Effects of operating conditions of coke moving bed filter on collection characteristics for nano scale powder (English)
- New search for: Miyashita, S.
- New search for: Miyashita, S.
In:
CURRENT ADVANCES IN MATERIALS AND PROCESSES
;
17
;
858
;
2004
-
ISSN:
- Article (Journal) / Print
-
Title:Effects of operating conditions of coke moving bed filter on collection characteristics for nano scale powder
-
Contributors:Miyashita, S. ( author )
-
Published in:CURRENT ADVANCES IN MATERIALS AND PROCESSES ; 17 ; 858
-
Publisher:
- New search for: Iron and Steel Institute of Japan
-
Publication date:2004-01-01
-
Size:858 pages
-
ISSN:
-
Type of media:Article (Journal)
-
Type of material:Print
-
Language:English
- New search for: 669.1 / 670
- Further information on Dewey Decimal Classification
-
Classification:
-
Source:
© Metadata Copyright the British Library Board and other contributors. All rights reserved.
Table of contents – Volume 17
The tables of contents are generated automatically and are based on the data records of the individual contributions available in the index of the TIB portal. The display of the Tables of Contents may therefore be incomplete.
- 2
-
(Keynote Lecture) Blast furnace operation with low reducing agents rateNaito, M. et al. | 2004
- 6
-
Subjects for achievement of blast furnace operation with low reducing agent rateUjisawa, Y. et al. | 2004
- 10
-
Technology of improvement of shaft efficiency for saving of reducing agents rate of blast furnaceMatsuzaki, S. et al. | 2004
- 14
-
Residual amount of slag and metal management in blast furnace hearth at low reducing agent rate operationNishioka, K. et al. | 2004
- 18
-
Design of burden quality and blast furnace operation under low reducing agent rateSato, T. et al. | 2004
- 22
-
Problems for the BF operation of the low reducing agent rate and attaining to the high rate of reduction and gasificationKashiwaya, Y. et al. | 2004
- 26
-
Subjects for achievement of stable blast furnace operation with low reducing agent rate from a viewpoint of high pulverized coal rate operationMiyagawa, K. et al. | 2004
- 30
-
Numerical analysis on reducing agent rate of blast furnace under various operating conditionsNogami, H. et al. | 2004
- 34
-
Evaluation method of mixing characteristics in chemical reactorsSasaki, Y. et al. | 2004
- 37
-
High efficient processes from a view point of physical chemistry of liquidsTanaka, T. et al. | 2004
- 40
-
Mixing of particles and bubbles with bath by mechanical agitationIto, K. et al. | 2004
- 43
-
Present status and future development of injection technologiesHoshikawa, I. et al. | 2004
- 47
-
Mixing, separation and control of flow in mold through swirling flowYokoya, S. et al. | 2004
- 51
-
Future perspective of applications of plunging jetIguchi, M. et al. | 2004
- 55
-
Mixing and separating processing of two liquids using electromagnetic forceKozuka, T. et al. | 2004
- 57
-
Present status and future subjects of applications of electromagnetic force to mixing and separation processesTakatani, K. et al. | 2004
- 60
-
Physico-chemical properties of liquids at high temperatureNakamoto, M. et al. | 2004
- 63
-
Damaging mechanism of the coke oven walls (Analyze and control resistance of coke pushing)Ohta, K. et al. | 2004
- 64
-
Relationship between roughness of silica brick surface and carbon deposition (Analyze and control resistance of coke pushing)Yokoyama, T. et al. | 2004
- 65
-
The simple selection method of the chamber with adhering useless carbon (Analyze and control resistance of coke pushing)Takayama, N. et al. | 2004
- 66
-
Effect of coal inert size on coke strengthKubota, Y. et al. | 2004
- 67
-
Upgrading effect of medium temperature carbonized coke by reheating treatmentFukada, K. et al. | 2004
- 68
-
Effect of waste wood addition to coal on coke strengthNishibata, Y. et al. | 2004
- 69
-
Chlorine behavior of waste plastics recycling process using coke ovensKato, K. et al. | 2004
- 70
-
(Nishiyama Commemorative Prize) Prediction and control of solidification microstructure in steel weldsKoseki, T. et al. | 2004
- 71
-
(Nishiyama Commemorative Prize) Hot deformation of steels-hot embrittlement and superplasticity^-^-Maehara, Y. et al. | 2004
- 72
-
Precipitation of CuS and MnS at high temperature in Fe-Cu-Sn super ultra low carbon steelsYamamoto, K. et al. | 2004
- 73
-
Effect of high temperature low cycle fatigue on hot ductility of low carbon steelKim, D. et al. | 2004
- 74
-
(Invited lecture) Microwave-material interaction and its application to materials processingTakizawa, H. et al. | 2004
- 75
-
A novel process for quick iron making at low temperature using microwave heatingIshizaki, K. et al. | 2004
- 76
-
Simulation on electric field in microwave oven containing BF slag bearing TiO~2Chen, Y. et al. | 2004
- 77
-
(Invited lecture) 28GHz/3kW microwave heating instrumentSakamoto, N. et al. | 2004
- 78
-
Microwave processing in monolithic refractories dryingFujisaki, K. et al. | 2004
- 79
-
Dezincing behavior from iron and steelmaking dusts by microwave heatingNishioka, K. et al. | 2004
- 80
-
Carbothermic reduction of MgO with microwave heatingYoshikawa, T. et al. | 2004
- 81
-
Decarburization and desiliconization behavior of molten iron by oxidizing gas injectionTajiri, H. et al. | 2004
- 82
-
Kinetics of iron oxide formation under the condition of oxygen top blowing on hot metalMatsui, A. et al. | 2004
- 83
-
Mechanism of aluminothermic reduction of magnesium oxideYang, J. et al. | 2004
- 84
-
Effects of hydrogen and nitrogen gas mixture on nitrogen absorption rate in low carbon steel meltNabeshima, S. et al. | 2004
- 85
-
Dispersion of particles in cylindrical bath under mechanical stirring conditionOkumura, K. et al. | 2004
- 86
-
Effect of nozzle position on the swirl motion of cylindrical bath agitated by liquid jetIguchi, D. et al. | 2004
- 87
-
Mixing time in a bath agitated by swirling liquid jet in continuous refining processYoshida, J. et al. | 2004
- 88
-
Emulsification of two liquid with acoustic cavitationKubo, T. et al. | 2004
- 89
-
Hydrothermal synthesis of zeolite-materials from iron and steel making slagNarushima, T. et al. | 2004
- 90
-
Recycling of steelmaking dust briquettes to BOFWang, T. et al. | 2004
- 91
-
Hydrogen recovery by reactions of carbonaceous materials in supercritical water along with CO~2 fixation(Part-III)Hayashi, S. et al. | 2004
- 92
-
Development of oxygen separating system using mixed ionic-electronic conductorsIshii, J. et al. | 2004
- 93
-
Direct melting technology of pressed ELV by EAF with preheating shaftMizukami, H. et al. | 2004
- 94
-
Application of wasted plastics to thermal and carbon sources in electric furnaces for steel makingKameshima, T. et al. | 2004
- 95
-
New process for rutile extraction from natural ilmenite oreItoh, S. et al. | 2004
- 96
-
Thermodynamics of titanium in stainless steel meltsTae, S. et al. | 2004
- 97
-
Numeral analysis on Si deoxidation equilibrium in whole composition of molten Fe-Ni,Ni-Cu,Ni-Co alloys by quadratic formalismMiki, T. et al. | 2004
- 98
-
Aluminum deoxidation equilibrium of molten Fe-Ni alloyKandori, H. et al. | 2004
- 99
-
