Application of Internal Fusible Chills in Thick‐Walled Castings Made of EN‐GJS with an Optimized Microstructure (English)
- New search for: Krupa, Wojciech
- New search for: Tonn, Babette
- New search for: Krupa, Wojciech
- New search for: Tonn, Babette
- New search for: Chinesta, Francisco
- New search for: Chastel, Yvan
- New search for: El Mansori, Mohamed
In:
AIP Conference Proceedings
;
1315
, 1
;
627-632
;
2011
- Article (Journal) / Electronic Resource
-
Title:Application of Internal Fusible Chills in Thick‐Walled Castings Made of EN‐GJS with an Optimized Microstructure
-
Contributors:Krupa, Wojciech ( author ) / Tonn, Babette ( author ) / Chinesta, Francisco ( editor ) / Chastel, Yvan ( editor ) / El Mansori, Mohamed ( editor )
-
Published in:AIP Conference Proceedings ; 1315, 1 ; 627-632
-
Publisher:
- New search for: American Institute of Physics
-
Publication date:2011-01-17
-
Size:6 pages
-
ISSN:
-
DOI:
-
Type of media:Article (Journal)
-
Type of material:Electronic Resource
-
Language:English
-
Keywords:
-
Source:
Table of contents – Volume 1315, Issue 1
The tables of contents are generated automatically and are based on the data records of the individual contributions available in the index of the TIB portal. The display of the Tables of Contents may therefore be incomplete.
- 3
-
A constitutive model for multi‐phase steelsPerdahcíoğlu, E. S. / Geijselaers, H. J. M. et al. | 2011
- 9
-
Capabilities Of Micro Powder Injection Molding For Microparts ManufacturingKong, X. / Barriere, T. / Gelin, J. C. et al. | 2011
- 15
-
Comparison of the Folding Behaviour in the Empty and Foam‐Filled Honeycombs via Drop Hammer TestsNiknejad, A. / Liaghat, G. H. / Naeini, H. Moslemi / Behravesh, A. H. et al. | 2011
- 21
-
Cyclic nanoindentation studies on CrN thin films prepared by RF sputtering on Zr‐based metallic glassJellad, A. / Labdi, S. / Benameur, T. et al. | 2011
- 27
-
Damage of Aluminium Matrix Composite reinforced with Iron Oxide Experimental and Numerical StudyAyari, F. / Katundi, D. / Bayraktar, E. et al. | 2011
- 33
-
Evaluating print performance of Sn‐Ag‐Cu lead‐free solder pastes used in electronics assembly processMallik, S. / Bauer, R. / Hübner, F. / Ekere, N. N. et al. | 2011
- 39
-
Experimental and Numerical Investigation of Forming Limit Diagram for AA3105Safari, Mehdi. / Hoseinipour, S. J. / Azodi, H. D. / Yousefzadeh, Sh. et al. | 2011
- 45
-
Experimental and Theoretical Investigation of Forming Limit Diagram (FLD) and Forming Limit Stress Diagram (FLSD) For Aluminum Alloy 3105Safari, Mehdi. / Hoseinipour, S. J. / Azodi, H. D. / Yousefzadeh, Sh. et al. | 2011
- 51
-
Fabrication of Metal Particles Embedded Aluminum Matrix Composite by Friction Stir Processing (FSP)Yadav, Devinder / Bauri, Ranjit et al. | 2011
- 57
-
Heterogeneous Biaxial Tensile Tests For The Characterization Of Sheet Metals Plastic AnisotropyTeaca, M. / Martiny, M. / Charpentier, I. / Ferron, G. et al. | 2011
- 63
-
Innovative Technologies to Manufacture Hybrid Metal Foam/Composite ComponentsCarrino, L. / Durante, M. / Franchitti, S. / Sorrentino, L. / Tersigni, L. et al. | 2011
- 69
-
Effect of Controlled Hot Rolling Parameters on Microstructure of a Nb‐Microalloyed Steel SheetKhaki, Daavood Mirahmadi / Abedi, Amir et al. | 2011
- 75
-
Measurement and Analysis of the Biaxial Loading and Unloading Behavior of AZ31 Mg Alloy SheetAndar, Mohammad Omar / Steglich, Dirk / Kuwabara, Toshihiko et al. | 2011
- 81
-
Mechanical Properties of Aluminum Matrix Composite Reinforced by Carbothermally Reduced of Fly AshJamasri / Wildan, M. W. / Sulardjaka / Kusnanto et al. | 2011
- 86
-
Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix CompositeSayuti, M. / Sulaiman, S. / Baharudin, B. T. H. T. / Arifin, M. K. A. / Suraya, S. / Vijayaram, T. R. et al. | 2011
- 92
-
Microstructural Evolution and Mechanical Properties of Cold‐deformed Al‐5Cu Alloy Samples After Isothermal Heat TreatmentsSaklakoglu, Nursen / Gencalp, Simge et al. | 2011
- 98
-
Plastic deformation in sheet metal including multi‐size voidsNakayama, Yasuhide / Naka, Tetsuo / Shimizu, Ichiro et al. | 2011
- 104
-
Probing Martensitic Transition in Nitinol Wire: A Comparison of X‐ray Diffraction and Other TechniquesButler, J. / Tiernan, P. / Tofail, S. A. M. / Ghandi, A. A. et al. | 2011
- 110
-
Substitution of Nickel by Combined Addition of Cobalt and Zirconium in Alloy A 332Wüstenhagen, Andreas / Tonn, Babette et al. | 2011
- 116
-
Threading on ADI Cast Iron, Developing Tools and ConditionsElósegui, I. / de Lacalle, L. N. López et al. | 2011
- 122
-
Ultra‐Fine Grain Structures Of Model Al‐Mg‐Si Alloys Produced By Hydrostatic ExtrusionAdamczyk‐Cieślak, Bogusława / Mizera, Jarosław et al. | 2011
- 131
-
A Morphological Study of Isotactic Polypropylene (iPP) Blended with Styrene‐ethylene‐butylene‐styrene (SEBS) Thermoplastic ElastomersBuggy, M. / Ryan, E. A. et al. | 2011
- 137
-
Bio‐composite Nonwoven Media Based on Chitosan and Empty Fruit Bunches for Wastewater ApplicationSadikin, Aziatul Niza / Nawawi, Mohd Ghazali Mohd / Othman, Norasikin et al. | 2011
- 143
-
Biopolymers Processing Experimentation by Micro Injection MouldingMarquez, Juan J. / Rueda, Jesus et al. | 2011
- 149
-
Damage of Elastomeric Matrix Composites (EMC‐rubbers) Under Static Loading Conditions: Experimental and Numerical StudyAyari, F. / Bayraktar, E. / Zghal, A. et al. | 2011
- 155
-
Analysis on Geometrical Accuracy of Microhole during Micro‐EDM of Ti‐6Al‐4V using Different DielectricsKibria, G. / Bhattacharyya, B. et al. | 2011
- 161
-
Investigation of the influence of packing pressure on crystallization kinetics of a semi‐crystalline polymer using in situ temperature measurement during injection mouldingLe, M.‐C. / Belhabib, S. / Nicolazo, C. / Sarda, A. / Deterre, R. / Vachot, P. et al. | 2011
