Experimental investigations on microstructure and formability of cryorolled AA 5052 sheets (English)
- New search for: Chandra Sekhar, K.
- New search for: Narayanasamy, R.
- New search for: Velmanirajan, K.
- New search for: Chandra Sekhar, K.
- New search for: Narayanasamy, R.
- New search for: Velmanirajan, K.
-
ISSN:
- Article (Journal) / Electronic Resource
-
Title:Experimental investigations on microstructure and formability of cryorolled AA 5052 sheets
-
Contributors:
-
Publisher:
- New search for: Elsevier Ltd
-
Publication date:2013-08-02
-
Size:7 pages
-
ISSN:
-
DOI:
-
Type of media:Article (Journal)
-
Type of material:Electronic Resource
-
Language:English
-
Source:
Table of contents – Volume 53
The tables of contents are generated automatically and are based on the data records of the individual contributions available in the index of the TIB portal. The display of the Tables of Contents may therefore be incomplete.
- 1
-
Fabrication of NiCr alloy parts by selective laser melting: Columnar microstructure and anisotropic mechanical behaviorSong, Bo / Dong, Shujuan / Coddet, Pierre / Liao, Hanlin / Coddet, Christian et al. | 2013
- 8
-
Novel @b-type Zr-Mo-Ti alloys for biological hard tissue replacementsNie, L. / Zhan, Y. / Liu, H. / Tang, C. et al. | 2014
- 8
-
Novel β-type Zr–Mo–Ti alloys for biological hard tissue replacementsNie, Li / Zhan, Yongzhong / Liu, Hao / Tang, Chenghuang et al. | 2013
- 13
-
Evaluation of microstructure and mechanical properties of Al/Al2O3/SiC hybrid composite fabricated by accumulative roll bonding processAhmadi, Azin / Toroghinejad, Mohammad Reza / Najafizadeh, Abbas et al. | 2013
- 20
-
Open-cell cavity-integrated injection-molded acoustic polypropylene foamsJahani, D. / Ameli, A. / Jung, P.U. / Barzegari, M.R. / Park, C.B. / Naguib, H. et al. | 2013
- 29
-
Mechanical, sorption and adhesive properties of composites based on low density polyethylene filled with date palm wood powderAlMaadeed, Mariam A. / Nógellová, Zuzana / Mičušík, Matej / Novák, Igor / Krupa, Igor et al. | 2013
- 38
-
Influence of hot pressing temperature on the microstructure and mechanical properties of 75% Cu–25% Sn alloyHan, Ping / Xiao, Fu-ren / Zou, Wen-jun / Liao, Bo et al. | 2013
- 43
-
A new resource-saving, low chromium and low nickel duplex stainless steel 15Cr–xAl–2Ni–yMnWan, Jianquan / Ran, Qingxuan / Li, Jun / Xu, Yulai / Xiao, Xueshan / Yu, Haifeng / Jiang, Laizhu et al. | 2013
- 51
-
Influence of bolt configuration and TiO2/ZnS fillers content on the strength of composites fastenersArun, K.V. / Sujay Kumar, D. / Murugesh, M.C. et al. | 2013
- 58
-
Corrosion fatigue behaviors of steel wires used in coalmineWang, Songquan / Zhang, Dekun / Chen, Kai / Xu, Linmin / Ge, Shirong et al. | 2013
- 65
-
Experimental study of the thermal and wear properties of recycled polyethylene/breadfruit seed hull ash particulate compositesAtuanya, C.U. / Aigbodion, V.S. / Nwigbo, S.C. et al. | 2013
- 74
-
Enhanced thermal transfer and bending strength of SiC/Al composite with controlled interfacial reactionXue, C. / Yu, J.K. et al. | 2013
- 79
-
Hot deformation behavior of spray-deposited Al–Zn–Mg–Cu alloyJia, Yandong / Cao, Fuyang / Guo, Shu / Ma, Pan / Liu, Jingshun / Sun, Jianfei et al. | 2013
- 86
-
A study on low magnetic permeability gas tungsten arc weldment of AISI 316LN stainless steel for application in electron acceleratorKumar, Abhay / Soni, R.K. / Ganesh, P. / Kaul, Rakesh / Bhatnagar, V.K. / Dwivedi, Jishnu / Kukreja, L.M. et al. | 2013
- 93
-
