CURRENT ADVANCES IN MATERIALS AND PROCESSES
The tables of contents are generated automatically and are based on the data records of the individual contributions available in the index of the TIB portal. The display of the Tables of Contents may therefore be incomplete.
Table of contents
- 024
-
Thermodynamics of molten Fe-Cr-C~s~a~t~d alloyKobayashi, Y. et al. | 1995
- 792
-
Calculation of the activities of steelmaking slags by thermodynamic models and its application to the analysis of steelmaking processYamada, W. et al. | 1995
- 794
-
Improvement of reaction efficiency in hot metal desulfurizationOgawa, K. et al. | 1995
- 798
-
Technologies for producing ultra carbon and nitrogen steel in RH degasserMatsuno, H. et al. | 1995
- 802
-
Promotion of deoxidation rate in molten steelBessho, N. et al. | 1995
- 804
-
Limited rate of degassing from molten ironMorita, K. et al. | 1995
- 806
-
Estimation of mass-transfer rate in liquid iron in reactorsTaiguchi, S. et al. | 1995
- 808
-
Optimization of iron and steel process by the use of computational fluid dynamicsTakatani, K. et al. | 1995
- 810
-
Factors determining the maximum production rate in the smelting furnaceKatayama, H. et al. | 1995
- 812
-
Effect of impurity elements on the properties of high purity iron and iron-base alloysTanino, M. et al. | 1995
- 814
-
Prediction of refining limits of impurities in bulky steelSasabe, M. et al. | 1995
- 816
-
I Development of the automatic analysis system for heat analysis at the steel-making plant of Nagoya WorksOhno, Y. et al. | 1995
- 820
-
Existing state of on-site analysis and future subjects in steel making processesIshibashi, Y. et al. | 1995
- 824
-
Sensors for iron and steelmaking-an overviewIwase, M. et al. | 1995
- 826
-
Progress in on-line analysis for molten ironChiba, K. et al. | 1995
- 829
-
A view on the role of routine analysis for controlling steelmaking operationsEmi, T. et al. | 1995
- 831
-
Expectation of analysis technology from steelmaking fieldKitamura, S. et al. | 1995
- 834
-
On-line analysis in surface treating processYamamoto, A. et al. | 1995
- 838
-
Present status and subject of surface analysis of iron and steelGennai, N. et al. | 1995
- 894
-
Behaviour of slag foaming in smelting reductionLan, H. et al. | 1995
- 895
-
Pilot plant test of smelting reduction for steelmaking dust (Development of the smelting reduction process for steelmaking dust-1)Hara, Y. et al. | 1995
- 896
-
Scaling of smelting reduction for steelmaking dust (Development of the smelting reduction process for steelmaking dust-2)Hara, Y. et al. | 1995
- 897
-
Construction and operation of steel making dust recycling plant (Development of the smelting reduction process for steel making dust-3)Hasegawa, S. et al. | 1995
- 898
-
Facilities and operational results of the DIOS pilot plant-3Kawakami, M. et al. | 1995
- 899
-
Influence of coal diameter on gasification of carbonatious carry over particle in SRFWakamatsu, S. et al. | 1995
- 900
-
Hot metal carbon in smelting reduction furnaceUemura, K. et al. | 1995
- 901
-
Heat transfer analysis of gas cooled refractory in smelting reduction furnaceIshikawa, M. et al. | 1995
- 902
-
Operational result of tapping in DIOS-PPTamura, T. et al. | 1995
- 903
-
The reduction model of iron ore in multiple fluidized bed (The reduction, degradation and separation model of fluidized bed-1)Hiraoka, H. et al. | 1995
- 904
-
The reduction, degradation and separation model of iron ore in fluidized bed (The reduction, degradation and separation model of fluidized bed-2)Hiraoka, H. et al. | 1995
- 905
-
Improvement of charging equipments at Nagoya Nos. 1, 2 sintering plantsSuzuki, H. et al. | 1995
- 906
-
High yield operation under high productivity at Fukuyama No.4 sinter plantSuzuki, M. et al. | 1995
- 907
-
Improvement of total sinter yield in Keihin WorksWatanabe, Y. et al. | 1995
