Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing
The tables of contents are generated automatically and are based on the data records of the individual contributions available in the index of the TIB portal. The display of the Tables of Contents may therefore be incomplete.
Table of contents
- 795
-
Effect of processing parameters on quench sensitivity of an AA7050 sheetZhang, Xinming / Liu, WenJun / Liu, ShengDan et al. | 2010
- 803
-
The necessity of dynamic precipitation for the occurrence of no-recrystallization temperature in Nb-microalloyed steelMousavi Anijdan, S.H. / Yue, S. et al. | 2010
- 808
-
Effect of Ca and Sr additions on high temperature and corrosion properties of Mg–4Al–2Sn based alloysKim, Byeong Ho / Park, Kyung Chul / Park, Yong Ho et al. | 2010
- 815
-
Nanoindentation and XRD investigations of single crystalline Ni–Ge brazed nickel-base superalloys PWA 1483 and René N5Neumeier, S. / Dinkel, M. / Pyczak, F. et al. | 2010
- 815
-
Nanoindentation and XRD investigations of single crystalline Ni-Ge brazed nickel-base superalloys PWA 1483 and Rene N5Neumeier, S. / Dinkel, M. / Pyczak, F. et al. | 2011
- 823
-
Influence of crack tip constraint on void growth in ductile FCC single crystalsBiswas, P. / Narasimhan, R. / Tewari, A. et al. | 2010
- 832
-
A normalized damage variable for ductile metals based on toughness performanceHe, Min / Li, Fuguo / Ali, Nazakat et al. | 2010
- 838
-
Effects of extrusion ratio on the ratcheting behavior of extruded AZ31B magnesium alloy under asymmetrical uniaxial cyclic loadingZhang, X.P. / Castagne, S. / Luo, X.F. et al. | 2010
- 846
-
High strain rate mechanical behavior of epoxy under compressive loading: Experimental and modeling studiesNaik, N.K. / Shankar, Parimi Jaya / Kavala, Venkateswara Rao et al. | 2010
- 855
-
Boron effects on the ductility of a nano-cluster-strengthened ferritic steelZhang, Z.W. / Liu, C.T. / Guo, S. et al. | 2010
- 860
-
Void evolution in nanocrystalline metal film under uniform tensile stressHu, Lingling / Zhou, Jianqiu et al. | 2010
- 868
-
Strain hardening behavior of a TRIP/TWIP steel with 18.8% MnDing, Hao / Ding, Hua / Song, Dan et al. | 2010
- 874
-
Texture and mechanical properties of ultrafine-grained Mg–3Al–1Zn alloy sheets prepared by high-ratio differential speed rollingKim, W.J. / Lee, H.W. / Yoo, S.J. et al. | 2010
- 880
-
Transformations and structures in the Al–Zn–Mg alloy system: A diffraction study using synchrotron radiation and electron precessionKverneland, A. / Hansen, V. / Thorkildsen, G. et al. | 2010
- 888
-
Enhancing strength and hardness of AZ31B through simultaneous addition of nickel and nano-Al2O3 particulatesNguyen, Q.B. / Tun, K.S. / Chan, J. et al. | 2010
- 895
-
Flow stress and ductility of AA7075-T6 aluminum alloy at low deformation temperaturesPuchi-Cabrera, E.S. / Staia, M.H. / Ochoa-Pérez, E. et al. | 2010
- 906
-
Tensile fracture and thermal conductivity characterization of toughened epoxy/CNT nanocompositesBalakrishnan, Anandh / Saha, Mrinal C. et al. | 2010
- 914
-
Effect of laser shock processing on fatigue crack growth of duplex stainless steelRubio-González, C. / Felix-Martinez, C. / Gomez-Rosas, G. et al. | 2010
- 920
-
The tempering behavior of granular structure in a Mn-series low carbon steelZhang, Han / Cheng, Xiaole / Bai, Bingzhe et al. | 2010
- 925
-
Thermomechanical properties of poly(vinyl alcohol) plasticized with varying ratios of sorbitolMohsin, Mahmood / Hossin, Asiful / Haik, Yousef et al. | 2010
