Analysis of Flow Additives in Laser-Based Powder Bed Fusion of Polymers: Implications for Flow Behavior, Processing, Temperature Profile, and Part Characteristics (Englisch)
- Neue Suche nach: Cholewa, S.
- Neue Suche nach: Jaksch, A.
- Neue Suche nach: Drummer, D.
- Neue Suche nach: Cholewa, S.
- Neue Suche nach: Jaksch, A.
- Neue Suche nach: Drummer, D.
In:
Solid Freeform Fabrication 2023: proceedings of the 34th Annual International Solid Freeform Fabrication Symposium - an Additive Manufacturing Conference
; 12-21
;
2023
- Aufsatz (Konferenz) / Elektronische Ressource
-
Titel:Analysis of Flow Additives in Laser-Based Powder Bed Fusion of Polymers: Implications for Flow Behavior, Processing, Temperature Profile, and Part Characteristics
-
Beteiligte:
-
Kongress:Annual International Solid Freeform Fabrication Symposium ; 34. ; 2023 ; Austin, Tex.
-
Erschienen in:
-
Verlag:
- Neue Suche nach: Laboratory for Freeform Fabrication, University of Texas at Austin
-
Erscheinungsort:[Austin, Tex.]
-
Erscheinungsdatum:2023
-
Medientyp:Aufsatz (Konferenz)
-
Format:Elektronische Ressource
-
Sprache:Englisch
- Neue Suche nach: 52.72 / 52.77
- Weitere Informationen zu Basisklassifikation
-
Schlagwörter:
-
Klassifikation:
-
Datenquelle:
Die Inhaltsverzeichnisse werden automatisch erzeugt und basieren auf den im Index des TIB-Portals verfügbaren Einzelnachweisen der enthaltenen Beiträge. Die Anzeige der Inhaltsverzeichnisse kann daher unvollständig oder lückenhaft sein.
- 1
-
A Comparison of Mechanical Properties from Natural and Process-Induced Interfaces in Filament Extrusion AM of Polymer BlendsChatham, Camden A. / Benza, Donald W. et al. | 2023
- 2
-
Analysis of Flow Additives in Laser-Based Powder Bed Fusion of Polymers: Implications for Flow Behavior, Processing, Temperature Profile, and Part CharacteristicsCholewa, S. / Jaksch, A. / Drummer, D. et al. | 2023
- 3
-
Benchmarking the Tensile Properties of Polylactic Acid (PLA) Recycled through Fused Granule Fabrication Additive ManufacturingAl-Nabhani, Dawood / Kassab, Ali / Habbal, Osama / Mohanty, Pravansu / Ayoub, Georges / Pannier, Christopher et al. | 2023
- 4
-
Determination and Compensation of the Shrinkage Behavior of Cylindrical Elements in the FDM ProcessKoers, T. / Magyar, B. et al. | 2023
- 5
-
Determination of Input Laser Energy for Melting Powder Layers of Various Thicknesses in High-Speed PBF-LB/P Using Near-Infrared Laser and AbsorbentYamauchi, Yuki / Kigure, Takashi / Niino, Toshiki et al. | 2023
- 6
-
Enhancing the Thermal Stability of Polyamide 6 in Powder Bed Fusion via Primary and Secondary Antioxidant IncorporationJaksch, A. / Cholewa, C. / Drummer, D. et al. | 2023
- 7
-
Fatigue Life Prediction of Functionally Graded TPU and PLA Components Produced by Material ExtrusionAlkunte, Suhas / Rajeshirke, Mithila / Huseynov, Orkhan / Fidan, Ismail et al. | 2023
- 8
-
Fundamentals of Polymer Crystallization in Laser Powder Bed Fusion for New Material ScreeningChatham, Camden A. / Talley, Samantha J. et al. | 2023
- 9
-
Fused Filament Fabrication of Polymer Blends with in Situ Layerwise Chemical ModificationsBenza, Donald / Chatham, Camden / Baker, Jonathon / Johnson, Devin et al. | 2023
- 10
-
Halogen-Free Flame-Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability AnalysisNeitzel, F. / Kletetzka, I. / Schmid, H.-J. et al. | 2023
- 11
-
Considerations of Internal Void Generation Process by Observation of Melting and Solidification Behavior in LowTemperature Laser Sintering of PEEKKigure, T. / Yamauchi, Y. / Niino, T. et al. | 2023
- 12
-
Investigation of the Processability of Polyether Block Amide in High Speed SinteringWimmer, Marco / Kemnitzer, Jan / Förster, David / Schorzmann, Johann / Döpper, Frank et al. | 2023
- 13
-
Magnetic Characterization of 3D Printed High-Performance Polyamide Magnetic CompositeArigbabowo, Oluwasola K. / Tate, Yash / Geerts, Wilhelmus J. et al. | 2023
- 14
-
Photothermal Bleaching of Nickel Dithiolene for Bright Multi-Colored 3D Printed PartsOlubummo, Adekunle / Zhao, Lihua / Hartman, Aja / Tom, Howard / Zhao, Yan / Wycoff, Kyle et al. | 2023
- 15
-
Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide 613 Composites Made by Laser SinteringKletetzka, I. / Neitzel, F. / Schmid, H.-J. et al. | 2023