- 167
-
Melt state behaviour of PEEK and processing window interpretation for fast compression moulding processBessard, Emeline / De Almeida, Olivier / Bernhart, Gérard et al. | 2011
- 173
-
MISCIBILITY AND MORPHOLOGY OF POLY(LACTIC ACID)/POLY(Β‐HYDROXYBUTYRATE) BLENDSTri Phuong, Nguyen / Guinault, Alain / Sollogoub, Cyrille et al. | 2011
- 179
-
Modeling the nonlinear PMMA behavior near glass transition temperature: application to its thermoformingGilormini, P. / Chevalier, L. / Régnier, G. et al. | 2011
- 185
-
An Improvement in Thermal Modelling of Automated Tape Placement ProcessBarasinski, Anaïs / Leygue, Adrien / Soccard, Eric / Poitou, Arnaud et al. | 2011
- 191
-
Optimization of an Extrusion Die for Polymer FlowRidene, Y. Chahbani / Graebling, D. / Boujelbene, M. et al. | 2011
- 197
-
Optimizing Composites Forming Processes by Applying the Proper Generalized DecompositionGhnatios, C. / Chinesta, F. / Cueto, E. / Leygue, A. / Poitou, A. et al. | 2011
- 203
-
PGD and separated space variables representation for linear elasticity in 3D representation of plate domainsBognet, B. / Leygue, A. / Chinesta, F. / Poitou, A. et al. | 2011
- 209
-
Recycling By Solvolysis Thermosetting Composite Materials Of Sustainable Surface TransportOliveux, Géraldine / Le Gal La Salle, Eric / Bailleul, Jean‐Luc et al. | 2011
- 215
-
THE EFFECT OF REPROCESSING ON THE TENSILE PROPERTIES OF COMPOSITESBodur, Mehmet Safa / Bakkal, Mustafa / Berkalp, Omer Berk / Sadikoglu, Telem Gok et al. | 2011
- 221
-
Viscoelastic Characterization of Polytetrafluoroethylene (PTFE) Polymer by Sharp IndentationStan, Felicia / Munteanu, Ana V. / Fetecau, Catalin et al. | 2011
- 227
-
Sealing Force Increasing of ACM Gasket through Electron Beam Radiationdos Santos, D. J. / Batalha, G. F. et al. | 2011
- 235
-
Design of Natural Hydroxyapatite as bio‐composite ceramics (HAP): Experimental and Numerical StudyBelghazi, Z. / Katundi, D. / Ayari, F. / Bayraktar, E. et al. | 2011
- 241
-
DURABILITY OF WASTE GLASS FLAX FIBER REINFORCED MORTARAly, M. / Hashmi, M. S. J. / Olabi, A. G. / Messeiry, M. et al. | 2011
- 247
-
Effect Of Illumination On Silicon Based MIS Structure By E‐Beam Technique For IC Manufacturing TechnologyPaul, Swarup / Ghosh, Biswajit et al. | 2011
- 253
-
Effect On The Processing Characteristics Of ZnO Varistors Produced Using Vibratory MillingKelleher, M. C. / Hashmi, M. S. J. et al. | 2011
- 259
-
Finite Element Simulation of Diametral Strength Test of HydroxyapatiteOzturk, Fahrettin / Evis, Zafer / Toros, Serkan et al. | 2011
- 265
-
Microemulsion Synthesis of Nanoparticle PZT PowderAmiriyan, M. / Nemati, Z. A. / Rahmanifar, M. S. / Ramesh, S. / Meenaloshini, S. / Tolouei, R. et al. | 2011
- 271
-
Silica Sand Etching Behavior During a Primary Step of its Leaching ProcessAbdelkrim, Kheloufi / Yassine, Berbar / Aissa, Kefaifi / Nadjib, Drouiche et al. | 2011
- 277
-
Facile Synthesis and Characterizations of MOF‐5 Coordination Polymer with Various Metal Linker Ratios for Ammonia Gas StorageMisran, Halina / Aminuddin, A. M. / Zini, F. A. M. / Ghazali, M. J. / Ramesh, S. et al. | 2011
- 283
-
The Influence of Manganese Oxide on the Sintering Behavior of Yttria Tetragonal ZirconiaMeenaloshini, S. / Amiriyan, M. / Sankar, U. / Tolouei, R. / Ramesh, S. et al. | 2011
- 289
-
To overcome the appearance of the efflorescences by magnesium carbonate addition in a mass for manufacture of bricks of constructionChemani, H. et al. | 2011
- 297
-
A Simplified Inverse Approach for the Simulation of Axi‐Symmetrical Cold Forging ProcessHalouani, A. / Li, Y. M. / Abbès, B. / Guo, Y. Q. et al. | 2011
- 303
-
FEA Based Tool Life Quantity Estimation of Hot Forging Dies Under Cyclic Thermo‐Mechanical LoadsBehrens, B.‐A. / Bouguecha, A. / Schäfer, F. / Hadifi, T. et al. | 2011
- 309
-
Hardness Property of Resistance‐Heated and Rapidly Cooled Steel Sheet for Die‐Quenching UseMaki, Seijiro et al. | 2011
- 315
-
Manufacturing of Precision Forgings by Radial ForgingWallner, S. / Harrer, O. / Buchmayr, B. / Hofer, F. et al. | 2011
- 321
-
Simulation of cold forging under consideration of residual stresses induced by preceding drawingHatzenbichler, Thomas / Buchmayr, Bruno / Walzl, Alexander et al. | 2011
- 329
-
An Investigation into the Effect of Aging on the Forming Limit Diagram of 6063 Aluminum AlloyHosseini, S. M. / Hosseimpour, S. J. / Nourouzi, S. / Gorji, A. H. et al. | 2011
- 335
-
Characteristic of wear behavior of micro deep drawing toolsHu, Z. / Huferath‐von Luepke, S. / von Kopylow, C. / Vollertsen, F. et al. | 2011
- 341
-
Computer Aided Design of Die Surface with Three‐Dimensional Free‐Form Surface for Sheet Metal StampingMakiyama, Takahiro / Teramae, Toshiya / Sato, Toshimi et al. | 2011
- 347
-
Draw Bending of Dissymmetric Channel Section with Variable Axial TensionOkude, Yusuke / Sakaki, Shuji / Yoshihara, Shoichiro et al. | 2011
- 353
-
Effect of Equal Biaxial Pre‐Strain on Forming Limit Diagram of AA5083Zhalehfar, F. / Hosseinipour, S. J. / Nourouzi, S. / Gorji, A. H. et al. | 2011
- 359
-
Enhancement Of Forming Limits Of Aluminum Alloys Using An Intermediate Heat TreatmentSiefert, Kathleen / Merklein, Marion / Nester, Winfried / Grünbaum, Martin et al. | 2011
- 365
-
Experimental and Numerical Investigation of Forming and Springback Behavior and the Resulting Effects on Industrial Application on a Structural Part in Mass ProductionPrexl, A. / Golle, M. / Hoffmann, H. / Kudraß, S. / Wahl, M. et al. | 2011
- 371
-
Finite Element Analysis of Influence of Material Anisotropy on the Springback of Advanced High Strength SteelSafaei, Mohsen / De Waele, Wim / Hertschap, Kris et al. | 2011
- 377
-