Interlaminar shear strength of SiC matrix composites reinforced by continuous fibers at 900°C in airZhang, Chengyu / Gou, Jianjie / Qiao, Shengru / Wang, Xuanwei / zhang, Jun et al. | 2013
- 93
-
Interlaminar shear strength of SiC matrix composites reinforced by continuous fibers at 900^oC in airZhang, C. / Gou, J. / Qiao, S. / Wang, X. / zhang, J. et al. | 2014
- 99
-
Effects of ferrite volume fraction on the tensile deformation characteristics of dual phase twinning induced plasticity steelImandoust, A. / Zarei-Hanzaki, A. / Heshmati-Manesh, S. / Moemeni, S. / Changizian, P. et al. | 2013
- 106
-
Influences of joint geometry on defects and mechanical properties of friction stir welded AA6061-T4 T-jointsHou, Xiaopeng / Yang, Xinqi / Cui, Lei / Zhou, Guang et al. | 2013
- 118
-
Influence of Al7Cu2Fe intermetallic particles on the localized corrosion of high strength aluminum alloysChemin, Aline / Marques, Denys / Bisanha, Leandro / Motheo, Artur de Jesus / Bose Filho, Waldek Wladimir / Ruchert, Cassius Olivio Figueiredo et al. | 2013
- 124
-
Effect of weld curvature radius and tool rotation direction on joint microstructure in friction stir welding casting alloysLi, Wenya / Yang, Qian / Zhang, Zhihan / Gao, Dalu et al. | 2013
- 129
-
Effect of surface roughness on tribological properties of TiB2/Al compositesTian, S.F. / Jiang, L.T. / Guo, Q. / Wu, G.H. et al. | 2013
- 137
-
Effect of thermo-mechanical treatment on properties improvement and microstructure changes in copper–gold alloyMarković, Ivana / Nestorović, Svetlana / Marković, Desimir et al. | 2013
- 145
-
Glass forming ability, thermodynamics and mechanical properties of novel Ti–Cu–Ni–Zr–Hf bulk metallic glassesLi, Peiyou / Wang, Gang / Ding, Ding / Shen, Jun et al. | 2013
- 152
-
Low-velocity impact response of woven Kevlar/epoxy laminated composites reinforced with multi-walled carbon nanotubes at ambient and low temperaturesTaraghi, Iman / Fereidoon, Abdolhossein / Taheri-Behrooz, Fathollah et al. | 2013
- 159
-
Multi-objective design optimization of functionally graded material for the femoral component of a total knee replacementBahraminasab, Marjan / Sahari, B.B. / Edwards, K.L. / Farahmand, Farzam / Hong, Tang Sai / Arumugam, Manohar / Jahan, Ali et al. | 2013
- 174
-
The effects of oxide film and annealing treatment on the bond strength of Al–Cu strips in cold roll bonding processYousefi Mehr, Vahid / Toroghinejad, Mohammad Reza / Rezaeian, Ahmad et al. | 2013
- 182
-
Influence of microstructure on nano-mechanical properties of single planar solid oxide fuel cell in pre- and post-reduced conditionsDey, Tapobrata / Dey, Arjun / Ghosh, Prakash C. / Bose, Manaswita / Mukhopadhyay, Anoop K. / Basu, Rajendra N. et al. | 2013
- 192
-
Microstructures and properties of titanium–copper lap welded joints by cold metal transfer technologyCao, R. / Feng, Z. / Chen, J.H. et al. | 2013
- 202
-
Low energy implantation to inhibit wear in N+ ions implanted WC–Co compositeBelbah, Ahmed / Mkaddem, Ali / Ladaci, Naouri / Mebarki, Nadia / El Mansori, Mohamed et al. | 2013
- 209
-
Reduction of thermal residual stresses of laminated polymer composites by addition of carbon nanotubesShokrieh, M.M. / Daneshvar, A. / Akbari, S. et al. | 2013
- 217
-
A novel approach to develop aluminum matrix nano-composite employing friction stir welding techniqueBahrami, Mohsen / Dehghani, Kamran / Besharati Givi, Mohammad Kazem et al. | 2013
- 226
-
Prediction and optimization of friction welding parameters for super duplex stainless steel (UNS S32760) jointsUdayakumar, T. / Raja, K. / Afsal Husain, T.M. / Sathiya, P. et al. | 2013
- 236
-