- 16
-
Developing Additively Manufactured Iron Powder-Filled PLA CompositesKumar, Jeevan / Huseynov, Orkhan / Fidan, Ismail / Rajabali, Mustafa et al. | 2023
- 17
-
Effect of the Print Bed Temperature on Void Distribution and Fiber Orientation within the Microstructure of Short Carbon Fiber Reinforced/Abs Manufactured via Large Area Additive ManufacturingSayah, Neshat / Smith, Douglas E. et al. | 2023
- 18
-
Printing Hydrophobic Stainless Steel Graphene CompositesO’Donnell, M. / Budan, J. / McGuire, J. / Jalagam, P. / Kulkarni, Achyuth / Ansell, T. Y. et al. | 2023
- 19
-
Machine Learning-Assisted Prediction of Fatigue Behaviour in Fiber-Reinforced Composites Manufactured via Material ExtrusionRajeshirke, Mithila / Alkunte, Suhas / Huseynov, Orkhan / Fidan, Ismail et al. | 2023
- 20
-
Process and Material Optimizations for Integration of Chopped Glass Fibres in Laser Sintered Polymer PartsConinck, H. De / Dejans, A. / Meyers, S. / Buls, S. / Kinds, Y. / Soete, J. / Puyvelde, P. Van / Hooreweder, B. Van et al. | 2023
- 21
-
A Comparison of Microstructure and Mechanical Performance of Inconel 718 Manufactured via L-PBF, LP-DED, and WAAM TechnologiesAhmad, Nabeel / Bidar, Alireza / Ghiaasiaan, Reza / Gradl, Paul R. / Shao, Shuai / Shamsaei, Nima et al. | 2023
- 22
-
A Comparison of the Mechanical Behavior of AlSi7Mg Alloy Produced through Additive Manufacturing and Subjected to Different Heat Treatment and Aging ConditionsCaballero, K. / Medrano, V. A. / Arrieta, E. / Merino, J. / Ruvalcaba, B. / Ramirez, B. / Diemann, J. / Murr, L. E. / Wicker, R. B. / Godfrey, D. et al. | 2023
- 23
-
A Novel Coating Method Used to Enable Multilayer Structures with Microscale Selective Laser SinteringLiao, A. / Behera, D. / Cullinan, M. A. et al. | 2023
- 24
-
Effects of Different Parameters on DED HR-1 on Low Cycle Fatigue, Tensile Strength, and MicrostructureLares, J. / Godinez, D. / Arrieta, E. / Medina, F. / Wicker, R. / Gradl, P. / Katsarelis, C. et al. | 2023
- 25
-
Binder Evaporation during Powder Sheet Additive ManufacturingVolpp, J. / Zhang, W. / Abbott, W. / Coban, A. / McConnell, S. / Marola, S. / Casati, R. / Padamati, R. / Lupoi, R. et al. | 2023
- 26
-
Comparison of Layerwise Preheating and Post-Heating Laser Scan on the Microstructure and Mechanical Properties of L-PBF Ti6Al4VTanrikulu, Ahmet Alptug / Ganesh-Ram, Aditya / Farhang, Behzad / Amerinatanzi, Amirhesam et al. | 2023
- 27
-
Controlling Chemical Composition Changes in Laser Powder Bed Fusion of AlSi10MgLiu, Bochuan / Gibbons, Gregory J. et al. | 2023
- 28
-
Dissimilar Vacuum Brazing of Additive Manufactured 17-4Ph Stainless Steel to Conventional 304 and 17-4 Stainless Steel by BNI-2 Brazing Filler MaterialGöynük, T. / Onem, O. U. / Yasa, E. / Karakaya, İ. et al. | 2023
- 29
-
Effect of Heat Treatment on the Micro Structure and Mechanical Properties of Monel K500 Alloy Fabricated via L-PBF and LP-DEDNandi, Indrajit / Ghiaasiaan, Reza / Ahmad, Nabeel / Gradl, Paul R. / Shao, Shuai / Shamsaei, Nima et al. | 2023
- 30
-
Effect of Heat Treatments on the Tensile Properties of Additively Manufactured 15-5 PH Stainless SteelGusain, Rukesh / Gradl, Paul R. / Shao, Shuai / Shamsaei, Nima et al. | 2023
- 31
-
Effect of Surface State and Material on Surface Quality Enhancement by Dual Laser Powder Bed FusionOrdnung, D. / Metelkova, J. / Hooreweder, B. Van et al. | 2023
- 32
-
Effectiveness of Ex-Situ Heat Treatment of L-PBF AM 17-4PH Stainless Steel Specimens Intentionally Exposed to Different As-Built Thermal HistoriesHasbrouck, C. R. / Bartolai, Joseph / Pagan, Darren C. / Miller, Simon W. et al. | 2023
- 33
-
Effects of Build Orientation and Heat Treatment on the Porosity Distribution and Morphology Within Inconel 625 Fabricated via Laser Powder Bed FusionAndurkar, Mohanish / Prorok, Bart / Gahl, John / Thompson, Scott et al. | 2023
- 34
-
Embedding Temperature Sensors with the Use of Laser-Foil-Printing Additive ManufacturingTurk, T. / Dougan, M. / Hendrix, L. / Reed, A. / Dominguez, C. E. / Sutton, A. T. / Park, J. / Leu, M. C. et al. | 2023
- 35
-
Experimental Investigations of Inhomogeneous Component Properties in Laser-Based Additive Manufacturing of AlSi10MgCzink, S. / Schulze, V. / Dietrich, S. et al. | 2023
