The Design of Control System for Auto-Packing Pantyhose Machine (English)
- New search for: Li, P.X.
- New search for: Sun, Z.J.
- New search for: Zhu, H.L.
- New search for: Sun, Y.Z.
- New search for: Li, P.X.
- New search for: Sun, Z.J.
- New search for: Zhu, H.L.
- New search for: Sun, Y.Z.
- New search for: Zhang, Liangchi
- New search for: Zhang, Chunliang
- New search for: Chen, Zichen
In:
Mechatronics and materials processing;(ICMMP 2011)
;
2288-2291
;
2011
-
ISBN:
-
ISSN:
- Conference paper / Print
-
Title:The Design of Control System for Auto-Packing Pantyhose Machine
-
Contributors:Li, P.X. ( author ) / Sun, Z.J. ( author ) / Zhu, H.L. ( author ) / Sun, Y.Z. ( author ) / Zhang, Liangchi / Zhang, Chunliang / Chen, Zichen
-
Conference:International conference, Mechatronics and materials processing;(ICMMP 2011) ; 2011 ; Guangzhou, China
-
Published in:ADVANCED MATERIALS RESEARCH -ZUG- ; 328/330 ; 2288-2291
-
Publisher:
- New search for: Trans Tech
-
Place of publication:Durnten-Zurich
-
Publication date:2011-01-01
-
Size:4 pages
-
Remarks:Includes bibliographical references.
-
ISBN:
-
ISSN:
-
Type of media:Conference paper
-
Type of material:Print
-
Language:English
-
Keywords:
-
Source:
© Metadata Copyright the British Library Board and other contributors. All rights reserved.
Table of contents conference proceedings
The tables of contents are generated automatically and are based on the data records of the individual contributions available in the index of the TIB portal. The display of the Tables of Contents may therefore be incomplete.
- 5
-
A Note on Two Cooling Methods in Surface GrindingNguyen, T. / Zhang, L.C. et al. | 2011
- 9
-
Thermodynamic Properties of Water during Phase Transition and Simulation on Freezing Process in Fractured RockKang, Y.S. / Liu, Q.S. / Yan, J. et al. | 2011
- 13
-
Design of Flexible Multi-Gripper Stretch Forming Machine by FEMPeng, H.L. / Li, M.Z. / Han, Q.G. / Feng, P.X. / Zhang, H.H. et al. | 2011
- 18
-
Fatigue Reliability and Optimal Design Research of TBM CutterWang, Z.Q. / Yu, T.B. / Zou, Y. / Wang, C.X. / Zhao, H.F. / Wang, W.S. et al. | 2011
- 22
-
Forming Process and Mechanism of Microcapillary Grooves of Miniature Cylindrical Heat PipeWan, Z.P. / Li, Y.C. et al. | 2011
- 27
-
Recent Development of Vibration-Assisted Abrasive MachiningHan, G.C. / Li, B. et al. | 2011
- 32
-
The MOSFET Model with an Anti-Parallel Diode as a Power SwitchJing, T. / Chang, D.T. / Zhao, C.H. et al. | 2011
- 36
-
Design and Magnetic Circuit Analysis on Claw-Pole Permanent Magnet Generator for Vehicle ApplicationMa, J.W. / Yin, W.J. / Yu, W.H. / Ji, Q.S. et al. | 2011
- 41
-
Study on Single-Hoist Multi-Objective Optimization Rescheduling ProblemWang, S.L. / Zhou, H. / Zhou, J. / Tang, R. et al. | 2011
- 48
-
Study on Fiber Laser Welding for DP780 High Strength SteelHuang, T. / Xin, L.J. / Wang, Z.Y. et al. | 2011
- 54
-
One Optimizing Method for Moments of Inertia Applied with Improved Adaptive Genetic AlgorithmSun, H.H. / Luo, M.Z. / Dong, X. / Zha, S.H. et al. | 2011
- 58
-
Numerical Simulation of Temperature Field during the Growth of Nd:GGG Laser CrystalZhang, C.H. / Bi, L. / Gong, Z.Z. et al. | 2011
- 63
-
Design for Deep Groove Ball Bearing Assembly Machine's Cam Drive System Based on Parametric ModelingLiu, Y.X. / Peng, R.S. et al. | 2011
- 67
-
Function Simulation of the TBM Based on VRMLWang, Z.Q. / Yu, T.B. / Wang, C.X. / Zou, Y. / Zhao, H.F. / Wang, W.S. et al. | 2011
- 71
-
Study on the Reverse Designing for Water Cavity Model of Engine's Cylinder HeadChen, M. / Liu, X.X. / Tian, J.P. et al. | 2011
- 75
-
A Method about Functional Coupling Based on TrimmingWang, W. / Jiang, P. / Wang, J.Q. / Tan, R.H. et al. | 2011
- 81
-
Research on Structure Analysis of Asphalt Box Based on ANSYSZhang, Y.Y. / Zhu, M.M. et al. | 2011
- 85
-
Graphic Thinking Process in Innovative Product DesignPi, Y.S. / Yang, Y.Y. et al. | 2011
- 90
-
Multi-Toothed Milling Force Model and Simulation for Form Milling the Gear of the Hypoid GearsJia, X.J. / Deng, X.Z. / Ren, X.Z. et al. | 2011
- 96
-
Theoretical Investigation and Analysis of Solar Thermoelectric Air ConditioningQi, Z.H. / Xu, L.Y. / Sun, B.H. et al. | 2011
- 100
-
The Finite Element Analysis of Different Materials' Anti-Seismic Performance of NC Tool RodsRong, J.X. / Zhang, X. / Ji, J. et al. | 2011
- 104
-
Temperature Fields Characteristics on Removal Rock by High-Energy LasersYi, X.Z. / Ma, W.G. / Cai, Z.L. / Jiang, S.Z. et al. | 2011
- 108
-
Experimental Study on Bionic Screw Pile of Reducing Adhesion and ResistanceZhang, D.W. / Wang, Y.X. / Tang, Y.Q. / Zeng, W. et al. | 2011
- 115
-
Heat Source and Heat Partition Models in ELID GrindingMa, B.J. / Zhu, Y.Q. / Jin, X.L. et al. | 2011
- 120
-
The Study of Hot Embossing and Bonding Machine for Microfludic Chips FabricationZhang, F.L. / Zhu, J. et al. | 2011
- 124
-
Comparison of the Isothermal and Non-Isothermal Kinetics for Predicting the Thermal Hazard of Tert-Butyl PeroxybenzoateLin, C.P. / Chang, Y.M. / Tseng, J.M. / You, M.L. et al. | 2011
- 128
-
Max-Min Ant System Approach for Solving Construction Site LayoutNing, X. / Liu, W.H. et al. | 2011
- 132
-
Application of Wavelet Envelope Spectrum Analysis in Air Blower Rotating Stall Failure DiagnosisMa, Z.Q. / Gao, J.C. / Zhang, Z.Q. / Kang, D.L. et al. | 2011
- 136
-
A Study on the Large-Diameter Seamless Gas Cylinder Dimensional Accuracy of Rotary Expanding Process with Finite Element AnalysisJin, S.Y. / Huang, Z.G. / Shao, Z.K. / Li, M.X. / Sun, H.L. / Li, Y.T. / Fang, Z.X. et al. | 2011
- 143
-
Study on Parametrical Modeling about Free-Surface Based on UG CustomizationGeng, T. / Ren, Q.H. et al. | 2011
- 147
-
Design of Emergency Call System of Forklift Based on the Existing GSM NetworkDeng, Q. / Zhang, W.Q. et al. | 2011
- 151
-
Design and Simulation of Pastry Slicer Based on SolidWorks and ADAMSQiu, S.Y. / Wu, H.T. / Liu, H.B. et al. | 2011
- 155
-
Research on the Maximum Flow of Air Traffic Network Based on Discrete Time Loss QueuingWu, Z.Y. / Hu, J. / Huang, Z.T. et al. | 2011
- 159
-
Research on Reconstruction 3D CAD Data of Automotive Panel Based on Reverse EngineeringZhan, X.H. / Li, X.D. / Liu, X.Y. et al. | 2011
- 163
-
Digital Test Instrument of Radial Direction Displacement Precise for Round Shape Part Based on LabviewTanli, M.Q. / Zhang, Q. / Yang, X.J. / Jiang, Y. / Peng, R.S. et al. | 2011
- 167
-
Research on Electromagnetic Pick-up Type Grip DeviceZheng, G.F. / Yang, J. / Zhang, W.L. / Ling, L. et al. | 2011
- 172
-
Construction Enterprise Supply Chain Design ResearchChen, L.F. / Wu, G. / Zhang, Y.B. et al. | 2011
- 176
-
Failure Analysis of Welding Joints of CQ SteelXin, L.J. / Huang, T. / Wang, Z.Y. et al. | 2011
- 181
-
An Outline of Methods in Machining Curved HoleQian, Y.P. / He, Y. / Huang, J.H. / Zhou, X.Z. et al. | 2011
- 186
-
Study on Tooth Profile of Involute Conjugated Internal Gear for High-Pressure Internal Gear PumpsSong, W. / Zhou, H. et al. | 2011
- 190
-
An Alternative Method of Preoperative Planning for Fibula Free Flap in Mandibular ReconstructionChen, Y.D. / Qin, X.J. / Wu, W.Z. / Cui, X.Y. / Li, H. / Wang, W.S. et al. | 2011
- 194
-
Uncertainty in Project Management Based on Lean Construction ImplementationQiu, X. et al. | 2011
- 199
-
The Environment Temperature Simulation Research of GyroscopeYuan, S. / Wang, Y.B. et al. | 2011
- 203
-
Experimental Study on the Tribological Characteristics of Nanometer WS~2 Lubricating Oil Additive Based on Engine OilChen, C.B. / Mao, D.H. / Shi, C. / Liu, Y. et al. | 2011
- 209
-
Design of Micro Electromagnetic Vibration Energy Harvester and Storage System Based on Human MotionZhang, Y.B. / Cao, H.Y. / Zhang, E.H. et al. | 2011
- 213
-
Design and Optimization of FCEV Subframe by Integrated Applications of Hypermesh, UG and ADAMS Multi-PlatformLiao, J. et al. | 2011
- 220
-
Green Design and Manufacturing Technology on Hoisting Device of the Silt Coal Car LoaderMao, P.H. / Chen, R.D. / Zhai, B. et al. | 2011
- 224
-
Study on Relief Valve with Permanent Magnetic SpringSi, G.L. / Yang, F.Y. / Wang, W.J. / Liu, Y.H. et al. | 2011
- 228
-
Design of Portable ECG TesterFu, X.H. / Lin, H.R. / Ouyang, S.L. / Song, W.B. et al. | 2011
- 232
-
An Optimal Design Method for Radar BracketsGuo, L.Z. / Yang, D. / Huang, Z.T. et al. | 2011
- 237
-
Artificial Neural Network for Predicting Wear Properties of Brake Lining MaterialsHan, J.H. / Wu, Q.S. et al. | 2011
- 241
-
A Bayesian Network Based Approach to Defect Prediction in New Product DevelopmentSong, W.Y. / Ming, X.G. / Wu, Z.Y. / Xu, Z.T. / He, L.N. et al. | 2011
- 246
-
An Experiential Calculation Method to Radial Extrusion Pressure by Floating-DieXin, X.R. / Shan, L.L. / Liu, X.C. et al. | 2011
