique for Gas-Atomized PowderConway, J. J. / Wojcieszynski, A. L. et al. | 2001
- 2
-
A New Approach for Recycling of Scrap Iron with Copper by Powder Metallurgical TechniqueKakisawa, H. / Minagawa, K. / Halada, K. et al. | 2001
- 2
-
Towards the Quantification of Atomization EfficiencyStrauss, J. T. / Miller, S. A. et al. | 2001
- 2
-
Effect of molten metal filtration on gas atomized modified AISI Type M4 powder metallurgy high-speed steelSchmidt, M.L. / Norris, D.A. et al. | 2001
- 2
-
Artifacts in Qualitative X-Ray Microanalysis of Loose PowderLorcharoensery, S. K. / Bandar, A. R. / Misiolek, W. Z. et al. | 2001
- 2
-
High Kinetic Processing of Enamel, Part IZoz, H. / Benz, H. U. / Schafer, G. / Dannehl, M. / Krull, J. / Kaup, F. / Ren, H. / Reichardt, R. et al. | 2001
- 2
-
Approaches for Increased Process Uniformity in Gas AtomizationAnderson, I. E. / Terpstra, R. L. et al. | 2001
- 2
-
Applications of Ultrafine Gas Atomized Metal PowdersSchulz, G. et al. | 2001
- 2
-
Powder Body Deformability CriterionVaryukhin, V. M. / Beygelzimer, Y. E. / Spuskanyuk, A. V. et al. | 2001
- 2
-
Application of Two Phase Flow Aspiration Pressure Calculations for Improved Close-Coupled Nozzle PerformanceMiller, S. A. / Strauss, J. T. et al. | 2001
- 2
-
Production and Characterization of P/M Grade Sponge Iron Powder from Indian Blue DustBagchi, T. P. / Malewar, R. / Sharma, B. / Chandra, S. / Bose, A. et al. | 2001
- 2
-
Melt Film Atomization: Effect of Gas Backpressure in the Spraying Tower on the Powder Particle SizeSchulz, G. et al. | 2001
- 2
-
Rapidly Solidified Controlled Shape Particles and Their Commercial UsesMaringer, R. E. / Ollila, R. G. et al. | 2001
- 2
-
The Role of Energy in Gas AtomizationDunkley, J. J. et al. | 2001
- 2
-
Outgassing Measurements of Cu Powder, Cr Powder and Their MixtureLi, W. / Thomas, R. L. / Haskins, R. E. / Rubel, A. M. et al. | 2001
- 2
-
Approaches for increased process unformity in gas atomizationAnderson, I.E. / Tepstra, R.L. et al. | 2001
- 2
-
Influence of aspiration base pressure on melt atomizationTing, J. / Eisen, W.B. / Peretti, M.W. et al. | 2001
- 2
-
Effect of Molten Metal Filtration on Gas Atomized Modified AISI Type M4 Powder Metallurgy High-Speed Steel PowderSchmidt, M. L. / Norris, D. A. et al. | 2001
- 3
-
Complexable Polymeric Binder-Lubricant BlendsThomas, Y. / Cole, K. C. / Tremblay, L. et al. | 2001
- 3
-
Enhancing Green Strength of P/M MaterialsTremblay, L. / Chagnon, F. / Thomas, Y. et al. | 2001
- 3
-
Microstructure, Property and Deformation Response of IN718 Produced by Centrifugal Spray DepositionBarratt, M. D. / Jacobs, M. H. / Dowson, A. L. et al. | 2001
- 3
-
Spray Forming of CuSn13...17Ohla, K. D. / Muller, H. / Keppeler, M. et al. | 2001
- 3
-
Influence of Powder Mix Formulation on Green and Sintered Properties of Warm Pressed SpecimensSt-Laurent, S. / Chagnon, F. et al. | 2001
- 3
-
Centrifugal Spray Deposition (CSD) - An Alternative Route for the Manufacture of Ring ComponentsDowson, A. L. / Jacobs, M. H. / Barratt, M. D. et al. | 2001
- 3
-
A new device for measurement of friction during metal powder compactionSolimanjad, N. / Wikström, H. / Larsson, R. et al. | 2001
- 3
-
A New Device for Measurement of Friction in Metal Powder CompactionSolimanjad, N. / Wikstrom, H. / Larsson, R. et al. | 2001
- 3
-
Higher Green Strength Enhancements to Increase Process RobustnessLuk, S. H. / Narasimhan, K. S. / Winterton, P. J. / Pfingstler, T. / Russell, S. et al. | 2001
- 3
-