- 36
-
Exploring In718 Alloy Production with Bi-Directional Raster and Stochastic Spot Melting Techniques Using an Open-Source Electron Beam Melting SystemNabil, S. T. / Banuelos, C. / Ramirez, B. / Cruz, A. / Watanabe, K. I. / Arrieta, E. / Wicker, R. B / Medina, F. et al. | 2023
- 37
-
Formation of Easy-To-Remove Supports in Laser Powder Bed Fusion through Selective DopingSperry, M. G. / Carter, D. / Crane, N. B. / Nelson, T. W. et al. | 2023
- 38
-
Influence of Silane-Doped Argon Processing Atmosphere on Powder Recycling and Part Properties in L-PBF of Ti-6Al-4VEmminghaus, N. / Bernhard, R. / Hermsdorf, J. / Overmeyer, L. / Kaierle, S. et al. | 2023
- 39
-
Influence of Steel Alloy Composition on the Process Robustness of As-Built Hardness in Laser-Directed Energy DepositionKelley, J. P. / Newkirk, J. W. / Bartlett, L. N. / Sparks, T. / Isanaka, S. P. / Alipour, S. / Liou, F. et al. | 2023
- 40
-
Influence of TiC-Nanoparticles on the Material Properties of AlSi10Mg Manufactured by Laser Powder Bed FusionLubkowitz, V. / Scherer, T. / Schulze, V. / Zanger, F. et al. | 2023
- 41
-
Johnson-Cook Failure Model for Additively Manufactured 304L Stainless Steel PartsHaffner, H. A. / Rangapuram, M. / Dasari, S. K. / Isanaka, S. P. / Chandrashekhara, K. / Buchely, M. F. / Newkirk, J. W. et al. | 2023
- 42
-
Microstructural and Microhardness Variations of Laser Powder Bed Fusion (L-PBF) Additively Manufactured Inconel 718 Due to Machine Variability and Wall Thickness for Aerospace ApplicationsDoris, A. / Trujillo, L. / Godinez, D. / Arrieta, E. / Wicker, R. B. / Gradl, P. / Katsarelis, C. C. / Medina, F. et al. | 2023
- 43
-
Microstructure and Mechanical Properties of Additively Manufactured Haynes 282: A Comparative Analysis between Laser Powder Bed Fusion and Laser Powder Directed Energy Deposition TechnologiesAhmad, Nabeel / Ghiaasiaan, Reza / Gradl, Paul R. / Shao, Shuai / Shamsaei, Nima et al. | 2023
- 44
-
Nanoparticle-Modification of NiCu-Based Alloy 400 for Laser Powder Bed FusionRoth, J.-P. / Šulák, I. / Chlup, Z. / Fischer-Bühner, J. / Krupp, U. / Jahns, K. et al. | 2023
- 45
-
Novel Welding Strategy in High Deposition Rate Laser-Assisted Double-Wire Welding Process with Nontransferred ArcBiester, K. / Schwarz, N. / Hermsdorf, J. / Kaierle, S. et al. | 2023
- 46
-
Oxide Dispersion Strengthened (ODS) SS316L Prepared by Laser Powder Bed Fusion (L-PBF): Analysis of Microstructure and Hardness PropertiesMa, Changyu / Lin, Yu-Keng / Zheng, Tianqi / Mallory, Philip / Zhu, Jianhao / Wang, Y. Morris / Li, Xiaochun / Kang, Bruce / Li, Bingbing et al. | 2023
- 47
-
The Influence of Heat Treatments on the Microstructure and Tensile Properties of Additively Manufactured Inconel 939Gusain, Rukesh / Dodaran, Mohammad Soleimani / Gradl, Paul R. / Shamsaei, Nima / Shao, Shuai et al. | 2023
- 48
-
The Variation of Mechanical Properties of M300 Maraging Steel Manufactured with Varying Process Parameters in Laser Powder Bed FusionPetersen, Haley E. / Sampson, Brad J. / Failla, David P. Jr. / Priddy, Matthew W. / McClelland, Zackery B. et al. | 2023
- 49
-
Uniaxial Fatigue Behavior and Life Prediction of Additively Manufactured Inconel 718 with Different Grain MorphologyMuhammad, Muztahid / Soman, Sajith / Ahmad, Nabeel / Wells, Douglas N. / Shao, Shuai / Shamsaei, Nima et al. | 2023
- 50
-
Adapting a Design for Additive Manufacturing Workflow to Account for Continuous Carbon Fiber Reinforced PartsAdams, Gavin / Meisel, Nicholas et al. | 2023
- 51
-
Analytical Modeling of Cooling Rates in PBF LB/M of Bulk Metallic GlassesSchönrath, Hanna / Wegner, Jan / Frey, Maximilian / Soares-Barreto, Erika / Elspaß, Arno / Schnell, Norman / Erdmann, Benjamin H. R. / Neises, Julian / Ellendt, Nils / Busch, Ralf et al. | 2023
- 52
-
Demonstrating Paraflow: Interactive Fluid Dynamics Simulation with Real-Time Visualization for Augmented Resin 3D PrintingLipkowitz, Gabriel / Desimone, Joseph M. et al. | 2023
- 53
-
Depiction of Support Structures in Technical DrawingsLammers, S. / Koers, T. / Magyar, B. / Zimmer, D. / Lieneke, T. et al. | 2023
- 54
-