Reaction and phase relation between liquid Fe-Cr alloy steel and Al~2O~3 refractoriesMizukami, Y. et al. | 2004
- 100
-
Activities of Fe~xO in the CaO-Nepheline-Fe~xO systemIwase, M. et al. | 2004
- 101
-
Interaction between Ca-B and Ca-P in molten SiYoshikawa, T. et al. | 2004
- 102
-
Distribution of P between solid Si and Si-Al meltYoshikawa, T. et al. | 2004
- 103
-
Deoxidation equilibrium of molten SUS316L stainless steel by calciumKobayashi, Y. et al. | 2004
- 104
-
Effect on the Na addition to the mold flux for high speed castingNakada, H. et al. | 2004
- 105
-
Surface quality improvement of hypoperitectic steel slabs at Kashima No.3 caster with the mold powder promoted crystallization of cuspidineMutou, A. et al. | 2004
- 106
-
Influence of mold flux on surface defectNakashima, J. et al. | 2004
- 107
-
Inclusion entrapment location in solidified shell of ultra low carbon steel slabAwajiya, Y. et al. | 2004
- 108
-
Optimization of outlet port dimension of swirling flow submerged entry nozzleTsukaguchi, Y. et al. | 2004
- 109
-
(ISIJ research promotion grant) Fostering of collision and coalesce of inclusions by the imposition of switching electro-magnetic forceSassa, K. et al. | 2004
- 110
-
Flow simulation in continuous casting mold with electromagnetic brake considering solidified shellYamada, T. et al. | 2004
- 111
-
Simulated observation of the bubble motion in a continuous casting with an electromagnetic brakeFuruhashi, I. et al. | 2004
- 112
-
Morphological transition of solidified structure by a levitation method using AC and DC magnetic fieldsYasuda, H. et al. | 2004
- 113
-
Effect of intense electric field on interfacial phenomenaKozuka, T. et al. | 2004
- 114
-
Effect of two-axis electromagnetic stirring on solidification structures of Al-Bi alloyMaitake, K. et al. | 2004
- 115
-
Phase-field simulation for evolution of solidification structure with fluid flowNatsume, Y. et al. | 2004
- 116
-
Structure control of solidified alloy submerged in a static magnetic field by applying electrical currentIwai, K. et al. | 2004
- 117
-
Characterization of hot tearEsaka, H. et al. | 2004
- 118
-
Improvement of granulation of raw materials with dispersant (Development of the intensified granulation technique in iron ore sintering-3)Okada, T. et al. | 2004
- 119
-
Influence of the nuclei particle properties in high speed agitated material on granulation behavior (Improvement of granulating Marra Mamba ore by introducing the high speed agitating mixer-2)Matsumura, T. et al. | 2004
- 120
-
The sintering behavior of raw material bed added large particlesKamijo, C. et al. | 2004
- 121
-
Isothermal growth of eutectic liquid film accompanied by counter diffusion from bounded interfaceKurimoto, M. et al. | 2004
- 122
-
Non-spherical carbon composite agglomerate: Manufacturing and quality assessmentNakano, M. et al. | 2004
- 123
-
The mineralogical and textural composition of West Angelas lump and fine oreBergstrand, R. et al. | 2004
- 124
-
Effect of Marra Mamba iron ore fines on the granulation of a sinter blend-1Waters, A. et al. | 2004
- 125
-
The matrix sintering properties of West Angelas fines compared with other iron oresClout, J. et al. | 2004
- 126
-
Influence of pellet feed on sinteringLi, X. et al. | 2004
- 127
-
Mineralogical properties of sedimental type magnetite ore deposit in Russia (Effective use of magnetite ore-4)Hida, Y. et al. | 2004
- 128
-
(Program for Stategic Research projects) Effect of metallic chloride on the formation of chlorinated organic compounds during low-temperature oxidation of carbonKuzuhara, S. et al. | 2004
- 129
-
(Program for Stategic Research projects) Influence of atmospheric gas on the dioxin formation through de novo synthesisKuzuhara, S. et al. | 2004
- 130
-
(Program for Stategic Research projects) Formation of dioxins in sintering process - de novo synthesis and precursor pathKawamoto, K. et al. | 2004
- 131
-
(Program for Stategic Research projects) Formation of chlorobenzenes from heat-treatment of carbonaceous materialsSuzuki, K. et al. | 2004
- 132
-
(Program for Stategic Research projects) Comparison of coke properties showing different dioxin emissions during sintering testKasai, E. et al. | 2004
- 133
-
(Program for Stategic Research projects) Analysis of carbonaceous materials in the dusts sampled from windboxes of iron ore sintering machineTsubouchi, N. et al. | 2004
- 134
-
(Program for Stategic Research projects) Influence of coexistence of urea on de novo synthesis of dioxinsKuzuhara, S. et al. | 2004
- 135
-
Effect of dry and wet conditions on liquid flow behavior in packed bedKawabata, H. et al. | 2004
- 136
-
Effect of tuyere angle on raceway formationSawayama, M. et al. | 2004
- 137
-
Activation of deadman state in the blast furnace using serpentine injection through tuyereIchida, M. et al. | 2004
- 138
-
Effect of MgO concentration on the blast furnace slag behaviorNishimura, T. et al. | 2004
- 139
-
The relationship between slag-metal level at blast furnace and electromotive forceYokoyama, H. et al. | 2004
- 140
-
Blow-in operation of Kimitsu No.4 blast furnaceNakamura, K. et al. | 2004
- 141
-
Numerical analysis on top gas recycling in blast furnace with carbon composite agglomerates chargingChu, M. et al. | 2004
- 142
-
Simulation program by excel for optimum operation of blast furnaceOoka, I. et al. | 2004
- 143
-
Surface rearrangement during the reduction of wustite within its range of existenceSasaki, Y. et al. | 2004
- 144
-
Gaseous reduction behavior of partial reduced iron ore hot briquettes with CO-CO~2 mixtureHayashi, S. et al. | 2004
- 145
-
Influence of combined water in coal on pre-reduction of iron oxide with coal carbonization gasInoue, N. et al. | 2004
- 146
-
Carburization and decomposition of CH~4 gas at the surface of pure ironMaeda, K. et al. | 2004
- 147
-
Solid-solid reaction rate and mechanism on heating iron oxide-coal char mixture in vacuumYokomoto, S. et al. | 2004
- 148
-
Carburization and coalescence of reduced iron particles in iron ore-carbon composite pellets heated at elevated temperaturesIguchi, Y. et al. | 2004
- 149
-
Mechanism of iron carburization during smelting reductionOhno, K. et al. | 2004
- 150
-
Pilot plant test for production of iron pebble (Development of new reduction and smelting process on coal bed-1)Ishiwata, N. et al. | 2004
- 151
-
(ISIJ research promotion grant) Density measurement of molten CaF~2 by electrostatic-levitation methodMinato, I. et al. | 2004
- 152
-
Effect of adding R~2O, RO on the viscosity of CaO-SiO~2-Al~2O~3 slagsSaito, N. et al. | 2004
- 153
-
Extension of the viscosity model for molten silicate to multi-component systemsNakamoto, M. et al. | 2004
- 154
-
Viscosities of molten nickel-base super alloys, CM247LC, CMSX-4 and INCO-713CSato, Y. et al. | 2004
- 155
-
Refractive index and its prediction equation for silicate melts containing aluminaKusano, K. et al. | 2004
- 156
-
Thermal conductivity measurement of liquid gallium by a transient hot wire method in a static magnetic fieldYoshimura, T. et al. | 2004
- 157
-
Effects of Na~2O and K~2O on thermal conductivities of CaO-SiO~2 slagsOzawa, S. et al. | 2004
- 158
-