- 253
-
Research on the Pressure Fluctuation of Ceramic Filter Backwash Based on AccumulatorZhang, S.W. / Hu, Z.J. / Han, J. / Zhao, J. et al. | 2011
- 260
-
Mechanical Products' Function and Structure Modeling Based on the KnowledgeXin, Z.J. / Zhang, Y.Y. et al. | 2011
- 264
-
A Globalizing Manufacture and Information Sharing System Based on Network PlatformYang, X. / Ding, S.T. et al. | 2011
- 270
-
The Development of Friction Material Tester with Adjustable Speed and PressureWang, Z.Y. / Wang, T.S. / Qu, B. et al. | 2011
- 274
-
Template-Based Expression and Reuse of Design KnowledgeLu, C.M. / Zheng, S. / Jin, W. / Sheng, Y.F. / Sun, Y. et al. | 2011
- 279
-
Products Information Inheritance Based on Object-Oriented TechnologyWang, Y. / Ai, Q.S. et al. | 2011
- 283
-
Design of Paving Equipment for Coiled Waterproof Material on BridgeLiu, W.X. / Shan, G.L. / Chen, H.B. et al. | 2011
- 287
-
Construction and Application of the Patent Knowledge System for Supporting Product InnovationGong, J.W. / Li, W.Q. / Li, Y. / Liu, X. et al. | 2011
- 291
-
Research of NC Automatic Programming Based on Process Features RecognitionTao, J.H. / Yang, X.Q. / Liu, X.C. / Zhu, M.Y. et al. | 2011
- 300
-
Study on Thermal Analysis of Main Mirror in Space Solar TelescopeLi, R. / Shi, H.L. / Chen, Z.P. et al. | 2011
- 305
-
The Dynamic Simulation of Vibration Process of the Top Drive System of the JDD-100 Type Drilling Rig Based on ADAMSYu, P. / Xiao, Z.H. / Wang, Y.H. / Liu, D.Y. et al. | 2011
- 309
-
Innovative Design of an Automatic Train Picking Hook Device Based on TRIZWu, T.Y. / Li, W.Q. / Li, Y. et al. | 2011
- 314
-
Discussion of Design Ideas in Product Development Design Based on Product Extension in MarketingLong, S.J. / Huang, S.H. et al. | 2011
- 318
-
Theoretical Study on the Microwave Assisted Reversal of Magnetic Moment for GrainingLi, S.M. et al. | 2011
- 322
-
Layout Optimization of Support Structure Based on ANSYSGuo, L.Z. / Yang, D. / Chen, X.R. / Huang, Z.T. et al. | 2011
- 327
-
Numerical Simulation of Three-Dimensional Temperature Distribution in the Supercharged Boiler FurnaceLi, Z.G. / Zhou, G.Y. et al. | 2011
- 332
-
The Effect of Normal Curvature of the Free Surface on the Cutting WidthWang, M.H. / Li, X.P. / Sun, L. / Sun, Y. et al. | 2011
- 336
-
Analysis and Research on Fractal Model of Normal Contact Stiffness of Joint InterfacesLan, G.S. / Zhang, X.L. / Ding, H.Q. / Wen, S.H. / Zhang, Z.Y. et al. | 2011
- 346
-
Forming Technology of Spiral Micro-Groove in PlaneXiang, J.H. / Zhang, C.L. / Jiang, F. et al. | 2011
- 350
-
Development of Structural Health Monitoring Software System of Shanghai Center TowerZhou, Z.H. / Zhang, Q.L. / Yang, H.Z. / Chen, L. et al. | 2011
- 354
-
Innovative Design and Simulation for a Novel Vane PumpHuang, S.B. et al. | 2011
- 360
-
Solid Modeling of Spatial Cam with Oscillation Roller FollowerRen, A.H. / Sun, G.X. / Sun, C.Q. et al. | 2011
- 364
-
Effects of Laser Multiple Processing on Properties of Heat-Resistant SteelRuan, L. / Ren, X.D. / Huangfu, Y.Z. / Zhang, Y.K. et al. | 2011
- 368
-
Study on Application of Critical Path to Project Time ManagementDai, L.X. / Li, Z. et al. | 2011
- 372
-
A New Technique for Preparation of Two-Phase Foam Materials for Controlling Mine Dust and its ApplicationWang, H.T. / Wang, D.M. / Ren, W.X. et al. | 2011
- 376
-
Effects of Laser Shock Processing on Fatigue Lives of Heat-Resistant Steel and Estimation of Fatigue Safe LivesHuangfu, Y.Z. / Ren, X.D. / Ruan, L. / Zhang, Y.K. / Jiang, D.W. et al. | 2011
- 380
-
Mathematical Model for Evaluating Roundness Errors by Minimum Circumscribed Circle MethodLiu, P. / Miao, H.Y. et al. | 2011
- 384
-
Invention of Nano-Material Synthesis Process Equipment via Vapor-Phase TechnicsZhang, M.Z. / Wang, Q. et al. | 2011
- 388
-
Design and Realization of a Flexible Claw of Rough Wall Climbing RobotChen, D.L. / Zhang, Q. / Liu, S.Z. et al. | 2011
- 393
-
The Research of GPRS-Based Remote Fault Monitoring System for CNC Machine ToolsWu, M.L. / Wang, X.B. / Yu, S.R. et al. | 2011
- 398
-
An Algorithm for Best-Fit of a Pattern of Profile Features to the True ProfileLiang, S. / Li, M. / Yang, H. / Zhao, X.F. et al. | 2011
- 404
-
Genetic Algorithm Based on Simulation for Single Machine Scheduling Problem with Setup TimesLiu, M.H. / Li, Z.H. / Chen, J.R. et al. | 2011
- 408
-
Virtual Prototype Co-Simulation of 4WS VehicleWang, W.W. / Xu, J.F. et al. | 2011
- 412
-
Numerical Analysis on Surface Stress of Rectangle Piston Ring with Chromium CoatingYe, Z.B. / Qu, S.G. / Wang, G.H. / Xia, W. et al. | 2011
- 416
-
Study on Intelligent Manufacturing System Model of Iron and Steel Enterprises in Ubiquitous Information EnvironmentLiu, J.W. / Kong, J.Y. / Zhou, M. / Wang, X.D. / Xiong, H.G. / Li, G.F. et al. | 2011
- 421
-
The Green Design for the Moving Device of the Silt Coal Load MachineMao, P.H. / Zhai, B. / Chen, R.D. et al. | 2011
- 426
-
Numerical Simulation of Heat Transfer and Fluid Flow in Glass Tank Furnace after BubblingQi, Z.H. / Sun, B.H. / Xu, L.Y. et al. | 2011
- 431
-
A Novel Anti-Blockage Indicator in AirportHu, J. / You, L. / Jia, S. et al. | 2011
- 435
-
The Design and Size Optimization of the New FCEV Subframe Based on Hypermesh PlatformLiao, J. / Shan, L. / Feng, Y. et al. | 2011
- 441
-
SPH Method Based on Bird Impact Numerical Simulation of Aircraft Engine FanHou, B.D. / Xu, Y. / Yang, J.H. / Peng, L.C. et al. | 2011
- 446
-
Modeling and FEM Analysis for Interference between Tool Shank and Shrink Fit ToolholderJiang, F.L. / Liu, Z.Q. / Liu, G. et al. | 2011
- 451
-
Study on Contact Force of Tooth Profile ModificationMa, Y. / Huang, Q. / Lou, Z.F. / Li, K.H. et al. | 2011
- 457
-
Geometrical Models for Precision Grinding Aspherical MouldHan, C.S. / Zhang, Q. / Huang, Z. / Sun, T. et al. | 2011
- 462
-
Prediction of Microstructure and Mechanical Properties of Plate in Roller QuenchingWang, C. / Li, J.D. / Yuan, G. / Wang, Z.D. / Wang, G.D. et al. | 2011
- 466
-
Study on Quality Control and Evaluation Methods of Development of Complex Product SystemYang, L.E. / Zheng, L. / Ding, S.T. et al. | 2011
- 470
-
Experimental Study on Cryogenic Cutting of High-Strength Steel with Liquid Nitrogen CoolingLi, S.J. / Hu, Y.K. / Jiang, X. / Du, J. et al. | 2011
- 474
-
A Study on the Characteristics of Micro Electropolishing for Stainless SteelKim, S.H. / Lee, S.G. / Choi, S.G. / Lee, E.S. / Choi, S.B. / Lee, C.H. et al. | 2011
- 478
-
Application of CAD/CAM Technology in the Development and Lofting of Complex Sheet Metal PartsLi, F.S. / Han, Z.S. et al. | 2011
- 483
-
Experimental Research on the Dynamic Characteristics of the Milling Vibration in High-Speed Milling of the Thin-Wall ComponentsLi, L. / Liu, D.F. et al. | 2011
- 487
-
Analysis on Fiber Laser Welding of MS1470 SteelLi, Y.J. / Xin, L.J. / Wang, Z.Y. et al. | 2011
- 492
-
Parametric Study of Welding Temperature Distribution in T-Joint Fillet Weld Using FEMAsifa, K. / Li, H. / Li, L. / Khurram, S. et al. | 2011
- 497
-
Based on Ansys Drillwell Hook DG450 Strength AnalysisYu, H.L. / Mu, X.Q. / An, M.L. et al. | 2011
- 502
-
Modeling and Experiment of Pulse Electrochemical Deburring on Inclined Exit Surface of Drilling HoleMa, N. / Xu, W.J. / Wei, Z.F. / Pang, G.B. et al. | 2011
- 507
-
Formation of Side Electrode on Quartz MEMS-Based Double-Ended Tuning Fork Using Enhanced Lift-Off ProcessLiang, J.X. / Li, X.F. / Ni, Y.F. / Li, H.S. / Huang, L.B. / Li, K.Y. et al. | 2011
- 511
-
Drawing and CNC Software System for Light Gage Steel StructureChang, Z.G. / Yang, H.Z. / Zhang, Q.L. et al. | 2011
- 515
-
Active and Passive Deformation of Large Thin-Walled Workpiece in Heat Treatment ProcessLu, Y. / Kang, J.W. / Nie, G. / Huang, T.Y. et al. | 2011
- 520
-
Direct Rapid Manufacturing Technology with Laser for Metal PartsJin, Y.P. / Hu, M. et al. | 2011
- 524
-
Hyperparameter Estimation Based on Gaussian Process and its Application in Injection MoldingMa, J.Y. / Liao, X.P. / Xia, W. / Yan, X.L. et al. | 2011
- 530
-
A Research on the Measurement of Friction Coefficient of Plastic Forming by Floating Die ExtrusionXin, X.R. / He, C.S. / Shan, L.L. et al. | 2011
- 538
-
Research on Logistics Management Information SystemWang, Q.J. / Guo, C.L. et al. | 2011
- 542
-
A Computer Aided Testing System for an Aero Turbo-Shaft EngineLi, C.Z. / Lei, Y. et al. | 2011
- 547
-
Adsorption Characteristics of Superplasticizer with Waste Plexiglas (WPS) onto Cement Particle SurfaceZheng, G. / Wang, R.M. / Zhao, G.Y. / Yu, Z. et al. | 2011
- 551
-
Design and Research of Slotting Modification Profile for High-Speed and Heavy-Loading Marine GearChen, C.G. / Hu, L.B. / Yuan, F.W. / Hu, Y.B. et al. | 2011
- 556
-
