Bitte wählen Sie ihr Lieferland und ihre Kundengruppe
A design method of piping components for Level 2 earthquake (the possible strongest earthquake with extremely low probability of occurrence) such as bolted flanged joints, expansion joints, and equipment nozzles is described. This design method is provided taking into account their failure modes and degree of safety. The failure modes for each piping component is classified according to the past damage experience due to earthquake, and each criterion is provided against the failure mode. The typical failure modes are gas leakage, fatigue failure, cumulative plastic deformation during and after earthquake for bolted flanged joints, expansion joints and equipment nozzles in piping components, respectively. Specifically, the simplified method of bolted flanged joints is proposed as the convenient design method for chemical plants and petroleum refineries, etc.(here in after calls as plant) The method is derived using gasket factor, gasket dimensions and clamping forces due to bolts for external piping load. This practical method is investigated and verified due to the experimental results on the welding neck type flanges subjected to static bending moment, in which the bolted flanged joints of NPS 4Prime; and 8'' in size, 3 types of gaskets are used. In addition, the dynamic inertia force effect is also studied by the shaking table tests using cantilever model of bolted flanged joints at fixed side with changing the bolt clamping forces and gasket types.