The mechanics of the “eye”- Specimen bend test investigated by experiment and FE-analysis (Englisch)
- Neue Suche nach: Valberg, Henry
- Neue Suche nach: Langøy, Morten
- Neue Suche nach: Nedreberg, Mette
- Neue Suche nach: Helvig, Torgeir
- Neue Suche nach: Valberg, Henry
- Neue Suche nach: Langøy, Morten
- Neue Suche nach: Nedreberg, Mette
- Neue Suche nach: Helvig, Torgeir
- Neue Suche nach: Galdos, Lander
- Neue Suche nach: Arrazola, Pedro
- Neue Suche nach: de Argandoña, Eneko Saenz
- Neue Suche nach: Otegi, Nagore
- Neue Suche nach: Mendiguren, Joseba
- Neue Suche nach: Madariaga, Aitor
- Neue Suche nach: de Buruaga, Mikel Saez
In:
AIP Conference Proceedings
;
2113
, 1
;
6
;
2019
- Aufsatz (Zeitschrift) / Elektronische Ressource
-
Titel:The mechanics of the “eye”- Specimen bend test investigated by experiment and FE-analysis
-
Beteiligte:Valberg, Henry ( Autor:in ) / Langøy, Morten ( Autor:in ) / Nedreberg, Mette ( Autor:in ) / Helvig, Torgeir ( Autor:in ) / Galdos, Lander ( Herausgeber:in ) / Arrazola, Pedro ( Herausgeber:in ) / de Argandoña, Eneko Saenz ( Herausgeber:in ) / Otegi, Nagore ( Herausgeber:in ) / Mendiguren, Joseba ( Herausgeber:in ) / Madariaga, Aitor ( Herausgeber:in )
-
Erschienen in:AIP Conference Proceedings ; 2113, 1 ; 6
-
Verlag:
- Neue Suche nach: AIP Publishing LLC
-
Erscheinungsdatum:02.07.2019
-
Format / Umfang:6 pages
-
ISSN:
-
DOI:
-
Medientyp:Aufsatz (Zeitschrift)
-
Format:Elektronische Ressource
-
Sprache:Englisch
-
Schlagwörter:
-
Datenquelle:
Inhaltsverzeichnis – Band 2113, Ausgabe 1
Zeige alle Jahrgänge und Ausgaben
Die Inhaltsverzeichnisse werden automatisch erzeugt und basieren auf den im Index des TIB-Portals verfügbaren Einzelnachweisen der enthaltenen Beiträge. Die Anzeige der Inhaltsverzeichnisse kann daher unvollständig oder lückenhaft sein.
-
An approach for rapid prediction of textile draping results for variable composite component geometries using deep neural networksZimmerling, Clemens / Trippe, Daniel / Fengler, Benedikt / Kärger, Luise et al. | 2019
-
Simulation of resin-impregnation, heat-transfer and cure in a resin-injection pultrusion processSandberg, Michael / Rasmussen, Filip S. / Hattel, Jesper H. / Spangenberg, Jon et al. | 2019
-
Stamp forming of thermoplastic automated fiber placement blanks: Influence of layup parameters on part qualityZenker, Thomas / Schön, Sebastian et al. | 2019
-
Analysis of inter-ply friction in consolidation process of thermoset woven prepregsRashidi, A. / Keegan, C. / Milani, A. S. et al. | 2019
-
Application of the Sehitoglu’s model for the calculation of tool life in thixoforging of steel partsBehrens, B.-A. / Chugreev, A. / Hootak, M. et al. | 2019
-
A micro-thermo-mechanical model for a tailored formed joining zone deformed by die forgingBaldrich, M. / Aldakheel, F. / Beese, S. / Löhnert, S. / Wriggers, P. et al. | 2019
-
Improving the mechanical properties of laser beam welded hybrid workpieces by deformation processingBehrens, B.-A. / Amiri, A. / Duran, D. / Nothdurft, S. / Hermsdorf, J. / Kaierle, S. / Ohrdes, H. / Wallaschek, J. / Hassel, T. et al. | 2019
-
Numerical modeling of the development of intermetallic layers between aluminium and steel during co-extrusionBehrens, B.-A. / Klose, C. / Thürer, S. E. / Heimes, N. / Uhe, J. et al. | 2019
-
Micro-joining of shaped stainless steel sheets for fuel injection orifice with high misting capabilityAizawa, Tatsuhiko / Satoh, Tomoki / Shiratori, Tomomi et al. | 2019
-
Experimental and numerical investigations of joining by electromagnetic forming for aeronautical applicationsLueg-Althoff, Joern / Beu, Marcel-André / Güzel, Ahmet / Rohr, Thomas / Hahn, Marlon / Tekkaya, A. Erman et al. | 2019
-
Characterizing multi-pass conditions for roll bonding of aluminum alloysKrämer, Alexander / Liu, Zhao / Karhausen, Kai / Aretz, Holger / Teller, Marco / Hirt, Gerhard et al. | 2019
-
Phenomena of forming and failure in joining hybrid structures – Experimental and numerical studies of clinching thermoplastic composites and metalVorderbrüggen, Julian / Gröger, Benjamin / Kupfer, Robert / Hoog, Arne / Gude, Maik / Meschut, Gerson et al. | 2019
-
The influence of silicon in EN AW 6082 alloys on the bond strength in cold pressure weldingGerlitzky, Christiane / Arbo, Siri Marthe / Westermann, Ida / Groche, Peter et al. | 2019
-
Novel approach in cold forging for efficient manufacturing of shaft-hub-assembliesMeissner, Robert / Liewald, Mathias / Weiss, André / Deliktas, Tahsin et al. | 2019
-
Forging residual heat exploitation feasibility for annealing treatments in space restricted lay-outsBerriozabalgoitia, Itziar / Valbuena, Oscar / Artola, Garikoitz et al. | 2019
-
A finite element approach to the integrated modelling of the incremental forming of friction stir welded sheetsTucci, Fausto / Valente, Robertt Angelo Fontes / de Sousa, Ricardo J. Alves / Rubino, Felice / Carlone, Pierpaolo et al. | 2019
-
Laser surface pre–treatment of polyolefin substrates for adhesive bondingMandolfino, Chiara / Pizzorni, Marco / Lertora, Enrico / Gambaro, Carla et al. | 2019
-
Finite-element simulations of Al7075-T6 orthogonal cutting: Effect of part geometry and mesh on chip morphology and formation mechanismBenhassine, Mehdi / Rivière-Lorphèvre, Edouard / Arrazola, Pedro-Jose / Gobin, Pierre / Granjon, Aurélie / Aizpuru, Ohian / Ducobu, François et al. | 2019
-
Study of the one-shot drilling of CFRP/Ti6Al4V stacks with a double tip angle cutting-tool geometryBañon, F. / Sambruno, A. / Batista, M. / Fernandez-Vidal, S. R. / Salguero, J. et al. | 2019
-
Study of the roughness of carbon fiber-reinforced composite plates in peripheral cryogenic millingDomingo, Rosario / Marin, Marta M. / de Agustina, Beatriz et al. | 2019
-
Post-machining distortion mitigation via bending straightening, a multiparametric ROM studyMena, Ramiro / Aguado, José V. / Guinard, Stéphane / Huerta, Antonio et al. | 2019
-