- 908
-
The low-cost and high productive sintering operation at Kimitsu No.2Akagi, K. et al. | 1995
- 909
-
Introduction of the flux injection into sintercake at Tobata No.3 sinter machine (Development of yield improvement at upper layer-3)Ikenaga, J. et al. | 1995
- 910
-
Influence of limestone size distribution on iron ore sinteringSuh, I.-K. et al. | 1995
- 911
-
Effect of moisture concentration control in sinter mixture on sintering operationMatsumura, M. et al. | 1995
- 912
-
Influence of nucleus particle of limonitic ore on sinter structureHoshi, M. et al. | 1995
- 913
-
The result of non-breeze sintering operation by use of millscaleTakihira, K. et al. | 1995
- 914
-
In-bed state diagnosis and its control based on on-line sensing data for uniform sintering in transversal directionLee, S.-H. et al. | 1995
- 915
-
Influence of vertical slit in lower layer of sintering bed on permeabilityKonishi, Y. et al. | 1995
- 916
-
Effect of coal moisture content on coking behaviorLee, S.-Y. et al. | 1995
- 917
-
Evaluation of pitch on coke product materialTakeo, S. et al. | 1995
- 918
-
Fluidity prediction model of blended coal based on viscous behavior of suspensionMatsui, T. et al. | 1995
- 919
-
Coal tar rapid pyrolysis in a moving bed reactorChikata, T. et al. | 1995
- 920
-
Control of coking pressure by coal blending (Studies on coking pressure-7)Arima, T. et al. | 1995
- 921
-
On the effect of internal pressure during carbonization on coke strengthAmamoto, K. et al. | 1995
- 922
-
Reological and swelling properties of TCM (tar coal mixture) (Development of coal modification process with refined tar and high caloric gas production-1)Ueno, I. et al. | 1995
- 923
-
Characteristics of emission of pyrolysis gas from tar-coal mixture (Development of coal modification process with refined tar and high caloric gas production-2)Konishi, T. et al. | 1995
- 924
-
Characteristics of emission of tar from tar-coal mixture (Development of coal modification process with refined tar and high calorie gas production-3)Konishi, T. et al. | 1995
- 925
-
Coke detorioration by shearing stressFukada, K. et al. | 1995
- 926
-
Expansion of range for coal blend in advanced form coke process (Improvement of formed coke process-4)Sasaki, M. et al. | 1995
- 927
-
Mass balance of continuous selective oxidation furnaceFukuzawa, A. et al. | 1995
- 928
-
Kinetics of reactions between MnO based slag and Fe-C-P-Si-Mn-S alloyShibata, E. et al. | 1995
- 929
-
Development of Mg desulphurization system with spinning lanceMikuni, M. et al. | 1995
- 930
-
Improvement of CaO based flux for hot metal desulfurizationFujita, T. et al. | 1995
- 931
-
Development of the optimum slag for dephosphorization and desulfurization at LD type hot-metal pretreatment processMatsumoto, K. et al. | 1995
- 932
-
Optimization of torpedo car profile (Enlargement of torpedo car at Mizushima Works-1)Arimura, A. et al. | 1995
- 933
-
Development of the most suitable torpedo design (Enlargement of torpedo car at Mizushima Works-2)Imajoh, M. et al. | 1995
- 934
-
Desiliconization operation by direct blasting of reagent into torpedocarJinno, T. et al. | 1995
- 935
-
Pure water cooling of food and duct for exhaust gas at pre-treatment centerKobayashi, K. et al. | 1995
- 936
-
Slopping restraint in hot metal pretreatmentTomita, K. et al. | 1995
- 937
-
Technology of diagnosis and repair steelmaking refractories at Oita WorksAsou, S. et al. | 1995
- 938
-
Application of monolithitic refractory to VOD ladleSakaki, S. et al. | 1995
- 939
-
Application of castable refractories for BF ladleKato, H. et al. | 1995
- 940
-
Application of low heat capacity alumina-spinel castable for ladleHino, T. et al. | 1995
- 941
-
Improvement of splash cover refractory life by water-cooling on torpedo oxidization process (TOP)Sakaguchi, N. et al. | 1995
- 942
-
