Journal of materials processing technology
The tables of contents are generated automatically and are based on the data records of the individual contributions available in the index of the TIB portal. The display of the Tables of Contents may therefore be incomplete.
Table of contents
- 1
-
Knowledge in materials processing technologyAllwood, Julian M. / Tekkaya, A. Erman et al. | 2008
- 3
-
Manufacturing process for a cylindrical crown gear drive with a controllable fourth order polynomial function of transmission errorLee, Cheng-Kang et al. | 2008
- 14
-
Determination of activation energy for crystallizations in Ni–Sn–P amorphous alloysYu, Jinku / Jing, Tianfu / Yang, Jun et al. | 2008
- 18
-
Slipline field modeling of orthogonal machining for a worn tool with elastic effects and adhesion friction at the contact regionsDundur, S.T. / Das, N.S. et al. | 2008
- 26
-
Microstructure and mechanical properties of AZ31 magnesium alloy sheets produced by differential speed rollingXia, Weijun / Chen, Zhenhua / Chen, Ding et al. | 2008
- 32
-
Research on the surface characteristics in ultrasonic grinding nano-zirconia ceramicsGao, G.F. / Zhao, B. / Xiang, D.H. et al. | 2008
- 38
-
Geometric parameter design of a cantilever probing needle used in epoxy ring probe cardChang, Dar-Yuan / Choi, Jing-Tung et al. | 2008
- 51
-
Simple scanner-based image analysis for corrosion testing: Concrete applicationGutierrez-Padilla, Ma.Guadalupe D. / Bielefeldt, Angela / Ovtchinnikov, Serguei et al. | 2008
- 58
-
Study of three-dimensional spacer fabrics: Molding properties for intimate apparel applicationYip, Joanne / Ng, Sun-Pui et al. | 2008
- 63
-
Mechanical deterioration of polyethylene greenhouses covering under arid conditionsAlhamdan, Abdullah M. / Al-Helal, Ibrahim M. et al. | 2008
- 70
-
Copper brazing response of some advanced high strength steel gradesSong, R. / Schroth, J.G. / Speer, J.G. et al. | 2008
- 77
-
Laser treatment of aluminum surface: Analysis of thermal stress field in the irradiated regionYilbas, B.S. / Arif, A.F.M. / Karatas, C. et al. | 2008
- 89
-
Study of channel angle influence on material flow and strain inhomogeneity in equal channel angular pressing using 3D finite element simulationPatil Basavaraj, V. / Chakkingal, Uday / Prasanna Kumar, T.S. et al. | 2008
- 96
-
Synthesis of nanocrystalline Bi2Te3 via mechanical alloyingZakeri, M. / Allahkarami, M. / Kavei, Gh. et al. | 2008
- 102
-
Mathematical modeling of surface roughness for evaluating the effects of cutting parameters and coating materialCakir, M. Cemal / Ensarioglu, Cihat / Demirayak, Ilker et al. | 2008
- 110
-
Optimization methods for the tube hydroforming process applied to advanced high-strength steels with experimental verificationAbedrabbo, Nader / Worswick, Michael / Mayer, Robert et al. | 2008
- 124
-
Metal direct prototyping by using hybrid plasma deposition and millingXiong, Xinhong / Zhang, Haiou / Wang, Guilan et al. | 2008
- 131
-
Relief making on bearing sleeve surface by eccentric burnishingKorzynski, Mieczyslaw et al. | 2008
- 139
-
In situ measurement of bond resistance varying with process parameters during ultrasonic wedge bondingJi, Hongjun / Li, Mingyu / Wang, Chunqing et al. | 2008
- 145
-
Tool breakage diagnosis in face milling by support vector machineHsueh, Yao-Wen / Yang, Chan-Yun et al. | 2008
- 153
-
A comparative study of viscous polymer processed ceramics based on aqueous and non-aqueous binder systemsSu, B. / Button, T.W. et al. | 2008
- 158
-
Analysis of thickness distribution of square-sectional hydroformed partsXu, Xianghe / Li, Shuhui / Zhang, Weigang et al. | 2008
- 165
-
Advantages of nanocomposite coatings deposited by high power pulse magnetron sputtering technologyBobzin, K. / Bagcivan, N. / Immich, P. et al. | 2008
- 171
-
A new process proposal for continuous fabrication of rheological material by rotational barrel with stirring screw and its microstructural evaluationSeo, P.K. / Lee, S.M. / Kang, C.G. et al. | 2008
- 181
-
Microstructure and stress rupture property of titanium-containing 11Cr ferritic/martensitic steelsYin, Feng-shi / Jung, Woo-sang et al. | 2008
- 186
-
The role of plastic slip anisotropy in the modelling of strain path change effectsViatkina, E.M. / Brekelmans, W.A.M. / Geers, M.G.D. et al. | 2008
