-
3
-
Effects of Manufacturing Process on Surface States of Commercial Silicon Nitride Powders
-
11
-
The Evolution of Interfacial Sliding Stresses During Cyclic Push‐in Testing of C‐ and Bn‐Coated Hi‐Nicalon Fiber‐Reinforced CMCs
-
19
-
Techniques for Measuring Interfacial Recession in CFCC's and the Implications on Subcritical Crack Growth
-
27
-
Synthesis of Calcium Hexaluminate and Lanthanum Hexaluminate Fiber Coatings
-
39
-
Microstructure and High Temperature Mechanical Behavior of New Polymer Derived SiC Based Fibers
-
47
-
A New Method for Measuring Diameter Distribution Along Ceramic Fiber
-
55
-
Microstructure and Mechanical Properties of SiC Fiber “Hi‐Nicalon Type S” Reinforced SiC Composites
-
65
-
Fabrication and Mechanical Properties of New Improved Si‐M‐C‐(O) Tyranno Fiber
-
73
-
Polymer‐Derived SiC‐Based Fibers with High Tensile Strength and Improved Creep Resistance
-
87
-
Formation of Carbon Coatings on SiC Fibers by Selective Etching in Halogens and Supercritical Water
-
97
-
Self‐Reinforced Silicon Nitride Composite Containing Unidirectionally Oriented Silicon Nitride Whisker Seeds
-
105
-
Properties of Ceramics in the ZrB<sub>2</sub>/ZrC/SiC System Prepared by Reactive Processing
-
113
-
The Effect of a Transient Liquid Phase Addition on the α‐TOβ‐Silicon Nitride Transformation in Celsian‐Silicon Nitride Composites
-
121
-
The Effect of Processing on the Strength, Thermal up Shock Resistance, and Dielectric Constant of Nicalon‐Reinforced Zirconium Phosphate Composites
-
129
-
Compressive Creep Behavior of SiC Fiber‐Reinforced Mullite Matrix Composites
-
139
-
Submicrometer Al<sub>2</sub>O<sub>3</sub>/Ti(C, O, N) Composites for Tool Applications
-
147
-
Strength and Stability Studies on Mini‐Tow Ceramic Composites Made with Nitrided Nextel™ 312 Fibers and Silicon Oxycarbide
-
155
-
Vanadium/MgAl<sub>2</sub>O<sub>4</sub> Composites for Hostile Environment Applications ‐Part I: Processing
-
163
-
V/MgAl<sub>2</sub>O<sub>4</sub> Composites for Hostile Environment Applications ‐ Part II: Properties
-
171
-
Elevated‐Temperature, ‘Ultra’‐Fast Fracture Strength of Silicon Nitride Ceramics
-
181
-
Stress Rate Effects on the Mechanical Properties of CFCMCs as a Function of Microstructure
-
189
-
Mechanical Properties of Ce<sub>0.9</sub>Gd<sub>0.1</sub>O<sub>2‐x</sub> and Ce<sub>0.9</sub>Gd<sub>0.1</sub>O<sub>2‐x</sub> + Al<sub>2</sub>O<sub>3</sub> Composites
-
199
-
Specimen Size Effects on the Flexural Strength of CFCCs
-
211
-
Influence of Twist Angle on the Fracture Toughness of (0001) Twist Boundary of Alumina
-
221
-
Active/Inactive Fillers for Blackglas™ /Nextel™ 312 (BN) Composites
-
231
-
Compression‐Resin Transfer Molding of Particle‐Filled Ceramic‐Ceramic Composites
-
241
-
Room Temperature Tensile Behavior and Damage Accumulation of Hi‐Nicalon Reinforced Sic Matrix Composites
-
251
-
The Stress Dependence Damage Mechanism During Tensile Creep and Fatigue in a SiC/SiC Composite at 1400°C
-
259
-
Fabrication and Characterization of 3D Carbon Fiber Reinforced SiC Matrix Composites via Slurry and Pulse‐CVI Joint Process
-
267
-
Filler/Polycarbosilane Systems as CMC Matrix Precursors
-
275
-
Tensile and in Situ Fibre Properties of 3‐D SiC/SiC‐Based Composite Tested at Elevated Temperature in Vacuum and Air with and Without an Oxidation Protection System
-
283
-
New Type of SIC‐Sintered Fiber and its Composite Material
-
291
-
Automated Fabrication of Monolithic Ceramics and Ceramic Matrix Composites (CMCs) Using a Novel Rapid Prototyping Method
-
305
-
Mullite/Cordierite Laminates with β→α Cristobalite Transformation Weakened Interphases
-
