-
1
-
Integrated Seismic and Energy Retrofitting System Using Textile-Reinforced Mortars Combined with Thermal Insulation
-
2
-
Fast and Low Impact Retrofit Using Advanced Materials for a Diffused Seismic Risk Mitigation
-
3
-
FRP Confined Concrete: What, Why, and How?
-
4
-
Design of an FRP Cable-Stayed Pedestrian Bridge. Morphology, Technology and Required Performances
-
5
-
Strengthening and Repair with Advanced Materials and Hybrid Techniques for Increased Resilience of RC Structures with the Use of Pseudo-dynamic 3d Finite Element Analysis
-
6
-
An Experimental Study on Concavely Curved Soffit Reinforced Concrete Beams Externally Bonded with FRP
-
7
-
Concept and Preliminary Test of the Intelligent FRP Bridge Deck for the Vehicular Bridges
-
8
-
Finite Element Modeling and Statistical Analysis of Fire-Damaged Reinforced Concrete Columns Repaired Using Smart Materials and FRP Confinement
-
9
-
Flexural Performance of BFRP Bar Reinforced High-Strength Concrete Beam
-
10
-
Structural Re-use of FRP Composite Wind Turbine Blades as Power-Line Utility Poles and Towers
-
11
-
Maintenance and Structural Check of an All FRP Pultruded Construction
-
12
-
Experimental Study on Comparison of Cyclic Bond Behavior of Ribbed and Sand-Coated CFRP Bars in High Strength Concrete
-
13
-
Bond Behavior of Basalt Fiber-Reinforced Polymer Bars Embedded in Concrete Under Mono-tensile and Cyclic Loads
-
14
-
Evaluating the Bond Characteristics of Intermediate and Ultra-High Modulus CFRP Laminates Adhered to Steel
-
15
-
Experimental Study on Increase of Bonding Strength of FRP Reinforcement in Concrete
-
16
-
Fatigue Behavior of FRCM Strengthened RC Beams: State of the Art and Future Developments
-
17
-
Numerical Study of the Effective Lap-Splice Length of FRCM Composites
-
18
-
Generalized Method of Determining the Local Bond Slip Relationship of the Reinforcement Externally Bonded to Concrete
-
19
-
Bond Behavior of Steel Plates Externally Bonded on Concrete Elements
-
20
-
Bond Assessment of GFRP Bars Embedded in Fiber-Reinforced Eco-concrete
-
21
-
Use of Distributed Optical Fibre to Monitor the Crack Propagation of an Adhesively Bonded Joint During an ENF Test
-
22
-
Loss of Bond Action in FRP-Strengthened Structural Elements: Modeling
-
23
-
Bond Behaviour of GFRP Bars with Concrete at Normal and High Temperatures
-
24
-
Thermo-mechanical Bonding Behaviour of CFRP NSM System Using Cement-Based Adhesive
-
25
-
Influence of Elevated Temperatures on the Bond Between CFRP Strips and Concrete Using the NSM Technique – Definition of Local Bond <italic>vs.</italic> Slip Laws
-
26
-
Testing a GFRP-Reinforced Concrete Bridge Deck Using a New Rolling Load Simulator
-
27
-
Shear Response of BFRP-Reinforced Short Beams Using Fiber Reinforced Concrete
-
28
-
Structural Behavior of BFRCC Layered Deep Beams Reinforced with GFRP Headed-End Bars
-
29
-
Effect of Under-Stressing on the Fatigue Strength of RC Beams Rehabilitated with NSM CFRP Reinforcement
-
30
-
Thin Sandwich Elements Prestressed with CFRP Tendons
-
31
-
Experimental Monitoring of Long-Term Structural Behaviour and Prestress Losses of BFRP Pretensioned Beams Under Sustained Loading
-
32
-
Parametric Study of Slender Columns Retrofitted with NSM CFRP Rods
-
33
-
Numerical Investigation on the Shear Behavior of Reinforced Concrete Beams Strengthened with Textile Reinforced Mortar Jackets
-
34
-
Axial Load Performance of GFRP-Reinforced Hollow Concrete Columns
-
35
-
