Measurement and Modeling of Thermoelastic Transformations in Nitinol (English)
- New search for: Perry, K. E.
- New search for: Labossiere, P. E.
- New search for: Steffler, E.
- New search for: Stevens, N.
- New search for: Lloyd, W. R.
- New search for: Perry, K. E.
- New search for: Labossiere, P. E.
- New search for: Steffler, E.
- New search for: Stevens, N.
- New search for: Lloyd, W. R.
In:
Experimental and applied mechanics
;
372
;
2006
-
ISBN:
- Conference paper / Print
-
Title:Measurement and Modeling of Thermoelastic Transformations in Nitinol
-
Contributors:Perry, K. E. ( author ) / Labossiere, P. E. ( author ) / Steffler, E. ( author ) / Stevens, N. ( author ) / Lloyd, W. R. ( author )
-
Conference:Annual conference, Experimental and applied mechanics ; 2006 ; Saint Louis, Mo
-
Published in:
-
Publisher:
- New search for: Society for Experimental Mechanics,
-
Publication date:2006-01-01
-
Size:372 pages
-
Remarks:Held on CD-ROM
-
ISBN:
-
Type of media:Conference paper
-
Type of material:Print
-
Language:English
-
Keywords:
-
Source:
© Metadata Copyright the British Library Board and other contributors. All rights reserved.
Table of contents conference proceedings
The tables of contents are generated automatically and are based on the data records of the individual contributions available in the index of the TIB portal. The display of the Tables of Contents may therefore be incomplete.
- 1
-
Experimental Validation of Nanoparticle-based DampingKireitseu, M. V. et al. | 2006
- 2
-
Computational Simulation of Stress-deformation in Nanoparticle-reinforced Composite MaterialsKireitseu, M. V. / Bochkareva, L. V. / Tomlinson, G. R. et al. | 2006
- 4
-
Particle Velocity Sensors for Modal Testing on Lightweight StructuresValent, L. / Vecchio, A. / Bregant, L. et al. | 2006
- 5
-
Analysis of Vibration Characteristics for Drillstrings Using Active CircuitsElsayed, M. A. / Aissi, C. / Kancharla, C. et al. | 2006
- 10
-
A Dual-actuator Load Frame for Mixed-mode Fracture of Laminated or Adhesively Bonded SpecimensDillard, D. A. / Singh, H. K. / Park, S. / Ohanehi, D. / McGaw, M. A. et al. | 2006
- 12
-
Deflection and Penetration Behavior of Propagating Mode-I Cracks Towards Weak Inclined InterfacesChalivendra, V. B. / Rosakis, A. J. / Hong, S. et al. | 2006
- 15
-
Smart Composite Patches for Repairing Aircraft Structural ComponentsGdoutos, E. E. / Marioli-Riga, Z. et al. | 2006
- 16
-
Method for Mapping Multi-axial Residual Stresses in Continuously-processed BodiesDeWald, A. T. / Hill, M. R. et al. | 2006
- 17
-
Research on Method of Fracture Toughness of Undisturbed Frozen SoilsLiu, X. / Li, H. / Wang, Y. et al. | 2006
- 18
-
Synthesis and Dimension Control of Ultrafine y-Aluminum Oxide by DetonationLi, R. Y. / Li, X. J. / Yan, H. H. / Xie, X. H. / Qu, Y. D. / Yang, Z. R. et al. | 2006
- 21
-
Enhancing the Mass Sensitivity of Microcantilever Sensors for Application in Liquid MediumsMorshed, S. / Prorok, B. C. et al. | 2006
- 23
-
Effect of Heating on Fiber ShrinkageEmri, I. / Bernstorff, B. V. / Voloshin, A. et al. | 2006
- 24
-
Study of Method of Damage Detection for PipelinesYang, Z. R. / Li, H. S. / Guo, X. L. / Li, H. Y. / Li, R. Y. et al. | 2006
- 26
-
The Mechanical Response of Tantalum Loaded Dynamically in ShearCerreta, E. / Gray, G. T. / Trujillo, C. P. / Cady, C. M. et al. | 2006
- 28
-
In-class Paper Experiments for Mechanics EducationXu, L. R. et al. | 2006
- 30
-
Dynamic Analysis of Damped Parametrically Excited Laminated Composite Curved Panels Under Non-uniform LoadingUdar, R. S. / Datta, P. K. et al. | 2006
- 31
-
Contour Measurement Using Radial MetrologyGilbert, J. A. / Matthys, D. R. / Biszick, K. R. et al. | 2006
- 32
-
Evolution of Strategically Tuned Absolutely Resilient Structures (STARS)Biszick, K. R. / Toutanji, H. A. / Gilbert, J. A. / Marotta, S. A. / Ooi, T. K. et al. | 2006
- 33
-
Adhesion Features of Bonded Interfaces Interpreted by Taguchi TechniqueChien, C.-H. / Chen, T. / Hsieh, C.-C. et al. | 2006
- 34
-
Steady State, Dynamic and Stability Analysis of a Loading ARC (worn) Journal Bearing Used in Turbo-generatorDargaiah, K. / Kamalam, P. et al. | 2006
- 35
-
Force Calibration via ElectrostaticsPratt, J. R. / Shaw, G. A. / Kramar, J. A. / Kumanchik, L. et al. | 2006
- 38
-
Interlaminar and In-plane Shear Strengths of a Unidirectional Carbon/Epoxy Laminated Composite under Impact LoadingYokoyama, T. / Nakai, K. et al. | 2006
- 39
-
Noise Sensitivity of Optical Techniques Using the Hole Drilling Approach for Residual Stress MeasurementBaldi, A. / Bertolino, F. et al. | 2006
- 41
-
Strain Measurements of Silicon Dioxide Microspecimens by Digital Imaging ProcessingSharpe, W. N. / Pulskamp, J. / Gianola, D. / Eberl, C. / Polcawich, R. / Thompson, R. et al. | 2006
- 43
-
Use of Operational Viscoelastic Material Properties from Time-dependent ExperimentsArenz, R. J. et al. | 2006
- 44
-
Experiments and Simulation of Laser Micromachining for Microsystem ApplicationsNowakowski, K. A. / Pryputniewicz, R. J. et al. | 2006
- 45
-
Direct and Indirect Measurements of Smooth Muscle Elastic ComponentsMeiss, R. A. et al. | 2006
- 46
-