Parametrization of bi-parametric friction models through inverse modelling of conical tube-upsetting testsHenze, Michel / Teller, Marco / Hirt, Gerhard et al. | 2019
-
Development of a simulation method for the prediction of transmission errors of injection molded spur gearsSchubert, Dominik / Hertle, Sebastian / Kleffel, Tobias / Drummer, Dietmar et al. | 2019
-
The effect of processing parameters on formability of 3D printed AISI 316LIso-Junno, Terho / Jokelainen, Tero / Jaskari, Matias / Keskitalo, Markku / Mäntyjärvi, Kari et al. | 2019
-
Forming and formability of 3D printed thermoplasticsMustakangas, Aappo / Iso-Junno, Terho / Jokelainen, Tero / Keskitalo, Markku / Mäntyjärvi, Kari et al. | 2019
-
Laser surface texturing for the improvement of press-fit joint bond strengthUbani, Solomon / Obeidi, Muhannad. A. / Brabazon, Dermot et al. | 2019
-
Mechanical characterization by traction and small punch tests of ultra-fine grained AISI 316L with bimodal grain size distributionsKeller, C. / Flipon, B. / Diez, M. / Serrano, M. et al. | 2019
-
Heating effect on the forming behaviour of high nitrogen steel in bulk formingKuball, Clara-Maria / Merklein, Marion et al. | 2019
-
Influence of the characteristics of the 3D FE mesh on the evolution of variables used to characterize the stress stateBrito, J. P. / Oliveira, M. C. / Neto, D. M. / Alves, J. L. / Menezes, L. F. et al. | 2019
-
The formability prediction of twinning–induced plasticity steelsButuc, M. C. / Vincze, G. / Barlat, F. et al. | 2019
-
Development of delayed cracking evaluation method for meta-stable austenitic stainless steelsJung, Hanyong / Kim, Sangseok / Ahn, Deokchan / Chung, Yangjin et al. | 2019
-
Numerical prediction of force and energy consumption in roll forming processesde Argandoña, Eneko Saenz / Mendiguren, Joseba / Galdos, Lander / Otegi, Nagore / Trinidad, Javier / Armendariz, Alain et al. | 2019
-
Investigations of the properties of fiber-metal laminates with stiffening rib embossed by the incremental sheet forming technologyKubit, Andrzej / Zielecki, Władysław / Kudelski, Rafał / Drabczyk, Mateusz et al. | 2019
-
256 shades of gray: Application of image processing to evaluate the effect of sample geometry and constant shear strain rates in the picture-frame testKrogh, Christian / Dangora, Lisa M. / White, Kari D. / Jakobsen, Johnny / Sherwood, James A. et al. | 2019
-
Hot rolling effects on as-cast aluminum matrix nanocomposites reinforced by nano-sized ceramic powdersBehnamfard, S. / Mousavian, R. Taherzadeh / Khosroshahi, R. Azari / Brabazon, D. et al. | 2019
-
Numerical investigations on the cold welding of aluminum and steel using forward extrusionGörtan, Mehmet Okan / Yaldız, Akif et al. | 2019
-
Testing of magnetic pulse welded joints – Destructive and non-destructive methodsPsyk, Verena / Hofer, Christian / Faes, Koen / Scheffler, Christian / Scherleitner, Edgar et al. | 2019
-
Electrically assisted forming simulation solutions with FORGE®Alves, Jose / Acevedo, Sergio / Marie, Stephane / Rogeon, Philippe / Bay, Francois / Adams, Bernhard et al. | 2019
-
Analysis of extruded pins manufactured by friction stir forming for multi-material joining purposesConte, Romina / Filosa, Raffaele / Formoso, Vincenzo / Gagliardi, Francesco / Agostino, Raffaele G. / Ambrogio, Giuseppina et al. | 2019
-
Comparison of Johnson-Cook and modified Johnson-Cook material constitutive models and their influence on finite element modelling of Ti6Al4V orthogonal cutting processKugalur-Palanisamy, Nithyaraaj / Riviere-Lorphèvre, Edouard / Arrazola, Pedro-José / Ducobu, François et al. | 2019
-
Micromachining simulation using a crystal plasticity model: ALE and CEL approachesBoubakri, C. / Wolff, C. / Nouari, M. / Moufki, A. / Dubar, L. / Watremez, M. / Hubert, C. et al. | 2019
-
Suppression mechanism of diamond tool wear in ultrasonic vibration cuttingFukumori, Satoru / Itoigawa, Fumihiro / Maegawa, Satoru / Nakamura, Takashi / Shamoto, Eiji et al. | 2019
-
Advanced design of tooling for sheet-metal forming through numerical simulations in the scope of SRF crab cavities at CERNCarvalho, A. Amorim / Barrière, S. / Brachet, J. / Bulat, B. / Calaga, R. / Cano-Pleite, E. / Capatina, O. / Capelli, T. / Dallocchio, A. / Garlaschè, M. et al. | 2019
-
Thermo-mechanical study of PLA for FFF processSpina, Roberto / Cavalcante, Bruno et al. | 2019
-
Effect of the reuse of powder on material properties of Ti6Al4V processed by SLMMeier, Benjamin / Skalon, Mateusz / Warchomicka, Fernando / Belei, Carlos / Görtler, Michael / Kaindl, Reinhard / Sommitsch, Christof et al. | 2019
-
Rapid prototyping solution for the production of vulcanized rubber componentsVassallo, Matthew / Rochman, Arif et al. | 2019
-
Study on the potential rupture position of SUS304 stainless steel welded tubes under hydroforming conditionsWei, Jun / Yang, Lianfa / Guo, Jian / He, Yulin / Ma, Jianping et al. | 2019
-
Intrinsically lubricated tool inserts for deep drawing applications generated by selective laser meltingBader, Fabian / Hengsbach, Florian / Hoyer, Kay-Peter / Homberg, Werner / Schaper, Mirko et al. | 2019
-
Influence of the mechanical model of titanium T40 on the predicted forces during incremental forming processAbdelkefi, A. / Guines, D. / Léotoing, L. / Thuillier, S. et al. | 2019
-
3D numerical analyses of SPIF performed on tailored sheets to control their thinningSerratore, G. / Gagliardi, F. / Filice, L. / Bentrovato, R. / Ambrogio, G. et al. | 2019
-
Mechanical properties of sandwich composite panelsCiccarelli, Daniele / Forcellese, Archimede / Greco, Luciano / Panaccio, Lorenzo / Pieralisi, Massimiliano / Simoncini, Michela / Trevisan, Giulio et al. | 2019
-
Crystal plasticity modelling of flow behavior under various strain ratesLian, Junhe / Liu, Wenqi / Zhang, Wenwen / Shen, Fuhui / Münstermann, Sebastian et al. | 2019
-