- 931
-
Influence of intermediate annealing on final Goss texture formation in low temperature reheated Fe-3%Si steelGuo, Wei / Mao, Wei-min / Li, Yang et al. | 2010
- 935
-
Factors influencing the GBF size of high strength steels in the very high cycle fatigue regimeLiu, Y.B. / Li, S.X. / Li, Y.D. et al. | 2010
- 943
-
Improvement in rollability of AZ91 magnesium alloy by carbon additionWang, Ling / Kim, Young Min / Lee, Jehyun et al. | 2010
- 950
-
Mechanical experiments on the superplastic material ALNOVI-1, including leak informationSnippe, Q.H.C. / Meinders, T. et al. | 2010
- 961
-
Hot deformation behavior of an extruded Mg–Li–Zn–RE alloyChen, Zhaoyun / Li, Zhiqiang / Yu, Chun et al. | 2010
- 967
-
In situ studies of evolution of microstructure with temperature in heavily deformed Ti-modified austenitic stainless steel by X-ray diffraction techniqueChowdhury, P.S. / Gayathri, N. / Mukherjee, P. et al. | 2010
- 973
-
Stress induced deformation in the solidification of undercooled Co80Pd20 alloysZhou, Shengyin / Hu, Rui / Li, Jinshan et al. | 2010
- 978
-
High-growth rate YSZ thermal barrier coatings deposited by MOCVD demonstrate high thermal cycling lifetimeVaranasi, V.G. / Besmann, T.M. / Payzant, E.A. et al. | 2010
- 986
-
Effects of rheocasting and heat treatment on microstructure and mechanical properties of A356 alloyBoChao, Liao / YoungKoo, Park / HongSheng, Ding et al. | 2010
- 996
-
Microstructural and thermal processing effects on adding 1 and 3 w/o Ti to a powder metallurgy processed quaternary Ni–Cr–Fe–Al alloyAkinlade, D.A. / Caley, W.F. / Richards, N.L. et al. | 2010
- 1003
-
Effects of sensitisation-induced martensitic transformation on the tensile behaviour of 304 austenitic stainless steelLo, K.H. / Zeng, D. / Kwok, C.T. et al. | 2010
- 1008
-
Stability of shot peening induced residual stresses and their influence on fatigue lifetimeDalaei, K. / Karlsson, B. / Svensson, L.-E. et al. | 2010
- 1016
-
Investigation of effect of siliconization conditions on mechanical properties of 3D-stitched C–SiC compositesKumar, Suresh / Kumari, Sweety / Kumar, Anil et al. | 2010
- 1023
-
Axi-symmetric forward spiral extrusion, a kinematic and experimental studyKhoddam, S. / Farhoumand, A. / Hodgson, P.D. et al. | 2010
- 1030
-
Influence of Fe-additives on the microstructure and mechanical properties of vacuum copper condensatesUstinov, A.I. / Skorodzievskii, V.S. / Fesiun, O.V. et al. | 2010
- 1037
-
Micromechanical modeling of the work-hardening behavior of single- and dual-phase steels under two-stage loading pathsYoshida, Kengo / Brenner, Renald / Bacroix, Brigitte et al. | 2010
- 1047
-
High-strength magnesium alloys for degradable implant applicationsGunde, P. / Hänzi, A.C. / Sologubenko, A.S. et al. | 2010
- 1055
-
Creep behavior of near-peritectic Sn–5Sb solders containing small amount of Ag and CuEl-Daly, A.A. / Mohamad, A.Z. / Fawzy, A. et al. | 2010
- 1063
-
Effect of alloying elements on the creep behavior of high Pb-based soldersSchoeller, Harry / Bansal, Shubhra / Knobloch, Aaron et al. | 2010
- 1071
-
Strain dependent rate equation to predict elevated temperature flow behavior of modified 9Cr-1Mo (P91) steelSamantaray, Dipti / Phaniraj, C. / Mandal, Sumantra et al. | 2010
- 1078
-
Cyclic loadings and crystallization of natural rubber: An explanation of fatigue crack propagation reinforcement under a positive loading ratioSaintier, N. / Cailletaud, G. / Piques, R. et al. | 2010