Dynamic Loading of LIGA StructuresLu, W.-Y. / Jin, H. / Lee, S. / Gwinn, K. / Chen, W. / Song, B. et al. | 2006
- 47
-
Intervertebral Disc Dynamics and DegenerationNuckley, D. J. / Kramer, P. A. / Del Rosario, A. / Fabro, N. / Ching, R. P. et al. | 2006
- 48
-
Calibration of 3D Computer Vision Using Circular DotsLu, P.-F. / Hsu, C.-Y. et al. | 2006
- 50
-
Using 3D Digital Imaging Correlation Techniques to Validate Tire FEMMoser, R. A. / Lightner, J. G. et al. | 2006
- 51
-
Optical Methods for Monitoring the Infusion Process in Vacuum Assisted Resin Transfer Molding (VARTM)Bayldon, J. M. / Luo, J.-J. / Daniel, I. M. et al. | 2006
- 52
-
Solution to the Residual Stress Problem in Orthotropic Materials Using Genetic AlgorithmsCardenas-Garcia, J. F. / Zhou, Y. / Zapata, A. et al. | 2006
- 53
-
Measurement of Section Deformation of Circular Tubes under Cyclic BendingChang, K.-H. / Pan, W.-F. et al. | 2006
- 54
-
Study of Strengthening of an Austenitic Stainless Steel by Cold RollingBenamar, A. / Inglebert, G. / Lu, J. / Flavenot, J. F. / Barbarin, P. et al. | 2006
- 55
-
Influence of Crack Tip Sharpness on the Strain Distribution in RubbersFeichter, C. / Major, Z. / Lang, R. W. et al. | 2006
- 56
-
Axially Moving Beams and Varying Length: Wave Reflection and Propagation ApproachManconi, E. et al. | 2006
- 57
-
Comparison and Evaluation of Residual Stress Measurement Techniques, A Technical and Economical StudyBelassel, M. / Pineault, J. / Brauss, M. E. et al. | 2006
- 58
-
Input Laws for Dynamic Control: Theory, Experiments and RobustnessGarziera, R. / Manconi, E. / Silvestri, M. et al. | 2006
- 61
-
Through-thickness Characterization of Thick Composite LaminatesSchubel, P. M. / Luo, J. J. / Daniel, I. M. et al. | 2006
- 62
-
Prediction of Austenite-martensite Interfaces in CuAlNi Around a Notch TipCreuziger, A. / Shield, T. W. / Crone, W. C. et al. | 2006
- 63
-
Public Understanding of Nanotechnology: Effective Communication of Nanoscale ConceptsCrone, W. C. / Castellini, O. M. / Walejko, G. K. / Holladay, C. E. / Theim, T. J. / Zenner, G. M. et al. | 2006
- 64
-
Experimental Investigation of Radial Inertia Effects in Hopkinson Bar Testing of Extra-soft MaterialsSong, B. / Chen, W. / Weerasooriya, T. et al. | 2006
- 65
-
3D Finite Element Analysis of the SCS Shear Test SpecimenShort, S. R. et al. | 2006
- 67
-
A Force Transducer for Reinforced Concrete ColumnsCanbay, E. et al. | 2006
- 69
-
Comparison Between the Finite Element Model Updating Methods and the Virtual Fields MethodAvril, S. / Pierron, F. et al. | 2006
- 70
-
Residual Stress Determination Using Digital ShearographyFindeis, D. / Gryzagoridis, J. / Park-Ross, P. et al. | 2006
- 71
-
Analytical Model to Facilitate the Generation of Constant Strain Rate SHPB ExperimentsPuckett, A. D. et al. | 2006
- 72
-
Static Finite Element Validation of a Flexible Micro Air VehicleStanford, B. K. / Albertani, R. / Ifju, P. G. et al. | 2006
- 73
-
Digital Image Correlation Combined with Electronic Speckle Pattern Interferometery for 3D Deformation Measurement in Small SamplesReu, P. L. / Hansche, B. D. et al. | 2006
- 74
-
High-speed Multi-camera DIC for Finite Element Model Validation, Part 1Reu, P. L. / Miller, T. J. et al. | 2006
- 75
-
High-speed Multi-camera DIC for Finite Element Model Validation, Part 2Miller, T. J. / Reu, P. L. / Hinnerichs, T. D. / Lo, C. S. et al. | 2006
- 76
-
Widefield Laser Doppler Vibrometer Using High-speed CamerasReu, P. L. / Hansche, B. D. et al. | 2006
- 77
-
Adhesion, Roughness and Friction Characterization on Time-dependent Materials: Example with Fibrous StructuresFontaine, S. / Marsiquet, C. / Renner, M. et al. | 2006
- 78
-
A New Method of Measuring Young's Modulus Using Postbuckling BehaviorOhtsuki, A. et al. | 2006
- 79
-
Visualization and Simulation of Flexural Wave Propagation within Fibre-reinforced PolymersMueller, D. H. / Koenig, C. R. / Mueller, J. / Calomfirescu, M. et al. | 2006
- 80
-
360-deg Measurement on Tubular Samples with Axial StereogrammetryGenovese, K. / Cosola, E. / Pappalettere, C. et al. | 2006
- 81
-
Effect of Water Absorption on Fracture Toughness for GFRPESMaruyama, T. / Somiya, S. et al. | 2006
- 82
-
Standards Project for Optical Techniques of Strain Measurement: Final ReportBurguete, R. / Hack, E. / Kujawinska, M. / Patterson, E. A. / Saleem, Q. / Siebert, T. / Whelan, M. et al. | 2006
- 84
-
High Rate Tensile Strength Measurements of Frangible Bullets Using a Kolsky BarMates, S. P. / Rhorer, R. / Banovic, S. / Whitenton, E. / Fields, R. et al. | 2006
- 193
-
Analysis of Friction Stir Welds Using Image CorrelationAdapa, S. / Chu, T. P. / Schneider, J. et al. | 2006
- 85
-
Towards Real Time Crack Monitoring Using Image CorrelationLopez-Crespo, P. / Shterenlikht, A. / Patterson, E. A. / Yates, J. R. / Withers, P. J. / Burguete, R. et al. | 2006
- 86
-
Compression and Instrumented Indentation Measurements on Biomimetic PolymersJuliano, T. F. / Moy, P. / Weerasooriya, T. / VanLandingham, M. R. / Forster, A. M. et al. | 2006
- 87
-
Determination of Early Flow Stress in Ductile Specimens Using SHPBSong, B. / Chen, W. / Antoun, B. R. / Frew, D. J. et al. | 2006
- 88
-