Construction and operation of ladle and tundish maintenance center, Chiba WorksNakazawa, T. et al. | 1995
- 943
-
Slag penetration into alumina-magnesia castable refractoriesOshima, A. et al. | 1995
- 944
-
Change of temperature and thermal stress generated in MgO-C bricks under operating temperature of BOFUchida, S. et al. | 1995
- 945
-
Effect of AlB~2 addition on the oxidation resistance of MgO-C refractorySunayama, H. et al. | 1995
- 946
-
Corrosion resistance of Al~2O~3-SiC-C refractoryOnomoto, T. et al. | 1995
- 947
-
Improvement of internal quality for high carbon steel grades by soft reduction in continuously cast bloomsJoong, K. P. et al. | 1995
- 948
-
Experiment on the reduction of round billet with liquid coreYamanaka, A. et al. | 1995
- 949
-
Reduction efficiency of continuously cast strand with liquid coreTanizawa, Y. et al. | 1995
- 950
-
Analysis of internal crack formation by in-line reduction in continuous castingMochida, T. et al. | 1995
- 951
-
Quality improvement of coil surface for rimmed steelSugiyama, S. et al. | 1995
- 952
-
Steel flow control in mold for surface improvement of ultra low carbon steel (Quality improvement of ultra low carbon steel-6)Nishimachi, R. et al. | 1995
- 953
-
Development of secondary cooling spray of continuous casting machine at Chiba WorksTadama, T. et al. | 1995
- 954
-
Experimental study of droplet deformation on a hot metal surfaceFujimoto, H. et al. | 1995
- 955
-
Effect of thermal history on the recovery of embrittlement of low carbon steels at elevated temperaturesYu, C. et al. | 1995
- 956
-
Consideration about coke degradation mechanism and suppression measures during high-rate pulverized coal injectionYamaguchi, K. et al. | 1995
- 957
-
Effect of coke quality on coke degradation in raceway at high rate of pulverized coal injectionKasai, A. et al. | 1995
- 958
-
Coke disintegration behavior in front of a tuyere at high rate injection of pulverized coal (Operation technology with high coal rate injection-4)Murai, R. et al. | 1995
- 959
-
Packed condition of lower part of blast furnace under high coal injection rate operation (Operation technology with high coal rate injection-5)Murai, R. et al. | 1995
- 960
-
Change of phenomena in the blast furnace at high pulverized coal rate (Operation technology with high coal rate injection-6)Mori, K. et al. | 1995
- 961
-
Development of the injection lance for pulverized coal and waterOhkouchi, I. et al. | 1995
- 962
-
Combustion and consumption behavior of coarse size pulverized coal in blast furnaceDeno, T. et al. | 1995
- 963
-
The effective factors on the combustion of single coal char particles computed by an unsteady-state modelQu, M. et al. | 1995
- 964
-
An unsteady-state combustion model of single coal particle heated by laserQu, M. et al. | 1995
- 965
-
Development of high efficiency oven-door in Yawata No.4 coke ovenIkemoto, S. et al. | 1995
- 966
-
Development of expert system at byproduct plant (Systemization of Fukuyama byproduct plant-1)Ogawa, M. et al. | 1995
- 967
-
Automatic operation of Fukuyama byproduct plant (Systematization of Fukuyama byproduct plant-2)Hirano, S. et al. | 1995
- 968
-
Development of the combustion control in NSC-S type coke ovenNoguchi, T. et al. | 1995
- 969
-
Development of optimizing model for steam recovery in CDQIshiguro, H. et al. | 1995
- 970
-
Property change in damaged bricks of CDQ dust catcher during operationDoko, Y. et al. | 1995
- 971
-
Development of special glaze for glass-coating on coke oven wallsAndou, T. et al. | 1995
- 972
-
Development of width measuring apparatus for coke oven chamberMiyake, T. et al. | 1995
- 973
-
Visible modification of the hot repair machine for central region coke ovenMasamori, K. et al. | 1995
- 974
-
Development of the high capacity flame gunning burnerShimizu, S. et al. | 1995
- 975
-