Experimental investigation of reinforcement fabric cohesion in order to prevent the tow sliding defectSalem, M. M. / Labanieh, A. R. / De Luycker, E. / Fazzini, M. / Garnier, C. / Ouagne, P. et al. | 2019
-
Extrusion of the magnesium-nickel alloysTomovic-Petrovic, Stanka / Østhus, Rune / Jensrud, Ola et al. | 2019
-
Finite elements method modelling of void closure during multi directional hot forming of steelPondaven, C. / Langlois, L. / Chevalier, D. / Bigot, R. et al. | 2019
-
FEM simulation of strain gradients induced in metal sheets by special rolling techniquesPustovoytov, Denis / Pesin, Alexander et al. | 2019
-
Experimental and numerical investigation of the rolling process of HSLA steelMuszka, Krzysztof / Majta, Janusz / Kwiecień, Marcin / Lisiecka-Graca, Paulina / Bzowski, Krzysztof / Madej, Lukasz et al. | 2019
-
Investigation of the temperature influence of the static joining partner on the lower welding limit during magnetic pulse weldingSchumacher, E. / Prints, E. / Graß, M. / Böhm, S. et al. | 2019
-
Insertion behavior study of multi-material self-piercing rivet joints by means of finite element simulationVarela, Sonia / Mangas, Ángela / Kotercova, Zuzana / Briskham, Paul / Giménez, María / Muñoz, Carlos / Molina, Ricardo / Santos, Maite et al. | 2019
-
Joining by laser induced shock waves of aluminum and plasticsVeenaas, S. / Vollertsen, F. / Czotscher, T. et al. | 2019
-
Heat treatment of inconel selective laser melted parts: Microstructure evolutionHassanin, Andrea El / Scherillo, Fabio / Silvestri, Alessia Teresa / Caraviello, Antonio / Sansone, Raffaele / Astarita, Antonello / Squillace, Antonino et al. | 2019
-
The geometrical fine adjustment of circular honeycomb structure using laser weldingKeskitalo, Markku / Hietala, Mikko / Mäntyjärvi, Kari et al. | 2019
-
Performance simulation of different toolpaths in 2D1/2 pocket millingLeroy, Cédric / Rivière-Lorphèvre, Edouard / Ducobu, Francois / Lavernhe, Sylvain / Tournier, Christoph / Filippi, Enrico et al. | 2019
-
Estimation of cutting and friction coefficients in dry and cryogenic milling through experiments and simulationsElefanti, Alessandro / Albertelli, Paolo / Strano, Matteo / Monno, Michele et al. | 2019
-
Modelling the constitutive behaviour of poly(ether-ether-ketone) for forming processesTurner, Josh A. / Menary, Gary H. / Martin, Peter J. et al. | 2019
-
Modeling of IR lamps with coated reflector used in the slurry powder impregnation process of composite tapesMackie, Jennifer / De Almeida, Olivier / Schmidt, Fabrice / Labastie, Karine et al. | 2019
-
Experimental characterization of the thermal behavior of carbon/PEEK tapes in the laser-assisted AFP processLe Louët, Violaine / Le Corre, Steven / Boyard, Nicolas / Delaunay, Didier / Tardif, Xavier et al. | 2019
-
Stir casting and atmospheric pouring of A380 alloy with Sr additionHernández, Alfredo / Chávez, J. Federico et al. | 2019
-
Hole expansion forming analysis of mild steel sheet using a material model based on crystal plasticityHakoyama, Tomoyuki / Coppieters, Sam / Kuwabara, Toshihiko et al. | 2019
-
Studies on the influence of embossing on the mechanical properties of high-strength sheet metalWalzer, Stefan / Liewald, Mathias et al. | 2019
-
Evaluation of edge formability in high strength sheets through a fracture mechanics approachFrómeta, D. / Lara, A. / Parareda, S. / Casellas, D. et al. | 2019
-
Numerical-empirical-based function for the assessment of the stiffness distribution on automotive body panelsQuagliato, Luca / Park, Donghwi / Kim, Naksoo et al. | 2019
-
About localization on plane strain tensile test on bimaterial specimenPhung, H. A. / Balland, P. / Sène, N. A. / Tabourot, L. et al. | 2019
-
Prediction of stress-strain curves for aluminium alloys using symbolic regressionKabliman, Evgeniya / Kolody, Ana Helena / Kommenda, Michael / Kronberger, Gabriel et al. | 2019
-
Investigation on the influence of temperature, pressure and curing time on the mechanical properties of metal skins and CFRP core sandwich panels manufactured by means of curing-by-forming processKim, Yonghee / Jang, Changsoon / Kim, Naksoo / Quagliato, Luca et al. | 2019
-
The effect of creasing method and tooling on the geometry of formed creases in the creasing process of coated and uncoated paperboardLeminen, Ville / Tanninen, Panu / Matthews, Sami / Pesonen, Antti / Varis, Juha et al. | 2019
-
Over-3D printing of continuous carbon fibre composites on organo-sheet substratesMorales, U. / Esnaola, A. / Iragi, M. / Aretxabaleta, L. / Aurrekoetxea, J. et al. | 2019
-
Extrusion of magnesium alloy hollow profiles with axial variable wall thicknessNegendank, Maik / Sanabria, Vidal / Müller, Sören / Reimers, W. et al. | 2019
-
Roll gap per rotation optimization in a radial ring rolling processAllegri, Gabriele / Giorleo, Luca / Ceretti, Elisabetta et al. | 2019
-
Effect of heat treatment on the workability of hot isostatically pressed TNM-B1Stendal, Johan Andreas / Eisentraut, Mark / Sizova, Irina / Bolz, Sebastian / Bambach, Markus / Weiß, Sabine et al. | 2019
-
Material saving by a combination of rotary forging and conventional processes: Hybrid forging for net-shape gearVarela, Sonia / Valbuena, Oscar / Armentia, Jorge / Larrucea, Francisco / Manso, Virginia / Santos, Maite et al. | 2019
-
Temperature-controlled friction stir welding process of Al-Cu joints with complex geometriesGrabmann, Sophie / Zens, Amanda / Marstatt, Roland / Haider, Ferdinand / Zaeh, Michael F. et al. | 2019
-
Integrated design in welding and incremental forming: Mechanical behavior of friction stir welded blanksThuillier, S. / Andrade-Campos, A. / Carlone, P. / Valente, R. / de Sousa, R. J. Alves et al. | 2019
-
Tool wear and cutting forces when machining inconel 718 under cryogenic conditions: Liquid nitrogen and carbon dioxideChaabani, S. / Rodriguez, I. / Cuesta, M. / Ayed, Y. / Arrazola, P. J. / Germain, G. et al. | 2019
-