SOD Based Modal Parameters Extraction for Distributed-parameter Vibration SystemsZhou, W. / Chelidze, D. et al. | 2006
- 236
-
Characterization of Heterogeneous Response of Pipeline Steel Weld Using Digital Image CorrelationYan, J. / Sutton, M. A. / Reynolds, A. P. / Adeeb, S. / Horsley, D. et al. | 2006
- 90
-
Residual Stresses from Interface Defects in Wafer Bonded SiliconHorn, G. P. / Mackin, T. J. / Lesniak, J. R. et al. | 2006
- 91
-
Opto-mechanical Modeling of Embedded Fiber Optic SensorsPeters, K. J. / Prabhugoud, M. et al. | 2006
- 93
-
Dynamic Damage Nucleation and Growth in Boron CarbidePaliwal, B. / Ramesh, K. T. et al. | 2006
- 95
-
Experimental Measurements of Strain Changes Around Fastener Holes during Cold ExpansionBackman, D. / Rutledge, R. / Yanishevsky, M. et al. | 2006
- 98
-
Development and Validation of a Viscoelastic Foam Model for Encapsulated ComponentsHinnerichs, T. D. / Urbina, A. / Paez, T. L. / O Gorman, C. et al. | 2006
- 100
-
Effect of Tool Parameters on Temperature Fields in High-speed MachiningMason, J. J. / Kazban, R. V. / Vemaza-Pena, K. M. et al. | 2006
- 102
-
Micromechanical Property Quantification Using Scanning Acoustic MicroscopyMarangos, O. / Katz, J. L. / Wang, Y. / Spencer, P. / Misra, A. et al. | 2006
- 103
-
Formulation for Time-temperature Dependent Fatigue Strength of CFRP LaminatesMiyano, Y. / Noda, J. / Nakada, M. et al. | 2006
- 105
-
Calibration and Performance Evaluation of Hydrogenated Amorphous Silicon Stress SensorsOlmi, G. / Freddi, A. / Bandini, M. / Lanzoni, M. / Ricco, B. et al. | 2006
- 106
-
Mixed-Mode I/II Fracture of Amorphous Diamond-like Carbon FilmsJonnalagadda, K. N. / Chasiotis, I. et al. | 2006
- 107
-
Dynamic Behavior of Three-wheeled Vehicle Under Random Road Characteristics Using FEMKoona, R. / Naidu, M. K. / Satyanarayana, B. et al. | 2006
- 111
-
Bio-inspired Structure: The Human SkullSpinhirne, N. / Ghosh, A. K. / Williams, A. et al. | 2006
- 112
-
Investigation of Pig Kidney Mechanical Properties Under Uniaxial LoadChen, Y.-J. / Nguyen, B.-V. / Liou, N.-S. et al. | 2006
- 113
-
Crack Propagation in Lamellar TiAl Under Mode I LoadingChiang, F.-P. / Ding, Y. / Uzer, G. / Ho, A. / Rosenberger, A. H. et al. | 2006
- 115
-
Characterization of Fracture Properties of Very Soft TissueGuo, D.-L. / Chen, B.-S. / Liou, N.-S. et al. | 2006
- 116
-
Micromechanical Properties of Polyurethane Foam with SiC NanoparticlesChiang, F.-P. / Ding, Y. et al. | 2006
- 117
-
Brazilian Tests in Lamellar TiAlChiang, F.-P. / Uzer, G. / Ding, Y. / Ho, A. / Rosenberger, A. H. et al. | 2006
- 118
-
3-D Shape Measurement Using a Micro/Nano Speckle MethodChiang, F.-P. / Uzer, G. et al. | 2006
- 118
-
Experimental measurement of strain changes around fastener holes during cold expansionBackman, David / Rutledge, Robert / Yanishevsky, Marko et al. | 2006
- 120
-
Studies of Dynamic Properties of MEMS and NEMS Using a Three Dimensional Nano-imagerBai, J. / Liu, S. / Gibson, R. F. / Shi, T. et al. | 2006
- 125
-
Young's Modulus Measurement Using a Transparent Indenter Measurement MethodFeng, C. / Kang, B. S.-J. et al. | 2006
- 127
-
Studies on Flexural and Thermal Response of Hand-layup Carbon/Epoxy CompositesHosur, M. V. / Chowdhury, F. H. / Jeelani, S. et al. | 2006
- 128
-
The Profile of Mode-I Crack Path in a Heterogeneous MaterialLiu, C. et al. | 2006
- 130
-
In-plane Thermal Diffusivity Measurements of C/C Brakes Using ThermographyZhang, Y. / Chu, T. et al. | 2006
- 132
-
Bridge Deflection Measurement Using Digital Image CorrelationYoneyama, S. / Kitagawa, A. / Iwata, S. / Tani, K. / Kikuta, H. et al. | 2006
- 133
-
Experimental Investigations of Spontaneous Bimaterial Interfacial FracturesXia, K. / Rousseau, C. E. / Rosakis, A. J. et al. | 2006
- 135
-
Thermo Viscoelastic Analysis with Heat Generation Under Cyclic LoadNakamura, J. / Sakaue, K. / Takashi, M. et al. | 2006
- 137
-
Optimization Method for Acquiring High Resolution Mapping of Elastic ModuliShilo, D. / Ganor, Y. et al. | 2006
- 138
-
Simultaneous Measurement of Two Independent Material Functions of Viscoelastic MaterialsUchiyama, Y. / Fujikawa, M. / Takashi, M. et al. | 2006
- 142
-
Estimation of Creep Deformation Applying Phased Stress on GFRPCSakai, T. S. / Somiya, S. S. et al. | 2006
- 143
-
Effect of Crystallinity on Creep Behavior of GFRPOMYamada, K. Y. / Somiya, S. S. et al. | 2006
- 144
-
Evaluation of Geometrical Effects to Viscoelastic Waves in PMMA BarsTamaogi, T. / Sogabe, Y. / Arimitsu, Y. / Wu, Z. et al. | 2006
- 146
-
Shape Measurement Method Using DMD Camera for Wide-reflectance ObjectsRi, S. / Fujigaki, M. / Matui, T. / Morimoto, Y. et al. | 2006
- 147
-
Temperature and Humidity Effect on Creep Behavior of Polybutylene SuccinateSomiya, S. / Sakai, T. S. et al. | 2006
- 149
-
Identification of Material Properties Using Full Field Measurement on Vibrating PlateGiraudeau, A. / Guo, B. / Pierron, F. et al. | 2006
- 150
-
SPIRE - Spectrometer Mirror Mechanism - Thermo-mechanical QualificationTurzo, G. T. / Pouliquen, D. P. / Mercier, K. M. / Baluteau, J. P. B. et al. | 2006
- 151
-
Frequency Response Function as Machinability IndicatorGiraudeau, A. / El Mansori, M. et al. | 2006