Energy Flow (Bond Graph) Dynamic Modeling of Cartesian-Frame FFF 3-D Printer GantrySharma, Maharshi A. / Patterson, Albert E. et al. | 2023
- 55
-
G-Wing: A Novel Software Tool for Toolpath-Centric Design of Wings for Material ExtrusionValenti, Justin D. / Bartolai, Joseph / Yukish, Michael A. et al. | 2023
- 56
-
Investigating the Effect of Generalized Newtonian Fluid on the Micro-Void Development within Large Scale Polymer Composite Deposition BeadsAwenlimobor, A. / Smith, D. E. / Wang, Z. et al. | 2023
- 57
-
Laser Beam Shape Optimization: Exploring Alternative Profiles to Gaussian-Shaped Laser Beams in Powder Bed Fusion of MetalsHolla, Vijaya / Kopp, Philipp / Grünewald, Jonas / Praegla, Patrick M. / Meier, Christoph / Wudy, Katrin / Kollmannsberger, Stefan et al. | 2023
- 58
-
Level Set Grids for Hybrid ManufacturingWhite, Liam / Quaife, Bryan / Borish, Michael / Adkins, Cameron / Roschli, Alex et al. | 2023
- 59
-
Methodical Approach to Reducing Design Time by Using Neural Networks in Early Stages of Concept DevelopmentOtt, M. / Meihöfener, N. / Mozgova, I. et al. | 2023
- 60
-
Modeling and Correcting Illumination Inhomogeneity over Multiple DLP Illumination Intensities for Better Fabrication AccuracySubedi, Saroj / Ware, Henry Oliver Tenadooah et al. | 2023
- 61
-
Modeling Carbon Fiber Suspension Dynamics for Additive Manufacturing Polymer Melt FlowsPierce, Jason B. / Smith, Douglas E. et al. | 2023
- 143
-
Digital Model Generation Strategy for Printing Miniaturized Replica of Historical Cast Iron Objects - A Use Case StudyBorstell, D. / Friedhofen, B. / Kunz, D. et al. | 2023
- 62
-
Multi-Physics Modeling of Low-Temperature Directed Energy Deposition of Stainless Steel 316LMN, Kishore / Qian, Dong / Li, Wei et al. | 2023
- 63
-
Novel Concepts to Integrate Dense and Sparse Infill Regions in Material Extrusion AM PartsHutton, Logan J. / Bartolai, Joseph et al. | 2023
- 64
-
Optimization of Computational Time for Digital Twin Database in Directed Energy Deposition for Residual StressesTariq, Usman / Joy, Ranjit / Wu, Sung-Heng / Mahmood, Muhammad Arif / Woodworth, Michael M. / Liou, Frank et al. | 2023
- 65
-
Part Scale Simulation of Heat Affected Zones for Parameter Optimization in a Microscale Selective Laser Sintering SystemGrose, J. / Liao, A. / Tasnim, F. / Foong, C. S. / Cullinan, M. A. et al. | 2023
- 66
-
Path Planning for Non-Planar Robotic Additive ManufacturingGeuy, Michael / Martin, Jay / Simpson, Timothy / Meisel, Nicholas et al. | 2023
- 67
-
Predicting Temperature Field for Metal Additive Manufacturing Using PINNPeng, B. / Panesar, A. et al. | 2023
- 68
-
Process Modeling of Multi-Material Laser Powder Bed FusionGriffis, J. C. / Shahed, K. S. / Okwudire, C. E. / Manogharan, G. P. et al. | 2023
- 69
-
Single Path Generation for Closed Contours via Graph Theory and Topological HierarchyBorish, Michael / Roschli, Alex / Wade, Charles / Post, Brian / White, Liam / Adkins, Cameron et al. | 2023
- 70
-
System Identification of Fused Filament Fabrication Additive Manufacturing Extrusion and Spreading DynamicsHabbal, Osama / Kassab, Ali / Ayoub, Georges / Mohanty, Pravansu / Pannier, Christopher et al. | 2023
- 71
-
Thermal Simulation of the Material Extrusion Process with Different Print Bed Boundary ConditionsHuseynov, Orkhan / Ali, Mohammad Al-Shaikh / Fidan, Ismail et al. | 2023
- 72
-
Transmitting G-Code with Geometry Commands for Extrusion Additive ManufacturingRoschli, Alex / Borish, Michael / White, Liam / Adkins, Cameron / Atkins, Celeste / Barnes, Abigail / Post, Brian / DiVencenzo, Zac / Dwyer, Charlie / Rudiak, Gaven et al. | 2023
- 73
-
Voxel-Free Radon Transform for Improving Surface Quality in Computed Axial LithographyYe, Jennings Z. / Sun, Yaxuan (X) / Taylor, Hayden et al. | 2023
- 74
-
Control of Track Morphology in Digital Glass FormingCapps, Nicholas / Goldstein, Jonathan / Landers, Robert / Kinzel, Edward et al. | 2023
- 75
-
Non-Linear Dynamic Modeling of Cartesian-Frame FFF 3-D Printer Gantry for Predictive ControlSharma, Maharshi A. / Patterson, Albert E. et al. | 2023
- 76
-
A Solid Free Form Fabrication Equipment to Manufacture Axisymmetric Parts with Improved Surface QualityDwivedi, Rajeev / Dwivedi, Indira / Panwar, Arihant / Dwivedi, Bharat et al. | 2023
- 77
-
