Proceedings - Materials Week 2002 : [incl. 6th International Conference on Joining Ceramics, Glass and Metal] ; [papers, keynotes and plenaries] — [Elektronische Ressource] (Englisch)
- Neue Suche nach: Materials Week
- Weitere Informationen zu Materials Week:
- http://d-nb.info/gnd/1404214-9
- Neue Suche nach: International Conference on Joining Ceramics, Glass and Metal
- Weitere Informationen zu International Conference on Joining Ceramics, Glass and Metal:
- http://d-nb.info/gnd/1902798-9
- Neue Suche nach: Werkstoffwoche-Partnerschaft
- Weitere Informationen zu Werkstoffwoche-Partnerschaft:
- http://d-nb.info/gnd/5328467-7
- Neue Suche nach: Materials Week
- Weitere Informationen zu Materials Week:
- http://d-nb.info/gnd/1404214-9
- Neue Suche nach: International Conference on Joining Ceramics, Glass and Metal
- Weitere Informationen zu International Conference on Joining Ceramics, Glass and Metal:
- http://d-nb.info/gnd/1902798-9
- Neue Suche nach: Werkstoffwoche-Partnerschaft
- Weitere Informationen zu Werkstoffwoche-Partnerschaft:
- http://d-nb.info/gnd/5328467-7
2002
-
ISBN:
- Konferenzband / Datenträger
-
Titel:Proceedings - Materials Week 2002 : [incl. 6th International Conference on Joining Ceramics, Glass and Metal] ; [papers, keynotes and plenaries]
-
Beteiligte:
-
Kongress:Materials Week ; 2002 ; 2002 ; Munich
European Congress on Advanced Materials, their Processes and Applications ; 2002 ; Munich
International Conference on Joining Ceramics, Glass and Metal ; 6 ; 2002 ; Munich -
Ausgabe:[Elektronische Ressource]
-
Verlag:
- Neue Suche nach: Werkstoff-Informationsges.
-
Erscheinungsort:[s.l.]
-
Erscheinungsdatum:2002
-
Format / Umfang:1 CD-ROM
-
Anmerkungen:12 cm
-
ISBN:
-
Medientyp:Konferenzband
-
Format:Datenträger
-
Sprache:Englisch
- Neue Suche nach: ALL 710
- Neue Suche nach: 51.70 / 51.60 / 51.52
- Weitere Informationen zu Basisklassifikation
-
Schlagwörter:
-
Klassifikation:
-
Datenquelle:
Inhaltsverzeichnis Konferenzband
Die Inhaltsverzeichnisse werden automatisch erzeugt und basieren auf den im Index des TIB-Portals verfügbaren Einzelnachweisen der enthaltenen Beiträge. Die Anzeige der Inhaltsverzeichnisse kann daher unvollständig oder lückenhaft sein.
- 0
-
P/M aluminium structural parts for automotive application - materials and processing developmentSchubert, T. / Balzer, H. / Neubing, H.C. / Gans, H. et al. | 2002
- 0
-
Influence of alloys and extrusion parameters on the mechanical properties of magnesium profilesLass, J.F. / Bach, F.W. et al. | 2002
- 0
-
Advances in the simulation of spring-back in metal sheet formingBenevolenski, O.I. / Krasowsky, A.A. / Riedel, H. / Schmitt, W. et al. | 2002
- 0
-
Ceramics and steel - two different materials - one grinding process?Tönshoff, H.K. / Denkena, B. / Friemuth, T. / Glatzel, T. / Stahl, M. et al. | 2002
- 0
-
Mechanical properties of AZ31 Mg alloy processed by single roller drive rollingMabuchi, M. / Chino, Y. / Hosokawa, H. / Shimojima, K. / Wen, C.E. / Yamada, Y. / Iwasaki, H. et al. | 2002
- 0
-
Influence of component material properties on tribological behaviour of composite materialsPosmyk, A. / Myalski, J. / Sleziona, J. / Grabowski, M. et al. | 2002
- 0
-
Numerical modeling of the sheet metal forming process for blanks with an initial strength gradientHogg, M. / Roll, K. et al. | 2002
- 0
-
Machining of compoundsDenkena, B. / Friemuth, T. / Boehnke, D. et al. | 2002
- 0
-
Superplastic forming and diffusion bonding of cellular structuresSafiullin, R.V. / Kaibyshev, O.A. / Lutfullin, R.Y. / Kruglov, A.A. / Rudenko, O.A. et al. | 2002
- 0
-
Innovative fibre reinforced plastic rolls in ultra-light weight sandwich constructionEilers, P. / Funck, R. / Himmel, N. / Johannemann, G. / Kuhn, S. / Roth, M.A. / Schubert, M. / Steffens, M. / Stenz, P. et al. | 2002
- 1
-
Thermal cycling behavior of magnesium alloy WE43Valente, M. / Valente, T. / Ricci, R. et al. | 2002
- 1
-
Intermetallic compounds formed during diffusion soldering of Cu/Ti/Si onto Au/Cu/Al2O3 with in interlayersTsao, L.C. / Gust, W. / Mittemeijer, E.J. et al. | 2002
- 1
-
Deposition of TiN thin films on three dimensional shaped tools by pulsed laser depositionLackner, J.M. / Waldhuser, W. / Lenz, W. / Ebner, R. / Major, B. / Schöberl, T. et al. | 2002