- 152
-
Digital Determination of the Secondary Principal Stress Parameters in Scattered-light PhotoelasticityLee, H. L. / Chen, T. Y. et al. | 2006
- 153
-
Static Qualification Logic for Ariane 5 StructuresTurzo, G. T. / Jacquesson, M. J. et al. | 2006
- 156
-
Tensile Stress-strain Properties and Fracture Resistance of Paper and PaperboardYokoyama, T. / Nakai, K. N. et al. | 2006
- 157
-
Mechanical Characterization of the Compression Behavior of Heterogeneous Polypropylene CompoundsJerabek, M. / Steinberger, R. / Major, Z. / Ravi-Chandar, K. et al. | 2006
- 158
-
A Shock Tube Based Facility for Impact TestingLi, Q. / Liu, D. / Templeton, D. / Raju, B. B. et al. | 2006
- 159
-
Modelling Pneumatic Circuits with Variable-geometry Nozzles: A Hybrid ApproachOlmi, G. / Vassura, G. et al. | 2006
- 160
-
Mechanics Properties and Corrosion Resistance Evaluation of Cadmium Replacement Coatings Applied on Boltsde Menezes, D. D. / Sathler, L. / de Oliveira, S. J. R. / de Castro, L. C. V. et al. | 2006
- 162
-
Using Genetic Algorithm for Parameter Reconstruction of a Chirped Fiber Bragg GratingCheng, H.-C. / Lo, Y.-L. et al. | 2006
- 163
-
Identification of an Elasto-plastic Constitutive Equation Using the Virtual Fields MethodPannier, Y. / Avril, S. / Rotinat, R. / Pierron, F. et al. | 2006
- 164
-
Experimental Investigation of Crack Path Instabilities in a Quenched PlateSakaue, K. / Takashi, M. et al. | 2006
- 165
-
Fracture Simulation of Renovated Sewage PipesArimitsu, Y. / Kawakami, Y. / Namiki, S. / Sogabe, Y. / Wu, Z. / Tamaogi, T. et al. | 2006
- 166
-
Experimental Evaluation of the Microplasticity Threshold in Metals Using Dissipation MeasurementsMaquin, F. / Pierron, F. et al. | 2006
- 167
-
Ultrasonic Stress Analysis of V-Notched Strip by Time-averaged Photoelasticity and FEMWang, W.-C. / Tsai, Y.-H. et al. | 2006
- 168
-
Novel Polariscope to Extract Multiple-parameter from Twisted Nematic Liquid CrystalYu, T. C. / Lo, Y.-L. et al. | 2006
- 172
-
Blast Loaded Thin Composite Plates - An Experimental StudyTekalur, S. A. / Shukla, A. / Ruggiero, P. et al. | 2006
- 174
-
Using Digital Micromirror Device for Digital Programmable Light Spectrum Synthesis SystemChuang, C.-H. / Lo, Y.-L. et al. | 2006
- 175
-
Identification of Hardening Behavior Using Inverse Modeling and Image CorrelationLecompte, D. / Cooreman, S. / Sol, H. / Vantomme, J. / Habraken, A. M. et al. | 2006
- 176
-
Uncertainty, Model Error, and Improving the Accuracy of Residual Stress Inverse SolutionsPrime, M. B. / Pagliaro, P. et al. | 2006
- 179
-
Optimization of a Fringe Projection Shape Measurement SystemGouverneur, I. M. / Furlong, C. et al. | 2006
- 180
-
Coupled Strain and Fresnel Response of Photoelastic Coatings at Oblique IncidenceHubner, J. / Chen, L. et al. | 2006
- 181
-
A Full-field Heterodyne Polariscope for Using New Image Signal ProcessLo, Y. L. / Chih, H. W. / Yeh, C. Y. et al. | 2006
- 182
-
Cell and Matrix Mechanics Determined by Cyclic Stretch of Bioartificial TissuesWille, J. J. / Elson, E. L. / Okamoto, R. J. et al. | 2006
- 183
-
A DIC Based Testing System for Fiber Reinforced Polymer (FRP) Strengthened Concrete PlatesHelm, J. D. / Kurtz, S. J. et al. | 2006
- 184
-
A New Type Atomic Force Microscope Based on Chaotic MotionsLiu, M. / Chelidze, D. et al. | 2006
- 185
-
Full-field Measurements for Permeability Identification by Inverse MethodsMorren, G. / Gu, J. / Sol, H. / Verleye, B. / Lomov, S. et al. | 2006
- 186
-
Dynamic Response of Dental StructuresOhlson, N. G. et al. | 2006
- 187
-
Near Threshold Fatigue Crack Growth in 7075-T651 Aluminum AlloyJordon, J. B. / Newman, J. C. / Xue, Y. / Horstemeyer, M. F. et al. | 2006
- 189
-
Analysis of Modified Nucleosides Using Glass Microfluidic DevicesMorris, D. L. / Thiede, C. P. / Huehls, A. M. / Sweeny, C. F. / Siahmakoun, A. Z. et al. | 2006
- 190
-
Identification of Joint Properties from Wave Amplitude MeasurementsZhang, B. / Waters, T. P. / Mace, B. R. et al. | 2006
- 192
-
Fracture and Fatigue Behavior of Carbon Nano Fiber Reinforced EpoxyPervin, F. / Zhou, Y. / Rangari, V. K. / Jeelani, S. et al. | 2006
- 195
-
Identifying Fatigue Damage Under Varying Environmental ConditionsLiu, M. / Chelidze, D. et al. | 2006
- 196
-
Tensile Testing of Thin-film Specimens on Polyamide Substrates Using SPDICPradhan, S. / Chu, T. C. / Aouadi, S. M. et al. | 2006
- 197
-
Finite Element Modeling of Tensile Test of Thin-film SpecimensPradhan, S. / Kim, D. / Chu, T. C. et al. | 2006
- 198
-
Damage Identification by Inverse Methods Using a Laser Velocity ScannerPetreli, A. / Sol, H. / Guillaume, P. et al. | 2006
- 200
-
Spatial Resolution, Noise, and Information Delocalization of Input Data for Inverse MethodsBossuyt, S. / Lecompte, D. / Sol, H. et al. | 2006
- 201
-
Heat Generation Assessment of The Phase Transformation in an SMA RibbonMaquin, F. / Pierron, F. / Avril, S. / Scarpa, F. et al. | 2006
- 202
-
Full-field Optical Measurement for Material Parameter Identification with Inverse MethodsGu, J. / Cooreman, S. / Smits, A. / Bossuyt, S. / Sol, H. / Lecompte, D. / Vantomme, J. et al. | 2006
- 203
-