Comparative Analysis of Process Stability in PBF-LB/M: (Thermal) Highspeed Imaging Vs. Melt Pool Monitoring Using Novel Gas MixturesDeckers, T. / Wolf, F. / Forêt, P. / Witt, G. / Kleszczynski, S. et al. | 2023
- 78
-
Development of Joint Manufacturing and In-Line Metrology System for the Patterning of 3D Holographic Structures in Roll-to-Roll ProcessesGroh, Barbara / Lee, Kwon Sang / Cullinan, Michael / Chang, Chih-Hao et al. | 2023
- 79
-
Development of Multimaterial Additive Manufacturing Systems for Embedded ElectronicsVath, Carson / Billah, Kazi Masum / Manogharan, Guhaprasanna et al. | 2023
- 80
-
Development of Soft Gripper Pneumatic Control System Based on Deep Reinforcement LearningKim, Seongyeon / Kim, Kiseong / Shin, Jongho et al. | 2023
- 81
-
Distributed Optical Fiber Testing for Additive ManufacturingHlifka, Brian M. / Kinzel, Edward C. et al. | 2023
- 82
-
Embedding Fiber Optic Sensors in Metal Components via Direct Energy DepositionSnider, Elias B. / Saha, Rony Kumer / Dominguez, Cesar / Huang, Jie / Bristow, Douglas A. et al. | 2023
- 83
-
Experimental and Computational Study of Area Printing™ Additive Manufacturing: Inconel 718 and M300 Maraging Steel Density ImprovementFotovvati, B. / Shrestha, S. / Ferreri, N. / Duanmu, N. et al. | 2023
- 84
-
Exploring a Supervisory Control System Using ROS2 and IoT SensorsRoach, M. A. / Penney, J. / Jared, B. H. et al. | 2023
- 85
-
High Speed Video Imaging of Overhang Surfaces in Beam Shaped Laser Powder Bed Fusion of 316L Stainless SteelVanmunster, L. / Dejans, A. / Hooreweder, B. Van / Vrancken, B. et al. | 2023
- 86
-
High-Precision Measurement of Melt Pool Properties during Laser-Based Powder Bed Fusion of Metals by High-Speed ImagingElspaß, A. / Wegner, Jan / Schönrath, Hanna / Horstjann, Niklas / Kleszczynski, S. et al. | 2023
- 87
-
In-Situ Electrical Resistance Measurements for Soldering Studies in Hybrid AMPustinger, Alexander P. / Corral, Joselin / Villegas, Arianna / Espalin, David et al. | 2023
- 88
-
In-Situ Reinforcement Processing for Laser Powder Bed Fused Ti64 PartsGanesh-Ram, A. / Tanrikulu, A. A. / Valdez-Loya, O. / Davidson, P. / Ameri, A. et al. | 2023
- 89
-
Investigation of Instrumenting Robocasting Printer for Ceramic SlurriesMcCleary, J. / Durand, N. / Castillo-Perez, L. / Medina-Zorrosa, G. / Garcia-Chavira, J. P. / Espalin, D. et al. | 2023
- 90
-
Investigation of Multi-Material Liquid Metal Jetting with Copper MaterialsPloetz, M. / Heckmeier, F. / Kirchebner, B. / Volk, W. / Lechner, P. et al. | 2023
- 91
-
Investigation of the Influence of Process Parameters on Productivity in the LPBF Process for the Material Inconel 718Bödger, C. / Gnaase, S. / Lehnert, D. / Tröster, T. et al. | 2023
- 92
-
Laser Induced Breakdown Spectroscopy for In-Situ Monitoring of Laser Powder Bed Fusion ProcessingKrantz, Justin T. / Lough, Cody S. / Brown, Ben / Yang, Jinyu / Go, David B. / Landers, Robert G. / Kinzel, Edward C. et al. | 2023
- 93
-
Layer-Wise In-Process Monitoring-And-Feedback System Based on Surface Characteristics Evaluated by Machine-Learning-Generated CriteriaIkeshoji, T.-T. / Yonehara, M. / Aoyagi, K. / Yamanaka, K. / Chiba, A. / Kyogoku, H. / Hashitani, M. et al. | 2023
- 94
-
Liquid Metal Jetting of Aluminum Parts with Salt Support StructuresKirchebner, Benedikt / Weidner, Christoph / Ploetz, Maximilian / Rehekampff, Christoph / Volk, Wolfram / Lechner, Philipp et al. | 2023
- 95
-
Lost-PLA Casting Process Development Using Material Extrusion with Low-Weight PLAAli, Mohammad Alshaikh / Huseynov, Orkhan / Fidan, Ismail / Vondra, Fred et al. | 2023
- 96
-
Mechanically Bonding and Thermally Releasing Print Surface for Big Area Additive ManufacturingWeflen, E. D. / Peters, F. E. / Frank, M. C. et al. | 2023
- 97
-
Method to Balance Thermals for Multi-Functional 3D MJF PrintingHartman, Aja / Zhao, Lihua et al. | 2023
- 98
-
Parametric Analysis of Deposition Pressure Controlled Multi-Axis Free-Form FabricationKyriazis, N. / Eine, J. / Thakur, A. R. et al. | 2023
- 99
-
Multiple 450 nm Diode Laser Processing of Ti64 PowderCaglar, H. / Liang, A. / Mumtaz, K. et al. | 2023
- 100
-
Physical Validation of Job Placement Optimization in Cooperative 3D PrintingMensch, Cole / Zhou, Wenchao / Sha, Zhenghui et al. | 2023