Segregation-free Iron Powder with Improved Flowability Containing Wax LubricantUenosono, S. / Ozaki, Y. / Ogura, K. et al. | 2001
- 3
-
Dust-Proof Robotics for Powdered Metal and Ceramic Press UnloadingHarrington, J. / Monnin, M. et al. | 2001
-
A New Approach to Die Wall Lubrication for P/M ApplicationsLemieux, P. / Pelletier, S. / Mongeon, P. E. / Thomas, Y. / Lefebvre, L. P. / Chagnon, F. et al. | 2001
- 3
-
Die Wall Lubrication, Consistency and ReliabilityGasbarre, G. P. et al. | 2001
- 3
-
The Effects of Non-Uniform Fill on Green Density Distributions in Hollow Cylindrical P/M CompactsRichman, M. W. / Khambekar, J. et al. | 2001
- 3
-
Engineering Approach to High Density Forming Using Internal and External LubricantsRawlings, A. / Luk, S. / Hanejko, F. et al. | 2001
- 3
-
Stainless Steel Powders for High Density ApplicationsBergkvist, A. et al. | 2001
- 3
-
Investigation of the Pressure Distribution in Powder Beds During Cold Isostatic Pressing (CIP)Weimar, P. / Liepelt, H. / Iwanek, H. et al. | 2001
- 3
-
Sintered Stainless Steel Obtained by Pressureless Forming: Microstructural CharacterizationDiMaggio, R. / Gialanella, S. / Molinari, A. et al. | 2001
- 3
-
Sprayforming of MMC - Study on the Particle Distribution in CuNi2Si Billets with GraphiteSchneider, A. / Uhlenwinkel, V. / Wriedt, T. / Harig, H. / Bauckhage, K. et al. | 2001
- 3
-
New Generation of Tool Steels Made by Spray FormingSpiegelhauer, C. / Sandberg, O. et al. | 2001
- 3
-
CPA technology permits combined use of withdrawal and counter-pressure processNies, N. et al. | 2001
- 3
-
Sprayforming of MMC - study of the particle distribution in CuNi2Si billets with graphiteSchneider, A. / Uhlenwinkel, V. / Wriedt, T. / Harig, H. / Bauckhage, K. et al. | 2001
- 3
-
The Interaction of Graphite with Today's Popular LubricantsMoyer, K. H. / Derwin, D. et al. | 2001
- 3
-
Green Properties Improvements By Mixing Techniques Part 3Edwards, R. L. / Roy, L. G. et al. | 2001
- 3
-
CPA Technology Permits Combined Use of the Withdrawal and Counter-Pressure ProcessNies, N. et al. | 2001
- 3
-
Applications of Industrial Robots in Powder Metal Component ManufacturingMorris, J. R. et al. | 2001
- 4
-
Titanium Powder Injection MoldingLaVoie, L. et al. | 2001
- 4
-
The Effect of Powder Particle Size and Alloying Technique on Distortion in MIM PartsWhychell, D. T. et al. | 2001
- 4
-
Effects of Carbide Addition on Sintering of M-2 Tool SteelZhang, H. / Heaney, D. F. / German, R. M. et al. | 2001
- 4
-
Powder Injection Molding of Bi-Metal ComponentsTan, L.-K. / Baumgartner, R. / German, R. M. et al. | 2001
- 4
-
The effect of powder particle size & alloying technique on distortion in MIM partsWhychell, D.T. et al. | 2001
- 4
-
Recyclability of a Commercial MIM FeedstockKulkarni, K. M. / Kolts, J. B. et al. | 2001
- 4
-
Aerospace Valve Flow Body in IN718 by Agar Based Metal Injection MoldingBarton, K. / Das, S. / Lu, J. / Goldenberg, M. / Olsen, D. / LaSalle, J. et al. | 2001
- 4
-
Metal Injection Molding: Mold Filling and Packing DynamicsStevenson, J. F. / Roser, R. / Ilinca, F. / Derdouri, A. / Kozlov, A. S. et al. | 2001
- 4
-
Tiny Parts Made by Micro Powder Injection MoldingPiotter, V. / Gietzelt, T. / Ruprecht, R. / Hausselt, J. et al. | 2001
- 4
-
A Microstructural Model for Feedstock HomogeneityAtre, S. V. / Scott, C. / Thomas, J. A. / German, R. M. et al. | 2001
- 4
-
Binder Selection for PIM of Water AtomizedMyers, N. / German, R. M. et al. | 2001
- 4
-
Metal Injection Molding of Tungsten and Molybdenum Copper Alloys for Microelectronic PackagingPetzoldt, F. / Knuwer, M. / Wichmann, K.-H. / De Cristofaro, N. et al. | 2001