Effect of thermographic slag detector for BOFHisanaga, T. et al. | 2004
- 159
-
Effect of dynamic recrystallizaion of austenite on micro segregation in a strand cast 9% Ni steelHotta, S. et al. | 2004
- 160
-
Relationship between size and composition of inclusions in SUS304 slabEhara, Y. et al. | 2004
- 161
-
Estimation of the surface crack generating temperature region by the average oxide particle radiusOhba, Y. et al. | 2004
- 162
-
Describing melting rate of mold powder with burning loss rate of carbonZhang, C. et al. | 2004
- 163
-
Relaxation of uneven flow by swirl blade in nozzleYokoya, S. et al. | 2004
- 166
-
The safety and responsibility in steel plants (Safety engineering and safety training)Tanaka, K. et al. | 2004
- 167
-
The CO~2 reduction effect by heat insulator use of a residenceIjima, K. et al. | 2004
- 168
-
Mechanical properties of Fe-Al intermetallic alloys combustion synthesized from recycled steel machining chips and aluminum can shredsMatsuura, K. et al. | 2004
- 169
-
Delayed recycling system combining copper containing scrap and heavy metals containing dustKatayama, H. et al. | 2004
- 170
-
Mixing time of cylindrical bath agitated by swirl motion of gas-liquid two phase jetShitara, M. et al. | 2004
- 171
-
Swirl motion of bubbling jet in highly viscous liquid contained in a cylindrical vesselTamamori, T. et al. | 2004
- 174
-
Optimizing allocation of instrumentations for estimation of temperature distribution in reactor furnaceIshimaru, K. et al. | 2004
- 175
-
Aprication of IP-telephony technology at NO.4 blastfurnace of Kimitsu worksSekiya, M. et al. | 2004
- 176
-
A simulator with a heuristic search algorithm for a steel making plantIwatani, T. et al. | 2004
- 177
-
Simulation-based optimization approach for crane scheduling problemsTamaki, H. et al. | 2004
- 178
-
Optimization system for the scheduling of plate rolling millShigemori, H. et al. | 2004
- 179
-
A portable monitoring apparatus for coke oven chamber wallSugiura, M. et al. | 2004
- 180
-
Automation of a slag dragger at the desiliconization stationSugiura, H. et al. | 2004
- 181
-
The vibration analysis system for slag detection in continuous casting processKang, Y. et al. | 2004
- 182
-
High responsive inductive electromagnetic sensorFujisaki, K. et al. | 2004
- 183
-
Online precise measurement of Si content for content graded 6.5% Si steel sheetKato, H. et al. | 2004
- 184
-
Eddy current flaw testing result of steel material by new ET probeKoyama, K. et al. | 2004
- 185
-
Lock-in magneto-optic imaging with rotating magnetic fieldAndo, S. et al. | 2004
- 186
-
(Nishiyama Commemorative Prize) Application of system control technique for steel rolling processKitamura, A. et al. | 2004
- 187
-
Formulation of a mold level control model of continuous casting by molten steel flow analysis methodSuzuki, D. et al. | 2004
- 188
-
Induction heating control system for milling bar reducing skid marksIijima, Y. et al. | 2004
- 189
-
Adaptive control for the head-end strip gauge using recursive least-squaresOhta, T. et al. | 2004
- 192
-
Simulation of forging by parallel processing 3-D rigid-plastic finite element method using diagonal matrixMori, K. et al. | 2004
- 196
-
User-friendly 3D FEM simulation system for bar and wire rod rolling processesYanagimoto, J. et al. | 2004
- 200
-
Simulation of deformation and temperature in press roll piercingKomori, K. et al. | 2004
- 201
-
Design of manufacturing bars and pipes by using upper bound element techniqueHoshino, M. et al. | 2004
- 203
-
Analysis of multipass drawing of stainless steel shaped bars by FE simulationYoshida, K. et al. | 2004
- 207
-
A new drawing process with reduction of residual stress and ultra-smoothing for bar and wire -Analysis of die geometry by elasto-plastic finite elemental method-Kajino, S. et al. | 2004
- 211
-
Prediction of internal defect in cold multistage extrusionYukawa, N. et al. | 2004
- 215
-
Effect of microstructure of hot-strips on the ridging of ferritic stainless steel sheetWang, K. et al. | 2004
- 219
-
Microstructure control of excellent formability ferritic stainless steel "YUSPDX"Kimura, K. et al. | 2004
- 223
-
Improvement of mechanical properties and texture control of steel sheets by spread rollingKaneko, S. et al. | 2004
- 227
-
Development of on-line control system for mechanical properties on the plate rolling millMaeda, Y. et al. | 2004
- 231
-
(Invited Lecture) Life span extention of sintering ore crusherEgawa, T. et al. | 2004
- 234
-
Life extention of main blower on sintering machine utilizing H.V.O.F sprayingIshimori, Y. et al. | 2004
- 238
-
Development and application of overlay weld metal for hot slab sizing press pinch rollsSatoh, Y. et al. | 2004
- 242
-
The microstructure and property of precipitation-strengthening type nickel base welding metalKagawa, K. et al. | 2004
- 246
-
Techniques for extending service life of process rolls by thermal sprayingMidorikawa, S. et al. | 2004
- 250
-
Friction and wear properties of surface roughened rolls for handling steel sheetsAndo, K. et al. | 2004
- 254
-
Application of thermal spraying to the rolls for plastic sheet productionSonoya, K. et al. | 2004
- 258
-
(Nishiyama Commemorative Prize) Research and development for rolling and production processTomita, S. et al. | 2004
- 259
-
Deformation analysis of surface defects in multi-pass and reverse rolling (Deformation analysis for surface defects in plate rolling V)Koyachi, A. et al. | 2004
- 260
-
Experimental investigation of walking characteristics in flat rolling (Development of walking control technology in hot strip finishing mill-1)Tatsumi, Y. et al. | 2004
- 261
-
(Nishiyama Commemorative Prize) Open-die forging technique for ultra large turbine rotor shaftsOno, S. et al. | 2004
- 262
-
Effect of steel grade and temperature on void reductionNakasaki, M. et al. | 2004
- 263
-
Flow characteristics of a planar water jet impinging on a solid substrateFujimoto, H. et al. | 2004
- 264
-
Die design for redrawing rectangular cup and deformation of cup in redrawingIsobe, K. et al. | 2004
- 265
-
Blank design for deep drawing cupIsobe, K. et al. | 2004
- 266
-
(Nishiyama Commemorative Prize) Integrated novel rolling theoryYanagimoto, J. et al. | 2004
- 267
-
Anisotropy of pure titanium sheetKuwabara, T. et al. | 2004
- 268
-
Cold multi-stage deep drawing of titanium alloy sheetsMori, K. et al. | 2004
- 269
-
Effect of solid lubricants on deep drawability of titanium sheetsUeno, Y. et al. | 2004
- 270
-
(Invited lecture) Development of lubricant for mass-productive deep-drawing of titanium sheetGotoh, M. et al. | 2004
- 271
-
Ridging phenomenon in coldrolled Ti-15V-3Cr-3Sn-3Al sheetTakahashi, K. et al. | 2004
- 272
-
(Invited lecture) Hot extrusion forging technology of titanium engine valveIwase, S. et al. | 2004
- 273
-
(ISIJ research promotion grant) Process design of superplastic extrusion with nanocrystalline control (Net-shape control via extrusion)Kimura, H. et al. | 2004
- 274
-
Dental precision casting of biomedical beta type titanium alloy with high melting pointTakeuchi, T. et al. | 2004
- 275
-
Effect of transformation on bending angle in laser forming of pure titanium foilOtsu, M. et al. | 2004