- 1087
-
Multi-mechanism damage-plasticity model for semi-crystalline polymer: Creep damage of notched specimen of PA6Saï, K. / Laiarinandrasana, L. / Naceur, I. Ben et al. | 2010
- 1094
-
Influence of laser deposition patterns on part distortion, interior quality and mechanical properties by laser solid forming (LSF)Yu, Jun / Lin, Xin / Ma, Liang et al. | 2010
- 1105
-
Effect of volume fraction and particle size of alumina reinforcement on compaction and densification behavior of Al–Al2O3 nanocompositesRazavi-Tousi, S.S. / Yazdani-Rad, R. / Manafi, S.A. et al. | 2010
- 1111
-
Nanoindentation of hard multilayer coatings: Finite element modellingZhao, Xiaoli / Xie, Zonghan / Munroe, Paul et al. | 2010
- 1117
-
A novel C-free Co-based alloy for high temperature tooling applicationsBirol, Yucel et al. | 2010
- 1125
-
Factors affecting recovery stress in Fe–Mn–Si–Cr–Ni–C shape memory alloysWang, C.P. / Wen, Y.H. / Peng, H.B. et al. | 2010
- 1131
-
Effects of particle size and distribution on the mechanical properties of SiC reinforced Al–Cu alloy compositesWang, Zhangwei / Song, Min / Sun, Chao et al. | 2010
- 1138
-
A comparative study of laser beam welding and laser–MIG hybrid welding of Ti–Al–Zr–Fe titanium alloyLi, Ruifeng / Li, Zhuguo / Zhu, Yanyan et al. | 2010
- 1143
-
Microstructure and enhanced mechanical properties of an Mg–10Gd–2Y–0.5Zr alloy processed by cyclic extrusion and compressionPeng, Tao / Wang, Qudong / Lin, Jinbao et al. | 2010
- 1149
-
Microstructure and mechanical properties of ZA62 Mg alloy by equal-channel angular pressingYan, Kai / Sun, Yang-Shan / Bai, Jing et al. | 2010
- 1154
-
A unified constitutive model for quasi-static flow responses of pure Ta and Ta–W alloysPark, Chan Hee / Hong, Seong-Gu / Lee, Chong Soo et al. | 2010
- 1162
-
Role of initial texture on the plastic anisotropy of Mg–3Al–1Zn alloy at various temperaturesLee, Byoung Ho / Park, Sung Hyuk / Hong, Seong-Gu et al. | 2010
- 1173
-
The effects of Cr2O3 nanoparticles on strength assessments and water permeability of concrete in different curing mediaNazari, Ali / Riahi, Shadi et al. | 2010
- 1183
-
Improvement compressive strength of concrete in different curing media by Al2O3 nanoparticlesNazari, Ali / Riahi, Shadi et al. | 2010
- 1192
-
Influence of functionalization on properties of MWCNT–epoxy nanocompositesTheodore, Merlin / Hosur, Mahesh / Thomas, Jonathan et al. | 2010
- 1201
-
Investigation on cracking mechanism of austenite stainless steel during in situ tension in transmission electron microscopeZhang, Peng / Hu, Hongyan / Liu, Yuanyuan et al. | 2010
- 1205
-
Research on the hot deformation behavior of Ti40 alloy using processing mapSun, Y. / Zeng, W.D. / Zhao, Y.Q. et al. | 2010
- 1212
-
Consolidation and mechanical properties of nanostructured MoSi2–SiC–Si3N4 from mechanically activated powder by high frequency induction heated sinteringShon, In-Jin / Lee, Dong-Mok / Doh, Jung-Mann et al. | 2010
- 1216
-
The effect of stress relaxation loading cycles on the creep behaviour of 2.25Cr–1Mo pressure vessel steelHumphries, S.R. / Yeung, W.Y. / Callaghan, M.D. et al. | 2010
- 1221
-
Enhanced sintering rate and finer grain size in yttria-stablized zirconia (3Y-TZP) with combined DC electric field and increased heating rateYang, Di / Conrad, Hans et al. | 2010
- 1226
-
Problems in using a comb sample as a stress-free reference for the determination of welding residual stress by diffractionGanguly, S. / Edwards, L. / Fitzpatrick, M.E. et al. | 2010