Experimental thermographic investigation for dry finish turning of SAF 2507 steelAngiuli, R. / Giannuzzi, M. / Papadia, G. et al. | 2019
-
Experimental analysis of high speed milling using a ceramic toolSergio, Rinaldi / Umbrello, Domenico / Rizzuti, Stefania / Mocchi, Barbara et al. | 2019
-
A method for producing burr-free shearing surfaces to increase part quality through two-stage counter-cuttingSenn, Sergei / Liewald, Mathias et al. | 2019
-
A study on tool wear for micromilling processColpani, Alessandro / Ceretti, Elisabetta / Attanasio, Aldo et al. | 2019
-
On the effect of boundary conditions for electromagnetism in induction heat treatment simulationsBadia, A. / Alves, J. / Bay, F. / Barlier, J. et al. | 2019
-
Parametric numerical solutions of additive manufacturing processesQuaranta, Giacomo / Haug, Eberhard / Duval, Jean Louis / Cueto, Elias / Chinesta, Francisco et al. | 2019
-
Preliminary analysis of grinding of PA66 thermoplasticsSpina, Roberto / Cavalcante, Bruno et al. | 2019
-
Comparison of non-dendritic A380 alloy modified by Sr addition, high cooling rate and pouring in angular channel with rheocastingHernández, Alfredo / Chávez, J. Federico et al. | 2019
-
Fundamental study on additive manufacturing of aluminum alloys by friction surfacing layer depositionShen, Junjun / Hanke, Stefanie / Roos, Arne / Santos, Jorge F. dos / Klusemann, Benjamin et al. | 2019
-
Investigation on the tribological behavior of tool-sided tailored surfaces for controlling the material flow in sheet-bulk metal formingHenneberg, J. / Lucas, H. / Denkena, B. / Merklein, M. et al. | 2019
-
Investigation of martensite-transformation and forming properties of additively reinforced 22MnB5 sheet metalsÜnsal, Ismail / Hirtler, Markus / Sviridov, Alexander / Bambach, Markus / Hama-Saleh, R. / Weisheit, A. / Schleifenbaum, J. H. / Kamaliev, Mike / Tekkaya, A. Erman et al. | 2019
-
Prediction of void growth using gradient enhanced polycrystal plasticityPerdahcıoğlu, E. S. / Aşık, E. E. / van den Boogaard, A. H. et al. | 2019
-
Investigation of weight saving potentials in complex steel forgings via extrusion and forging combination using finite element analysisGörtan, Mehmet Okan / Yazicioglu, Fisun / Ozsoy, Oguz et al. | 2019
-
The role of heat-treatments performed before and after a cold roll bonding process of galvanized steel sheetsHordych, Illia / Herbst, Sebastian / Nürnberger, Florian / Schmidt, Hans Christian / Orive, Alejandro Gonzalez / Homberg, Werner / Grundmeier, Guido / Maier, Hans Jürgen et al. | 2019
-
Which properties must a surface have to be suitable for cold pressure welding?Tran, The Hai / Gerlitzky, Christiane / Rohwerder, Michael / Groche, Peter et al. | 2019
-
Integrated modeling of injection pultrusionTucci, Fausto / Rubino, Felice / Esperto, Vitantonio / Carlone, Pierpaolo et al. | 2019
-
Non-liquid alternative coolants in robotic machiningEchaniz, Iñigo Aseguinolaza / Arrazola, Pedro Jose / Merrild, Christian Haastrup / Ørskov, Klaus Bonde et al. | 2019
-
Influence of cutting edge radius on tool life in milling inconel 718Celaya, A. / Pereira, O. / González, H. / Gómez-Escudero, G. / Fernández-Lucio, P. / Fernández-Valdivielso, A. / de Lacalle, L. N. López et al. | 2019
-
Comparison of springback value of the selected structure element for cold forming and hot forming methodsBałon, Paweł / Rejman, Edward / Kiełbasa, Bartłomiej / Smusz, Robert / Szostak, Janusz / Cieślik, Jacek et al. | 2019
-
Local material removal mechanisms of cemented carbides in abrasive flow machiningSalvatore, F. / Chabord, R. / Courbon, C. / Beaugiraud, B. / Hamdi, H. et al. | 2019
-
Interest of process monitoring and numerical simulation to improve metallic additive manufacturing processesChabot, Alexia / Hascoët, Jean-Yves / Rauch, Matthieu et al. | 2019
-
Formability of selective laser melted AlSi10MgJokelainen, Tero / Iso-Junno, Terho / Järvenpää, Antti / Mustakangas, Aappo / Keskitalo, Markku / Mäntyjärvi, Kari et al. | 2019
-
Creep behaviour of Ti-6Al-4V produced by SLMCardon, Amandine / Mareau, Charles / Ayed, Yessine / Van Der Veen, Sjoerd / Santo, Philippe Dal et al. | 2019
-
Experimental and numerical investigations of mechanical properties of 3D-printed polymeric samples with ideal and roughed surfacesPetrov, Mikhail A. / El-Deeb, Ibrahim S. A. et al. | 2019
-
Trials to evaluate bulging formability of duplex embossed A1050-O sheet using erichsen testLiu, Wuyang / Iizuka, Takashi et al. | 2019
-
A new correlation method to obtain the ultimate tensile strength with small punch test and its application to hot-stamping processesCalaf-Chica, Jose / Díez, Pedro Miguel Bravo / Calzada, Mónica Preciado / Ballorca-Juez, Daniel et al. | 2019
-
Numerical study on the effect of microstructure on the mechanical behaviour of dual-phase steelsMangas, Ángela / Eguía, Iñaki / Ezkerra, Jon / Mendiguren, Joseba / Arechabaleta, Zaloa et al. | 2019
-
Earing profile and wall thickness prediction of a cylindrical cup for dual-phase steels using different yield criteria in FE simulationAmaral, Rui L. / Santos, Abel D. / Miranda, Sara S. / de Sá, José César et al. | 2019
-
Evaluation of some non-edible vegetable oils as lubricants for conventional and non-conventional metal forming processesIdegwu, Chiedu U. / Olaleye, Samuel A. / Agboola, Joseph B. / Ajiboye, Joseph S. et al. | 2019
-
Modelling of the cone-type rotary piercing process and analysis of the seamless tube longitudinal shear strain using industrial dataMurillo-Marrodán, Alberto / García, Eduardo / Cortés, Fernando et al. | 2019
-
Speeding-up numerical simulation of 3D forging through recurrent boundary contact conditionsMarie, S. / Beraudo, C. / Fourment, L. et al. | 2019
-
Theoretical investigations on the fatigue behavior of a tailored forming steel-aluminium bearing componentCoors, Timm / Hwang, Jae-Il / Pape, Florian / Poll, Gerhard et al. | 2019
-
Modelling tailored forming joining zones with internal thickness extrapolation elementsTöller, Felix / Löhnert, Stefan / Wriggers, Peter et al. | 2019
