Low-enthalpy geothermal systems for air conditioning: a case study in the Mediterranean climate (English)
- New search for: Frau, Caterina
- New search for: Maggio, Enrico
- New search for: Poggi, Francesca
- New search for: Melis, Emanuela
- New search for: Floris, Francesco
- New search for: Orrù, Pier Francesco
- New search for: Frau, Caterina
- New search for: Maggio, Enrico
- New search for: Poggi, Francesca
- New search for: Melis, Emanuela
- New search for: Floris, Francesco
- New search for: Orrù, Pier Francesco
In:
Energy procedia
;
148
;
527-534
;
2018
-
ISSN:
- Article (Journal) / Print
-
Title:Low-enthalpy geothermal systems for air conditioning: a case study in the Mediterranean climate
-
Contributors:Frau, Caterina ( author ) / Maggio, Enrico ( author ) / Poggi, Francesca ( author ) / Melis, Emanuela ( author ) / Floris, Francesco ( author ) / Orrù, Pier Francesco ( author )
-
Published in:Energy procedia ; 148 ; 527-534
-
Publisher:
- New search for: Elsevier Science B.V., Amsterdam
-
Publication date:2018-01-01
-
Size:8 pages
-
ISSN:
-
Type of media:Article (Journal)
-
Type of material:Print
-
Language:English
- New search for: 333.7905
- Further information on Dewey Decimal Classification
-
Classification:
DDC: 333.7905 -
Source:
© Metadata Copyright the British Library Board and other contributors. All rights reserved.
Table of contents – Volume 148
The tables of contents are generated automatically and are based on the data records of the individual contributions available in the index of the TIB portal. The display of the Tables of Contents may therefore be incomplete.
- 1
-
Editorial preface – ATI 2018 – Energy ProcediaDesideri, Umberto / Franco, Alessandro / di Marco, Paolo / Fantozzi, Fabio / Antonelli, Marco / Ferrari, Lorenzo et al. | 2018
- 2
-
A vector optimization methodology applied to thermodynamic model calibration of a micro gas turbine CHP plantGimelli, Alfredo / Sannino, Raniero et al. | 2018
- 10
-
Diagnostic method by using vibration analysis for pump fault detectionSiano, D. / Panza, M.A. et al. | 2018
- 18
-
Dual-fuel injection fundamentals: experimental – numerical analysis into a constant-volume vesselBartolucci, Lorenzo / Carlucci, Antonio P. / Cordiner, Stefano / Ficarella, Antonio / Laforgia, Domenico / Mulone, Vincenzo / Rocco, Vittorio / Strafella, Luciano et al. | 2018
- 26
-
Modelling and energy comparison of system layouts for a hydraulic excavatorBedotti, Andrea / Pastori, Mirko / Casoli, Paolo et al. | 2018
- 34
-
Bioenergy recovery from waste: comparison of different treatment scenarios by LCAAlbini, Elena / Bacchi, Donata / Ferrara, Giovanni / Francini, Giovanni / Galoppi, Giovanni / Lombardi, Lidia / Pecorini, Isabella / Susini, Caterina et al. | 2018
- 42
-
Thermo-economic analysis of a natural gas liquefaction plantAdolfo, Dominique / Carcasci, Carlo / Falchetti, Claudio / Lubello, Pietro et al. | 2018
- 50
-
Basics on Water Injection Process for Gasoline EnginesFalfari, Stefania / Bianchi, Gian Marco / Cazzoli, Giulio / Forte, Claudio / Negro, Sergio et al. | 2018
- 58
-
Aeroelastic Investigation of a Transonic Compressor Rotor with Multi-Row EffectsBarreca, Pietro / Pinelli, Lorenzo / Vanti, Federico / Arnone, Andrea et al. | 2018
- 66
-
Thermodynamic simulation of a small-scale organic Rankine cycle testing facility using R245faMoradi, Ramin / Tascioni, Roberto / Habib, Emanuele / Cioccolanti, Luca / Villarini, Mauro / Bocci, Enrico et al. | 2018