- 1233
-
The variation of tensile characteristics of Al–2wt.%Ag and Al–2wt.%Ag–1wt.%Sn alloys during transformationNada, R.H. et al. | 2010
- 1238
-
High strain-rate plastic flow behavior of Ti–6Al–4V from dynamic indentation experimentsKumaraswamy, A. / Vasudeva Rao, V. et al. | 2010
- 1242
-
The effects of post annealing on the mechanical properties, microstructure and texture evolutions of pure copper deformed by twist extrusion processAkbari Mousavi, S.A.A. / Bahadori, Sh. Ranjbar et al. | 2010
- 1247
-
Influence of deep cryogenic treatment on internal friction behavior in the process of temperingLi, Shaohong / Min, Na / Deng, Lihui et al. | 2010
- 1251
-
The structure and properties of NiAl formed by SHS using induction heatingZhu, X. / Zhang, T. / Marchant, D. et al. | 2010
- 1261
-
Effect of Ca, RE elements and semi-solid processing on the microstructure and creep properties of AZ91 alloyNami, B. / Shabestari, S.G. / Razavi, H. et al. | 2010
- 1268
-
Microstructure and texture studies on twin-roll cast AZ31 (Mg–3wt.%Al–1wt.%Zn) alloy and the effect of thermomechanical processingMasoumi, M. / Zarandi, F. / Pekguleryuz, M. et al. | 2010
- 1280
-
Microstructure evolution in a 3%Co modified P911 heat resistant steel under tempering and creep conditionsKipelova, A. / Kaibyshev, R. / Belyakov, A. et al. | 2010
- 1287
-
Spark plasma sintered tantalum carbide: Effect of pressure and nano-boron carbide addition on microstructure and mechanical propertiesBakshi, Srinivasa R. / Musaramthota, Vishal / Lahiri, Debrupa et al. | 2010
- 1296
-
More insights into fatigue crack growth from experiments on steels and aluminium alloys—ThresholdsSteinbock, J. / Gudladt, H.-J. et al. | 2010
- 1302
-
Microstructure and mechanical properties of pulsed electric current sintered B4C–TiB2 compositesHuang, S.G. / Vanmeensel, K. / Malek, O.J.A. et al. | 2010
- 1310
-
Nano-grain evolution in austenitic stainless steel during multi-directional forgingNakao, Y. / Miura, H. et al. | 2010
- 1318
-
Modeling mechanical effects on promotion and retardation of martensitic transformationMaalekian, Mehran / Kozeschnik, Ernst et al. | 2010
- 1326
-
Processing, microstructure and mechanical properties of nickel particles embedded aluminium matrix compositeYadav, Devinder / Bauri, Ranjit et al. | 2010
- 1334
-
Processing of AZ31 magnesium alloy by a new noble severe plastic deformation methodFatemi-Varzaneh, S.M. / Zarei-Hanzaki, A. et al. | 2010
- 1340
-
Deformation behavior and the Portevin-Le Chatelier effect in a modified 18Cr–8Ni stainless steelNikulin, I. / Kaibyshev, R. et al. | 2010
- 1348
-
Evaluation of interfacial bonding in dissimilar materials of YSZ–alumina composites to 6061 aluminium alloy using friction weldingUday, M.B. / Ahmad Fauzi, M.N. / Zuhailawati, H. et al. | 2010
- 1360
-
Effect of NiCrAlY platelets inclusion on the mechanical and thermal shock properties of glass matrix compositesChen, Minghui / Zhu, Shenglong / Shen, Mingli et al. | 2010
- 1367
-
Preparation of H-bar cross-sectional specimen for in situ TEM straining experiments: A FIB-based method applied to a nitrided Ti–6Al–4V alloyCastany, P. / Legros, M. et al. | 2010
- 1372
-
Effect of processing parameters on the evolution of dislocation density and sub-grain size of a 12%Cr heat resistant steel during creep at 650°CRojas, D. / Garcia, J. / Prat, O. et al. | 2010
- 1372
-