Study on Extension Functional Integration and Benefit of Electric VehicleZhou, Y.H. et al. | 2011
- 560
-
Analysis of Cutting Forces and Machining Error in Ball End Milling of Cylindrical SurfacesOuyang, B.S. / Lin, G.X. / Tang, Y.H. et al. | 2011
- 565
-
Microstructural Characterization of Ni-Al Alloyed Layer under Laser Rapid Solidification ConditionYang, Y. / Wu, H. et al. | 2011
- 569
-
The External Circular Precision Detection of Precision Machining Zirconia Ceramics SpindleLu, F. / Chen, S.C. / Bao, Y. / Zhang, K. / Wu, Y.H. et al. | 2011
- 574
-
Slotting Profile Modification Technology and Generating Simulation's MATLAB Implementation for Heavy-Loading Mine GearHu, L.B. / Li, S. / Yuan, F.W. / Li, B.W. / Chen, C.G. et al. | 2011
- 579
-
Study on Influences of Superplasticizer with Waste Plexiglas (WPS) on Cement Paste and MortarZheng, G. / Wang, R.M. / Zhao, G.Y. / Yu, X.J. et al. | 2011
- 583
-
Research for Tooth Profile Modification Technology and Slotting ProcessChen, C.G. / Hu, L.B. / Hu, Y.B. / Li, S. et al. | 2011
- 587
-
Present Status of Fault Injection Research for Testability Demonstration and EvaluationZhao, J.Y. / Li, X.M. / He, Y. et al. | 2011
- 591
-
The Research Based on the Movement Control CARDS of NC MachiningLi, L.B. et al. | 2011
- 595
-
Study on Small-Diameter Deep-Hole Vibratory Drilling of Difficult-to-Cut MaterialsXu, X.S. / Sun, Z.Y. et al. | 2011
- 600
-
Study on Method of Overcoming Adverse Effects of Radar Blind Zone on Large Fleet in the Three Gorges ReservoirXie, S.P. et al. | 2011
- 606
-
The Development of Graphic Design Method Based on Pro/Toolkit Spur GearsShen, Z.K. / Pan, X.L. et al. | 2011
- 610
-
Research on Structure Analysis of a Feeder Based on ANSYSZhang, Y.Y. / Zhu, M.M. et al. | 2011
- 614
-
Power Batteries Pack Test System Based on GPIB ProtocolLv, L.Y. / Min, Y.J. et al. | 2011
- 619
-
Design and Manufacturing of Complex Surface Impeller Based on RELi, Z.Y. / Huang, M.Y. / Hu, H.J. / Ni, H.J. / Zhu, Y. / Jia, Z.S. / Wen, P.P. et al. | 2011
- 624
-
Based on Bearing Centerless Strengthening and Polishing Processing Multiple Collision Finite Element Simulation AnalysisOu, Y.F. / Liu, X.C. / Liu, C.J. / Li, W.X. / Wang, H. et al. | 2011
- 628
-
A Simulation Study on Translational Piston Air CompressorGeng, K.H. / Tang, M. / Yu, H.D. / Geng, A.N. / Du, S.G. et al. | 2011
- 633
-
Trajectory Designing and Realizing for the Variable Structure Motorcycle HelmetGeng, A.N. / Li, X.M. / Xie, Y.X. et al. | 2011
- 638
-
Numerical Simulation of Welding Distortion under Different SequencesLiu, Y. / Wang, D.P. / Zhang, H. et al. | 2011
- 642
-
Research on the Modeling and Simulation of Vehicle R&D Process Based on Petri NetWang, H. / Lv, S.Y. et al. | 2011
- 648
-
Rare Earth Superfine Powders Fabrication and Characterization by Novel Non-Ball MillerLi, K.S. / Mo, Y.M. et al. | 2011
- 654
-
Optimal Design Grape Rain Shed Based on CFD and GSCADWang, J. / Yang, H.B. et al. | 2011
- 658
-
The Use of Rapid Prototyping to Fabricate Liver Tissue Engineering ScaffoldSekou, S. / Zhong, S.Y. / Sun, Z.Z. et al. | 2011
- 662
-
Simulation Model of Traction Systems for CRH2 EMU Based on PSCAD/EMTDCMa, F.Y. / Li, H.W. / Han, B.G. / Xu, J.Z. et al. | 2011
- 667
-
The Design of New Water Jet Spray GunZhao, X.W. / Zhang, X.Z. / Zhao, X.H. et al. | 2011
- 672
-
W722 Lathe of Fault Detection and DiagnosisLou, B.C. et al. | 2011
- 677
-
A Fast Scanning Algorithm for Extension Velocities in Level Set MethodsOuyang, G.F. / Kuang, Y.C. / Zhang, X.M. et al. | 2011
- 681
-
The Comprehensive Study on Virtual ManufacturingJi, C.J. et al. | 2011
- 685
-
Finite Element Analysis and Experimental of Milling Force for Aeronautical Thin-Walled WorkpieceYu, J. / Shi, Y.X. / Yang, G.W. et al. | 2011
- 690
-
Finite Element Analysis and Structure Design for Chassis of Aircraft Towbarless TractorXing, Z.W. / Lv, Y. / Li, J.H. et al. | 2011
- 695
-
Influence of Slide Stroke Curves on Deep Drawing of Box Shaped PartXu, T. / Xia, Q.X. / Zhang, S.J. / Li, Z.S. / Ruan, W.P. et al. | 2011
- 700
-
Analysis on Dynamic Characteristics of HTC100 NC Lathe BedLu, M.W. / Zhang, G.M. / Zhao, W.Q. et al. | 2011
- 704
-
The Development and Utilization of Nuclear Power from the Perspective of National Economic SecurityMin, Z.H. et al. | 2011
- 708
-
Diffusion Channel of Generic Technology in Equipment Manufacturing IndustryYu, Z.H. et al. | 2011
- 717
-
Research on JIT Production Logistics Management SystemSu, W.G. / Qin, P.P. / Li, L. / Huang, X. et al. | 2011
- 721
-
Causes of Cracks of External Wall InsulationOuyang, C.B. / Chen, Y. / Wang, Y. et al. | 2011
- 726
-
Ergonomically Designed Kneeling Chair Influence on Adolescent Idiopathic ScoliosisWang, F. / Feng, X. et al. | 2011
- 730
-
Numerical Simulation and Analysis of High-Strength Steel Autobody Panel StampingZhao, D.X. / Tang, Y.J. / Pei, Z.H. et al. | 2011
- 734
-
The Analysis and Treatment to Lube Oil Separator's LeakageSun, S.Y. / Zhang, G.Y. et al. | 2011
- 738
-
Research on Realization Mechanism of Case-Based Reasoning System Facing the Industrial DesignZhang, W. et al. | 2011
- 743
-
Research and Design of Box-Taking Mechanism in Automatic CartonerCao, J.J. / Li, L. / Tian, X.H. et al. | 2011
- 747
-
Surface Texturing for Crystalline Silicon Solar Cell Using RIE Equipped with Metal-MeshKong, D.Y. / Cho, C.S. / Jo, J.H. / Kim, B.H. / Lee, J.H. et al. | 2011
- 751
-
Hazardous Chemicals Transportation Risk Control Based on Goal ProgrammingLiu, L.P. / Fan, T.J. / Xia, H.Y. et al. | 2011
- 755
-
Experimental Study on Fretting Wear Behavior of Steel Worm Gear PairLi, Z.J. / Chen, Z.Y. / Chen, X.M. / Li, Y. et al. | 2011
- 760
-
Value Optimization of the Existing Public Building Energy-Saving Renovation Based on AHP and Improved VEYu, H.G. et al. | 2011
- 767
-
Research on NC Process Information Integration Method Based on Database and Heterogeneous CAM Programming PlatformsZhu, M.Y. / Tao, J.H. / Liu, X.C. / Liu, H. et al. | 2011
- 771
-
Method for Design of Integral Shaped Milling Cutter ProfileSun, Q.Y. / Wang, Z.W. / Shan, Y.X. / Bai, Y.F. et al. | 2011
- 775
-
Study on Information System of Rolling Mill Equipments Management Based on WebTang, Y.H. / Zhang, H.Y. / Lin, G.X. et al. | 2011
- 779
-
Design for the Resistance Automatic Adjustment System of Multifunctional Interactive Fitness BikeLi, D.W. / Long, Z.J. / Chen, X.M. et al. | 2011
- 783
-
Cooperative Optimal Method for Two Level Models of Micro DeviceLiu, Z. / Chen, H. et al. | 2011
- 788
-
Design of Injection and Recycling Integrated System Used in the Strengthening and Polishing of Bearing RingLi, W.X. / Liu, X.C. / Liu, C.J. / Wang, H. / Ou, Y.F. et al. | 2011
- 792
-
Study on Logistics Management Platform FunctionWang, Q.J. / Wang, S.J. et al. | 2011
- 796
-
Study of Acoustic Emission of Wheel Passivation for Cermet Based on Super-Speed GrindingGuo, L. / Du, H.B. / Sheng, X.M. / Peng, K.L. / Jin, T. / Wu, Y. et al. | 2011
- 801
-
Contact Analysis and Optimization of a New Type of Propeller Shaft-Hub Connection StructureLi, W.J. / Sun, H. / Chen, R.X. et al. | 2011
- 806
-
A Simple Closure Device of Isolating Explosion SwitchZhang, W.G. / Li, P. / Ge, W.H. et al. | 2011
- 810
-
Research and Development on Miniature Teaching Computer Numerical Control Lathe MachineZhang, H.Y. / Zhao, Y.G. / Zhao, G.Y. / Li, Y.R. / Si-Ma, Z.W. et al. | 2011
- 814
-
Analysis on Option Value of Supplier Involvement in Collaborative DevelopmentZhang, Z.J. / Pan, H. et al. | 2011
- 820
-
Research on Quality Control Flows and Techniques of Software Project ManagementRen, Y.C. / Jiang, D.Y. / Xing, T. / Zhu, P. et al. | 2011
- 824
-
Design and Numerical Analysis of the Internal Suction Flow Heat SinkJiang, F. / Zhang, C.L. / Xiang, J.H. et al. | 2011
- 828
-
Study on the Rapid Progressive Die Design of Sheet Metal with Free Form SurfaceLi, X.D. / Zhan, X.H. et al. | 2011
- 837
-
Tribological Applications Considering Roughness Effects on Grain FlowTsai, H.J. / Horng, J.H. / Tsai, H.C. / Huang, P.Y. et al. | 2011
- 843
-
Determination of Residual Stress of Hard Film/Soft Substrate Specimens via Unloading Results of Nanoindentation TestsNguyen, H.H. / Wei, P.J. / Lin, J.F. et al. | 2011
- 849
-
A Design of Forming Dies for a Manifold of Airbag InflatorLin, H.S. / Tsai, S.C. / Hsu, Y.C. / Hsiao, M.C. / Ke, C.C. / Lee, B.Y. et al. | 2011
- 853
-
Thermal Shock Performance of Al~2O~3/TiO~2 Air Plasma Spray CoatingsYao, S.H. / Su, Y.L. / Kao, W.X. et al. | 2011
- 857
-
Processing and Crystal Microstructure of Porous High Pressure Crystallized Nanodiamond/UHMWPE Biomedical NanocompositeChou, C.C. / You, J.H. / Wu, C.L. et al. | 2011
- 861
-
Influence of Pulsed-DC Power Frequency on Mechanical Properties and High Speed Drilling Application of a-C:H:Zr-x CoatingsKao, W.H. / Su, Y.L. / Yao, S.H. / Liu, S.H. et al. | 2011