- 101
-
Printing Parameter Optimization of Extruded Metal Paste by Response Surface TechniqueNorris, Marshall / Fidan, Ismail et al. | 2023
- 102
-
Probing Temperature and Degree-of-Conversion States via Tomographic Fluorescence ImagingLuk, Sui Man / Li, Chi Chung / Toombs, Joseph / Beer, Martin de / Taylor, Hayden et al. | 2023
- 103
-
Process Modeling for Fluid-Interface Supported Resin PrintingAppana, S. / Ross, S. M. / Sims, C. / Schwerzel, R. / Jariwala, A. S. et al. | 2023
- 104
-
Robot-Aided Selective Embedding of a Spatially Steered Fiber in Polymer Composite Parts Made Using Vat PhotopolymerizationKhatua, Vivek / Gurumoorthy, B. / Ananthasuresh, G. K. et al. | 2023
- 105
-
Role of In-Situ Monitoring Technique for Digital Twin Development Using Direct Energy Deposition: Melt Pool Dynamics and Thermal DistributionWu, Sung-Heng / Joy, Ranjit / Tariq, Usman / Mahmood, Muhammad Arif / Liou, Frank et al. | 2023
- 106
-
Spreading and Packing of Alumina Powder Using a Displacement-Controlled Roller in SLFSBayazitoglu, Kaya J. / Cassoli, Matthew / Beaman, Joseph J. / Kovar, Desiderio et al. | 2023
- 107
-
State-of-the-Art Cyber-Enabled Physical and Digital Systems Deployed in Distributed Digital Factory Using Additive and Subtractive Manufacturing Systems: Open, Scalable, and Secure FrameworkJoy, Ranjit / Wu, Sung-Heng / Tariq, Usman / Mahmood, Muhammad Arif / Isanaka, Sriram Praneeth / Malik, Asad Waqar / Liou, Frank et al. | 2023
- 108
-
Static Mixing Nozzles for Long and Short Fiber Additive Extrusion ProcessesSmith, Tyler / Copenhaver, Katie / Lamm, Meghan / Brackett, James / Kumar, Vipin / Hershey, Christopher / Joslin, Chase / Lindahl, John / Tobin, Jim / Rodriguez, Brittany A. et al. | 2023
- 109
-
Testing Protocol Development for Fracture Toughness of Parts Built with Big Area Additive ManufacturingGarcia, J. P. / Camacho, L. A. / Hasanyana, A. / Espalin, D. et al. | 2023
- 110
-
Time-Optimal Path Planning for Heterogeneous Robots in Swarm ManufacturingStone, Ronnie F. P. / Wang, Junmin / Sha, Zhenghui et al. | 2023
- 111
-
Toward Voxel Level Control for Laser Powder Bed Fusion Additive Manufacturing ProcessesYeung, Ho / Neira, Jorge et al. | 2023
- 112
-
Use of a Vibrating Build Platform during Powder-Bed Fusion of Metals Using a Laser BeamHantke, N. / Grimm, T. / Sehrt, J. T. et al. | 2023
- 113
-
A Small Volume, Local Shielding Gas Chamber with Low Gas Consumption for Laser Wire Additive Manufacturing of Bigger Titanium PartsBarroi, A. / Schwarz, N. / Hermsdorf, J. / Bielefeld, T. / Kaierle, S. et al. | 2023
- 114
-
A Spherical Test Artifact to Evaluate Three-Dimensional Form Accuracy for Wire Arc Additive ManufacturingKo, S. / Sagawa, T. / Yamagata, Y. / Aoki, S. / Abe, T. et al. | 2023
- 115
-
Additive Manufacturing of ODS Steels Using Powder Feedstock Atomized with Elemental YttriumYang, Seongun / Xu, Donghua / Yan, Dongqing / Albert, Marc / Pasebani, Somayeh et al. | 2023
- 116
-
Comparison of Process Control Methods for Wire-Arc Directed Energy Deposition of Low Carbon Steels with In-Situ Temperature MeasurementAmeen, Ahamed / Janik, Vit / Nicholas, Joanna / Zhang, Xiang / Seow, Cui Er et al. | 2023
- 117
-
Exploratory Study of In-Space Wire Arc Additive Manufacturing with Modeling ApproachLi, Wei / Bouzolin, Dan / Nagaraja, Kishore Mysore et al. | 2023
- 118
-
Multi-Bead and Multi-Layer Printing Geometric Defect Identification Using Single Bead Trained ModelsSurovi, N. A. / Soh, G. S. et al. | 2023
- 119
-
NASA Technology Maturation Plan for In-Space Manufacturing of MetalsRoberts, Christopher E. / Ledbetter, Frank / Jones, Jennifer M. / Courtright, Zach / Blanchard, Alexander et al. | 2023
- 120
-
On Process Stability in WAAM-CMT of Aluminum AlloysThien, Austen / Kelly, Kathryn M. / Massey, Caroline E. / Saldana, Christopher J. et al. | 2023
- 121
-
Process-Integrated Alloy Adjustment in Laser Deposition Welding with Two WiresBudde, L. / Schwarz, N. / Hermsdorf, J. / Kaierle, S. / Overmeyer, L. et al. | 2023
- 122
-
Resource Efficiency of the Robot-Based Hybrid Additive Manufacturing ChainTepper, C. / Utsch, J. / Zarges, J. / Weigold, M. et al. | 2023
- 123
-
