3-D numerical analysis for fluid flow and heat transfer in a micro chip by using an electro- hydrodynamic micro-pump (English)
- New search for: Lin, Chia-Wen
- New search for: Jang, Jiin-Yuh
- New search for: Lin, Chia-Wen
- New search for: Jang, Jiin-Yuh
In:
ICMM, International Conference on Microchannels and Minichannels, 3
;
215-221
;
2005
-
ISBN:
- Conference paper / Print
-
Title:3-D numerical analysis for fluid flow and heat transfer in a micro chip by using an electro- hydrodynamic micro-pump
-
Additional title:Dreidimensionale numerische Analyse der fluiden Strömung und des Wärmeüberganges in einem Mikrochip mit Hilfe einer elektrohydrodynamischen Mikropumpe
-
Contributors:Lin, Chia-Wen ( author ) / Jang, Jiin-Yuh ( author )
-
Published in:
-
Publisher:
- New search for: American Society of Mechanical Engineers (ASME)
-
Place of publication:New York
-
Publication date:2005
-
Size:7 Seiten, 10 Bilder, 21 Quellen
-
ISBN:
-
Type of media:Conference paper
-
Type of material:Print
-
Language:English
-
Keywords:
-
Source:
Table of contents conference proceedings
The tables of contents are generated automatically and are based on the data records of the individual contributions available in the index of the TIB portal. The display of the Tables of Contents may therefore be incomplete.
- 1
-
ICMM2005-75010 Gravity Influence of Convective Boiling Stability in a MinichannelBrutin, D. / Tadrist, L. / ASME et al. | 2005
- 1
-
Gravity influence on convective boiling stability in a minichannelBrutin, David / Tadrist, Lounes et al. | 2005
- 1
-
ICMM2005-75074 Challenges in Modelling Gas-Phase Flow in Microchannels: From Slip to TransitionBarber, R. W. / Emerson, D. R. / ASME et al. | 2005
- 9
-
ICMM2005-75026 Experimental Study of Flow Boiling Heat Transfer in Mini-TubeWang, L. / Chen, M. / Groll, M. / ASME et al. | 2005
- 9
-
Experimental study of flow boiling heat transfer in mini-tubeWang, Lihong / Chen, Min / Groll, Manfred et al. | 2005
- 11
-
ICMM2005-75075 Characterization of the Effect of Surface Roughness and Texture on Fluid Flow: Past, Present, and FutureTaylor, J. B. / Carrano, A. L. / Kandlikar, S. G. / ASME et al. | 2005
- 15
-
ICMM2005-75048 Modeling of Two-Phase Flow Instabilities in MicrochannelsChavan, N. S. / Bhattacharya, A. / Iyer, K. / ASME et al. | 2005
- 19
-
ICMM2005-75081 Update on Condensation Heat Transfer and Pressure Drop Inside MinichannelsCavallini, A. / Doretti, L. / Matkovic, M. / Rossetto, L. / ASME et al. | 2005
- 23
-
ICMM2005-75054 Experimental Study of Capillary Pumping During Vaporization in a Square Cross Section MicrochannelSerin, V. / Lavieille, P. / Miscevic, M. / ASME et al. | 2005
- 31
-
Comparison of microchannel array water evaporator designs by high-speed videographyHenning, Torsten / Brandner, Jürgen J. / Schubert, Klaus et al. | 2005
- 31
-
ICMM2005-75097 Comparison of Microchannel Array Water Evaporator Designs by High-Speed VideographyHenning, T. / Brandner, J. J. / Schubert, K. / ASME et al. | 2005
- 33
-
ICMM2005-75083 Processing and Analyzing Biological Samples in MicrochannelsFujii, T. / ASME et al. | 2005
- 37
-
ICMM2005-75084 Fundamental Data on the Gas-Liquid Two-Phase FlowFukano, T. / Kariyasaki, A. / Ide, H. / ASME et al. | 2005
- 41
-
ICMM2005-75124 Experimental Investigation of Flow Boiling in a Vertical Narrow ChannelSobierska, E. / Chmiel, K. / Kulenovic, R. / Mertz, R. / ASME et al. | 2005
- 41
-
Experimental investigation of flow boiling in a vertical narrow channelSobierska, Ewelina / Chmiel, Klaudia / Kulenovic, Rudi / Mertz, Rainer et al. | 2005
- 49
-
ICMM2005-75085 Two-Phase Microfluidics for Semiconductor Circuits and Fuel CellsHidrovo, C. H. / Kramer, T. A. / Wang, E. N. / Vigneron, S. / Steinbrenner, J. E. / Koo, J.-M. / Wang, F.-M. / Fogg, D. W. / Flynn, R. D. / Lee, E. S. et al. | 2005
- 49
-
ICMM2005-75128 Falling Film Evaporation of Pure Refrigerant HCFC123 in a Vertical Rectangular Minichannel Consisting of Offset Strip FinsOhara, J. / Koyama, S. / Kuwahara, K. / ASME et al. | 2005
- 57
-
ICMM2005-75141 Modeling and Design of Micro-Grooved Flat Plate EvaporatorShikazono, N. / Suehisa, Y. / Kasagi, N. / Iwata, H. / ASME et al. | 2005
- 59
-
ICMM2005-75086 High Flux Heat Removal With Microchannels: A Roadmap of Challenges and OpportunitiesKandlikar, S. G. / ASME et al. | 2005
- 59
-
High flux heat removal with microchannels - a roadmap of challenges and opportunitiesKandlikar, Satish G. et al. | 2005
- 65
-
ICMM2005-75142 Experimental Error Analysis and Heat Polynomial Method Improvement for Boiling Heat Transfer Numerical Calculations in MinichannelsPiasecka, M. / Poniewski, M. E. / Hozejowska, S. / ASME et al. | 2005
- 65
-
Experimental error analysis and heat polynomial method improvement for boiling heat transfer numerical calculations in minichannelsPiasecka, Magdalena / Poniewski, Mieczyslaw E. / Hozejowska, Sylwia et al. | 2005
- 69
-
The effects of inlet geometry on gas-liquid two-phase flow in microchannelsKawaji, Masahiro / Mori, Koji / Bolintineanu, Dan et al. | 2005
- 69
-
ICMM2005-75087 The Effects of Inlet Geometry on Gas-Liquid Two-Phase Flow in MicrochannelsKawaji, M. / Mori, K. / Bolintineanu, D. / ASME et al. | 2005
- 73
-
ICMM2005-75143 Numerical Study of the Effect of Inlet Constriction on Bubble Growth During Flow Boiling in MicrochannelsMukherjee, A. / Kandlikar, S. G. / ASME et al. | 2005
- 77
-
ICMM2005-75088 Microchannels as Models of Pathophysiological Blood Cell AdhesionKing, M. R. / ASME et al. | 2005
- 81
-