Development of steel analysis system of No.4 steelmaking plant at Chiba WorksTakizawa, Y. et al. | 1995
- 976
-
Trace determination of nitrogen in steel by flow injection waveguide capillary cell spectrophotometryAimoto, M. et al. | 1995
- 977
-
Determination of diffusible hydrogen in steel by atmospheric pressure ionization mass spectrometerSugimoto, K. et al. | 1995
- 978
-
Cooperative test of determination of low carbon in steel by optical emission spectrometryKondo, H. et al. | 1995
- 979
-
Determination of selenium in steel by cathodic stripping voltammetry with a silver disk electrodeIshiyama, T. et al. | 1995
- 980
-
Concentration measurement of pickling acid by ion electrodeOhta, T. et al. | 1995
- 981
-
Metal ion removal in electrolyte by magnetizationOta, T. et al. | 1995
- 982
-
Rapid and high accuracy analysis of steel by electrolytic dissolution-inductively coupled plasma atomic emission spectrometryUemura, T. et al. | 1995
- 983
-
Application of laser ablation/ICP to estimating the cause of steel surface defectsMochizuki, T. et al. | 1995
- 984
-
Analysis of steel at high temperature by laser ablation ICP-AES (Application of laser ablation ICP-AES to steel analysis-2)Akiyoshi, T. et al. | 1995
- 985
-
Influence of sample shape (Analysis of Fe/Ni based alloys glow discharge mass spectrometry-1)Okamoto, N. et al. | 1995
- 986
-
Determination of relative sensitivity factor (Analysis of Fe/Ni based alloys by glow discharge mass spectrometry-2)Okamoto, N. et al. | 1995
- 987
-
Isolation and determination of the dross precipitated in 55%Al-Zn bathFujimoto, K. et al. | 1995
- 988
-
Separation analysis of oxides by a pyrolysis technique (Rapid separation analysis of oxides-1)Kurakake, Y. et al. | 1995
- 989
-
Determination method of oxygen as easily reduced oxides in converter slag of stainless steel (Rapid separation analysis of oxides-2)Komatsu, A. et al. | 1995
- 990
-
Estimation accuracy of a slime-size nonmetallic inclusion quantity by statistics of extreme values of microscopyKusano, Y. et al. | 1995
- 991
-
Fading characteristics of imaging plates for transmission electron microscopesTaniyama, A. et al. | 1995
- 992
-
Structure analysis of 55Al-Zn coated steel sheetMaeda, C. et al. | 1995
- 993
-
Development of X-ray diffractometer for high temperature analysisFujimura, T. et al. | 1995
- 994
-
SIMS analysis of oxide films formed on Fe-20Cr-5Al alloysUsui, Y. et al. | 1995
- 995
-
Determination of calcium in solution in steel by secondary ion mass spectrometryToyoda, T. et al. | 1995
- 996
-
Surface texture observation of lubricant coated steel sheet by using lateral force microscopeYamasaki, M. et al. | 1995
- 997
-
Monitoring of solidification by phase modulated interference fringesKobayashi, S. et al. | 1995
- 998
-
The development of the RH treatment using a prevacuum equipmentTomita, H. et al. | 1995
- 999
-
Construction and operation of No.3RHKimura, T. et al. | 1995
- 1000
-
Vacuum oxygen decarburization from molten ironKuranaga, T. et al. | 1995
- 1001
-
Investigation and experiment on atomization of molten steel under reduced pressure (Development of stream droplet degassing-1)Ebihara, A. et al. | 1995
- 1002
-
Acceleration of degassing by atomization of molten steel under reduced pressure (Development of stream droplet degassing-2)Ebihara, A. et al. | 1995
- 1003
-
Application of C/S analyzer at LFInoue, T. et al. | 1995
- 1004
-
Slag metal reaction model under the emulsification state in the strong stirring induction furnaceInomoto, T. et al. | 1995
- 1005
-
Rationalization of slabbing millKodera, T. et al. | 1995
- 1006
-
Improvement of C.C. roll life by adoption of welded SUS630Yamamura, T. et al. | 1995
- 1007
-
Integration of tundish repair yard at Keihin WorksNomura, K. et al. | 1995
- 1008
-
Effect of molten continuous casting powder on heat flux in mold (Development of mold powder for high speed continuous casting-2)Watanabe, K. et al. | 1995