- 74
-
Unsteady Methods Applied to a Transonic Aeronautical Gas Turbine StageAmato, Giorgio / Giovannini, Matteo / Marconcini, Michele / Arnone, Andrea et al. | 2018
- 82
-
Techno-economic analysis of in-situ production by electrolysis, biomass gasification and delivery systems for Hydrogen Refuelling Stations: Rome case studyAndrea, Monforti Ferrario / Sara, Rajabi Hamedani / Luca, Del Zotto / Giovanni, Santori Simone / Enrico, Bocci et al. | 2018
- 90
-
Numerical modelling and experimental validation of jet impingement technology for professional appliancesTiberi, Emidio / Furlanetto, Riccardo / Simonato, Michele / Piller, Marzio et al. | 2018
- 98
-
Numerical Study of Flutter Stabilization in Low Pressure Turbine Rotor with Intentional MistuningBiagiotti, Sara / Pinelli, Lorenzo / Poli, Francesco / Vanti, Federico / Pacciani, Roberto et al. | 2018
- 106
-
Development of an on-line energy management strategy for hybrid electric vehicleDaniela, Tufano / Vincenzo, De Bellis / Enrica, Malfi et al. | 2018
- 114
-
Comparison of 0D and 3D Hydraulic Models for Axial Piston PumpsCorvaglia, Alessandro / Rundo, Massimo et al. | 2018
- 122
-
Optimization of medium temperature direct steam generation solar plantIodice, Paolo / Langella, Giuseppe / Amoresano, Amedeo / Dona, Raffaella Di et al. | 2018
- 130
-
Validation of an URANS approach for direct and indirect noise assessment in a high pressure turbine stageBurberi, Corrado / Ghignoni, Erika / Pinelli, Lorenzo / Marconcini, Michele et al. | 2018
- 138
-
Durability of technologies in the keeping of ZEB's performancesDanza, Ludovico / Belussi, Lorenzo / Guazzi, Giulia / Meroni, Italo / Salamone, Francesco et al. | 2018
- 146
-
Application of artificial neural networks to the simulation of a Dedicated Outdoor Air System (DOAS)Pittarello, Marco / Scarpa, Massimiliano / Schibuola, Luigi / Tambani, Chiara et al. | 2018
- 154
-
Development of a chemical-kinetic database for the laminar flame speed under GDI and water injection engine conditionsCazzoli, Giulio / Falfari, Stefania / Bianchi, Gian Marco / Forte, Claudio et al. | 2018
- 162
-
Environmental evaluation of Waste to Energy plant coupled with concentrated solar energyMendecka, Barbara / Lombardi, Lidia et al. | 2018
- 170
-
Effects of viscosity on the performance of Hydraulic Power Recovery Turbines (HPRTs) by the means of Computational Fluid Dynamics (CFD) simulationsRossi, Mosè / Comodi, Gabriele / Piacente, Nicola / Renzi, Massimiliano et al. | 2018
- 178
-
Fluid-dynamic analysis of an in-line water piston pumpBorghi, Massimo / Zardin, Barbara / Materi, Sergio / Argentino, Pierluigi et al. | 2018
- 186
-
CO2 capture in cement plants by "Tail-End" Calcium Looping processLena, E. De / Spinelli, M. / Romano, M.C. et al. | 2018
- 194
-
Investigation of a pressure compensated vane pumpFornarelli, F. / Lippolis, A. / Oresta, P. / Posa, A. et al. | 2018
- 202
-
On the Wind Turbine Wake Mathematical ModellingBrusca, Sebastian / Lanzafame, Rosario / Famoso, Fabio / Galvagno, Antonio / Messina, Michele / Mauro, Stefano / Prestipino, Mauro et al. | 2018
- 210
-
Implementation of the "Virtual Camber" Transformation into the Open Source Software QBlade: Validation and AssessmentBianchini, Alessandro / Marten, David / Tonini, Andrea / Balduzzi, Francesco / Nayeri, Christian Navid / Ferrara, Giovanni / Paschereit, Christian Oliver et al. | 2018