Effect of processing parameters on the evolution of dislocation density and sub-grain size of a 12%Cr heat resistant steel during creep at 650^oCRojas, D. / Garcia, J. / Prat, O. et al. | 2011
- 1382
-
Fracture resistance improvement of polypropylene by joint action of core–shell particles and nucleating agentYang, Gang / Han, Liang / Ding, Haifeng et al. | 2010
- 1391
-
Strain-softening behavior of an Fe–6.5wt%Si alloy during warm deformation and its applicationsFu, Huadong / Zhang, Zhihao / Yang, Qiang et al. | 2010
- 1396
-
Hot compression deformation behavior and processing parameters of a cast Mg–Gd–Y–Zr alloyLi, Li / Zhang, Xinming et al. | 2010
- 1402
-
On deformation twinning in a 17.5% Mn–TWIP steel: A physically based phenomenological modelSoulami, A. / Choi, K.S. / Shen, Y.F. et al. | 2010
- 1409
-
The crack propagating behavior of composite coatings prepared by PEO on aluminized steel during in situ tensile processingChen, Zhitong / Li, Guang / Wu, Zhenqiang et al. | 2010
- 1415
-
Optimization of bond strength between gold alloy and porcelain through a composite interlayer obtained by powder metallurgyHenriques, B. / Soares, D. / Silva, F.S. et al. | 2010
- 1421
-
Effect of solid content on pore structure and mechanical properties of porous silicon nitride ceramics produced by freeze castingYe, Feng / Zhang, Jingyi / Liu, Limeng et al. | 2010
- 1425
-
Morphology of the boron-rich phase along columnar grain boundary and its effect on the compression crack of Fe–6.5Si–0.05B alloyFu, Huadong / Zhang, Zhihao / Yang, Qiang et al. | 2010
- 1431
-
Deformation mechanism maps for micro-grained, ultrafine-grained, and nano-grained materialsMohamed, Farghalli A. et al. | 2010
- 1436
-
Fracture behavior and mechanism of 2D C/SiC–BCx composite at room temperatureLiu, Yongsheng / Cheng, Laifei / Zhang, Litong et al. | 2010
- 1442
-
Annealing effects on microstructure and coercive field of ferritic–martensitic ODS Eurofer steelRenzetti, R.A. / Sandim, H.R.Z. / Sandim, M.J.R. et al. | 2010
- 1448
-
Hot working behavior of 2205 austenite–ferrite duplex stainless steel characterized by constitutive equations and processing mapsMomeni, A. / Dehghani, K. et al. | 2010
- 1455
-
Optimization of ZnO sheets dimension in terms of ductility, micro-indentation, mechanical resistance, Amlouk-Boubaker optothermal expansivity and crystallites sizeBoubaker, K. et al. | 2010
- 1458
-
In-plane shear strength of a carbon/carbon composite at different loading rates and temperaturesYan, K.F. / Zhang, C.Y. / Qiao, S.R. et al. | 2010
- 1463
-
Effects of La addition on the elevated temperature properties of the casting Al–Cu alloyYao, Dongming / Xia, Yumei / Qiu, Feng et al. | 2010
- 1467
-
Stress relaxation behavior of Cu/Sn/Cu micro-connect after electrical currentLiu, H.Y. / Zhu, Q.S. / Wang, Z.G. et al. | 2010
- 1472
-
Properties of geopolymer from circulating fluidized bed combustion coal bottom ashTopçu, İlker Bekir / Toprak, Mehmet Uğur et al. | 2010
- 1478
-
Microstructure, mechanical properties and electrical conductivity of industrial Cu–0.5%Cr alloy processed by severe plastic deformationWei, Kun Xia / Wei, Wei / Wang, Fei et al. | 2010
- 1485
-
Effect of magnesium carbonate on microstructure and rolling behaviors of AZ31 alloyWang, Ling / Kim, Young Min / Lee, JeHyun et al. | 2010
- 1491
-
Thermal stability of nanocrystalline structure in niobium processed by high pressure torsion at cryogenic temperaturesPopov, V.V. / Popova, E.N. / Stolbovskiy, A.V. et al. | 2010