- 4
-
MIM Process of Ti-Al-Cr and Ti-Al-Cr-Nb Intermetallic CompoundsShimizu, T. / Kitajima, A. / Sano, T. / Kato, K. / Masui, T. et al. | 2001
- 4
-
Effect of Atmosphere Pressure on Thermal Debinding BehaviorGrohowski, J. A. / Strauss, J. T. et al. | 2001
- 4
-
CAE Analysis for Sintering Stage of Powder Injection MoldingKwon, Y.-S. / Chung, S.-H. / Ahn, H.-K. / Chung, S.-T. / Chung, S.-J. / Park, S.-J. / Yoon, D. T.-S. / Choi, J.-Y. / Kim, K. T. / Park, L.-J. et al. | 2001
- 4
-
Development of a Process for Microporous ComponentsDwivedi, R. / Anderson, G. / Taggart, P. / Fauerbach, J. et al. | 2001
- 4
-
Water Soluble Binders for Large Volume MIM ProductionPetcavich, B. et al. | 2001
- 4
-
Effects of Processing Parameters on the Impact Toughness of MIM PartsSago, J. A. / Newkirk, J. W. et al. | 2001
- 4
-
Effect of carbide addition on sintering of M2 tool steelZhang, H. / Heaney, D.F. / German, R.M. et al. | 2001
- 4
-
An Analysis of the Powder Injection Molding Industry Global MarketCornwall, R. G. / German, R. M. et al. | 2001
- 4
-
Evaluation of High Pressure Water Atomized Powders for Large Scale PIM Production by Using Different Binder FormulationsArnhold, V. / De Cristofaro, N. / Hamill, J. et al. | 2001
- 4
-
Rheological Properties of MIM Feedstocks Produced from Gas and Water Atomized 316L Stainless Steel PowdersKaratas, C. / Saritas, S. et al. | 2001
- 4
-
Correlation Between Different Sourced Rheological Feedstock Data for a Quality Controlled MIM-ProductionQuirmbach, P. / Schwartz, S. / Kraus, M. et al. | 2001
- 4
-
Low Contamination Binders for Reaction Sensitive Alloy ApplicationsSchofalvi, K.-H. et al. | 2001
- 4
-
Gel Strengthening Additives for Agar Based Binder System for Metal and Ceramic Injection Molding FeedstockBehi, M. et al. | 2001
- 5
-
Microstructure Manipulations to Attain Densification without Distortion During Liquid Phase SinteringYi, W. / German, R. M. / Xu, X. et al. | 2001
- 5
-
Continuous Sintering of Ni~3Al, NiCrFe-TiC IntermetallicsWittmer, D. E. / Goransson, F. L. / Woods, A. / Menchhofer, P. A. / Tiegs, T. N. et al. | 2001
- 5
-
Presintering Effects on Tungsten Heavy Alloy Liquid Phase SinteringLu, P. K. / German, R. M. et al. | 2001
- 5
-
Enhanced Sinter-hardened Ni-Mo Prealloy P/M Component Characteristics Through Powder Composition and ProcessingEjiofor, J. U. / Haas, M. R. / Suzuki, H. et al. | 2001
- 5
-
Thermal Expansion Behavior of P/M Ferrous MaterialsBocchini, G. F. / Rivolta, B. / Silva, G. et al. | 2001
- 5
-
Furnace Atmosphere Optimization for Sinter-HardeningSerafini, R. E. / Blais, C. et al. | 2001
- 5
-
Improved Delubrication by the Addition of Endothermic Gas in N~2-H~2 AtmosphereSchaberl, J. / Jiang, G. / Forster, J. R. et al. | 2001
- 5
-
Mechanical Properties of Sintered Iron-Boron AlloysSuri, P. K. / German, R. M. et al. | 2001
- 5
-
Comparison of Pressed and Thixotropicly Cast PlatesCosta, W. / Cloud, J. / Shah, S. et al. | 2001
- 5
-
Continuous sintering of Ni3Al, NiCr and NiCrFe-TiC intermetallicsWittmer, D.E. / Goransson, F.L. / Woods, A. / Menchhofer, P. / Tiegs, T.N. et al. | 2001
- 5
-
Effects of Chemical Composition of Pure Iron on Dimensional Change of Sintered P/M PartsEjiofor, J. U. / Haas, M. R. et al. | 2001
- 5
-
Sintering Cycle Design and Evaluation of High Speed Steel Starch Shaped PartsMagalhaes, S. M. S. / Nyborg, L. / Lyckfeldt, O. / Nordberg, L.-O. et al. | 2001
- 5
-