- 868
-
Sensitivity Analysis of Magnetic Abrasive Finishing Process ParametersChang, F.M. / Tsai, T.H. / Chiang, S.H. et al. | 2011
- 881
-
The Physical Characteristics of Bio-Oil from Fast Pyrolysis of Rice StrawYang, S.Y. / Wu, C.Y. / Chen, K.H. et al. | 2011
- 887
-
Topology Structure Design of 12 Flapping-Wing MechanismsHsu, M.H. / Chen, H.Y. / Weng, T.S. / Liu, F.C. et al. | 2011
- 892
-
On the Study of Non-Engineering Students Applied Open Source for Learning Graphic Design Skills of Dynamic 3D Motocross Suspension MechanismWeng, T.S. / Hsu, M.H. et al. | 2011
- 896
-
Study on Surface Parameters of Asperity Flattening in Sliding Contact for Metallic Thin Film on Die Material during Metal FormingYang, T.S. / Li, S.Q. / Chang, S.Y. et al. | 2011
- 900
-
Optimal Design of Polishing Trace for Link-Type Optical Fiber PolisherHsieh, L.C. / Chen, T.H. et al. | 2011
- 906
-
The Tungsten Density Distribution and Tribological Performance Analysis of Carburized Medium Carbon Steel with Tungsten Ion ImplantationChu, H.Y. / Lin, J.F. / Chiu, Y.C. / Chang, H.C. et al. | 2011
- 910
-
Stress-Induced Phase Transformations of Micro-Crystalline Silicon Films Arising at NanoindentationsHan, C.F. / Lin, J.F. et al. | 2011
- 915
-
Kinematics Simulation and Optimization for the Mechanism of 5R-PLi, W. / Tsai, G.C. / Hsu, B.S. / Li, W.Z. et al. | 2011
- 920
-
Fire Safety Assessment Research for High-Tech PlantsWang, Y.L. / Chang, Y.M. / You, M.L. / Chen, K.Y. / Lin, C.P. / Shu, C.M. et al. | 2011
- 925
-
Study of Vibration Fault Diagnosis on TRTZheng, W. / Wei, X.B. et al. | 2011
- 929
-
Study on the Effect of Slope Stability by Bedrock Softening under the Condition of Strong Rainfall InfiltrationYang, Z.G. / Jiang, L. / Wu, H.Z. et al. | 2011
- 933
-
The Development of Embedded Rotating Machine Fault Diagnosis System Based on Qt/EmbeddedZhou, Z.M. / Zhang, C.L. / Xiong, Y.H. et al. | 2011
- 939
-
The Find-Forming of Transmission Line in ANSYSKong, W. / Zhu, M.W. / Sheng, Z.L. et al. | 2011
- 943
-
Based on Entropy Weight and Fuzzy Comprehensive Evaluation Ecological Benefits of the Project-Analysis on Cold-Formed Thin-Walled Steel Residential StructureZhang, Q. / Wang, B. / Liao, F.W. et al. | 2011
- 948
-
Analysis on Effects of Fuel Cam on High-Pressure Fuel SystemLi, M.H. / Liu, B. / Ning, Y.B. et al. | 2011
- 953
-
Empirical Analysis of Performance of Public Organizations Based on DEA ModelWei, B. / Niu, W.D. / Luo, Y. et al. | 2011
- 957
-
Study on Advantage for Exploring Thin Sandwich by CPTUTang, Y.C. / Meng, G.T. et al. | 2011
- 961
-
Study on Figuring Technique on a Back-Strap Loom of Li NationalityLi, Q. / Li, B. / Yang, X.M. et al. | 2011
- 966
-
Studies on Curing Kinetics Parameter of TDI-PPG-MOCA Polyurethane by FTIRWen, Q.Z. / Yu, C. / Zhu, J.H. / Liu, T.Y. et al. | 2011
- 970
-
Study on Complex Adaptive Features of Enterprise NetworkShi, Y.G. / Yan, J.F. et al. | 2011
- 974
-
Heat Analysis of a Flat Permanent-Magnet Linear Synchronous MotorMou, X.J. / Xu, Y.T. / Jiang, F.J. et al. | 2011
- 979
-
Effect of Si Content of Al-Si Matrix on Roll Cast Wire Inserted StripHaga, T. / Takahashi, K. / Kumai, S. / Warari, H. et al. | 2011
- 984
-
Research on Technology Introduction and Innovation of Shanghai Modern Silk Reeling IndustryXiao, A.L. / Guo, X.M. et al. | 2011
- 989
-
Traffic Survey System Based on GPS, GPRS and GISYuan, Y. / Liu, Z.Y. / Xiang, H.K. / Ding, Z.F. et al. | 2011
- 998
-
Study of SARFT and Telecom Operators in IPTV Industry Chain Based on Evolution Game TheoryMa, L. / Ma, C.Y. et al. | 2011
- 1003
-
Analysis of the Energy Efficiency Grades Detection for Power TransformersDai, J. / Li, Z.H. et al. | 2011
- 1008
-
Fire Investigations and Analyses for a Typical Agricultural County in Yunlin, TaiwanWang, Y.L. / Chang, Y.M. / You, M.L. / Chen, K.Y. / Lin, C.P. / Shu, C.M. et al. | 2011
- 1013
-
Inverse Arithmetic of the Equivalent Heat Transfer Coefficient of Mine GoafHeng, S. / Gao, F. / Liu, X.G. et al. | 2011
- 1017
-
The Dynamic Response of the Clamped Beam under Low Velocity ImpactLong, W.G. / Tan, Z.H. / Liu, Y. / Wang, F.R. et al. | 2011
- 1022
-
Study on Efficient Approach on Cost Control in the Stage of Architecture Engineering DesignCui, C.Y. / Liu, Y. / Yu, N. et al. | 2011
- 1026
-
Study on Condition Assessment of Highway Bridge, Normal-Speed and High-Speed Railway BridgeWei, Z.L. / Pu, Q.H. / Wang, B.L. et al. | 2011
- 1031
-
Static Studies of a Steel Chain Ropeway Section Using Msc AdamsMwape, C.J. / Hong, T.S. / Wu, W.B. et al. | 2011
- 1037
-
The Web Classification Based on ROUGH-GA-BPDuan, L.Z. / Zou, Z.X. / Wang, G.F. et al. | 2011
- 1041
-
Efficient Design of a Torque Actuator for Lower Extremity Exoskeleton Based on Muscle Function AnalysisSafavi, S. / Ghafari, A.S. / Meghdari, A. et al. | 2011
- 1045
-
The Evaluating and Quantizing of Human Factors at WorkplaceLi, P.H. / Zhou, J. / Deng, J.X. / Fan, Z.J. et al. | 2011
- 1049
-
The Framework and Construction Rural Science and Technology Information SystemWang, S.R. / Zhao, J.S. et al. | 2011
- 1053
-
A Creative and Practical Study on the Theory of Developing Work ProcessZhong, C.Z. / Jiang, L.F. et al. | 2011
- 1057
-
Study on Preparation and Performance of MRF for Torque TransmissionDong, Z.X. / Guo, C.W. / Hou, Y.F. / Meng, Q.R. / Li, F.H. et al. | 2011
- 1062
-
Small Problem, Big Crisis: A Study on the Importance of Fire Separation in Tall BuildingsWang, Y.L. / Shu, C.M. et al. | 2011
- 1067
-
The Remote Fault Intelligent Diagnosis System Based on B/S StructureLiu, J. / Zhang, C.L. / Li, J. / Li, S. / Xiong, Y.H. et al. | 2011
- 1072
-
Amplitude Frequency Response Characteristics of Fe-Based Damping Alloy Simple Beams under Forced VibrationsHuang, S.K. / Zhou, D.C. / Liu, J.H. / Teng, J. / Li, N. et al. | 2011
- 1077
-
Toughness and Internal Friction of Weld Metal Welded by High-Current MAG WeldingPan, A.X. et al. | 2011
- 1082
-
The Involvement of Coloring Agent, Cu, and its Effects on the Optical Performance for Color GlassBai, X.H. / Hao, X.G. / Li, S.J. / Dai, L.P. et al. | 2011
- 1086
-
ABS Fabrics Chemically Plated by Cu/Ni-P as Electromagnetic Shielding MaterialYu, C.D. / Li, P. / Wang, Y.F. / Tang, L. et al. | 2011
- 1090
-
Service Life Prediction for the Neoprene Based on Tearing StrengthYu, C. / Wen, Q.Z. / Zhu, J.H. / Wei, Z. et al. | 2011
- 1094
-
Effect of Lorentz Force on Non-Axisymmetric Thermo-Mechanical Behavior of Functionally Graded Hollow CylinderFesharaki, J.J. / Golabi, S. / Atrian, A. et al. | 2011
- 1098
-
Relationship between Slip Resistance of Shoe Sole and Materials and Floor ConditionsJia, L.X. / Zhang, Q.F. et al. | 2011
- 1102
-
The Effect of Titanium Addition on Microstructure and Properties of Laves Phase Cr~2Nb Alloy Synthesized by Hot PressingXiao, X. / Lu, S.Q. / Dong, X.J. / Huang, M.G. / Liu, J.W. et al. | 2011
- 1109
-
Microwave Absorbing Properties of Radar Absorbing Structure Composites Filling with Carbon NanotubesZhang, Z.Q. / Wang, L.G. / Wang, E.Z. et al. | 2011
- 1113
-
Finite Element Analysis of X-Cor Sandwich's Shear ModulusDang, X.D. / Shi, S.J. / Jiang, J.S. / Xiao, J. et al. | 2011
- 1118
-
A Special Manufacture of Nanowires with High Precision and its Concrete ImplementZhe, W. / Xian, Q. / Fan, J.R. et al. | 2011
- 1122
-
The Application of Blast Furnace Slag in Cementitious Self-Leveling MortarYang, X.Y. / Li, C. / Wu, J.H. et al. | 2011
- 1127
-
Study on Phase Structure and Electrical Properties of La-Doped (K~0~.~5Na~0~.~5)~0~.~9~4Li~0~.~0~6NbO~3 CeramicsLiu, Y. / Chu, R.Q. / Xu, Z.J. / Chen, Q. / Shao, L. / An, K. / Li, G.R. et al. | 2011
- 1131
-
Study on Dielectric and Ferroelectric Properties of Gd-Doped Sr~2Bi~4Ti~5O~1~8 CeramicsChen, Q. / Xu, Z.J. / Chu, R.Q. / Liu, Y. / Chen, M.L. / Wang, X.H. / Ran, C.J. / Li, G.R. et al. | 2011
- 1135
-
A Rotary Magnetorheological Damper for a Tracked VehicleYang, L. / Chen, S.Z. / Zhang, B. / Feng, Z.Z. et al. | 2011
- 1139
-
Wet-Chemical Synthesis and Enhanced Photocatalytic Performance of ZnO/Ag Micro Hybrid MaterialMa, P.Y. / Wu, Y. / Fu, Z.Y. / Wang, W.M. et al. | 2011
- 1143
-
Creep Properties and Damage Study of Ni-Based Alloy C276 at High TemperatureMao, X.P. / Guo, Q. / Zhang, S.Y. / Hu, S.Y. / Lu, D.G. / Xu, H. et al. | 2011
- 1149
-
Effect of Mechanical Stirring on Microstructural Morphology in Semisolid A356 AlloyLiu, Z. / Liu, X.M. / Mao, W.M. et al. | 2011
- 1153
-
Defect-Related Photoluminescence from SiO~2 Thin Films by Si-Ge Ions DopedZhong, K. / Xia, Y.D. / Miao, J.H. / Fu, J. et al. | 2011
- 1157
-
The Critical Conditions of Ferroelectric Domain Switch with Different Porosity and PressureWu, J. / Li, W.F. et al. | 2011
- 1161