-
Thermomechanical analysis of the friction stir welding processAndrade, D. G. / Leitão, C. / Dialami, N. / Chiumenti, M. / Rodrigues, D. M. et al. | 2019
-
Weld interface characteristics of copper in collision weldingNiessen, Benedikt / Groche, Peter et al. | 2019
-
A novel linear friction welding based approach for sheet-bulk joiningBaffari, Dario / Buffa, Gianluca / Campanella, Davide / Ingarao, Giuseppe / Valvo, Ernesto Lo / Fratini, Livan et al. | 2019
-
Waste stream characterisation for industrial symbiosis matchmaking: A case study for ferro metalsBracquené, Ellen / Duflou, Joost R. et al. | 2019
-
Development of an automatic procedure for machining distortions improvement on an aeronautic axisymmetric componentPrete, Antonio Del / Franchi, Rodolfo / Antermite, Fabrizio / Donatiello, Iolanda et al. | 2019
-
Comparing metamodeling techniques for variability analysis in sheet metal forming processesPrates, P. A. / Marques, A. E. / Oliveira, M. C. / Fernandes, J. V. et al. | 2019
-
Implicit material modelling using artificial intelligence techniquesGaspar, M. / Andrade-Campos, A. et al. | 2019
-
Constitutive modeling of the mechanics of polyethylene films in stretch wrapping processesKlein, Daniel / Stommel, Markus / Zimmer, Johannes et al. | 2019
-
Assessment of principal strain uncertainties in stereo-DIC due to uncontrollable change of initial boundary conditions during vacuum-assisted thermoformingAyadi, A. / Lacrampe, M.-F. / Krawczak, P. et al. | 2019
-
Exploitation of forming of the 3D printed materialsMäntyjärvi, Kari / Iso-Junno, Terho / Mustakangas, Aappo / Jokelainen, Tero / Keskitalo, Markku / Järvenpää, Antti et al. | 2019
-
Failure of DP and TRIP steel sheets in different deformation modesBarnwal, Vivek K. / Lee, Shinyeong / Barlat, Frédéric et al. | 2019
-
Strain path changes in aluminumVincze, G. / Butuc, M. C. / Barlat, F. / Lopes, A. B. / Silva, T. F. V. et al. | 2019
-
Microstructure and modelling of shear formingValdez, Karla Daniela Vazquez / Wynne, B. P. / Lee, Michael Kwan Ho et al. | 2019
-
Anisotropy influence on the mechanical and microstructural characteristics of AZ31B sheets deformed at room and elevated temperatureWang, Q. L. / Bertolini, R. / Ghiotti, A. / Bruschi, S. et al. | 2019
-
Measurement of three-dimensional shape of minute burr formed through punching process of circle holeIizuka, Takashi et al. | 2019
-
Effect of plastic strain and ductile damage on elastic modulus of multiphase steel and its impact on springback predictionMünstermann, Sebastian / Sparrer, Yannik / Yao, Yuan / Lian, Junhe / Meya, Rickmer / Clausmeyer, Till / Tekkaya, A. Erman et al. | 2019
-
Equivalent expression for Yld91 criterion for textured metalsCazacu, Oana et al. | 2019
-
Failure of AA6022-T4 sheets in hole-expansion after uniaxial prestrainHa, Jinjin / Dirian, Moritz / Dunn, Christopher / Korkolis, Yannis P. et al. | 2019
-
ATLAS of yield surfaces for strongly textured FCC polycrystalsDumoulin, Stéphane / Coudert, Térence / Hopperstad, Odd Sture et al. | 2019
-
Finite element modelling of material deformation and damage by tension under cyclic bending and compression testAi, Sheng / Long, Hui et al. | 2019
-
Virtual description of a biaxial 0°/90° non-crimp fabric with normally distributed filament directionsColin, David / Bel, Sylvain / Hans, Thorsten / Hartmann, Mathias et al. | 2019
-
Investigation of shear characterization of a UHMWPE unidirectional cross-ply for finite element simulation of composite processingWhite, Kari D. / Krogh, Christian / Sherwood, James A. et al. | 2019
-
Validation of a purely elastic model and a finite element model for a screw pressMull, Jean-François / Durand, Camille / Baudouin, Cyrille / Bigot, Régis / Borsenberger, Marc et al. | 2019
-
Joining zone shape optimisation for hybrid components made of aluminium-steel by geometrically adapted joining surfaces in the friction welding processBehrens, B.-A. / Chugreev, A. / Selinski, M. / Matthias, T. et al. | 2019
-
Deformation behavior of high-strength steel rivets for self-piercing riveting applicationsHönsch, Florian Dietmar / Domitner, Josef / Sommitsch, Christof et al. | 2019
-
Technologies for the mechanical joining of aluminum die castingsGrimm, Thomas / Jäckel, Mathias / Falk, Tobias / Drossel, Welf-Guntram et al. | 2019
-
Modelling of extrusion welding conditions for EN AW-7020 aluminium alloyLesniak, Dariusz / Gromek, Pawel / Madura, Jacek / Zaborowski, Krzysztof / Leszczynska-Madej, Beata et al. | 2019
-
Friction press joining of dissimilar materials: A novel concept to improve the joint strengthMeyer, Stefan P. / Wunderling, Christoph / Zaeh, Michael F. et al. | 2019
-
Influence of coolant flow on tool wear under jet cooling conditionsObikawa, Toshiyuki / Matsumoto, Wataru / Hayashi, Mamoru et al. | 2019
-
Development of a numerical model for the cryogenic machining simulation applied to a nickel superalloyPrete, Antonio Del / Franchi, Rodolfo / Begher, Alessia et al. | 2019
-
Effect of annealing on microhardness and phase composition of high-manganese austenitic steels with twinning-associated microstructures produced by high-pressure torsionMaier, Galina G. / Astafurova, Elena G. et al. | 2019
-
Experimental and numerical investigation of the cutting force during the angle shearing of several steelsGaldos, Lander / Ortubay, Rafael / Mendieta, Javier / Conde, Silvia / Silvestre, Elena et al. | 2019
-
Tailoring material scatter for metal forming processes based on inverse robust optimizationNejadseyfi, O. / Geijselaers, H. J. M. / van den Boogaard, A. H. et al. | 2019
-
Additive manufacturing with wire – Comparison of processesWęglowski, Marek St. / Błacha, Sylwester / Jachym, Robert / Dworak, Jerzy / Rykała, Janusz et al. | 2019
-
Chemical etching as a finishing process for electron beam melting (EBM) partsDolimont, Adrien / Demarbaix, Anthonin / Ducobu, François / Rivière-Lorphèvre, Edouard et al. | 2019