- 1
-
Hardening of tempering steel by spray-quenchingWell, M. van / Bach, F.W. / Reimche, W. / Bernard, M. et al. | 2002
- 1
-
Low dimensional materials for thermoelectric energy conversion systemsNurnus, J. / Böttner, H. / Künzel, C. / Vetter, U. / Lambrecht, A. / Schumann, J. / Völklein, F. et al. | 2002
- 1
-
Superparamagnetic nanocomposite materialsZimmermann, G. / Pridoehl, M. / Roth, P. / Knipping, J. / Wassermann, E.F. / Rellinghaus, B. / Hülser, T. et al. | 2002
- 1
-
Analysis of temperature patterns in backed-up investment mouldsGrohn, M. / Rosefort, M. / Dahmen, C. / Fettweis, D. / Sahm, P.R. / Bührig-Polaczek, A. et al. | 2002
- 1
-
Influence of disinfection processes on the recyclability of polyolefinsBohlmann, B. / Hirth, T. / Langer, B. / Grellmann, W. et al. | 2002
- 1
-
Deposition and characterisation of amorphous carbon filmsSchulz, H. / Scheibe, H. / Retzko, J. / Froeck, C. et al. | 2002
- 1
-
The thermal decomposition of the C2HBaO4.5 and Sn(COO)2 oxalates and the formation of BaSnO3 from their mixtureBente, K. / Schmitz, W. / Kommichau, G. / Korzun, B.V. et al. | 2002
- 1
-
Electrical properties of the V-Sb-O systemGro, T. / Filipek, E. / Kuku, Z. / Krajewski, A. / Krajewski, K. / Duda, H. et al. | 2002
- 1
-
Powders and bulk materials based on nanostructured silicon nitrideZhilinska, N. / Zalite, I. / Grabis, J. / Korb, G. / Kladler, G. et al. | 2002
- 1
-
SiC to metal brazing for medium and high temperature applicationsMaier, H.R. / Ziombra, A. et al. | 2002
- 1
-
Ceramic SiCN fibers: processing, properties and applicationsMotz, G. / Hacker, J. / Ziegler, G. / Clauss, B. / Schawaller, D. et al. | 2002
- 1
-
Second order nonlinear optical effects in C59Ge and C58Ge2Plucinski, K.J. / Kityk, I.V. / Hessing, K. et al. | 2002
- 1
-
Effect of Si on microstructure and mechanical properties in Ti-Al-Fe-Si alloyHyun, Yong-Taek / Jeong, Hi-Won / Kim, Seung-Eon / Lee, Yong-Tai et al. | 2002
- 1
-
New non-destructive testing methods for CFRP aerospace componentsKück, A. / Henrich, R. et al. | 2002
- 1
-
Investigations of Ag-Zn-Mg-based electrical contact materials prepared by internal oxidationBezjak, J. et al. | 2002
- 1
-
Fatigue damage mechanisms in open-cell metal foamsOhrndorf, A. / Krupp, U. / Christ, H.J. et al. | 2002
- 1
-
Investigations of adhesives connecting single mode fibres to KTP strip wave guides concerning their resistance to climatic influenceKöhler, G. / Schroeter, T. / Stopsack, C. / Weiland, E. et al. | 2002
- 1
-
New types of surface conditioning for steel sheet by high-rate evaporation in combination with plasma processesRoegner, F.H. / Scheffel, B. / Metzner, C. et al. | 2002
- 1
-
Novel method of seeding for preparing mullite at relative low temperatureChen, Z. / Zhang, L. / Cheng, L. / Wang, D. et al. | 2002
- 1
-
Joints between ceramic materials with glass interlayersEsposito, L. / Mazzocchi, M. / Salvo, M. et al. | 2002
- 1
-
Application of glass solders in microtechniques and their application at laser solderingKöhler, G. / Kasch, S. / Pfeifer, J. / Neuhäuser, M. et al. | 2002
- 1
-
Processing, microstructure development and electrical properties of oxide layers anodically grown on sintered pellets of newly developed capacitor grade niobium and vanadium-doped nibium powdersStörmer, H. / Schnitter, C. / Michaels, A. / Gerthsen, D. et al. | 2002
- 1
-
Analysis of the defects of casts from a magnesium alloyKielbus, A. / Hernas, A. / Cizek, L. / Juricka, I. / Pawlica, L. et al. | 2002
- 1
-
Microstructure of quenched and aged Ni-rich Ni-Ti shape memory alloysSomsen, C. / Kästner, J. / Wassermann, E.F. et al. | 2002
- 1
-
Effects of grain size and morphology on mechanical properties of Mg alloysMabuchi, M. / Chino, Y. / Hosokawa, H. / Shimojima, K. / Wen, C.E. / Yamada, Y. / Kobata, M. / Iwasaki, H. et al. | 2002
- 1
-
Magnesium investment casting and mould - magnesium reactionsZhang, Z. / Turcotte, C. / Morin, G. et al. | 2002
- 1
-
Modelling the microstructure evolution in cold rolled strips during continuous annealingHein, V. / Freydank, H. / Michel, U. / Zieger, H. / Zouhar, G. / Foerster, P. / Rühl, H. et al. | 2002
- 1
-