- 1009
-
Influence of mold powder on initial solidification of SUS304 steel (Development of skipping surface grinding process of SUS304 slab-2)Fukuda, Y. et al. | 1995
- 1010
-
Relation between temperature of thermo-couple at the mould and property of mold powderKobayashi, K. et al. | 1995
- 1011
-
Mathematical modelling of the change in composition of mold flux in continuous casting of steelKiyose, A. et al. | 1995
- 1012
-
Exothermic reaction in mold powder for continuous castingNishida, N. et al. | 1995
- 1013
-
Physical properties of mold powder for various mold sections and steel gradesTsukaguchi, Y. et al. | 1995
- 1014
-
Viscosity measurements of powders for high-speed continuous casting and an equation for estimating their viscositySakai, H. et al. | 1995
- 1015
-
Crystallization behavior of high speed powder on the middle carbon steelSakai, H. et al. | 1995
- 1016
-
Formation of low melting point phase on ZrO~2-CaO-C submerged nozzleUchimura, M. et al. | 1995
- 1017
-
Alumina buildup mechanism on inner wall of submerged entry nozzle in continuous castingMorishita, M. et al. | 1995
- 1018
-
Numerical analysis of inclusion behavior in the submerged nozzleSawada, I. et al. | 1995
- 1019
-
Increase of equiaxed crystals by nucleation in submerged nozzleMori, H. et al. | 1995
- 1020
-
Thermodynamics of Ni-Ca-O ad Ni-Ta-O melts in equilibrium with solid CaOIshii, F. et al. | 1995
- 1021
-
Deoxidation equilibrium of molten nickel by Al-Mn and Al-MgZhao, Y. H. et al. | 1995
- 1022
-
Influence of At concentration on composition of inclusions in Si-Mn killed steelNabeshima, S. et al. | 1995
- 1023
-
Thermodynamics of Fe~tO-TiO~2-SiO~2 melts in equilibrium with solid ironMatsuzaki, K. et al. | 1995
- 1025
-
Phase equilibria in Fe-Cu-P ternary alloyNagasaka, T. et al. | 1995
- 1026
-
phosphorus dissolution into molten siliconMiki, T. et al. | 1995
- 1027
-
Electron beam melting of silicon to remove phosphorus, aluminum and calciumHanazawa, K. et al. | 1995
- 1028
-
Liquid flow behavior gas and liquid two-phase flow in an immersion nozzleKasai, N. et al. | 1995
- 1029
-
Bubble formation at slit nozzle in waterOkumura, K. et al. | 1995
- 1030
-
Dispersion of particles in a bottom blowing bathNakamura, K. et al. | 1995
- 1031
-
The measurement of bubble shape with multi-needle electro-resistivity probeNakatani, T. et al. | 1995
- 1032
-
Investigation of wave motions on a cylindrical bottom blown bath using laser displacement sensorOkita, K. et al. | 1995
- 1033
-
Model experiment of gas removal from melt during exhausting periodOsada, C. et al. | 1995
- 1034
-
Rate of deoxidation of liquid iron by MgO-C porous tubeAhmadi, M. et al. | 1995
- 1035
-
Water-model experiment on the turbulence coagulation of non-metallic inclusions in molten steelIse, T. et al. | 1995
- 1036
-
Evaporation behavior of molten copper and pig iron by urea additionMomono, T. et al. | 1995
- 1037
-
Determination of the rate of CO~2 dissociation on the surface of CaO-Al~2O~3 and CaO-SiO~2 meltsMori, M. et al. | 1995
- 1038
-
Effect of acoustic field on foam behaviorSergey, K. et al. | 1995
- 1039
-
High speed casting of stainless steel at Chiba Works No.4 casterTakashi, M. et al. | 1995
- 1040
-
On optimized mold length in high speed slab castingWolf, M. M. et al. | 1995
- 1041
-
Development of the high speed casting and high quality continuous cast billet(X MOLD)Sato, T. et al. | 1995
- 1042
-
Development of the continuous casting process of hollow billetHarada, H. et al. | 1995
- 1043
-
Construction of plasma heater at Chiba No.4 CCKamiyama, T. et al. | 1995
- 1044
-
Tensile strength of 0.6B-SUS304 stainless steel during solidification (Continuous casting of stainless steel contained boron-1)Mizukami, H. et al. | 1995
- 1045
-
Continuous casting of SUS304 steel contained 0.6% boron (Continuous casting of stainless steel contained boron-2)Kawamoto, M. et al. | 1995