Finite Element Modeling of a Non‐Isothermal Superplastic‐Like Forming ProcessLiu, Jun / Tan, Ming‐Jen / Castagne, Sylvie / Aue‐u‐lan, Yingyot / Jarfors, Anders E. W. / Fong, Kai‐Soon / Bayraktar, Emin et al. | 2011
- 383
-
Forming Limit Prediction of Sheet Metals Subjected to Combined Loading Using Forming Limit Stress CurveSugawara, Fuminori / Yoshida, Kengo / Kuwabara, Toshihiko / Taomoto, Naoki / Yanagi, Naoki et al. | 2011
- 389
-
Influence of Die and Punch Profile Radii on Deep Drawing Force and Punch Load‐ Displacement DiagramMansourinejad, M. / Mirzakhani, B. / Pishbin, H. / Amadeh, A. / Farshchian, B. et al. | 2011
- 395
-
Investigation Of Tailored Blank Production By The Process Class Sheet‐Bulk Metal FormingMerklein, M. / Opel, S. et al. | 2011
- 401
-
New Modelling of Localized Necking in Sheet Metal StretchingBressan, José Divo et al. | 2011
- 407
-
Numerical and Experimental Study on Hydrodynamic Deep Drawing of Hemispherical CupsShamsi‐Sarband, S. / Hosseimpour, S. J. / Bakhshi‐Jooyban, M. et al. | 2011
- 413
-
Numerical Determination of Sheet Metal Formability under Simultaneous Stretching and BendingMartinezhyphen;Lopez, A. / van den Boogaard, A. H. et al. | 2011
- 419
-
Prediction of Springback After Draw‐Bending Test Using Different Material ModelsRacz, Sever‐Gabriel / Khan, Salim / Chalal, Hocine / Abed‐Meraim, Farid / Balan, Tudor et al. | 2011
- 425
-
Prediction of the Forming Limit Band for Steel Sheets using a new Formulation of Hora’s Criterion (MMFC)Sorin Comsa, Dan / Dragos, George / Paraianu, Liana / Banabic, Dorel et al. | 2011
- 431
-
Punchless Drawing of Magnesium Alloy Sheet under Cold Condition and its ComputationYamashita, Minoru / Hattori, Toshio / Sato, Joji et al. | 2011
- 437
-
Surface defects on thin sheets after flangingLe Port, Alban / Thuillier, Sandrine / Manach, Pierre‐Yves et al. | 2011
- 443
-
Theoretical Approach Including Friction for Determining Strain Limits in Punch Stretching of Anisotropic Sheet MetalsDe Souza, L. H. B. / Menezes, M. A. / Filho, L. A. Moreira et al. | 2011
- 451
-
Improvement of Die Corner Filling in Box‐shape Stepped Tubes HydroformingHosseini‐Farrash, S. H. / Elyasi, M. / Bakhshi‐Jooybari, M. / Gorji, A. et al. | 2011
- 457
-
Comparison of forming conical parts by hydroforming and conventional deep drawing processesYaghoubi, A. R. / Bakhshi‐Jooybari, M. / Gorji, A. / Norouzi, S. et al. | 2011
- 463
-
Experimental study and finite element simulation of the effect of cone angle on drawing ratio and thickness distribution in hydroforming of conical‐cylindrical cupsSepehrizadeh, M. / Gorji, A. / Zareh, B. / Bakhshi‐Jooybari, M. / Norouzi, S. et al. | 2011
- 469
-
Forming conical parts with sharp tip in sheet hydroforming processGorji, A. / Bakhshi‐Jooybari, M. / Nourouzi, S. / Mohammad‐Alinejad, G. et al. | 2011
- 475
-
Investigation of Aluminum‐Copper Tube Hydroforming with Axial FeedingParto D., M. / Seyedkashi, S. M. H. / Liaghat, Gh. / Naeini, H. Moslemi / Panahizadeh R., V. et al. | 2011
- 481
-
Multi‐response Optimization of Geometrical Factors in Bi‐layered Tube HydroformingAlaswad, A. / Olabi, A. G. / Benyounis, K. Y. et al. | 2011
- 489
-
A Study of Tube Extrusion ProcessHaghighat, H. / Mohammadinoori, S. et al. | 2011
- 495
-
Coupled analysis of material flow and die deflection in direct aluminum extrusionAssaad, W. / Geijselaers, H. J. M. et al. | 2011
- 501
-
Extrusion Die Design and Process Simulation of High Strength Aluminium AlloySheu, Jinn‐Jong / Chen, Yan‐Hong / Su, Guan‐Cheng et al. | 2011
- 507
-
Finite Element Simulation of Twist Extrusion on ECAPed Al6061 SpecimenRaj, K. Hans / Sharma, Rahul Swarup / Sahai, Ankit / Sharma, Shanti S. et al. | 2011
- 513
-
Formation of Seam and Charge Welds in 2D Extrusion WeldingAbbas Khan, Yawar / Valberg, Henry et al. | 2011
- 519
-
Influence of Punch Geometry on Process Parameters in Cold Backward ExtrusionPlančak, M. / Barišić, B. / Car, Z. / Movrin, D. et al. | 2011
- 524
-
Prediction of Central Burst Defects in Copper Wire Drawing ProcessVega, G. / Haddi, A. / Imad, A. et al. | 2011
- 530
-
Study of Multi Pass Equal Channel Angular Pressing Using 3D Finite Element AnalysisSetia, Rajat / Sharma, Rahul Swarup / Sharma, Shanti Swarup / Raj, K. Hans et al. | 2011
- 536
-
Texture and Grain Refinement in Equal Channel Angular Pressing Using Round Corner DiesPadhye, R. S. / Milind, T. R. / Date, P. P. et al. | 2011
- 545
-
Contact Pressure Measurement System in Cross Wedge RollingMangin, Philippe / Langlois, Laurent / Bigot, Régis et al. | 2011
- 551
-
Strip edge cracking simulation in cold rollingHubert, C. / Dubar, L. / Dubar, M. / Dubois, A. et al. | 2011
- 557
-
Geometrical accuracy improvement in flexible roll forming linesLarrañaga, J. / Berner, S. / Galdos, L. / Groche, P. et al. | 2011
- 563
-
In‐Line Heat Treatment and Hot RollingRaudensky, M. / Horsky, J. / Hnizdil, M. P. / Pohanka, Kotrbacek M. et al. | 2011
- 569
-
Innovations in Rolling Process of Helical GearsNeugebauer, R. / Hellfritzsch, U. / Lahl, M. / Schiller, S. / Milbrandt, M. et al. | 2011
- 575
-
Local Thickening of Stainless Tube Considering Dimension Variation of the Cold Roll Formed Tube BilletSheu, Jinn‐Jong / Yu, Cheng‐Hsien et al. | 2011
- 581
-
Numerical and Experimental Investigation of Roll Forces and Torques in Cold Roll Forming of a Channel Sectiondavoodi, B. / Naeini, H. Moslemi / Asl, Y. Dadgar / Azizi T., R. / Kasaei, M. M. / Panahizadeh, V. R. et al. | 2011
- 587
-
Roll Shape Design for Foil Rolling of a Four‐High MillHwang, Yeong‐Maw / Kan, Cheng‐Chuan et al. | 2011
- 593
-
Numerical and experimental investigation of strip deformation in cage roll forming process for pipes with low ratio of thickness/diameterKasaei, M. M. / Naeini, H. Moslemi / Tehrani, M. Salmani / Tafti, R. Azizi et al. | 2011
- 601
-