Through-the-Thickness Strain Analysis of Single-lap Thick Composite JointsIsaicu, G. A. / Restivo, G. / Cloud, G. L. / Raju, B. B. et al. | 2006
- 204
-
Low-cost Non-destructive Inspection of Thinning Defects by Simplified Speckle InterferometryRestivo, G. / Isaicu, G. A. / Cloud, G. L. et al. | 2006
- 205
-
Modeling Damage in Human Vertebral Trabecular Bone under Experimental LoadingBredbenner, T. L. / Nicolella, D. P. / Davy, D. T. et al. | 2006
- 206
-
Crashworthiness of Adhesively Bonded Composite Structures and their Strain-rate SensitivitiesStarbuck, J. M. / Jacob, G. C. / Dillard, D. A. / Pohlit, D. J. et al. | 2006
- 207
-
Optimization of Clamp-up Procedure for Thick Composite JointsIsaicu, G. A. / Cloud, G. L. / Raju, B. B. et al. | 2006
- 208
-
Reliability and Precision of Embedded DSPI for the Measurement of Interior Strain FieldsRestivo, G. / Cloud, G. L. / Raju, B. B. et al. | 2006
- 211
-
Determination of Two Independent Elastic Properties by a Simple Tensile Loading TestFujikawa, M. / Uchiyama, Y. / Takashi, M. et al. | 2006
- 213
-
Thermoelastic Stress Measurement on Epoxy and on Fiber of CFRPPirisinu, J. / Marsili, R. / Moretti, M. / Rossi, G. L. et al. | 2006
- 217
-
Statistical Predictions for Short-Fiber Material Property Behavior with the INV~6 ClosureJack, D. A. / Smith, D. E. et al. | 2006
- 218
-
Effect of Particle Size on Fracture Behavior of Polyester/Al~2O~3 CompositesDu, Y. / Jain, N. / Shukla, A. et al. | 2006
- 219
-
Mechanical Shock Testing for LIGA Materials CharacterizationBateman, V. I. / Morales, A. M. et al. | 2006
- 221
-
Damage Quantification in Electrically Conductive Composite LaminatesLiberson, A. S. / Walsh, B. R. / Roemer, M. J. / Tandon, G. P. / Kim, R. Y. et al. | 2006
- 224
-
Fatigue and Fracture Mechanism of Cast AE44 Magnesium AlloysXue, Y. / El Kadiri, H. / Horstemeyer, M. F. / Fan, J. / McDowell, D. L. et al. | 2006
- 225
-
Optimized Designed with Experimentally Verified Finite Element Modeling Using DMI Strain Gage TechnologyRanson, W. F. / Vachon, R. I. et al. | 2006
- 226
-
Use of Transfer Artifacts for Small Force MeasurementShaw, G. A. / Gates, R. S. / Pratt, J. R. / Reitsma, M. G. et al. | 2006
- 230
-
Validation of a Combined Non-linear Joint and Viscoelastic Encapsulating Foam ModelUrbina, A. / Paez, T. L. / Gregory, D. L. / Resor, B. R. / Hinnerichs, T. D. / O Gorman, C. et al. | 2006
- 231
-
Identification of Material Properties of Composite Beams: Inverse Method ApproachEuler, E. / Sol, H. / Dascotte, E. et al. | 2006
- 232
-
Comparison Measures and Metrics for Validation of Mathematical ModelsPaez, T. L. / Urbina, A. et al. | 2006
- 235
-
MEMS Mirrors Array for Variable Optical Path DelaySnyder, R. / Broschat, B. / Kirkpatrick, S. R. / Siahmakoun, A. Z. et al. | 2006
- 237
-
Safety-based Integrated Structural Optimization in the Presence of UncertaintiesAzad, A. / Hansen, J. S. et al. | 2006
- 238
-
Mechanical and Physical Characterization of Lightweight Shotcrete Used for RepairRuggiero, P. / Shukla, A. / Brown, R. et al. | 2006
- 239
-
Microscale Characterization of LIGA Microsystems Using Digital Image CorrelationJin, H. / Lu, W.-Y. / Korellis, J. / Chames, J. / Yang, N. et al. | 2006
- 241
-
Experimental Uncertainty in Temperature Dependent Material Properties of Composite LaminatesSmarslok, B. / Speriatu, L. / Schulz, W. / Haftka, R. T. / Ifju, P. G. / Johnson, T. F. et al. | 2006
- 243
-
The Expansion Behavior of Human Lumbar Pedicle CortexInceoglu, S. / Kilincer, C. / Tami, A. / McLain, R. F. et al. | 2006
- 244
-
The Design and Commissioning of a Novel Tomographic PolariscopeTomlinson, R. A. / Yang, H. / Szotten, D. / Lionheart, W. R. B. et al. | 2006
- 245
-
Measurements of Relaxation Modulus Using NanoindentationLu, H. / Huang, G. et al. | 2006
- 246
-
Rail Crack Detection: An Infrared Approach to In-service Track MonitoringGreene, R. J. / Yates, J. R. / Patterson, E. A. et al. | 2006
- 247
-
Localized Stress Analysis of Robotic WeldsGreene, R. J. / Calvert, G. et al. | 2006
- 250
-
Fatigue Behavior and Design of Wood Composites as Furniture ComponentsDai, L. / Zhang, J. et al. | 2006
- 251
-
Dynamic Compressive Behavior of Crosslinked Silica AerogelsLu, H. / Luo, H. / Churu, G. / Leventis, N. et al. | 2006
- 255
-
A Generalized Approach for Computing Eigenvector Design SensitivitiesSmith, D. E. / Siddhi, V. et al. | 2006
- 256
-
Advanced Experimental Techniques for Whole-field Nano-mechanics MeasurementWang, Z. / Xing, Y. et al. | 2006
- 258
-
Core/Skin Debond Fracture Toughness of S2-Glass/Epoxy Sandwich Composites with Nanophased Polyurethane CoreSaha, M. C. / Kabir, E. / Jeelani, S. et al. | 2006
- 261
-
Testing System Development for Creep Characterization of PolymersSteinberger, R. / Vezer, S. / Major, Z. / Lang, R. W. et al. | 2006
- 262
-
Long Duration Shock Pulse Shaping Using Nylon WebbingDavie, N. T. et al. | 2006
- 263
-
Effect of Strain Rate on Compression Behavior of Syntactic FoamsSaha, M. C. / Nilufar, S. / Jeelani, S. et al. | 2006
- 264
-
NDE of RCC Using Digitome Volumetric X-ray Image SystemChu, T. P. et al. | 2006
- 267
-
Effect of Processing on Inelastic Fracture Behavior of 2024 AluminumCavalli, M. N. / Mandava, V. et al. | 2006