Effect of corrosion on the fatigue life and fracture mechanisms of 6101 aluminum alloy wires for car manufacturing applicationsLaurino, A. / Andrieu, E. / Harouard, J.-P. / Odemer, G. / Salabura, J.-C. / Blanc, C. et al. | 2013
- 250
-
Experimental and theoretical study of the lateral compression process on the empty and foam-filled hexagonal columnsNiknejad, Abbas / Rahmani, Danesh M. et al. | 2013
- 262
-
Effect of annealing treatment on the microstructure and mechanical properties of ultrafine-grained aluminumZhao, F.X. / Xu, X.C. / Liu, H.Q. / Wang, Y.L. et al. | 2013
- 269
-
Influence of curing conditions on properties of high calcium fly ash geopolymer containing Portland cement as additivePangdaeng, Saengsuree / Phoo-ngernkham, Tanakorn / Sata, Vanchai / Chindaprasirt, Prinya et al. | 2013
- 275
-
Microstructure and mechanical properties of transient liquid phase bonding of /Al nanocomposite using copper interlayerSayyedain, S.S. / Salimijazi, H.R. / Toroghinejad, M.R. / Karimzadeh, F. et al. | 2013
- 283
-
Mechanical and bio-corrosion properties of quaternary Mg–Ca–Mn–Zn alloys compared with binary Mg–Ca alloysBakhsheshi-Rad, H.R. / Idris, M.H. / Abdul-Kadir, M.R. / Ourdjini, A. / Medraj, M. / Daroonparvar, M. / Hamzah, E. et al. | 2013
- 293
-
Analyses on the dynamic strength of honeycombs under the y-directional crushingHu, Lingling / You, Fanfan / Yu, Tongxi et al. | 2013
- 302
-
Joining of Nylon 6 plate by friction stir welding process using threaded pin profilePanneerselvam, K. / Lenin, K. et al. | 2013
- 308
-
Investigation of the effect of Al-8B master alloy and strain-induced melt activation process on dry sliding wear behavior of an Al–Zn–Mg–Cu alloyMirjavadi, Seyed Sajad / Alipour, Mohammad / Hamouda, A.M.S. / Besharati Givi, M.K. / Emamy, M. et al. | 2013
- 317
-
Evaluation of permanent deformation characteristics of unmodified and Polyethylene Terephthalate modified asphalt mixtures using dynamic creep testBaghaee Moghaddam, Taher / Soltani, Mehrtash / Karim, Mohamed Rehan et al. | 2013
- 325
-
Flexural strength of palm oil clinker concrete beamsMohammed, Bashar S. / Foo, W.L. / Abdullahi, M. et al. | 2013
- 332
-
Cooling process and mechanical properties design of hot-rolled low carbon high strength microalloyed steel for automotive wheel usageHu, Jun / Du, Lin-Xiu / Wang, Jian-Jun / Sun, Qing-Yi et al. | 2013
- 338
-
Investigation on the effect of friction stir processing on the superplastic forming of AZ31B alloyRamesh Babu, S. / Senthil Kumar, V.S. / Karunamoorthy, L. / Madhusudhan Reddy, G. et al. | 2013
- 349
-
Hot tensile deformation behaviors and constitutive model of 42CrMo steelHuang, Yuan-Chun / Lin, Y.C. / Deng, Jiao / Liu, Ge / Chen, Ming-Song et al. | 2013
- 357
-
Dynamic recrystallization behavior and hot workability of Mg–2.0Zn–0.3Zr–0.9Y alloy by using hot compression testLv, Bin-Jiang / Peng, Jian / Wang, Yong-Jian / An, Xiao-Qin / Zhong, Li-Ping / Tang, Ai-Tao / Pan, Fu-Sheng et al. | 2013
- 366
-
Effect of gate size on the melt filling behavior and residual stress of injection molded partsXie, Pengcheng / Guo, Fengxia / Jiao, Zhiwei / Ding, Yumei / Yang, Weimin et al. | 2013
- 373
-
Wear properties of high pressure torsion processed ultrafine grained Al–7%Si alloyAal, Mohamed Ibrahim Abd El / Kim, Hyoung Seop et al. | 2013
- 383
-
Reliability of mechanical properties of induction sintered iron based powder metal partsÇivi, Can / Tahralı, Necati / Atik, Enver et al. | 2013
- 398
-
Hot workability in process modeling of a bearing steel by using combined constitutive equations and dynamic material modelEl Mehtedi, M. / Gabrielli, F. / Spigarelli, S. et al. | 2013