- 218
-
Secondary flow and radial mixing modelling for CFD-based Through-Flow methods: an axial turbine applicationRicci, Martina / Pacciani, Roberto / Marconcini, Michele / Arnone, Andrea et al. | 2018
- 226
-
Study of a Pump-as-Turbine (PaT) speed control for a Water Distribution Network (WDN) in South-Tyrol subjected to high variable water flow ratesAlberizzi, Jacopo C. / Renzi, Massimiliano / Nigro, Alessandra / Rossi, Mosè et al. | 2018
- 234
-
Comparison between experimental and numerical results of a packed-bed thermal energy storage system in continuous operationCascetta, Mario / Serra, Fabio / Cau, Giorgio / Puddu, Pierpaolo et al. | 2018
- 242
-
A control system for preventing cavitation of centrifugal pumpsCucit, Valentino / Burlon, Fabio / Fenu, Gianfranco / Furlanetto, Riccardo / Pellegrino, Felice Andrea / Simonato, Michele et al. | 2018
- 250
-
Impact of Stretch and Heat Loss on Flame Stabilization in a Lean Premixed Flame approaching Blow-offNassini, Pier Carlo / Pampaloni, Daniele / Andreini, Antonio et al. | 2018
- 258
-
Battery state of charge management strategies for a real-time controller of a Plug-in Hybrid Electric VehicleCaramia, Gabriele / Cavina, Nicolò / Caggiano, Michele / Patassa, Stefano / Moro, Davide et al. | 2018
- 266
-
Dynamic modelling of the swash plate of a hydraulic axial piston pump for condition monitoring applicationsBedotti, Andrea / Pastori, Mirko / Scolari, Fabio / Casoli, Paolo et al. | 2018
- 274
-
Numerical and experimental investigation for the design of a directional spool valveFrosina, Emma / Marinaro, Gianluca / Senatore, Adolfo / Pavanetto, Michele et al. | 2018
- 281
-
Refugee camps as an opportunity for promoting alternative development strategies based on carbon creditsManni, Mattia / Ragnacci, Flavia / Filippucci, Marco / Coccia, Valentina / Bianconi, Fabio / Cotana, Franco / Petrozzi, Alessandro et al. | 2018
- 289
-
Energy consumption of a last generation full hybrid vehicle compared with a conventional vehicle in real drive conditionsOrecchini, F. / Santiangeli, A. / Zuccari, F. / Ortenzi, F. / Genovese, A. / Spazzafumo, G. / Nardone, L. et al. | 2018
- 297
-
An hybrid approach for primary energy balance of an existing waste-to-energy plantMaria, Francesco Di / Sisani, Federico / Lasagni, Marzio / El-Hoz, Mervat et al. | 2018
- 304
-
Development of a simple tool able to study flight cycles gas turbine performance and emissionsGamannossi, Andrea / Adolfo, Dominique / Poggiali, Matteo / Carcasci, Carlo et al. | 2018
- 312
-
Energetic and exergetic analysis of an innovative plant for the production of electricity and substitute natural gasBargiacchi, Eleonora / Frigo, Stefano / Spazzafumo, Giuseppe et al. | 2018
- 320
-
The effect of glazing on nZEB performanceMurano, Giovanni / Primo, Elisa / Corrado, Vincenzo et al. | 2018
- 328
-
Transient Simulation of a Solar Cooling System for an Agro-Industrial ApplicationCascetta, Furio / Cirillo, Luca / Nardini, Sergio / Vigna, Silvio et al. | 2018
- 336
-
Experimental and Numerical Analyses of a Spark-Ignition Engine Firing with N-Butanol-Gasoline Blends at High Load OperationGalloni, E. / Fontana, G. / Scala, F. et al. | 2018
- 344
-