Microstructure and properties of Nd-Fe-B magnetsVasilyeva, E. / Vystavkina, V. et al. | 2002
- 1
-
Damage characterisation of short fibre reinforced Al alloys correlated with high temperature mechanical behaviour under constant load and constant deformation rate conditionsSchuerhoff, J. / Yawny, A. / Kaustraeter, G. / Skrotzki, B. et al. | 2002
- 1
-
Application of the generalized fracture mechanical integral concept JG in microelectronic packaging technologyGhavifekr, H.B. / Michel, B. et al. | 2002
- 1
-
Radiation-cured polymeric nanocomposites of enhanced surface-mechanical propertiesGläsel, H.J. / Bauer, F. / Hartmann, E. / Mehnert, R. / Möbus, H. / Ptatschek, V. et al. | 2002
- 1
-
PVD-coatings on polymersKrumreich, J. et al. | 2002
- 1
-
Thermal stability and mechanical properties of SiC-fibre (SCS-6) reinforced Ti-6-2-4-2 and Ti-22Al-25Nb matrix compositesHemptenmacher, J. / Leyens, C. / Kumpfert, J. / Weber, K. et al. | 2002
- 1
-
Tribological carbon-based coatings for wear protectionLackner, J.M. / Stotter, C. / Waldhausen, W. / Ebner, R. / Lenz, W. / Beutl, M. et al. | 2002
- 1
-
Tailored diamond and cBN tools by vacuum brazingBoretius, M. et al. | 2002
- 1
-
Continuous fibre reinforced thermoplastics (CFRT) with high temperature polymer blend matricesBlinzler, M. / Wöginger, A. / Mitschang, P. et al. | 2002
- 1
-
Simplified two-phase-flow model for the simulation of convection effects during solidification with free surfacesEhlen, G. / Ludwig, A. / Sahm, P.R. / Bührig-Polaczek, A. et al. | 2002
- 1
-
Preparation of polypropylene-clay nanocompositesLeuteritz, A. / Pospiech, D. / Kretzschmar, B. / Jehnichen, D. / Jentzsch, U. / Grundke, K. / Janke, A. et al. | 2002
- 1
-
High performance epoxy layered silicate nanocomposites: an overviewBecker, O. / Varley, R.J. / Simon, G.P. et al. | 2002
- 1
-
Sb-based semiconductors for TPV application grown in an industrial size MOVPE reactorAgert, C. / Bett, A.W. / Dimroth, F. / Heuken, M. / Giesen, C. / Dauelsberg, M. / Hannappel, T. / Kollonitsch, Z. / Möller, K. / Seip, M. et al. | 2002
- 1
-
Kilometer long copper low-k interconnectsTokei, Z. / Brongersma, S.H. / Maex, K. et al. | 2002
- 1
-
Investigation of austenite transformations in high strength low alloy steelUzlov, O. / Bolshakov, V. / Klimenko, A. / Karnaukh, A. et al. | 2002
- 1
-
Superplastic behaviors of recycled Mg alloy by solid recycling processChino, Y. / Shimojima, K. / Hosokawa, H. / Yamada, Y. / Wen, C.E. / Iwasaki, H. / Mabuchi, M. et al. | 2002
- 1
-
Recent improvements in gamma titanium aluminides ingot metallurgyChatterjee, A. / Kettner, H. / Güther, V. et al. | 2002
- 1
-
Quantitative investigation of damage in a single crystal superalloyWintrich, K. / Thomas, S. / Müller, C. / Exner, E. et al. | 2002
- 1
-
How to double the fatigue strength of a metal matrix compositeHausmann, J.M. / Leyens, C. / Kaysser, W.A. et al. | 2002
- 1
-
Correlation of local mechanical properties and corresponding microstructure of an AM50 die cast instrument panel for an improved crash worthiness designSchendera, C. / Blauel, J.G. / Deinzer, G. et al. | 2002
- 1
-
Ceramic feedstocks for micro powder injection moldingRath, S. / Merz, L. / Ritzhaupt-Kleissl, Hans-Joachim / Ruprecht, R. / Haußelt, J. et al. | 2002
- 1
-
Synthesis and characterization of novel non-oxide sol-gel derived inorganic membranesVölger, K.W. / Iwamoto, Y. / Kroke, E. / Riedel, R. et al. | 2002
- 1
-
Mechanical properties of Al/MMC for application as disk material in low temperature sections of gas turbines in civil aircraftKorn, V. / Wagner, L. / Sinha, G. et al. | 2002
- 1
-
Machining of particle reinforced aluminium components for aircraft enginesWeinert, K. / Petzoldt, V. et al. | 2002
- 1
-
Laser joining of ceramics in liquid phaseExner, H. / Reinecke, A.M. / Regenfuß, P. / Nieher, M. et al. | 2002
- 1
-
Influence of dilution on microstructure and mechanical properties of a cobalt-based alloy deposited by plasma transferred arc weldingYaedu, A.E. / Silva, P.S.C.P. da / d'Oliveira, A.S.C.M. et al. | 2002
- 1
-
Aluminium plastic deformation process in butt cold weldingIordachescu, M. / Constantin, E. et al. | 2002
- 1
-