- 269
-
Inverse Calculation of Vehicle Excitations from Road Test MeasurementsEngelhardt, C. W. / Gordon, W. et al. | 2006
- 270
-
Experimentally-based Viscoelasic Model for Polyurea, Including Pressure and Temperature EffectsAmirkhizi, A. V. / Isaacs, J. / Nemat-Nasser, S. et al. | 2006
- 271
-
An Elastomeric Self-healing MaterialKeller, M. W. / White, S. R. / Sottos, N. R. et al. | 2006
- 272
-
Representative Volume Element of Polycrystalline Silicon for MEMSChasiotis, I. / Cho, S. W. et al. | 2006
- 274
-
Pre-sliding Friction Dynamics in High Precision Machine SlidesChattopadhyay, S. et al. | 2006
- 275
-
Multiscale Finite-element Modeling of a Tantalum Impact ExperimentKuchnicki, S. N. / Radovitzky, R. A. / Vogler, T. J. / Cuitino, A. M. et al. | 2006
- 277
-
Elasto-plastic Material Parameter Identification by Inverse Methods: Sensitivity Matrix CalculationCooreman, S. / Bouffioux, C. / Lecompte, D. / Debruyne, D. / Sol, H. / Vantomme, J. et al. | 2006
- 278
-
The Dynamic Behaviour of ConcreteTsembelis, K. / Chapman, D. J. / Braithwaite, C. H. / Proud, W. G. et al. | 2006
- 279
-
Dynamics of Fatigue Micro Fracture of Porous Ceramics Studied by Source Wave Analysis of Acoustic EmissionYonezu, A. / Ogawa, T. / Takemoto, M. et al. | 2006
- 280
-
Monitoring of Stress Corrosion Cracking in Stainless Steel Weldments by Acoustic and Electrochemical MeasurementYonezu, A. / Cho, H. / Ogawa, T. / Takemoto, M. et al. | 2006
- 282
-
Parametric Simple and Combination Resonance Characteristics of Plates Under Tensile Loading: An Experimental StudyDatta, P. K. / Udar, R. S. et al. | 2006
- 283
-
Experimental Model Validation of Foam Encapsulated ComponentsO Gorman, C. C. / Hunter, P. S. / Hinnerichs, T. D. / Paez, T. L. / Urbina, A. et al. | 2006
- 284
-
A Comparative Study of Hopkinson Bar Techniques for Soft MaterialsCasem, D. et al. | 2006
- 285
-
Dynamic Response of an Alternative Tissue Simulant, Physically Associating Gels (PAG)Moy, P. / Weerasooriya, T. / Juliano, T. F. / VanLandingham, M. R. / Chen, W. et al. | 2006
- 286
-
Self-sensing CompositesRye, P. / Schaaf, K. / Starr, A. / Nemat-Nasser, S. et al. | 2006
- 287
-
Nanocapsules for Self-healing CompositesBlaiszik, B. J. / White, S. R. / Sottos, N. R. et al. | 2006
- 288
-
Residual Stress and Damage Initiation in Small Stainless Steel PipeworkQuinn, S. / Tatum, P. J. / Dulieu-Barton, J. M. / Eaton-Evans, J. et al. | 2006
- 290
-
Thermomechanical Experimental Study with 2-D Dissipative Source ReconstructionRenault, N. / Andre, S. / Mollimard, V. / Cunat, C. et al. | 2006
- 291
-
Evolution of Microstructure and Plastic Dissipation in Zirconium During High Rate DeformationPadilla, H. A. / Smith, C. D. / Beaudoin, A. J. / Lambros, J. / Robertson, I. M. et al. | 2006
- 292
-
Microscopic Material Characterization Using SEM Topography Images CorrelationKang, J. / Schmidt, T. / Jain, M. / Wilkinson, D. S. et al. | 2006
- 296
-
Composites with Negative Refractive IndexAmirkhizi, A. V. / Nemat-Nasser, S. / Plaisted, T. / Starr, A. et al. | 2006
- 297
-
Self-healing CompositesPlaisted, T. / Nemat-Nasser, S. et al. | 2006
- 298
-
Shock and Recovery of Flourinated PolymersBrown, E. N. / Trujillo, C. P. / Rae, P. J. / Gray, G. T. et al. | 2006
- 300
-
MEMS Dynamics: Measurements and ModelingPryputniewicz, R. J. / Marinis, R. T. / Klempner, A. R. / Hefti, P. et al. | 2006
- 301
-
Advances in Optoelectronic Metrology: from Milliscale to Nanoscale ApplicationsPryputniewicz, R. J. et al. | 2006
- 302
-
Vibration Based Structural Health Monitoring of Prebended Steel - VHPC BeamsSiegert, D. / Staquet, S. / Cumunel, G. / Goursat, M. / Toutlemonde, F. et al. | 2006
- 304
-
Effect of Polyurea on the Dynamic Response of Steel PlatesAmini, M. R. / Isaacs, J. B. / Nemat-Nasser, S. et al. | 2006
- 310
-
High Sensitivity Shadow Moire Using Nonzeroth-Order Talbot DistancesCox, A. / Han, B. / Han, C.-W. et al. | 2006
- 311
-
Influence of Surface Properties on the Fracture of MEMS BeamsAlan, T. / Zehnder, A. T. et al. | 2006
- 314
-
Nano-pattern Recognition and Correlation Technique for Deformation Measurements of Nano-structuresBi, H. / Hartsough, C. M. / Han, B. et al. | 2006
- 315
-
Mixed-mode I/III Crack Growth in Ductile Materials; Part I: ExperimentsYan, J. H. / Sutton, M. A. / Deng, X. / Cheng, C.-S. et al. | 2006
- 316
-
Mixed-mode I/III Crack Growth in Ductile Materials; Part II: SimulationsWei, Z. / Deng, X. / Sutton, M. A. / Cheng, C.-S. et al. | 2006
- 317
-
Elimination of Singularities in Parallel Robotic ManipulatorsKumar, M. / Dash, A. K. et al. | 2006
- 320
-
Interfacial Adhesion in Multi-stage Injection Molded ComponentsAnanthanarayanan, A. / Bruck, H. A. / Gupta, S. K. et al. | 2006
- 321
-
On the Identification of Mechanical Properties Using Structural Tests and Optical MethodsCrouzeix, L. / Moreno, H. H. / Perie, J.-N. / Douchin, B. / Robert, L. / Collombet, F. et al. | 2006
- 322
-
Optical Fiber AE System for Damage Monitoring of CFRP PlateMatsuo, T. / Cho, H. / Takemoto, M. et al. | 2006
- 323
-
Development of an Anisotropic, Energy Dependent Model for PZTSimmermacher, T. / Jones, S. C. / Urbina, A. / Griffith, D. T. / Reeder, D. et al. | 2006