Reduction of the experimental effort in engine calibration by using neural networks and 1D engine simulationNola, Francesco de / Giardiello, Giovanni / Gimelli, Alfredo / Molteni, Andrea / Muccillo, Massimiliano / Picariello, Roberto / Tornese, Diego et al. | 2018
- 352
-
A Model-in-the-Loop application of a Predictive Controller to a District Heating systemCadau, Nora / Lorenzi, Andrea De / Gambarotta, Agostino / Morini, Mirko / Saletti, Costanza et al. | 2018
- 360
-
A ring-vortex free-wake model for uniformly loaded propellers. Part I-Model description.Bontempo, Rodolfo / Manna, Marcello et al. | 2018
- 368
-
A ring-vortex free-wake model for uniformly loaded propellers. Part II - Solution procedure and analysis of the resultsBontempo, Rodolfo / Manna, Marcello et al. | 2018
- 376
-
Numerical simulation of a swirl stabilized methane-air flame with an automatic meshing CFD solverPalanti, Lorenzo / Pampaloni, Daniele / Andreini, Antonio / Facchini, Bruno et al. | 2018
- 384
-
Performance and operation of micro-ORC energy system using geothermal heat sourceBianchi, M. / Branchini, L. / Pascale, A. De / Melino, F. / Ottaviano, S. / Peretto, A. / Torricelli, N / Zampieri, G. et al. | 2018
- 392
-
Influence of piston shape and injector geometry on combustion and emission characteristics of syngas in direct-injection spark-ignition engineFiore, Matilde / Viggiano, Annarita / Fanelli, Emanuele / Braccio, Giacobbe / Magi, Vinicio et al. | 2018
- 400
-
A model for filter diagnostics in a syngas-fed CHP plantGambarotta, Agostino / Manganelli, Matteo / Morini, Mirko et al. | 2018
- 408
-
Performance prediction model of multistage centrifugal Pumps used as Turbines with Two-Phase FlowStefanizzi, M. / Torresi, M. / Fornarelli, F. / Fortunato, B. / Camporeale, S.M. et al. | 2018
- 416
-
Investigation of a passive control system for limiting cavitation inside turbomachinery under different operating conditionsCapurso, T. / Menchise, G. / Caramia, G. / Camporeale, S.M. / Fortunato, B. / Torresi, M. et al. | 2018
- 424
-
Development of a pressure-based technique to control IMEP and MFB50 in a 3.0L diesel engineFinesso, Roberto / Marello, Omar / Spessa, Ezio et al. | 2018
- 431
-
Water hyacinth biomass: chemical and thermal pre-treatment for energetic utilization in anaerobic digestion processCarlini, M. / Castellucci, S. / Mennuni, A. et al. | 2018
- 439
-
I-REXFO LIFE: an innovative business model to reduce food wasteLiberti, F. / Pistolesi, V. / Massoli, S. / Bartocci, P. / Bidini, G. / Fantozzi, F. et al. | 2018
- 447
-
Techno-economic sizing of a battery energy storage coupled to a wind farm: an Italian case studyFrate, Guido Francesco / Carro, Paula Peña / Ferrari, Lorenzo / Desideri, Umberto et al. | 2018
- 455
-
Impact of consumption profile discontinuities on the feasibility of a PV plantPasini, G. / Ferrari, L. / Desideri, U. / Reboa, R. / Ghirlanda, C. et al. | 2018
- 463
-
Analysis and Simulation of Non-Flamelet Turbulent Combustion in a Research Optical EngineIacovano, Clara / d'Adamo, Alessandro / Cantore, Giuseppe et al. | 2018
- 471
-
Heat transfer enhancement induced by the geometry of a LHTES deviceFornarelli, F. / Valenzano, M. / Fortunato, B. / Camporeale, S.M. / Torresi, M. / Oresta, P. et al. | 2018
- 479
-
Estimation of the performance of a BIPV façade in working conditions through real monitoring and simulationBellazzi, Alice / Belussi, Lorenzo / Meroni, Italo et al. | 2018
- 487
-