Precision forming of polymer-ceramic components for automotive and mechanical engineeringBaay, T. te / Tittel, R. / Sindelar, R. / Greil, P. / Schubert, R. et al. | 2002
- 1
-
Early stages of the oxide scale formation on FeCrAl alloys: transmission electron microscopy studiesDimyati, A. / Penkalla, H.J. / Untoro, P. / Klaar, H.J. / Mayer, J. / Naumenko, D. / Quadakkers, W.J. et al. | 2002
- 1
-
Stability of amorphous tantalum-silicon-nitrogen diffusion barrier layer for copper interconnect systemsWenger, C. / Wenzel, C. / Reinicke, M. / Bartha, J.W. / Hübner, R. / Hecker, M. / Mattern, N. / Wetzig, K. / Baumann, J. / Schulz, S. et al. | 2002
- 1
-
Cesic - a material for leight weighted optical applicationsKrödel, M. / Pailer, N. et al. | 2002
- 1
-
Soft magnetic Fe-based composite material for high frequency motor and actuator applicationsTenbrink, J. / Brand, R. et al. | 2002
- 1
-
Advanced lithium metal oxides and electrolytes for a 42V lithium ion vehicle supply batteryKümpers, J. et al. | 2002
- 1
-
The effect of cooling conditions on residual stress and microstructure of medium carbon and micro-alloyed steelsLacarac, V. / Smith, D.J. / McMahon, C. / Tierney, M.J. et al. | 2002
- 1
-
Microstructure changes induced by cold deformation of low-alloyed TRIP-steelsWasilkowska, A. / Tsipouridis, P. / Werner, E.A. / Pichler, A. / Traint, S. et al. | 2002
- 1
-
Micro-characterisation of precipitates in 9% Cr-steels using EELS and EFTEMLetofsky-Papst, I. / Warbichler, P. / Hofer, F. / Letofsky, E. / Cerjak, H. et al. | 2002
- 1
-
Influence of extrusion ratio on microstructure and mechanical properties of hot extruded AZ31Dzwonczyk, J. / Bohlen, J. / Hort, N. / Kainer, K.U. et al. | 2002
- 1
-
Investigation of the structure and properties of dispersion-strengthened mechanically alloyed composite materials on the base of aluminum alloysAksenov, A.A. / Solonin, A.N. / Kudashov, D.V. et al. | 2002
- 1
-
Integral modelling of aluminium processing part IV: texture and microstructure evolution during cold rolling and subsequent annealingMukhopadhyay, P. / Crumbach, M. / Goerdeler, M. / Aretz, H. / Schneider, M. / Loeck, M. / Gottstein, G. et al. | 2002
- 1
-
Microstructure formation in solidification of Al-Si-alloys under magnetically controlled convective conditionsWeiß, A. / Zimmermann, G. / Salber, R. et al. | 2002
- 1
-
Rheological model for failure prediction of metal matrix compositesHausmann, J.M. / Leyens, C. / Kaysser, W.A. et al. | 2002
- 1
-
Thermoelectric Si(1-x)Ge(x) and PbTe thin films for device applicationsKünzel, C. / Beyer, H. / Braun, M. / Feißt, A. / Lamprecht, A. / Nurnus, J. / Plescher, G. / Vetter, U. et al. | 2002
- 1
-
Electrodeposition of composite coatings of metals Sn, Co-W/ disperse phase hydroxylapatite Ca5(PO4)3(OH)+Ca3(PO4)2Knipele, A. / Rubene, V. / Belmane, V. / Pultraks, P. / Lubne, M. / Jansone, I. et al. | 2002
- 1
-
Modeling the phase separation during solidification of hypermonotectic alloys with a two phase approachWu, M. / Ludwig, A. / Ratke, L. et al. | 2002
- 1
-
A sol-gel method for growing aluminium garnet coatings at relatively low-temperatureWang, H.M. / Rodenburg, J.M. et al. | 2002
- 1
-
Summary of deposition coating on magnesium alloys with high purity magnesiumYamamoto, A. / Sughara, K. / Yamasaki, G. / Fukumoto, S. / Tsubakino, H. et al. | 2002
- 1
-
Microstructure investigation and thermodynamic modelling of a particle reinforced active brazing alloyKlotz, U.E. / Zigerlig, B. / Elsener, H.R. / Rusch, J.J. et al. | 2002
- 1
-
Characterisation of interfaces between Sn-V alloys and aluminaDerby, B. / Winn, A. / Webster, J. / Holt, S. et al. | 2002
- 1
-
Microstructure development of co-sputter deposited NiAl on continuous single crystal Al2O3 fibersWen, K.Y. / Reichert, K. / Hu, W. / Gottstein, G. et al. | 2002
- 1
-
Investigations on Cu-particle coarsening in Cu/ZnO methanol catalysts under reaction conditionsCarroll, M.C. / Skrotzki, B. / Kurtz, M. / Muhler, G. / Eggeler, G. et al. | 2002
- 1
-
Relationship between interface reactions and seal strengths of CRT solder glass jointsSteigelmann, O. / Hal, H. van / Graaf, T. van der et al. | 2002
- 1
-
Ceramic transient liquid phase bonding of aluminaChang, Li-Shing / Huang, Jiang-Fong / Lo, Pei-Ling et al. | 2002