Control of Sintered Properties of Fe-P Alloys by Adjusting Sintering ParametersHu, B. et al. | 2001
- 5
-
P/M Steel Suitable for Sinter Hardening in Respect of Cost and PerformanceBerg, S. et al. | 2001
- 5
-
Dimensional Properties of the Mix FC-0208 with Different Copper AdditionAshok, S. / Ramesh, N. / Kennedy, A. X. et al. | 2001
- 5
-
Advanced Processing of Sinter-Hardening MaterialsHaberberger, T. / Hanejko, F. / Baran, M. et al. | 2001
- 5
-
Control of De-Lubrication Utilizing a Logistic Function Based Empirical ModelSaha, D. / Apelian, D. et al. | 2001
- 5
-
Dimensional Control of Sinter Hardened P/M ComponentsChagnon, F. / Gagne, M. et al. | 2001
- 5
-
Sintering Furnace Cycle Influence on Sinter Hardened Part ParametersMcLelland, J. / Mars, O. / Jesberger, T. J. et al. | 2001
- 5
-
Use of Dry Vacuum Pumps for Sintering Binder RemovalPatil, A. N. et al. | 2001
- 5
-
Mechanism of De-Lubrication During Sintering: Reaction Kinetics and Decomposition StagesSaha, D. / Baum, M. M. / Apelian, D. et al. | 2001
- 5
-
On Sintering with Rigid InclusionsSayadi, B. / Olevsky, E. A. et al. | 2001
- 5
-
Dimensional Changes During Sintering of Bearing Caps - Effects of Method of Alloying AdditionAshok, S. / Ramesh, N. / Kennedy, A. X. et al. | 2001
- 5
-
On the Sintering of TiC-VC-Co HardmetalsArenas, F. J. / Sepulveda, R. et al. | 2001
- 5
-
A Methodology for Evaluating Sinter-Hardening CapabilityPershing, M. A. / Nandi, H. et al. | 2001
- 5
-
Sintering of tin and aluminium bronze: plasma versus conventional mechanismsAlves, C. jun. / Maia, S.F. / Da Silva, A.G.P. / Sinka, V. et al. | 2001
- 5
-
Improved delubrication by the addition of endothermic gas in H2-N2 atmosphereSchaberl, J. / Jiang, G. / Forster, J. et al. | 2001
- 5
-
Processes Determining the Dimensional Change of P/M SteelsSemel, F. J. et al. | 2001
- 5
-
Vacuum Furnace Sinter HardeningMoyer, K. H. / Jones, W. R. et al. | 2001
- 5
-
The Influence of Sintering Atmosphere on the Microstructure of Rapidsteel 2.0 MaterialsChang, I. T. / Uzunsoy, D. / Bowen, P. et al. | 2001
- 5
-
Sintering of Tin and Aluminum Bronze: Plasma Versus Conventional MechanismsAlves, C. / Maia, S. F. / da Silva, A. G. P. / Sinka, V. et al. | 2001
- 6
-
The Effect of Surface Modification on the Fatigue Performance of Powder-Forged SteelChernenkoff, R. A. et al. | 2001
- 6
-
Plasma Nitriding of C-Alloyed Astaloy CrM Processed in Different ConditionsMolinari, A. / Puscas, T. M. / Straffelini, G. / Yu, Y. et al. | 2001
- 6
-
Overview of Surface Treatment Methods for P/M PartsBocchini, G. F. et al. | 2001
- 6
-
Optimization of Pre-Alloyed MnS Steel Powders for Improved MachinabilityPlamondon, P. / L Esperance, G. / Blais, C. et al. | 2001
- 6
-
Minimizing Environmental Effects in AluminidesRasouli, F. / Scorey, C. R. et al. | 2001
-
Green Turning of Warm Compacted P/M SteelsBenner, A. / Beiss, P. et al. | 2001
- 6
-
Tensile, machinability, and fatigue properties of pre-alloyed, free cutting steel powderAkagi, N. / Haas, M. / Sato, M. / Seki, Y. et al. | 2001
- 6
-
Post-Delubrication Peening of Forged P/M Connecting RodLiu, F. / Hathaway, A. et al. | 2001
- 6
-
Machining of Warm Compacted PM-Parts in Green StateAndersson, O. / Benner, A. et al. | 2001
- 6
-
Investigating the Relationship Between Machinability Additives and Machining ParametersBerg, S. / Mars, O. et al. | 2001
- 6
-
Diffusion Welding of P/M Bronze Bearings to a Rolled Plain Carbon SteelKurt, A. / Saritas, S. et al. | 2001
- 6
-