Unloading Behaviour and Analysis of GFRP Prestressed Concrete Beams
-
36
-
Numerical Investigation of a New Floor System with GFRP Stay-in-Place Forms and Embedded I-Beams
-
37
-
Shear Code Provisions Applied to the Prediction of FRP Strengthened Prestressed I-Girders
-
38
-
FRP Reinforcement to Retrofit Bridge Pier After Repair: Experimental Test Results
-
39
-
<bold>Combined Torsion, Flexure, and Axial Compression Applied to Concrete</bold>-<bold>Filled FRP Tubes</bold>
-
40
-
Segmental Hollow Concrete Filled FRP Tubes (CFFT) for Wind Turbine Towers
-
41
-
Experimental Behaviour of ±55° GFRP Filament Wound Tubes Under Uniaxial Tension and Compression
-
42
-
Flexural Performance of Post-tensioned Rectangular Concrete-Filled FRP Tubes (CFFT) Beams Using High and Normal Strength Concrete
-
43
-
Influence of Filler Properties on the Axial Behaviour of Pultruded FRP Tubes
-
44
-
Key Parameters in the Calculation of the Reinforcement of Rectangular Columns with FRP. Review of Design Guidelines and Comparison with Experimental Results
-
45
-
Compressive Behavior of Masonry Columns Confined with Multi-layer SRG Composite
-
46
-
Behaviour of Recycled Aggregate RC Columns Wrapped with CFRP Under Axial Compression
-
47
-
Axial Behaviour of Damaged Concrete Columns Repaired with Novel Prefabricate FRP Jacket
-
48
-
Implementation of GFRP-Reinforced Concrete Draft Code Provisions in Design Examples: What Works and What Doesn’t
-
49
-
Reliability Analysis of FRP-Concrete Joint with or Without Epoxy Interlocking Enhancement
-
50
-
A Progressive Failure Model for FRP Structures: Numerical and Experimental Analyses
-
51
-
Estimation of the Shear Strength of RC Members with Externally Bonded, Fully-Wrapped FRCM Composites
-
52
-
A Discussion of Differences Between Single-Lap Tests and Full-Scale Beam Tests in Terms of FRCM-Concrete Debonding
-
53
-
Maximum FRP Bar Diameter and Bar Spacing for Crack Control in Flexural Reinforced Concrete Members
-
54
-
Finite Element Modeling of Large Rupture Strain (LRS) FRP-Confined Concrete Columns
-
55
-
A 3D Plasticity Model for Concrete and Its Application to Concrete Under Non-uniform FRP Confinement
-
56
-
Design of a Replacement Fibre-reinforced Polymer Footbridge
-
57
-
Externally Bonded CFRP Strengthened RC Slabs, Four years of External Environment Exposure and Evaluation of the Load Carrying Capacity
-
58
-
Hygrothermal Ageing of Pultruded GFRP Profiles: Experimental Study and Prediction Models
-
59
-
Enhancement of Mechanical Properties of FRP Composites with Silica Nanoparticles
-
60
-
Durability and Lifetime Prediction of Flax Fiber Reinforced Polymer Composites
-
61
-
Three-Dimensional Characterization of Naturally Corroded Steel-Reinforced Concrete Using Computed Tomography
-
62
-
Characterisation of the Degradation Behaviour of a Loaded Vinyl Ester GFRP Bar in Alkaline Concrete Environment
-
63
-
Microscopic and Durability Evaluation of In-Situ Extracted Internal GFRP Reinforcing Bars After Temporal Exposure
-
64
-
A Machine Learning Approach to Modelling the Bond Strength of Adhesively Bonded Joints Under Water Immersion Condition
-
65
-
Ratio Between Protection Coefficients and Oversized Coefficients for Pultruded Elements in Fire
-
66
-
Residual Tensile Strength of Textile Reinforced Mortars After Have Been Exposed to Elevated Temperatures
-
67
-
Influence of Elevated Temperatures on the Bond Behaviour of Sand-Coated and Ribbed GFRP Rebars In Concrete – Pull-Out Tests and Calibration of Temperature-Dependent Bond Stress <italic>vs.</italic> Slip Laws