-
Study on Coating and Technological Conditions of LLM-105Wang, H.J. / Liu, S.S. et al. | 2011
- 1167
-
Effect of Air Position to the Mechanism of Air-Decked BlastingWu, L. et al. | 2011
- 1172
-
Analysis of Temperature Field on Infrared Active Detection of Heavy Pressure Vessels Wall Surface DefectWu, G.Z. / Song, F.F. / Li, D. et al. | 2011
- 1177
-
Research for Damping Behavior and Microstructure of Interpenetrating Polymer Networks Based on Multi-ComponentsLi, Y.Q. / Zhu, X. / Luo, Z. / Sun, W.H. et al. | 2011
- 1182
-
Fabrication and Application of CVD Diamond-Coated Copper Wire Drawing DieTang, Q.S. / Yang, Y.H. et al. | 2011
- 1188
-
Numerical Calculation on Flaw Response in Inhomogeneous MediaZheng, G.F. / Wu, B. / He, C.F. et al. | 2011
- 1194
-
Optical and Electrical Properties of Sol-Gel TeO~2-SiO~2 Composite FilmsGan, P. / Xian, X.D. et al. | 2011
- 1198
-
Solution-Based Doping of Cobalt into ZnO Nanorods MembraneMa, P.Y. / Wu, Y. / Fu, Z.Y. / Wang, W.M. et al. | 2011
- 1202
-
Application of Moldflow in Gas-Assisted Injection MoldingZi, K.M. / Chen, L.H. et al. | 2011
- 1206
-
Efficiency Comparison of some Natural Products on Corrosion Inhibition of Al-Mg-Si AlloyRosliza, R. / Nik, W.B.W. / Izman, S. et al. | 2011
- 1210
-
Stability Analysis of Cracks in the Stress-Release Boot of Solid Rocket Motor Grain with J-IntegralMeng, S.Y. / Han, J.L. / Liu, C.S. / Yang, X.H. et al. | 2011
- 1216
-
Design of Mobile Jumping Robot Based on DSP2407Fu, X.H. / Mu, J. et al. | 2011
- 1220
-
The Deposition Rate of Ti Film by PlasmaHuang, S.H. / Lai, Q. et al. | 2011
- 1224
-
Research on Changing Regularity of Green Sand PropertiesSun, Q.Z. / Jing, J. / Zhang, P.Q. / Huo, Y.S. / Zhao, Z.K. / Wang, J. et al. | 2011
- 1228
-
Experiment of Gray Iron Abrasive Wear for Wheat Grain PowderZhang, K.P. / Huang, J.L. / Wu, J.F. et al. | 2011
- 1232
-
Effect of Nano-Filler Network on the Rheological Behaviours of Poly(vinylidene fluoride) NanocompositesTang, X.G. / Hou, M. / Zou, J. / Truss, R. et al. | 2011
- 1239
-
Exploration of the Defect's Effect on the Mechanical Properties of Different Orientated NanowiresZhan, H.F. / Gu, Y.T. et al. | 2011
- 1245
-
Two High-Speed and Large-Drive-Current BiCMOS Analog SwitchesCheng, L. / Xi, J.J. / Li, N. / Yang, N. et al. | 2011
- 1249
-
The Key Technology in the Parallel Control of InverterQin, J.Y. / Wang, Q. / Zhou, J.H. et al. | 2011
- 1253
-
Study on Thermodynamic Principle of Preparation of VC by Carbon-Heat ReducingLi, Z.R. / Cao, Z.Q. / Fang, M.X. et al. | 2011
- 1259
-
The Preparation of Mica Composite Insulation Material with Starch Adhesive and its Modified EnhancementQian, Y.P. / Zhang, X.W. / Zhu, Y.B. et al. | 2011
- 1263
-
Preparation and Performance of RTV Coating for Anti-Pollution Flashover with Superhydrophobicity by Filling CaCO~3/SiO~2 Composite Particles into Silicone RubberHai, J. / Yang, J.X. / Cheng, J. / Yang, Z.R. et al. | 2011
- 1268
-
Effect of Alloy Powder for WC/Steel Base Surface Composite Structure and InterfaceSui, Y.D. / Jiang, Y.H. / Li, Z.L. / Shan, Q. / Liu, F. et al. | 2011
- 1272
-
Experimental Study on CTOD Fracture Toughness of Welded Joints of Low Temperature SteelFang, Z.T. / Sun, B. / Li, C.R. et al. | 2011
- 1277
-
Fabrication and Properties of Al~2O~3 Short Fiber Reinforced Aluminium Matrix CompositesYang, Y.S. / Feng, K. / Zhao, W.X. et al. | 2011
- 1281
-
Research on the Stress Fatigue Assessment about the Hot Spot Stress on the Bogie FrameWang, B.J. / Li, Q. / Liu, Z.M. et al. | 2011
- 1287
-
Comprehensive Evaluation on Technical Economic Performance and Scheme Optimization for Asphalt MixtureChen, Z.D. / Xing, L. / Wang, W. et al. | 2011
- 1292
-
Research of Properties and Microstructure on High-Strength Casting of Turbo-ChargerPan, A.X. et al. | 2011
- 1297
-
Property and Application of Austempered Ductile Cast IronLuo, G.S. et al. | 2011
- 1301
-
Research on Polypropylene Fiber and Mineral Admixtures on Fluidity of Cement-Based MaterialsLi, X.F. / Guo, T. et al. | 2011
- 1305
-
The Formation of Super-Thin Dielectric Film on Porous Substrate and its Stopping - Transmittance Characteristics for ParticlesChen, L. / Li, Y. / Qin, X.L. / Wu, K. / Jiang, D.L. / Tian, J.Q. et al. | 2011
- 1309
-
Experimental and Numerical Study on Six- Point Bending Test of a Composite Stiffened PanelYe, Q. / Xiao, S.S. / Chen, P.H. et al. | 2011
- 1313
-
A Method of MEMS Package Using Local Laser BondingCheng, L. / Zhang, Y.X. / Xu, J. / Yan, M. et al. | 2011
- 1317
-
Investigation on the Load Capacity and Failure Process of T-Joint by Experiments and Numerical MethodHu, P. / Shao, Q. / Nie, Q. / Li, W.D. et al. | 2011
- 1322
-
Realization of the Internet Based Telecooperation Robot SystemFu, X.H. / Ouyang, S.L. et al. | 2011
- 1326
-
Synthesis and Properties of a Modified Sponge Iron for Removing Dissolved OxygenXu, B. / Jia, M.C. / Men, J.F. et al. | 2011
- 1331
-
Influence of Crack Depth on Chloride Transport of Cracked Self-Compacting Concrete under Non-Steady State Migration TestMu, S. / De Schutter, G. / Ma, B.G. et al. | 2011
- 1335
-
Preparation and Properties of Halogen-Free Flame Retardant Epoxy Resins with Aryl Phosphinate Dianhydride HardenerLiang, B. / Bao, T.Z. / Cao, J. / Hong, X.D. et al. | 2011
- 1339
-
The Effect of Preparation Conditions to Crystall of Ti FilmLai, Q. / Huang, S.H. et al. | 2011
- 1343
-
Experimental Study on Synthesis of High Purity MulliteShi, Z.W. / Xie, N.S. et al. | 2011
- 1347
-
Leaching and Detecting Free Magnesium Chloride for Magnesium Oxychloride CementLi, Y. / Yu, H.F. et al. | 2011
- 1351
-
Experimental Study on the Anti-Cracking Property of Basalt Fiber for Cement-Based MaterialsHe, J.Y. / Huang, X.Q. / Tian, C.Y. et al. | 2011
- 1355
-
Study on the Preparation of Nano-Cu~2O and its Morphology ControlZhao, B. / Ma, D. et al. | 2011
- 1359
-
Fatigue Analysis of Pure Waterjet Nozzle-A CFD and FEA ApproachLi, Q.C. / He, K. / Du, R.X. et al. | 2011
- 1365
-
Preparation and Microstructure of Co-Ferrite Fine PowderZhang, C.S. / Yang, L. / Zhou, F. et al. | 2011
- 1369
-
The Manufacturing of the Bamboo Buffer Packaging MaterialLiu, Y. / Wang, S.H. et al. | 2011
- 1373
-
The Influence of Loading Rate on the Interfacial Fracture Toughness of Carbon Fiber-Metal Laminates Based on Magnesium AlloyZhu, G.Z. / Zheng, C.L. / Lu, X.F. et al. | 2011
- 1377
-
Research on Impact Factors of Thermal Insulation Material Based on Grey Relational AnalysisZhao, X.G. / Zhou, Y. / Pan, S.X. et al. | 2011
- 1381
-
Magnetorheological Fluid and Design of Magnetorheological DevicesXiong, C. / Zheng, J. / Fang, L.Q. / Ma, C.T. et al. | 2011
- 1386
-
The Influence of Friction on Forming Accuracy of Tubular Parts by Hydroforming with Radial CrushingYang, L.F. / Lei, P. / Guo, C. et al. | 2011
- 1391
-
The Influence of Phase Transformation Cycling on Improving of Plasticity and Microstructure of Fe-14Mn-4Si-8Cr-4Ni AlloyXie, W.L. / Zhou, S.Y. / Guo, C.X. / Pei, Y.Y. / Wen, Y.H. et al. | 2011
- 1395
-
Thickness Optimization of SPF for Titanium Alloy Negative Angle PartsShao, Z.K. / Huang, Z.G. / Jin, S.Y. / Yuan, Q.H. / Zhou, Y. et al. | 2011
- 1403
-
Deformation Behaviors of Tube Rotary-Draw Bending Filled with Steel BallsShi, S.C. / Yang, L.F. / Guo, C. et al. | 2011
- 1408
-
Physico-Chemical Properties of Edible Gelatin Film from Arrowtooth Flounder (Atheresthes Stomias) SkinLi, J.W. / Zhao, Q.C. / Wang, B.B. et al. | 2011
- 1413
-
The Surface Hydrophilicity of Polypropylene Non-Woven Treated by Atmospheric Glow PlasmaZhang, Y. / Liu, R.J. / Shang, Z.X. / Lv, Y.D. / Gu, B. et al. | 2011
- 1417
-
Finite Element Simulation of Temperature Field on Laser Cladding Layers Regulated by Micro-ForgingZhou, J. / Qiu, C.J. / Cheng, X.Y. et al. | 2011
- 1421
-
Different Thickness of Honeycomb Paperboard Vibration Frequency of Testing and SimulationWang, B.Z. / Cao, L.J. et al. | 2011
- 1425
-
Design of the Inversion Power-Supply Control System Based on DSPWang, Q. / Qin, J.Y. / Qin, X. et al. | 2011
- 1431
-
Design of New Metal DetectorFu, X.H. / Xu, L.B. et al. | 2011
- 1436
-
Improved Rotative Mid-Point Mensuration and Newton-Raphson Method in 2-D Flat Rolling SimulationSong, S.N. / Liu, J.Y. et al. | 2011
- 1440
-
Nonlinear Cumulative Fatigue Damage ModelZou, H. / Li, Q. / Sun, S.G. et al. | 2011
- 1445
-
The Effect of Cerium Substitution on Electromagnetic Properties of NiZn FerritesZhong, H. / Yang, J. / Wang, H.L. / Shi, Y. et al. | 2011
- 1449
-
Study on Milling Testing of WC-Co Cemented Carbides Diamond Coated PCB Milling CuttersZheng, Y.Y. / Wu, L. / Zhang, C.L. et al. | 2011
- 1453
-
Plastic Micro Features Produced by Microwelding MachineLiu, H. / Xu, Y. / Yung, K.L. / Kang, C.L. / Tian, W. et al. | 2011
- 1457