ICMM2005-75144 Boiling Enhancement in a Mini-Channel of a Three-Phase Circulating Fluidised BedArumemi-Ikhide, M. / Sefiane, K. / ASME et al. | 2005
- 85
-
ICMM2005-75090 Researches of Heat and Mass Transfer Utilizing MEMS Technology: Review of Recent Researches in JapanMatsumoto, S. / ASME et al. | 2005
- 89
-
Effects of dissolved air on subcooled flow boiling of a dielectric coolant in a microchannel heat sinkChen, Tailian / Ganmella, Suresh V. et al. | 2005
- 89
-
ICMM2005-75157 Effects of Dissolved Air on Subcooled Flow Boiling of a Dielectric Coolant in a Microchannel Heat SinkChen, T. / Garimella, S. V. / ASME et al. | 2005
- 93
-
Viscous dissipation as scaling effect for liquid flows in microchannelsMorini, Gian Luca et al. | 2005
- 93
-
ICMM2005-75091 Viscous Dissipation as Scaling Effect for Liquid Flows in MicrochannelsMorini, G. L. / ASME et al. | 2005
- 97
-
ICMM2005-75163 Bubble Characteristics During Boiling in MicrochannelsLiu, J.-T. / Tian, Y. / Peng, X.-F. / ASME et al. | 2005
- 103
-
Evaporative heat transfer and pressure drop of CO2 in a microchannel tubeJeong, Siyoung / Cho, Eunsang / Kim, Hark-koo et al. | 2005
- 103
-
ICMM2005-75092 Plate Heat Exchangers: Calculation Methods for Single- and Two-Phase FlowPalm, B. / Claesson, J. / ASME et al. | 2005
- 103
-
ICMM2005-75180 Evaporative Heat Transfer and Pressure Drop of CO~2 in a Microchannel TubeJeong, S. / Cho, E. / Kim, H.-k. / ASME et al. | 2005
- 109
-
ICMM2005-75185 Effect of Operating Pressure on Flow Boiling Heat Transfer in MicrochannelsBang, K. H. / Yoon, T. Y. / ASME et al. | 2005
- 115
-
ICMM2005-75197 Experimental Evaluation of Pressure Drop Elements and Fabricated Nucleation Sites for Stabilizing Flow Boiling in Minichannels and MicrochannelsKandlikar, S. G. / Willistein, D. A. / Borrelli, J. / ASME et al. | 2005
- 115
-
ICMM2005-75093 Heterogeneous Condensation for Space Applications: Nanoparticle Condensation Nuclei in MicrochannelSon, S. Y. / Greenberg, P. S. / Sankovic, J. M. / ASME et al. | 2005
- 119
-
ICMM2005-75094 Engineering a Bioartificial Liver DeviceTilles, A. W. / Park, J. / ASME et al. | 2005
- 125
-
ICMM2005-75209 Convective Boiling in Silicon Microchannels With Localized Heating and ThermometryFlynn, R. D. / Kramer, T. A. / Koo, J.-M. / Cheng, C.-H. / Fogg, D. W. / Wang, E. N. / Goodson, K. E. / ASME et al. | 2005
- 127
-
ICMM2005-75095 Recent Trends in the Visualization Studies of Interfacial Phenomena in MicrochannelsYoo, J. Y. / ASME et al. | 2005
- 131
-
ICMM2005-75228 Visualization of Convective Boiling Heat Transfer in Single Micro-Conduits With Different Shapes of Cross SectionsYen, T.-H. / Shoji, M. / Takemura, F. / Suzuki, Y. / Kasagi, N. / ASME et al. | 2005
- 131
-
Visualization of convective boiling heat transfer in single micro-conduits with different shapes of cross sectionsYen, Tzu-Hsiang / Shoji, Masahiro / Takemura, Fumio / Suzuki, Yuji / Kasagi, Nobuhide et al. | 2005
- 135
-
ICMM2005-75117 Differences Between Liquid and Gas Flows at the MicroscaleGad-el-Hak, M. / ASME et al. | 2005
- 135
-
Differences between liquid and gas flows at the microscaleGad-el-Hak, Mohamed et al. | 2005
- 139
-
ICMM2005-75231 Microbubble Emission Boiling in a Rectangular Channel FlowTange, M. / Watanabe, M. / Takagi, S. / Takemura, F. / Shoji, M. / ASME et al. | 2005
- 145
-
ICMM2005-75253 Annular Liquid Film Flow Under Local Heating in MicrochannelsGatapova, E. Y. / Kuznetsov, V. V. / Kabov, O. A. / Legros, J.-C. / ASME et al. | 2005
- 153
-
ICMM2005-75203 Hydrodynamic Dispersion in Microfluidic Geometries: Causes and Remedies (Plenary Paper)Leighton, D. T. / Dutta, D. / ASME et al. | 2005
- 153
-
ICMM2005-75008 The Converging Minichannel Effects at the Condenser of a Mini CPL Heat PipeKim, J.-H. S. / Karng, S. W. / Lee, S.-C. / ASME et al. | 2005
- 159
-
ICMM2005-75045 Thermal Design of Microchannel Heat Sinks for Low-Orbit Micro-SatellitesHeresztyn, A. J. H. / Okamoto, N. C. D. / ASME et al. | 2005
- 163
-
Thermal effects on fluid flow in mini/micro channelGuo, Zeng-Yuan / Liang, Xin-Gang et al. | 2005
- 163
-
ICMM2005-75240 Thermal Effects on Fluid Flow in Mini/Micro ChannelGuo, Z.-Y. / Liang, X.-G. / ASME et al. | 2005
- 167
-
Orientation-free micro heat pipeSakurai, Hisashi / Koizumi, Yasuo / Ohtake, Hiroyasu et al. | 2005
- 167
-
ICMM2005-75066 Orientation-Free Micro Heat PipeSakurai, H. / Koizumi, Y. / Ohtake, H. / ASME et al. | 2005
- 173
-
ICMM2005-75245 Micro and Nano Assembly Using Dielectrophoretic ForcesNelson, B. J. / Dong, L. / Subramanian, A. / Vikradaditya, B. / Bell, D. / ASME et al. | 2005
- 173
-
Micro and nano assembly using dielectrophoretic forcesNelson, Bradley J. / Dong, Lixin / Subramanian, Arunkumar / Vikramaditya, Barmeshwar / Bell, Dominik et al. | 2005
- 175
-
ICMM2005-75115 The Effect of Type of Working Fluid on the Heat Transport Capacity of a Micro Heat PipeDharmalingam, S. / Tio, K. K. / ASME et al. | 2005
- 183
-
ICMM2005-75256 Stochastic Frequency Signature for Chemical Sensing via Noninvasive Cell-Electronic InterfaceOzkan, C. S. / ASME et al. | 2005
- 183
-
ICMM2005-75122 Steady-State and Transient Performance of a Miniature Loop Heat PipeChen, Y. / Groll, M. / Mertz, R. / Maydanik, Y. F. / Vershinin, S. V. / ASME et al. | 2005
- 189
-
ICMM2005-75258 Surface Tension Effects in Small-Scale Thermo-Fluid SystemsShoji, M. / Someya, S. / Yen, T.-H. / Tange, M. / ASME et al. | 2005
- 191
-
ICMM2005-75227 Effects of Cross-Section Geometry of Capillary on the Evaporation From the MeniscusJin, S. / Choi, C. / Breuer, K. S. / Yoo, J. Y. / ASME et al. | 2005