- 405
-
Microstructures and mechanical properties of welded joints of novel 3Cr pipeline steel using an inhouse and two commercial welding wiresZhu, Jinyang / Xu, Lining / Chang, Wei / Hu, Lihua / Lu, Minxu et al. | 2013
- 412
-
Influence of grain size on wear behavior of SiC coating for carbon/carbon composites at elevated temperaturesChen, Zishan / Li, Hejun / Li, Kezhi / Shen, Qingliang / Fu, Qiangang et al. | 2013
- 419
-
The utilization of bamboo charcoal enhances wood plastic composites with excellent mechanical and thermal propertiesLi, Xiang / Lei, Bingrong / Lin, Zhidan / Huang, Langhuan / Tan, Shaozao / Cai, Xiang et al. | 2013
- 425
-
Valorization of waste oil palm (Elaeis guineensis Jacq.) biomass through furfurylationSzymona, Karolina / Borysiuk, Piotr / H’ng, Paik San / Chin, Kit Ling / Mamiński, Mariusz et al. | 2013
- 430
-
Effect of Sr on microstructure, tensile properties and wear behavior of as-cast Mg–6Zn–4Si alloyCong, Mengqi / Li, Ziquan / Liu, Jinsong / Li, Shaohua et al. | 2013
- 435
-
Effect of tantalum content on the microstructure and mechanical behavior of cermets based on (TixTa1− x)(C0.5N0.5) solid solutionsChicardi, E. / Torres, Y. / Córdoba, J.M. / Hvizdoš, P. / Gotor, F.J. et al. | 2013
- 445
-
AZ91C magnesium alloy modified by CdShabadi, R. / Ambat, R. / Dwarakadasa, E.S. et al. | 2013
- 452
-
High temperature mechanical properties and surface fatigue behavior improving of steel alloy via laser shock peeningRen, N.F. / Yang, H.M. / Yuan, S.Q. / Wang, Y. / Tang, S.X. / Zheng, L.M. / Ren, X.D. / Dai, F.Z. et al. | 2013
- 457
-
Parameter determination and experimental verification of Bergström–Boyce hysteresis model for rubber compounds reinforced by carbon black blendsGhoreishy, M.H.R. / Firouzbakht, M. / Naderi, G. et al. | 2013
- 457
-
Parameter determination and experimental verification of Bergstrom-Boyce hysteresis model for rubber compounds reinforced by carbon black blendsGhoreishy, M. H. R. / Firouzbakht, M. / Naderi, G. et al. | 2014
- 466
-
Diazonium functionalization of graphene nanosheets and impact response of aniline modified graphene/bismaleimide nanocompositesLiu, Muchun / Duan, Yuexin / Wang, Yan / Zhao, Yan et al. | 2013
- 475
-
Microstructural evolution in ultrasonically processed in situ AZ91 matrix composites and their mechanical and wear behaviorMuley, Sachin Vijay / Singh, Satya Prakash / Sinha, Piyush / Bhingole, P.P. / Chaudhari, G.P. et al. | 2013
- 482
-
High temperature mechanical properties of low alloy steel foams produced by powder metallurgyBekoz, Nuray / Oktay, Enver et al. | 2013
- 490
-
Research on fatigue behavior of welded joint spraying fused by low transformation temperature alloy powderZhao, Xiaohui / Wang, Dongpo / Deng, Caiyan et al. | 2013
- 497
-
Fracture of elastomers by cavitationHamdi, Adel / Guessasma, Sofiane / Naït Abdelaziz, M. et al. | 2013
- 504
-
Microstructures and mechanical property of laser butt welding of titanium alloy to stainless steelChen, Shuhai / Zhang, Mingxin / Huang, Jihua / Cui, Chengji / Zhang, Hua / Zhao, Xingke et al. | 2013
- 512
-
Microstructure and mechanical properties of aluminum alloy matrix composites reinforced with Fe-based metallic glass particlesZheng, Ruixiao / Yang, Han / Liu, Tong / Ameyama, Kei / Ma, Chaoli et al. | 2013
- 519
-
On the role of pin geometry in microstructure and mechanical properties of AA7075/SiC nano-composite fabricated by friction stir welding techniqueBahrami, Mohsen / Besharati Givi, Mohammad Kazem / Dehghani, Kamran / Parvin, Nader et al. | 2013
- 528
-