- 1046
-
Automated ladle operation in the continuous casting lines at Nagoya WorksItoh, A. et al. | 1995
- 1047
-
Development of diagnosis system for continuous castingKaneko, K. et al. | 1995
- 1048
-
Improvement of operation and quality of bloom caster by auto start controlHashimoto, Y. et al. | 1995
- 1049
-
Kinetics on reoxidation in molten steel by slag (Reoxidation mechanism in Al killed steel-1)Tago, Y. et al. | 1995
- 1050
-
Effect of slag composition on reoxidation in molten steel (Reoxidation mechanism in Al killed steel-2)Higuchi, Y. et al. | 1995
- 1051
-
Development of calcium treatment technologies for HIC-resistant steelOotsuka, M. et al. | 1995
- 1052
-
Morphology control of MnS of low carbon resulphurized steelSakata, M. et al. | 1995
- 1053
-
Behavior of formation of large-sized Nb(C,N) particles in Nb-bearing low alloy steelSuzuki, T. et al. | 1995
- 1054
-
Change of MgO content in inclusion during Ca treatmentNumata, M. et al. | 1995
- 1055
-
The cleanliness of maraging steel by EB processNoguchi, H. et al. | 1995
- 1056
-
Numerical calculation for the molten steel flow analysis in a large tundishKubo, N. et al. | 1995
- 1057
-
Decrease of slag inclusions in tundish with seal pipeNakanishi, K. et al. | 1995
- 1058
-
Oxidation rate of molten steel in still state (Oxidation behavior of molten steel in tundish-1)Sasai, K. et al. | 1995
- 1059
-
Oxidation rate of molten steel in stirred state (Oxidation behavior of molten steel in tundish-2)Sasai, K. et al. | 1995
- 1060
-
Study on the cleanliness of transition of continuous casting slabsNakajima, J. et al. | 1995
- 1061
-
Improvement of casting conditions for critical steel grade in continuous recycle operation of tundish under hot conditionNakao, M. et al. | 1995
- 1062
-
Repair and re-start of Kobe No.3 BF after Hanshin earthquakeIshiwaki, S. et al. | 1995
- 1063
-
Usage of large amount of small sized s inter in blast furnace under high productivityWatanabe, T. et al. | 1995
- 1064
-
The operation with larger amount of nut coke under high pulverized coal rateTanaka, M. et al. | 1995
- 1065
-
Gas distribution control of blast furnace at wearing profileToda, Y. et al. | 1995
- 1066
-
Effect of high speed rotation of bell-less chute on the burden distributionNouchi, T. et al. | 1995
- 1067
-
Operation result of decreasing Si at Kashima No.2 and No.3 blast furnaceSasaki, T. et al. | 1995
- 1068
-
Consideration of prediction method of blast furnace operation condition (Application of chaos technology for blast furnace-1)Tsukuji, H. et al. | 1995
- 1069
-
Detection of dead-man activity by tuyere probe (Development of detecting technology of activity in blast furnace dead-man-2)Tomita, S. et al. | 1995
- 1070
-
Development of combustion monitoring system for A blast furnaceChoi, T.-H. et al. | 1995
- 1071
-
Analysis of fluid flow and heat transfer in the blast furnace using the simplified four fluid modelAustin, P. R. et al. | 1995
- 1072
-
Influence of gas flow on stress field of the packed bed in blast furnace (Stress analysis of the packed bed in blast furnace-2)Wakabayashi, S. et al. | 1995
- 1073
-
Measurement of liquid flow distribution in two-dimensional cold model for dropping zone of blast furnaceKawabata, H. et al. | 1995
- 1074
-
Effect of thermal resistance in a sphere on apparent convective heat transfer coefficientSato, K. et al. | 1995
- 1075
-
Experimental evaluation on continuity of liquid flow in a trickle packed bedMingkai, N. et al. | 1995
- 1076
-
Effect of packed bed conditions on the liquid hold-up and the liquid velocitySugiyama, T. et al. | 1995
- 1077
-
Initial reduction of wustite containing CaO with CO-CO~2 gas mixtureInami, T. et al. | 1995
- 1078
-
Desulfurization and suppression of swelling in H~2+H~2O atmosphere during iron formation from iron ore-carbon mixed pelletSakamoto, H. et al. | 1995