Enhancement of Incremental Sheet Metal Forming Technology by Means of Stretch FormingGaldos, L. / Sukia, A. / Otegi, N. / Ortubay, R. / Ruiz De La Torre, A. / Forgas, A. / Rastellini, F. et al. | 2011
- 607
-
Experimental, Statistical and Simulation Study on Spring‐back Behavior in Incremental Sheet Metal Forming (ISMF) ProcessVahdati, Alireza / Vahdati, Mehdi et al. | 2011
- 613
-
Improving process performance in Incremental Sheet Forming (ISF)Ambrogio, G. / Filice, L. / Manco, G. L. et al. | 2011
- 619
-
Numerical Simulation of Incremental Sheet Forming by Simplified ApproachDelamézière, A. / Yu, Y. / Robert, C. / Ayed, L. Ben / Nouari, M. / Batoz, J. L. et al. | 2011
- 627
-
Application of Internal Fusible Chills in Thick‐Walled Castings Made of EN‐GJS with an Optimized MicrostructureKrupa, Wojciech / Tonn, Babette et al. | 2011
- 633
-
Effect of flask vibration time on casting integrity, Surface Penetration and Coating Inclusion in lost foam casting of Al‐Si AlloyKarimian, Majid / Idris, M. H. / Ourdjini, A. / Muthu, Kali et al. | 2011
- 639
-
Investigation Of The Effects Of Reflow Profile Parameters On Lead‐free Solder Bump Volumes And Joint IntegrityAmalu, E. H. / Lui, Y. T. / Ekere, N. N. / Bhatti, R. S. / Takyi, G. et al. | 2011
- 645
-
Structure and mechanical properties of Al‐3Fe rapidly solidified alloyKaraköse, Ercan / Keskin, Mustafa et al. | 2011
- 650
-
Roll Casting of Aluminum Alloy Clad StripNakamura, R. / Haga, T. / Tsuge, H. / Watari, H. / Kumai, S. et al. | 2011
- 656
-
Solidification Microstructure of AISI M2 High Speed Steel Manufactured by the Horizontal Continuous Casting ProcessZhou, X. F. / Fang, F. / Jiang, J. Q. et al. | 2011
- 662
-
The Impact of Ceramic Shell Strength on Hot Tearing during Investment CastingNorouzi, Saeid / Farhangi, Hassan et al. | 2011
- 671
-
A Study on the Optimization for Metal Injection Molding ProcessJung, M. K. / Jang, K. C. / Lee, D. G. / Kim, M. H. et al. | 2011
- 677
-
Development and characterization of polymers‐metallic hot embossing process for manufacturing metallic micro‐partsSahli, M. / Millot, C. / Gelin, J‐C / Barrière, T. et al. | 2011
- 683
-
End Uses Mechanical Properties Settled By The Modified Sintering Conditions Of The Metal Injection Molding ProcessMarray, Tarek / Jaccquet, Philippe / Moinard‐Checot, Delphine / Fabre, Agnès / Barrallier, Laurent et al. | 2011
- 689
-
Injection Molding Parameter Optimization of Ti‐6Al‐4V Powder Mix With Palm Stearin and Polyethylene for Highest Green Strength Using Taguchi MethodNor, N. H. Mohamad / Muhamad, N. / Ruzi, M. / Ahmad, S. / Ibrahim, M. H. I. / Jamaludin, K. R. et al. | 2011
- 695
-
Modelling for Injection Moulding Process Based on Principal Component Regression MethodGu., Nong / Creighton, Dougas / Nahavandi, Saeid et al. | 2011
- 701
-
Investigation of the adhesion interface obtained through two‐component injection moldingFetecau, Catalin / Stan, Felicia / Dobrea, Daniel et al. | 2011
- 707
-
Microstructure and Mechanical Performance Analysis of Metal‐injection‐molded Fe‐2Ni Sintered ComponentsLin, Kuan‐Hong / Hsieh, Yu‐Chan / Lin, Shun‐Tian et al. | 2011
- 713
-
Optimization of Micro Metal Injection Molding By Using Grey Relational GradeIbrahim, M. H. I. / Muhamad, N. / Sulong, A. B. / Nor, N. H. M. / Jamaludin, K. R. / Harun, M. R. / Murtadhahadi et al. | 2011
- 719
-
Permanent Mold Casting of JIS‐AC4C Aluminum Alloy Using a Low‐Temperature MoldYamagata, Hiroshi / Nikawa, Makoto et al. | 2011
- 727
-
A Cellular Automaton / Finite Element model for predicting grain texture development in galvanized coatingsGuillemot, G. / Avettand‐Fènoël, M.‐N. / Iosta, A. / Foct, J. et al. | 2011
- 733
-
A Study Of An Ultrasonically Assisted Metal Forming TestAbdul Aziz, Sa’ardin / Lucas, Margaret et al. | 2011
- 739
-
Thermal Stresses in Thick Walled Cylinders Subjected to a Periodic Moving Heat SourceAlzaharnah, Iyad et al. | 2011
- 745
-
Effect of Shot Peening on Surface Chracteristics of Carbon Steel with Different Heat TreatmentsHarada, Yasunori / Yakura, Ryota et al. | 2011
- 751
-
Effects Of Thermal Exchange On Material Flow During Steel Thixoextrusion ProcessEric, Becker / Guochao, Gu / Laurent, Langlois / Raphaël, Pesci / Régis, Bigot et al. | 2011
- 757
-
Electric Discharge Sintering and Joining of Tungsten Carbide—Cobalt Composite with High‐Speed Steel SubstrateGrigoryev, Evgeny G. et al. | 2011
- 763
-
Increase of Acting Pressure by Adjusted Tool Geometry in Laser Shock FormingWielage, Hanna / Vollertsen, Frank et al. | 2011
- 769
-
Investigation of the Phase Formation of AlSi‐Coatings for Hot Stamping of Boron Alloyed SteelVeit, R. / Hofmann, H. / Kolleck, R. / Sikora, S. et al. | 2011
- 775
-
Partial Multi‐Walled Metal Parts Open Up New Technical SolutionsGross, Heinz G. et al. | 2011
- 781
-
Producing Magnesium Metallic Glass By Disintegrated Melt DepositionShanthi, M. / Gupta, M. / Jarfors, A. E. W. / Tan, M. J. et al. | 2011
- 787
-
Effects of Vibrations on Metal Forming Process: Analytical Approach and Finite Element SimulationsArmaghan, Khan / Christophe, Giraud‐Audine / Gabriel, Abba / Régis, Bigot et al. | 2011
- 793
-
Toward Oxide Scale Behavior Management At High TemperatureDeltombe, R. / Dubar, M. / Dubois, A. / Dubar, L. et al. | 2011
- 801
-
A Fatigue Life Prediction Model of Welded Joints under Combined Cyclic LoadingGoes, Keurrie C. / Camarao, Arnaldo F. / Pereira, Marcos Venicius S. / Ferreira Batalha, Gilmar et al. | 2011
- 807
-
A Study on Analysis of Weld Distortion in Multi‐pass Arc WeldingLee, J. H. / Kim, I. S. / Jang, H. K. / Kim, H. J. / Kwak, S. K. / Ryoo, H. S. / Hong, S. H. / Shim, J. Y. et al. | 2011
- 813
-
A Study on Optimized Technology for an Automatic Root‐pass Welding of Girth Weldment in PipelineJeong, J. W. / Kim, I. S. / Kim, W. S. / Kim, Y. P. / Kim, C. M. / Kim, J. S. / Na, H. H. / Choi, J. H. et al. | 2011