-
Comparison of the formability of austenitic reversion-treated and temper-rolled 17Cr-7Ni steelsJärvenpää, Antti / Jaskari, Matias / Keskitalo, Markku / Mäntyjärvi, Kari / Karjalainen, Pentti et al. | 2019
-
Anisotropic plasticity model considering the dynamic strain ageing effectsShen, Fuhui / Lian, Junhe / Münstermann, Sebastian / Kokotin, Valentin / Pretorius, Thomas et al. | 2019
-
Processing of new dual-phase (DP) and complex-phase (CP) steels for automotive applications by tailored hot forming routesPérez, Iñaki / Arribas, Maribel / Aranguren, Iñigo / Mangas, Ángela / Rana, Radhakanta / Lahaije, Chris / De Caro, Daniele et al. | 2019
-
The perspective of sensor integration and automated decision making in roll formingTraub, Tilman / Müller, Christian / Groche, Peter et al. | 2019
-
Preface: Proceedings of the 22nd International ESAFORM Conference on Material Forming (ESAFORM 2019)| 2019
-
Hysteresis behavior modelling of woven fabric under large strainDenis, Yvan / Hamila, Nahiene / Morestin, Fabrice et al. | 2019
-
Wrinkling and bending during forming of multi-layered textile compositeBoisse, P. / Guzman-Maldonado, E. / Wang, P. / Hamila, N. / Colmars, J. et al. | 2019
-
Interface shear strain of 1050/6061 laminated composite processed by asymmetric accumulative roll bondingPesin, Alexander / Pustovoytov, Denis et al. | 2019
-
Cross-wedge rolling of PTA-welded hybrid steel billets with rolling bearing steel and hard material coatingsKruse, Jens / Mildebrath, Maximilian / Behrens, Bernd-Arno / Stonis, Malte / Hassel, Thomas et al. | 2019
-
Investigation of the tool wear behaviour in shear-clinching processes during the running-in phaseWiesenmayer, Sebastian / Han, Daxin / Meschut, Gerson / Merklein, Marion et al. | 2019
-
Numerical investigation on the robustness of the roller clinching processVitzthum, Simon / Sturm, Philipp / Hiller, Maria / Volk, Wolfram et al. | 2019
-
Process optimization for flexible self-pierce riveting of multi-material structuresFalk, Tobias / Jäckel, Mathias et al. | 2019
-
Magnetic pulse welding of tubular partsBellmann, Joerg / Lueg-Althoff, Joern / Schulze, Sebastian / Hahn, Marlon / Gies, Soeren / Beyer, Eckhard / Tekkaya, A. Erman et al. | 2019
-
Mechanical testing of friction drilled and form tapped bolt joints for abrasion resistant steel applicationsHietala, Mikko / Keskitalo, Markku / Järvenpää, Antti / Mäntyjärvi, Kari et al. | 2019
-
1st Esaform mobility grant: Modeling of post machining distortions in thin walls applied to aluminum parts compared to experimental resultsRambaud, Pierrick / Perez, Ion / Mocellin, Katia / Madariaga, Aitor / Arrazola, Pedro José et al. | 2019
-
Influence of chip segmentation of Ti64 on the topography of the machined surfaceOrtiz-de-Zarate, G. / Sela, A. / Soriano, D. / Soler, D. / Aristimuño, P. / Arrazola, P. J. et al. | 2019
-
On the choice of basis in proper orthogonal decomposition-based surrogate modelsde Gooijer, Boukje / Hazrati, Javad / Geijselaers, Bert / van den Boogaard, Ton et al. | 2019
-
Comparison of design approaches to generate tools for a forming process with a six degree of freedom pressWonnenberg, Birk / Müller, Anke / Dröder, Klaus et al. | 2019
-
Surface modification for corrosion resistance of electric conductive metal surfaces with plasma electrolytic polishingReinhardt, Felix / Böttger-Hiller, Falko / Kranhold, Christian / Schulze, Hans-Peter / Kröning, Oliver / Zeidler, Henning / Lampke, Thomas et al. | 2019
-
Thermal behavior of a concentric annular polymer flowAllanic, N. / Deterre, R. / Mousseau, P. / Couedel, D. et al. | 2019
-
Thermal homogeneity in single screw channel polymer melt flowsBu, L. X. / Agbessi, Y. / Biglione, J. / Béreaux, Y. / Charmeau, J.-Y. et al. | 2019
-
Equipment for additive manufacturing of biocompatible siliconeColpani, Alessandro / Fiorentino, Antonio / Ceretti, Elisabetta et al. | 2019
-
Towards the definition an innovative supply chain: AMSA, an application of the cloud manufacturingCalabrese, M. / Primo, T. / Prete, A. Del / Filitti, G. et al. | 2019
-
The mechanics of the “eye”- Specimen bend test investigated by experiment and FE-analysisValberg, Henry / Langøy, Morten / Nedreberg, Mette / Helvig, Torgeir et al. | 2019
-
Study on the wrinkling behavior of cylindrical deep-drawn cupsBéres, Gábor / Lukács, Zsolt / Tisza, Miklós et al. | 2019
-
Numerical/experimental investigation of the production of thin magnesium alloy components via superplastic formingGuglielmi, P. / Sorgente, D. / Palumbo, G. et al. | 2019
-
Digitizing roll forming with smart sensorsSedlmaier, A. / Dietl, T. / Harraßer, J. et al. | 2019
-
Process planning for precision incremental forming of complex partsShin, Jaekwang / Bansal, Ankush / Chang, Randy / Taub, Alan / Banu, Mihaela et al. | 2019
-
Constitutive model and draping simulations of self-reinforced polypropylene compositesSelezneva, Marina / Naouar, Naim / Gorbatikh, Larissa / Hine, Peter / Lomov, Stepan V. / Swolfs, Yentl / Verpoest, Ignaas / Boisse, Philippe et al. | 2019
-
Effect of press force in tensile strength and surface quality of press formed wood plastic composite productsMatthews, Sami / Toghyani, Amir / Tanninen, Panu / Hyvärinen, Marko / Leminen, Ville / Kärki, Timo / Varis, Juha et al. | 2019
-
Backward rod extrusion of bimetallic aluminum-copper alloys at room temperatureSanabria, V. / Gall, S. / Gensch, F. / Nitschke, R. / Mueller, S. et al. | 2019
-
Forming analysis of tailored tubes with an internal contoured wall thickness and external axial ribs manufactured by internal flow-turningWiens, Eugen / Homberg, Werner et al. | 2019
-
Conditions for development of regular structure by deformation of metal materialsPerlovich, Yu. A. / Isaenkova, M. G. / Krymskaya, O. A. / Dobrokhotov, P. L. et al. | 2019
-