- 199
-
High performance single-phase liquid coolers for power electronicsCheong, Brian C.Y. / Ireland, Peter T. / Siebert, Annegret W. et al. | 2005
- 199
-
ICMM2005-75027 High Performance Single-Phase Liquid Coolers for Power ElectronicsCheong, B. C. Y. / Ireland, P. T. / Siebert, A. W. / ASME et al. | 2005
- 203
-
ICMM2005-75259 The Generation, Characterization and Application of Microvortices in Microfluidic SystemsShelby, J. P. / Lim, D. S. W. / Kuo, J. S. / Chiu, D. T. / ASME et al. | 2005
- 203
-
The generation, characterization, and application of microvortices in microfluidic systemsShelby, J. Patrick / Lim, David S.W. / Kuo, Jason S. / Chiu, Daniel T. et al. | 2005
- 209
-
ICMM2005-75068 Design of a Test Facility and Micro-Channel Heat Exchanger Prototype for High Power Electronic ComponentsMcGlen, R. J. / Lee, J. / Buffone, C. / ASME et al. | 2005
- 209
-
Design of a test facility and micro-channel heat exchanger prototype for high power electronic componentsMcGlenn, Ryan J. / Lee, Jon / Buffone, Cosimo et al. | 2005
- 211
-
ICMM2005-75009 Ionic and Non-Ionic Laminar Liquid Flows in Fused Silica MicrotubesBrutin, D. / Tadrist, L. / ASME et al. | 2005
- 215
-
ICMM2005-75078 3-D Numerical Analysis for Fluid Flow and Heat Transfer in a Micro Chip by Using an Electro-Hydrodynamic Micro-PumpLin, C.-W. / Jang, J.-Y. / ASME et al. | 2005
- 215
-
3-D numerical analysis for fluid flow and heat transfer in a micro chip by using an electro- hydrodynamic micro-pumpLin, Chia-Wen / Jang, Jiin-Yuh et al. | 2005
- 217
-
ICMM2005-75019 Local Heat Transfer Measurements in Micro Geometries Using Liquid Crystal ThermographyMuwanga, R. S. / Hassan, I. G. / ASME et al. | 2005
- 217
-
Local heat transfer measurements in micro geometries using liquid crystal thermographyMuwanga, Roland S. / Hassan, Ibrahim G. et al. | 2005
- 223
-
ICMM2005-75156 Pressure Drop Over MEMS-Based Micro Scale Pin Fin Heat SinksPeles, Y. / Kosar, A. / Mishra, C. / Kuo, C.-J. / Schneider, B. / ASME et al. | 2005
- 225
-
ICMM2005-75024 The Effects of Viscous Heating and the Pressure-Dependent Viscosity on Liquid Flow in MicrotubesSilber-Li, Z.-H. / Cui, H.-H. / ASME et al. | 2005
- 231
-
ICMM2005-75239 Thermal Performance of Silicon Micro Heat-Sinks With Electrokinetically-Driven FlowsMorini, G. L. / Lorenzini, M. / Salvigni, S. / Spiga, M. / ASME et al. | 2005
- 231
-
Thermal performance of silicon micro heat-sinks with electrokinetically-driven flowsMorini, Gian Luca / Lorenzini, Marco / Salvigni, Sandro / Spiga, Marco et al. | 2005
- 233
-
ICMM2005-75070 Development of an Experimental Facility for Investigating Single-Phase Liquid Flow in MicrochannelsSteinke, M. E. / Kandlikar, S. G. / Magerlein, J. H. / Colgan, E. / Raisanen, A. D. / ASME et al. | 2005
- 233
-
Development of an experimental facility for investigating single-phase liquid flow in microchannelsSteinke, Mark E. / Kandlikar, Satish G. / Magerlein, J.H. / Colgan, Evan / Raisanen, Alan D. et al. | 2005
- 237
-
ICMM2005-75241 Design of a Polymeric Mini-Channelled System for the Cooling of a High-Energy Particle Detector at FERMILABChignoli, L. / Cossali, G. E. / Marengo, M. / ASME et al. | 2005
- 245
-
Variable property effects in single-phase incompressible flows through micro tubesHerwig, Heinz / Mahulikar, Shripad P. et al. | 2005
- 245
-
ICMM2005-75082 Variable Property Effects in Single-Phase Incompressible Flows Through Micro TubesHerwig, H. / Mahulikar, S. P. / ASME et al. | 2005
- 249
-
ICMM2005-75250 Micro-Jet Arrays for Cooling of Electronic EquipmentOverholt, M. R. / McCandless, A. / Kelly, K. W. / Becnel, C. J. / Motakef, S. / ASME et al. | 2005
- 249
-
Micro-jet arrays for cooling of electronic equipmentOverholt, Matthew R. / McCandless, Andrew / Kelly, Kevin W. / Becnel, Charles J. / Motakef, Shariar et al. | 2005
- 251
-
ICMM2005-75096 Microtube Fluid Dynamic Characteristics With MTV Qualified Flow ConditionsPetersen, S. / Costaschuk, D. / Elsnab, J. / Klewicki, J. / Ameel, T. / ASME et al. | 2005
- 253
-
ICMM2005-75029 Development of a Silicon-Based Wettability Controlled Membrane for Microscale Two-Phase SystemsAlyousef, Y. / Yao, S.-C. / ASME et al. | 2005
- 259
-
ICMM2005-75108 Pressure Drop of Fully-Developed, Laminar Flow in Rough MicrotubesBahrami, M. / Yovanovich, M. M. / Culham, J. R. / ASME et al. | 2005
- 259
-
Pressure drop of fully-developed, laminar flow in rough microtubesBahrami, M. / Yovanovich, M.M. / Culham, J.R. et al. | 2005
- 261
-
ICMM2005-75179 Self-Breakup of Microdroplets by Molecular Self-AssemblyMo, G. C. / Kwok, D. Y. / ASME et al. | 2005
- 267
-
ICMM2005-75181 Flow Characteristics of Micro Diffuser/Nozzles for a Valveless MicropumpJeong, S. / Kim, D. / Kim, H. K. / Hur, N. / ASME et al. | 2005
- 267
-
Flow characteristics of micro diffuser/nozzles for a valveless micropumpJeong, Siyoung / Kim, Donghwan / Kim, Hyun Keun / Hur, Nahmkeon et al. | 2005
- 269
-
ICMM2005-75109 Pressure Drop of Fully-Developed, Laminar Flow in Microchannels of Arbitrary Cross-SectionBahrami, M. / Yovanovich, M. M. / Culham, J. R. / ASME et al. | 2005
- 273
-
ICMM2005-75207 Pull-In Extension of MEMS Electrostatic Microactuators Using an Active Control MethodSun, Y. / Piyabongkarn, D. / Rajamani, R. / Nelson, B. J. / ASME et al. | 2005
- 273
-
Pull-in extension of MEMS electrostatic microactuators using an active control methodSun, Y. / Piyabongkarn, D. / Rajamani, R. / Nelson, B.J. et al. | 2005
- 281
-