- 1079
-
Measurement of reduction rate of hematite powder with CO-CO~2 gas mixture by using thermo-balanceAraki, I. et al. | 1995
- 1080
-
Reduction behavior of ternary calcium ferrite at high temperatureMaeda, T. et al. | 1995
- 1081
-
Numerical simulation of the cupola process for reduction and melting of the oxidized iron briquetteZhang, X. et al. | 1995
- 1082
-
Effect of gas species on the reduction rate of iron-scrap briquette including pulverized cokeZhang, X. et al. | 1995
- 1083
-
Numerical analysis of fluid flow and heat transfer in a high-frequency-induction melting furnace with coke-packed bedMingkai, N. et al. | 1995
- 1084
-
Evaluation of ore characteristics by tablet observation at melting stageKozono, T. et al. | 1995
- 1085
-
Mineralogical properties of pellet feed for iron ore sinter (Effective use of pellet feed in sintering process of iron ores-1)Okazaki, J. et al. | 1995
- 1086
-
Quantitative evaluation of assimilation of fluxes in iron ore sinteringHiguchi, K. et al. | 1995
- 1087
-
Phase relation for high Fe~2O~3 comer of system CaO-Fe~2O~3-Al~2O~3Watanabe, S. et al. | 1995
- 1088
-
Behavior of Al~2O~3 in the process of calcium ferrite formationHirakata, K. et al. | 1995
- 1089
-
Fundamental research for drying of iron ore pelletsBaoju, P. et al. | 1995
- 1090
-
Development of operation and control system at raw material system (Rationalization of raw material handling process at Chiba Works-2)Sakuma, Y. et al. | 1995
- 1091
-
Numerical simulation for the discharging behavior of bucket elevator in a continuous ship unloader by DEMIda, M. et al. | 1995
- 1092
-
Development of constant reclaiming control technologyMiyata, J. et al. | 1995
- 1093
-
Development of timely measuring method of hot metal temperature by immersion type fiber-optic radiation thermometerWakai, H. et al. | 1995
- 1094
-
The establishment of quick repair technique for ceramic burner in hot stoveNishimura, Y. et al. | 1995
- 1095
-
Relining and operation of Kure No. 1 blast furnaceTerayama, O. et al. | 1995
- 1096
-
Improvement of trough maintenance by hot castingTagawa, H. et al. | 1995
- 1097
-
Development of compact automatic boring machine for blast furnace wallHashimoto, Y. et al. | 1995
- 1098
-
Effects of temperature and porosity on potassium attack on carbon refractoriesKasai, A. et al. | 1995
- 1099
-
Recycling technology of oily wastes in iron and steel plantsKim, K.-T. et al. | 1995
- 1100
-
Observation of zinc in BOF dust and its formation mechanismTakashima, S. et al. | 1995
- 1101
-
Effective use of slag and iron source produced at the steelmaking processYahata, T. et al. | 1995
- 1102
-
Development of pressure vessel type steam aging process for steelmaking slag (pressurized steam aging system)Nishimu, Y. et al. | 1995
- 1103
-
Operation of steam-aging facilities for steelmaking slagKamei, K. et al. | 1995
- 1104
-
Development of regenerative combustion burnerOoishi, H. et al. | 1995
- 1105
-
Condition for formation of mushroom atop the single nozzleKomatani, M. et al. | 1995
- 1106
-
Development of steelmaking process using SRP for ultra low sulphur steelKikuchi, J. et al. | 1995
- 1107
-
Decrease of carrier slag from converter at the topKobuke, S. et al. | 1995
- 1108
-
Effect of converter-slag composition on its high temperature fluidityTakahashi, K. et al. | 1995
- 1109
-
Effect of current conducting aluminum electrode armsNagatani, A. et al. | 1995
- 1110
-
Influence of iron and flux composition on the interfacial tension between molten iron and fluxYoneda, N. et al. | 1995
- 1111
-
Measurement of density and solidifying shrinkage of steelYokoyama, T. et al. | 1995
- 1112
-
Viscosity of Fe-Cu-Si ternary alloyWashizu, T. et al. | 1995
- 1113
-
Enthalpy of Fe-Cu-Si ternary alloyWashizu, T. et al. | 1995
- 1114
-