Full simulation of a piezoelectric double nozzle flapper pilot valve coupled with a main stage spool valveTamburrano, Paolo / Amirante, Riccardo / Distaso, Elia / Plummer, Andrew R. et al. | 2018
- 495
-
Preliminary design of a hybrid electric powertrain for a earthmoving machineDonateo, Teresa / Nicolazzo, Asclepio et al. | 2018
- 503
-
A Lumped Parameter Model for the Analysis of Dynamic Effects in Wells TurbinesVirdis, Irene / Ghisu, Tiziano / Cambuli, Francesco / Puddu, Pierpaolo et al. | 2018
- 511
-
Numerical Study of a Wells Turbine with Variable Pitch Rotor BladesLicheri, Fabio / Climan, Antonello / Puddu, Pierpaolo / Cambuli, Francesco / Ghisu, Tiziano et al. | 2018
- 519
-
Validation of a NOx estimation methodology based on the analysis of in-cylinder pressure traceCarra, Filippo / Ponti, Fabrizio / Ravaglioli, Vittorio et al. | 2018
- 527
-
Low-enthalpy geothermal systems for air conditioning: a case study in the Mediterranean climateFrau, Caterina / Maggio, Enrico / Poggi, Francesca / Melis, Emanuela / Floris, Francesco / Orrù, Pier Francesco et al. | 2018
- 535
-
Design of an SOFC/SOE experimental station: planning of simulation testsFragiacomo, Petronilla / Corigliano, Orlando / De Lorenzo, Giuseppe et al. | 2018
- 543
-
Design of an SOFC/SOE station: experimental test campaignsFragiacomo, Petronilla / De Lorenzo, Giuseppe / Corigliano, Orlando et al. | 2018
- 551
-
CFD optimization of CPC solar collectorsFrancesconi, M. / Caposciutti, G. / Antonelli, M. et al. | 2018
- 559
-
Thermal-electric decoupling approach for a medium-size CHP system: electric storage vs thermal storage, economic comparison with different constraintsCauchi, Giovanni / Magnani, Sandro / Danti, Piero et al. | 2018
- 567
-
NOx emissions for oxy-mild combustion of pulverized coal in high temperature pre-heated oxygen.Perrone, D. / Castiglione, T. / Morrone, P. / Barbarelli, S. / Amelio, M. et al. | 2018
- 575
-
Analysis of a Trigeneration Plant under Transient Operating ConditionsPerrone, D. / Morrone, P. / Castiglione, T. / Algieri, A. / Bova, S. et al. | 2018
- 583
-
Comparison between two different efficiency improvement approaches for an obsolete small-size multi-generation plantDanti, Piero / Magnani, Sandro / Cauchi, Giovanni et al. | 2018
- 591
-
Numerical analyses of a high pressure sooting flame with multiphysics approachPaccati, Simone / Bertini, Davide / Puggelli, Stefano / Mazzei, Lorenzo / Andreini, Antonio / Facchini, Bruno et al. | 2018
- 599
-
Integration of oxygen transport membranes in glass melting furnacesGiuffrida, Antonio / Chiesa, Paolo / Drago, Francesca / Mastropasqua, Luca et al. | 2018
- 607
-
Reducing pressure valve with real gases: an integrated approach for the designCasari, Nicola / Pinelli, Michele / Suman, Alessio / Pavanelli, Giacomo et al. | 2018
- 615
-
Investigation of the Load-Following Capability of CSP PlantsBrumana, Giovanni / Franchini, Giuseppe / Ghirardi, Elisa et al. | 2018
- 623
-
"BIM AND PLANT SYSTEMS: A SPECIFIC ASSESSMENT"Marini, Martino / Mastino, Costantino C. / Baccoli, Roberto / Frattolillo, Andrea et al. | 2018
- 631
-
Impact of the laminar flame speed correlation on the results of a quasi-dimensional combustion model for Spark-Ignition engineTeodosio, L. / Bozza, F. / Tufano, D. / Giannattasio, P. / Distaso, E. / Amirante, R. et al. | 2018
- 639
-