ICMM2005-75111 Effects of Repeating Microstructures on Pressure Drop in Rectangular MinichannelsSchmitt, D. J. / Kandlikar, S. G. / ASME et al. | 2005
- 281
-
ICMM2005-75208 Performance Characteristics of a Membrane Driven Variable Flow Rate Micro-PumpJeong, S.-Y. / Thorud, J. D. / Pence, D. V. / Liburdy, J. A. / ASME et al. | 2005
- 287
-
ICMM2005-75053 Quantitative Evaluation of Mixing Efficiency of Split-and-Recombine Mixing MethodHamanaka, O. / Kato, H. / ASME et al. | 2005
- 291
-
ICMM2005-75112 Single-Phase Liquid Friction Factors in MicrochannelsSteinke, M. E. / Kandlikar, S. G. / ASME et al. | 2005
- 291
-
Single-phase liquid friction factors in microchannelsSteinke, Mark E. / Kandlikar, Satish G. et al. | 2005
- 293
-
Thermocapillary convection in thin liquid films on walls with microgroovesAlexeev, Alexander / Gambaryan-Roisman, Tatiana / Stephan, Peter et al. | 2005
- 293
-
ICMM2005-75076 Thermocapillary Convection in Thin Liquid Films on Walls With MicrogroovesAlexeev, A. / Gambaryan-Roisman, T. / Stephan, P. / ASME et al. | 2005
- 303
-
ICMM2005-75125 Silicon Microstructures for High Throughput Mixing DevicesKockmann, N. / Kiefer, T. / Engler, M. / Woias, P. / ASME et al. | 2005
- 303
-
ICMM2005-75126 Review of Experimental Procedures for Determining Liquid Flow in MicrochannelsFerguson, A. D. / Bahrami, M. / Culham, J. R. / ASME et al. | 2005
- 303
-
Silicon microstructures for high throughput mixing devicesKockmann, Norbert / Kiefer, Thomas / Engler, Michael / Woias, Peter et al. | 2005
- 309
-
ICMM2005-75165 Enhancement of Mixing for Electro-Kinetically Driven Side Channel Type MicromixerWu, C.-H. / Yang, R.-J. / ASME et al. | 2005
- 313
-
ICMM2005-75129 Flow Characteristics in a Trapezoidal Silicon MicrochannelHao, P.-F. / He, F. / Yao, Z.-H. / ASME et al. | 2005
- 317
-
ICMM2005-75187 Microfabrication of the Split and Recombination Micromixer and the Effect of Its Cross-Sectional RotationLee, S. W. / Lee, S. S. / ASME et al. | 2005
- 319
-
Slip of water in sub-millimeter diameter hydrogel tubesMorikawa, Hirohisa / Islam, Mohammad Hamidul / Hirai, Toshihiro et al. | 2005
- 319
-
ICMM2005-75130 Slip of Water in Sub-Millimeter Diameter Hydrogel TubesMorikawa, H. / Islam, M. H. / Hirai, T. / ASME et al. | 2005
- 323
-
Aerosol particle deposition in a T-shaped micro mixerWengeler, Robert / Heim, Michael / Wild, Markus / Nirschl, Hermann / Kasper, Gerhard / Kockmann, Norbert / Engler, Michael / Woias, Peter et al. | 2005
- 323
-
ICMM2005-75199 Aerosol Particle Deposition in a T-Shaped Micro MixerWengeler, R. / Heim, M. / Wild, M. / Nirschl, H. / Kasper, G. / Kockmann, N. / Engler, M. / Woias, P. / ASME et al. | 2005
- 325
-
ICMM2005-75164 Numerical Method of Unsteady Viscous Microchannel Fluid FlowsLiu, N. / Chevray, R. / Domoto, G. A. / Panides, E. / ASME et al. | 2005
- 329
-
ICMM2005-75236 Scaling for Microfluidic MixingChao, S.-h. / Holl, M. R. / Koschwanez, J. H. / Seriburi, P. / Meldrum, D. R. / ASME et al. | 2005
- 333
-
ICMM2005-75183 An Investigation of Single-Phase Incompressible Flows Through Rectangular Micro-Constriction ElementsMishra, C. / Peles, Y. / ASME et al. | 2005
- 333
-
An investigation of single-phase incompressible flows through rectangular micro-constriction elementsMishra, Chandan / Peles, Yoav et al. | 2005
- 337
-
ICMM2005-75243 Inertia Driven Dispersion Between Patterned SurfacesAssemat, P. / Bergeon, A. / Plouraboue, F. / ASME et al. | 2005
- 343
-
ICMM2005-75005 Numerical Solution of Two-Fluid Electroosmotic FlowGao, Y. / Yap, Y. F. / Wong, T. N. / Chai, J. C. / Yang, C. / Ooi, K. T. / ASME et al. | 2005
- 343
-
Measurement of near-wall liquid temperatures in single-phase flows through silicon microchannelsPatil, Vishal A. / Narayanan, Vinod et al. | 2005
- 343
-
ICMM2005-75212 Measurement of Near-Wall Liquid Temperatures in Single-Phase Flows Through Silicon MicrochannelsPatil, V. A. / Narayanan, V. / ASME et al. | 2005
- 349
-
Novel fabrication and testing of a bubble-powered micropumpJung, Jung-Yeul / Kwak, Ho-Young et al. | 2005
- 349
-
ICMM2005-75015 Novel Fabrication and Testing of a Bubble-Powered MicropumpJung, J.-Y. / Kwak, H.-Y. / ASME et al. | 2005
- 351
-
A numerical study of laminar convective heat transfer in microchannel with non-circular cross-sectionLi, Zhuo / Tao, Wen-Quan / He, Ya-Ling et al. | 2005
- 351
-
ICMM2005-75221 A Numerical Study of Laminar Convective Heat Transfer in Microchannel With Non-Circular Cross-SectionLi, Z. / Tao, W.-Q. / He, Y.-L. / ASME et al. | 2005
- 355
-
ICMM2005-75017 Investigation of Particle Electrophoretic Motion in Converging-Diverging MicrochannelsXuan, X. / Xu, B. / Li, D. / ASME et al. | 2005
- 361
-
ICMM2005-75098 Modeling of Heat and Mass Transfer for Microflows in Porous MediaPreux, C. / ASME et al. | 2005
- 361
-
Control of laminar flow and mass transport in crossing linked microchannels for micro fabricationShao, Zhanjie / Ren, Carolyn L. / Schneider, Gerry et al. | 2005
- 361
-
ICMM2005-75021 Control of Laminar Flow and Mass Transport in Crossing Linked Microchannels for Micro FabricationShao, Z. / Ren, C. / Schneider, G. / ASME et al. | 2005
- 361
-
Modeling of heat and mass transfer for microflows in porous mediaPreux, Christophe et al. | 2005
- 369
-
ICMM2005-75023 Three-Dimensional Simulation of Gas Flow in MicroductsAgrawal, A. / ASME et al. | 2005
- 369
-
ICMM2005-75131 A Strict Kinetic Solution of the Finite Length Microchannel Flow ProblemShen, C. / ASME et al. | 2005
- 375
-