- 1
-
Quantitative phase analysis of ceramic PBSCCO high-temperature superconductor precursors for the oxide powder in tube technologyRäth, S. / Schmahl, W.W. / Deroche, C. / Woodall, L. / Lehmann, M. / Bartels, M. / Gerards, M. et al. | 2002
- 1
-
Ceramic rolls for wires, tubes and sheetsKailer, A. / Hollstein, T. / Wötting, G. / Berroth, K. / Kozlowski, J. / Albrecht, M. et al. | 2002
- 1
-
Internal friction of cast magnesium alloy AZ91 and AZ31 magnesium sheetGöken, J. / Bohlen, J. / Letzig, D. / Kainer, K.U. et al. | 2002
- 1
-
Influence of prior deformation on microstructure, mechanical properties and rollability of magnesium alloysZhang, J. / Wagner, L. et al. | 2002
- 1
-
Fatigue behaviour of a titanium matrix compositeBettge, D. / Günther, B. / Wedell, W. / Portella, P.D. / Hemptenmacher, J. / Schurmann, H. et al. | 2002
- 1
-
Characterization of slip cast and powder injection moulded microcomponents made of zirconiaKasanicka, B. / Schulze, V. / Löhe, D. et al. | 2002
- 1
-
Microstructure of the Al2O3-Fe composite obtained by ceramic casting slipOzi, A. / Konopka, K. / Wejrzanowski, T. / Szafran, M. / Kurzydowski, K.J. et al. | 2002
- 1
-
A critical evaluation of the applicability of TMF life prediction methods to austenitic steelBauer, V. / Christ, H.J. et al. | 2002
- 1
-
Fatigue life prediction in dynamic material testing using positron annihilationBennewitz, K. / Haaks, M. / Staab, T. / Eisenberg, S. / Lampe, T. / Maier, K. et al. | 2002
- 1
-
Mechanical and tribological properties of an epoxy resin containing titanium dioxide nanoparticlesWetzel, B. / Haupert, F. / Friedrich, K. / Zhang, M.Q. / Rong, M.Z. et al. | 2002
- 1
-
Differentiation of SCC processes based on electrochemical noise measurementsLeban, M. / Legat, A. et al. | 2002
- 1
-
Residual stresses in glass/metal-joints after ultrasonic torsion weldingKuckert, H. / Born, C. / Wagner, G. / Eifler, D. et al. | 2002
- 1
-
Joining zirconia to inconel 600/UMCo-50 superalloys using an Sn 10Ag4Ti active filler metalChuang, T.H. et al. | 2002
- 1
-
Development of a sealing material for ceramics for applications at elevated temperaturesMenzler, N.H. et al. | 2002
- 1
-
High temperature induction melting of low conductive materialsBehrens, T. / Nacke, B. / Baake, E. et al. | 2002
- 1
-
Synchroton X-ray study of cold-worked shape-memory NiTi-wires and NiTi-hooksSchuster, A. / Balch, D.K.j. / Eggeler, G. / Dunand, D.C. et al. | 2002
- 1
-
Investigation of some Mg-Al-Sb-Si(-Mn) die cast alloys containing 2wt% AlBakke, P. / Pettersen, K. et al. | 2002
- 1
-
Development of cube-textured Ni and Ni alloy substrate tapes for coated conductorsNast, R. / Obst, B. / Schlachter, S.I. / Goldacker, W. et al. | 2002
- 1
-
There is a connection among the characteristics of the low cycle fatigue, high cycle fatigue and fatigue crack growthNagy, G. / Lukacs, J. et al. | 2002
- 1
-
Formation of Mg-Ni-Gd metallic glasses and their deformationMatsuzaki, K. / Hatsukano, K. / Shimizu, T. / Hanada, K. et al. | 2002
- 1
-
Processing of open-cell steel foams by the SRFS-process: state of the art and development potentialitiesMohr, U. / Shebata, M. / Bleck, W. / Scholz, P.F. et al. | 2002
- 1
-
Manufacturing and optimisation of properties for new composite calender roller covering materials. Part 1: manufacturing and optimisation of thermoplastic calender roller coveringsPrehn, R. / Xian, G.J. / Haupert, F. / Friedrich, K. / Beallaire, T. / Lutz, A. / Yi, X.S. et al. | 2002
- 1
-
Electrical and mechanical properties of porous silicon dioxide as an ultra low k dielectricFrühauf, S. / Streiter, I. / Puschmann, R. / Schulz, S.E. / Gessner, T. / Chudoba, T. / Richter, F. / Flannery, C.M. et al. | 2002
- 1
-
Investigation of thick films for tunable microwave devicesVoigts, M. / Zimmermann, F. / Xu, J. / Mensklou, W. / Ivers-Tiffee, E. et al. | 2002
- 1
-
Functional polymers for printing of plastic electronicsClemens, W. / Rost, H. / Bernds, A. / McCulloch, I. / Giles, M. et al. | 2002
- 1
-
Some aspects about the kinetics and thermodynamic transformation of a bainitic S.G. Cast IronMilosan, I. / Sarbu, F. / Dobrota, R. / Popisteanu, C. et al. | 2002
- 1
-