- 324
-
Bio-inspired, Modular, and Multifunctional Thermal and Impact Protected (TIPed) Embedded Sensing Controls Actuation Power Element (ESCAPE) StructuresGyger, L. S. / Spranklin, B. W. / Gupta, S. K. / Bruck, H. A. et al. | 2006
- 325
-
Connection Hub Optimization Using Theoretical and Simulated Analysis ResultsWowczuk, Z. S. / Williams, K. A. / Smith, J. E. et al. | 2006
- 326
-
Experimental Stress/Strain Analysis of an Aircraft Platform Using Experimental DataWowczuk, Z. S. / Lucey, S. / Smith, J. E. et al. | 2006
- 327
-
Fracture Toughness of PMMA as a Function of Loading RateWeerasooriya, T. / Moy, P. / Casem, D. / Cheng, M. / Chen, W. et al. | 2006
- 328
-
Development of a Biaxial Stretching Machine for Rubbers by Optical MethodsSasso, M. / Amodio, D. et al. | 2006
- 329
-
Dynamic Material Characterization by SHPB Tests and FE OptimizationSasso, M. / Amodio, D. / Newaz, G. et al. | 2006
- 330
-
The Role of the Stress Environment on Fibrocartilage DevelopmentThomopoulos, S. / Genin, G. / Das, R. / Birman, V. et al. | 2006
- 331
-
Developing Advanced Polymer Nanocomposites via a New Combinatorial Approach based on Twin Screw ExtrusionKota, A. K. / Choudhary, F. / Bruck, H. A. / Bigio, D. I. / Raghavan, S. / Duesterberg, M. / Powell, D. et al. | 2006
- 332
-
Preventing Bone Loss Improves Tendon-Bone Healing in a Canine ModelThomopoulos, S. / Matsuzaki, H. / Zaegel, M. / Gelberman, R. H. / Silva, M. J. et al. | 2006
- 333
-
Identification of Ductile Damage Parameters Using Digital Image ProcessingRossi, M. / Broggiato, G. B. / Papalini, S. et al. | 2006
- 334
-
Detection of Cancer Markers via Nanoparticle-based Mass EnhancementSavran, C. A. / Low, P. S. / Hanne, W. A. / Dooreweerd, D. / Lee, J. et al. | 2006
- 335
-
Finite Element Modeling of Monolithic Dome StructuresSadid, H. / South, N. et al. | 2006
- 336
-
Nanoindentation of Cr~3C~2-Ni CermetsDu, X. / Jasiuk, I. / Hussainova, I. et al. | 2006
- 338
-
An Analysis of Impact Test SystemsChao, Y. J. et al. | 2006
- 342
-
Material Characterization of Coal Gasification ByproductsMohanty, S. / Chugh, Y. P. et al. | 2006
- 343
-
Identifying Polymer Aging Through Indentation Testing: Experimental and Modeling ResultsNagendran, K. B. / Bradshaw, R. D. et al. | 2006
- 346
-
A Novel Loading Method for Stimulation of Trabecular Bone Growth in MiceChristiansen, B. A. / Silva, M. J. et al. | 2006
- 348
-
A Novel Testing Device for Mechanical Characterization of Individual Micro-/Nano- scale FibersSingh, U. / Kaul, P. / Abramson, A. R. / Prakash, V. et al. | 2006
- 349
-
Dynamic Compression of Amorphous and Annealed Bulk Metallic GlassSunny, G. / Lewandowski, J. J. / Prakash, V. et al. | 2006
- 352
-
Dynamic Tensile Deformation of Aluminum Alloy 6061-T6 and 6061-OATang, X. / Prakash, V. / Lewandowski, J. J. et al. | 2006
- 353
-
Investigations of High-speed Friction at Metal-on-metal InterfacesYuan, F. / Prakash, V. et al. | 2006
- 357
-
Dynamic Failure of Microelectromechanical SystemsKimberley, J. / Chasiotis, I. / Lambros, J. et al. | 2006
- 358
-
Shock and Vibration Characteristics of a Bio-inspired Structure Under Blast LoadingMathews, J. / Metzger, J. / Ghosh, A. K. et al. | 2006
- 359
-
Optical Coherence Tomography with an Auto-Focus Device for the Refractive Index and Thickness MeasurementsLo, Y.-L. / Yen, C.-C. / Liao, C.-C. / Chen, S.-J. et al. | 2006
- 360
-
Experimental Techniques to Numerical Analyses: The Missing Link in Inverse ModellingLakshmi, S. S. / Siviour, C. R. / Petrinic, N. / Elliott, B. C. F. et al. | 2006
- 361
-
Fatigue and Stress Monitoring with Magnetic Sensor ArraysGoldfine, N. / Grundy, D. / Washabaugh, A. / Craven, C. / Weiss, V. / Zilberstein, V. et al. | 2006
- 365
-
Determining Material Properties of Orthotropic BimaterialsEkwaro-Osire, S. / Cardenas-Garcia, J. F. / Weber, G. G. et al. | 2006
- 367
-
Stress Analysis of Pinned Aluminum Joint by Reflective PhotoelasticityFoust, B. E. / Lesniak, J. A. / Rowlands, R. E. et al. | 2006
- 369
-
Laboratory Evaluation of Weathering and Freeze-thaw Effects on Silicone Foam Bridge Joint SealantShrestha, M. R. / Malla, R. B. / Boob, S. / Shaw, M. T. et al. | 2006
- 370
-
Testing of a Steel-adhesive-repair System for PipelineRosas, M. A. / Dias, J. S. / Grion, J. C. / Lima, L. O. / Soares, N. F. / Vieira, R. D. / Freire, J. L. F. et al. | 2006
- 371
-
Comparison of Local Strain Measurements done by Strain Gage and Differential Thermographic TechniqueCasavola, C. / Galietti, U. / Modugno, D. / Pappalettere, C. et al. | 2006
- 372
-
Measurement and Modeling of Thermoelastic Transformations in NitinolPerry, K. E. / Labossiere, P. E. / Steffler, E. / Stevens, N. / Lloyd, W. R. et al. | 2006
- 376
-
Techniques to Analyze Displacements and Contouring of SurfacesSciammarella, C. A. / Lamberti, L. / Posa, D. et al. | 2006
- 377
-
Development of Scalable Optoelectronic Methodologies for Characterization of Surface Shape and DeformationFurlong, C. / Gouverneur, I. M. / Rodgers, M. T. et al. | 2006
- 378
-
Performance Comparison of White Light - Optical ProfilometersBaldi, A. / Ginesu, F. / Pedone, P. / Romano, D. et al. | 2006
- 381