- 819
-
Electric Resistance Spot Welding evaluation by A‐scan and B‐scan ultrasound analysesFurlanetto, Valdir / Stocco, Danilo / Batalha, Gilmar Ferreira et al. | 2011
- 825
-
Determination of Flaw Type and Location Using an Expert Module in Ultrasonic Nondestructive Testing for Weld InspectionShahriari, D. / Zolfaghari, A. / Masoumi, F. et al. | 2011
- 831
-
The Effect of Welding Parameters on the Tensile‐Shear Performance of Dissimilar DP600/St14 Resistance Spot WeldsPouranvari, M. / Marashi, S. P. H. / Mousavizadeh, S. M. et al. | 2011
- 837
-
FEA of Electrode Velocity Effect on Thermal Cycle and Residual Stress in Pipes Connected by Multi Pass WeldAalami‐Aleagha, M. E. / Feli, S. / Foroutan, M. / Borzabadyfarahany, E. et al. | 2011
- 843
-
Evaluation Of Four Welding Arc Processes Applied To 6061 Aluminium AlloyBenoit, A. / Paillard, P. / Baudin, T. / Jobez, S. / Castagné, J.‐F. et al. | 2011
- 848
-
Experimental Investigations on Pulsed Nd:YAG Laser Welding of C17300 Copper‐Beryllium and 49Ni‐Fe Soft Magnetic AlloysMousavi, S. A. A. Akbari / Ebrahimzadeh, H. et al. | 2011
- 854
-
Fabrication Of Double Wall Tube By U‐O Press Forming And Pulsed Gas Tungsten Arc‐weldingKasuga, Yukio / Kawamori, Shigehiro / Kuroda, Kiyoshi / Okai, Toshihiko et al. | 2011
- 860
-
Full‐Field Strain Measurement On Titanium Welds And Local Elasto‐Plastic Identification With The Virtual Fields MethodTattoli, F. / Pierron, F. / Rotinat, R. / Casavola, C. / Pappalettere, C. et al. | 2011
- 866
-
Hot Forging of a Cladded Component by Automated GMAW ProcessRafiq, Muhammad / Langlois, Laurent / Bigot, Régis et al. | 2011
- 872
-
Mechanical Characteristics of Submerged Arc Weldment in API Gas Pipeline Steel of Grade X65Hashemi, S. H. / Mohammadyani, D. et al. | 2011
- 878
-
Parametric Studies Of Weld Quality Of Tungsten Inert Gas Arc Welding Of Stainless SteelKumar Pal, Pradip / Nandi, Goutam / Ghosh, Nabendu et al. | 2011
- 884
-
Prediction of Weld Penetration in FCAW of HSLA steel using Artificial Neural NetworksAsl, Y. Dadgar / Mostafa, N. B. / Panahizadeh R., V. / Seyedkashi, S. M. H. et al. | 2011
- 890
-
Printability Optimization For Fine Pitch Solder BondingKwon, Sang‐Hyun / Lee, Chang‐Woo / Yoo, Sehoon et al. | 2011
- 896
-
THERMO‐MECHANICAL MODELING OF LASER‐MIG HYBRID WELDING (LMHW)Kounde, Ludovic / Engel, Thierry / Bergheau, Jean‐Michel / Boisselier, Didier et al. | 2011
- 902
-
Utility Theory for Evaluation of Optimal Process Condition of SAW: A Multi‐Response Optimization ApproachDatta, Saurav / Biswas, Ajay / Bhaumik, Swapan / Majumdar, Gautam et al. | 2011
- 911
-
An analysis of boundary condition effects on the thermomechanical modeling of the FSW processGuedoiri, A. / Moufki, A. / Favier, V. / Zahrouni, H. et al. | 2011
- 917
-
Mechanical behaviour of a friction stir spot welding lap under static loadingHerbelot, C. / Hoang, T. Dang / Imad, A. / Benseddiq, N. et al. | 2011
- 923
-
Dissimilar Friction Stir Welds in Al5186–Al2024: The Effect of Process Parameters on Microstructures and Mechanical PropertiesMousavi, S. A. A. Akbari / ShamAbadi, S. H. et al. | 2011
- 929
-
Effects of Post‐Weld Heat Treatment on the Mechanical Properties of Similar‐ and Dissimilar‐Alloy Friction Stir Welded BlanksZadpoor, Amir Abbas / Sinke, Jos et al. | 2011
- 935
-
Explosion Clad for Upstream Oil and Gas EquipmentBanker, John G. / Massarello, Jack / Pauly, Stephane et al. | 2011
- 941
-
Investigation on the Interface Morphologies of Explosive Welding of Inconel 625 to Steel A516 PlatesMousavi, S. A. A. Akbari / Zareie, H. R. et al. | 2011
- 947
-
Joining of Thin Metal Sheets by Shot PeeningHarada, Yasunori et al. | 2011
- 953
-
Pearson’s Functions to Describe FSW Weld GeometryLacombe, D. / Gutierrez‐Orrantia, M. E. / Coupard, D. / Tcherniaeff, S. / Girot, F. et al. | 2011
- 961
-
The effect of machining parameters on force signal and tool wear in stone cuttingyousefi, Reza / Gorjizadeh, Ashkan / Mikaeil, Reza et al. | 2011
- 967
-
The Effect of Cutting Speed in Metallic Glass GrindingSerbest, Erdinc / Bakkal, Mustafa / Karipcin, Ilker / Derin, Bora et al. | 2011
- 973
-
Grinding and its influence to ground surface durabilityHolesovsky, F. / Novak, M. et al. | 2011
- 979
-
MCF (Magnetic Compound Fluid) Polishing Process for Free‐formed Resin Device using Robotic ArmWu, Y. / Sato, T. / Lin, W. / Yamamoto, K. / Shimada, K. et al. | 2011
- 985
-
Performing in‐feed type centerless grinding process on a surface grinderXu, W. / Wu, Y. / Sato, T. / Lin, W. et al. | 2011
- 993
-
Application of Taguchi Method for Analyzing Factors Affecting the Performance of Coated Carbide Tool When Turning FCD700 in Dry Cutting ConditionGhani, Jaharah A. / Mohd Rodzi, Mohd Nor Azmi / Zaki Nuawi, Mohd / Othman, Kamal / Rahman, Mohd. Nizam Ab. / Haron, Che Hassan Che / Deros, Baba Md et al. | 2011
- 999
-
A Study of Forming Force in the Fine‐blanking Process Using the Theoretical Predication and Experimental ApproachElyasi, Majid / Daeizadeh, Vahid et al. | 2011
- 1005
-
Characteristics and Machining Performance of TiN and TiAlN Coatings on a Milling CutterSarwar, Mohammed / Haider, Julfikar et al. | 2011
- 1011
-
Chatter active control in a lathe machine using magnetostrictive actuatorNosouhi, R. / Behbahani, S. et al. | 2011
- 1017
-
Creasing Characteristics of A‐Flute Corrugated Fiber Board Using a Rotary Creaser with Respect to Breaking StrengthNagaswa, Shigeru / Takamatsu, Tomohiro / Fukuzawa, Yasushi / Tozuka, Yusuke et al. | 2011
- 1023
-
DRILLING OF INTERMETALLIC ALLOYS GAMMA TIALBeranoagirre, A. / Olvera, D. / López de Lacalle, L. N. / Urbicain, G. et al. | 2011
- 1029
-
Ductile Regime Single Point Diamond Turning of QuartzRavindra, Deepak / Patten, John et al. | 2011