- 194
-
Strain measurement under the minimal controller synthesis algorithm and an extensometer designBulut, S. et al. | 2008
- 202
-
FEM simulation of periodical local heating caused by Laser Interference MetallurgyLasagni, A. / Mücklich, F. et al. | 2008
- 210
-
Effect of grain refiner and grain size on the susceptibility of Al–Mg die casting alloy to cracking during solidificationKimura, Ryosuke / Hatayama, Haruaki / Shinozaki, Kenji et al. | 2008
- 220
-
Highly (100)-textured Pb(Zr0.52Ti0.48)O3 film derived from a modified sol–gel technique using inorganic zirconium precursorYang, F. / Fei, W.D. / Sun, Q. et al. | 2008
- 225
-
Optimization of machining parameters of Al/SiC-MMC with ANOVA and ANN analysisMuthukrishnan, N. / Davim, J. Paulo et al. | 2008
- 233
-
The influence of SDS and CTAB surfactants on the surface morphology and surface topography of electroless Ni–P depositsElansezhian, R. / Ramamoorthy, B. / Nair, P. Kesavan et al. | 2008
- 241
-
Numerical studies on controlling of process parameters in friction stir weldingZhang, Z. / Zhang, H.W. et al. | 2008
- 271
-
Optimization about multilayer laminated film and getter device materials of vacuum insulation panel for using at high temperatureAraki, Kuninari / Kamoto, Daigorou / Matsuoka, Shin-ichi et al. | 2008
- 283
-
Forming characteristics of tubular product through the rotary swaging processLim, Seong-Joo / Choi, Ho-Joon / Lee, Chi-Hwan et al. | 2007
- 289
-
Shape optimization of clinching tools using the response surface methodology with Moving Least-Square approximationOudjene, M. / Ben-Ayed, L. / Delamézière, A. et al. | 2008
- 297
-
On the prediction of delamination during deep-drawing of polymer coated metal sheetvan den Bosch, M.J. / Schreurs, P.J.G. / Geers, M.G.D. et al. | 2008
- 303
-
Performance of coated tungsten carbide tools on milling printed circuit boardLin, Zone-Ching / Ho, Chih-Yuan et al. | 2008
- 310
-
Analysis of the benefit generated by using fuzzy numbers in a TOPSIS model developed for machine tool selection problemsYurdakul, Mustafa / İç, Yusuf Tansel et al. | 2008
- 318
-
A comparative study between the mixed-oxide and high-energy milling planetary method on electrical and microstructural properties for a SnO2-based ceramic systemAguilar-Martínez, J.A. / Hernández, M.B. / Pech-Canul, M.I. et al. | 2008
- 324
-
Material optimization: A case study using sheet metal-forming analysisHariharan, K. / Balaji, C. et al. | 2008
- 332
-
Contour finish turning operations with coated grooved tools: Optimization of machining performanceHagiwara, M. / Chen, S. / Jawahir, I.S. et al. | 2008
- 343
-
Phase composition of 0.7Pb(Mg1/3Nb2/3)O3–0.3PbTiO3 film deposited by radio frequency magnetron sputteringWang, J.M. / Li, W.L. / Fei, W.D. et al. | 2008
- 348
-
Drug distribution within poly(ɛ-caprolactone) microspheres and in vitro releaseWang, Xudong / Wang, Yingjun / Wei, Kun et al. | 2008
- 348
-
Drug distribution within poly(epsilon-caprolactone) microspheres and in vitro releaseWang, Xudong / Wang, Yingjun / Wei, Kun et al. | 2009
- 355
-
Effect of sintering temperature on the structure and properties of polycrystalline cubic boron nitride prepared by SPSZhao, Yucheng / Wang, Mingzhi et al. | 2008
- 360
-
Investigation of the age hardening behaviour of 6063 aluminium alloys refined with Ti, RE and BZuo, Xiurong / Jing, Yuanwei et al. | 2008
- 367
-
Fatigue lives of friction stir spot welds in aluminum 6061-T6 sheetsWang, D.-A. / Chen, C.-H. et al. | 2008
- 376
-
Computational characterization of drawbeadsLarsson, Mats et al. | 2008
- 376
-
Computational characterization of drawbeads:A basic modeling method for data generationLarsson, M. et al. | 2009
- 387
-
Experimental and numerical assessment of Tailor-Welded Blanks formabilityGaied, Sadok / Roelandt, Jean-Marc / Pinard, Fabrice et al. | 2008
- 396
-
Numerical simulation for the multi-point stretch forming process of sheet metalCai, Zhong-Yi / Wang, Shao-Hui / Xu, Xu-Dong et al. | 2008
- 408
-
An analytical solution for tube sinking by strain rate vector inner-product integrationZhao, D.W. / Du, H.J. / Wang, G.J. et al. | 2008
- 416
-