Uniaxial compression of 42CrMo4 on different testing devices: Influence on identification of material parameters for plasticity modelsVenet, G. / Pondaven, C. / Baudouin, C. / Langlois, L. / Balan, T. et al. | 2019
-
Gradient structure of microalloyed steel produces superior mechanical behavior under dynamic loadingMajta, Janusz / Bloniarz, Remigiusz / Kwiecien, Marcin et al. | 2019
-
Application of irregular roller burnishing in the shaft straightening process - Experimental and numerical studyKowalik, Marek / Trzepiecinski, Tomasz et al. | 2019
-
Mechanical joining without auxiliary element by cold formed pins for multi-material-systemsKraus, Martin / Frey, Philipp / Kleffel, Tobias / Drummer, Dietmar / Merklein, Marion et al. | 2019
-
Application of a locking-free element in modeling of joining by clinchingKhaledi, Kavan / Poggenpohl, Lukas / Reese, Stefanie et al. | 2019
-
Polygon machining in whirling mechanismSerizawa, Masaki / Ueno, Yuta / Matsumura, Takashi et al. | 2019
-
Towards inverse simulation: Effect of material parameters on machining predictionsSela, A. / Ortiz-de-Zarate, G. / Soriano, D. / Cuesta, M. / Arrieta, I. / Arrazola, P. J. et al. | 2019
-
Connection between shock wave induced indentations and hardness by means of neural networksCzotscher, T. / Baguer, D. Otero / Vollertsen, F. / Piotrowska-Kurczewski, I. / Maaß, P. et al. | 2019
-
Flexible die as reinforcement for aluminum foam samplesViscusi, A. / Carrino, L. / De Fazio, D. / Durante, M. / Formisano, A. et al. | 2019
-
Preliminary study of curing kinetics and mechanical characterization of reactive thermoplastic resins with new calorimetric cell mounted on DMACara, Fabien / Taillet, Brice / Gérard, Pierre et al. | 2019
-
Fluidised bed machining of metal additive manufactured partsHassanin, A. El / Troiano, M. / Silvestri, A. T. / Contaldi, V. / Scherillo, F. / Solimene, R. / Scala, F. / Squillace, A. / Salatino, P. et al. | 2019
-
The cross-compression-tension-bar experiment for the investigation of ductile fracture behavior near pure shear conditionsKomischke, Tim / Hora, Pavel et al. | 2019
-
Effect of the unbending process on mechanical properties before and after flattening of extruded open tubes of magnesium alloy ME20Dardaei Joghan, Hamed / Izadyar, Seyed Ahmad / Hahn, Marlon / Tekkaya, A. Erman et al. | 2019
-
Formability limit prediction of TRIP780 steel sheet using lode angle dependent gurson-based models with Thomason coalescence criterion and bifurcation analysisNasir, Muhammad Waqar / Chalal, Hocine / Abed-Meraim, Farid et al. | 2019
-
Fatigue behaviour and lifetime prediction of cold-formed high strength steelGothivarekar, Sanjay / Peña, Carlos Jiménez / Coppieters, Sam / Talemi, Reza / Debruyne, Dimitri et al. | 2019
-
A modified Swift law for high strength steelsAerens, Richard / Vorkov, Vitalii / Duflou, Joost R. et al. | 2019
-
Lightweighting potential of an automotive roof reinforcement using aluminum alloys in place of high strength steelsIbarretxe, U. / Galdos, L. / Otegi, N. / Ortubay, R. / Argarate, U. / Aranburu, A. et al. | 2019
-
Three-dimensional printing of continuous carbon fiber-reinforced shape memory polymer compositesAn, Yongsan / Yu, Woon-Ryeol et al. | 2019
-
Modeling of friction behaviour during in temperature compression tests on aluminium alloysBruni, Carlo / Ciccarelli, Daniele et al. | 2019
-
Experimental investigation of pinching phenomena in cold rolling of thin steel sheetsCometa, A. / Geijselaers, H. J. M. / van den Boogaard, A. H. / Wentink, D. J. / Hol, C. W. J. / Jacobs, L. J. M. / Kampmeijer, L. et al. | 2019
-
Experimental and numerical study of dissimilar sheet metal clinchingJónás, Szabolcs / Tisza, Miklós / Felhős, Dávid / Kovács, Péter Zoltán et al. | 2019
-
Sustainable progressive-stamping of brass American snaps by using the low-temperature plasma nitrided diesAizawa, Tatsuhiko / Morita, Hiroshi / Kurozumi, Shu-Ichi et al. | 2019
-
Single point incremental forming of cold-rolled polycarbonate sheetsDurante, M. / Formisano, A. / Boccarusso, L. / Astarita, A. / Langella, A. et al. | 2019
-
Development of laser straightening (LS) strategies to remove distortion in welded aeronautical structuresÁlvarez, Pedro / Escribano, Rubén / Zubiri, Fidel / Fomin, Fedor / Kashaev, Nikolai / Bauer, Stefan et al. | 2019
-
Importance of the contact interface definition in the numerical simulation of tool wear in metal cuttingGiovenco, A. / Courbon, C. / Cabanettes, F. / Rech, J. / Masciantonio, U. / Karaouni, H. / D’Eramo, E. / Van Robaeys, A. / Jourden, E. et al. | 2019
-
Data-driven correction of models for deformable solidsGonzález, D. / Chinesta, F. / Cueto, E. et al. | 2019
-
Analysis of EDM drilling of porous SiC/Al-Mg compositeCoteață, Margareta / Slătineanu, Laurentiu / Beșliu Băncescu, Irina / Hrițuc, Adelina et al. | 2019
-
Numerical investigations on the influence of material properties on bending behavior of comb shaped stator bodiesWüterich, David / Liewald, Mathias / Kopp, Michael et al. | 2019
-
Development of a flow curve based material model of aluminium alloys in the semi-solid stateSpeth, Marco / Liewald, Mathias / Seyboldt, Christoph / Riedmueller, Kim Rouven et al. | 2019
-
Towards the damage evolution for hot forming processes using Gurson-Tvergaard Needleman model – Coupled to dynamic recrystallizationImran, Muhammad / Szyndler, Joanna / Afzal, Muhammad Junaid / Bambach, Markus et al. | 2019
-
The role of viscoelasticity in the mechanical modelling of rubbersAndrade, C. M. / Barros, J. R. / Neto, D. M. / Ramalho, A. / Oliveira, M. C. / Menezes, L. F. / Alves, J. L. et al. | 2019
-
Thermo-viscoplastic behavior of AA6061 under dynamic biaxial loadingsLiang, J. / Guines, D. / Léotoing, L. et al. | 2019
-
Experimental analysis of process induced draping effects in textile preformsKunze, Eckart / Böhm, Robert / Geller, Sirko / Gude, Maik et al. | 2019
-
Experimental and numerical analysis of springback and bending behavior of a composite sandwich metal-polymer materialMiranda, Sara S. / Santos, Abel D. / Amaral, Rui L. / Malheiro, Luis T. et al. | 2019