Topography and microstructure of cavities obtained by micro-milling of tool steelHorsch, C. / Schulze, V. / Löhe, D. et al. | 2002
- 1
-
Determination of temperature dependent elastic constants of anisotropic materials by the resonance methodFedelich, B. / Beckmann, J. / Finn, M. / Zelewski, M. / Olschewski, J. et al. | 2002
- 1
-
Pulsed photothermal radiometry - a method to quality the laser beam weldability of thermoplasticsHaferkamp, H. / Busse, A. von / Hurstedt, M. / Fargas, M. / Bunte, J. et al. | 2002
- 1
-
Corrosion protection of magnesium die castings for exterior automotive applicationsSkar, J.I. / Wang, G. / Berkmortel, R. et al. | 2002
- 1
-
Development of high temperature-stable, functional inorganic-organic polymers for radio frequency applicationsFröhlich, L. / Graf, J. / Stolle, T. / Munk, M. / Houbertz, R. / Sommer, G. / Salhi, F. / Zychlinski, H. von / Gaier, S. / Mueller-Fiedler, R. et al. | 2002
- 1
-
A new material for digital recording of X-ray images in medical diagnosticsHackenschmied, P. / Schmitt, B. et al. | 2002
- 1
-
Changes of material properties due to cyclic nonproportional loading of pearlitic and bainitic rail steelsTapp, C. / Werner, E. et al. | 2002
- 1
-
A new, versatile simulation tool for thermochemical reactionsÖchsner, A. / Gegner, J. et al. | 2002
- 1
-
Advanced and tailored LFT - long glass reinforced thermoplastic parts with engineering thermoplastics and local reinforcement by fabrics and continuous fibersGeiger, O. / Eyerer, P. / Henning, F. / Krause, W. / Droste, A. / Brüssel, R. / Locher, F. et al. | 2002
- 1
-
Pumice effects on properties of granite tile productsTöre, I. et al. | 2002
- 1
-
Short fatigue cracks - mechanisms and microstructural effects in Ti-6.8Mo-4.5Fe-1.5AlFloer, W. / Christ, H.J. / Fritzen, C.P. / Krupp, U. / Schick, A. et al. | 2002
- 1
-
Synthesis of B-C-N coatings by thermal plasmajet CVDWank, A. et al. | 2002
- 1
-
Laser induced surface modification of low temperatured cofired ceramics (LTCC)Duitsch, U. / Heidinger, R. / Rohde, M. / Gahr, K.H. Zum et al. | 2002
- 1
-
Hardness enhancement, thermal stability and dry sliding wear resistance of nanometer scale multilayered TiN/CrN coatingsYang, Q. / Zhao, L.R. et al. | 2002
- 1
-
Design of anisotropic textile reinforced composites with adapted vibro-acoustic and thermomechanical property profileHufenbach, W. / Täger, O. / Langkamp, A. / Helms, O. et al. | 2002
- 1
-
Focused ion beam fabrication of amorphous Fe78B13Si9 alloyHosokawa, H. / Shimojima, K. / Chino, Y. / Yamada, Y. / Wen, C.E. / Mabuchi, M. et al. | 2002
- 1
-
Evaluation of microwave-assisted processing of compacted metal/ceramic powder mixturesLeparoux, S. / Vaucher, S. / Beffort, O. et al. | 2002
- 1
-
NanoDAC - a powerful method for nanomechanical analysis of polymeric materialsKeller, J. / Vogel, D. / Bauer, M. / Michel, B. et al. | 2002
- 1
-
Inline-NMR for polymer processingGottwald, A. / Wagenknecht, U. / Scheier, U. et al. | 2002
- 1
-
Prediction of grain distribution and macrosegregation: an example on Al-4.0%Cu plate castingWu, M. / Ludwig, A. / Sahm, P.R. / Bührig-Polaczek, A. et al. | 2002
- 1
-
Joining of Si3N4/TiN ceramics with steel components using particle reinforced active brazing filler metalsJanczak-Rusch, J. / Zigerlig, B. / Klotz, U.E. / Elsener, H.R. / Brem, F. / Kübler, J. / Blugan, G. et al. | 2002
- 1
-
Direct laser sintering of ceramicsKlocke, F. / Ader, C. et al. | 2002
- 1
-
Role of alloying elements in structure and atmospheric corrosion of galvanized metallic materials-results of laboratory exposuresVourlias, G. / Pistofidis, N. / Stergioudis, G. / Tsipas, D. et al. | 2002
- 1
-
W-Cu alloys produced by Cu infiltration in a self formed gradient tungsten preformIlic Jankovic, D. / Fiscina, J. / Mücklich, F. et al. | 2002
- 1
-
Differences between FEA on plastic deformation processIordachescu, M. / Georgescu, V. et al. | 2002
- 1
-
The surface tension of titanium and nickel alloysSchneider, S. / Egry, I. et al. | 2002
- 1
-
Performance of surface densified molybdenum alloyed PM transmission gearsForden, L. / Bengtsson, S. / Johansson, P. et al. | 2002
- 1
-