- 276
-
Development of steels & wire for CO~2 are welding under large heat input and high inter-pass temperatureShikano, H. et al. | 2004
- 276
-
Development of steels & wire for CO~2 arc welding under large heat input and high inter-pass temparatureShikano, H. et al. | 2004
- 277
-
Development of the rolling technique for ultra thick H-beams from continuous casting slabsYamaguchi, H. et al. | 2004
- 278
-
Transient analysis of shape rolling using three-dimensional rigid plastic FEMWada, Y. et al. | 2004
- 279
-
Structural performances of TS550N/mm^2 class wide flange H-shapesFujisawa, S. et al. | 2004
- 280
-
Development of profile measuring equipment for ERW forming millHori, H. et al. | 2004
- 281
-
Tube end thickness control in stretch reducing mill by monitoring systemInage, T. et al. | 2004
- 282
-
Austenite grain refinement by large reduction forging technology (Grain refinement by large reduction forging technology-3)Kuroki, T. et al. | 2004
- 283
-
Numerical analysis of deformation, temperature and microstructure in multi-bending process after hot rollingNakata, N. et al. | 2004
- 284
-
Micro-scale modeling for the prediction of microstructure evolution after severe plastic deformation (Part 2: Ferrite nucleus formation model inside austenite grain)Liu, J. et al. | 2004
- 285
-
Micro-scale modeling for the prediction of microstructure evolution after severe plastic deformation (Part 3: Ferrite transformation model after severe plastic deformation)Liu, J. et al. | 2004
- 286
-
Micro-scale modeling for the prediction of microstructure evolution after severe plastic deformation (Part 4: Experimental study of ferrite transformation model)Liu, J. et al. | 2004
- 287
-
Effects of dimension and material of workpiece on coefficient of friction in SRV test machineAoki, K. et al. | 2004
- 288
-
Evaluation of wear property of hot roll by SRV test machineAoki, K. et al. | 2004
- 289
-
Ultra-fine carbide particle dispersed roll for resistance to wearKonno, Y. et al. | 2004
- 290
-
Strength of bond between shell and core in super cermet rolls (Development of super cermet rolls-2)Tomita, H. et al. | 2004
- 291
-
Study of evaluating friction coefficient of grease-base lubricantIhara, H. et al. | 2004
- 292
-
Characteristics of liquid colloidal lubricants with solid powder lubricant and inorganic compound-2Ikeda, J. et al. | 2004
- 294
-
(Keynote Lecture) The influence of upgrading of large diameter line pipe on the development of steel production technologyTakeuchi, I. et al. | 2004
- 298
-
Research for stress corrosion cracking on the external surface of high grade linepipe steelsOkatsu, M. et al. | 2004
- 302
-
Development of heavy wall x70 seamless line pipe for sour serviceKondo, K. et al. | 2004
- 305
-
Simulation method for propagating shear fracture in natural gas transmission pipelineInoue, T. et al. | 2004
- 309
-
(Invited Lecture) 3D computational mechanics simulation of burst of pipeline containing high-pressure natural gasYoshimura, S. et al. | 2004
- 310
-
Metallurgical design of X100 and X120 high strength linepipe steelsHara, T. et al. | 2004
- 314
-
Effect of microstructural characteristics on deformability of high strength linepipe steelsIshikawa, N. et al. | 2004
- 318
-
Metallurgical factors of plastic deformation behavior for high strength steel linepipeShinohara, Y. et al. | 2004
- 322
-
Development of the multi-tandem ultrasonic testing method for weld seam of ERW line pipeEgi, M. et al. | 2004
- 324
-
(Invited Lecture) Recent subject and evolution of high temperature strengthening factor and deformation mechanisms in stainless steelMatsuo, T. et al. | 2004
- 328
-
(Invited Lecture) Changes in precipitates during creep and creep strength of austenitic creep resistant steelsKimura, K. et al. | 2004
- 332
-
Creep rupture properties and fracture mechanisms in austenitic heat-resisting steels with different grain sizesTanaka, M. et al. | 2004
- 336
-
Long-term creep characteristics of advanced heat-resistant stainless steels for fossil fired power plant boilersIgarashi, M. et al. | 2004
- 340
-
Aging behavior of high nitrogen austenitic stainless steel after cold workHamano, S. et al. | 2004
- 344
-
(Invited Lecture) Recent topics and perspective of high-temperature oxidation of stainless steelsTaniguchi, S. et al. | 2004
- 348
-
The effect of pre-annealing treatment on scale structure of 20Cr-5Al foils for automotive catalyst supportFukuda, K. et al. | 2004
- 352
-
Corrosion resistance of Si added austenitic stainless steels in molten saltsNishida, Y. et al. | 2004
- 356
-
Structure and mechanical property of ultra-fine grained high-carbon steelsFuruhara, T. et al. | 2004
- 359
-
Evaluation of tempering behavior in Si added medium carbon steelsNagao, M. et al. | 2004
- 363
-
Role of cementite on two-body abrasive wear in steelsSasaki, T. et al. | 2004
- 364
-
Strengthening mechanism of ultra-heavily drawn pearlite steelsTomota, Y. et al. | 2004
- 364
-
Strengthening mechanism of ultra-heavily drawn pealite steelsTomota, Y. / Suzuki, T. / Kanie, A. / Shiota, Y. / Moriai, A. / Minakawa, N. / Morii, Y. et al. | 2004
- 367
-
Effect of cementite decomposition on delamination in high carbon steel wiresTarui, T. et al. | 2004
- 371
-
Microstructural change during mechanical milling treatment in the Fe-0.8mass%C alloy with different initial microstructureHidaka, H. et al. | 2004
- 375
-
Microstructure observation of severly deformed pearlitic steel by 3DAP/TEMOhsaki, S. et al. | 2004
- 378
-
Microstructural change of cementite in eutectoed steels by heavy deformationUmemoto, M. / Todaka, Y. / Armendariz-Cruz, J.A. / Ohno, A. / Suzuki, M. / Tsuchiya, K. et al. | 2004
- 378
-
Microstructural change of cementite in eutectoid steels by heavy deformationUmemoto, M. et al. | 2004
- 382
-
Method of grain size evaluation in polycrystalline metalsTakaki, S. et al. | 2004
- 386
-
Deduction of spatial grain size distribution with EBSD measurementYin, F. et al. | 2004
- 390
-
Texture of austenitic stainless steelsTomimura, K. et al. | 2004
- 394
-
Quantitative evaluation of retained austenite in low carbon TRIP aided multiphase steel sheet by saturation magnetization measurement and EBSP methodAkamizu, H. et al. | 2004
- 396
-
Estimation of dislocation density by X-ray diffraction methodNakashima, K. et al. | 2004
- 400
-
Effects of conditions of tensile testing on a yield strength of steelHoshino, T. et al. | 2004
- 404
-
Possibility and limitation of numerical analysis based on crystal plasticity (Macro-scale material properties evaluated from micro-scale structural characteristics)Terada, K. et al. | 2004
- 408
-
Microstructure and elongation of duplex stainless steel sheetHamada, J. et al. | 2004
- 409
-
Effect of Nb and N contents on the tempering resistance of low C martensitic stainless steelsHirasawa, J. et al. | 2004
- 410
-
Stretch franging after cold rolling and deep drawing formability of ultra-soft austenite stainless steelHatano, M. et al. | 2004
- 411
-
Strength and toughness of base metal and welded joint of aseismic 15Ni-15Cr(gamma)steelYoshimura, H. et al. | 2004
- 412
-