Energy performance and profitability of biomass boilers in commercial sector: the case study of Sainsbury's stores in the UKSorrentino, Arianna / Pantaleo, Antonio M. / Markides, Christos N. / Braccio, Giacobbe / Fanelli, Emanuele / Camporeale, Sergio M et al. | 2018
- 647
-
Natural gas recovery from hydrate compounds using CO2 replacement strategies: experimental study on thermal stimulation.Maria, Gambelli Alberto et al. | 2018
- 655
-
Biogas upgrading and liquefaction in an anaerobic digester plantBaccioli, A. / Ferrari, L. / Marchionni, A. / Desideri, U. et al. | 2018
- 663
-
Investigation of Lubricant Oil influence on Ignition of Gasoline-like Fuels by a Detailed Reaction MechanismDistaso, E. / Amirante, R. / Calò, G. / Palma, P. De / Tamburrano, P. / Reitz, R.D. et al. | 2018
- 671
-
Steady-state Characterization of Particle Number Emissions from a Heavy-Duty Euro VI Engine Fueled with Compressed Natural GasDistaso, E. / Amirante, R. / Tamburrano, P. / Reitz, R.D. et al. | 2018
- 679
-
Experimental results of the optimized management of an EMS-equipped small-size prosumerMagnani, Sandro / Danti, Piero / Cauchi, Giovanni et al. | 2018
- 687
-
Effect of the Regenerator Efficiency on the Performance of a Micro Gas Turbine Fed with Alternative FuelsNicolosi, Francesco F. / Renzi, Massimiliano et al. | 2018
- 695
-
An indirect in-cylinder pressure measurement technique based on the estimation of the mechanical strength acting on an engine head screw: development and assessmentFiorini, Niccolò / Romani, Luca / Bellissima, Alessandro / Vichi, Giovanni / Bianchini, Alessandro / Ferrara, Giovanni et al. | 2018
- 703
-
CFD analysis of a swirl stabilized coal combustion burnerRago, G.D. / Rossiello, G. / Dadduzio, R. / Giani, T. / Saponaro, A. / Cesareo, F. / Lacerenza, M. / Fornarelli, F. / Caramia, G. / Fortunato, B. et al. | 2018
- 712
-
Dynamic simulation of the temperature inlet turbine control system for an unfired micro gas turbine in a concentrating solar tower.Amelio, M. / Pèrez, M. Silva / Ferraro, V. / Rovense, F. / Bova, S. et al. | 2018
- 720
-
Heat exchanger design and optimization by using genetic algorithm for externally fired micro-turbineFanelli, E. / Lovaglio, N. / Cornacchia, G. / Braccio, G. / Magi, V. et al. | 2018
- 728
-
Second generation bioethanol production from Arundo donax biomass: an optimization methodBrusca, Sebastian / Cosentino, Salvatore Luciano / Famoso, Fabio / Lanzafame, Rosario / Mauro, Stefano / Messina, Michele / Scandura, Pier Francesco et al. | 2018
- 736
-
Parameters identification for scroll expander semi-empirical model by using genetic algorithmFanelli, E. / Pinto, G. / Cornacchia, G. / Braccio, G. et al. | 2018
- 744
-
Enhanced Geothermal System with captured CO2Bonalumi, Davide et al. | 2018
- 751
-
Feasibility study of a CHP plant with steam turbine and biomass gasification for tissue paper productionFrigo, Stefano / Gabbrielli, Roberto / Linari, Luca et al. | 2018
- 758
-
Monitoring methodologies and tools for the Sustainable Energy Action Plans to support the Public AdministrationCinocca, Andrea / Santini, Fabrizio / Cipollone, Roberto et al. | 2018
- 766
-
Control-Oriented Engine Thermal ModelCorti, Enrico / Abbondanza, Marco / Ravaglioli, Vittorio / Taccioli, Michele et al. | 2018
- 774
-
Solar Thermal-Based ORC Power Plant for Micro Cogeneration – Performance Analysis and Control StrategyVittorini, Diego / Antonini, Alessio / Cipollone, Roberto / Carapellucci, Roberto / Villante, Carlo et al. | 2018