-
Bond Interface Evaluation by Ultrasonic Testing and SEM for Radial Friction Welding Joints of Copper and SteelWu, W. / Zhu, L.Y. / Wu, G.F. et al. | 2011
- 1462
-
Preparation of Bio-Material Liquid Film and its Function of Reducing Soil Water EvaporationLi, D. / Lv, J. / Ni, W.Z. et al. | 2011
- 1467
-
Study on Bearing Dynamic Properties of Nano-Particle Reinforced ZA27 Alloy Composite MaterialQin, Z. / Ma, K.P. et al. | 2011
- 1471
-
Microstructure and Property Research of T91 and T23 Heat-Resisting Steel Welding JointWu, G.F. / Zhang, X.B. / Xu, H.B. et al. | 2011
- 1475
-
The Relationship of NaOH Molarity, Na~2SiO~3/NaOH Ratio, Fly Ash/Alkaline Activator Ratio, and Curing Temperature on the Strength of Fly Ash-Based GeopolymerAbdullah, M.M.A. / Kamarudin, H. / Bnhussain, M. / Nizar, I.K. / Rafiza, A.R. / Zarina, Y. et al. | 2011
- 1483
-
Prediction Method of the Dent Depth of Composite Laminates Subjected to Quasi-Static IndentationYe, Q. / Chen, P.H. / Shen, Z. et al. | 2011
- 1487
-
Study on Properties and Mechanism of Si-Reinforced Zn-Al AlloysSong, X.A. et al. | 2011
- 1491
-
Wind Power Micro-Generator Using Dielectric Electric Active PolymerLin, G.J. / Zhang, X.B. / Song, D.C. et al. | 2011
- 1495
-
Bioactivity of L-b-L Self-Assembly TiO~2 Hollow Spheres by UV Irradiation EnhancedXiao, F. / Li, W. / Gao, F. / Zhang, Z.X. et al. | 2011
- 1499
-
Optimization of Experimental Parameters to the Formation of Bi2212 Phase via Sol-Gel MethodYang, H.Z. / He, Y.S. / Ji, Y. / Li, Z.M. / Zhu, H. et al. | 2011
- 1503
-
Study on Infrared Transparent Radar Double Band-Pass FilterJia, H.Y. / Feng, X.G. et al. | 2011
- 1507
-
Synthesis and Photocatalytic Property of FeVO4 Photocatalyst by Sol-Gel MethodWang, M. / Zhang, L.F. / Luan, H.Y. et al. | 2011
- 1512
-
Tensile Mechanical Properties of Wood Fiber / PVC CompositesDuan, J.L. / Jiang, E.C. / Lu, Y.H. et al. | 2011
- 1517
-
Optimization of Process Parameters in Spark Plasma Sintering Al6061 and Al2124 Aluminum AlloysKhalil, A. / Hakeem, A.S. / Saheb, N. et al. | 2011
- 1523
-
Diffusion Behavior of Aluminum Atoms in Hot Dip RE-AluminizingZhang, W. / Liu, A.P. / Jin, W.Z. et al. | 2011
- 1528
-
Mechanism Study on the Coiled Tubing Deformation under a Combination LoadingLi, L. / Shen, Z.X. / Wang, P. et al. | 2011
- 1533
-
Synthesis and Characterization of Poly ( epsilon -caprolactone)/ TiO~2 Nanocomposites Obtained by In Situ PolymerizationWang, G.S. / Wei, Z.Y. / Liu, L. / Wang, P. / Qi, M. et al. | 2011
- 1537
-
MMT and Short Time Soaking in Hexane to Suppress DOP Migrating from Flexible PVCLi, L.X. / Xiao, Y. / Wang, B. / Li, X.H. / Xue, T. et al. | 2011
- 1541
-
Synthesis of Spherical Zinc Oxide Micro-Flower via an Electric Field-Assisted Homogeneous Precipitation MethodLiang, X.J. / Hu, X.F. / Weng, X.X. / Hu, D.W. / Ji, H.X. et al. | 2011
- 1545
-
Microstructural Characterization of Rapidly Solidified Al-High Si AlloysAtkinson, H.V. / Alshmri, F.D. / Hainsworth, S.V. / Lawes, S.D.A. et al. | 2011
- 1552
-
Effect of Artificial Aging (T6) on Microstructure of Al-AC8H/Al~2O~3 MMC Produced by Stir Casting RouteZulfia, A. / Ajiriyanto, M.K. et al. | 2011
- 1556
-
Influence of Small-Strain and Large-Strain Methods on Mechanical Behaviors in Shape Memory AlloysWu, Y.Z. / Zhu, Y.P. / Dui, G.S. et al. | 2011
- 1560
-
Synthesis, Characterisation of Al~2O~3-Cu Nano Composite Powder and Water Based NanofluidsSuresh, S. / Venkitaraj, K.P. / Selvakumar, P. et al. | 2011
- 1568
-
Microstructures Finite Element Simulation of Laser Cladding Layer Regulated by Micro-ForgingZhou, J. / Qiu, C.J. / Cheng, X.Y. et al. | 2011
- 1572
-
Investigation of Phase Composition and Microstructure of the B4C/BN Nanocomposite Powders and the B4C/BN Nanocomposites Sintered BulksJiang, T. et al. | 2011
- 1576
-
Effect of Dopants on Microstructure and Properties of Polyaniline and PolypyrroleYang, L. / Zhang, C.S. et al. | 2011
- 1580
-
Hydrothermal Synthesis and Photoluminescent Properties of Zinc Tungstate Nano/MicrostructuresWang, Q. / Sun, M.M. / Li, C.H. et al. | 2011
- 1585
-
The Effect of WC Doping on the Electrochemical Behavior of Nanosilicon/CMC/AB Composite ElectrodeWen, Z.S. / Lu, D. / Sun, J.C. / Ji, S.J. et al. | 2011
- 1589
-
Preparation of Cottonseed Protein-Based Superabsorbent Hydrogel CompositeZhang, B.N. / Cui, Y.D. / Yin, G.Q. / Zhou, H.B. et al. | 2011
- 1594
-
The Characterization of Different Doses of Electron Beam Irradiation on the Structure and Properties of PAN Precursor FibersYu, H.W. / Yuan, H.W. / Wang, Y.S. / Wei, Z. et al. | 2011
- 1598
-
Numerical Simulation of Hot Forging for the Disc of Superalloy GH4169Zhang, Y.S. / Liu, X.F. et al. | 2011
- 1602
-
Constitutive Modeling for the Prediction of Peak Stress in Hot Deformation Processing of Al Alloy Based NanocompositeSenthilkumar, V. / Abhishek, A.B. / Ahamed, H. et al. | 2011
- 1606
-
Microstructure and Properties of Surface Nanostructured CopperLin, W.M. / Wei, Y.H. / Hou, L.F. et al. | 2011
- 1610
-
Investigation on Properties of a New CB/WPUA Composite CoatingZhang, T. / Wu, W.J. / Zhang, L. / Dai, X.D. et al. | 2011
- 1614
-
Flow Stress Constitutive Equation of AZ31 Magnesium Alloy for Hot CompressionWu, W.H. / Lou, Y. et al. | 2011
- 1619
-
Effect of Microwave Drying on Dyeing Rate of Cotton YarnZhu, Z.N. / Meng, Z. / An, G.C. / Sun, Y.Z. et al. | 2011
- 1623
-
Research on Inner Cooling Apparatus Sets in the Mold of 700mmx700mm BloomBai, M.H. / Liu, J.J. / Ge, J.L. / Liu, Z.Q. / Zhang, Z.M. et al. | 2011
- 1627
-
Study on the Graphite-Based Cementitious Material for the Soil Moisture Detective ProbeYao, L. / Liu, X.C. / Wu, H.L. / Li, W.X. et al. | 2011
- 1632
-
Preparation and Applications of Compatibilizer in HPVC/EPDMLiang, B. / Ji, J.M. / Hong, X.D. / Cao, J. et al. | 2011
- 1636
-
Comparative Study on Thermal, Compressive, and Wear Properties of Palm Slag Brake Pad Composite with other FillersRuzaidi, C.M. / Kamarudin, H. / Shamsul, J.B. / Abdullah, M.M.A. et al. | 2011
- 1642
-
Preparation of Flexible Graphite Sheet with Fine Flake GraphiteLai, Q. et al. | 2011
- 1646
-
The Bending of Symmetrical Laminated Composite Plate Based on Symplectic MethodYang, Y.Z. et al. | 2011
- 1650
-
Effects of La on the Microstructures and Mechanical Properties of AZ91 Magnesium Alloy and its MechanismZhang, J.L. / Wang, S.B. / Qi, X.Y. / Xu, B.S. et al. | 2011
- 1654
-
Studies on Mechanical Properties and Wear Behaviour of In Situ Al-TiC CompositesJerome, S. / Kumar, A. / Babu, S.P.K. / Ravisankar, B. et al. | 2011
- 1663
-
Research on the Development of Large Application Specific Integrated Circuit Based on SOPCKong, Q.C. / Zhang, G.C. / Li, Y.X. et al. | 2011
- 1667
-
Modeling and Simulation of PMSM DTC System Based on the Speed SensorlessGao, W.E. / Jiang, M. / Qiang, S.S. et al. | 2011
- 1671
-
Study on the Relationship between Hydraulic Support on the Working Face with Large Mining Height and Surrounding RockMa, Y. / Zhong, S. et al. | 2011
- 1675
-
A Self Motion and Rotation Video Nodes Coverage AlgorithmTang, L. / Yu, C.D. / Zhang, C.W. / Wang, Y.F. et al. | 2011
- 1679
-
Dynamic Research and Design on SINS Damping System in VehicleLi, J. / Tao, R.P. / Liu, J. / Chen, W. et al. | 2011
- 1684
-
Studying on Multiple Services Precoding of MIMO SystemZhao, L.G. / Fan, W. et al. | 2011
- 1689
-
Research on B2C Electronic Commerce System Based on X3D/VRMLOu, Y.Q. / Zhou, L. / Fang, Y.P. et al. | 2011
- 1693
-
Direct Torque Control of Asynchronous Motor Based on Flux Auto SwitchingLi, S.Q. / Hao, S.A. / Ma, X. / Cheng, Y.M. et al. | 2011
- 1697
-
Two Friction's Laws for Lagrange's Equations of Multibody System with Dry FrictionWang, J.F. / Liu, Y.J. / Gao, S.C. / Li, S. / Feng, F. et al. | 2011
- 1701
-
Ant Colony Algorithm's Application of Textile Monitoring Image RecognitionFu, Y.L. / Chen, S.Q. / Zhang, L.H. et al. | 2011
- 1705
-
Tire Pressure Monitoring Inflatable Restraint SystemLi, T. / Chen, X. / Yin, Q.X. / Hou, Y.P. et al. | 2011
- 1709
-
Research on the Broaching-Load Testing System of Hydraulic Broaching MachineXu, M. / Ni, J. / Chen, G.J. et al. | 2011
- 1713
-
Adaptive Impedance Control for Robot Based on Estimation of Environmental ParametersLi, Z.M. / Li, E.C. et al. | 2011
- 1717
-
Fault Diagnosis of Hoist Gearbox Based on Time-Domain Analysis of EMD and Fuzzy ClusteringLi, Z.G. / Yan, B.J. et al. | 2011
- 1721
-
Modeling and Simulation of Hydraulic System of the Tower-Belt Based on Power Bond GraphWang, J.Z. / Zhou, J.Z. / Cao, G.J. / Zhang, X.Y. et al. | 2011
- 1725
-
Open Automatic Laser Engraving SystemYan, H.F. / Chen, J.M. / Shao, J. et al. | 2011
- 1729
-
Surface- Based Computing Model of Maximum Independent Set ProblemYang, Y. / Yin, Z.X. et al. | 2011
- 1734
-
