Erscheinungsjahr
Medientyp
Datenquelle
Format
Lizenz
Sprache
-
Wind Tunnel Testing Methodology for Autonomous Vehicle Optical Sensors in Adverse Weather Conditions
Springer Verlag | 2023|(AVs), which are envisioned to benefit society in terms of safety, convenience, and precision. AVs rely heavily on optical sensors such as ...Schlagwörter: Engineering, Mechanical Engineering -
Which Pattern for a Low Pattern-Induced Bias?
Springer Verlag | 2022|-induced bias (PIB) observed in displacement fields obtained by local DIC. A model is presented for this purpose. It gathers the different errors ...Verlag: Springer International Publishing, ChamSchlagwörter: Engineering, Mechanical Engineering, Industrial and Production Engineering, Engineering Thermodynamics, Heat and Mass Transfer -
Wear Behavior of Tantalum Coated 316L Stainless Steel by DC Magnetron Sputtering for Orthopedic Applications
Springer Verlag | 2024|6.083 μm) by DC Magnetron Sputtering under the simulated body fluid (SBF) condition was optimized for the orthopedic applications. Stainless ...Schlagwörter: Engineering, Industrial and Production Engineering -
WaveImage – Order ODS for Rotating Machineries
Springer Verlag | 2021|influenced by its own operating forces and can be applied to the time and frequency domain. For rotating machinery with rapidly changing numbers of ...Verlag: Springer International Publishing, ChamSchlagwörter: Optical flow, Engineering -
WaveAR: A Real-Time Sensor-Based Augmented Reality Implementation for Operating Deflection Shapes
Springer Verlag | 2021|We present WaveAR, the first sensor-based augmented reality system for structural dynamic measurements of
...Verlag: Springer International Publishing, ChamSchlagwörter: Engineering -
Water Cavitation Peening by Ultrasonic Vibration for Improvement of Fatigue Strength of Stainless Steel Sheet
Springer Verlag | 2013|behavior in the tensile test has been measured using electronic speckle pattern interferometry. The optical fringe patterns by ESPI (Electronic ...Verlag: Springer International Publishing, ChamSchlagwörter: Engineering, Mechanical Engineering, Engineering Thermodynamics, Heat and Mass Transfer -
Warpage Measurement of Simulated Electronic Packaging Assembly
Springer Verlag | 2013|window was used to allow for optical measurements of an assembly under simulated production reflow conditions, and the results were compared to ...Verlag: Springer International Publishing, ChamSchlagwörter: Engineering -
Wake Modelling of Horizontal-Axis Wind Turbines Using Sparse Identification of Non-linear Dynamics (SINDy)
Springer Verlag | 2024|proposes an innovative application of the SINDy algorithm for deriving a dynamical model from the measurement data obtained using an optical method ...Schlagwörter: Engineering, Engineering Fluid Dynamics, Mechanical Engineering -
VISUAL ODOMETRY FOR PRECISION LUNAR LANDING
Springer Verlag | 2024|array of sensors that includes an inertial measurement unit (IMU), optical camera (OpCam), and a laser range finder sensor (LRFS) as well a ...Verlag: Springer International Publishing, ChamSchlagwörter: Engineering -
Visualization and Quantification of Quasi-Static and Dynamic Surface Slopes Using a Reflection-Mode Digital Gradient Sensor
Springer Verlag | 2014|topography are evaluated from the measured slopes. Subsequently, the method is demonstrated for studying a stress-wave dominant problem of a free ...Verlag: Springer International Publishing, ChamSchlagwörter: Optical metrology, Engineering, Microwaves, RF and Optical Engineering, Optics, Lasers, Photonics, Optical Devices -
Vision-Based Tracking of Human Body Motion
Springer Verlag | 2014|There is a lack of reliable models of dynamic loading of civil engineering structures, such as footbridges
...Verlag: Springer International Publishing, ChamSchlagwörter: Engineering, Mechanical Engineering -
Visio-Acoustic Data Fusion for Structural Health Monitoring Applications