Influences of solid solution parameters on the microstrucuture and hardness of Mg–9Li–6Al and Mg–9Li–6Al–2YGuo, Xuying / Wu, Ruizhi / Zhang, Jinghuai / Liu, Bin / Zhang, Milin et al. | 2013
- 534
-
Hot shear deformation constitutive analysis and processing map of extruded Mg–12Li–1Zn bcc alloyKarami, M. / Mahmudi, R. et al. | 2013
- 540
-
Influence of thermal conditions on the tensile properties of basalt fiber reinforced polypropylene–clay nanocompositesEslami-Farsani, Reza / Reza Khalili, S. Mohammad / Hedayatnasab, Ziba / Soleimani, Neda et al. | 2013
- 550
-
Microstructure and mechanical properties of multi-pass friction stir processed aluminum alloy 6063Al-Fadhalah, Khaled J. / Almazrouee, Abdulla I. / Aloraier, Abdulkareem S. et al. | 2013
- 561
-
Fabrication and technological properties of nanoporous spinel/forsterite/zirconia ceramic compositesWahsh, M.M.S. / Khattab, R.M. / Khalil, N.M. / Gouraud, F. / Huger, M. / Chotard, T. et al. | 2013
- 568
-
Optimization of deep penetration laser welding of thick stainless steel with a 10kW fiber laserZhang, Mingjun / Chen, Genyu / Zhou, Yu / Liao, Shenghui et al. | 2013
- 577
-
Investigation of mechanical properties of borided Nickel 201 alloyGunes, Ibrahim / Kayali, Yusuf et al. | 2013
- 581
-
Microstructure evolution and flow behavior of hot-rolled aluminum – 5% B4C compositeGangolu, S. / Rao, A.G. / Prabhu, N. / Deshmukh, V.P. / Kashyap, B.P. et al. | 2013
- 588
-
Adhesive and cohesive properties of glue cement mortars with addition of organic–mineral modifiersDvorkin, L. / Dvorkin, O. / Garnitsky, Y. / Ribakov, Y. et al. | 2013
- 596
-
Study on preparation and mechanical property of nanocrystalline NiAl intermetallicLiu, Eryong / Jia, Junhong / Bai, Yaping / Wang, Wenzhen / Gao, Yimin et al. | 2013
- 602
-
Microstructures and mechanical properties of a hot extruded Mg–4.45Zn–0.46Y–0.76Zr alloy plateJi, Dawei / Liu, Chuming / Tang, Liechong / Wan, Yingchun / Huang, Cen et al. | 2013
- 611
-
An experimental investigation of in-plane constraint effect on local fracture resistance of a dissimilar metal welded jointYang, J. / Wang, G.Z. / Xuan, F.Z. / Tu, S.T. / Liu, C.J. et al. | 2013
- 620
-
Tribological performance of TiAl matrix self-lubricating composites containing Ag, Ti3SiC2 and BaF2/CaF2 tested from room temperature to 600°CShi, Xiaoliang / Yao, Jie / Xu, Zengshi / Zhai, Wenzheng / Song, Siyuan / Wang, Mang / Zhang, Qiaoxin et al. | 2013
- 620
-
Tribological performance of TiAl matrix self-lubricating composites containing Ag, Ti"3SiC"2 and BaF"2/CaF"2 tested from room temperature to 600^oCShi, X. / Yao, J. / Xu, Z. / Zhai, W. / Song, S. / Wang, M. / Zhang, Q. et al. | 2014
- 634
-
Effect of Si content on microstructure and mechanical properties of Al–Si–Mg alloysWang, Yongjin / Liao, Hengcheng / Wu, Yuna / Yang, Jian et al. | 2013
- 639
-
Fatigue lifetime of AZ91 magnesium alloy subjected to cyclic thermal and mechanical loadingsAzadi, Mohammad / Farrahi, Gholam Hossein / Winter, Gerhard / Eichlseder, Wilfred et al. | 2013
- 645
-
Experimental investigations on welding behaviour of sintered and forged Fe–0.3%C–3%Mo low alloy steelChandramouli, R. / Kandavel, T.K. / Karthikeyan, P. et al. | 2013
- 651
-
Optimisation of accelerators and vulcanising systems on thermal stability of natural rubber/recycled ethylene–propylene–diene-monomer blendsNabil, H. / Ismail, H. / Azura, A.R. et al. | 2013
- 662
-
Hot deformation and optimization of process parameters of an as-cast 6Mo superaustenitic stainless steel: A study with processing mapLiu, Guiwu / Han, Ying / Shi, Zhongqi / Sun, Jiapeng / Zou, Dening / Qiao, Guanjun et al. | 2013