Coupled Flexural-Longitudinal Vibration in a Curved Periodic Pipe Conveying FluidShen, H.J. / Wen, J.H. / Yu, D.L. / Huang, L.J. / Xiao, Y. / Wen, X.S. et al. | 2011
- 1739
-
Self-Adaptive Scaling Factor Fuzzy Controller and NC Feeding Servo SystemZuo, Y.H. et al. | 2011
- 1743
-
A New 2T-2R Hybrid Parallel ManipulatorChen, W.J. / Zhao, L.L. et al. | 2011
- 1747
-
Digital Frequency Multiplying Method for the Power System Frequency Tracking Based on FPGAGao, C.Y. / Li, W.J. / Liu, M. / Han, R. et al. | 2011
- 1751
-
Study of Coplanor Capacitance Prong Teeth SensorsWu, C.H. / Zhang, C. / Wang, Z.G. et al. | 2011
- 1755
-
Multiple Vortex Body Vortex Numerical SimulationLiu, H.X. / Liu, Z. / Li, H.L. / Feng, X.X. / Xing, Z.Z. et al. | 2011
- 1759
-
Study on Intelligent Control of Milling Process Based on MATLABLai, X.Y. / Yan, C.Y. / Ye, B.Y. / Li, W.G. et al. | 2011
- 1763
-
Research of Fabric Weave Pattern's Recognition Using Texture Orientation FeaturesShen, J.Q. / Zou, X. et al. | 2011
- 1768
-
A Novel Precision Ultrasonic ThermometerZhang, X.H. / Cai, W. / Xiang, F.Y. / Zhang, T.H. / Liu, S.X. et al. | 2011
- 1772
-
A Kind of Land Form Detector for Loose and Soft Sandy Soil Milling-Planing and Collecting Device MachineryQiu, S. / Hu, H. / Liu, J.P. / Lv, X.H. / Wang, X.L. / Li, W.J. et al. | 2011
- 1778
-
Design of a Hand Exoskeleton Rehabilitation DeviceBi, Q. / Yang, C.J. et al. | 2011
- 1784
-
On-Line Test System of Air-Condition in AutomobileSun, F.F. / Liang, C.P. / Li, P. et al. | 2011
- 1788
-
Characteristics of Human Operator in Manual Tracking Control SystemFu, X.H. / Wang, J. / Ouyang, S.L. / Song, W.B. et al. | 2011
- 1792
-
Dynamic Characteristics Analysis and Simulations of Transverse Vibration of Axially Moving Electrode Wire in WEDMFan, S.Y. / Zhang, Q.J. / Chen, H.W. et al. | 2011
- 1797
-
Modeling of Networked Control Systems in Electric Multiple Unit with Packet Dropout and Network-Induced DelayLi, X. / Dong, H.Y. et al. | 2011
- 1801
-
Automatic Positioning Control System of TrainZhang, J. / Li, H. / Li, R.H. et al. | 2011
- 1806
-
A Temperature Detecting System Based on DS18B20Wu, Y.X. / Liu, D. / Kuang, X.H. et al. | 2011
- 1810
-
A Study of Predictive Control of Energy-Saving of Heating ProcessZhu, X.L. / Zhu, S.X. / Guo, S.H. et al. | 2011
- 1814
-
Defects Classification of Steel Cord Conveyor Belt Based on Rough Set and Multi-Class v-SVMMa, H.W. / Mao, Q.H. / Zhang, X.H. / Zhang, D.W. / Chen, H.Y. et al. | 2011
- 1820
-
Design of High-Speed and Low-Power Two-Channel Pipeline ADCCheng, L. / Xu, J. / Zhang, Y.X. / Yang, N. et al. | 2011
- 1824
-
Design of CMOS Amplifier Using New CCII TopologiesCheng, L. / Li, N. / Xi, J.J. / Yang, N. et al. | 2011
- 1828
-
The Research of Digital Double Close-Loop DC Speed Regulation System Based on ATMega8Wang, J.H. / Zhang, L. / Long, Y. et al. | 2011
- 1832
-
Study on the Shovel and Support Bracket's Compensation for Vertical Pose's Deviation of RoadheaderMu, J. / Wu, M. et al. | 2011
- 1837
-
Application of Intelligent Characteristic Model in Alumina Concentration Control SystemZhou, T.P. et al. | 2011
- 1841
-
Visual Detection System Research of the Button Battery Based on LabviewLiu, H.H. / Lin, S.Z. / Liu, B.Y. et al. | 2011
- 1846
-
Performance and Benefit Analysis of Mining Accumulator Locomotive AC Speed System Based on DTCZhang, X. / Yang, J. / Chen, W.C. / Huang, Q.Z. et al. | 2011
- 1851
-
Shuttle-Type Passive Control System for Pressure Pipeline ConveyingChen, K. / Zeng, X.W. / Qiu, X.P. et al. | 2011
- 1855
-
Adaptive Simulated Annealing Genetic Algorithm for Optimizing Injection Production Parameters of Steam Flood WellSun, T.J. / Shi, J.F. / Yu, X.H. et al. | 2011
- 1860
-
Experiment Research on Bionic Structure of Mechanically Coupled Diaphragms for Sound Source LocalizationWang, Q.S. / Liu, X.H. / Li, N. et al. | 2011
- 1864
-
Design of a Speech Decoding System Based on CortexZhang, H. et al. | 2011
- 1868
-
An Anti-Sway Controller's Design of the Overhead CraneYang, B. / Ma, L. et al. | 2011
- 1872
-
Control Strategy Study on Drum Water Level of Supercharged Boiler Based on Radiation Energy SignalZhou, G.Y. / He, W.S. / Zhou, H.C. et al. | 2011
- 1876
-
Application of Artificial Neural Network to Flaw Classification in Ultrasonic TestingChen, Y. / Ma, H.W. et al. | 2011
- 1881
-
Global Path Planning for Full-Area Coverage Robotic Systems by Employing an Active Genetic AlgorithmZeng, C. / Zhang, Q. / Wei, X.P. et al. | 2011
- 1887
-
The Analysis on Fire Smoke Exhausting Robot Vibration Based on Wavelet TransformFang, S. / Hu, B. / Liu, S.P. et al. | 2011
- 1892
-
Study on Ultrasonic Characteristics and Sensors in Partial DischargeZhao, G.X. / Yu, Q. et al. | 2011
- 1896
-
A Study on Improved Eclat Data Mining AlgorithmLi, Z.F. / Liu, X.F. / Cao, X. et al. | 2011
- 1900
-
Electrical Errors Analysis and Correction for Time Grating Displacement SensorZhang, T.H. / Peng, D.L. / Yang, J.S. / Wang, X.Q. et al. | 2011
- 1904
-
Energy Regulation Based Close-Loop Variable-Speed Valve-Controlled-Motor SystemXu, M. / Jin, B. et al. | 2011
- 1908
-
A Study of PID Control System Based on BP Neural NetworkLiu, W. / Cai, J.J. / Fan, X.P. et al. | 2011
- 1912
-
Automatic and Intellectualized Reconstruction of the Surface Roughness Measuring InstrumentYuan, F.W. / Jiang, Y. / Hu, L.B. et al. | 2011
- 1916
-
Parameter Identification of Inertia Properties of Space Robot Based on Momentum ConservationWang, C. / Gao, Y.M. / Du, X.P. et al. | 2011
- 1922
-
Design of Test System for Static Parameters of Projectile and Rocket Based on LabVIEWCheng, X.L. / Zhang, A.J. / He, Y.F. et al. | 2011
- 1926
-
Design and Application of Network Borehole-Ground Electrical Measurement SystemShao, L. / Lin, J. et al. | 2011
- 1930
-
Design and Study on Intrinsically Safe Circuit of Portable Infrared Methane Alarming DeviceWang, X.H. / Wang, J.Y. / Zhang, J.L. / Liang, T. et al. | 2011
- 1935
-
Development of High Temperature Superconductor Current LimiterLu, J.Z. / Zhang, H.X. / Yang, L. / Hui, D. / Fang, Z. / Li, B. et al. | 2011
- 1940
-
IT-Infrastructure for an Integrated Visual Analysis of Distributed Heterogeneous SimulationsMeisen, T. / Reinhard, R. / Beer, T. / Schilberg, D. / Jeschke, S. et al. | 2011
- 1947
-
PS-FB-ZVZCS PWM Converter Modeling and Simulation Based on the PID Neural NetworkXiong, S.Z. / Shu, H.L. et al. | 2011
- 1953
-
Application of Serial Communication Control in the Motion Control SystemLiu, J.Q. / Wu, J.R. / Xu, D. / Li, X. / Huang, J. et al. | 2011
- 1957
-
Research on QoS Services to MPLS Enabled Industrial Control NetworkZhou, S.X. / Ju, G.G. / Sheng, P.F. et al. | 2011
- 1963
-
Design of Vibration Signal Data Acquisition System for Rolling Bearing Life Testing Machine Based on Virtual Instrument TechnologyYu, G.L. / Dang, L.H. et al. | 2011
- 1968
-
The Portable Computer System of Wet Gas Two-Phase Flow Measurement Based on LabviewXu, Y. / Ma, R.S. / Fu, C.M. et al. | 2011
- 1973
-
Design of Electric Connector's Automatic Assembly SystemRen, D.Z. / Guo, Y.G. / Xu, L.P. et al. | 2011
- 1977
-
The Design of Embedded Motion Controller Based on DSP and Development of Driver under LinuxTang, G.J. / Jiang, T.B. et al. | 2011
- 1981
-
Wet Gas Flow Rates Computation System for Unattended Operational Natural Gas Well Based on ARMXu, Y. / Fu, C.M. / Ma, R.S. / Zhang, Q. et al. | 2011
- 1985
-
Design of Intelligent Control and Diagnosis System of Aquaculture Based on PROFIBUSPeng, F. / Zhou, W.H. et al. | 2011
- 1990
-
A New Approach for Coverage Area Computing of Radar NetworkWang, S.S. / Che, W.F. / Feng, J.F. / Li, M.Z. et al. | 2011
- 1995
-
Application of Vibration and Noise Analysis in Water-Lubricated Rubber Bearings Fault DiagnosisPeng, E.G. / Liu, Z.L. / Zhou, X.C. / Zhao, M.Y. / Lan, F. et al. | 2011
- 2000
-
Research and Design on the Control System of the Deastringency of Fresh PersimmonLi, Y.R. / Zhang, H.Y. / Wang, A.M. / Si-Ma, Z.W. et al. | 2011
- 2004
-
Underwater Acoustic Sensor Network Nodes Targeting and Optimization StrategiesZhang, H. / Liu, Y.L. et al. | 2011
- 2010
-
The Research of the Ultrasonic Heat Meter Adopting the Two Reflection StructureLiao, B. et al. | 2011
- 2014
-
Strategic Study on Metro Train Comfortableness Based OperationHe, C.M. / Li, H. / Fei, G.S. / Wang, Q. et al. | 2011
- 2019
-
Research and Design of a New Control System for Internal Vibration Concrete Shaping MachineZheng, S.L. / Li, G.H. et al. | 2011
- 2023
-
Research on the Oil-Gas-Water Three-Phase Flow Experimental ApparatusXu, Y. / Li, T. et al. | 2011
- 2027
-
Denoising Algorithm Based on Correlation of Inter Scales Wavelet Coefficient for Damage Signal of Wire RopeZhan, W.X. / Tan, J.W. / Wen, Y. et al. | 2011
- 2032
-