Springer Verlag | 2020|techniques’ have been used for remote structural health monitoring, but the applicability of each technique has been limited by factors ranging from ...Verlag: Springer International Publishing, ChamSchlagwörter: Engineering, Optics, Lasers, Photonics, Optical Devices -
Vibration Modal Analysis by High-Speed and Accurate Shape Measurement Using One-Pitch Phase Analysis Method
Springer Verlag | 2018|authors have previously proposed a new method for shape measurement, i.e. the one-pitch phase analysis (OPPA) method using moiré topography. In ...Verlag: Springer International Publishing, ChamSchlagwörter: Engineering, Microwaves, RF and Optical Engineering, Mathematical and Computational Engineering, Optics, Lasers, Photonics, Optical Devices -
Vibration Mitigation on Engine Test Stands Using Conventional Analysis Techniques
Springer Verlag | 2014|A single cylinder optical engine run by an electric motor at a university engine research center was observed to
...Verlag: Springer International Publishing, ChamSchlagwörter: Engineering -
Very High-Cycle Fatigue Resistance of Shot Peened High-Strength Aluminium Alloys: Role of Surface Morphology
Springer Verlag | 2014|) fractography. The surface morphology modifications induced by shot peening were evaluated using an optical profilometer. The influence of surface ...Verlag: Springer International Publishing, ChamSchlagwörter: Engineering, Engineering Design -
Validating Complex Models Accurately and Without Contact Using Scanning Laser Doppler Vibrometry (SLDV)
Springer Verlag | 2021|The need to validate simulation models of complex mechanical structures has grown in importance for efficiency in
...Verlag: Springer International Publishing, ChamSchlagwörter: Engineering -
Using Sampling Moiré to Extract Displacement Information from X-Ray Images of Molten Salt Batteries
Springer Verlag | 2014|technique. This method worked for in situ testing of the batteries because of the inherent grid pattern of the battery layers when imaged with x ...Verlag: Springer International Publishing, ChamSchlagwörter: Engineering, Microwaves, RF and Optical Engineering, Optics, Lasers, Photonics, Optical Devices -
Using High-Resolution Measurements to Update Finite Element Substructure Models
Springer Verlag | 2018|Abstract Many methods have been proposed for updating finite element matrices using experimentally ...Verlag: Springer International Publishing, ChamSchlagwörter: Engineering, Engineering Acoustics, Optics, Lasers, Photonics, Optical Devices -
Using Crack Geometry to Determine Fracture Properties
Springer Verlag | 2021|in optical microscopy techniques and using a soft brittle hydrogel material, we can measure crack geometry on the micron scale. For glasses ...Verlag: Springer International Publishing, ChamSchlagwörter: Engineering, Mechanical Engineering, Engineering Design, Materials Engineering -
Using Anti-aliasing Camera Filters for DIC: Does It Make a Difference?
Springer Verlag | 2017|Abstract Aliased speckle patterns are a known problem for digital image correlation (DIC). By ...Verlag: Springer International Publishing, ChamSchlagwörter: Optical methods, Engineering, Optics, Lasers, Photonics, Optical Devices
Meine Suche schicken an (beta)
Schicken Sie ihre Suchanfrage (Suchterm ohne Filter) an andere Datenbanken, Portale und Kataloge, um ggf. weitere interessante Treffer zu finden:
Dimensions ist eine Datenbank für Abstracts und Zitate, die Informationen zu Forschungsförderungen mit daraus resultierenden Veröffentlichungen, Studien und Patenten verknüpft.
Im TIB AV-Portal können audiovisuelle Medien aus Wissenschaft und Lehre recherchiert und eigene wissenschaftliche Videos publiziert werden.
Im FID move kann nach fachspezifischer Literatur, Forschungsdaten und weitere Informationen aus der Mobilitäts- und Verkehrsforschung gesucht werden.
Der Open Research Knowledge Graph liefert strukturiert beschriebene Forschungsinhalte und macht diese vergleichbar.
Frei zugänglicher Ausschnitt der Verbunddatenbank K10plus des GBV und des SWB mit für die Fernleihe und Direktlieferdienste relevanten Materialien.