- 782
-
Numerical investigation on a Heat Exchanger in Aluminum FoamBuonomo, Bernardo / Pasqua, Anna di / Ercole, Davide / Manca, Oronzio et al. | 2018
- 790
-
Numerical investigation on laminar slot-jet impinging on a surface at uniform heat flux in a channel partially filled with a porous mediumBuonomo, Bernardo / Manca, Oronzio / Nappo, Sergio / Nardini, Sergio et al. | 2018
- 798
-
Application of IoT and Machine Learning techniques for the assessment of thermal comfort perception.Salamone, Francesco / Belussi, Lorenzo / Currò, Cristian / Danza, Ludovico / Ghellere, Matteo / Guazzi, Giulia / Lenzi, Bruno / Megale, Valentino / Meroni, Italo et al. | 2018
- 806
-
Variable speed drive (VSD) technology applied to HVAC systems for energy saving: an experimental investigationSchibuola, Luigi / Scarpa, Massimiliano / Tambani, Chiara et al. | 2018
- 814
-
Hybrid Solutions for Power Generation IndustryGiacchino, Alessandro / Repetto, Enrico / Gianotti, Alessio Giorgio et al. | 2018
- 822
-
Charge Air Subcooling in a Diesel Engine via Refrigeration Unit – Effects on the Turbocharger EquilibriumVittorini, Diego / Bartolomeo, Marco Di / Battista, Davide Di / Cipollone, Roberto et al. | 2018
- 830
-
Experimental and numerical characterization of a positive displacement vane expander with an auxiliary injection port for an ORC-based power unitFatigati, Fabio / Bartolomeo, Marco Di / Cipollone, Roberto et al. | 2018
- 838
-
Modeling viscous effects on boundary layer of rarefied gas flows inside micronozzles in the slip regime conditionGiorgi, Maria Grazia De / Fontanarosa, Donato / Ficarella, Antonio et al. | 2018
- 846
-
A short review of comparative energy, economic and environmental assessment of different biogas-based power generation technologiesnorouzi, Omid / Maria, Francesco Di / El-Hoz, Mervat et al. | 2018
- 852
-
CSP-PT gas plant using air as Heat Transfer Fluid with a packed-bed storage sectionCinocca, Andrea / Cipollone, Roberto / Carapellucci, Roberto / Iampieri, Vincenzo / Rivo, Mattia et al. | 2018
- 860
-
A diagnostics tool for aero-engines health monitoring using machine learning techniqueGiorgi, Maria Grazia De / Campilongo, Stefano / Ficarella, Antonio et al. | 2018
- 868
-
A review of the properties of recycled and waste materials for energy refurbishment of existing buildings towards the requirements of NZEBTallini, Alessandro / Cedola, Luca et al. | 2018
- 876
-
Vibration analysis to estimate turbocharger speed fluctuation in diesel enginesChiavola, Ornella / Palmieri, Fulvio / Recco, Erasmo et al. | 2018
- 884
-
Uncertainty Quantification in Hydrodynamic BearingsGriffini, Duccio / Salvadori, Simone / Carnevale, Mauro / Montomoli, Francesco et al. | 2018
- 892
-
An innovative multilayer wall composed of natural materials: experimental characterization of the thermal properties and comparison with other solutionsBuratti, Cinzia / Belloni, Elisa / Merli, Francesca / Zanella, Veronica / Robazza, Paolo / Cornaro, Cristina et al. | 2018
- 900
-
Innovative electrochromic devices: Energy savings and visual comfort effectsCannavale, Alessandro / Ayr, Ubaldo / Martellotta, Francesco et al. | 2018
- 908
-
Investigating the Fuel Type Influence on Diesel CR Pump PerformanceChiavola, Ornella / Palmieri, Fulvio et al. | 2018