Precipitation and Cr depletion profiles of Inconel 182 during heat treatments and laser surface meltingBao, Gang / Yamamoto, Motomichi / Shinozaki, Kenji et al. | 2008
- 426
-
Tension control in hot strip process using adaptive receding horizon controlJae Park, Cheol / Cheol Hwang, I et al. | 2008
- 435
-
Effects of cell size on compression and bending strength of aluminum-foamed material by complex stirring in induction heatingJeon, Y.P. / Kang, C.G. / Lee, S.M. et al. | 2008
- 445
-
Effect of flyer shape on the bonding criteria in impact welding of platesChizari, M. / Al-Hassani, S.T.S. / Barrett, L.M. et al. | 2008
- 455
-
Deformation behavior of inclusions in stainless steel strips during multi-pass cold rollingYu, Hai-liang / Liu, Xiang-hua / Bi, Hong-yun et al. | 2008
- 462
-
Single point incremental forming of PVCFranzen, V. / Kwiatkowski, L. / Martins, P.A.F. et al. | 2008
- 470
-
Finite element analysis and verification of laser marking on eggshellChen, Ming-Fei / Wang, Yan-Hsin / Hsiao, Wen-Tse et al. | 2008
- 477
-
Synthesis and characterization of LiFe0.9Mg0.1PO4/nano-carbon webs composite cathodeLiu, Hui / Xie, Jingying et al. | 2008
- 482
-
Microdeformation of soft particles in metal matrix compositesBalos, Sebastian / Sidjanin, Leposava et al. | 2008
- 488
-
Microstructural evaluation of ZrO2–MgO coatingsKhan, A. Nusair / Qureshi, I.N. et al. | 2008
- 497
-
Measurement of the mass transfer coefficient at workpiece surfaces in heat treatment furnacesGao, Weimin / Kong, Lingxue / Long, John M. et al. | 2008
- 506
-
Response to annealing treatment of a twin-roll cast thin AlFeMnSi stripBirol, Yücel et al. | 2008
- 511
-
Assessment of some factors influencing tool wear on the machining of glass fibre-reinforced plastics by coated cemented carbide toolsPalanikumar, K. / Davim, J. Paulo et al. | 2008
- 520
-
Investigation of diene addition on ethylene–propylene (EP) copolymerization with a zirconocene catalyst: Effects of diene types and E/P ratiosPhoowakeereewiwat, Sireethorn / Jongsomjit, Bunjerd / Praserthdam, Piyasan et al. | 2008
- 525
-
A fully automated nesting and piloting system for progressive diesGhatrehnaby, M. / Arezoo, B. et al. | 2008
- 536
-
Study and prevention of cracking during weld-repair of heat-resistant cast steelsBranza, T. / Deschaux-Beaume, F. / Sierra, G. et al. | 2008
- 548
-
Sintering of commercial mulite powder: Effect of MgO dopantSouto, P.M. / Menezes, R.R. / Kiminami, R.H.G.A. et al. | 2008
- 554
-
Process factor optimization for controlling pull-down defects in iron castingsSenthilkumar, B. / Ponnambalam, S.G. / Jawahar, N. et al. | 2008
- 561
-
Investigation on the preparation and machinability of the B4C/BN nanocomposites by hot-pressing processJiang, Tao / Jin, Zhihao / Yang, Jianfeng et al. | 2008
- 572
-
Microstructure and tensile behavior of multiply needled C/SiC composite fabricated by chemical vapor infiltrationNie, Jingjiang / Xu, Yongdong / Zhang, Litong et al. | 2008
- 577
-
Characterization and catalytic properties of nano-sized Pt metal catalyst on TiO2-SiO2 synthesized by photo-assisted deposition and impregnation methodsMohamed, R.M. et al. | 2008
- 584
-
The impact of corona modified fibres’ chemical changes on wool dyeingFakin, Darinka / Ojstršek, Alenka / Benkovič, Sonja Čelan et al. | 2008
- 590
-
Effect of starch filler content and sintering temperature on the processing of porous 3Y–ZrO2 ceramicsGarrido, L.B. / Albano, M.P. / Plucknett, K.P. et al. | 2008
- 599
-
Determination of optimum welding sequence and distortion forces in steel lattice beamsOzcatalbas, Yusuf / Vural, H. Ibrahim et al. | 2008
- 605
-
Effect of iron content on the formation of b-Al5FeSi and porosity in Al-Si eutectic alloysMoustafa, M. A. et al. | 2009
- 605
-
Effect of iron content on the formation of β-Al5FeSi and porosity in Al–Si eutectic alloysMoustafa, M.A. et al. | 2008
- 611
-
A simple model of throughput and pressure development for single screwBéreaux, Y. / Charmeau, J.-Y. / Moguedet, M. et al. | 2008
- 619
-
Design improvement using process capability dataDelaney, Kevin Dominic / Phelan, Pat et al. | 2008
- 625
-
A model of smoothing slide ball-burnishing and an analysis of the parameter interactionKorzynski, Mieczysław et al. | 2008