Investigation of periodical change of molten steel flow in continuous casting moldTozawa, H. et al. | 1995
- 1115
-
Cooling behavior and slab qualities of mild cooling mold castingYamauchi, A. et al. | 1995
- 1116
-
Water model measurement on flow pattern in slab mold by submerged entry nozzle (Part 7: Control of flow in slab CC mold by imposing swirling motion)Yokoya, S. et al. | 1995
- 1117
-
Water model measurement on flow pattern in CC mold by submerged entry nozzle without opposite face (Part 8: Control of flow in billet CC mold with off-center entry nozzle by imposing swirling motion)Kukinaka, T. et al. | 1995
- 1118
-
Sliding-gate and un-even flow -Study of immersion nozzle in continuous casting of steel part 2Souma, H. et al. | 1995
- 1119
-
Magnetohydrodynamics calculation in flee surfaceFujisaki, K. et al. | 1995
- 1120
-
Wave generation on molten metal using intermittent AC magnetic fieldChino, Y. et al. | 1995
- 1121
-
Natural convection of liquid metal under a magnetic field with electro-conducting wallsTagawa, T. et al. | 1995
- 1122
-
Experiment on the separation of nonmetallic inclusions from liquid metal by pinch forceTakeuchi, Y. et al. | 1995
- 1123
-
Effect of electro magnetic force on the shape of primary dendrites in alloysKusu, R. et al. | 1995
- 1124
-
Separation of mixed two liquids by use of electromagnetic forceKojima, M. et al. | 1995
- 1125
-
Stability of the separation of chemistry in bimetallic slab casting process with LMF (Hydromagnetic casting of bimetallic slab-4)Zeze, M. et al. | 1995
- 1126
-
Phenomenon of bubble entrapment during solidification of paraffinYuan, F. et al. | 1995
- 1127
-
Effects of primary crystal shape on peritectic reaction rate in Fe-C systemMaruya, H. et al. | 1995
- 1128
-
In-situ observation of solidification of steel by using a confocal laser scanning microscopeChikama, H. et al. | 1995
- 1129
-
Effect of composition on the premelting behavior of carbon steelsYu Chang Hee et al. | 1995
- 1130
-
Effect of carbon content on the deflection angle of dendrite growing in the flowing mediaEsaka, H. et al. | 1995
- 1131
-
Grain refinement in melt-spun binary alloysMatsuki, R. et al. | 1995
- 1132
-
Dissolution of MgO sources into molten slag (Development of new stainless steel-6)Miyata, Y. et al. | 1995
- 1133
-
Improvement of slag control in stainless steel refining furnace (Development of new stainless steel refining process-7)Inoue, A. et al. | 1995
- 1134
-
Behavior of decomposition reaction of carbon dioxide gas in stainless steel meltsNakao, R. et al. | 1995
- 1135
-
New stainless steel refining process based on slag-metal counter flow tank operationMiyata, M. et al. | 1995
- 1136
-
Hydrogen gas injection for promoting decarburization of stainless steel melt in VOD processHiraoka, H. et al. | 1995
- 1137
-
Improvement of AOD-VOD combination processSuzuki, Y. et al. | 1995
- 1138
-
Development of technology for producing high purity ferritic stainless steelsTajiri, Y. et al. | 1995
- 1139
-
Construction and operation of No.4 steelmaking shop at Chiba WorksNabeshima, Y. et al. | 1995
- 1140
-
Development of automatic blowing system for stainless decarburization process by EIC systemHirota, A. et al. | 1995
- 1142
-
The expression and the accumulation of inventory tree (Discussion on the methodology of environmental life cycle analysis-2)Harada, K. et al. | 1995
- 1143
-
Expression of the system with recycle (Discussion on the methodology of environmental life cycle analysis-3)Harada, K. et al. | 1995
- 1144
-
Environmental impacts assessment system for ecomaterialsSakai, S. et al. | 1995
- 1145
-
Online service for environment load data base of alloysIjima, K. et al. | 1995
- 1146
-
Life cycle assessment of ceramic-coated materialSonoya, K. et al. | 1995
- 1147
-
Life cycle analysis of ultra super crystal powder plant boiler tubesShibata, K. et al. | 1995