Tensile, Machinability and Fatigue Property of Pre-alloyed Free Cutting Steel PowderAkagi, N. / Haas, M. / Sato, M. / Seki, Y. et al. | 2001
- 7
-
Mechanism of Delamination Cracks in High Density PartsAshok, S. / SundarSriram, S. / KrishnaKumar, R. / Beiss, P. et al. | 2001
- 7
-
Effect of material insulation and part geometry on AC magnetic performance of P/M soft magnetic compositesLefebvre, L.P. / Gelinas, C. et al. | 2001
- 7
-
Influence of Sintering Temperature on Properties of Low Alloyed High Strength P/M MaterialsEngstrom, U. et al. | 2001
- 7
-
Reentrant Transport Transition in Sintered Superconductors with High Critical TemperatureAkinaga, M. et al. | 2001
- 7
-
Development of Low-Coercivity Soft Magnetic Materials from Sponge Iron PowderBagchi, T. P. / Sharma, B. / Sahoo, K. C. / Bose, A. et al. | 2001
- 7
-
Soft Magnetic Powdered Metal Materials for High Frequency Industrial ApplicationsNemkov, V. S. / Goldstein, R. C. / Ruffini, R. T. et al. | 2001
- 7
-
Effect of Contamination Level and Sintering Temperature On the Corrosion Resistance of P/M 316L Stainless SteelSamal, P. K. / Terrell, J. B. et al. | 2001
- 7
-
Effects of Ordering Transformation and Grain Size on the Magnetic Properties of Fe-Co AlloyHong, S. S. / Kim, D.-G. / Do Kim, Y. / Lee, K. H. et al. | 2001
- 7
-
Comparison of Mechanical Properties for Conventional vs. High Temperature Sintering of FLN2-4405 Low Alloy SteelSanderow, H. I. et al. | 2001
- 7
-
A New Powder Metal with Mechanical Properties Approaching Low Carbon SteelFleming, T. G. / Alcini, W. V. et al. | 2001
- 7
-
Effect of sintering atmosphere on the corrosion resistance and mechanical properties of austenitic stainless steels - part IISamal, P.K. / Terrell, J.B. / Klar, E. et al. | 2001
- 7
-
High Performance Materials Ancoroly MD SeriesShah, S. O. / Baran, M. C. / Patel, S. N. / Causton, R. J. et al. | 2001
- 7
-
An Evaluation of Methods for Improving the Green Properties of P/M Stainless SteelsReinshagen, J. H. / Mason, R. P. et al. | 2001
- 7
-
Influences of composition on thermo-mechanical properties of TiNi shape memory alloy fabricated by spark-plasma sinteringKyogoku, H. / Tanbo, T. / Yokota, M. / Komatsu, S. / Yoshida, F. / Sakuma, T. / Iwata, U. et al. | 2001
- 7
-
Silicon Containing High Performance Alloys Machinability and Mechanical PropertiesBaran, M. / Causton, R. J. / Sweet, J. F. et al. | 2001
- 7
-
Current Trends of P/M Superalloys Discs Production for Gas Turbine EnginesGaribov, G. S. et al. | 2001
- 7
-
Fine Pitch Powder Metal Gears Using Stainless Steel AlloysBaker, S. / Foster, M. / Sanderow, H. et al. | 2001
- 7
-
Effect of Sintering Temperature on NdFeB Permanent Magnetic MaterialsSaleh, M. H. / Mohammad, M. / Hussain, P. / Idris, A. et al. | 2001
- 7
-
Titanium P/M - An OverviewFroes, F. H. et al. | 2001
- 7
-
Effect of contaminant level and sintering temperature on the corrosion resistance of P/M 316L stainless steelSamal, P.K. / Terrell, J.B. et al. | 2001
- 7
-
P/M High Strength Magnetic Alloys Igor Gabrielov, Christopher Wilson, Tim WeilbakerBarrows, A. / Hanejko, F. / Ellis, G. et al. | 2001
- 7
-
P/M Titanium Technology for Metal Matrix CompositesMoll, J. H. et al. | 2001
- 7
-
Effect of Sintering Atmosphere on Corrosion Resistance and Mechanical Properties of Austenitic Stainless Steels - Part IISamal, P. K. / Terrell, J. B. / Klar, E. et al. | 2001
- 7
-
Iron Powder in Electrical Machines, Possibilities and LimitationsAndersson, O. / Jack, A. G. et al. | 2001
- 7
-
Effect of Material Insulation and Part Geometry on AC Magnetic Performances of P/M Soft Magnetic CompositesLefebvre, L. P. / Gelinas, C. et al. | 2001