-
68
-
Fire Behaviour of GFRP-Reinforced Concrete Slab Strips: Fire Resistance Tests and Numerical Simulation
-
69
-
Effects of Impactor Geometry on Pultruded Composites Under Low-Velocity Impact Loading
-
70
-
Temperature Effects on the Mechanical Properties of the GFRP Sheets
-
71
-
A Novel Design Procedure for CFRP-Strengthened Concrete-Filled Steel Tubes to Resist Impact Loads
-
72
-
Flexural Performance of NSM CFRP Strengthened Concrete Beams Under Temperature
-
73
-
Compressive Behaviour of Glass Fiber-Reinforced Polymer (GFRP) Reinforced Concrete Columns
-
74
-
Behaviour of High-Strength Concrete Circular Columns Reinforced with GFRP Bars and Spirals Under Simulated Seismic Loading
-
75
-
Toward a Practical Approach to Experimental Evaluation of Cracking Behaviour of GFRP-Reinforced Concrete
-
76
-
Behaviour of Columns Constructed with Internal FRP Reinforcement Under Axial Loading
-
77
-
Performance of T-Beams, Using GFRP Reinforced and Geopolymer Concrete
-
78
-
Behaviour of Square Concrete Columns Reinforced with Macro-synthetic Fibres and GFRP Rebars Under Axial Compression
-
79
-
Accuracy of Existing Theoretical Models on the Assessment of the Design Shear Capacity of Slender RC Beams with Steel and GFRP Rods Without Transverse Reinforcement
-
80
-
Tensile Tests at GFRP Rebars
-
81
-
Experimental Study on the Compression Behaviour of Concrete Column Reinforced with Steel-FRP Composite Bar
-
82
-
Review of FRP Bar to Concrete Bond in Hygrothermal Conditions
-
83
-
Multiscale Reinforcement of Epoxy Composites with Glass Fibre and Carbon Nanotube
-
84
-
Modelling the Bond of GFRP Bar and Concrete for the Thermo-mechanical Behaviour of RC Slabs
-
85
-
The Influence of Reinforcement Ratio on the Shear Behaviour of Sand Coated Basalt FRP Bars Reinforced Beams
-
86
-
Structural Behavior of Axially Loaded Geopolymer Concrete Sandwich Wall Panel Reinforced with BFRP Grids
-
87
-
Development Length of GFRP Reinforcing Bars in Concrete Containing Seawater
-
88
-
Seismic Design Guideline for Hybrid GFRP-Steel RC Bridge Pier Considering Performance-Based Design
-
89
-
Influence of the Degree of Inclination of Applied Load on the Behaviour of Hybrid and FRP Elements
-
90
-
Structural Performances of Composite Pultruded GFRP Emergency Structures
-
91
-
Compressive Behavior of Circular Sawdust-Reinforced Ice-Filled Large Rupture Strain Fiber-Reinforced Polymer Tubular Short Columns
-
92
-
Feasibility of Bolted Connectors in Hybrid FRP-Steel Structures
-
93
-
Application of Steel and FRP Reinforcement Combination in Moment Resisting Frames: Prospects and Challenges
-
94
-
Behaviour of Filament Wound FRP-Rubberised Concrete-Steel Hybrid Double Skin Tubular Column (Hybrid RuDSTC) Under Axial Loading
-
95
-
Shear Performance of BFRP Reinforced Geopolymer Concrete One-Way Slab
-
96
-
Modelling the High Strain Rate Tensile Behavior of Steel Fiber Reinforced Concrete Using Artificial Neural Network Approach
-
97
-
Optimising CFRP Recycling via Arrhenius-Type Kinetic Behaviour Analysis
-
98
-
FRP Bridges in the Flanders Region: Experiences from the C-Bridge Project
-
99
-
Influence of the Stacking Angle on the Strength and Stiffness Properties of Tiled Laminates for Civil Applications: A DIC Based Approach
-
100
-
Black Ink-Facilitated Dispersion of Multi-walled Carbon Nanotubes and Fabrication of MWCNT/Glass Fibre/Epoxy Hybrid Composites