317
-
High‐Temperature Performance and Retained Strength of an Oxide‐Oxide Continuous Fibre Ceramic Composite
-
327
-
Longitudinal and Transthickness Tensile Behavior of Several Oxide/Oxide Composites
-
341
-
Preliminary Assessment of the Thermomechanical Behavior of Tyrannohex Composites in Relation with the Evolution of the Microstructure
-
349
-
Fatigue Crack Growth Behavior in SiC Fiber Reinforced Zircon Composites
-
359
-
Crystallization of Lanthanum Hexaluminate from MOCVD Precursors
-
361
-
Elevated‐Temperature Slow Crack Growth and Room‐Temperature Properties of MoSi<sub>2</sub>‐50 vol % Si<sub>3</sub>N<sub>4</sub> Composites
-
373
-
Reactive Processing, Microstructure, and Mechanical Properties of Al<sub>2</sub>O<sub>3</sub>‐MoSi<sub>2</sub> Composites
-
381
-
Comparison of the Sintering Behavior of SHS and ARC Melted Ti<sub>5</sub>Si<sub>3</sub>
-
389
-
Viability and Degradation of Molybdenum Disilicide Materials in Molten Glass Environments
-
397
-
Combustion Synthesis of NbSi<sub>2</sub> and Nb(Si<sub>1‐x</sub>, Al<sub>x</sub>)<sub>2</sub>
-
405
-
Combustion Synthesis in the Mo‐Si‐Al Ternary System
-
413
-
Processing and Properties of Mo<sub>5</sub>Si<sub>3</sub> Single Crystals
-
421
-
Processing, Characterization and Mechanical Behavior of Mo<sub>5</sub>Si<sub>3</sub>C
-
429
-
High Temperature Electrical Resistivity and Oxidation Resistance of Mo‐Si‐B Prepared by Mechanical Alloying
-
437
-
Reassessment of the Mo‐Si‐Al Ternary Isotherm at 1400°C
-
447
-
Comparison of Sintering Behavior and Properties of Aluminide‐Bonded Ceramics
-
457
-
Steel‐Reinforced Plasma Ceramics ‐ A New Multilayer Design
-
467
-
Copper/Gallium Amalgam for Ceramic‐Metal Bonds
-
475
-
Creep Deformation Behavior of SiC Particulate Reinforced Aluminum Composite
-
485
-
Si‐C‐B Based Preceramic Polymer System: The Influence of Boron on Microstructural Evolution
-
493
-
Application of Raman Spectroscopy to the Determination of Crystallographic Orientation and Mechanical Strain in Translucent Alumina
-
501
-
Study of Grain Boundary Structure of Ceramics by Electron Backscattered Diffraction (EBSD) Analyses
-
509
-
Grain Boundaries, Oxidation, and Strength of Heat Treated SiC
-
517
-
Si<sub>3</sub>N<sub>4</sub> Materials Fabricated from Powders with Very High Fraction of α Phase
-
523
-
Intergranular Phase of Si<sub>3</sub>N<sub>4</sub> Hot‐Pressed with 6% Y<sub>2</sub>O<sub>3</sub>
-
533
-
Thermal Imaging and Air‐Coupled Ultrasound Characterization of a Continuous Fiber Ceramic Composite
-
541
-
Development on Standard Test Methods for Ceramic Matrix Composites
-
549
-
Investigation of the Reduction of NiAl<sub>2</sub>O<sub>4</sub> ‐ I: Neutron Diffraction Studies
-
557
-
Investigations of the Reduction of NiAl<sub>2</sub>O<sub>4</sub> ‐ II: X‐Ray Diffraction Studies
-
565
-
The New Astm Fracture Toughness of Advanced Ceramics Standard: PS 070‐97
-
579
-
Statistically Designed Experiments to Improve Coating Life
-
587
-
Back‐Face Strain as a Method for Monitoring Stable Crack Extension
-
595
-
Some Limitations in the Elevated‐Temperature, Constant Stress‐Rate Flexural Testing for Advanced Ceramics with Reference to the New, Ambient‐Temperature Test Standard Astm C 1368
-
607
-
Evaluation of Thermal Shock Damage in 2‐D Woven Nicalon™ ‐Al<sub>2</sub>O<sub>3</sub> Composite by NDE Techniques
-
615
-
Nondestructive Evaluation and Characterization of Damage and Repair for Continuous Fiber Ceramic Composite Panels
-
623
-
Non‐Destructive Real‐Time Failure Prediction using Electrical Resistance
-
631
-
Nondestructive Evaluation Techniques for Ceramic Matrix Composites
-
i
-
Frontmatter