- 8
-
Densification of Cermet CompositesMa, J. / Olevsky, E. A. / Meyers, M. A. et al. | 2001
- 8
-
Metal Foams for Improved Crash Energy Absorption in Passenger EquipmentYu, C.-J. / Claar, T. D. / Adkins, J. / Eifert, H. et al. | 2001
- 8
-
Modeling the Compaction and Sintering of RheniumPandheeradi, M. / Casagranda, A. / Gurson, A. / Trybus, C. / Leonhardt, T. et al. | 2001
- 8
-
High-Porous Nickel with Cellular StructureLibenson, G. A. / Lopatin, V. Y. / Komarnitsky, G. V. et al. | 2001
- 8
-
Abrasive Wear Properties of Cr-Cr~3Si and Cr-Cr~3Si-X CompositesNewkirk, J. W. / Hawk, J. A. et al. | 2001
-
Microwave Sintering of TiC-Based CermetsTiegs, T. N. / Kiggans, J. / Menchofer, P. et al. | 2001
- 8
-
The Effect of Ni Contents on the Activated Sintering of Sub-Micron Tungsten Powder CompactWon, D. M. / Kim, S.-W. / Kim, Y.-D. / Moon, I.-H. et al. | 2001
- 8
-
Powder Injection Molding to Fabricate Tungsten and Rhenium ComponentsWang, C. / Cardarella, J. / Miller, K. R. / Trybus, C. et al. | 2001
- 8
-
Thick Coating of Boride Cermets on Steel PartsHamashima, K. / Sato, K. et al. | 2001
- 8
-
Fabrication of Ti-Based Components with Controlled PorosityKupp, D. M. / Claar, D. / Stephani, G. / Waag, U. et al. | 2001
- 8
-
Investigation of Syntactic Foam-Type Porous Powder MaterialsLibenson, G. A. / Lopatin, V. Y. et al. | 2001
- 8
-
Development of Metallic Hot Gas FiltersTerpstra, R. L. / Anderson, I. E. / Gleeson, B. et al. | 2001
- 8
-
Advances in Powder Metallurgy RheniumLeonhardt, T. A. / Moore, N. E. / Downs, J. J. / Hamister, M. et al. | 2001
- 8
-
Sintering Behavior of W-Cu Composite Powders Produced by High Energy Ball Milling and Reduction MethodDo Kim, Y. / Shim, W.-S. / Kim, D.-G. / Kim, E.-P. et al. | 2001
- 8
-
Double Cemented Carbide Composite--A Novel Composite ConceptDeng, X. / Patterson, B. R. / Chawla, K. K. / Koopman, M. C. / Fang, Z. / Lockwood, G. / Griffo, A. / Bitler, J. et al. | 2001
- 8
-
The Bonding of Wear-Resistant Tungsten Carbide-Cobalt Coatings Onto Steel Tooling Using the Electroconsolidation® ProcessMerkle, B. D. / Goldberger, W. M. / Borton, J. M. et al. | 2001
- 8
-
Ball Milling of Tungsten AlloysTaillard, R. / Avettand-Fenoel, M.-N. / de Figueiredo, R. S. / Dhers, J. / Parmentier, P. / Foct, J. et al. | 2001
- 8
-
Tough-Coated Hard Powders for Hardmetals of Novel PropertiesToth, R. E. / Smid, I. / Sherman, A. / Ettmayer, P. / Kladler, G. / Korb, G. et al. | 2001
- 8
-
Engineered Composite PowdersSherman, A. J. / Smith, G. / Baker, D. et al. | 2001
- 8
-
Co-Firing of Multilayer Ceramic CompositesArterberry, J. H. / Olevsky, E. A. / Tikare, V. et al. | 2001
- 8
-
Porous Stainless Steel Parts Using Selective Laser SinteringHeaney, D. F. / German, R. M. et al. | 2001
- 8
-
Thermal Conductivity of W-Cu Manufactured by Several TechniquesShields, J. A. / Mariella, G. / Reis, H.-H. et al. | 2001
- 9
-
Influence of the Alloy Composition and the Parameters of Deformation on the Coefficient of Linear Expansion of Powder Aluminum-Silicon AlloysSverdlin, A. V. / Litvintsev, A. V. / Shmakov, Y. V. et al. | 2001
- 9
-
Sintering of Aluminum Flakes for Lightweight ApplicationsMyers, N. S. / German, R. M. et al. | 2001
- 9
-
Tensile Properties of Pure AL based Al-Cu-Fe Quasicrystal Reinforced Model MMCTang, F. / Anderson, I. E. / Biner, S. B. / Foley, J. C. et al. | 2001
- 9
-
Reduced Pressure Requirements for Production of Nanoceramic CompositesColaizzi, J. / Mayo, W. E. / Kear, B. H. / Zhou, X. et al. | 2001