- 1035
-
Effects Of Milling On Surface Integrity Of Low‐Carbon SteelRodrigues, Alessandro Roger / Matsumoto, Hidekasu / Yamakami, Wyser José / Tokimatsu, Ruís Camargo / Menezes, Miguel Ângelo / Suyama, Daniel Iwao / Norcino, Adriana Bruno / Vendrame, Saimon et al. | 2011
- 1041
-
Forging And Milling Contribution On Residual Stresses For A Textured Biphasic Titanium AlloyDeleuze, C. / Fabre, A. / Barrallier, L. / Molinas, O. et al. | 2011
- 1047
-
Sensitive analysis of a finite element model of orthogonal cuttingBrocail, J. / Watremez, M. / Dubar, L. et al. | 2011
- 1053
-
Emissivity calibration for temperature measurement using infrared thermography in orthogonal cutting of 316L and 100Cr6 grindingValiorgue, Frédéric / Brosse, Alexandre / Rech, Joël / Hamdi, Hédi / Bergheau, Jean Michel et al. | 2011
- 1059
-
Material Behavior At The Extreme Cutting Edge In BandsawingSarwar, Mohammed / Haider, Julfikar / Persson, Martin / Hellbergh, Håkan et al. | 2011
- 1065
-
Milling of Sand Blocks to Make Casting Mouldsde Lacalle, L. N. López / Rodríguez, A. / Lamikiz, A. / Peñafiel, F. J. et al. | 2011
- 1071
-
New technique of mechanical pulse jet coolant delivery system for minimal quantity lubricant (MQL) operationFazli, Nik / Badrul / Hamdi, M. et al. | 2011
- 1077
-
Optimization of Milling Parameters Employing Desirability FunctionsRibeiro, J. L. S. / Rubio, J. C. Campos / Abrão, A. M. et al. | 2011
- 1083
-
Parametric Study of End Milling Glass Fibre Reinforced CompositesAzmi, Azwan I. / Lin, Richard J. T. / Bhattacharyya, Debes et al. | 2011
- 1089
-
Principal Component Analysis in Grey Based Taguchi Method for Optimization of Multiple Surface Quality Characteristics of 6061‐T4 Aluminum in CNC End MillingDatta, Saurav / Routara, Bharat Chandra / Bandyopadhyay, Asish / Mahapatra, Siba Sankar et al. | 2011
- 1095
-
Study of the Effect of Lubricant Emulsion Percentage and Tool Material on Surface Roughness in Machining of EN‐AC 48000 AlloySoltani, E. / Shahali, H. / Zarepour, H. et al. | 2011
- 1101
-
Effect of cutting parameters on the chip formation in orthogonal cuttingM’hamdi, M. / BenSalem, S. / Boujelbene, M. / Katundi, D. / Bayraktar, E. et al. | 2011
- 1107
-
Surface Quality of Ti‐6%Al‐4%V ELI When Machined Using CVD‐Carbide Tools at High Cutting SpeedGusri, A. I. / Che Hassan, C. H. / Jaharah, A. G. / Yasir, A. / Zaid, Y. / Yanuar, B. et al. | 2011
- 1113
-
Characteristic Cutting Signals for Machined Surface Condition Monitoring in Micro milling ProcessesJang, Su‐Hoon / Jang, Ik‐Soo / Kim, Jeong‐Suk / Choi, Tae‐Ku / Gu, Min‐Su et al. | 2011
- 1119
-
Thermal Aspects of Ductile Mode Micro Laser Assisted MachiningVirkar, Saurabh R. / Patten, John A. et al. | 2011
- 1125
-
Use of Axisymmetric Shearing as Technological Test Method to gather Flow Stress Data for MetalsKandis, Janis / Valberg, Henry / Wenbin, Wu et al. | 2011
- 1131
-
Wear Mechanism of Chemical Vapor Deposition (CVD) Carbide Insert in Orthogonal Cutting Ti‐6Al‐4V ELI at High Cutting SpeedGusri, A. I. / Che Hassan, C. H. / Jaharah, A. G. et al. | 2011
- 1139
-
The Effects of Ultrasonic Vibration Parameters on Machining Performance in Turning of Mild SteelsCelaya, A. / Campa, F. J. / López de Lacalle, L. N. / Marina, D. et al. | 2011
- 1145
-
An Investigation on the Influence of Cutting‐Force’s Components on the Work‐piece Diametrical Error in Ultrasonic‐Vibration‐Assisted TurningSoleimanimehr, H. / Nategh, M. J. et al. | 2011
- 1151
-
Application of Laser Cladding in Forming Processes—Functionally Graded CoatingsWeiß, Wolfgang / Vollmer, Robert / Kolleck, Ralf et al. | 2011
- 1157
-
Laser 3D Machining with Variable Process ParametersWang, Xuyue / Wang, J. et al. | 2011
- 1163
-
Combination of Ultrasonic Vibration and Cryogenic Cooling for Cutting Performance Improvement of Inconel 718 TurningLin, S. Y. / Chung, C. T. / Cheng, Y. Y. et al. | 2011
- 1169
-
Effects of the roughness characteristics on the wire tool surface for the electrical discharge machining propertiesFukuzawa, Yasushi / Yamashita, Masahide / Mamuro, Hiroaki / Yamashita, Ken / Ogata, Masayoshi et al. | 2011
- 1175
-
Experimental Analysis of Work‐piece’s Diametrical Error in Ultrasonic‐Vibration‐Assisted TurningSoleimanimehr, H. / Nategh, M. J. / Gholamzadeh, B. et al. | 2011
- 1181
-
Experimental Study on Influence of Process Variables on Crater Dimensions in Micro‐ EDM of γ ‐Titanium AluminideMitra, S. / Paul, G. / Sarkar, S. / Nagahanumaiah et al. | 2011
- 1187
-
Friction Drilling of Stainless Steels PipesFernández, A. / Lopez de Lacalle, L. N. / Lamikiz, A. et al. | 2011
- 1193
-
Hot Cutting of Real‐Time Cast‐Forged GS Ductile Iron for Automotive RodsFouilland, Laurence / Mansori, Mohamed El et al. | 2011
- 1199
-
Investigation on the Surface Integrity and Tool Wear in Cryogenic MachiningDutra Xavier, Sandro E. / Delijaicov, Sergio / de Farias, Adalto / Filho, Marco Stipkovic / Batalha, Gilmar Ferreira et al. | 2011
- 1205
-
Optimization of wire Electrical Discharge turning operations using robust design of experimentMohammadi, Aminollah / Fadaei Tehrani, Alireza / Safari, Mahdi et al. | 2011
- 1211
-
Experimental Research on Ultrasonic Vibration Milling Metal Matrix Composites SiCp/AlGao, G. F. / Zhao, B. / Xiang, D. H. / Zhao, M. L. et al. | 2011
- 1216
-
Surface Characteristics of Titanium during ECM Process for Biomedical ApplicationsDhobe, Shirish D. / Doloi, B. / Bhattacharyya, B. et al. | 2011
- 1222
-
Surface Damage and Treatment by Impact of a Low Temperature Nitrogen JetLaribou, Hicham / Fressengeas, Claude / Entemeyer, Denis / Jeanclaude, Véronique / Tazibt, Abdel et al. | 2011
- 1228
-
The Influence of EDM Parameters in Finishing Stage on Surface Quality of Hot Work Steel Using Artificial Neural NetworkAmini, S. / Atefi, R. / Solhjoei, N. et al. | 2011