The Design of Paver Driving Control System on SCMSong, C.F. / Wang, M.D. et al. | 2011
- 2036
-
Study on MCU Based Programmable Frequency DetectorZhang, Z.Y. / Zhao, L.H. / Tan, M.M. / Guo, H.H. et al. | 2011
- 2040
-
Simulation and Control about Arrival and Aerobraking on NeptuneLiu, B.Y. / Liu, W.F. et al. | 2011
- 2044
-
Product Innovation Design Knowledge Acquisition System Based on MASLuo, J.S. / Li, W.Q. / Jiang, J. et al. | 2011
- 2050
-
Research on Feature Extraction Based on Vibration Phase Diagram and its Application in Roller Fault DiagnosisTang, Y.H. / Zhang, H.Y. / Lin, G.X. et al. | 2011
- 2055
-
Design and Simulation for Control System of Tobacco Leaf Roasting Based on Fuzzy-PID ControlLi, S.Q. / Yang, X.J. et al. | 2011
- 2059
-
Design and Modal Analysis of Automatic Cleaning Wall MechanismLi, D.W. / Li, S. / Chen, X.M. et al. | 2011
- 2064
-
Blind Source Separation Based on Wavelet and Cross-WaveletWang, J.H. / Zhao, Y.C. et al. | 2011
- 2069
-
Design and Implementation of Nonlinear Junction Detection FPGA-Based SystemZhang, J. / Liu, X.J. / Li, Y. et al. | 2011
- 2074
-
Research and Application of Robotics Remote SensingZhang, G.P. / Wang, B. et al. | 2011
- 2079
-
Amplitude Control of Limit Cycle in Chua SystemXu, F.L. / Liu, S.H. et al. | 2011
- 2086
-
Research on Visible Measurement of Dispersion Spot at Four Quadrant Photoelectric DetectorHe, L.K. / Gao, Y. / Ning, S.C. et al. | 2011
- 2092
-
Monitoring System of Two Levels Non-Continuous Signal of Automotive Camshaft SensorTian, J.M. / Guo, F.Y. / Gong, C.L. et al. | 2011
- 2097
-
Double Error Function Decision Feedback Momentum Blind Equalization AlgorithmXing, L.K. / Wu, L. / Guo, Y.C. et al. | 2011
- 2102
-
One Kind of High Precision Non-Contact Displacement Sensor and its ApplicationLi, X. / Chen, Y.R. / Wang, S.H. et al. | 2011
- 2108
-
A Robust Trajectory Tracking Control Scheme of Two-Link Flexible ManipulatorLu, J.S. / Du, C.M. / Zhou, R. / Li, N. et al. | 2011
- 2113
-
Mixed Vibration Signal Separation and Moving Object Detection Based on Independent Component AnalysisQiang, N. / Xiang, F. et al. | 2011
- 2117
-
The Robotic Force Tracking Based on Single Input Fuzzy Adaptive ControllerLi, E.C. / Li, Z.M. et al. | 2011
- 2121
-
Automatic Positioning Closed-Loop Control Cystem Design of Linear Time Grating SensorZhang, T.H. / Peng, D.L. / Yang, J.S. / Wang, X.Q. / Dong, C. et al. | 2011
- 2125
-
Adopting Three-Level Inverter to Solve the Bearing Fault of Roll FormingLi, F.Y. et al. | 2011
- 2129
-
Experimental Study of the Variable Stiffness Vibration IsolatorShuai, Z.J. / Yang, T.J. / Zhou, Z.L. / Liu, Z.G. et al. | 2011
- 2134
-
The Identification of Engine Noise Source Based on Simulink Blind Sources SeparationGao, J.W. / Quan, Y.M. / Lin, Y.M. et al. | 2011
- 2140
-
Surface Tracking with Robot Force Control in Unknown EnvironmentLi, E.C. / Li, Z.M. et al. | 2011
- 2144
-
Configuration Software-Based Control System for Wine ProductionZang, H.D. et al. | 2011
- 2148
-
Impact of Long Hydraulic Pipeline upon Performance of Hydraulic Control SystemZhao, Y.N. / Du, H.W. / Li, Y.M. / Luo, X. / Liu, G. et al. | 2011
- 2152
-
Study on Pilot's Visual InformationLiu, W. / Yu, C. / Zhuang, D.M. / Yuan, X.G. et al. | 2011
- 2156
-
A Research on the Stiction and Detection in the Control ValvesLi, S. / Zhang, C.L. / Li, J. / Liu, J. et al. | 2011
- 2163
-
Path Planning of a 6DOF Humanoid ManipulatorCui, Y.J. et al. | 2011
- 2167
-
Design of LabView-Based System of Noise Measurement on Gear BoxWei, X.B. / Zheng, W. / Lin, R. et al. | 2011
- 2172
-
Investigation of Motor-Generator Integration System for Electric Vehicle Based on Induction Motor and Fuzzy ControlXing, Z.L. / Liu, Y. / Liu, Y.F. et al. | 2011
- 2181
-
E-Business Data Integration Scheme Based on XML TechnologyHu, Y.P. et al. | 2011
- 2185
-
Design of Control System of DC Motor Based on Fusion FPGAZhu, D.D. / Li, H.W. et al. | 2011
- 2190
-
Research on Vibration Isolating with Magneto-Rheological DamperXia, Z.W. / Qi, X.M. / Wen, H.B. et al. | 2011
- 2194
-
Feedforward and Feedback Control of an Inverted PendulumWu, Y.F. / Zhu, M. / Fu, K.C. et al. | 2011
- 2198
-
Modeling and Simulation for Parachute Inflation Process Based on Finite Element MethodXu, G. / Geng, R.B. / Zhang, N.B. et al. | 2011
- 2203
-
Simulation Analysis of Wheeled Vehicle Skid-SteerWang, Y.F. / Dong, X.R. et al. | 2011
- 2207
-
The Research and Application of the Internal Combustion Engine Power Plant-Rotary UPS Monitoring SystemsSun, X.J. / Wang, X.G. / Wang, C.N. et al. | 2011
- 2211
-
A New Strengthening-Polishing Bearings Equipment Based on the Anti-Fatigue Manufacturing TechnologyWang, H. / Liu, X.C. / Liu, C.J. / Li, W.X. et al. | 2011
- 2215
-
Research on High Dynamic Target Electro-Optical Tracking Based Improved Robust Disturbance ObserverYu, X. / Liu, Z.H. / Ren, Y. et al. | 2011
- 2220
-
Flexible Dynamic Analysis of Hydraulic Excavator's BoomSun, D.X. / Liu, X.H. et al. | 2011
- 2224
-
A Wireless Human Pulse Wave Detecting System Based on LabViewCao, X.Y. / Lei, Y. et al. | 2011
- 2229
-
Object Detection Based on the Frame Difference and Cellular AutomataFeng, X.L. / Xu, X.J. et al. | 2011
- 2234
-
Optimizing Design of Real-Time Spatial Moving Target Tracking SystemLiang, D.S. / Liu, Z.H. / Liu, W. et al. | 2011
- 2238
-
Memory Depth of Processing Theory in Network Analysis of Design TabLiu, W. / Yu, C. / Zhuang, D.M. / Yuan, X.G. / Huang, D.L. et al. | 2011
- 2243
-
Dynamic Analysis of a New Type of Hydro-Viscous Drive WinchHou, Y.F. / Wang, D.M. / Meng, Q.R. / Du, B. et al. | 2011
- 2248
-
Performance Characteristics Analysis of Supercritical Boiler Water WallCao, R. et al. | 2011
- 2252
-
A Study of the Automatic Formation Line of Li-Ion Power BatteriesHan, L. / Xiao, F. / Chu, X.P. / Xue, J.F. / Chen, Q.B. / Lei, M. / Zhang, L.X. et al. | 2011
- 2257
-
Design of Control Circuit for Needle-Selected Mechanism of Knitting MachinesHu, G.J. / Feng, F. / Zhao, W.Q. et al. | 2011
- 2261
-
Investigation on Influence of Launch Depth to the Hydrodynamic Characteristics of the Cylinder out of the TubeLiu, H.J. / Peng, X.Z. / Wang, C. / Wang, B.L. et al. | 2011
- 2265
-
Secondary Source Modeling Based on Analogue Circuits of Electrical Mechanical and Acoustical SystemsNie, Y.H. / Cheng, J.S. et al. | 2011
- 2270
-
Design of Magnetic Fluid Sealing Device and Computer Simulation in Sintering MachineBai, M.H. / Liu, Q.R. / Zhou, H.L. et al. | 2011
- 2274
-
A Micro Wireless Attitude Determination System Based on the Extended Kalman FilterLiu, S.P. / Zhou, Z.Y. / Wang, Q. / Guo, Q. / Ma, Z.G. et al. | 2011
- 2278
-
Underactuated in-Pipe Robot for Moving inside Underground Oil PipelinesJiang, X.D. / Jiang, S.Y. / Hu, Z.Y. / Gao, Y.H. et al. | 2011
- 2284
-
The Motion Analysis of Traditional Belt Type Sintering MachineBai, M.H. / Wang, L.J. / Ren, S.B. / An, L.B. / Gao, J.N. et al. | 2011
- 2288
-
The Design of Control System for Auto-Packing Pantyhose MachineLi, P.X. / Sun, Z.J. / Zhu, H.L. / Sun, Y.Z. et al. | 2011
- 2292
-
Study on High Accuracy Constant Tension Controller of Winding MachinePeng, Z.H. / Ma, G. et al. | 2011
- 2296
-
Research on Network Architecture of CSTA Based on P2PWang, W.K. / Huang, Q. / Zhang, X.H. et al. | 2011
- 2300
-
Influence of Vibration on Automotive Interior Decorations Volatile FormaldehydeYu, J. / Jiang, F. et al. | 2011
- 2304
-
Buffer and Vibration Optimization of Missile Data Recorder StructureZhang, J. / Jia, H.G. / Ding, L. / Dong, W.H. et al. | 2011
- 2308
-
Design of Synthetic Diagnostic and Health Management of Launch VehicleLv, W.M. / Song, H.Q. / Feng, J.C. / Jiang, S.W. et al. | 2011
- 2312
-
The Method and Application of Time Series Prediction Based Wavelet Neural NetworkPan, Y.M. / Zhang, Q.Z. / Xue, P.Q. et al. | 2011
- 2318
-
Design Procedure of Robust QFT-Based Controller for Continuous-Flow Grain Dryer PlantMansor, H. / Noor, S.B.M. / Ahmad, R.K.R. / Taip, F.S. et al. | 2011
- 2324
-
The Extracting System Design of Small Dim Targets in Complex BackgroundLiang, D.S. / Liu, Z.H. / Liu, W. et al. | 2011
- 2328
-
Based on Rotating Machinery Data Acquisition System Anti-Aliasing Filter Design and ApplicationSun, H.Y. / Zhang, C.L. / Li, S. et al. | 2011
- 2333
-
Study on Integrated Setup System with Computer Vision for Breast Cancer RadiotherapyTong, L. / Zhu, C.H. / He, Z.Q. et al. | 2011
- 2337
-
ONAMA: A Quantum Leap in High Performance ComputingMisra, G. / Agrawal, S. / Kurkure, N. / Das, S. / Mathur, K. / Pawar, S. et al. | 2011
- 2343
-
Optimization of Comprehensive Assessment Parameters System for Equipment Maintenance Quality Based on Principal Component AnalysisGeng, Q.X. / Wang, S.F. / Zhang, H.M. / Zhang, J. / Meng, F.Q. et al. | 2011