- 1497
-
Study on laser welding–brazing of zinc coated steel to aluminum alloy with a zinc based fillerDharmendra, C. / Rao, K.P. / Wilden, J. et al. | 2010
- 1504
-
Effect of solution temperature on aging behavior and properties of SiCp/Al–Cu–Mg compositesJin, P. / Xiao, B.L. / Wang, Q.Z. et al. | 2010
- 1512
-
Room-temperature ductility of Ti–6Al–4V alloy with α′ martensite microstructureMatsumoto, Hiroaki / Yoneda, Hiroshi / Sato, Kazuhisa et al. | 2010
- 1512
-
Room-temperature ductility of Ti-6Al-4V alloy with a' martensite microstructureMatsumoto, H. / Yoneda, H. / Sato, K. et al. | 2011
- 1521
-
Grain refinement by cold deformation and recrystallization of bainite and acicular ferrite structures of C–Mn steelsHossein Nedjad, S. / Zahedi Moghaddam, Y. / Mamdouh Vazirabadi, A. et al. | 2010
- 1527
-
The effect of typical flight temperatures on the fatigue behaviour of Al 7075-T6 clamped platesOskouei, R.H. / Ibrahim, R.N. et al. | 2010
- 1534
-
Effects of different C contents on the microstructure, tensile properties and stress-rupture properties of IN792 alloyYang, Jinxia / Zheng, Qi / Ji, Manqing et al. | 2010
- 1540
-
Influence of orientation on the size effect in bcc pillars with different critical temperaturesSchneider, A.S. / Frick, C.P. / Clark, B.G. et al. | 2010
- 1548
-
Hot deformation and processing map of 2519A aluminum alloyLi, H.Z. / Wang, H.J. / Liang, X.P. et al. | 2010
- 1553
-
Preparation and characterization of mechanical properties of carbon nanotube/45S5Bioglass composites for biologic applicationsJia, Zhizhong / Zhang, Jing / Jia, Chengchang et al. | 2010
- 1558
-
The kinetics and energetics of dislocation mediated de-twinning in nano-twinned face-centered cubic metalsWei, Yujie et al. | 2010
- 1567
-
Static and dynamic compressive properties of mica/polypropylene compositesOmar, Mohd Firdaus / Akil, Hazizan Md / Ahmad, Zainal Arifin et al. | 2010
- 1577
-
Fatigue damage mechanisms in short fiber reinforced PBT+PET GF30Klimkeit, B. / Castagnet, S. / Nadot, Y. et al. | 2010
- 1589
-
Effect of isothermal aging on the microstructure and properties of as-cast Mg–Gd–Y–Zr alloyLiang, Shuquan / Guan, Dikai / Tan, Xiaoping et al. | 2010
- 1596
-
Mechanical properties and oxidation resistance of α-alumina/multi-walled carbon nanotube composite ceramicsBi, Song / Hou, Genliang / Su, Xunjia et al. | 2010
- 1596
-
Mechanical properties and oxidation resistance of a-alumina/multi-walled carbon nanotube composite ceramicsBi, S. / Hou, G. / Su, X. et al. | 2011
- 1602
-
Fatigue crack growth behavior of titanium foams for medical applicationsKashef, Sadaf / Asgari, Alireza / Hilditch, Timothy B. et al. | 2010
- 1608
-
In situ analysis of hydrogen behaviour in stainless steels by high energy synchrotron radiationDabah, E. / Kannengiesser, Th. / Eliezer, D. et al. | 2010
- 1615
-
Analysis on fatigue property of microshot peened railway axle steelZhang, J.W. / Lu, L.T. / Shiozawa, K. et al. | 2010
- 1623
-
Effect of La addition on glass-forming ability and stability of mechanically alloyed Zr–Ni amorphous alloysWang, Yan / Wang, Jingfu / Li, Cancan et al. | 2010
- 1628
-
Study of rapid grain boundary migration in a nanocrystalline Ni thin filmKacher, Josh / Robertson, I.M. / Nowell, Matt et al. | 2010
- 1636
-
Assessment of tearing resistance of ductile metals: Using a new concept of tearing toughnessLi, C.H. / Duan, Q.Q. / Zhang, Z.F. et al. | 2010
- 1641