- 673
-
Superior toughness obtained via tuning the compatibility of poly(ethylene terephthalate)/poly(ethylene–octene) blendsSu, Juan-juan / Peng, Fang / Gao, Xiang / Yang, Guang-hui / Fu, Qiang / Wang, Ke et al. | 2013
- 681
-
The effects of manufacturing parameters on geometrical and mechanical properties of copper foams produced by space holder techniqueParvanian, A.M. / Saadatfar, M. / Panjepour, M. / Kingston, A. / Sheppard, A.P. et al. | 2013
- 691
-
Mix design method for self compacting metakaolin concrete with different properties of coarse aggregateKhaleel, O.R. / Abdul Razak, H. et al. | 2013
- 701
-
Tailoring the structure and properties of jute blended nonwoven geotextiles via alkali treatment of jute fibersRawal, Amit / Sayeed, M.M.A. et al. | 2013
- 706
-
Low-velocity impact damage of woven fabric composites: Finite element simulation and experimental verificationHassan, M.A. / Naderi, S. / Bushroa, A.R. et al. | 2013
- 719
-
The effect of impact velocity and target thickness on ballistic performance of layered plates using Taguchi methodBobbili, Ravindranadh / Paman, Ashish / Madhu, V. / Gogia, A.K. et al. | 2013
- 727
-
Effect of groove design on mechanical and metallurgical properties of quenched and tempered low alloy abrasion resistant steel welded jointsSharma, Varun / Shahi, A.S. et al. | 2013
- 737
-
Deformation behavior of a Ti-based bulk metallic glass composite with excellent cryogenic mechanical propertiesLi, Jinshan / Bai, Jie / Wang, Jun / Kou, Hongchao / Hu, Rui / Fu, Hengzhi et al. | 2013
- 741
-
Fracture study of the composite using essential work of fracture method: PP–SEBS–g–MA/E1 clayNekhlaoui, S. / Essabir, H. / Bensalah, M.O. / Fassi-Fehri, O. / Qaiss, A. / Bouhfid, R. et al. | 2013
- 749
-
Workability characteristics and mechanical behavior modeling of severely deformed pure titanium at high temperaturesSajadifar, Seyed Vahid / Yapici, Guney Guven et al. | 2013
- 758
-
The Cu matrix cermets remarkably strengthened by TiB2 “in situ” synthesized via self-propagating high temperature synthesisZiemnicka-Sylwester, Marta et al. | 2013
- 766
-
Study on the microstructure and mechanical properties of diffusion brazing joint of C17200 Copper Beryllium alloyEsmati, K. / Omidvar, H. / Jelokhani, J. / Naderi, M. et al. | 2013
- 774
-
Effect of hot extrusion on wear properties of Al–15wt.% Mg2Si in situ metal matrix compositesSoltani, N. / Jafari Nodooshan, H.R. / Bahrami, A. / Pech-Canul, M.I. / Liu, Wencai / Wu, Gouhua et al. | 2013
- 782
-
Functional and perceptive aspects of non-stick coatings for cookwareRossi, Stefano / Gai, Gianpietro / De Benedetto, Roberto et al. | 2013
- 791
-
Effects of high-temperature annealing on the microstructure and properties of C/SiC–ZrB2 compositesChen, Si’an / Hu, Haifeng / Zhang, Yudi / Zhang, Changrui / Wang, Qikun et al. | 2013
- 797
-
Thinning and spring back prediction of sheet metal in the deep drawing processZein, H. / El Sherbiny, M. / Abd-Rabou, M. / El shazly, M. et al. | 2013
- 809
-
Variation of Young’s modulus of high-strength TA18 tubes and its effects on forming quality of tubes by numerical control bendingZhan, M. / Huang, T. / Zhang, P.P. / Yang, H. et al. | 2013
- 816
-
Microstructure evolution and shear strength of vacuum brazed joint for super-Ni/NiCr laminated composite with Ni–Cr–Si–B amorphous interlayerWu, Na / Li, Yajiang / Ma, Qunshuang et al. | 2013
- 822
-
Study on the mechanical behaviors of grey iron mould by simulation and experimentLan, Peng / Zhang, Jiaquan et al. | 2013
- 830
-