The Effect of Thermal Conditions on Process Defects in Electron Beam Directed Energy DepositionAman, R. / Kitt, A. / Corey, Z. / Mohr, L. / Ruscitto, D. / Iyer, N. / Rosenberger, B. et al. | 2023
- 124
-
Toolpath Planning Approach for Parts with Multiple Revolving Features for Wire Arc Additive ManufacturingLim, Wei Sheng / Soh, Gim Song et al. | 2023
- 125
-
Wire Arc Additive Manufacturing in Steel FoundriesWeflen, E. D. / Frank, M. C. / Peters, F. E. et al. | 2023
- 126
-
Equalization of Metal Powder for Binder Jet PrintingNiu, Michelle / Nauka, Krzysztof et al. | 2023
- 127
-
Fiber-Reinforcement of Binder-Jetted Casting Molds for Multiple UsageAngenoorth, J. / Rumschöttel, D. / Leitner, B. / Schumm, V. / Ettemeyer, F. / Ünsal, I. / Günther, D. et al. | 2023
- 128
-
Slurry-Based Binder Jetting of Ceramic Casting CoresErhard, P. / Volk, W. / Guenther, D. et al. | 2023
- 129
-
Automated Layer Identification in Large Area Additive Manufacturing (LAAM): A Comparison of Image Thresholding and Edge Detection TechniquesWadidie, A. / Studer, G. M. / Villez, K. et al. | 2023
- 130
-
Dreaming of Data: Examining Data Augmentation for Machine Learning in Additive ManufacturingWilliams, Glen / Baldwin, Martha / Simpson, Timothy W. / Meisel, Nicholas A. / McComb, Christopher et al. | 2023
- 131
-
Usage of Unconventional Data Sources for Market Intelligence (MI) in the Field of Additive Manufacturing (AM) - Expert Networks, Technology Territories and TrendsZiegler, S. / Schleifenbaum, J. H. et al. | 2023
- 132
-
3D Printed Intelligently Graded Functional Stiffness Foam for Sturdier Multi Stiffness MaterialsEmery, B. A. / Revier, D. / Sarkar, V. / Nakura, M. / Lipton, J. I. et al. | 2023
- 133
-
3D Printing of Complex Wire Geometries for Tailored Resistance ResponsePhillips, Tim / Allison, Jared / Beaman, Joseph et al. | 2023
- 134
-
3D Printing of Passive Microfluidic Flow Mixers Using Triply Period Minimal Surface Microlattice StructuresMohammed, Mazher Iqbal et al. | 2023
- 135
-
Additive Manufacturing of Hybrid Sandwich Sheets by Laser Powder Bed Fusion of MetalsPlatt, S. / Schnell, N. / Witt, G. / Kleszczynski, S. et al. | 2023
- 136
-
Additive Manufacturing of Person Specific Diabetic Foot Insoles with Adjustable Cushioning Properties Using TPMS Lattice StructuresClaybrook, F. R. / Southee, D. J. / Mohammed, M. I. et al. | 2023
- 137
-
An Adaptive Meshing Framework Using Octree Data Structure for Voxel Based MeshesChalavadi, Pradeep et al. | 2023
- 138
-
Bio-Inspired AM Structure with Carbon Fibre ReinforcementJameekornkul, P. / Panesar, A. et al. | 2023
- 139
-
Characterizing Thermomechanical Properties of Large-Format Printed Composite Polymer StructuresCorum, Tyler / O'Connell, Johnna / Heres, Maximilian / Foote, Jeff / Duty, Chad et al. | 2023
- 140
-
Comparison of Surface Texture from Various Surface Morphology Techniques for Evaluating as-Built Ti6Al4V Laser Powder Bed FusionCruz, Alex De La / Medina, Francisco / Arrieta, Edel / Weston, Luke / Benedict, Mark / Gibson, Thao et al. | 2023
- 141
-
Design for Internal Lattice Structures with Application in Additive ManufacturingPalomino, Donald / McClelland, Ryan / Grau, Mike / Watkins, Ryan / Li, Bingbing et al. | 2023
- 144
-
Discovery of Next-Generation Battery Electrodes Using Topology OptimisationImediegwu, Chikwesiri / Shaffer, Milo / Ryan, Mary / Panesar, Ajit et al. | 2023
- 145
-
Effect of Inter-Layer Dwell Time on Residual Stresses in Directed Energy Deposition of High Strength Steel AlloyJoy, Ranjit / Wu, Sung-Heng / Tariq, Usman / Mahmood, Muhammad Arif / Liou, Frank et al. | 2023
- 146
-
Effect of Printing Parameters on the Internal Geometry of Products Manufactured by Fused Filament Fabrication (FFF)Moreno-Núñez, Benjamín A. / Treviño-Quintanilla, Cecilia D. / Espinoza-García, Juan Carlos / Uribe-Lam, Esmeralda / Cuan-Urquizo, Enrique et al. | 2023
- 147
-
Evaluating the Compressive Strength of AM Risers for Green Sand MetalcastingHasbrouck, C. R. / Melnik, Samantha A. et al. | 2023
- 148
-
Experimental and Numerical Investigations on Dynamic Mechanical Properties of TPMS StructuresPokkalla, Deepak Kumar / White, Brandon Turner / Wang, Jier / Spencer, Ryan / Panesar, Ajit / Kim, Seokpum / Vaidya, Uday et al. | 2023