Machinability of 13%Cr stainless steel included titanium carbo-sulfideIshikawa, K. et al. | 2004
- 413
-
Crevice corrosion behavior of stainless steels under wet-dry cyclic conditionsWatanabe, T. et al. | 2004
- 414
-
Intergranular corrosion of type430 ferritic stainless steel in sulfuric acidHamada, J. et al. | 2004
- 415
-
Stress corrosion cracking of 12%Cr-5%Ni steel for geothermal turbine rotor forgingFujita, A. et al. | 2004
- 416
-
The influence of Ni and Cu on the oxidation state of Si and Mn added steelTakada, Y. et al. | 2004
- 417
-
Behavior of dross phase in CGL zinc bath in practical conditionsChoun, S. et al. | 2004
- 418
-
Corrosion resistance of the plates for ultrafine grained weathering steelNishimura, T. et al. | 2004
- 419
-
Effect of surface treatment of tinplate on adhesion in PET film/tinplate laminatesMatsubara, M. et al. | 2004
- 420
-
Effects of temperature, coating thickness and punch radius for impact energy of polyethylen coated steelMurase, M. et al. | 2004
- 421
-
Effect of the resin structures on the rheological properties of polyester/ melamine paint filmUeda, K. et al. | 2004
- 422
-
(Nishiyama Commemorative Prize) Heterogeneity and its application for advanced sheet steelsUshioda, K. et al. | 2004
- 423
-
Effect of copper on grain growth of austenite in low carbon steelImakawa, K. et al. | 2004
- 424
-
Textures and plastic anisotropy of strip-cast low-carbon steelsXu, P. et al. | 2004
- 425
-
Grain refinement of cold rolled low carbon steel by controlling recrystallization temperature and super cooling of gamma / alpha transformation during annealing processMochida, T. et al. | 2004
- 426
-
Comparison of nanocrystalline surface layer in steels formed by air blast and ultrasonic shot peeningWatanabe, Y. et al. | 2004
- 427
-
(ISIJ research promotion grant) Formation of nanocrystalline structure in steels by metal cuttingTodaka, Y. et al. | 2004
- 428
-
Comparison of nanocrystalline surface layer in steels formed by various severe plastic deformationUmemoto, M. et al. | 2004
- 429
-
(Nishiyama Commemorative Prize) Key point in understanding machinability of steel - Factors affecting built-up edgeYaguchi, H. et al. | 2004
- 430
-
Effect of MnS on built-up edge formation in low-carbon resulfurized free-machining steel (Development of low-carbon resulfurized free-machining steel without Pb-1)Yaguchi, H. et al. | 2004
- 431
-
Effect of MnS aspect ratio on surface roughness of low-carbon resulfurized free-machining steel (Development of low-carbon resulfurized free-machining steel without Pb-2)Anan, G. et al. | 2004
- 432
-
Influence of deoxidation on sulfide morphologies and the machinability of low carbon resulfurized free-machining steelHattori, A. et al. | 2004
- 433
-
(Nishiyama Commemorative Prize) Development of wear resistance and anti-damage rail and high carbon welding technologyUchino, K. et al. | 2004
- 434
-
Influence of sulfide size on rolling contact fatigue lifeNagao, M. et al. | 2004
- 435
-
Effect of surface finishing of test specimen on rolling contact fatigue life of bearing steelKusano, Y. et al. | 2004
- 436
-
Fatigue properties of plazma-nitrided cold work tool steelYokoi, D. et al. | 2004
- 437
-
Small-angle neutron scattering for materials scienceSuzuki, J. et al. | 2004
- 438
-
Application of synchrotron radiation for residual stress measurements in deformed SUS316L stainless steelTsubakino, H. et al. | 2004
- 439
-
Recovery and recrystallization behavior of a ferrite steel subjected to heavy plastic deformation (Application of neutron scattering to steel research:part4)Suzuki, T. et al. | 2004
- 440
-
The strengthening mechanism of heavily drawn pearlitic steels (Application of neutron scattering to steel research:part5)Shiota, Y. et al. | 2004
- 441
-
In situ neutron diffraction during heating for cementite polycrystals (Application of neutron scattering to steel research:part6)Harjo, S. et al. | 2004
- 442
-
Recent development of Mn series air-cooled bainitic steels(part1)Fang, H. et al. | 2004
- 443
-
Recent development of Mn series air-cooled bainitic steels(part2)Fang, H. et al. | 2004
- 444
-
Effect of transformation temperature and C content on the crystallographic feature of upper bainiteKawata, H. et al. | 2004
- 445
-
Modelling upper and lower bainite transformation in steelsAzuma, M. et al. | 2004
- 446
-
A study of variant selection of bcc phase formed from slightly work-hardened fcc matrix in Ni-Cr alloyAdachi, Y. et al. | 2004
- 447
-
Effect of carbide precipitation at austenite grain boundary on crystallography of grain boundary ferriteFuruhara, T. et al. | 2004
- 448
-
Simulation of equilibrium shape of grain boundary ferrite allotriomorphNagano, T. et al. | 2004
- 449
-
Quantification of solid fraction in metal solidifying and melting processesTsukada, K. et al. | 2004
- 450
-
Mechanical properties of steel bars with fine ferrite and cementite structuresKimura, T. et al. | 2004
- 451
-
Alloy design for high modulus steels due to VB~2 compound crystallized in solidification processMiyata, K. et al. | 2004
- 452
-
Influence of alloy elements on corrosion fatigue life of spring steelsKimura, K. et al. | 2004
- 453
-
Inclusion inspection on TiN inclusions conducting fatigue testingFuruya, Y. et al. | 2004
- 454
-
Hydrogen trapping behavior of high-strength steel by thermomechanical treatmentIto, H. et al. | 2004
- 455
-
Determination of hydrogen desorption activation energy by a single TDS spectrumWei, F. et al. | 2004
- 456
-
Hydrogen embrittlement susceptibility of ultra high strength low alloy TRIP-aided steels by SSRTHojo, T. et al. | 2004
- 457
-
Hydrogen thermal desorption properties of high strength austenitic stainless steelYaginuma, H. et al. | 2004
- 458
-
Comparison of hydrogen absorption properties of high-strength SUS304 and SUS631J1 stainless steelYabe, N. et al. | 2004
- 459
-
Evaluation of the delayed fracture property of high strength bolts under atmospheric corrosion (Establishment of performance evaluation method for high strength bolts-1)Matsukado, K. et al. | 2004
- 460
-
Evaluation of the absorbed hydrogen of high strength bolts under atmospheric corrosion (Establishment of performance evaluation method for high strength bolts-2)Matsukado, K. et al. | 2004
- 461
-
Evaluation of the hydrogen absorption property of high strength bolt steels under atmospheric corrosionMatsukado, K. et al. | 2004
- 462
-
Measurement of threshold hydrogen content for delayed fracture using actual boltOmura, T. et al. | 2004
- 463
-
Hydrogen absorption into high strength bolt during salt spray testingWatanabe, S. et al. | 2004
- 464
-
Hydrogen absorption into high-strength bolt under atmospheric exposure and delayed fracture susceptibility evaluationOmura, T. et al. | 2004
- 465
-
Microstructures of creep damaged fine-grained heat affected zone of a 2.25Cr-1Mo steel pipe used in a power plantTezuka, H. et al. | 2004
- 466
-
Influence of tempering and aluminum on creep rupture ductility of quenched and tempered 2.25Cr-1Mo steelKushima, H. et al. | 2004
- 467
-
Creep deformation behaviour for 300,000h of carbon steel(JIS SB480)Kimura, K. et al. | 2004
- 468
-