ICMM2005-75135 Sonic Point Position and Critical Pressure Ratio in Micro NozzleHe, F. / Hao, P.-F. / Ding, Y.-T. / Yao, Z.-H. / ASME et al. | 2005
- 375
-
Sonic point position and critical pressure ratio in micro nozzleHe, Feng / Hao, Peng-Fei / Ding, Ying-Tao / Yao, Zhao-Hui et al. | 2005
- 377
-
ICMM2005-75033 Time- and Frequency- Domain Analysis of Transient Electroosmotic Flow induced by Sinusoidal AC Electric Field in a Curved MicrotubeLuo, W.-J. / Chen, J.-K. / Yang, R.-J. / ASME et al. | 2005
- 381
-
ICMM2005-75184 Experimental Investigation of Heat Transfer in Square and Circular Minichannel Air Flow for Wide Range of Pressure RatioHara, K. / Furukawa, M. / Akihiro, N. / ASME et al. | 2005
- 385
-
ICMM2005-75041 Complete Micro-PIV Characterisation of Microfluidic DevicesBown, M. R. / Maclnnes, J. M. / Allen, R. W. K. / ASME et al. | 2005
- 385
-
Complete micro-PIV characterisation of microfluidic devicesBown, Mark R. / McInnes, Jordan M. / Allen, Ray W.K. et al. | 2005
- 389
-
ICMM2005-75254 Estimation of Measured Data of Microchannel Gas FlowsFan, J. / Xie, C. / Jiang, J.-Z. / ASME et al. | 2005
- 391
-
Numerical simulations of macromolecular syntheses in micro-mixers: towards a better control of the polymerizationSerra, Christophe / Sary, Nicolas / Schlatter, Guy et al. | 2005
- 391
-
ICMM2005-75044 Numerical Simulations of Macromolecular Syntheses in Micro-Mixers: Towards a Better Control of the PolymerizationSerra, C. / Sary, N. / Schlatter, G. / ASME et al. | 2005
- 393
-
ICMM2005-75257 Recent Results of Rarefied Gas Dynamics and Their Applications in MicroflowsSharipov, F. / ASME et al. | 2005
- 397
-
ICMM2005-75059 Microfluidic Device Fabrication Method Using Direct Thick Film WritingGrande, W. J. / Fino, G. A. / ASME et al. | 2005
- 397
-
Microfluidic device fabrication method using direct thick film writingGrande, William J. / Fino, Gary A. et al. | 2005
- 399
-
ICMM2005-75043 Continuum Modeling of Gas Flows in MicronozzlesMo, H. L. / Gadepalli, V. V. / Skudarnov, P. V. / Lin, C. X. / ASME et al. | 2005
- 399
-
Continuum modeling of gas flows in micronozzlesMo, H.L. / Gadepalli, V.V. / Skudarnov, P.V. / Lin, C.X. et al. | 2005
- 403
-
ICMM2005-75062 An Integrated Microfluidic Dielectrophoretic (DEP) Cell Fractionation SystemLi, Y. / Dalton, C. / Said, H. / Kaler, K. V. I. S. / ASME et al. | 2005
- 403
-
An integrated microfluidic dielectrophoretic (DEP) cell fractionation systemLi, Youlan / Dalton, Colin / Said, Humud / Kaler, Karan V.I.S. et al. | 2005
- 405
-
ICMM2005-75047 Numerical Modeling of Gas Flow in Square MicrochannelsMo, H. L. / Ye, C. M. / Gadepalli, V. V. / Lin, C. X. / ASME et al. | 2005
- 411
-
ICMM2005-75063 An Integrated PDMS Microfluidic Device for Dielectrophoretic Separation of Malignant CellsKanagasabapathi, T. T. / Dalton, C. / Kaler, K. V. I. S. / ASME et al. | 2005
- 411
-
An integrated PDMS microfluidic device for dielectrophoretic separation of malignant cellsKanagasabapathi, Thirukumaran T. / Dalton, Colin / Kaler, Karan V.I.S. et al. | 2005
- 411
-
ICMM2005-75064 Entrance Region Flows i Rectangular Microchannels With Constant Wall TemperatureNiazmand, H. / Tercan, G. / Renksizbulut, M. / ASME et al. | 2005
- 419
-
ICMM2005-75067 Flow and Heat Transfer in a Square Minichannel With Rounded CornersOosthuizen, P. H. / ASME et al. | 2005
- 419
-
A computational model for heat transfer in multichannel microreactorsHardt, S. / Baier, T. et al. | 2005
- 419
-
ICMM2005-75079 A Computational Model for Heat Transfer in Multichannel MicroreactorsHardt, S. / Baier, T. / ASME et al. | 2005
- 419
-
Flow and heat transfer in a square minichannel with rounded cornersOosthuizen, Patrick H. et al. | 2005
- 427
-
ICMM2005-75077 A Numerical Study of Channel-to-Channel Flow Cross-Over Through the Gas Diffusion Layer in a PEM Fuel Cell Type Flow System Using a Serpentine Flow Channel With a Trapezoidal Cross-Sectional ShapeSun, L. / Oosthuizen, P. H. / McAuley, K. B. / ASME et al. | 2005
- 427
-
A numerical study of channel-to-channel flow cross-over through the gas diffusion layer in a pem fuel cell type flow system using a serpentine flow channel with a trapezoidal cross-sectional shapeSun, Lan / Oosthuizen, Patrick H. / McAuley, Kim B. et al. | 2005
- 427
-
ICMM2005-75080 Study of the Temperature Field in Microchannels of a PDMS Chip With Embedded Local Heater Using Temperature-Dependent Fluorescent DyeFu, R. / Xu, B. / Li, D. / ASME et al. | 2005
- 433
-
ICMM2005-75102 Transient Joule Heating and Its Effects on Electroosmotic Flow in a Microcapillary Packed Wth MicrospheresYang, Y. / Yang, C. / Huang, X. / ASME et al. | 2005
- 433
-
ICMM2005-75123 Heat Transfer Characteristics of Gaseous Flows in Micro-Channels With Constant Heat FluxHong, C. / Asako, Y. / ASME et al. | 2005
- 441
-
A study on the flow characteristics of micro-elbowsKim, T.A. / Kim, Youn J. Kim et al. | 2005
- 441
-
ICMM2005-75188 A Study on the Flow Characteristics of Micro-ElbowsKim, T.-A. / Kim, Y. J. / ASME et al. | 2005
- 441
-
ICMM2005-75104 Review and Fabrication of Nanochannels for Single Phase Liquid FlowPerry, J. L. / Kandlikar, S. G. / ASME et al. | 2005
- 447
-
ICMM2005-75193 Numerical Simulation of Gaseous Flow and Heat Transfer in Laminar Slip Flow RegimeCroce, G. / Arato, V. / ASME et al. | 2005
- 449
-
ICMM2005-75113 A-Posteriori Finite Element Bound and Adaptive Discretization Methods for the Electro-Osmotic Flows in Heterogeneous MicrochannelsChoi, H.-W. / Paraschivoiu, M. / ASME et al. | 2005
- 453
-