- 9
-
Effects of Heat Treatment, Reinforcement Type and Volume Fraction on Fracture During Temperature Tension Testing of Al-Si-Mg Alloy Reinforced with Ti-Al IntermetallicsMartinez, N. / Salvador, M. D. / Amigo, V. / Edil, C. / Vercher, A. et al. | 2001
- 9
-
Effect of Ni Addition to the Formation and Crystallization of Mechanically Alloyed Amorphous FeZrB PowdersChang, I. / Liu, Y. et al. | 2001
- 9
-
Synthesis of Al~2O~3/Cu Nanocomposite by Dispersion and Reduction of Cu OxideSuk, M.-J. / Min, K. H. / Do Kim, Y. / Moon, I.-H. et al. | 2001
- 9
-
Direct Laser Fabrication of a Burn-Resistant Ti AlloyWu, X. / Mei, J. / Sharman, R. / Loretto, M. H. / Voice, W. et al. | 2001
- 9
-
Direct Steel Component Manufacturing Using Direct Metal Laser SinteringKotila, J. / Nyrhila, O. / Syvanen, T. / Lind, J.-E. et al. | 2001
- 9
-
High-Speed Superplastic Forming of Consolidated Nanocrystalline PSZ-Al~2O~3Kimura, H. / Aji, C. M. / Kikuchi, K. et al. | 2001
- 9
-
Preliminary Evaluation of Dispersion Strengthened Copper-2B~4C AlloyLopez, M. L. / Camurri, C. G. / Vergara, V. E. / Jimenez, J. A. et al. | 2001
- 9
-
Iron and Microstructural Development During Sintering of Al-Cu-Mg AlloysMcPhee, W. A. / Drennan, J. / Schaffer, G. B. et al. | 2001
- 9
-
Advanced Silicide-Based Materials for High Temperature Glass Processing SensorsCastro, R. G. / Peters, M. I. / Mendoza, D. E. / Vaidya, R. U. / Petrovic, J. J. et al. | 2001
- 9
-
Preparation and Characterization of Powders of Metallic and Intermetallic NanoparticlesPithawalla, Y. B. / Deevi, S. / Deevi, S. C. / El-Shall, M. S. et al. | 2001
- 9
-
Powder Forging of an Aluminum AlloySchaffer, G. B. / Dashwood, R. J. et al. | 2001
- 9
-
The New Technology of Production of Hot-Compacted Briquettes and Extrusion of Technological Billets for Subsequent DeformationLitvintsev, A. I. et al. | 2001
- 9
-
Conventional Hot Pressing Characteristics of Al-SiC and Al-TiC Composites Prepared from Aluminum and Copper Elemental PowdersBedir, F. / Gungor, O. / Ogel, B. et al. | 2001
- 9
-
Improvement of Thermoelectric Properties of Bismuth Telluride Alloys by Controlling the Microstructure through Mechanical Alloying and ExtrusionBelanger, F. / Simard, J.-M. / Vasilevskiy, D. / Turenne, S. / L Esperance, G. et al. | 2001
-
Influence of Production Processes on the Reactivity Layer Formation in Ti-Al Intermetallics Discontinuously Reinforced Al-Si-Mg AlloysMartinez, N. / Salvador, M. D. / Amigo, V. / Edil, C. et al. | 2001
- 10
-
Dimensional Changes During Sintering of Astaloy CrM Hoganas Powder with Carbon and Manganese AdditionsPieczonka, T. M. / Mitchell, S. C. / Stoytchev, M. / Kazior, J. et al. | 2001
- 10
-
The Influence of the Core Carbon Content on the Rolling Contact Fatigue of Distaloy HP-1Petersen, J. / Beiss, P. et al. | 2001
- 10
-
Effect of Microstructural Inhomogeneities on the Mechanical Properties of Hybrid P/M SteelsSaritas, S. / Causton, R. / James, W. B. / Lawley, A. et al. | 2001
- 10
-
Influence of Density on P/M Steel Fatigue Crack Initiation and PropagationBergmark, A. et al. | 2001
- 10
-
Processing Effects On Rolling Contact Fatigue Properties of Sintered and DensiFormed™ Ferrous AlloysNigarura, S. / Blanchard, P. / Trasorras, J. et al. | 2001
- 10
-
Functional Material Design for High-Density P/M Connecting RodsSkoglund, P. / Bengtsson, S. et al. | 2001
- 10
-
Transition from Trans-Particle to Inter-Particle Fracture Under Cyclic Loading of Distaloy AE + 0.5%CDrar, H. et al. | 2001
- 10
-