3DAP study of precipitates in 13Cr-8Ni-2.5Mo martensitic PH stainless steelPing, D. et al. | 2004
- 469
-
Microstructure and mechanical properties of 0.1C-18Cr-9Ni-3Cu-Nb,N steel after long-term agingOkada, H. et al. | 2004
- 470
-
High-temperature nitridation of an alloy 909 in a nitrogen gas atmosphereKusabiraki, K. et al. | 2004
- 471
-
Chenge in morphology of gamma 'phase and substructures for single crystal Ni-based supealloy, CMSX-4, with simple agingOtaki, H. et al. | 2004
- 472
-
Effects of microstructure on creep strength of solid solution treated 15Cr ferritic steelsToda, Y. et al. | 2004
- 473
-
Relationship between creep properties and microstructures of carbon-free martensitic alloysMuneki, S. et al. | 2004
- 474
-
Effect of prior austenite grain size on creep deformation characteristics of martensitic steelsYoshizawa, M. et al. | 2004
- 475
-
(Nishiyama Commemorative Prize) Development of advanced heat resisting steels for steam turbine rotor and gas turbine discKadoya, Y. et al. | 2004
- 476
-
Creep rupture strengths of the aged super-clean 9Cr steel for steam turbine rotorsNiu, L. et al. | 2004
- 477
-
Creep deformation behaviour and substructure in high boron containing ferritic heat resistant steelsSemba, H. et al. | 2004
- 478
-
Microstructures in a B-added Fe-Cr-Co-W heat-resisting steel before and after creep restOhmoto, Y. et al. | 2004
- 479
-
Re-dissolution of MX particles during tempering of high Cr martensitic steelTamura, M. et al. | 2004
- 480
-
Formation of boron nitride type inclusions in high Cr ferritic heat resistant steelSakuraya, K. et al. | 2004
- 481
-
Change of microstructures of the high Cr ferritic heat resistant steel after thermomechanical heat treatmentOkubo, H. et al. | 2004
- 482
-
Microstructure evolution of high-B 9Cr heat resistant steel HAZKondo, M. et al. | 2004
- 483
-
Cavity formation mechanism in each region within HAZ of a welded Mod.9Cr-1Mo steelLee, J. et al. | 2004
- 484
-
Improvement of oxidation resistance for NIMS 9Cr steels by pre-oxidation treatmentKutsumi, H. et al. | 2004
- 485
-
(Nishiyama Commemorative Prize) A microfracture mechanics model for cleavage crack propagation in steel -Toward unification of macro- and micro-fracture mechanics-Aihara, S. et al. | 2004
- 486
-
Effect of volume fraction of secondary phase on charpy absorbed energy of bainitic steelOkatsu, M. et al. | 2004
- 487
-
Early stage of deformation in a bainitic steelMegumi, T. et al. | 2004
- 488
-
Effect of solute copper on yield strength of dislocation-strengthened ironSyarif, J. et al. | 2004
- 489
-
Microstructural factors affecting strength-ductility balance in Cu bearing 9%Ni steelNakada, N. et al. | 2004
- 490
-
Effect of boron on penetration of Cu-Sn liquid phase into austenite grain boundaries in carbon steelNagasaki, C. et al. | 2004
- 491
-
Fabrication and mechanical properties of Lotus-type porous carbon steel under the nitrogen atmosphereHyun, S. et al. | 2004
- 492
-
Effects of oxides on formation of microstructures in steels with simulated HAZKibata, K. et al. | 2004
- 493
-
Characterization of nano-sized Cu precipitates using synchrotron radiationNomura, M. et al. | 2004
- 494
-
Nitrides precipitation in a gas-nitrocarburized ironSano, N. et al. | 2004
- 495
-
Effect of third alloying element on precipitation of iron carbide in tempering of high carbon martensiteMiyamoto, G. et al. | 2004
- 496
-
Effect of Mo on segregation and precipitation of B in low carbon steelAsakura, K. et al. | 2004
- 497
-
Effects of deformation on precipitation in SUS316L stainless steel for usage in nuclear reactorsYamamoto, A. et al. | 2004
- 498
-
The phase separation and coarsening suppression of DO~3 precipitates in Fe-Si-V alloyWakano, M. et al. | 2004
- 499
-
Effect of Nb and Mo addition on mechanical properties of TRIP-aided hot rolled steel sheetHashimoto, S. et al. | 2004
- 500
-
Formability of Nb-Mo bearing TRIP-aided sheet steels with bainitic ferrite matrixNagasaka, A. et al. | 2004
- 501
-
Formability of C-Mn-Al-Si TRIP-aided sheet steels with annealed martensite matrixYu, B. et al. | 2004
- 502
-
(Nishiyama Commemorative Prize) Improvement in various properties of structural steels by precipitation control through thermo-mechanical controlled processingYamamoto, S. et al. | 2004
- 503
-
Homogenization of the microstructure of hot rolled high carbon steel sheet with controlled cooling (Development on high carbon hot rolled steel sheet with excellent formability-1)Nakata, H. et al. | 2004
- 504
-
Effect of microstructure on stretch-flangeability of high-carbon hot-rolled steel sheet (Development of high-carbon hot-rolled steel sheet with excellent formability-2)Nakamura, N. et al. | 2004
- 505
-
Effects of aging property on hydro-formability in ERW steel tubesToyoda, S. et al. | 2004
- 506
-
The effect of the atmospheres on the enriched Cu at the scale/metal interface during the high temperature oxidation of a Cu containing steelKondo, Y. et al. | 2004
- 507
-
(Nishiyama Commemorative Prize) Effects of grain boundaries and their nearby micro-structure on the mechanical properties of IF steel and the metallurgical approach to control themHosoya, Y. et al. | 2004
- 508
-
Evaluation of hydrogen embrittlement susceptibility for sheet steelHayashi, K. et al. | 2004
- 509
-
Effects of crystallographic orientation on etching properties of an Fe-36%Ni alloyOno, T. et al. | 2004
- 510
-
Influence of Al on magnetic properties in Cr added electrical steelOomura, T. et al. | 2004
- 511
-
Silicon steel sheets with {100}<012> texture by oxide-separator-induced decarburizationTomida, T. et al. | 2004
- 512
-
X-ray stress distribution in laser-peened Fe-3%Si single crystalImafuku, M. et al. | 2004
- 513
-
Continuous titanium extraction reactorOno, K. et al. | 2004
- 514
-
Dissolution rate in molten CaCl~2 of CaO formed in calciothermic reduction of TiO~2Suzuki, R. et al. | 2004
- 515
-
Direct thin titanium plate lining technology for steel structuresMori, T. et al. | 2004
- 516
-
Analyses of inhomogeneous macrostructure in commercially pure titanium platesOtsuka, H. et al. | 2004
- 517
-
Fretting fatigue characteristics of Ti-4.5Al-3V-2Mo-2Fe with equiaxed alpha and acicular alpha structuresTakeda, J. et al. | 2004
- 518
-
Effect of cold drawing and heat treatment ontensileproperties of near betatitanium alloy wirerodsTakahashi, K. et al. | 2004
- 519
-
Neutron diffraction during thermal-martensitic transformation of biocompatible Ti-Nb-Sn alloyHarjo, S. et al. | 2004
- 520
-
Wear characteristics of Al-Ti intermetallic compoundNono, K. et al. | 2004
- 521
-
The effect of TiB particulate size on high temperature properties of Ti-22Al-27Nb base compositeEmura, S. et al. | 2004
- 524
-
in-situ observation of material surfaces in aqueous solution by polarization modulated FT-IR reflection absorption spectroscopyNishihara, K. et al. | 2004
- 525
-
Analysis of magnesium hydroxide in monolithic refractoryFujioka, Y. et al. | 2004
- 526
-
Structural analysis of mobile component using modified CRAMPS techniquesSaito, K. et al. | 2004
- 527
-
Chemical state analysis of sulfur in suspended particulate matterTanaka, D. et al. | 2004
- 528
-