- 1237
-
Advanced Monitoring for Nanoimprint LithographyHocheng, H. / Hsu, W. H. et al. | 2011
- 1243
-
Characterization Of An EBL System: The Influence Of Process Parameters On Thickness Resist And Engraving ShapesD’Urso, G. / Longo, M. / Ravasio, C. / Maccarini, G. et al. | 2011
- 1249
-
Design and manufacture of a pick & place apparatus for manipulation of the SMD parts along with the glue head manipulation systemNosouhi, R. / Koupaei, M. Shams / Rabiei, M. S. et al. | 2011
- 1255
-
Study on ultra‐fine w‐EDM with on‐machine measurement‐assistedChen, Shun‐Tong / Yang, Hong‐Ye et al. | 2011
- 1261
-
Fabrication Of Micro‐Nozzles Via μ‐EDM ProcessModica, F. / Ferraris, E. / Trotta, G. / Fassi, I. / Reynaerts, D. et al. | 2011
- 1267
-
Instabilities in a Layer‐Multiplying DeviceSollogoub, Cyrille / Grandmontagne, Anne / Guinault, Alain et al. | 2011
- 1273
-
Micro Injection Moulding of Polymeric ComponentsTrotta, G. / Surace, R. / Modica, F. / Spina, R. / Fassi, I. et al. | 2011
- 1279
-
Micromanufacturing Of Hard To Machine Materials By Physical And Chemical Ablation ProcessesSchubert, A. / Edelmann, J. / Gross, S. / Zeidler, H. / Meichsner, G. / Hackert, M. / Wolf, N. / Schneider, J. et al. | 2011
- 1285
-
Miniaturization of the tube bulging testLu, Yanxia / Thibaud, Sébastien / Boudeau, Nathalie et al. | 2011
- 1291
-
Simulation of Nanoscale Orthogonal Cutting of Single‐Crystal SiliconLin, Zone‐Ching / Peng, Shih‐Shuan / Wang, Ren‐Yuan et al. | 2011
- 1297
-
Sol‐Gel Synthesis and Characterization of Nanocatalysts Doped with Co and CuEslami, Ali Alizadeh / Haghighi, Mohammad / Rahemi, Nader / Laheghi, Saeed Nasiri et al. | 2011
- 1305
-
Combined Plasma‐Arc Treatment And Surface Plastic Deformation Of Armco‐FeIvanov, Ivan / Dikova, Tsanka / Stavrev, Dimitar et al. | 2011
- 1311
-
Elaboration, characterization of CrN‐ based coatingsTlili, B. / Nouveau, C. / Guillemot, G. et al. | 2011
- 1317
-
Effect of Catalyst and Buffer Layer on Growth of Carbon Nanowalls by HFCVDEslami, Parvin Alizadeh / Laheghi, Saeed Nasiri / Ghoranneviss, Mahmood et al. | 2011
- 1323
-
Fabrication of Superhydrophobic Surface on Aluminum SubstrateXu, W. J. / Dou, Q. L. / Wang, X. Y. / Sun, J. / Wang, L. J. et al. | 2011
- 1329
-
Formation Of Chromium Nitride Layers Produced By MOPACVD Processes Under Glow Discharge ConditionsSobiecki, Jerzy Robert / Wierzchoń, Tadeusz et al. | 2011
- 1335
-
Friction Properties of Molybdenum Alloyed Steel at Elevated TemperaturesLi, Jianliang / Xiong, Dangsheng / Wu, Hongyan et al. | 2011
- 1341
-
Grinding Wear Behaviour of Stepped Austempered Ductile Iron as Media Material During Comminution of Iron Ore in Ball MillsRaghavendra, H. / Bhat, K. L. / Udupa, K. Rajendra / Hegde, M. M. Rajath et al. | 2011
- 1347
-
HVOF COATINGS OF DIAMALLOY 2002 AND DIAMALLOY 4010 ONTO STEEL: TENSILE AND BENDING RESPONSE OF COATINGSAl‐Shehri, Y. A. / Hashmi, M. S. J. / Yilbas, B. S. et al. | 2011
- 1353
-
Interferometric And Microscopic Measurements Of Surface Finish Appearance Evaluations Of Ophthalmic Lens EdgesGamble, M. / Mezghani, S. / El Mansori, M. / Divo, F. et al. | 2011
- 1359
-
INVESTIGATION ON SURFACE ROUGHNESS IN CYLINDRICAL GRINDINGRudrapati, Ramesh / Bandyopadhyay, Asish / Pal, Pradip Kumar et al. | 2011
- 1365
-
New Generation of MoSx Based Solid Lubricant Coatings: Recent Developments and ApplicationsHaider, Julfikar / Hashmi, M. S. J. et al. | 2011
- 1371
-
Designing Pulse Laser Surface Modification of H13 Steel Using Response Surface MethodAqida, S. N. / Brabazon, D. / Naher, S. et al. | 2011
- 1377
-
Oxynitrided Surface Layer Produced On Ti6Al4V Titanium Alloy Under Low Temperature Glow Discharge Conditions For Medical ApplicationsWierzchon, T. / Ossowski, M. / Borowski, T. / Morgiel, J. / Czarnowska, E. et al. | 2011
- 1383
-
ARC SPRAYING OF NANO‐STRUCTURED WIRE ON CARBON STEEL: EXAMINATION OF COATING MICROSTRUCTURESAl Askandarani, A. / Hashmi, M. S. J. / Yilbas, B. S. et al. | 2011
- 1389
-
Solid Particle Erosion Wear of GF/EP Composites with AddedBagci, Mehmet / Imrek, Huseyin et al. | 2011
- 1395
-
Surface Coating of Tungsten Carbide by Electric Exploding of ContactGrigoryev, Evgeny G. et al. | 2011
- 1400
-
TALC AS A SUBSTITUTE FOR DRY LUBRICANT (AN OVERVIEW)Abdulkareem, Suleiman / Orkuma, Gideon I. / Apasi, Adaokoma A. et al. | 2011
- 1407
-
A Model Based Approach to Increase the Part Accuracy in Robot Based Incremental Sheet Metal FormingMeier, Horst / Laurischkat, Roman / Zhu, Junhong et al. | 2011
- 1413
-
Application of genetic algorithm in integrated setup planning and operation sequencingKafashi, Sajad / Shakeri, Mohsen et al. | 2011
- 1419
-
Application of Particle Swarm Optimization in Computer Aided Setup PlanningKafashi, Sajad / Shakeri, Mohsen / Abedini, Vahid et al. | 2011
- 1425
-
Building A Simulation Model For The Prediction Of Temperature Distribution In Pulsed Laser Spot Welding Of Dissimilar Low Carbon Steel 1020 To Aluminum Alloy 6061Yousef, Adel K. M. / Taha, Ziad. A. / Shehab, Abeer A. et al. | 2011
- 1431
-
Computer Aided Setup Planning Using Tolerance Analysis for Prismatic ComponentsVahid, Abedini / Mohsen, Shakeri / Sajad, Kafashi et al. | 2011
- 1437
-
Development of a Crush and Mix Machine for Composite Brick FabricationSothea, Kruy / Fazli, Nik / Hamdi, M. / Aoyama, Hideki et al. | 2011
- 1443
-
Generation Of Manufacturing Routing And Operations Using Structured Knowledge As Basis To Application Of Computer Aided In Process PlanningOswaldo, Luiz Agostinho et al. | 2011
- 1449
-
Hybrid Simulation of Linked Structural System With Shear Friction DamperKim, Hyun‐soo / Choi, Jae‐hyouk et al. | 2011
- 1455
-
Identification of Friction Parameters from the Inverse Analysis of a Direct Extrusion TestGavrus, Adinel / Thien Pham, Duc / Francillette, Henri et al. | 2011