Rolling Contact Fatigue Tests of Selectively Densified MaterialsBengtsson, S. / Forden, L. et al. | 2001
- 10
-
Effect of Porosity on the Hardenability of P/M SteelsSaritas, S. / Doherty, R. D. / Lawley, A. et al. | 2001
- 10
-
Hidden Horrors Defeat Dynamic Performance Properties - Impact, Fatigue and ForceNath, R. H. / Saxton, J. / Schwarz, J. et al. | 2001
- 10
-
P/M Fe/Cr-TiC Composites: Processing, Microstructure and Abrasive Wear BehaviorDooan, O. N. / Alman, D. E. / Hawk, J. A. et al. | 2001
- 10
-
Dimensional changes during sintering of Astaloy CrM Höganäs powder with carbon and manganese additionsPieczonka, T. / Mitchell, S.C. / Stoytchev, M. / Kazior, J. et al. | 2001
- 10
-
The Influence of Microstructure and Carbide Particles on the Creep Behaviors of P/M AlloysSegall, A. E. / Cimino, T. / Murphy, T. / Haberberger, T. / Shaw, B. et al. | 2001
- 10
-
Fatigue Crack Initiation and Propagation in Ferrous Powder Metallurgy AlloysPolasik, S. / Williams, J. J. / Chawla, N. / Narasimhan, K. S. et al. | 2001
- 10
-
Admixing Fe-Cu-Ni Master Alloys to Steel Powders to Improve Sinter Hardenability and the Mechanical Properties of Sinter Hardened PartsJulien, B. / L Esperance, G. et al. | 2001
- 10
-
Processing Strength Ductility and Toughness of Sintered Mn-(Mo)-C SteelsCias, A. W. / Stoytchev, M. / Wronski, A. et al. | 2001
- 11
-
Investigation of the Sintering Process Using Non-Contact Electromagnetic Acoustic TransducersFoley, J. C. / Rehbein, D. K. / Barnard, D. et al. | 2001
- 11
-
Electric Conductivity Measurements in Green-State Powder Metallurgy CompactsLudwig, R. / Leuenberger, G. / Apelian, D. et al. | 2001
- 11
-
Sediment Testing of P/M ComponentsFrasier, R. et al. | 2001
- 12
-
U.S. P/M Industry - Is Economic Competitiveness Affected by Environmental CostsIsaacs, J. A. / Diaz-Triana, A. et al. | 2001
- 12
-
Economic Assessment of HIPed Powder Processing and Conventional ProcessesMaziarz, J. L. / Isaacs, J. A. et al. | 2001
- 12
-
Environmental Trends for the U.S. Powder Metallurgy IndustryDiaz-Triana, A. / Isaacs, J. A. et al. | 2001
- 12
-
Knowledge Management of P/M Parts Design with Group TechnologyKim, M. et al. | 2001
- 12
-
Powder Metallurgy Opportunities in the NIST Advanced Technology Program and the NIST Materials and Standards LaboratoriesAllocca, C. M. / Fields, R. / Dapkunas, S. et al. | 2001
-
Influence of Notches on Fatigue Strength of High Performance PM-MaterialsEngstrom, U. / Lipp, K. / Sonsino, C. M. et al. | 2001
-
Status of Sintering Atmospheres for Mass Production of P/M Components - Technologies, Quality, CostAlms, U. / Arnhold, V. / Bockel-Macal, S. / Bruchet, P. / Speaker, R. F. et al. | 2001
-
Best Practices in Powder Injection MoldingGerman, R. M. et al. | 2001
-
Defect Definition - Structural not VisualNath, R. H. / Saxton, J. / Schwarz, J. et al. | 2001
-
The Powder Metals Industry: - Evolution or RevolutionPetrick, I. et al. | 2001
-
Influence of Composition on Thermo-Mechanical Properties of TiNi Shape Memory Alloy Fabricated by Spark-Plasma SinteringKyogoku, H. / Tanbo, T. / Yokota, M. / Komatsu, S. / Yoshida, F. / Sakuma, T. / Iwata, U. et al. | 2001
-
Quantitative Assessment of Pores to Reduce Variation in Component CharacteristicsWanibe, Y. / Itoh, T. / Yokoyama, S. / Kusaka, K. et al. | 2001
-
Conventional Powder Metal is Still a Technology LeaderWielbaker, T. R. / Lumpkins, E. et al. | 2001
-
Influence of Aspiration Base Pressure on Melt Atomization ResearchTing, J. / Eisen, W. B. / Peretti, M. W. et al. | 2001