(Nishiyama Commemorative Prize) Development of local state physical analysis methodsKawai, J. et al. | 2004
- 529
-
Development of trace oxygen in steel and iron after decontamination of sample surface by the inert gas fusion methodIto, K. et al. | 2004
- 530
-
Simultaneous determination of arsenic, bismuth, antimony and selenium in steels by high power nitrogen microwave induced plasma atomic emission spectrometry with hydride generation techniqueMatsumoto, A. et al. | 2004
- 531
-
Measurement of heavy metal concentrations in dust in flue gas dependent on particulate sizesYoshiie, R. et al. | 2004
- 532
-
FIA system for simple and rapid determination of trace bismuth in iron and steelYamane, T. et al. | 2004
- 533
-
Determination of boron in steel samples by ETV-ICP-MSKataoka, H. et al. | 2004
- 534
-
Separation of manganese, cobalt, nickel and lead in steel by cation-exchange in oxalic acid-nitric acid mediumOguma, K. et al. | 2004
- 535
-
(Nishiyama Commemorative Prize) Atomic emission spectrometry for rapid analysis of steel materialsWagatsuma, K. et al. | 2004
- 536
-
Reassignment of pulse distribution analysis(PDA) principleMizukami, K. et al. | 2004
- 537
-
Effect of electrode cleaning on the spark discharge atomic emission spectrometric stabilityMori, A. et al. | 2004
- 538
-
Analysis of cast iron by glow discharge mass spectrometryItoh, S. et al. | 2004
- 539
-
Improvement of the information depth in glow discharge optical emission spectrometry by using pulsated discharge voltagesWagatsuma, K. et al. | 2004
- 540
-
Determination of trace amounts of Mn,Al,Si and Cr in Fe-based alloys by radio-frequency-powered glow discharge optical emission spectrometry associated with bias-current conduction methodFujimura, T. et al. | 2004
- 674
-
Application of microwave heating techniques to steel industry and to environmental problemsYoshikawa, Noboru / Chen, Yan / Taniguchi, Shoji et al. | 2004
- 677
-
Approach to evaluations of high temperature materials processing from a computational simulation of arc-electrodes systemTanaka, Manabu / Ushio, Masao / Lowke, John J. et al. | 2004
- 684
-
Metallurgical properties of zinc-bearing EAF dust-coal composite pelletShen, Fengman / Dai, Shuhua / Wang, Xiaoming / Liu, Baichen / Shen, Yansong / Yu, Aibing et al. | 2004
- 688
-
Rapid pig-iron making from carbon-composite pellets at low temperatureNagata, Kazuhiro et al. | 2004
- 696
-
Microstructure evolution during the solidification of steelStefanescu, Doru M. et al. | 2004
- 700
-
Solidification of stainless steel on sheet of carbon steel in inversion strip castingWang, Xinhua / Zhang, Jian / Zhu, Zhiyuan / Zhang, Jiongming et al. | 2004
- 704
-
Multi-phase flow simulations in direct iron ore smelting reduction processHwang, W.S. / Hwang, C.J. / Kuo, J.h. / Chuang, H.C. / Liu, S.H. et al. | 2004
- 714
-
Effect of a catalyst on heterogeneous nucleation in pure Fe, Fe-Ni alloys and Fe-Cr-Ni alloysNakajima, Keiji / Hasegawa, Hajime / Khumkoa, Sakhob / Mizoguchi, Shozo et al. | 2004
- 718
-
Influence of Nb and V on the microstructure of Ni-hard type cast iron for hot steel strip millVillanueva, Sergio Bravo / Yamamoto, Kaoru / Ogi, Keisaku et al. | 2004
- 722
-
Control of primary and secondary dendrite arm spacing in Fe-based alloysKudoh, Masayuki / Wo, Bo et al. | 2004
- 731
-
Micro-segregation with dendritic-eutectic solidification in an iron-carbon-metallic ternary systemHimemiya, Toshiakai / Matsuura, Kiyotaka / Kudoh, Masayuki et al. | 2004
- 744
-
Stabilization of surface motion of finite depth molten metal by imposing alternating magnetic fieldYamamoto, Y. et al. | 2004
- 745
-
Holding of molten metal leakage using a high magnetic fieldHirono, Y. et al. | 2004
- 746
-
Behavior of simulated inclusions under the imposition of electromagnetic vibration forcesMurakata, Y. et al. | 2004
- 747
-
Improvements in efficiency of the cold crucible furnaceYamamoto, K. et al. | 2004
- 748
-
Free-form microchanneling by a new powder-metallurgical processTakatoo, M. et al. | 2004
- 749
-
Instability and effect of crushing energy on the milling of iron oxide-carbon mixtureSuzuki, R. et al. | 2004
- 750
-
alpha-Iron nucleation and growth on the surface of Fe~3O~4 crystalHijino, S. et al. | 2004
- 751
-
Effect of niobium on the solidification of iron and iron-carbon alloyTezuka, M. et al. | 2004
- 752
-
Formation mechanism of large carbide in high carbon bearing steel and prevention measures against large carbide formationIsobe, K. et al. | 2004
- 753
-
Relationship between composition and crystallization temperature of inclusions in SUS304 stainless steelEhara, Y. et al. | 2004
- 754
-
Surface quality improvement of stainless steel at billet casterOota, Y. et al. | 2004
- 755
-
Improvement of surface deffects in stainless steel bottom slabsWatanabe, M. et al. | 2004
- 756
-
Effect of steel grade on oxidation rate of molten steel in still stateSasai, K. et al. | 2004
- 757
-
Operation and quality improvement of bloom CC with plasma tundish heaterYamahira, S. et al. | 2004
- 758
-
Improvement of quality of steel for bearing steel at West Japan Works (Kurashiki)Takeda, T. et al. | 2004
- 759
-
The improvement of surface cracks on leaded free-cutting steel bloomOhba, Y. et al. | 2004
- 760
-
(ISIJ Research Promotion Grant)Effect of alloying elements on the dissociation rate of nitrogen at the surface of molten ironNakazato, H. et al. | 2004
- 761
-
Nitrogen removal from molten iron to gas phase through CaO-Al~2O~3 meltSatou, T. et al. | 2004
- 762
-
Development and evaluation of electromagnetically driven wideband ultrasonic oscillatorOhara, M. et al. | 2004
- 763
-
Effect of ultrasonic wave on degradation of organic chemical substanceYoshida, Y. et al. | 2004
- 764
-
Gas injection into mercury from ultrasound vibrating orificeOkumura, K. et al. | 2004
- 765
-
Effect of blade on prevention of suction vortexMasuno, T. et al. | 2004
- 766
-
Water model experiments on attachment and removal of particles from liquid by bubblesIida, N. et al. | 2004
- 767
-
Effects of immersion cylinder on the dispersion of low density particles by mechanical agitationSukawa, T. et al. | 2004
- 768
-
Mixing time in tapered vessel agitated by gas injectionKosaka, Y. et al. | 2004
- 769
-
Mixing time in a cylindrical bath agitated by off-centered swirling liquid jetIguchi, D. et al. | 2004
- 770
-
Swirl motion of bubbling jet in inclined cylindrical bathSato, T. et al. | 2004
- 771
-
Analysis of flow in and around a droplet on its rapture stage at a liquid-liquid interfaceKagawa, T. et al. | 2004
- 772
-
Swirl motion of stratified two liquid layers induced by top lance gas injectionKumagai, T. et al. | 2004
- 773
-
Process parameters for inclined-vortex formation by mechanical offset agitationOhmi, T. et al. | 2004
- 774
-
(ISIJ Research Promotion Grant)Normal spectral emissivity of undercooled liquid silicon and the mechanism of thermal radiationKawamura, H. et al. | 2004
- 775
-
Accurate measurement of the sound velocity and ultrasonic absorption of liquid tinYamada, H. et al. | 2004
- 776
-
Viscosity of molten Fe-Si binary alloySato, Y. et al. | 2004
- 777
-