-
Strain Analysis of Dislocations in Crystalline StructuresSciammarella, F. M. / Sciammarella, C. A. / Lamberti, L. et al. | 2006
- 388
-
MEMS Education: Design, Fabrication, and CharacterizationHan, W. / Furlong, C. / Pryputniewicz, R. J. et al. | 2006
- 390
-
Sensor Data-fusion for Prognostication of Extreme Environment ElectronicsLall, P. / Hande, M. / Bhat, C. / Islam, N. / Rahim, K. / Suhling, J. C. / Lee, J. et al. | 2006
- 391
-
Physical Aging Effects in Solders and Underfill EncapsulantsMa, H. / Lin, C. / Suhling, J. C. / Lall, P. et al. | 2006
- 396
-
Time-dependent Behavior of Climbing RopesEmri, I. / von Bernstorff, B. S. / Nikonov, A. / Zupancic, B. et al. | 2006
- 397
-
Viscoelastic Analysis of Drive BeltsEmri, I. / Kramar, J. / Nikonov, A. / Cvelbar, R. / Florjancic, U. et al. | 2006
- 400
-
The Behaviour of Water Saturated Sand Under Shock-loadingChapman, D. J. / Tsembelis, K. / Proud, W. G. et al. | 2006
- 401
-
Characterization of Environmental Degradation Mechanisms in Epoxy-clay NanocompositesKhait, M. / Singh, R. P. et al. | 2006
- 402
-
FRP Delamination under Lateral Impact and Inplane CompressionSridharan, S. / Li, Y. et al. | 2006
- 403
-
Effect of Mechanical Loading and Environmental Degradation on Carbon Fiber Reinforced CompositesSingh, A. K. / Singh, R. P. et al. | 2006
- 404
-
Blast Response of Carbon-fiber Reinforced Masonry WallsUrgessa, G. / Maji, A. K. et al. | 2006
- 405
-
High Rate Characterization of Low Impedance Materials Using a Polymeric Split Hopkinson Pressure BarCronin, D. S. / Salisbury, C. P. / Horst, C. R. et al. | 2006
- 406
-
A Novel Test Method for the Assessment of Self Tapping Performance of Bone ScrewsKincaid, B. L. / Mason, J. J. / Schroder, L. et al. | 2006
- 407
-
Identification of the Stress-strain Behavior of a Tensile Specimen after NeckingDebruyne, D. / Cooreman, S. / Lecompte, D. / Sol, H. / Van Hemelrijck, D. et al. | 2006
- 408
-
Phase Unwrapping of Electronic Speckle Pattern Interferometry MapsHuang, M. J. / Kuo, K. M. et al. | 2006
- 409
-
Shearing Interferometer Using Achromatic Light SourceLin, S.-T. / Cheng, H.-Y. et al. | 2006
- 410
-
Development and Characterization of a Miniaturized PEM Fuel-cell for MEMS ApplicationsKuppers, J. D. / Furlong, C. et al. | 2006
- 411
-
Real-time Observations of Dynamic Necking and Fragmentation in an Expanding Ring ExperimentZhang, H. / Ravi-Chandar, K. et al. | 2006
- 414
-
Dynamic Design of Structure Using Operational Modal AnalysisGondhalekar, A. C. et al. | 2006
- 415
-
Modeling of Damage and Failure Using CDM (Continuum Damage Mechanics) in Plastic DeformationZagade, P. R. et al. | 2006
- 418
-
Effects of Surface Morphology and Loading Rates on Dynamic Interfacial FractureSyn, C.-J. et al. | 2006
- 419
-
Formation and Effects of Anisotropy in Wire DrawingPinto, M. et al. | 2006
- 423
-
High Speed Imaging Systems: Mechanics PerspectiveTiwari, V. et al. | 2006
- 424
-
Nanomechanical Behavior of Individual Polymer Micro/nano-structures Using a Novel Characterization DeviceKaul, P. et al. | 2006
- 425
-
Novel Thermal Management Technique Using Thermoelectric MicrocoolersAbidi, F. A. et al. | 2006
- 426
-
Removal of Halation Effects in Shape Measurement Using Phase Reliability Evaluation ValueRi, S. et al. | 2006
- 427
-
Time Dependent Surface Transformations in NiTi Caused by PolishingCreuziger, A. et al. | 2006
- 428
-
Mechanical Behavior of Lightweight Shotcrete Containing CenospheresRuggiero, P. et al. | 2006
- 429
-
Dynamic Behavior of Soda Lime Glass Under Biaxial LoadingNie, X. et al. | 2006
- 430
-
Plasticity and Energy Dissipation in MetalsPadilla, H. A. et al. | 2006
- 431
-
Optimization Studies of Composite Materials with Integrated Embedded Sensor NetworksSchaaf, K. et al. | 2006
- 433
-
Failure Analysis of Composite Asphalt Concrete Pavement SystemsSubramaniam, V. K. S. et al. | 2006
- 434
-
Nanoindentation and Finite Element Modeling of Extracellular Matrix ProteinsFranck, C. et al. | 2006
- 435
-
Blast Resistance of Woven and Layered Composite MaterialsTekalur, S. A. et al. | 2006
- 436
-
Viscoelastic Properties of PolyureaAmirkhizi, A. V. et al. | 2006
- 438
-
Advanced Warpage Measurement Using Far Infrared TWYMAN-Green InterferometryCox, A. et al. | 2006
- 439
-
Heterogeneous Nanoscale Strain Fields in Polymer NanocompositesChen, Q. et al. | 2006
- 440
-
Phase Boundary Propagation and Fracture in NitinolDaly, S. et al. | 2006
- 441
-
Radial Inertia Effects on Dynamic Response of Soft Biological TissuesGe, Y. et al. | 2006
- 447
-
Dynamic Tensile Behavior of Aluminum Alloys 6061-T6 and -OATang, X. et al. | 2006
- 448
-
In-situ Temperature and Stress Measurements Using Neutron DiffractionWoo, W. et al. | 2006
- 450
-
Development of DEM Validation Tools with 3D X-ray Particle Tracking SystemGovender, I. / McBride, A. T. / Powell, M. S. et al. | 2006
- 451
-
Full Field Strain Measurement During a Tensile Split Hopkinson Bar ExperimentGilat, A. / Schmidt, T. / Tyson, J. et al. | 2006
- 452
-
A New Method for Vibration Modal AnalysisZhou, W. et al. | 2006
- 453
-
Microsample Tensile Testing of Platinum Alloys Using ISDG TechniquesKovalchick, C. et al. | 2006