Porous polymeric particles for elimination of antibodies from human plasma. First resultsAlbrecht, W. / Groth, T. / Lützow, K. / Santoso, F. / Brauns, O. / Egner, R. / Rönspeck, W. / Winkler, D. et al. | 2002
- 1
-
Structure and properties of aluminium matrix composite containing carbon particles with amorphous structureMyalski, J. / Sleziona, J. / Posmyk, A. / Dyzia, M. et al. | 2002
- 1
-
Size effects and mechanical properties: results for thin copper foilsSimons, G. / Weippert, C. / Dual, J. / Villain, J. et al. | 2002
- 1
-
Laser beam sintering of thin alumina coatings on steelExner, H. / Reinecke, A.M. / Nieher, M. et al. | 2002
- 1
-
Machining technology of fibre reinforced magnesiumWeinert, K. / Lange, M. et al. | 2002
- 1
-
Manufacturing and optimisation of properties for new composite calender roller covering materials. Part 2: optimisation of the exiting thermoset systems by variation of the materials combinationBellaire, T. / Lutz, A. / Prehn, R. / Xian, G. / Haupert, F. / Friedrich, K. / Yi, X.S. et al. | 2002
- 1
-
High purity SiSiC components for MOVPE susceptorSaldsieder, D. / Lynen, A. / Torkler, C. / Schoen, O. / Alam, A. / Schineller, B. / Heuken, M. / Käppeler, J. / Jürgensen, H. et al. | 2002
- 1
-
Nanostructure materials for selection and amplification of lightAlbrecht, H. / Heise, G. / Schneider, H. / Houbertz, R. / Fröhlich, L. / Popall, M. / Kuhn, C. / Lipski, R. / Spanhel, L. / Martini, I. et al. | 2002
- 1
-
Ceramic microparts by multi-component powder injection moldingÖrlygsson, G. / Piotter, V. / Finnah, G. / Ruprecht, R. / Haußelt, J. et al. | 2002
- 1
-
Microstructural design of a CAD/CAM machinable infiltration ceramic with high strength and near net shape performanceRaether, F. / Durschang, B. / Thiel, N. et al. | 2002
- 1
-
Adhesion of hybrid sol-gel clear coatings to brassDumont, B. / Thiery, R. / Welter, J.M. / Duterne, J.P. et al. | 2002
- 1
-
The behaviour of alumina ceramics under tribological loadingErbacher, T. / Beck, T. / Vörhinger, O. et al. | 2002
- 1
-
STARCAST, a new casting alloy for automotive applicationsSpanjers, M. / Nicola, M. / Vernier, F. / Schape, W. / Schneider, W. / Storsberg, D.L. et al. | 2002
- 1
-
Fracture mechanics analysis of rim zone tensile residual stress statesÖchsner, A. / Heyder, M. / Gegner, J. et al. | 2002
- 1
-
High dimensional consistency of a PM steel alloyed with chromiumBerg, S. / Maroli, B. et al. | 2002
- 1
-
Characterization of the microstructural evolution during creep of a near-gamma TiAl alloySkrotzki, B. / Rudolf, T. et al. | 2002
- 1
-
Simulation of panel based closed cell foamShimojima, K. / Yamada, Y. / Mabuchi, M. / Chino, Y. / Hosokawa, H. / Wen, C.E. / Asahina, T. et al. | 2002
- 1
-
Examples of brazing of open an closed cell aluminium foamsMatthes, K.J. / Lang, H. / Aggiag, R. et al. | 2002
- 1
-
3D Monte-Carlo simulation of grain growth in polycrystalline solids: limits of the Potts approach and development of a spatial-scaling procedureShevchenko, S.V. / Ivasishin, O.M. / Vasiliev, N.L. / Semiatin, S.L. et al. | 2002
- 1
-
Magnetorheological fluids for adaptive vibration dampingBöse, H. / Trendler, A. et al. | 2002
- 1
-
Modelling the dislocation hardening in microalloyed steels under warm working conditionsStefanska-Kadziela, M. / Majta, J. et al. | 2002
- 1
-
Plasma transferred arc hardfacing with a Ni-based alloyGraf, K. / Kuwabara, E.Y. / d'Oliveira, A.S.C.M. et al. | 2002
- 1
-
Compatibilization of high performance polymer blends using block copolymersHoffmann, T. / Pospiech, D. / Häußler, L. / Komber, H. / Pötschke, P. / Voigt, D. / Werner, P. / Altstädt, V. et al. | 2002
- 1
-
Joining of aluminum foam sandwich to sheet metals by ultrasonic weldingBorn, C. / Kuckert, H. / Wagner, G. / Eifler, D. et al. | 2002
- 1
-
Adhesive bonding of carbon fibre-reinforced polymers and aluminiumStange, J. / Münstedt, H. / Späth, I. et al. | 2002
- 1
-
Computational modelling of temperature during spray-quenchingPhilipp, K. / Bach, F.W. et al. | 2002
- 1
-
A new ceramic body concept for high strength HV insulatorsFassbinder, G. et al. | 2002
- 1
-
Design, manufacturing and characterisation of graded Si(x)C(y) coatings on C/C-SiCMaile, K. / Berreth, K. / Lyutovich, A. / Zies, G. / Weiss, R. / Perova, T. et al. | 2002
- 1
-