Strain rate dependent constitutive model for predicting the material behaviour of polyurea under high strain rate tensile loadingMohotti, Damith / Ali, Muneeb / Ngo, Tuan / Lu, Jinghan / Mendis, Priyan et al. | 2013
- 838
-
Dissimilar friction stir welding of Ti–6Al–4V alloy and aluminum alloy employing a modified butt joint configuration: Influences of process variables on the weld interfaces and tensile propertiesLi, Bo / Zhang, Zhenhua / Shen, Yifu / Hu, Weiye / Luo, Lei et al. | 2013
- 849
-
Development of novel Mg–Ni60Nb40 amorphous particle reinforced composites with enhanced hardness and compressive responseJayalakshmi, S. / Sahu, Shreyasi / Sankaranarayanan, S. / Gupta, Sujasha / Gupta, M. et al. | 2013
- 856
-
Cure and mechanical properties and abrasive wear behavior of natural rubber, styrene–butadiene rubber and their blends reinforced with silica hybrid fillersTangudom, Paveena / Thongsang, Sirinthorn / Sombatsompop, Narongrit et al. | 2013
- 865
-
Flow stress behavior of AZ61 magnesium alloy during hot compression deformationTsao, L.C. / Huang, Yen-Teng / Fan, Kuo-Huan et al. | 2013
- 870
-
Microstructural morphology effects on fracture resistance and crack tip strain distribution in Ti–6Al–4V alloy for orthopedic implantsCvijović-Alagić, I. / Gubeljak, N. / Rakin, M. / Cvijović, Z. / Gerić, K. et al. | 2013
- 881
-
Friction and wear properties of stainless steel sliding against polyetheretherketone and carbon-fiber-reinforced polyetheretherketone under natural seawater lubricationWang, Zhiqiang / Gao, Dianrong et al. | 2013
- 888
-
Effects of Mo, Cr and Nb on microstructure and mechanical properties of heat affected zone for Nb-bearing X80 pipeline steelsChen, Xiao-wei / Qiao, Gui-ying / Han, Xiu-lin / Wang, Xu / Xiao, Fu-ren / Liao, Bo et al. | 2013
- 902
-
Development of a detailed aircraft tyre finite element model for safety assessmentGuo, H. / Bastien, C. / Blundell, M. / Wood, G. et al. | 2013
- 910
-
Characterization of dynamic recrystallization parameters for a low carbon resulfurized free-cutting steelNaghdy, S. / Akbarzadeh, A. et al. | 2013
- 915
-
Dissimilar pulsed Nd:YAG laser welding of pure niobium to Ti–6Al–4VTorkamany, M.J. / Malek Ghaini, F. / Poursalehi, R. et al. | 2013
- 921
-
Analysis of interlaminar fracture toughness and damage mechanisms in composite laminates reinforced with sprayed multi-walled carbon nanotubesAlmuhammadi, Khaled / Alfano, Marco / Yang, Yang / Lubineau, Gilles et al. | 2013
- 928
-
Investigation on interfacial adhesion of date palm/epoxy using fragmentation techniqueShalwan, A. / Yousif, B.F. et al. | 2013
- 938
-
Relationship between tensile and impact properties in Al–Si–Cu–Mg cast alloys and their fracture mechanismsSamuel, A.M. / Doty, H.W. / Valtierra, S. / Samuel, F.H. et al. | 2013
- 947
-
Forming limits of Mg alloy ZEK100 sheet in preform annealing processMin, Junying / Lin, Jianping / Li, Jingjing et al. | 2013
- 954
-
Effect of post-weld heat treatments on microstructure and mechanical properties of friction welded alloy 718 jointsDamodaram, R. / Ganesh Sundara Raman, S. / Prasad Rao, K. et al. | 2013
- 962
-
A novel method for improving fatigue life of friction stir spot welded joints using localized plasticityHassanifard, Soran / Mohammadpour, Masoud / Rashid, Hossein Ahmadi et al. | 2013
- 972
-
Behavior of reinforced concrete beams strengthened with externally bonded hybrid fiber reinforced polymer systemsHawileh, Rami A. / Rasheed, Hayder A. / Abdalla, Jamal A. / Al-Tamimi, Adil K. et al. | 2013
- 983
-