- 1461
-
Extrusion Process by Finite Volume Method Using OpenFoam SoftwareMartins, Marcelo Matos / Bressan, Jose Divo / Button, Sergio Tonini / Ivankovic, Alojz et al. | 2011
- 1467
-
Single Grit Grinding Simulation by Using Finite Element AnalysisÖpöz, Tahsin Tecelli / Chen, Xun et al. | 2011
- 1473
-
Modeling Of Microstructure Evolution Of BCC Metals Subjected To Severe Plastic DeformationSvyetlichnyy, Dmytro / Majta, Janusz / Muszka, Krzysztof / Łach, Łukasz et al. | 2011
- 1479
-
Modelling of Microstructure Changes in Hot Deformed Materials Using Cellular AutomataKuc, Dariusz / Gawąd, Jerzy et al. | 2011
- 1485
-
Springback Analysis of Draw‐Bending of 980 MPa Cold Rolled Steel Sheet and Its Experimental ValidationNoma, Nobuyasu / Kuwabara, Toshihiko et al. | 2011
- 1493
-
Behavior of Adsorption of onto Iron Powder During Dry GrindingHisyamudin Muhd Nor, Nik / Yokoyama, Seiji / Suzuki, Tatsuya et al. | 2011
- 1499
-
Dust Emission Induced By Friction Modifications At Tool Chip Interface In Dry Machining InKremer, Arnaud / El Mansori, Mohamed et al. | 2011
- 1505
-
Elaboration And Characterization Of Foam Glass Based On Cullet With Addition Of Soluble SilicatesAyadi, A. / Stiti, N. / Benhaoua, F. / Boumchedda, K. / Lerari, Y. et al. | 2011
- 1511
-
Evaluation of Complexity for Tolerancing Solutions of Mechanical Systems Using Pugh’s CriteriaNavas, Helena V. G. et al. | 2011
- 1515
-
Investigation of Environmental Impact of Downsized Five‐axis‐controlled Machine ToolOgawa, Sachiko / Hirogaki, Toshiki / Aoyama, Eiichi / Niiyama, Toru et al. | 2011
- 1521
-
Machinability of Austempered Ductile Iron (ADI) Produced by Integrated Green Technology of Continuous Casting‐Heat Treatment ProcessesMeena, A. / El Mansori, M. / Ghidossi, P. et al. | 2011
- 1527
-
Mechanical Separation of Metallic Copper from Polymer‐Insulated Copper WireYokoyama, Seiji / Takeuchi, Sakae / Hisyamudin Bin Muhd Nor, Nik et al. | 2011
- 1533
-
Novel Remanufacturing Process of Recycled Polytetrafluoroethylene(PTFE)/GF LaminateXi, Z. / Ghita, O. R. / Johnston, P. / Evans, K. E. et al. | 2011
- 1539
-
Recycling of Vineyard and Winery Wastes as Nutritive Composts for Edible Mushroom CultivationPetre, Marian / Teodorescu, Alexandru et al. | 2011
- 1545
-
Study Design And Realization Of Solar Water HeaterLounis, M. / Boudjemaa, F. / Akil, S. Kouider et al. | 2011
- 1553
-
Assessment and Optimization of Laser Cutting Process of PMMAEltawahni, H. A. / Olabi, A. G. / Benyounis, K. Y. et al. | 2011
- 1559
-
A Statistical Study for Optimum Surface Roughness and Engraving DepthKasman, Şefika / Saklakoğlu, İ. Etem et al. | 2011
- 1565
-
Characterisations Of Wt Deposition On Mild Steel Via Plasma Spray MethodYusoff, N. H. / Ghazali, M. J. / Isa, M. C. / Daud, A. R. / Muchtar, A. / Forghani, S. et al. | 2011
- 1570
-
Design and Manufacture of Laser Tool for Measurement of Turbine BladeNooraniazad, M. / Daneshi, A. / Fakhri, M. et al. | 2011
- 1576
-
Influence Of The Laser Cladding Strategies On The Mechanical Properties Of Inconel 718Lamikiz, A. / Tabernero, I. / Ukar, E. / López de Lacalle, L. N. / Delgado, J. et al. | 2011
- 1582
-
Investigation of Laser Deep Engraving Process: A Case Study for Surface Roughness and Engraving DepthKasman, Şefika / Saklakoğlu, İ. Etem et al. | 2011
- 1588
-
Laser Cleaning of Fine Particles on Si‐WafersWang, X. Y. / Kang, R. K. / Xu, W. J. / Guo, D. M. / Wang, J. et al. | 2011
- 1594
-
Laser Hardening Prediction Tool Based On a Solid State Transformations Numerical ModelMartínez, S. / Ukar, E. / Lamikiz, A. / Liebana, F. et al. | 2011
- 1600
-
Optimization of Nd: YAG Laser Marking of Alumina Ceramic Using RSM And ANNPeter, Josephine / Doloi, B. / Bhattacharyya, B. et al. | 2011
- 1606
-
Precision Control Module For UV Laser 3D MicromachiningWu, Wen‐Hong / Hung, Min‐Wei / Chang, Chun‐Li et al. | 2011
- 1612
-
The Mixed Processing Models Development Of Thermal Fracture And Laser Ablation On Glass SubstrateHuang, Kuo‐Cheng / Wu, Wen‐Hong / Tseng, Shih‐Feng / Hwang, Chi‐Hung et al. | 2011
- 1621
-
ANALYTICAL MODEL FOR CHIP FORMATION IN CASE OF ORTHOGONAL MACHINING PROCESSSalvatore, Ferdinando / Mabrouki, Tarek / Hamdi, Hédi et al. | 2011
- 1627
-
An Investigation of Machining Characteristics in Micro‐scale Milling ProcessKu, Min‐Su / Kang, Ik‐Soo / Kim, Jeong‐Suk et al. | 2011
- 1633
-
A Numerical Approach and Comparison of Cutting Forces and Chip Morphology in Orthogonal Cutting of Light AlloysÁlvarez, Roberto / Domingo, Rosario / Sebastián, Miguel Ángel et al. | 2011
- 1639
-
Modeling and Adhesive Tool Wear in Dry Drilling of Aluminum AlloysGirot, F. / Gutiérrez‐Orrantia, M. E. / Calamaz, M. / Coupard, D. et al. | 2011
- 1645
-
Modeling and Tool Wear in Routing of CFRPIliescu, D. / Fernandez, A. / Gutiérrez‐Orrantia, M. E. / Lopez de Lacalle, L. N. / Girot, F. et al. | 2011
- 1651
-
Modelling of Superplastic Forming of AZ31 Magnesium AlloyGiuliano, G. et al. | 2011
- 1657
-
Contribution of shot peening on carburized or carbonitrided partsRenaud, P. / Bristiel, P. / Barrallier, L. / Desvignes, M. / Kubler, R. et al. | 2011
- 1663
-
Effect of coating materials on thermal loading in machining difficult‐to‐cut materialsKone, F. / Czarnota, C. / Haddag, B. / Lazard, M. / Nouari, M. et al. | 2011
- 1669
-
Prediction Of Abrasive And Diffusive Tool Wear Mechanisms In MachiningRizzuti, S. / Umbrello, D. et al. | 2011
- 1675
-
Representative simulations of the shot peening processKubler, R. / Desvignes, M. / Fabre, A. et al. | 2011
- 1683
-
Towards a Superplastic Forming of Fe‐Mn‐Al AlloysGuanabara, Paulo / Bueno, Levi de O. / Batalha, Gilmar Ferreira et al. | 2011
-
Front Matter for Volume 1315| 2011
-
Back Matter for Volume 1315| 2011