ICMM2005-75099 A Variance Reduction Approach for Monte Carlo Solutions of the Non-Linear Boltzmann EquationBaker, L. L. / Hadjiconstantinou, N. G. / ASME et al. | 2005
- 457
-
ICMM2005-75116 Electrokinetic Concentration Gradient Generation Using a Converging-Diverging MicrochannelLee, J. S. H. / Hu, Y. / Li, D. / ASME et al. | 2005
- 457
-
Electrokinetic concentration gradient generation using a converging-diverging microchannelLee, Jacky S.H. / Hu, Yandong / Li, Dongqing et al. | 2005
- 461
-
ICMM2005-75100 Deviations of the Results for the Properties of a Dense Hard-Sphere Gas Near the Walls of a Micro Channel Using the Hybrid Molecular Dynamics: Monte Carlo Simulation MethodNedea, S. V. / Frijns, A. J. H. / van Steenhoven, A. A. / Markvoort, A. J. / Hilbers, P. A. J. / ASME et al. | 2005
- 465
-
ICMM2005-75119 Enhancement of the Concentration Gradients Generated In Microchambers Appended in Microfluidic SystemsHu, Y. / Lee, J. S. H. / Wemer, C. / Li, D. / ASME et al. | 2005
- 465
-
Enhancement of the concentration gradients generated in microchambers appended in microfluidic systemsHu, Yandong / Lee, Jacky S.H. / Werner, Carsten / Li, Dongqing et al. | 2005
- 469
-
ICMM2005-75133 Gases Mixing in Microchannels Using DSMCWang, M. / Li, Z. / ASME et al. | 2005
- 473
-
ICMM2005-75132 A Wire Loop Design for Convection-Enhanced Dielectrophoretic Bioparticle TrappingGagnon, Z. / Chang, H.-C. / ASME et al. | 2005
- 473
-
A wire loop design for convection-enhanced dielectrophoretic bioparticle trappingGagnon, Zachary / Chang, Hsueh-Chia et al. | 2005
- 477
-
ICMM2005-75146 Similarity of Microscale and Rarefied Gas FlowsLan, X. / Li, Z. / Wang, M. / ASME et al. | 2005
- 481
-
Micro particle imaging velocimetry measurements in high aspect ratio passive microfluidic componentsChiarot, Paul / Sullivan, Pierre / Ben Mrad, Ridha et al. | 2005
- 481
-
ICMM2005-75137 Micro Particle Imaging Velocimetry Measurements in High Aspect Ratio Passive Microfluidic ComponentsChiarot, P. / Sullivan, P. / Mrad, R. B. / ASME et al. | 2005
- 483
-
ICMM2005-75247 Kinetic Modeling of Temperature Driven Flows in Short MicrochannelsAlexeenko, A. A. / Gimelshein, S. F. / Muntz, E. P. / Ketsdever, A. D. / ASME et al. | 2005
- 487
-
A new monolithic electrokinetic pump with bubble-less designWang, Ping / Chen, Zilin / Chang, Hsueh-Chia et al. | 2005
- 487
-
ICMM2005-75145 A New Monolithic Electrokinetic Pump With Bubble-Less DesignWang, P. / Chen, Z. / Chang, H.-C. / ASME et al. | 2005
- 493
-
ICMM2005-75072 Comparison of Crossflow Micro Heat Exchangers With Different Microstructure DesignsBrandner, J. J. / Henning, T. / Schygulla, U. / Wenka, A. / Zimmermann, S. / Schubert, K. / ASME et al. | 2005
- 493
-
Comparison of crossflow micro heat exchangers with different microstructure designsBrandner, Juergen J. / Henning, Torsten / Schygulla, Ulrich / Wenka, Achim / Zimmermann, Stefan / Schubert, Klaus et al. | 2005
- 495
-
ICMM2005-75148 Development of an Automatic Electrokinetically-Controlled Microfluidic Immunoassay for the Detection of Helicobacter PyloriGao, Y. / Hu, G. / Lin, F. Y. H. / Sherman, P. M. / Li, D. / ASME et al. | 2005
- 503
-
ICMM2005-75160 Analysis of Fluid Flow and Heat Transfer in Microchannels Using Combined Pressure Gradient and Electroosmotic PumpingMonazami, R. / Zade, A. Q. / Manazari, M. T. / ASME et al. | 2005
- 503
-
ICMM2005-75154 Micro Air Bubble Manipulation by Electrowetting Principle: Transporting, Merging and EliminatingZhao, Y. / Cho, S. K. / ASME et al. | 2005
- 511
-
ICMM2005-75162 Fluid Flow Behaviour in Microneedle ArraysSan, A. N. / Mrad, R. B. / Sullivan, P. / ASME et al. | 2005
- 511
-
Thermocapillary convection and interface deformation in a liquid film flowing inside a micro-slot with structured wallsGambaryan-Roisman, Tatiana / Stephan, Peter et al. | 2005
- 511
-
ICMM2005-75189 Thermocapillary Convection and Interface Deformation in a Liquid Film Flowing Inside a Micro-Slot With Structured WallsGambaryan-Roisman, T. / Stephan, P. / ASME et al. | 2005
- 517
-
ICMM2005-75170 On the Slip Mechanism of Microfluidics by Means of a Mean-Field Free-Energy Lattice Boltzmann MethodZhang, J. / Kwok, D. Y. / ASME et al. | 2005
- 519
-
ICMM2005-75195 Enhanced Boiling Heat Transfer in Second Generation Microchannels: Part A - Methods and Preliminary ResultsJensen, M. K. / Peles, Y. / Venngallatore, S. / Kosar, A. / Kuo, C.-J. / ASME et al. | 2005
- 523
-
ICMM2005-75171 Droplet Movements and Continuous Flows in Rough and Hydrophobic MicrochannelsZhang, J. / Mohammadi, R. / Kwok, D. Y. / ASME et al. | 2005
- 529
-
Enhanced boiling heat transfer in second generation microchannels part B: sub-atmospheric resultsKosar, Ali / Kuo, Chin-Jung / Peles, Yoav / Jensen, Michael K. et al. | 2005
- 529
-
ICMM2005-75174 Electrokinetic Generation Efficiency With Finite External LoadsLu, F. / Mansouri, A. / How, T. Y. / Kostiuk, L. W. / Kwok, D. Y. / ASME et al. | 2005
- 529
-
ICMM2005-75196 Enhanced Boiling Heat Transfer in Second Generation Microchannels: Part B - Sub-Atmospheric ResultsKosar, A. / Kuo, C.-J. / Peles, Y. / Jensen, M. K. / ASME et al. | 2005
- 535
-
ICMM2005-75175 Effect of Solid-Fluid Energy Parameters on Streaming Potential and Flow Rate in Pressure-Driven Flow in MicrochannelsTian, F. / Zhang, J. / Kwok, D. Y. / ASME et al. | 2005
- 537
-
ICMM2005-75223 Lattice Boltzmann Model for Flow and Heat Transfer of Nanofluids in a MicrochannelWu, X. / Kumar, R. / ASME et al. | 2005
- 541
-