- 149
-
Experimental Characterization of the Mechanical Properties of 3D Printed Bézier-Based Lattice BeamsÁlvarez-Trejo, A. / Cuan-Urquizo, E. / Roman-Flores, A. et al. | 2023
- 150
-
Experimental Evaluation of Hierarchical Functionally Graded Lattices Using Digital Image Correlation and Micro-CTYe, Junyang / Babazadeh-Naseri, Ata / Fregly, Benjamin J. / Higgs, C. Fred III et al. | 2023
- 151
-
Fatigue Endurance Investigation of Post-Processed Surfaces of L-PBF Ti-6Al-4V under Flexural StressBanuelos, C. / Ramirez, B. / Cruz, A. De la / Nabil, S. T. / Arrieta, E. G. / Wicker, R. B. / Medina, F. et al. | 2023
- 152
-
Guided Manual Design for Additive Manufacturing of Topologically Optimized Legacy Tooling PartsLuben, Hannah / Meisel, Nicholas et al. | 2023
- 153
-
Hybrid Geometry/Property Autoencoders for Multi-Lattice TransitionsBaldwin, Martha / Meisel, Nicholas A. / McComb, Christopher et al. | 2023
- 154
-
Improving the Mechanical Response of the IWP Exo-Skeletal Lattice through Shape OptimizationFisher, Joseph W. / Miller, Simon W. / Bartolai, Joseph / Simpson, Timothy W. et al. | 2023
- 155
-
In-Situ Defect Detection for Laser Powder Bed Fusion with Active Laser ThermographyBreese, P. P. / Becker, T. / Oster, S. / Metz, C. / Altenburg, S. J. et al. | 2023
- 156
-
Machine Learning Assisted Mechanical Metamaterial Design for Additive ManufacturingWang, Jier / Panesar, Ajit et al. | 2023
- 157
-
Material Jetting of Suspension System ComponentsLipton, Jeffrey I et al. | 2023
- 158
-
Materials Screening Methodology for Additive Manufacturing in Bioreactor TechnologySchorzmann, J. / Gerstl, H. / Tan, Z. / Sprenger, L. / Lu, H.-H. / Taumann, S. / Wimmer, M. / Boccaccini, A. R. / Salehi-Müller, S. / Döpper, F. et al. | 2023
- 159
-
Mechanical Surface Treatment of Polymer Parts Produced by FFFDietrich, S. / Karcher, B. / Popp, U. / Scholz, J. et al. | 2023
- 160
-
Out-of-Plane Mechanical Properties of Additively Manufactured Fractal Reinforced StructuresMartínez-Magallanes, Mario / Cuan-Urquizo, Enrique / Ramírez-Cedillo, Erick / Roman-Flores, Armando et al. | 2023
- 161
-
Residual Stress and Deformation Analysis of Inconel 718 across Varying Overhangs in Laser Powder Blown Directed Energy DepositionHernandez, A. J. / Garcia, D. / Watanabe, K. I. / Gradl, P. R. / Wheeler, K. / Hafiychuk, Halyna / Wicker, R. B. / Medina, F. et al. | 2023
- 162
-
Strength Enhancement of Cellular Structures through Selective Reinforcement of Elements Based on Analytical ModelingKoju, Naresh / Yang, Li et al. | 2023
- 163
-
Thermal Stress Prediction in Laser Powder Bed FusionLiu, Tao / Kinzel, Edward C. / Leu, Ming C. et al. | 2023
- 164
-
Towards Experimental Process Parameter Development for Ti-6Al-4V TPMS Lattice Structures with Application to Small Scale Dental Implants Using MicrographsJahn, A. / Li, H. / Emminghaus, N. / Melnyk, T. / Hermsdorf, J. / Kaierle, S. et al. | 2023
- 165
-
Towards the Limits in Copper Lattice Production via Fiber Laser Powder Bed FusionSmet, M. / Li, G. / Goossens, L. R. / Buls, S. / Hooreweder, B. Van et al. | 2023
- 166
-
Development of Highly Filled Bio-Based Composites for Sustainable, Low-Cost Feedstock: Processing Effects on Porosity and Fiber AlignmentCopenhaver, Katie / Lamm, Meghan / Hubbard, Amber et al. | 2023
- 167
-
Streaming in Additive Manufacturing: Analyzing the Impact on the Powder Bed Fusion of Metals Process ChainKolter, M. / Schleifenbaum, J. H. et al. | 2023
- 168
-
Design For(e!) Additive Manufacturing: in Search of a Comprehensive Design Challenge Suitable across AM EducationMeisel, Nicholas et al. | 2023
- 169
-
Development of 3D Printable Part Library for Easy to Manufacture Components for Educational and Competitive RoboticsDwivedi, Indira / Dwivedi, Rajeev / Dwivedi, Bharat / Rebbapragada, Arun / Rebbapragada, Arka et al. | 2023
- 170
-
Development of a Testbench for Additive Manufacturing Data Integration, Management, and AnalyticsYang, Chen-Wei / Kuan, Alexander / Li, Sheng-Yen / Lu, Yan / Kim, Jaehyuk / Cheng, Fan-Tien / Yang, Haw-Ching et al. | 2023
- 142
-
Design of Spatially Varying Orientation Lattice Structures Using Triply Periodic Minimal SurfacesWei, Chongyi / Smith, Douglas E. et al. | 2023