Freeze–thaw resistance, mechanical and transport properties of self-consolidating concrete incorporating coarse recycled concrete aggregateTuyan, Murat / Mardani-Aghabaglou, Ali / Ramyar, Kambiz et al. | 2013
- 992
-
Low-cycle fatigue behavior of extruded Mg–10Gd–2Y–0.5Zr alloysZhu, Rong / Cai, Xiaotian / Wu, Yanjun / Liu, Lingli / Ji, Wenqing / Hua, Bo et al. | 2013
- 998
-
Process design and prediction of mechanical properties of dual phase steels with prepositional ultra fast coolingCai, Xiaohui / Liu, Chengbao / Liu, Zhenyu et al. | 2013
- 1005
-
A comprehensive overview about the influence of different admixtures and additives on the properties of alkali-activated fly ashRashad, Alaa M. et al. | 2013
- 1026
-
A microscopic investigation of failure mechanisms in a triaxially braided polyimide composite at room and elevated temperaturesMontesano, John / Fawaz, Zouheir / Poon, Cheung / Behdinan, Kamran et al. | 2013
- 1037
-
Effect of α–α′ phase separation on notch impact behavior of oxide dispersion strengthened (ODS) Fe20Cr5Al alloyChao, J. / Capdevila, C. / Serrano, M. / Garcia-Junceda, A. / Jimenez, J.A. / Miller, M.K. et al. | 2013
- 1037
-
Effect of @a-@a' phase separation on notch impact behavior of oxide dispersion strengthened (ODS) Fe20Cr5Al alloyChao, J. / Capdevila, C. / Serrano, M. / Garcia-Junceda, A. / Jimenez, J. A. / Miller, M. K. et al. | 2014
- 1047
-
Investigation of microstructural and mechanical properties of austempered steel bar-reinforced ductile cast iron compositeKazemi, M. / Kiani-Rashid, A.R. / Nourian, A. / Babakhani, A. et al. | 2013
- 1052
-
Numerical analysis and experimental investigation of welding residual stresses and distortions in a T-joint fillet weldPerić, Mato / Tonković, Zdenko / Rodić, Alan / Surjak, Martin / Garašić, Ivica / Boras, Ivanka / Švaić, Srećko et al. | 2013
- 1064
-
Experimental investigations on microstructure and formability of cryorolled AA 5052 sheetsChandra Sekhar, K. / Narayanasamy, R. / Velmanirajan, K. et al. | 2013
- 1071
-
Theoretical simulation and experimental verification of C/SiC joints with pins or boltsLi, Guangde / Wu, Xinfeng / Zhang, Changrui / Hu, Haifeng / Zhang, Yudi / Zhang, Zhibin et al. | 2013
- 1077
-
Thermo-/chemo-responsive shape memory/change effect in a hydrogel and its compositesZhang, J.L. / Huang, W.M. / Lu, H.B. / Sun, L. et al. | 2013
- 1089
-
Effect of density on the compression behaviour of corkAnjos, Ofélia / Rodrigues, Cátia / Morais, José / Pereira, Helena et al. | 2013
- 1097
-
Effect of the thermoforming process variables on the sheet friction coefficientMorales, Rosa A. / Candal, María V. / Santana, Orlando O. / Gordillo, Antonio / Salazar, Rubén et al. | 2013
- 1104
-
Structural characterization of aluminium alloy 7075–graphite composites fabricated by mechanical alloying and hot extrusionDeaquino-Lara, R. / Gutiérrez-Castañeda, E. / Estrada-Guel, I. / Hinojosa-Ruiz, G. / García-Sánchez, E. / Herrera-Ramírez, J.M. / Pérez-Bustamante, R. / Martínez-Sánchez, R. et al. | 2013
- 1112
-
Development of bus body rubber profiles with additives from renewable sources: Part I – Additives characterization and processing and cure properties of elastomeric compositionsGujel, A.A. / Bandeira, M. / Veiga, V.D. / Giovanela, M. / Carli, L.N. / Mauler, R.S. / Brandalise, R.N. / Crespo, J.S. et al. | 2013
- 1119
-
Development of bus body rubber profiles with additives from renewable sources: Part II – Chemical, physical–mechanical and aging characterization of elastomeric compositionsGujel, A.A. / Bandeira, M. / Giovanela, M. / Carli, L.N. / Brandalise, R.N. / Crespo, J.S. et al. | 2013
- IFC
-
Inside Front Cover (Editorial Board)| 2013