ICMM2005-75176 Influence of Entrance and Exit Conditions on the Transient Evolution of Streaming Potential in a Finite Length MicrochannelMansouri, A. / Scheuerman, C. / Bhattacharjee, S. / Kwok, D. Y. / Kostiuk, L. W. / ASME et al. | 2005
- 545
-
Enhanced microconvection through distributed heat source modulationBazylak, Aimy / Djilali, Ned / Sinton, David et al. | 2005
- 545
-
ICMM2005-75232 Enhanced Microconvection Through Distributed Heat Source ModulationBazylak, A. / Djilali, N. / Sinton, D. / ASME et al. | 2005
- 551
-
Fabrication of polymeric microfluidic device for on-chip isolation of nucleic acidsBhattacharyya, Arpita / Klapperich, Catherine et al. | 2005
- 551
-
ICMM2005-75200 Fabrication of Polymeric Microfluidic Device for On-Chip Isolation of Nucleic AcidsBhattacharya, A. / Klapperich, C. / ASME et al. | 2005
- 553
-
ICMM2005-75030 Three-Dimensional Large-Scale Bubbly Flow Analysis in a Vertical MinichannelTakase, K. / ASME et al. | 2005
- 557
-
ICMM2005-75204 Direct Measurements of Viscoelastic Flows in Micro-ContractionsGulati, S. / Muller, S. J. / Liepmann, D. / ASME et al. | 2005
- 557
-
Direct measurements of viscoelastic flows in micro-contractionsGulati, Shelly / Muller, Susan J. / Liepmann, Dorian et al. | 2005
- 561
-
Assessment of void fraction correlations for adiabatic two-phase flows in microchannelsKawahara, Akimaro / Sadatomi, Michio / Kawaji, Masahiro / Okayama, Kazuya / Chung, P.M.Y. et al. | 2005
- 561
-
ICMM2005-75031 Assessment of Void Fraction Correlations for Adiabatic Two-Phase Flows in MicrochannelsKawahara, A. / Sadatomi, M. / Kawaji, M. / Okayama, K. / Chung, P. M.-Y. / ASME et al. | 2005
- 563
-
ICMM2005-75205 Spectrographic Microfluidic MemoryErickson, D. / Li, B. / Adleman, J. R. / Vyawahare, S. / Quake, S. / Psaltis, D. / ASME et al. | 2005
- 569
-
ICMM2005-75206 Optofluidic MicroscopyHeng, X. / Erickson, D. / Psaltis, D. / Yang, C. / ASME et al. | 2005
- 569
-
ICMM2005-75035 Effects of Surface Tension on Flow Characteristics of Two-Phase Annular Flow in Vertical Small Diameter PipesSadatomi, M. / Tsubone, H. / Kawahara, A. / Shiota, H. / ASME et al. | 2005
- 575
-
Micro heat exchanger for gas phase reactionYu, Sang-Phil / Lee, Seung-Jae / Song, Kwang-Sup et al. | 2005
- 575
-
ICMM2005-75213 Micro Heat Exchanger for Gas Phase ReactionYu, S.-P. / Lee, S.-J. / Song, K.-S. / ASME et al. | 2005
- 577
-
ICMM2005-75042 Oil-Water Two-Phase Flow in a Horizontal Microchannel: Pressure Drop and Flow PatternSalim, A. / Fourar, M. / Pironon, J. / Sausse, J. / ASME et al. | 2005
- 579
-
ICMM2005-75219 A Micro-Fabricated Electrical-Impedance-Based In-Flight Hematology AnalyzerLayton, B. E. / Jamieson, B. G. / Sullivan, S. M. / ASME et al. | 2005
- 585
-
ICMM2005-75057 Separation of Air From Two-Pase Air-Water Mixture Flowing in a Mini ChannelKariyasaki, A. / Yamasaki, Y. / Fukano, T. / Ousaka, A. / Morooka, S. / ASME et al. | 2005
- 585
-
ICMM2005-75233 Mechanical and Microfluidic Interconnects Fabricated in SU-8 PhotopolymerGray, B. L. / Jaffer, S. / ASME et al. | 2005
- 591
-
ICMM2005-75060 An Application of a Flow Pattern Coefficient in Two-Phase Flow of Air-Water Mixture in MinichannelsKeska, J. K. / ASME et al. | 2005
- 593
-
ICMM2005-75234 A Symmetry-Based Microfluidic Mixer for Rapid and Complete MixingColeman, J. T. / McKechnie, J. / Sinton, D. / ASME et al. | 2005
- 599
-
ICMM2005-75235 Three-Dimensional Microfluidic Focusing With Surface Charge PatterningColeman, J. T. / Sinton, D. / ASME et al. | 2005
- 601
-
ICMM2005-75061 An Application of Concomitant Measurements for Two-Phase Flow of Air-Water Mixture in MicrochannelsKeska, J. K. / ASME et al. | 2005
- 605
-
ICMM2005-75004 The Calculation of Viscosity and Thermal Conductivity for Nanofluids on the Basis of Statistical NanomechanicsAvsec, J. / Oblak, M. / ASME et al. | 2005
- 609
-
ICMM2005-75069 Quasi-Static Liquid/Air Drainage in Narrow ChannelsGeoffroy, S. / Plouraboue, F. / Amyot, O. / Prat, M. / ASME et al. | 2005
- 613
-
ICMM2005-75172 Selective Surface Modification and Patterning on Self-Assembled Monolayers by a Micro-Plasma DischargeChai, J. / Li, B. / Kwok, D. Y. / ASME et al. | 2005
- 615
-
ICMM2005-75110 An Experimental Investigation Into the Effect of Surfactants on Air-Water Two-Phase Flow in MinichannelsEnglish, N. J. / Kandlikar, S. G. / ASME et al. | 2005
- 615
-
An experimental investigation into the effect of surfactants on air-water two-phase flow in minichannelsEnglish, Nathan J. / Kandlikar, Satish G. et al. | 2005
- 617
-
ICMM2005-75177 On the Presence of Carbon Nanotubes During Streaming Potential Measurements in MicrofluidicsBhalla, S. / Lu, F. / Mansouri, A. / Chai, J. / Kwok, D. Y. / ASME et al. | 2005
- 621
-
ICMM2005-75178 Effect of Liquid-Solid Interaction on Liquid Transport Properties in a Nanometer Capillary TubeHuang, C. / Nandakumar, K. / Kwok, D. Y. / ASME et al. | 2005
- 625
-
ICMM2005-75118 Water Transport Visualization and Two-Phase Pressure Drop Measurements in a Simulated PEMFC Cathode MinichannelBorrelli, J. / Kandlikar, S. G. / Trabold, T. / Owejan, J. / ASME et al. | 2005
- 625
-
Water transport visualization and two-phase pressure drop measurements in a simulated PEMFC cathode minichannelBorrelli, John / Kandlikar, Satish G. / Trabold, Thomas / Owejan, Jon et al. | 2005
- 627
-
ICMM2005-75210 Evaluation of Continuum Mechanics for Electroosmotic Flow in Nanosize StructuresTaylor, J. / Ren, C. L. / ASME et al. | 2005
- 635
-
ICMM2005-75120 Two-Phase Flow Patterns in Converging or Diverging Microchannels With CO~2 Bubbles Produced by Chemical ReactionsFu, B. R. / Tseng, F. G. / Pan, C. / ASME et al. | 2005