Manufacture and properties of long fibre reinforced ceramics containing Ti and Al fillersStaintschev, G. / Frieß, M. / Krenkel, W. / Kochendörfer, R. et al. | 2002
- 1
-
Study of thermally stable intermetallic phase microjoints: temperature dependence of formation and morphologyLugscheider, E. / Wildpanner, B. et al. | 2002
- 1
-
Materials and processes for the interconnect technology of modular optical-electrical printed circuits (MOES)Kowatsch, M. / Schulz, R. / Scheel, W. / Gerdom, K. / Pfeiffer, K. / Kühn, H. / Modes, C. / Kostelnik, J. et al. | 2002
- 1
-
Manufacture of 'silicon carbide diatomite'Martin, H.P. / Heymer, H. / Adler, J. et al. | 2002
- 1
-
Magnetic gas-atomized alloys Nd-Fe-BVystavkina, V. / Vasilyeva, E. et al. | 2002
- 1
-
Tensile tests on glass ceramics to steel jointsSchwickert, T. / Geasee, P. / Reisgen, U. / Conradt, R. et al. | 2002
- 1
-
Electrochemical corrosion behaviour of metal ceramic jointsWielage, B. / Klose, H. / Hofmann, U. et al. | 2002
- 1
-
Mechanical testing of ultra-high temperature alloys by ohmic heating and video extensometryVölkl, R. / Fischer, B. et al. | 2002
- 1
-
Influence of long term exposure in air on the microstructure and mechanical properties of UDIMET 720LIHelm, D. / Roder, O. et al. | 2002
- 1
-
Microstructral and micromechanical characterisation of nickel-base superalloys by CBED and nanoindentation investigationsDurst, K. / Pyczak, F. / Biermann, H. / Göken, M. / Mughrabi, H. / Vehoff, H. et al. | 2002
- 1
-
High porosity titaniumLi, J.P. / Li, S.H. / Groot, K. de et al. | 2002
- 1
-
Melting upon particle impact during the cold spray processVlcek, J. / Huber, H. / Voggenreiter, H.F. / Lugscheider, E. et al. | 2002
- 1
-
Advanced composite tendon systemWinistoerfer, A. / Meier, U. et al. | 2002
- 1
-
Alloying effects on room temperature ductility and surface notch sensitivity of chromiumMatsumoto, Y. / Fujigami, F. / Tanaka, M. / Morinaga, M. et al. | 2002
- 1
-
Recrystallization of lead based piezoelectric materialLange, U. / Herborn, R. / Rothenburger-Glaubitt, M. / Glaubitt, W. / Lubitz, K. / Sporn, D. et al. | 2002
- 1
-
Diamond and other hard materials in combination with the LSI-processHuang, x. / Frieß, M. / Krenkel, W. / Kochendörfer, R. et al. | 2002
- 1
-
Comparing experimental methods to determine local oxygen concentrations inside Ti6Al4VReissig, L. / Czubayko, U. / Wanderka, N. / Völkl, R. / Glatzel, U. et al. | 2002
- 1
-
Boride reinforced surfaces of TiAl6V4-alloyKolbe, G. / Matthes, K.J. / Wielage, B. / Wank, A. / Podlesak, H. et al. | 2002
- 1
-
Large single crystal gas turbine blades for advanced heavy duty gas turbinesMüller, S. / Schadt, R. / Rösler, J. / Genovese, D. del / Wagner, I. / Sahm, P.R. et al. | 2002
- 1
-
Determination of fatigue crack propagation limit curves for non-metallic materialsLukacs, J. et al. | 2002
- 1
-
Dense biomorphic SiC ceramics derived from wood-based compositesGahr, M. / Schmidt, J. / Krenkel, W. et al. | 2002
- 1
-
Analysis of carbon materials by X-ray photoelectron spectroscopy (XPS)Retzko, J. / Treu, D. / Unger, W.E.S. / Schulz, H. / Scheibe, H.J. / Matsubayashi, N. et al. | 2002
- 1
-
Brazing of metal forming toolsBach, F.W. / Kutlu, I. et al. | 2002
- 1
-
Brazing metals to ceramics mechanically metallized with titaniumMaribondo do Nascimento, R. / Almeida Buschinelli, A.J. de / Martinelli, A.E. / Sigismund, E. / Remmel, J. / Reisgen, U. / Lugscheider, E. et al. | 2002
- 1
-
Anisotropic microstructure textures characterized by image analysis methodsBernthaler, T. / Nagel, A. / Smolej, V. / Schneider, G. et al. | 2002
- 1
-
Flow imaging of hot PVC melt in a high temperature rheo-NMR systemGottwald, A. / Kuran, P. / Körber, H. / Scheler, U. et al. | 2002
- 1
-
Combinatorial methods for the development of microwave dielectricsWessler, B. / Jehanno, V. / Rossner, W. / Maier, W.F. / Hill, J.R. / Tucker, J. / Löwenhauser, G. / Grabaw, J.U. et al. | 2002
- 1
-
Mechanical properties of carbon steel with fine structure prepared by mechanical alloying and subsequent hot pressingRochman, N.T. / Nishida, T. / Sueyoshi, H. et al. | 2002
- 1
-
Modelling of strength, ductility and impact behaviour of ODS ferritic-martensitic 7-13Cr steelsPreininger, D. et al. | 2002