-
Hot deformation behavior of Cu–8.0Ni–1.8Si–0.15Mg alloyZhang, L. / Li, Z. / Lei, Q. et al. | 2010
- 1648
-
Strength–hardness statistical correlation in API X65 steelHashemi, S.H. et al. | 2010
- 1656
-
Influence of organic modification on the structure and properties of polyurethane/sepiolite nanocompositesChen, Hongxiang / Zeng, Danlin / Xiao, Xiaoqin et al. | 2010
- 1662
-
Compressive response of Al-foams produced via a powder sintering process based on a leachable space-holder materialMichailidis, N. / Stergioudi, F. / Tsouknidas, A. et al. | 2010
- 1668
-
Microstructure and creep behavior of the rare-earth doped Mg–6Zn–3Cu cast alloyGolmakaniyoon, S. / Mahmudi, R. et al. | 2010
- 1678
-
Recrystallization and texture evolution of Mg–3%Al–1%Zn–(0.4–0.8)%Sr alloys during extrusionSadeghi, Alireza / Pekguleryuz, Mihriban et al. | 2010
- 1686
-
Role of alloying elements in microstructure evolution and alloying elements behaviour during sintering of a near-β titanium alloyCarman, A. / Zhang, L.C. / Ivasishin, O.M. et al. | 2010
- 1686
-
Role of alloying elements in microstructure evolution and alloying elements behaviour during sintering of a near-b titanium alloyCarman, A. / Zhang, L. C. / Ivasishin, O. M. et al. | 2011
- 1694
-
Theory for the failure stress of a quasi-equilibrium, brittle polycrystal with a small void fractionFarr, Robert S. / Luque, Aitor / Hoddle, Andrew et al. | 2010
- 1702
-
Influence of scandium on an Al–2% Si alloy processed by high-pressure torsionRajinikanth, V. / Venkateswarlu, K. / Sen, Mani Kuntal et al. | 2010
- 1707
-
Isothermal forging of AZ91 reinforced with 10vol.% silicon carbon particlesDeng, K.K. / Wang, X.J. / Gan, W.M. et al. | 2010
- 1713
-
Effects of aging in high temperature helium environments on room temperature tensile properties of nickel-base superalloysKim, Daejong / Sah, Injin / Jang, Changheui et al. | 2010
- 1721
-
Effects of Gd addition on as-cast microstructure and mechanical properties of Mg–3Sn–2Ca magnesium alloyYang, Mingbo / Zhu, Yi / Liang, Xiaofeng et al. | 2010
- 1727
-
Strain rate effect on the tensile behaviour of textile-reinforced concrete under static and dynamic loadingSilva, Flávio de Andrade / Butler, Marko / Mechtcherine, Viktor et al. | 2010
- 1735
-
Effect of cryogenic treatment on WC–Co cemented carbidesYong, Jiang / Ding, Chen et al. | 2010
- 1740
-
Investigation of mechanical properties of Cu/SiC composite fabricated by FSP: Effect of SiC particles’ size and volume fractionBarmouz, M. / Asadi, P. / Besharati Givi, M.K. et al. | 2010
- 1750
-
Fabrication of high strength Cu–NbC composite conductor by high pressure torsionLong, B.D. / Umemoto, M. / Todaka, Y. et al. | 2010
- 1757
-
Characterization of hot deformation behavior of as-cast TC21 titanium alloy using processing mapZhu, Yanchun / Zeng, Weidong / Feng, Fei et al. | 2010
- 1764
-
Assessment of poly(ɛ-caprolactone)/poly(3-hydroxybutyrate-co-3-hydroxyvalerate) blends processed by solvent casting and electrospinningDel Gaudio, Costantino / Ercolani, Enrico / Nanni, Francesca et al. | 2010
- 1773
-
Thermally activated relaxation behaviour of shot-peened tool steels for cutting tool body applicationsMedvedeva, Anna / Bergström, Jens / Gunnarsson, Staffan et al. | 2010
- 1780
-
Hot deformation behavior and microstructural evolution of homogenized 7050 aluminum alloy during compression at elevated temperatureDeng, Ying / Yin, Zhimin / Huang, Jiwu et al. | 2010
- 1787
-