- 635
-
ICMM2005-75211 Molecular Dynamic Simulation of Injection Flow in a Nano-Meter Syringe by Consideration of Extra Pairwise Interactions for Positive and Negative IonsHuang, C. / Nandakumar, K. / Kwok, D. Y. / ASME et al. | 2005
- 641
-
ICMM2005-75237 Interactions of Wall Roughness and Electroosmotic Flows Inside NanochannelsKim, D. / Darve, E. / ASME et al. | 2005
- 643
-
ICMM2005-75138 Marangoni Flow in a MicrochannelIchikawa, N. / Chung, P. M.-Y. / Maeda, R. / ASME et al. | 2005
- 643
-
Marangoni flow in a microchannelIchikawa, Naoki / Chung, Peter M.Y. / Maeda, Ryutaro et al. | 2005
- 647
-
ICMM2005-75025 Constructal Design of Forced Convection Cooled Microchannel Heat Sinks and Heat ExchangersMuzychka, Y. S. / ASME et al. | 2005
- 651
-
ICMM2005-75139 Numerical Analysis of Spreading of Liquid Droplet on a Heterogeneous Surface by the Lattice Boltzmann MethodChang, Q. / Alexander, J. I. D. / ASME et al. | 2005
- 657
-
Fabrication and testing of microstructure heat exchangers for thermal applicationsBrandner, Juergen J. / Schubert, Klaus et al. | 2005
- 657
-
ICMM2005-75071 Fabrication and Testing of Microstructure Heat Exchangers for Thermal ApplicationsBrandner, J. J. / Schubert, K. / ASME et al. | 2005
- 659
-
ICMM2005-75147 Frictional Pressure Drops of Single-Phase and Gas-Liquid Two-Phase Flows in Circular and Rectangle MicrochannelsOhtake, H. / Koizumi, Y. / Takahashi, H. / ASME et al. | 2005
- 659
-
Frictional pressure drops of single-phase and gas-liquid two-phase flows in circular and rectangular microchannelsOhtake, Hiroyasu / Koizumi, Yasuo / Takahashi, Hiroki et al. | 2005
- 665
-
ICMM2005-75158 Experimental Study on Evaporative Heat Transfer of Air-Water Bubbly FlowChen, Q. / Amano, R. S. / ASME et al. | 2005
- 667
-
ICMM2005-75114 Single-Phase Liquid Heat Transfer in MicrochannelsSteinke, M. E. / Kandlikar, S. G. / ASME et al. | 2005
- 671
-
ICMM2005-75159 CFD Simulations of Gas and Liquid Slugs for Taylor Flow in a MicrochannelQian, D. / Lawal, A. / ASME et al. | 2005
- 671
-
CFD simulations of gas and liquid slugs for taylor flow in a microchannelQian, Dongying / Lawal, Adeniyi et al. | 2005
- 679
-
ICMM2005-75190 Effect of Surface Tension on Stratified Flow in MicrochannelYap, Y. F. / Chai, J. C. / Toh, K. C. / Wong, T. N. / ASME et al. | 2005
- 679
-
ICMM2005-75218 Heat Transfer Characteristics of the Mini Channel Compact Heat Exchanger Using Copper Wire Spring FinsIm, Y.-B. / Lee, K.-T. / Jon, J.-S. K. / Choi, Y.-H. / ASME et al. | 2005
- 685
-
Hydrogen-water flow regime transitions applied to anode flow phenomena in a PEMFCOwejan, J.P. / Trabold, T.A. / Tighe, T.W. et al. | 2005
- 685
-
ICMM2005-75249 High Performance Micro-Channel Cross Flow Heat ExchangersKelly, K. W. / McCandless, A. / Marques, C. / Turner, R. A. / Motakef, S. / ASME et al. | 2005
- 685
-
ICMM2005-75198 Hydrogen-Water Flow Regime Transitions Applied to Anode Flow Phenomena in a PEMFCOwejan, J. P. / Trabold, T. A. / Tighe, T. W. / ASME et al. | 2005
- 691
-
ICMM2005-75244 Two-Phase Flow in Square Mini-channels: Flow Pattern TransitionMorgante, A.-M. / Fabre, J. / ASME et al. | 2005
- 697
-
ICMM2005-75251 Numerical Simulation of Flow Through Microchannels in Bipolar PlateRawool, A. S. / Mitra, S. K. / Agrawal, A. / Kandlikar, S. / ASME et al. | 2005
- 703
-
A study on the response of a liquid slug pulled by a ferrofluid under the influence of a maganetic field in a microchannelShibata, Yuichi / Ikeda, Koh / Oshikubo, Takeshi / Kawaji, Masahiro et al. | 2005
- 703
-
ICMM2005-75255 A Study on the Response of a Liquid Slug Pulled by a Ferrofluid Under the Influence of a Magnetic Field in a MicrochannelShibata, Y. / Ikeda, K. / Oshikubo, T. / Kawaji, M. / ASME et al. | 2005
- 709
-
ICMM2005-75261 Water Slug Detachment in Two-Phase Hydrophobic Microchannel FlowsHidrovo, C. H. / Wang, F.-M. / Steinbrenner, J. E. / Lee, E. S. / Vigneron, S. / Cheng, C.-H. / Eaton, J. K. / Goodson, K. E. / ASME et al. | 2005
- 717
-
ICMM2005-75248 Measurement and Modeling of Condensation Heat Transfer Coefficients in Circular MicrochannelsBandhauer, T. M. / Agarwal, A. / Garimella, S. / ASME et al. | 2005
- 729
-
ICMM2005-75260 Film Condensation in Horizontal Microchannels: Effect of Channel ShapeWang, H. / Rose, J. W. / ASME et al. | 2005
- 737
-
Impedance analysis of blood coagulation by prothrombin time assay in a miniature deviceZhou, Ronghui / Chang, BinWha / Chang, Hsueh-Chia et al. | 2005
- 737
-
ICMM2005-75155 Impedance Analysis of Blood Coagulation by Prothrombin Time Assay in a Miniature DeviceZhou, R. / Chang, B. W. / Chang, H.-C. / ASME et al. | 2005
- 743
-
ICMM2005-75173 A Microfluidic Model for the Migration of Chondrocyte Under Pulsed Electromagnetic FieldTang, Y. / Tian, F. / Lou, E. / Bagnall, K. / Cinats, J. / Jomha, N. / Raso, J. / Kwok, D. Y. / ASME et al. | 2005
- 751
-
ICMM2005-75217 Using a Laminar Flow System to Explain Shear-Enhanced Bacterial AdhesionThomas, W. E. / ASME et al. | 2005
- 761
-
ICMM2005-75220 CFD Analysis of a Bioreactor for Cartilage Tissue EngineeringLamkin-Kennard, K. A. / King, M. R. / Awad, H. A. / ASME et al. | 2005
- 769
-
DNA purification of biothreat agents using a micropillar chipNess, Kevin D. / Mariella, Raymond P. jun. / Long, Gary W. / Goodson, Kenneth E. / Belgrader, Phillip et al. | 2005
- 769
-
ICMM2005-75246 DNA Purification of Biothreat Agents Using a Micropillar ChipNess, K. D. / Mariella, R. P. / Long, G. W. / Goodson, K. E. / Belgrader, P. / ASME et al. | 2005