-
The hot spot in Al-rod extrusion investigated by FEM-analysisValberg, Henry S. / Lefstad, Martin / Costa, André L. M. et al. | 2019
-
DIGIMU®: Full field recrystallization simulations for optimization of multi-pass processesDe Micheli, P. O. / Maire, L. / Cardinaux, D. / Moussa, C. / Bozzolo, N. / Bernacki, M. et al. | 2019
-
Analysis of mapped temperature data on geometry points to characterize the influence of temperature deviations on cross-wedge rollingQuentin, Lorenz / Kruse, Jens / Beermann, Rüdiger / Reinke, Carl / Langner, Jan / Stonis, Malte / Kästner, Markus / Reithmeier, Eduard et al. | 2019
-
Strain path change influence on residual stress after deep drawingHerault, D. / Thuillier, S. / Manach, P. Y. et al. | 2019
-
Permeability characterization of braided fabrics made of hemp fibersRubino, Felice / Corbin, Anne-Clémence / Ferreira, Manuela / Labbanieh, Ahmad Rashed / Sanguigno, Luigi / Soulat, Damien / Maligno, Angelo et al. | 2019
-
Towards parametric RTM processes: The interpolative mappingGhnatios, Chady / Montes, Nicolas / Tertrais, Hermine / Duval, Jean Louis / Abisset-Chavanne, Emmanuelle / Falco, Antonio / Chinesta, Francisco et al. | 2019
-
Residual effects of ultrasonic-assisted compression testing on pure copperJäckisch, Manuel / Michalski, Markus / Merklein, Marion et al. | 2019
-
The optimization of the spark erosive removal process – Dependencies and benefitsSchulze, Hans-Peter / Kröning, Oliver et al. | 2019
-
Resin microwave preheating in liquid composite molding processEsperto, Vitantonio / Durante, Massimo / Carlone, Pierpaolo / Carrino, Luigi et al. | 2019
-
Embossing of the paperboard and the effect of polymer coating on local deformationTanninen, Panu / Leminen, Ville / Matthews, Sami / Pesonen, Antti / Varis, Juha et al. | 2019
-
Semisolid forging of steels: Readiness from an industrial point of viewPlata, Gorka / Lozares, Jokin / Hurtado, Iñaki / Azpilgain, Zigor et al. | 2019
-
Model reduction method for the simulation of the selective laser melting processAgouzoul, Asmaâ / Poulhaon, Fabien / Joyot, Pierre et al. | 2019
-
Shear bands formation in different engineering materials subjected to dynamic compressionMancini, Edoardo / Farotti, Emanuele / Paoletti, Chiara / Sasso, Marco et al. | 2019
-
Experimental and numerical investigation of the contact behavior during FE forming simulation of continuously reinforced composites in wet compression moldingPoppe, Christian / Dörr, Dominik / Kraus, Fabian / Kärger, Luise et al. | 2019
-
Modeling of tricot stitch non crimp fabric in forming simulationsSteer, Q. / Colmars, J. / Boisse, P. et al. | 2019
-
On the relevance of thermomechanics and crystallization kinetics for FE thermoforming simulation of semi-crystalline thermoplastic tapesDörr, Dominik / Kugele, Daniel / Joppich, Tobias / Henning, Frank / Kärger, Luise et al. | 2019
-
Numerical modeling of a hybrid forming process for three-dimensionally curved fiber-metal laminatesWerner, Henrik O. / Dörr, Dominik / Henning, Frank / Kärger, Luise et al. | 2019
-
Development of innovative combustion chamber components for large marine enginesLehnert, Tim / Sterzing, Andreas / Mauermann, Reinhard / Schubert, Nadine / Krüger, Lutz / Keßler, Andreas / Wolf, Gotthard / Wagler, Hans et al. | 2019
-
Investigation into the bond strength of the joining zone of compound forged hybrid aluminium-steel bearing bushingBehrens, Bernd-Arno / Sokolinskaja, Valeria / Chugreeva, Anna / Diefenbach, Julian / Thürer, Susanne / Bohr, Dieter et al. | 2019
-
Geometric and corrosive influences on load-bearing capacity of multi-element shear-clinching specimenHan, Daxin / Wiesenmayer, Sebastian / Merklein, Marion / Meschut, Gerson et al. | 2019
-
A process of forming austenitic steel using a rubber membrane and oilBałon, Paweł / Rejman, Edward / Kiełbasa, Bartłomiej / Smusz, Robert / Szostak, Janusz / Cieślik, Jacek et al. | 2019
-
Localized heat assisted incremental forming of polycarbonate sheets by tool rotationFormisano, A. / Durante, M. / Langella, A. / Minutolo, F. Memola Capece et al. | 2019
-
Production of GFRP air pipes using lightweight gypsum patterns removable in a recyclable wayBoccarusso, L. / Candida, G. / Durante, M. / Iucolano, F. / Langella, A. / Minutolo, F. Memola Capece / Mocerino, D. / Pagnano, M. et al. | 2019
-
Effects of machining conditions on the accuracy of electro-discharge milling in carbon-based dielectricŻyra, Agnieszka / Skoczypiec, Sebastian et al. | 2019
-
Investigation of shape deviations of expanded and slitted tube endsLanghammer, Kay Lorenz / Engel, Bernd et al. | 2019
-
Additive tooling for thermoforming a cowling of an UAV using binder jettingJunk, Stefan / Schrock, Steffen / Schröder, Werner et al. | 2019
-
Numerical and experimental analysis of the thermal profile of printed layers during selective laser sintering process of poly(etheretherketone)Korycki, Adrian / Garnier, Christian / Rodier, Nathan / Chabert, France / Laurent, Elisabeth / Nassiet, Valérie et al. | 2019
-
Wire-arc additive manufacturing of pre-forms for forging of a Ti–6Al–4V turbine bladeSizova, Irina / Hirtler, Markus / Günther, Martin / Bambach, Markus et al. | 2019
-
Numerical study of rolling process on the plastic strain distribution in wire + arc additive manufactured Ti-6Al-4VAbbaszadeh, M. / Hönnige, J. / Martina, F. / Kashaev, N. / Williams, S. W. / Klusemann, B. et al. | 2019
-
Testing the accuracy of in-process springback measurements in tube draw bendingMagro, T. / Simonetto, E. / Ghiotti, A. / Savio, E. / Bruschi, S. et al. | 2019
-
Improved set up strategies for steel strip straightening machinesRostek, Tim / Homberg, Werner et al. | 2019
-
Study of high purity nickel with various grain sizes using shear testsYuan, Sibo / Habraken, Anne-Marie / Milis, Olivier / Duchêne, Laurent et al. | 2019