Year of publication
Source
Type of material
Licence
1–50 of 7,772 hits
Sort by:
Sort by:
-
Surface Roughness Control Simulation of Turning Processes
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
Ratcheting behavior of bearing support structures during windmilling in aero engines
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
The relationship between the cutting speed, tool wear, and chip formation during Ti-5553 dry cutting
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
Analysis of ignition risk in intermittent turning of UNS M11917 magnesium alloy at low cutting speeds based on the chip morphology
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
Variable Compliance-related Aspects of Chatter in Turning Thin-walled Tubular Parts
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
A note on the use of the minimum quantity lubrication (MQL) system in turning
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
Study on micro texturing of uncoated cemented carbide cutting tools for wear improvement and built-up edge stabilisation
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
Machining and ecological effects of a new developed cutting fluid in combination with different cooling techniques on turning operation
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
Effect of machining configuration on the corrosion of mild steel
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
Sustainability Issues in Turning Process: A Study in Indian Machining Industry
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
Vibration-based estimation of tool major flank wear in a turning process using ARMA models
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
A multi-objective teaching−learning-based optimization algorithm to scheduling in turning processes for minimizing makespan and carbon footprint
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
Wear mechanisms of WC–10Ni3Al carbide tool in dry turning of Ti6Al4V
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
Experimental measurement and optimization of tensile residual stress in turning process of Inconel718 superalloy
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
Investigation on Some Machinability Aspects of Inconel 825 During Dry Turning
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
A Tool Holder for Clamping Cutting Inserts Used for Turning in a Metal Cutting Operation
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
Mit UKP-Lasern zur polierten Oberfläche. Schneller und glatter. Ultrakurzpulslaser erweitern die Möglichkeiten in der Oberflächenveredlung von metallischen Werkstoffen
Tema Archive | 2015Keywords: Drehen (Bearbeitung) -
Optimisation of turning parameters by integrating genetic algorithm with support vector regression and artificial neural networks
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
Modeling and analysis of crater formation during wire electrical discharge turning (WEDT) process
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
Flexible Zahnradfertigung mit maximaler Effizienz
Tema Archive | 2015Keywords: Drehen (Bearbeitung) -
The effect of chip breaker geometry on chip shape, bending moment, and cutting force: FE analysis and experimental study
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
Study of Uncoated and Coated Carbide Insert on Tool Life, Surface Roughness and Material Removal Rate in Machining of EN27 steel
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
Laserunterstütztes Drehen von thermisch gespritzten WC-10Co-4Cr-Verschleißschutzschichten
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
Characterization and Performance of AlTiN, AlTiCrN, TiN/TiAlN PVD Coated Carbide Tools While Turning SS 304
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
Predictive modeling for flank wear progression of coated carbide tool in turning hardened steel under practical machining conditions
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
Investigation of lubricant condition and machining parameters while turning of AISI 4340
Tema Archive | 2015|Keywords: Drehen (Bearbeitung) -
A novel surface analytical model for cutting linearization error in fast tool/slow slide servo diamond turning
Tema Archive | 2014|Keywords: Drehen (Bearbeitung) -
Effect of Ultrasonic Vibrations on Chip–Tool Contact Zone in Turning of AISI304
Tema Archive | 2014|Keywords: Drehen (Bearbeitung) -
Parametric Investigation of Turning Process on En-31 Steel
Tema Archive | 2014|Keywords: Drehen (Bearbeitung) -
Adhesive chips of carbide tool at tuming processing of austentic steels
Tema Archive | 2014|Keywords: Drehen (Bearbeitung) -
A model to determine the optimal parameters for sustainable-energy machining in a multi-pass turning operation
Tema Archive | 2014|Keywords: Drehen (Bearbeitung) -
Kühlblockwellen aus Edelstahl verlängern Laufzeit
Tema Archive | 2014|Keywords: Drehen (Bearbeitung) -
Technological heredity when roller burnishing of ductile cast iron
Tema Archive | 2014|Keywords: Drehen (Bearbeitung) -
Effect of material microstructure and tool geometry on surface generation in single point diamond turning
Tema Archive | 2014|Keywords: Drehen (Bearbeitung) -
Machinability Enhancement of Lead-free Brass Alloys
Tema Archive | 2014|Keywords: Drehen (Bearbeitung) -
Multiresponse Optimization of Process Parameters in Turning of GFRP Using TOPSIS Method
Tema Archive | 2014|Keywords: Drehen (Bearbeitung) -
WC/Co Tool Wear in Dry Turning of Commercially Pure Aluminium
Tema Archive | 2014|Keywords: Drehen (Bearbeitung) -
Mit Multifunktionsmaschinen die Durchlaufzeit reduzieren
Tema Archive | 2014|Keywords: Drehen (Bearbeitung) -
Optimization of Machining Performance in High-Pressure Assisted Turning of Ti6Al4V Alloy
Tema Archive | 2014|Keywords: Drehen (Bearbeitung) -
Cutting Speed-Feed Coupled Experimental Model for Geometric Deviations in the Dry Turning of UNS A97075 Al-Zn Alloys
Tema Archive | 2014|Keywords: Drehen (Bearbeitung) -
Anforderungen aus dem Bearbeitungsprozess an neue Maschinen und Werkzeugkonzepte
Tema Archive | 2014|Keywords: Drehen (Bearbeitung) -
Automatische Maschinen-und Betriebsdatenerfassung für die Drehteilefertigung
Tema Archive | 2014Keywords: Drehen (Bearbeitung) -
Fast jede Dreh- und Fräsbearbeitung möglich. Dreh-Fräszentrum mit fünfachsfähiger Motorfrässpindel
Tema Archive | 2014Keywords: Drehen (Bearbeitung) -
Influence of the Dry Turning Parameters on the Ultimate Tensile Strength (UTS) of UNS A92024 Samples
Tema Archive | 2014|Keywords: Drehen (Bearbeitung) -
Modelling of a turning process using the gravitational search algorithm
Tema Archive | 2014|Keywords: Drehen (Bearbeitung) -
Assessment of cutting energy consumption and energy efficiency in machining of 4140 steel
Tema Archive | 2014|Keywords: Drehen (Bearbeitung) -
Zielgerichtet zum Erfolg. Werkzeugsysteme mit integrierten Kühlschmierlösungen
Tema Archive | 2014|Keywords: Drehen (Bearbeitung)
Send my search to (beta)
Send your search query (search terms without filters) to other databases, portals and catalogues to find more interesting hits.
Dimensions:
full data search
or
title and abstract search
Dimensions is a database for abstracts and citations that links information on research funding with the resulting publications, studies and patents.
TIB AV portal
In the TIB AV-Portal, audiovisual media from science and teaching can be foundand own scientific videos can be published.
Specialised Information Service for Mobility and Transport Research (FID move)
Open Research Knowledge Graph (ORKG)
The FID move can be used to search for subject-specific literature, research data and other information from mobility and transport research.
The Open Research Knowledge Graph provides structured descriptions of research content and makes it comparable.
Common Union Catalogue (GVK)
Freely accessible part of the collaborative K10plus catalogue with materials relevant for interlibrary loan and direct delivery services.