Electronic polarisability of oxygen and charge transfer band edge for slags containing iron oxide in terms of electron donor power of oxygenFiroz, S. H. et al. | 2004
- 778
-
Effect of Al~2O~3 on viscosity in multi-component molten slagNakamoto, M. et al. | 2004
- 779
-
Advantage of multinuclear solid-state NMR to structural analysis of slagKanehashi, K. et al. | 2004
- 780
-
Grain growth of beta-silicon nitride dispersed in RE-Mg-Si-O-N meltsSaito, N. et al. | 2004
- 781
-
Heat transfer across mold flux from perspective of its degree of crystallintyOzawa, S. et al. | 2004
- 782
-
Thermal conductivity of the CaO-Al~2O~3-SiO~2 systemKang, Y. et al. | 2004
- 783
-
Thermal properties measurement of CaO-SiO~2 system fluxes with square wave pulse heating methodKawachi, S. et al. | 2004
- 784
-
Prevention of resulfurization in the desulfurization process of molten iron with Mg vapor injectionYang, J. et al. | 2004
- 785
-
Desulfurization of hot metal by solid CaO using capillary refiningOgiso, Y. et al. | 2004
- 786
-
Effect of aluminum addition on hot metal desulfurizationNaito, K. et al. | 2004
- 787
-
Effect of top blowing oxygen on the dephosphorization of hot metal by mechanical stirring methodAizawa, M. et al. | 2004
- 788
-
Kinetics of iron oxide formation under the condition of oxygen top blowing on hot metal-2Matsui, A. et al. | 2004
- 789
-
Behavior of spitting during blowing in BOFUeyama, T. et al. | 2004
- 790
-
BOF operation of low hot metal ratio based on dephosphorized hot metalTsunoda, A. et al. | 2004
- 791
-
Reduction of tapping temperature by the heat insulating cover in ladleShirosawa, H. et al. | 2004
- 792
-
Effect of grain size distribution of MgO clinker on oxidation rate of MgO-C brickSunayama, H. et al. | 2004
- 793
-
Improvement of decarburization characteristics of No.2RH in Kimitsu WorksTanabe, K. et al. | 2004
- 794
-
Nitrogen control for high-Cr steel ingot on vacuum castingMorinaka, K. et al. | 2004
- 795
-
Effect of addition of REM elements on inclusions in Si killed stainless steelOkuyama, G. et al. | 2004
- 796
-
Estimation of the reduction of CaO-containing wustite with CO-CO~2 gas mixtureInami, T. et al. | 2004
- 797
-
Mass transfer in metallic iron layer at rapid reduction of iron oxide by CH~4 gasMaeda, K. et al. | 2004
- 798
-
Kinetic analysis of iron-oxide reduction by vapor deposited carbonSeki, I. et al. | 2004
- 799
-
Relative contribution of the direct and indirect reactions during heating carbon composite iron ore pelletsYokomoto, S. et al. | 2004
- 800
-
Reaction behavior of coal composite iron ore hot briquettes at elevated temperaturesHayashi, S. et al. | 2004
- 801
-
Effect of channeling factor on liquid hold-ups in packed bedShinmyou, K. et al. | 2004
- 802
-
Specificity of granulation with dispersant (Development of the intensified granulation technique in iron ore sintering-4)Kono, K. et al. | 2004
- 803
-
The application of dispersants under the burnt lime existence condition (Development of the intensified granulation technique in iron ore sintering-5)Miura, S. et al. | 2004
- 804
-
Increase in sintering productivity with dispersant (Development of the intensified granulation technique in iron ore sintering-6)Okada, T. et al. | 2004
- 805
-
Water condensation in sinter bed under using a large amount of limonitic oresOtomo, T. et al. | 2004
- 806
-
Influence of limestone and coke breeze coating time on the quasi-particle structureOyama, N. et al. | 2004
- 807
-
Effect of the number-of-rotations distribution of roller on sinter feed segregation (Development of new feeding equipment for controlling charge segregation of sinter feed-2)Matsumura, T. et al. | 2004
- 808
-
Dissolution rate of Fe~2O~3 into calcium ferrite meltYamano, Y. et al. | 2004
- 809
-
Development of a 3 dimensional mathematical simulation model of sintering processYamaoka, H. et al. | 2004
- 810
-
Suitable production condition of pre-reduced agglomerates (Development of process for pre-reduced agglomerates production-1)Machida, S. et al. | 2004
- 811
-
Mineralogy and low-temperature reduction behavior of hematite compacts sintered under plant conditions (Influence of microstructure on the reduction behavior of hematite-3)Higuchi, K. et al. | 2004
- 812
-
Effect of dolomite sinter under high temperature sinter condition on soften propertiesMatsumura, M. et al. | 2004
- 813
-
(Invited Lecture)A gasification process of carbonaceous residues by steam plasmaNishikawa, H. et al. | 2004
- 814
-
(Invited Lecture)Chemical and thermal non-equilibrium model of high-power Ar-N~2 pulse-modulated induction thermal plasmasTanaka, Y. et al. | 2004
- 815
-
(Invited Lecture)Investigation of reaction mechanism of ion exchange resin treated by reactive thermal plasmasNezu, A. et al. | 2004
- 816
-
(Invited Lecture)Development of high thermal efficiency plasma reactorSakiyama, S. et al. | 2004
- 817
-
(Invited Lecture)Characteristics of hollow cathode arc as a welding heat sourceShobako, S. et al. | 2004
- 818
-
Characteristics of voltage for twin torch plasma arc as function of current and arc lengthYuza, Y. et al. | 2004
- 819
-
(Invited Lecture)Burr removal process using arc dischargeKusumoto, K. et al. | 2004
- 820
-
Observations of GTA plasma constricted by CO~2 shielding gasSakamoto, E. et al. | 2004
- 821
-
New deoxidation method of steel utilizing interfacial free energy differenceWasai, K. et al. | 2004
- 822
-
Dependence of interfacial tension on electric potential and migration of metal droplets under electric fieldInoue, K. et al. | 2004
- 823
-
Surface tension of liquid Fe-Cr-O alloysYamamoto, K. et al. | 2004
- 824
-
Effect of Lorentz force on liquid droplets around the slag-metal interfaceKozuka, T. et al. | 2004
- 825
-
Theoretical analysis of isothermal growth of liquid film accompanied by counter diffusion from bounded interfaceKurimoto, M. et al. | 2004
- 826
-
Fine bubble formation from a porous nozzle with vertical wallOkano, K. et al. | 2004
- 827
-
Investigation of behavior of micro-jets caused by acoustic cavitation in liquidKubo, T. et al. | 2004
- 828
-
Effects of bubble attachment to sliding gate on flow in immersion nozzleMaeda, D. et al. | 2004
- 829
-
Effects of wettability on rising gas-liquid flow in vertical circular pipeFukushi, K. et al. | 2004
- 830
-
Kure No.2BF operation with oil injectionSugahara, N. et al. | 2004
- 831
-
Low RAR operation by injecting high CVL coalOrimoto, T. et al. | 2004
- 832
-
The high productivity and low coke rate operation at Kakogawa No.3 BFTagawa, T. et al. | 2004
- 833
-
Numerical analysis on blast furnace performance under operation with waste plastics injection and top gas recyclingChu, M. et al. | 2004
- 834
-
Development of high dispersive lance for pulverized coal injectionKashihara, Y. et al. | 2004
- 835
-
Stabilization of tapping hole length by control of blast furnace raceway depthMatsui, Y. et al. | 2004
- 836
-
Effect of flow behavior of particle into raceway on raceway formationSawayama, M. et al. | 2004
- 837
-
Effects of gasification and smelting reduction on coke degradationNatsui, T. et al. | 2004
- 838
-
Effects of structural change of coke particle due to solution loss reaction on degradation behaviorSato, S. et al. | 2004