Effect of mushy state rolling on age-hardening and tensile behavior of Al–4.5Cu alloy and in situ Al–4.5Cu–5TiB2 compositeSiddhalingeshwar, I.G. / Herbert, M.A. / Chakraborty, M. et al. | 2010
- 1799
-
Mechanical characterization of hyperelastic polydimethylsiloxane by simple shear testNunes, L.C.S. et al. | 2010
- 1805
-
Influence of ZrC content on the elevated temperature tensile properties of ZrCp/W compositesWang, Yujin / Peng, Hua-Xin / Zhou, Yu et al. | 2010
- 1812
-
Hot deformation behavior of Ti–5.0Al–2.40Sn–2.02Zr–3.86Mo–3.91Cr alloy with an initial lamellar microstructure in the α+β phase fieldNing, Yongquan / Fu, M.W. / Hou, Hongyu et al. | 2010
- 1812
-
Hot deformation behavior of Ti-5.0Al-2.40Sn-2.02Zr-3.86Mo-3.91Cr alloy with an initial lamellar microstructure in the a+b phase fieldNing, Y. / Fu, M. W. / Hou, H. et al. | 2011
- 1819
-
Hot ductility behaviour of high-Mn TWIP steelsHamada, A.S. / Karjalainen, L.P. et al. | 2010
- 1828
-
Microstructural stability of Cu processed by different routes of severe plastic deformationGubicza, J. / Dobatkin, S.V. / Khosravi, E. et al. | 2010
- 1833
-
Development of α-phase morphologies during low temperature isothermal heat treatment of a Ti–5Al–5Mo–5V–3Cr alloyDehghan-Manshadi, Ali / Dippenaar, Rian J. et al. | 2010
- 1833
-
Development of a-phase morphologies during low temperature isothermal heat treatment of a Ti-5Al-5Mo-5V-3Cr alloyDehghan-Manshadi, A. / Dippenaar, R. J. et al. | 2011
- 1840
-
Laves phase precipitation and its transformation kinetics in the ferritic stainless steel type AISI 441Sello, M.P. / Stumpf, W.E. et al. | 2010
- 1848
-
Cyclic creep and recovery behavior of Nextel(TM)720/alumina ceramic composite at 1200^oCRuggles-Wrenn, M. B. / Whiting, B. A. et al. | 2011
- 1848
-
Cyclic creep and recovery behavior of Nextel™720/alumina ceramic composite at 1200°CRuggles-Wrenn, M.B. / Whiting, B.A. et al. | 2010
- 1857
-
Structure–property relationship in impact modified nanoclay-reinforced polypropyleneYang, Y. / Chen, J. / Yuan, Q. et al. | 2010
- 1864
-
Effects of short-time heat treatment and subsequent chemical surface treatment on the mechanical properties, low-cycle fatigue behavior and corrosion resistance of a Ni–Ti (50.9at.% Ni) biomedical alloy wire used for the manufacture of stentsVojtěch, D. / Voděrová, M. / Kubásek, J. et al. | 2010
- 1877
-
Underlying mechanism of dual hysteresis in NiMnGa single crystalsHamilton, R.F. / Dilibal, S. / Sehitoglu, H. et al. | 2010
- 1882
-
Effects of hydrogen and surface dislocation on active dissolution of deformed 304 austenitic stainless steel in acid chloride solutionHuang, Yuhui / Xuan, Fu-Zhen / Tu, Shan-Tung et al. | 2010
- 1889
-
The effect of nitrogen on the formation of phase reversion-induced nanograined/ultrafine-grained structure and mechanical behavior of a Cr–Ni–N steelMisra, R.D.K. / Zhang, Z. / Venkatasurya, P.K.C. et al. | 2010
- 1897
-
Ductile fine-grained Ti–O-based composites with ultrahigh compressive specific strength fabricated by spark plasma sinteringLi, Y.Y. / Yang, C. / Wei, T. et al. | 2010
- 1901
-
Spark plasma sintering of amorphous-crystalline laminated compositesHarimkar, Sandip P. / Borkar, Tushar / Singh, Ashish et al. | 2010
- 1906
-
New deformation phenomenon for micro-formability of polycrystalline materialsLam, Yee Cheong / Tran, Nhat Khoa / Yue, Chee Yoon et al. | 2010
- 1910
-
Author Index| 2010
- 1915
-
Subject Index| 2010
- CO2
-
Editorial Board| 2010